scsi: qla2xxx: Remove unintended flag clearing

commit 7e8a936a2d0f98dd6e5d05d4838affabe606cabc upstream.

FCF_ASYNC_SENT flag is used in session management. This flag is cleared in
task management path by accident.  Remove unintended flag clearing.

Fixes: 388a49959ee4 ("scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests

commit c75e6aef5039830cce5d4cf764dd204522f89e6b upstream.

The following message and call trace was seen with debug kernels:

DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
 check_unmap+0xf42/0x1990

Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]

Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning.

Fixes: c85ab7d9e27a ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Check if port is online before sending ELS

commit 0c227dc22ca18856055983f27594feb2e0149965 upstream.

CT Ping and ELS cmds fail for NVMe targets.  Check if port is online before
sending ELS instead of sending login.

Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix link failure in NPIV environment

commit b1ae65c082f74536ec292b15766f2846f0238373 upstream.

User experienced symptoms of adapter failure in NPIV environment. NPIV
hosts were allowed to trigger chip reset back to back due to NPIV link
state being slow to come online.

Fix link failure in NPIV environment by removing NPIV host from directly
being able to perform chip reset.

 kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP.
 kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP.
 kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP.
 kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP

Fixes: 0d6e61bc6a4f ("[SCSI] qla2xxx: Correct various NPIV issues.")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/bootconfig: fix single & used for logical condition

commit cf8c59a3756b2735c409a9b3ac1e4ec556546a7a upstream.

A single & will create a background process and return true, so the grep
command will run even if the file checked in the first condition does not
exist.

Link: https://lore.kernel.org/all/20230112114215.17103-1-antonio.feijoo@suse.com/
Fixes: 1eaad3ac3f39 ("tools/bootconfig: Use per-group/all enable option in ftrace2bconf script")
Signed-off-by: Antonio Alvarez Feijoo <antonio.feijoo@suse.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Handle race between rb_move_tail and rb_check_pages

commit 8843e06f67b14f71c044bf6267b2387784c7e198 upstream.

It seems a data race between ring_buffer writing and integrity check.
That is, RB_FLAG of head_page is been updating, while at same time
RB_FLAG was cleared when doing integrity check rb_check_pages():

  rb_check_pages()            rb_handle_head_page():
  --------                    --------
  rb_head_page_deactivate()
                              rb_head_page_set_normal()
  rb_head_page_activate()

We do intergrity test of the list to check if the list is corrupted and
it is still worth doing it. So, let's refactor rb_check_pages() such that
we no longer clear and set flag during the list sanity checking.

[1] and [2] are the test to reproduce and the crash report respectively.

1:
``` read_trace.sh
  while true;
  do
    # the "trace" file is closed after read
    head -1 /sys/kernel/tracing/trace > /dev/null
  done
```
``` repro.sh
  sysctl -w kernel.panic_on_warn=1
  # function tracer will writing enough data into ring_buffer
  echo function > /sys/kernel/tracing/current_tracer
  ./read_trace.sh &
  ./read_trace.sh &
  ./read_trace.sh &
  ./read_trace.sh &
  ./read_trace.sh &
  ./read_trace.sh &
  ./read_trace.sh &
  ./read_trace.sh &
```

2:
------------[ cut here ]------------
WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653
rb_move_tail+0x450/0x470
Modules linked in:
CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G        W          6.2.0-rc6+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_move_tail+0x450/0x470
Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24
83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83
f8 02 0f 84 ce fb ff ff e9 db
RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203
RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18
RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400
RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2
R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000
R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108
FS:  0000000000000000(0000) GS:ffff9db3bdcc0000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0
Call Trace:
 <TASK>
 ring_buffer_lock_reserve+0x136/0x360
 ? __do_softirq+0x287/0x2df
 ? __pfx_rcu_softirq_qs+0x10/0x10
 trace_function+0x21/0x110
 ? __pfx_rcu_softirq_qs+0x10/0x10
 ? __do_softirq+0x287/0x2df
 function_trace_call+0xf6/0x120
 0xffffffffc038f097
 ? rcu_softirq_qs+0x5/0x140
 rcu_softirq_qs+0x5/0x140
 __do_softirq+0x287/0x2df
 run_ksoftirqd+0x2a/0x30
 smpboot_thread_fn+0x188/0x220
 ? __pfx_smpboot_thread_fn+0x10/0x10
 kthread+0xe7/0x110
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2c/0x50
 </TASK>
---[ end trace 0000000000000000 ]---

[ crash report and test reproducer credit goes to Zheng Yejian]

Link: https://lore.kernel.org/linux-trace-kernel/1676376403-16462-1-git-send-email-quic_mojha@quicinc.com
Cc: <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ktest.pl: Add RUN_TIMEOUT option with default unlimited

commit 4e7d2a8f0b52abf23b1dc13b3d88bc0923383cd5 upstream.

There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.

Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".

But this fixes the hang that happens when the pipe is full and the ssh
session never exits.

Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ktest.pl: Fix missing "end_monitor" when machine check fails

commit e8bf9b98d40dbdf4e39362e3b85a70c61da68cb7 upstream.

In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.

In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.

Cc: stable@vger.kernel.org
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ktest.pl: Give back console on Ctrt^C on monitor

commit 83d29d439cd3ef23041570d55841f814af2ecac0 upstream.

When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).

Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.

Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb90e7 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/thp: check and bail out if page in deferred queue already

commit 81e506bec9be1eceaf5a2c654e28ba5176ef48d8 upstream.

Kernel build regression with LLVM was reported here:
https://lore.kernel.org/all/Y1GCYXGtEVZbcv%2F5@dev-arch.thelio-3990X/ with
commit f35b5d7d676e ("mm: align larger anonymous mappings on THP
boundaries").  And the commit f35b5d7d676e was reverted.

It turned out the regression is related with madvise(MADV_DONTNEED)
was used by ld.lld. But with none PMD_SIZE aligned parameter len.
trace-bpfcc captured:
531607  531732  ld.lld          do_madvise.part.0 start: 0x7feca9000000, len: 0x7fb000, behavior: 0x4
531607  531793  ld.lld          do_madvise.part.0 start: 0x7fec86a00000, len: 0x7fb000, behavior: 0x4

If the underneath physical page is THP, the madvise(MADV_DONTNEED) can
trigger split_queue_lock contention raised significantly. perf showed
following data:
    14.85%     0.00%  ld.lld           [kernel.kallsyms]           [k]
       entry_SYSCALL_64_after_hwframe
           11.52%
                entry_SYSCALL_64_after_hwframe
                do_syscall_64
                __x64_sys_madvise
                do_madvise.part.0
                zap_page_range
                unmap_single_vma
                unmap_page_range
                page_remove_rmap
                deferred_split_huge_page
                __lock_text_start
                native_queued_spin_lock_slowpath

If THP can't be removed from rmap as whole THP, partial THP will be
removed from rmap by removing sub-pages from rmap.  Even the THP head page
is added to deferred queue already, the split_queue_lock will be acquired
and check whether the THP head page is in the queue already.  Thus, the
contention of split_queue_lock is raised.

Before acquire split_queue_lock, check and bail out early if the THP
head page is in the queue already. The checking without holding
split_queue_lock could race with deferred_split_scan, but it doesn't
impact the correctness here.

Test result of building kernel with ld.lld:
commit 7b5a0b664ebe (parent commit of f35b5d7d676e):
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
        6:07.99 real,   26367.77 user,  5063.35 sys

commit f35b5d7d676e:
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
        7:22.15 real,   26235.03 user,  12504.55 sys

commit f35b5d7d676e with the fixing patch:
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
        6:08.49 real,   26520.15 user,  5047.91 sys

Link: https://lkml.kernel.org/r/20221223135207.2275317-1-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcontrol: deprecate charge moving

commit da34a8484d162585e22ed8c1e4114aa2f60e3567 upstream.

Charge moving mode in cgroup1 allows memory to follow tasks as they
migrate between cgroups.  This is, and always has been, a questionable
thing to do - for several reasons.

First, it's expensive.  Pages need to be identified, locked and isolated
from various MM operations, and reassigned, one by one.

Second, it's unreliable.  Once pages are charged to a cgroup, there isn't
always a clear owner task anymore.  Cache isn't moved at all, for example.
Mapped memory is moved - but if trylocking or isolating a page fails,
it's arbitrarily left behind.  Frequent moving between domains may leave a
task's memory scattered all over the place.

Third, it isn't really needed.  Launcher tasks can kick off workload tasks
directly in their target cgroup.  Using dedicated per-workload groups
allows fine-grained policy adjustments - no need to move tasks and their
physical pages between control domains.  The feature was never
forward-ported to cgroup2, and it hasn't been missed.

Despite it being a niche usecase, the maintenance overhead of supporting
it is enormous.  Because pages are moved while they are live and subject
to various MM operations, the synchronization rules are complicated.
There are lock_page_memcg() in MM and FS code, which non-cgroup people
don't understand.  In some cases we've been able to shift code and cgroup
API calls around such that we can rely on native locking as much as
possible.  But that's fragile, and sometimes we need to hold MM locks for
longer than we otherwise would (pte lock e.g.).

Mark the feature deprecated. Hopefully we can remove it soon.

And backport into -stable kernels so that people who develop against
earlier kernels are warned about this deprecation as early as possible.

[akpm@linux-foundation.org: fix memory.rst underlining]
Link: https://lkml.kernel.org/r/Y5COd+qXwk/S+n8N@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: gdbmacros: print newest record

commit f2e4cca2f670c8e52fbb551a295f2afc9aa2bd72 upstream.

@head_id points to the newest record, but the printing loop
exits when it increments to this value (before printing).

Exit the printing loop after the newest record has been printed.

The python-based function in scripts/gdb/linux/dmesg.py already
does this correctly.

Fixes: e60768311af8 ("scripts/gdb: update for lockless printk ringbuffer")
Cc: stable@vger.kernel.org
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20221229134339.197627-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc/mtk_scp: Move clk ops outside send_lock

commit e46ceea3148163166ef9b7bcac578e72dd30c064 upstream.

Clocks are properly reference counted and do not need to be inside the
lock range.

Right now this triggers a false-positive lockdep warning on MT8192 based
Chromebooks, through a combination of mtk-scp that has a cros-ec-rpmsg
sub-device, the (actual) cros-ec I2C adapter registration, I2C client
(not on cros-ec) probe doing i2c transfers and enabling clocks.

This is a false positive because the cros-ec-rpmsg under mtk-scp does
not have an I2C adapter, and also each I2C adapter and cros-ec instance
have their own mutex.

Move the clk operations outside of the send_lock range.

Fixes: 63c13d61eafe ("remoteproc/mediatek: add SCP support for mt8183")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230104083110.736377-1-wenst@chromium.org
[Fixed "Fixes:" tag line]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ipu3-cio2: Fix PM runtime usage_count in driver unbind

commit 909d3096ac99fa2289f9b8945a3eab2269947a0a upstream.

Get the PM runtime usage_count and forbid PM runtime at driver unbind. The
opposite is being done in probe() already.

Fixes: commit c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Cc: stable@vger.kernel.org # for >= 4.16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips: fix syscall_get_nr

commit 85cc91e2ba4262a602ec65e2b76c4391a9e60d3d upstream.

The implementation of syscall_get_nr on mips used to ignore the task
argument and return the syscall number of the calling thread instead of
the target thread.

The bug was exposed to user space by commit 201766a20e30f ("ptrace: add
PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.

Link: https://github.com/strace/strace/issues/235
Fixes: c2d9f1775731 ("MIPS: Fix syscall_get_nr for the syscall exit tracing.")
Cc: <stable@vger.kernel.org> # v3.19+
Co-developed-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Elvira Khabirova <lineprinter0@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dax/kmem: Fix leak of memory-hotplug resources

commit e686c32590f40bffc45f105c04c836ffad3e531a upstream.

While experimenting with CXL region removal the following corruption of
/proc/iomem appeared.

Before:
f010000000-f04fffffff : CXL Window 0
  f010000000-f02fffffff : region4
    f010000000-f02fffffff : dax4.0
      f010000000-f02fffffff : System RAM (kmem)

After (modprobe -r cxl_test):
f010000000-f02fffffff : **redacted binary garbage**
  f010000000-f02fffffff : System RAM (kmem)

...and testing further the same is visible with persistent memory
assigned to kmem:

Before:
480000000-243fffffff : Persistent Memory
  480000000-57e1fffff : namespace3.0
  580000000-243fffffff : dax3.0
    580000000-243fffffff : System RAM (kmem)

After (ndctl disable-region all):
480000000-243fffffff : Persistent Memory
  580000000-243fffffff : ***redacted binary garbage***
    580000000-243fffffff : System RAM (kmem)

The corrupted data is from a use-after-free of the "dax4.0" and "dax3.0"
resources, and it also shows that the "System RAM (kmem)" resource is
not being removed. The bug does not appear after "modprobe -r kmem", it
requires the parent of "dax4.0" and "dax3.0" to be removed which
re-parents the leaked "System RAM (kmem)" instances. Those in turn
reference the freed resource as a parent.

First up for the fix is release_mem_region_adjustable() needs to
reliably delete the resource inserted by add_memory_driver_managed().
That is thwarted by a check for IORESOURCE_SYSRAM that predates the
dax/kmem driver, from commit:

65c78784135f ("kernel, resource: check for IORESOURCE_SYSRAM in release_mem_region_adjustable")

That appears to be working around the behavior of HMM's
"MEMORY_DEVICE_PUBLIC" facility that has since been deleted. With that
check removed the "System RAM (kmem)" resource gets removed, but
corruption still occurs occasionally because the "dax" resource is not
reliably removed.

The dax range information is freed before the device is unregistered, so
the driver can not reliably recall (another use after free) what it is
meant to release. Lastly if that use after free got lucky, the driver
was covering up the leak of "System RAM (kmem)" due to its use of
release_resource() which detaches, but does not free, child resources.
The switch to remove_resource() forces remove_memory() to be responsible
for the deletion of the resource added by add_memory_driver_managed().

Fixes: c2f3011ee697 ("device-dax: add an allocation interface for device-dax instances")
Cc: <stable@vger.kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167653656244.3147810.5705900882794040229.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: fix FEN fault handling

commit 977a3009547dad4a5bc95d91be4a58c9f7eedac0 upstream.

Type 3 instruction fault (FPU insn with FPU disabled) is handled
by quietly enabling FPU and returning.  Which is fine, except that
we need to do that both for fault in userland and in the kernel;
the latter *can* legitimately happen - all it takes is this:

.global _start
_start:
        call_pal 0xae
lda $0, 0
ldq $0, 0($0)

- call_pal CLRFEN to clear "FPU enabled" flag and arrange for
a signal delivery (SIGSEGV in this case).

Fixed by moving the handling of type 3 into the common part of
do_entIF(), before we check for kernel vs. user mode.

Incidentally, the check for kernel mode is unidiomatic; the normal
way to do that is !user_mode(regs).  The difference is that
the open-coded variant treats any of bits 63..3 of regs->ps being
set as "it's user mode" while the normal approach is to check just
the bit 3.  PS is a 4-bit register and regs->ps always will have
bits 63..4 clear, so the open-coded variant here is actually equivalent
to !user_mode(regs).  Harder to follow, though...

Cc: stable@vger.kernel.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: update the time stamps and try to drop the suid/sgid

commit e027253c4b77d395798600a90b6a96fe4adf4d5e upstream.

The fallocate will try to clear the suid/sgid if a unprevileged user
changed the file.

There is no POSIX item requires that we should clear the suid/sgid
in fallocate code path but this is the default behaviour for most of
the filesystems and the VFS layer. And also the same for the write
code path, which have already support it.

And also we need to update the time stamps since the fallocate will
change the file contents.

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/58054
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails

commit f7c4d9b133c7a04ca619355574e96b6abf209fba upstream.

If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add().  The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().

Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.

Cc: stable@vger.kernel.org
Fixes: 1643dfa4c2c8 ("rbd: introduce a per-device ordered workqueue")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: add inode/permission checks to fileattr_get/fileattr_set

commit 1cc4606d19e3710bfab3f6704b87ff9580493c69 upstream.

It looks like these checks were accidentally lost during the conversion to
fileattr API.

Fixes: 72227eac177d ("fuse: convert to fileattr")
Cc: <stable@vger.kernel.org> # v5.13
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct TMU phandle in Odroid HC1

commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.  This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:

  thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
  thermal_sys: Failed to find thermal zone for tmu id=0
  exynos-tmu 10064000.tmu: Failed to register sensor: -2
  exynos-tmu: probe of 10064000.tmu failed with error -2

Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct TMU phandle in Odroid XU

commit 9372eca505e7a19934d750b4b4c89a3652738e66 upstream.

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.  Since thermal-sensors property
is already defined in included exynosi5410.dtsi, drop it from
exynos5410-odroidxu.dts to fix the error and remoev redundancy.

Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct TMU phandle in Exynos5250

commit 33e2c595e2e4016991ead44933a29d1ef93d5f26 upstream.

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.

Cc: <stable@vger.kernel.org>
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct TMU phandle in Odroid XU3 family

commit a3583e92d188ec6c58c7f603ac5e72dd8a11c21a upstream.

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.  This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:

  thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
  thermal_sys: Failed to find thermal zone for tmu id=0
  exynos-tmu 10064000.tmu: Failed to register sensor: -2
  exynos-tmu: probe of 10064000.tmu failed with error -2

Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct TMU phandle in Exynos4

commit 8e4505e617a80f601e2f53a917611777f128f925 upstream.

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.

Fixes: 328829a6ad70 ("ARM: dts: define default thermal-zones for exynos4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct TMU phandle in Exynos4210

commit 408ab6786dbf6dd696488054c9559681112ef994 upstream.

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.  Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.

Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node

commit af4ab377543853b690cc85b4c46cf976ab560dc2 upstream.

SDX55 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.

Cc: <stable@vger.kernel.org> # 5.12
Fixes: a2bdfdfba2af ("ARM: dts: qcom: sdx55: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm flakey: fix a bug with 32-bit highmem systems

commit 8eb29c4fbf9661e6bd4dd86197a37ffe0ecc9d50 upstream.

The function page_address does not work with 32-bit systems with high
memory. Use bvec_kmap_local/kunmap_local instead.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm flakey: don't corrupt the zero page

commit f50714b57aecb6b3dc81d578e295f86d9c73f078 upstream.

When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.

Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case.

Cc: stable@vger.kernel.org
Fixes: a00f5276e266 ("dm flakey: Properly corrupt multi-page bios.")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm flakey: fix logic when corrupting a bio

commit aa56b9b75996ff4c76a0a4181c2fa0206c3d91cc upstream.

If "corrupt_bio_byte" is set to corrupt reads and corrupt_bio_flags is
used, dm-flakey would erroneously return all writes as errors. Likewise,
if "corrupt_bio_byte" is set to corrupt writes, dm-flakey would return
errors for all reads.

Fix the logic so that if fc->corrupt_bio_byte is non-zero, dm-flakey
will not abort reads on writes with an error.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: intel: powerclamp: Fix cur_state for multi package system

commit 8e47363588377e1bdb65e2b020b409cfb44dd260 upstream.

The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.

It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.

For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.

Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.

Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qede: fix interrupt coalescing configuration

commit 908d4bb7c54caa58253a363d63e797a468eaf321 upstream.

On default driver load device gets configured with unexpected
higher interrupt coalescing values instead of default expected
values as memory allocated from krealloc() is not supposed to
be zeroed out and may contain garbage values.

Fix this by allocating the memory of required size first with
kcalloc() and then use krealloc() to resize and preserve the
contents across down/up of the interface.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Fixes: b0ec5489c480 ("qede: preserve per queue stats across up/down of interface")
Cc: stable@vger.kernel.org
Cc: Bhaskar Upadhaya <bupadhaya@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2160054
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: Fix use after free for wext

commit 015b8cc5e7c4d7bb671f1984d7b7338c310b185b upstream.

Key information in wext.connect is not reset on (re)connect and can hold
data from a previous connection.

Reset key data to avoid that drivers or mac80211 incorrectly detect a
WEP connection request and access the freed or already reused memory.

Additionally optimize cfg80211_sme_connect() and avoid an useless
schedule of conn_work.

Fixes: fffd0934b939 ("cfg80211: rework key operation")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230124141856.356646-1-alexander@wetzel-home.de
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: ath11k: allow system suspend to survive ath11k

commit 7c15430822e71e90203d87e6d0cfe83fa058b0dc upstream.

When ath11k runs into internal errors upon suspend,
it returns an error code to pci_pm_suspend, which
aborts the entire system suspend.

The driver should not abort system suspend, but should
keep its internal errors to itself, and allow the system
to suspend.  Otherwise, a user can suspend a laptop
by closing the lid and sealing it into a case, assuming
that is will suspend, rather than heating up and draining
the battery when in transit.

In practice, the ath11k device seems to have plenty of transient
errors, and subsequent suspend cycles after this failure
often succeed.

https://bugzilla.kernel.org/show_bug.cgi?id=216968

Fixes: d1b0c33850d29 ("ath11k: implement suspend for QCA6390 PCI devices")
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230201183201.14431-1-len.brown@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: rtl8xxxu: Use a longer retry limit of 48

commit 2a86aa9a1892d60ef2e3f310f5b42b8b05546d65 upstream.

The Realtek rate control algorithm goes back and forth a lot between
the highest and the lowest rate it's allowed to use. This is due to
a lot of frames being dropped because the retry limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS are too low. (Experimentally, they
are 4 for long frames and 7 for short frames.)

The vendor drivers hardcode the value 48 for both retry limits (for
station mode), which makes dropped frames very rare and thus the rate
control is more stable.

Because most Realtek chips handle the rate control in the firmware,
which can't be modified, ignore the limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS and use the value 48 (set during
chip initialisation), same as the vendor drivers.

Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/477d745b-6bac-111d-403c-487fc19aa30d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: add cond_resched() to dm_wq_work()

commit 0ca44fcef241768fd25ee763b3d203b9852f269b upstream.

Otherwise the while() loop in dm_wq_work() can result in a "dead
loop" on systems that have preemption disabled. This is particularly
problematic on single cpu systems.

Cc: stable@vger.kernel.org
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: send just one event on resize, not two

commit 7533afa1d27ba1234146d31d2402c195cf195962 upstream.

Device mapper sends an uevent when the device is suspended, using the
function set_capacity_and_notify. However, this causes a race condition
with udev.

Udev skips scanning dm devices that are suspended. If we send an uevent
while we are suspended, udev will be racing with device mapper resume
code. If the device mapper resume code wins the race, udev will process
the uevent after the device is resumed and it will properly scan the
device.

However, if udev wins the race, it will receive the uevent, find out that
the dm device is suspended and skip scanning the device. This causes bugs
such as systemd unmounting the device - see
https://bugzilla.redhat.com/show_bug.cgi?id=2158628

This commit fixes this race.

We replace the function set_capacity_and_notify with set_capacity, so that
the uevent is not sent at this point. In do_resume, we detect if the
capacity has changed and we pass a boolean variable need_resize_uevent to
dm_kobject_uevent. dm_kobject_uevent adds "RESIZE=1" to the uevent if
need_resize_uevent is set.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Peter Rajnoha <prajnoha@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type

commit f0f0cfdc3a024e21161714f2e05f0df3b84d42ad upstream.

spi_nor_set_erase_type() was used either to set or to mask out an erase
type. When we used it to mask out an erase type a shift-out-of-bounds
was hit:
UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
shift exponent 4294967295 is too large for 32-bit type 'int'

The setting of the size_{shift, mask} and of the opcode are unnecessary
when the erase size is zero, as throughout the code just the erase size
is considered to determine whether an erase type is supported or not.
Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF
is an unused opcode. Thus when masking out an erase type, just set the
erase size to zero. This will fix the shift-out-of-bounds.

Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Cc: stable@vger.kernel.org
Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
Signed-off-by: Louis Rannou <lrannou@baylibre.com>
Tested-by: Alexander Stein <Alexander.Stein@tq-group.com>
Link: https://lore.kernel.org/r/20230203070754.50677-1-tudor.ambarus@linaro.org
[ta: refine changes, new commit message, fix compilation error]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: spansion: Consider reserved bits in CFR5 register

commit 3f592a869f87723314f0cb1ac232bd3bf8245be8 upstream.

CFR5[6] is reserved bit and must be always 1. Set it to comply with flash
requirements. While fixing SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_{EN, DS}
definition, stop using magic numbers and describe the missing bit fields
in CFR5 register. This is useful for both readability and future possible
addition of Octal STR mode support.

Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Cc: stable@vger.kernel.org
Reported-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/linux-mtd/20230110164703.83413-1-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: sfdp: Fix index value for SCCR dwords

commit ad9679f3811899fd1c21dc7bdd715e8e1cfb46b9 upstream.

Array index for SCCR 22th DOWRD should be 21.

Fixes: 981a8d60e01f ("mtd: spi-nor: Parse SFDP SCCR Map")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d8a2a77c2c95cf776e7dcae6392d29fdcf5d6307.1672026365.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: refuse to create ea block when umounted

commit f31173c19901a96bb2ebf6bcfec8a08df7095c91 upstream.

The ea block expansion need to access s_root while it is
already set as NULL when umount is triggered. Refuse this
request to avoid panic.

Reported-by: syzbot+2dacb8f015bf1420155f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3613786cb88c93aa1c6a279b1df6a7b201347d08
Link: https://lore.kernel.org/r/20230103014517.495275-3-jun.nie@linaro.org
Cc: stable@kernel.org
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: optimize ea_inode block expansion

commit 1e9d62d252812575ded7c620d8fc67c32ff06c16 upstream.

Copy ea data from inode entry when expanding ea block if possible.
Then remove the ea entry if expansion success. Thus memcpy to a
temporary buffer may be avoided.

If the expansion fails, we do not need to recovery the removed ea
entry neither in this way.

Reported-by: syzbot+2dacb8f015bf1420155f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3613786cb88c93aa1c6a279b1df6a7b201347d08
Link: https://lore.kernel.org/r/20230103014517.495275-2-jun.nie@linaro.org
Cc: stable@kernel.org
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix data missing when reusing bh which is ready to be checkpointed

commit e6b9bd7290d334451ce054e98e752abc055e0034 upstream.

Following process will make data lost and could lead to a filesystem
corrupted problem:

1. jh(bh) is inserted into T1->t_checkpoint_list, bh is dirty, and
   jh->b_transaction = NULL
2. T1 is added into journal->j_checkpoint_transactions.
3. Get bh prepare to write while doing checkpoing:
           PA     PB
   do_get_write_access             jbd2_log_do_checkpoint
    spin_lock(&jh->b_state_lock)
     if (buffer_dirty(bh))
      clear_buffer_dirty(bh)   // clear buffer dirty
       set_buffer_jbddirty(bh)
    transaction =
    journal->j_checkpoint_transactions
    jh = transaction->t_checkpoint_list
    if (!buffer_dirty(bh))
                      __jbd2_journal_remove_checkpoint(jh)
      // bh won't be flushed
                    jbd2_cleanup_journal_tail
    __jbd2_journal_file_buffer(jh, transaction, BJ_Reserved)
4. Aborting journal/Power-cut before writing latest bh on journal area.

In this way we get a corrupted filesystem with bh's data lost.

Fix it by moving the clearing of buffer_dirty bit just before the call
to __jbd2_journal_file_buffer(), both bit clearing and jh->b_transaction
assignment are under journal->j_list_lock locked, so that
jbd2_log_do_checkpoint() will wait until jh's new transaction fininshed
even bh is currently not dirty. And journal_shrink_one_cp_list() won't
remove jh from checkpoint list if the buffer head is reused in
do_get_write_access().

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216898
Cc: <stable@kernel.org>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: zhanchengbin <zhanchengbin1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110015327.1181863-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC

commit ea24b9953bcd3889f77a66e7f1d7e86e995dd9c3 upstream.

HP EliteDesk 800 G6 Tower PC (103c:870c) requires a quirk for enabling
headset-mic.

Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217008
Link: https://lore.kernel.org/r/20230223074749.1026060-1-l.stelmach@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()

commit 951606a14a8901e3551fe4d8d3cedd73fe954ce1 upstream.

If snd_ctl_add() fails in aureon_add_controls(), it immediately returns
and leaves ice->gpio_mutex locked. ice->gpio_mutex locks in
snd_ice1712_save_gpio_status and unlocks in
snd_ice1712_restore_gpio_status(ice).

It seems that the mutex is required only for aureon_cs8415_get(),
so snd_ice1712_restore_gpio_status(ice) can be placed
just after that. Compile tested only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230225184322.6286-1-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/poll: allow some retries for poll triggering spuriously

commit c16bda37594f83147b167d381d54c010024efecf upstream.

If we get woken spuriously when polling and fail the operation with
-EAGAIN again, then we generally only allow polling again if data
had been transferred at some point. This is indicated with
REQ_F_PARTIAL_IO. However, if the spurious poll triggers when the socket
was originally empty, then we haven't transferred data yet and we will
fail the poll re-arm. This either punts the socket to io-wq if it's
blocking, or it fails the request with -EAGAIN if not. Neither condition
is desirable, as the former will slow things down, while the latter
will make the application confused.

We want to ensure that a repeated poll trigger doesn't lead to infinite
work making no progress, that's what the REQ_F_PARTIAL_IO check was
for. But it doesn't protect against a loop post the first receive, and
it's unnecessarily strict if we started out with an empty socket.

Add a somewhat random retry count, just to put an upper limit on the
potential number of retries that will be done. This should be high enough
that we won't really hit it in practice, unless something needs to be
aborted anyway.

Cc: stable@vger.kernel.org # v5.10+
Link: https://github.com/axboe/liburing/issues/364
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: remove MSG_NOSIGNAL from recvmsg

commit 7605c43d67face310b4b87dee1a28bc0c8cd8c0f upstream.

MSG_NOSIGNAL is not applicable for the receiving side, SIGPIPE is
generated when trying to write to a "broken pipe".  AF_PACKET's
packet_recvmsg() does enforce this, giving back EINVAL when MSG_NOSIGNAL
is set - making it unuseable in io_uring's recvmsg.

Remove MSG_NOSIGNAL from io_recvmsg_prep().

Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230224150123.128346-1-equinox@diac24.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/rsrc: disallow multi-source reg buffers

commit edd478269640b360c6f301f2baa04abdda563ef3 upstream.

If two or more mappings go back to back to each other they can be passed
into io_uring to be registered as a single registered buffer. That would
even work if mappings came from different sources, e.g. it's possible to
mix in this way anon pages and pages from shmem or hugetlb. That is not
a problem but it'd rather be less prone if we forbid such mixing.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: add a conditional reschedule to the IOPOLL cancelation loop

commit fcc926bb857949dbfa51a7d95f3f5ebc657f198c upstream.

If the kernel is configured with CONFIG_PREEMPT_NONE, we could be
sitting in a tight loop reaping events but not giving them a chance to
finish. This results in a trace ala:

rcu: INFO: rcu_sched self-detected stall on CPU
rcu:    2-...!: (5249 ticks this GP) idle=935c/1/0x4000000000000000 softirq=4265/4274 fqs=1
        (t=5251 jiffies g=465 q=4135 ncpus=4)
rcu: rcu_sched kthread starved for 5249 jiffies! g465 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu:    Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_sched       state:R  running task     stack:0     pid:12    ppid:2      flags:0x00000008
Call trace:
 __switch_to+0xb0/0xc8
 __schedule+0x43c/0x520
 schedule+0x4c/0x98
 schedule_timeout+0xbc/0xdc
 rcu_gp_fqs_loop+0x308/0x344
 rcu_gp_kthread+0xd8/0xf0
 kthread+0xb8/0xc8
 ret_from_fork+0x10/0x20
rcu: Stack dump where RCU GP kthread last ran:
Task dump for CPU 0:
task:kworker/u8:10   state:R  running task     stack:0     pid:89    ppid:2      flags:0x0000000a
Workqueue: events_unbound io_ring_exit_work
Call trace:
 __switch_to+0xb0/0xc8
 0xffff0000c8fefd28
CPU: 2 PID: 95 Comm: kworker/u8:13 Not tainted 6.2.0-rc5-00042-g40316e337c80-dirty #2759
Hardware name: linux,dummy-virt (DT)
Workqueue: events_unbound io_ring_exit_work
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : io_do_iopoll+0x344/0x360
lr : io_do_iopoll+0xb8/0x360
sp : ffff800009bebc60
x29: ffff800009bebc60 x28: 0000000000000000 x27: 0000000000000000
x26: ffff0000c0f67d48 x25: ffff0000c0f67840 x24: ffff800008950024
x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c27d3200
x20: ffff0000c0f67840 x19: ffff0000c0f67800 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000001 x13: 0000000000000001 x12: 0000000000000000
x11: 0000000000000179 x10: 0000000000000870 x9 : ffff800009bebd60
x8 : ffff0000c27d3ad0 x7 : fefefefefefefeff x6 : 0000646e756f626e
x5 : ffff0000c0f67840 x4 : 0000000000000000 x3 : ffff0000c2398000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 io_do_iopoll+0x344/0x360
 io_uring_try_cancel_requests+0x21c/0x334
 io_ring_exit_work+0x90/0x40c
 process_one_work+0x1a4/0x254
 worker_thread+0x1ec/0x258
 kthread+0xb8/0xc8
 ret_from_fork+0x10/0x20

Add a cond_resched() in the cancelation IOPOLL loop to fix this.

Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: mark task TASK_RUNNING before handling resume/task work

commit 2f2bb1ffc9983e227424d0787289da5483b0c74f upstream.

Just like for task_work, set the task mode to TASK_RUNNING before doing
potential resume work. We're not holding any locks at this point,
but we may have already set the task state to TASK_INTERRUPTIBLE in
preparation for going to sleep waiting for events. Ensure that we set it
back to TASK_RUNNING if we have work to process, to avoid warnings on
calling blocking operations with !TASK_RUNNING.

Fixes: b5d3ae202fbf ("io_uring: handle TIF_NOTIFY_RESUME when checking for task_work")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202302062208.24d3e563-oliver.sang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: handle TIF_NOTIFY_RESUME when checking for task_work

commit b5d3ae202fbfe055aa2a8ae8524531ee1dcab717 upstream.

If TIF_NOTIFY_RESUME is set, then we need to call resume_user_mode_work()
for PF_IO_WORKER threads. They never return to usermode, hence never get
a chance to process any items that are marked by this flag. Most notably
this includes the final put of files, but also any throttling markers set
by block cgroups.

Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: qat - fix out-of-bounds read

commit f6044cc3030e139f60c281386f28bda6e3049d66 upstream.

When preparing an AER-CTR request, the driver copies the key provided by
the user into a data structure that is accessible by the firmware.
If the target device is QAT GEN4, the key size is rounded up by 16 since
a rounded up size is expected by the device.
If the key size is rounded up before the copy, the size used for copying
the key might be bigger than the size of the region containing the key,
causing an out-of-bounds read.

Fix by doing the copy first and then update the keylen.

This is to fix the following warning reported by KASAN:

[  138.150574] BUG: KASAN: global-out-of-bounds in qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat]
[  138.150641] Read of size 32 at addr ffffffff88c402c0 by task cryptomgr_test/2340

[  138.150651] CPU: 15 PID: 2340 Comm: cryptomgr_test Not tainted 6.2.0-rc1+ #45
[  138.150659] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.86B.0087.D13.2208261706 08/26/2022
[  138.150663] Call Trace:
[  138.150668]  <TASK>
[  138.150922]  kasan_check_range+0x13a/0x1c0
[  138.150931]  memcpy+0x1f/0x60
[  138.150940]  qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat]
[  138.151006]  qat_alg_skcipher_init_sessions+0xc1/0x240 [intel_qat]
[  138.151073]  crypto_skcipher_setkey+0x82/0x160
[  138.151085]  ? prepare_keybuf+0xa2/0xd0
[  138.151095]  test_skcipher_vec_cfg+0x2b8/0x800

Fixes: 67916c951689 ("crypto: qat - add AES-CTR support for QAT GEN4 devices")
Cc: <stable@vger.kernel.org>
Reported-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Tested-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqdomain: Fix domain registration race

commit 8932c32c3053accd50702b36e944ac2016cd103c upstream.

Hierarchical domains created using irq_domain_create_hierarchy() are
currently added to the domain list before having been fully initialised.

This specifically means that a racing allocation request might fail to
allocate irq data for the inner domains of a hierarchy in case the
parent domain pointer has not yet been set up.

Note that this is not really any issue for irqchip drivers that are
registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE())
but could potentially cause trouble with drivers that are registered
later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(),
gpiochip drivers, etc.).

Fixes: afb7da83b9f4 ("irqdomain: Introduce helper function irq_domain_add_hierarchy()")
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ johan: add commit message ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqdomain: Drop bogus fwspec-mapping error handling

commit e3b7ab025e931accdc2c12acf9b75c6197f1c062 upstream.

In case a newly allocated IRQ ever ends up not having any associated
struct irq_data it would not even be possible to dispose the mapping.

Replace the bogus disposal with a WARN_ON().

This will also be used to fix a shared-interrupt mapping race, hence the
CC-stable tag.

Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqdomain: Look for existing mapping only once

commit 6e6f75c9c98d2d246d90411ff2b6f0cd271f4cba upstream.

Avoid looking for an existing mapping twice when creating a new mapping
using irq_create_fwspec_mapping() by factoring out the actual allocation
which is shared with irq_create_mapping_affinity().

The new helper function will also be used to fix a shared-interrupt
mapping race, hence the Fixes tag.

Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqdomain: Fix disassociation race

commit 3f883c38f5628f46b30bccf090faec054088e262 upstream.

The global irq_domain_mutex is held when mapping interrupts from
non-hierarchical domains but currently not when disposing them.

This specifically means that updates of the domain mapcount is racy
(currently only used for statistics in debugfs).

Make sure to hold the global irq_domain_mutex also when disposing
mappings from non-hierarchical domains.

Fixes: 9dc6be3d4193 ("genirq/irqdomain: Add map counter")
Cc: stable@vger.kernel.org # 4.13
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqdomain: Fix association race

commit b06730a571a9ff1ba5bd6b20bf9e50e5a12f1ec6 upstream.

The sanity check for an already mapped virq is done outside of the
irq_domain_mutex-protected section which means that an (unlikely) racing
association may not be detected.

Fix this by factoring out the association implementation, which will
also be used in a follow-on change to fix a shared-interrupt mapping
race.

Fixes: ddaf144c61da ("irqdomain: Refactor irq_domain_associate_many()")
Cc: stable@vger.kernel.org # 3.11
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Align ima_file_mmap() parameters with mmap_file LSM hook

commit 4971c268b85e1c7a734a61622fc0813c86e2362e upstream.

Commit 98de59bfe4b2f ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().

However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.

A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.

Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.

Cc: stable@vger.kernel.org
Fixes: 98de59bfe4b2 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brd: return 0/-error from brd_insert_page()

commit db0ccc44a20b4bb3039c0f6885a1f9c3323c7673 upstream.

It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.

Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/hw-vuln: Document the interaction between IBRS and STIBP

commit e02b50ca442e88122e1302d4dbc1b71a4808c13f upstream.

Explain why STIBP is needed with legacy IBRS as currently implemented
(KERNEL_IBRS) and why STIBP is not needed when enhanced IBRS is enabled.

Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227060541.1939092-2-kpsingh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Allow enabling STIBP with legacy IBRS

commit 6921ed9049bc7457f66c1596c5b78aec0dae4a9d upstream.

When plain IBRS is enabled (not enhanced IBRS), the logic in
spectre_v2_user_select_mitigation() determines that STIBP is not needed.

The IBRS bit implicitly protects against cross-thread branch target
injection. However, with legacy IBRS, the IBRS bit is cleared on
returning to userspace for performance reasons which leaves userspace
threads vulnerable to cross-thread branch target injection against which
STIBP protects.

Exclude IBRS from the spectre_v2_in_ibrs_mode() check to allow for
enabling STIBP (through seccomp/prctl() by default or always-on, if
selected by spectre_v2_user kernel cmdline parameter).

  [ bp: Massage. ]

Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Reported-by: José Oliveira <joseloliveira11@gmail.com>
Reported-by: Rodrigo Branco <rodrigo@kernelhacking.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230220120127.1975241-1-kpsingh@kernel.org
Link: https://lore.kernel.org/r/20230221184908.2349578-1-kpsingh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/AMD: Fix mixed steppings support

commit 7ff6edf4fef38ab404ee7861f257e28eaaeed35f upstream.

The AMD side of the loader has always claimed to support mixed
steppings. But somewhere along the way, it broke that by assuming that
the cached patch blob is a single one instead of it being one per
*node*.

So turn it into a per-node one so that each node can stash the blob
relevant for it.

  [ NB: Fixes tag is not really the exactly correct one but it is good
    enough. ]

Fixes: fe055896c040 ("x86/microcode: Merge the early microcode loader")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org> # 2355370cd941 ("x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter")
Cc: <stable@kernel.org> # a5ad92134bd1 ("x86/microcode/AMD: Add a @cpu parameter to the reloading functions")
Link: https://lore.kernel.org/r/20230130161709.11615-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/AMD: Add a @cpu parameter to the reloading functions

commit a5ad92134bd153a9ccdcddf09a95b088f36c3cce upstream.

Will be used in a subsequent change.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130161709.11615-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter

commit 2355370cd941cbb20882cc3f34460f9f2b8f9a18 upstream.

It is always the BSP.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130161709.11615-2-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range

commit f1c97a1b4ef709e3f066f82e3ba3108c3b133ae6 upstream.

When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.

arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.

For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:

   0xffffffff816cb5e9 <+9>:     push   %r12
   0xffffffff816cb5eb <+11>:    xor    %r12d,%r12d
   0xffffffff816cb5ee <+14>:    test   %rdi,%rdi
   0xffffffff816cb5f1 <+17>:    setne  %r12b
   0xffffffff816cb5f5 <+21>:    push   %rbp

1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
  After the optimization, "func" code changes to:

   0xffffffff816cc079 <+9>:     push   %r12
   0xffffffff816cc07b <+11>:    jmp    0xffffffffa0210000
   0xffffffff816cc080 <+16>:    incl   0xf(%rcx)
   0xffffffff816cc083 <+19>:    xchg   %eax,%ebp
   0xffffffff816cc084 <+20>:    (bad)
   0xffffffff816cc085 <+21>:    push   %rbp

Now op1->flags == KPROBE_FLAG_OPTIMATED;

2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.

register_kprobe(kp2)
  register_aggr_kprobe
    alloc_aggr_kprobe
      __prepare_optimized_kprobe
        arch_prepare_optimized_kprobe
          __recover_optprobed_insn    // copy original bytes from kp1->optinsn.copied_insn,
                                      // jump address = <func+14>

3. disable kp1:

disable_kprobe(kp1)
  __disable_kprobe
    ...
    if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
      ret = disarm_kprobe(orig_p, true)       // add op1 in unoptimizing_list, not unoptimized
      orig_p->flags |= KPROBE_FLAG_DISABLED;  // op1->flags ==  KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
    ...

4. unregister kp2
__unregister_kprobe_top
  ...
  if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
    optimize_kprobe(op)
      ...
      if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
        return;
      p->kp.flags |= KPROBE_FLAG_OPTIMIZED;   //  now op2 has KPROBE_FLAG_OPTIMIZED
  }

"func" code now is:

   0xffffffff816cc079 <+9>:     int3
   0xffffffff816cc07a <+10>:    push   %rsp
   0xffffffff816cc07b <+11>:    jmp    0xffffffffa0210000
   0xffffffff816cc080 <+16>:    incl   0xf(%rcx)
   0xffffffff816cc083 <+19>:    xchg   %eax,%ebp
   0xffffffff816cc084 <+20>:    (bad)
   0xffffffff816cc085 <+21>:    push   %rbp

5. if call "func", int3 handler call setup_detour_execution:

  if (p->flags & KPROBE_FLAG_OPTIMIZED) {
    ...
    regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
    ...
  }

The code for the destination address is

   0xffffffffa021072c:  push   %r12
   0xffffffffa021072e:  xor    %r12d,%r12d
   0xffffffffa0210731:  jmp    0xffffffff816cb5ee <func+14>

However, <func+14> is not a valid start instruction address. As a result, an error occurs.

Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Fix __recover_optprobed_insn check optimizing logic

commit 868a6fc0ca2407622d2833adefe1c4d284766c4c upstream.

Since the following commit:

  commit f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")

modified the update timing of the KPROBE_FLAG_OPTIMIZED, a optimized_kprobe
may be in the optimizing or unoptimizing state when op.kp->flags
has KPROBE_FLAG_OPTIMIZED and op->list is not empty.

The __recover_optprobed_insn check logic is incorrect, a kprobe in the
unoptimizing state may be incorrectly determined as unoptimizing.
As a result, incorrect instructions are copied.

The optprobe_queued_unopt function needs to be exported for invoking in
arch directory.

Link: https://lore.kernel.org/all/20230216034247.32348-2-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot: Disable SVM, not just VMX, when stopping CPUs

commit a2b07fa7b93321c059af0c6d492cc9a4f1e390aa upstream.

Disable SVM and more importantly force GIF=1 when halting a CPU or
rebooting the machine.  Similar to VMX, SVM allows software to block
INITs via CLGI, and thus can be problematic for a crash/reboot.  The
window for failure is smaller with SVM as INIT is only blocked while
GIF=0, i.e. between CLGI and STGI, but the window does exist.

Fixes: fba4f472b33a ("x86/reboot: Turn off KVM when halting a CPU")
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot: Disable virtualization in an emergency if SVM is supported

commit d81f952aa657b76cea381384bef1fea35c5fd266 upstream.

Disable SVM on all CPUs via NMI shootdown during an emergency reboot.
Like VMX, SVM can block INIT, e.g. if the emergency reboot is triggered
between CLGI and STGI, and thus can prevent bringing up other CPUs via
INIT-SIPI-SIPI.

Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/crash: Disable virt in core NMI crash handler to avoid double shootdown

commit 26044aff37a5455b19a91785086914fd33053ef4 upstream.

Disable virtualization in crash_nmi_callback() and rework the
emergency_vmx_disable_all() path to do an NMI shootdown if and only if a
shootdown has not already occurred.   NMI crash shootdown fundamentally
can't support multiple invocations as responding CPUs are deliberately
put into halt state without unblocking NMIs.  But, the emergency reboot
path doesn't have any work of its own, it simply cares about disabling
virtualization, i.e. so long as a shootdown occurred, emergency reboot
doesn't care who initiated the shootdown, or when.

If "crash_kexec_post_notifiers" is specified on the kernel command line,
panic() will invoke crash_smp_send_stop() and result in a second call to
nmi_shootdown_cpus() during native_machine_emergency_restart().

Invoke the callback _before_ disabling virtualization, as the current
VMCS needs to be cleared before doing VMXOFF.  Note, this results in a
subtle change in ordering between disabling virtualization and stopping
Intel PT on the responding CPUs.  While VMX and Intel PT do interact,
VMXOFF and writes to MSR_IA32_RTIT_CTL do not induce faults between one
another, which is all that matters when panicking.

Harden nmi_shootdown_cpus() against multiple invocations to try and
capture any such kernel bugs via a WARN instead of hanging the system
during a crash/dump, e.g. prior to the recent hardening of
register_nmi_handler(), re-registering the NMI handler would trigger a
double list_add() and hang the system if CONFIG_BUG_ON_DATA_CORRUPTION=y.

 list_add double add: new=ffffffff82220800, prev=ffffffff8221cfe8, next=ffffffff82220800.
 WARNING: CPU: 2 PID: 1319 at lib/list_debug.c:29 __list_add_valid+0x67/0x70
 Call Trace:
  __register_nmi_handler+0xcf/0x130
  nmi_shootdown_cpus+0x39/0x90
  native_machine_emergency_restart+0x1c9/0x1d0
  panic+0x237/0x29b

Extract the disabling logic to a common helper to deduplicate code, and
to prepare for doing the shootdown in the emergency reboot path if SVM
is supported.

Note, prior to commit ed72736183c4 ("x86/reboot: Force all cpus to exit
VMX root if VMX is supported"), nmi_shootdown_cpus() was subtly protected
against a second invocation by a cpu_vmx_enabled() check as the kdump
handler would disable VMX if it ran first.

Fixes: ed72736183c4 ("x86/reboot: Force all cpus to exit VMX root if VMX is supported")
Cc: stable@vger.kernel.org
Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/all/20220427224924.592546-2-gpiccoli@igalia.com
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows)

commit 6a3236580b0b1accc3976345e723104f74f6f8e6 upstream.

Set GIF=1 prior to disabling SVM to ensure that INIT is recognized if the
kernel is disabling SVM in an emergency, e.g. if the kernel is about to
jump into a crash kernel or may reboot without doing a full CPU RESET.
If GIF is left cleared, the new kernel (or firmware) will be unabled to
awaken APs.  Eat faults on STGI (due to EFER.SVME=0) as it's possible
that SVM could be disabled via NMI shootdown between reading EFER.SVME
and executing STGI.

Link: https://lore.kernel.org/all/cbcb6f35-e5d7-c1c9-4db9-fe5cc4de579a@amd.com
Cc: stable@vger.kernel.org
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: disable migration mode when dirty tracking is disabled

commit f2d3155e2a6bac44d16f04415a321e8707d895c6 upstream.

Migration mode is a VM attribute which enables tracking of changes in
storage attributes (PGSTE). It assumes dirty tracking is enabled on all
memslots to keep a dirty bitmap of pages with changed storage attributes.

When enabling migration mode, we currently check that dirty tracking is
enabled for all memslots. However, userspace can disable dirty tracking
without disabling migration mode.

Since migration mode is pointless with dirty tracking disabled, disable
migration mode whenever userspace disables dirty tracking on any slot.

Also update the documentation to clarify that dirty tracking must be
enabled when enabling migration mode, which is already enforced by the
code in kvm_s390_vm_start_migration().

Also highlight in the documentation for KVM_S390_GET_CMMA_BITS that it
can now fail with -EINVAL when dirty tracking is disabled while
migration mode is on. Move all the error codes to a table so this stays
readable.

To disable migration mode, slots_lock should be held, which is taken
in kvm_set_memory_region() and thus held in
kvm_arch_prepare_memory_region().

Restructure the prepare code a bit so all the sanity checking is done
before disabling migration mode. This ensures migration mode isn't
disabled when some sanity check fails.

Cc: stable@vger.kernel.org
Fixes: 190df4a212a7 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230127140532.230651-2-nrb@linux.ibm.com
Message-Id: <20230127140532.230651-2-nrb@linux.ibm.com>
[frankja@linux.ibm.com: fixed commit message typo, moved api.rst error table upwards]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: hyper-v: placate modpost section mismatch error

commit 45dd9bc75d9adc9483f0c7d662ba6e73ed698a0b upstream.

modpost reports section mismatch errors/warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)

This "(unknown) (section: .init.data)" all refer to svm_x86_ops.

Tag svm_hv_hardware_setup() with __init to fix a modpost warning as the
non-stub implementation accesses __initdata (svm_x86_ops), i.e. would
generate a use-after-free if svm_hv_hardware_setup() were actually invoked
post-init.  The helper is only called from svm_hardware_setup(), which is
also __init, i.e. lack of __init is benign other than the modpost warning.

Fixes: 1e0c7d40758b ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230222073315.9081-1-rdunlap@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Fix potential overflow in SEV's send|receive_update_data()

commit f94f053aa3a5d6ff17951870483d9eb9e13de2e2 upstream.

KVM_SEV_SEND_UPDATE_DATA and KVM_SEV_RECEIVE_UPDATE_DATA have an integer
overflow issue. Params.guest_len and offset are both 32 bits wide, with a
large params.guest_len the check to confirm a page boundary is not
crossed can falsely pass:

    /* Check if we are crossing the page boundary *
    offset = params.guest_uaddr & (PAGE_SIZE - 1);
    if ((params.guest_len + offset > PAGE_SIZE))

Add an additional check to confirm that params.guest_len itself is not
greater than PAGE_SIZE.

Note, this isn't a security concern as overflow can happen if and only if
params.guest_len is greater than 0xfffff000, and the FW spec says these
commands fail with lengths greater than 16KB, i.e. the PSP will detect
KVM's goof.

Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Fixes: d3d1af85e2c7 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: Thomas Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230207171354.4012821-1-pgonda@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI

commit ba5838abb05334e4abfdff1490585c7f365e0424 upstream.

Inject a #GP if the guest attempts to set reserved bits in the x2APIC-only
Self-IPI register.  Bits 7:0 hold the vector, all other bits are reserved.

Reported-by: Marc Orr <marcorr@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Destroy target device if coalesced MMIO unregistration fails

commit b1cb1fac22abf102ffeb29dd3eeca208a3869d54 upstream.

Destroy and free the target coalesced MMIO device if unregistering said
device fails.  As clearly noted in the code, kvm_io_bus_unregister_dev()
does not destroy the target device.

  BUG: memory leak
  unreferenced object 0xffff888112a54880 (size 64):
    comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s)
    hex dump (first 32 bytes):
      38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff  8.g.....8.g.....
      e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff  .........0g.....
    backtrace:
      [<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline]
      [<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline]
      [<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150
      [<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323
      [<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline]
      [<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline]
      [<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696
      [<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713
      [<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline]
      [<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline]
      [<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
      [<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290
      [<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

  BUG: leak checking failed

Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed")
Cc: stable@vger.kernel.org
Reported-by: 柳菁峰 <liujingfeng@qianxin.com>
Reported-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20221219171924.67989-1-seanjc@google.com
Link: https://lore.kernel.org/all/20230118220003.1239032-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/siw: Fix user page pinning accounting

[ Upstream commit 65a8fc30fb6722fc25adec6d7dd5b53b0bb85820 ]

To avoid racing with other user memory reservations, immediately
account full amount of pages to be pinned.

Fixes: 2251334dcac9 ("rdma/siw: application buffer management")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20230202101000.402990-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix file corruption when appending just after end of preallocated extent

commit 36ec52ea038b18a53e198116ef7d7e70c87db046 upstream.

When we append new block just after the end of preallocated extent, the
code in inode_getblk() wrongly determined we're going to use the
preallocated extent which resulted in adding block into a wrong logical
offset in the file. Sequence like this manifests it:

xfs_io -f -c "pwrite 0x2cacf 0xd122" -c "truncate 0x2dd6f" \
  -c "pwrite 0x27fd9 0x69a9" -c "pwrite 0x32981 0x7244" <file>

The code that determined the use of preallocated extent is actually
stale because udf_do_extend_file() does not create preallocation anymore
so after calling that function we are sure there's no usable
preallocation. Just remove the faulty condition.

CC: stable@vger.kernel.org
Fixes: 16d055656814 ("udf: Discard preallocation before extending file with a hole")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Detect system inodes linked into directory hierarchy

commit 85a37983ec69cc9fcd188bc37c4de15ee326355a upstream.

When UDF filesystem is corrupted, hidden system inodes can be linked
into directory hierarchy which is an avenue for further serious
corruption of the filesystem and kernel confusion as noticed by syzbot
fuzzed images. Refuse to access system inodes linked into directory
hierarchy and vice versa.

CC: stable@vger.kernel.org
Reported-by: syzbot+38695a20b8addcbc1084@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Preserve link count of system files

commit fc8033a34a3ca7d23353e645e6dde5d364ac5f12 upstream.

System files in UDF filesystem have link count 0. To not confuse VFS we
fudge the link count to be 1 when reading such inodes however we forget
to restore the link count of 0 when writing such inodes. Fix that.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Do not update file length for failed writes to inline files

commit 256fe4162f8b5a1625b8603ca5f7ff79725bfb47 upstream.

When write to inline file fails (or happens only partly), we still
updated length of inline data as if the whole write succeeded. Fix the
update of length of inline data to happen only if the write succeeds.

Reported-by: syzbot+0937935b993956ba28ab@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Do not bother merging very long extents

commit 53cafe1d6d8ef9f93318e5bfccc0d24f27d41ced upstream.

When merging very long extents we try to push as much length as possible
to the first extent. However this is unnecessarily complicated and not
really worth the trouble. Furthermore there was a bug in the logic
resulting in corrupting extents in the file as syzbot reproducer shows.
So just don't bother with the merging of extents that are too long
together.

CC: stable@vger.kernel.org
Reported-by: syzbot+60f291a24acecb3c2bd5@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Truncate added extents on failed expansion

commit 70bfb3a8d661d4fdc742afc061b88a7f3fc9f500 upstream.

When a file expansion failed because we didn't have enough space for
indirect extents make sure we truncate extents created so far so that we
don't leave extents beyond EOF.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Test ptrace as much as possible with Yama

commit 8677e555f17f51321d0730b945aeb7d4b95f998f upstream.

Update ptrace tests according to all potential Yama security policies.
This is required to make such tests pass even if Yama is enabled.

Tests are not skipped but they now check both Landlock and Yama boundary
restrictions at run time to keep a maximum test coverage (i.e. positive
and negative testing).

Signed-off-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230114020306.1407195-2-jeffxu@google.com
Cc: stable@vger.kernel.org
[mic: Add curly braces around EXPECT_EQ() to make it build, and improve
commit message]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Skip overlayfs tests when not supported

commit 366617a69e60610912836570546f118006ebc7cb upstream.

overlayfs may be disabled in the kernel configuration, causing related
tests to fail.  Check that overlayfs is supported at runtime, so we can
skip layout2_overlay.* accordingly.

Signed-off-by: Jeff Xu <jeffxu@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230113053229.1281774-2-jeffxu@google.com
[mic: Reword comments and constify variables]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix non-auto defrag path not working issue

commit 236b9254f8d1edc273ad88b420aa85fbd84f492d upstream.

This fixes three issues on move extents ioctl without auto defrag:

a) In ocfs2_find_victim_alloc_group(), we have to convert bits to block
   first in case of global bitmap.

b) In ocfs2_probe_alloc_group(), when finding enough bits in block
   group bitmap, we have to back off move_len to start pos as well,
   otherwise it may corrupt filesystem.

c) In ocfs2_ioctl_move_extents(), set me_threshold both for non-auto
   and auto defrag paths.  Otherwise it will set move_max_hop to 0 and
   finally cause unexpectedly ENOSPC error.

Currently there are no tools triggering the above issues since
defragfs.ocfs2 enables auto defrag by default.  Tested with manually
changing defragfs.ocfs2 to run non auto defrag path.

Link: https://lkml.kernel.org/r/20230220050526.22020-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix defrag path triggering jbd2 ASSERT

commit 60eed1e3d45045623e46944ebc7c42c30a4350f0 upstream.

code path:

ocfs2_ioctl_move_extents
 ocfs2_move_extents
  ocfs2_defrag_extent
   __ocfs2_move_extent
    + ocfs2_journal_access_di
    + ocfs2_split_extent  //sub-paths call jbd2_journal_restart
    + ocfs2_journal_dirty //crash by jbs2 ASSERT

crash stacks:

PID: 11297  TASK: ffff974a676dcd00  CPU: 67  COMMAND: "defragfs.ocfs2"
 #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
 #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
 #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
 #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
    [exception RIP: jbd2_journal_dirty_metadata+0x2ba]
    RIP: ffffffffc09ca54a  RSP: ffffb25d8dad3b70  RFLAGS: 00010207
    RAX: 0000000000000000  RBX: ffff9706eedc5248  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: ffff97337029ea28  RDI: ffff9706eedc5250
    RBP: ffff9703c3520200   R8: 000000000f46b0b2   R9: 0000000000000000
    R10: 0000000000000001  R11: 00000001000000fe  R12: ffff97337029ea28
    R13: 0000000000000000  R14: ffff9703de59bf60  R15: ffff9706eedc5250
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
 #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
 #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]

Analysis

This bug has the same root cause of 'commit 7f27ec978b0e ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'.  For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.

How to fix

For ocfs2_split_extent() can handle journal operations totally by itself.
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair.  The fix method is to remove
journal access/dirty from __ocfs2_move_extent().

The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html

Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix cgroup writeback accounting with fs-layer encryption

commit 844545c51a5b2a524b22a2fe9d0b353b827d24b4 upstream.

When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), f2fs encrypts the
pagecache page into a bounce page, then writes the bounce page.

It also passes the bounce page to wbc_account_cgroup_owner().  That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.

Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().

Fixes: 578c647879f7 ("f2fs: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix information leak in f2fs_move_inline_dirents()

commit 9a5571cff4ffcfc24847df9fd545cc5799ac0ee5 upstream.

When converting an inline directory to a regular one, f2fs is leaking
uninitialized memory to disk because it doesn't initialize the entire
directory block.  Fix this by zero-initializing the block.

This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded
initializing when converting inline dentry"), which didn't consider the
security implications of leaking uninitialized memory to disk.

This was found by running xfstest generic/435 on a KMSAN-enabled kernel.

Fixes: 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry")
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: send FIN ack back in right cases

commit 00908b3388255fc1d3782b744d07f327712f401f upstream.

This patch moves to send a ack back for receiving a FIN message only
when we are in valid states. In other cases and there might be a sender
waiting for a ack we just let it timeout at the senders time and
hopefully all other cleanups will remove the FIN message on their
sending queue. As an example we should never send out an ACK being in
LAST_ACK state or we cannot assume a working socket communication when
we are in CLOSED state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: move sending fin message into state change handling

commit a58496361802070996f9bd76e941d109c4a85ebd upstream.

This patch moves the send fin handling, which should appear in a specific
state change, into the state change handling while the per node
state_lock is held. I experienced issues with other messages because
we changed the state and a fin message was sent out in a different state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: don't set stop rx flag after node reset

commit 15c63db8e86a72e0d5cfb9bf0cd1870e39a3e5fe upstream.

Similar to the stop tx flag, the rx flag should warn about a dlm message
being received at DLM_FIN state change, when we are assuming no other
dlm application messages. If we receive a FIN message and we are in the
state DLM_FIN_WAIT2 we call midcomms_node_reset() which puts the
midcomms node into DLM_CLOSED state. Afterwards we should not set the
DLM_NODE_FLAG_STOP_RX flag any more.  This patch changes the setting
DLM_NODE_FLAG_STOP_RX in those state changes when we receive a FIN
message and we assume there will be no other dlm application messages
received until we hit DLM_CLOSED state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix inode->i_blocks for non-512 byte sector size device

commit 39c1ce8eafc0ff64fb9e28536ccc7df6a8e2999d upstream.

inode->i_blocks is not real number of blocks, but 512 byte ones.

Fixes: 98d917047e8b ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: redefine DIR_DELETED as the bad cluster number

commit bdaadfd343e3cba49ad0b009ff4b148dad0fa404 upstream.

When a file or a directory is deleted, the hint for the cluster of
its parent directory in its in-memory inode is set as DIR_DELETED.
Therefore, DIR_DELETED must be one of invalid cluster numbers. According
to the exFAT specification, a volume can have at most 2^32-11 clusters.
However, DIR_DELETED is wrongly defined as 0xFFFF0321, which could be
a valid cluster number. To fix it, let's redefine DIR_DELETED as
0xFFFFFFF7, the bad cluster number.

Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix unexpected EOF while reading dir

commit 6cb5d1a16a51d080fbc1649a5144cbc5ca7d6f88 upstream.

If the position is not aligned with the dentry size, the return
value of readdir() will be NULL and errno is 0, which means the
end of the directory stream is reached.

If the position is aligned with dentry size, but there is no file
or directory at the position, exfat_readdir() will continue to
get dentry from the next dentry. So the dentry gotten by readdir()
may not be at the position.

After this commit, if the position is not aligned with the dentry
size, round the position up to the dentry size and continue to get
the dentry.

Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix reporting fs error when reading dir beyond EOF

commit 706fdcac002316893434d753be8cfb549fe1d40d upstream.

Since seekdir() does not check whether the position is valid, the
position may exceed the size of the directory. We found that for
a directory with discontinuous clusters, if the position exceeds
the size of the directory and the excess size is greater than or
equal to the cluster size, exfat_readdir() will return -EIO,
causing a file system error and making the file system unavailable.

Reproduce this bug by:

seekdir(dir, dir_size + cluster_size);
dirent = readdir(dir);

The following log will be printed if mount with 'errors=remount-ro'.

[11166.712896] exFAT-fs (sdb1): error, invalid access to FAT (entry 0xffffffff)
[11166.712905] exFAT-fs (sdb1): Filesystem has been set read-only

Fixes: 1e5654de0f51 ("exfat: handle wrong stream entry size in exfat_readdir()")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: hfsplus: fix UAF issue in hfsplus_put_super

commit 07db5e247ab5858439b14dd7cc1fe538b9efcf32 upstream.

The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.

As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.

To fix this error, we move all iput calls before hfsplus_btree_close.

Note that this patch is tested on Syzbot.

Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hfs: fix missing hfs_bnode_get() in __hfs_bnode_create

commit a9dc087fd3c484fd1ed18c5efb290efaaf44ce03 upstream.

Syzbot found a kernel BUG in hfs_bnode_put():

 kernel BUG at fs/hfs/bnode.c:466!
 invalid opcode: 0000 [#1] PREEMPT SMP KASAN
 CPU: 0 PID: 3634 Comm: kworker/u4:5 Not tainted 6.1.0-rc7-syzkaller-00190-g97ee9d1c1696 #0
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
 Workqueue: writeback wb_workfn (flush-7:0)
 RIP: 0010:hfs_bnode_put+0x46f/0x480 fs/hfs/bnode.c:466
 Code: 8a 80 ff e9 73 fe ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a0 fe ff ff 48 89 df e8 db 8a 80 ff e9 93 fe ff ff e8 a1 68 2c ff <0f> 0b e8 9a 68 2c ff 0f 0b 0f 1f 84 00 00 00 00 00 55 41 57 41 56
 RSP: 0018:ffffc90003b4f258 EFLAGS: 00010293
 RAX: ffffffff825e318f RBX: 0000000000000000 RCX: ffff8880739dd7c0
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffc90003b4f430 R08: ffffffff825e2d9b R09: ffffed10045157d1
 R10: ffffed10045157d1 R11: 1ffff110045157d0 R12: ffff8880228abe80
 R13: ffff88807016c000 R14: dffffc0000000000 R15: ffff8880228abe00
 FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fa6ebe88718 CR3: 000000001e93d000 CR4: 00000000003506f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  hfs_write_inode+0x1bc/0xb40
  write_inode fs/fs-writeback.c:1440 [inline]
  __writeback_single_inode+0x4d6/0x670 fs/fs-writeback.c:1652
  writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1878
  __writeback_inodes_wb+0x125/0x420 fs/fs-writeback.c:1949
  wb_writeback+0x440/0x7b0 fs/fs-writeback.c:2054
  wb_check_start_all fs/fs-writeback.c:2176 [inline]
  wb_do_writeback fs/fs-writeback.c:2202 [inline]
  wb_workfn+0x827/0xef0 fs/fs-writeback.c:2235
  process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
  worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
  kthread+0x266/0x300 kernel/kthread.c:376
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
  </TASK>

The BUG_ON() is triggered at here:

/* Dispose of resources used by a node */
void hfs_bnode_put(struct hfs_bnode *node)
{
if (node) {
  <skipped>
  BUG_ON(!atomic_read(&node->refcnt)); <- we have issue here!!!!
  <skipped>
  }
}

By tracing the refcnt, I found the node is created by hfs_bmap_alloc()
with refcnt 1.  Then the node is used by hfs_btree_write().  There is a
missing of hfs_bnode_get() after find the node.  The issue happened in
following path:

<alloc>
 hfs_bmap_alloc
   hfs_bnode_find
     __hfs_bnode_create   <- allocate a new node with refcnt 1.
   hfs_bnode_put          <- decrease the refcnt

<write>
 hfs_btree_write
   hfs_bnode_find
     __hfs_bnode_create
       hfs_bnode_findhash <- find the node without refcnt increased.
   hfs_bnode_put   <- trigger the BUG_ON() since refcnt is 0.

Link: https://lkml.kernel.org/r/20221212021627.3766829-1-liushixin2@huawei.com
Reported-by: syzbot+5b04b49a7ec7226c7426@syzkaller.appspotmail.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct HDMI phy compatible in Exynos4

commit af1c89ddb74f170eccd5a57001d7317560b638ea upstream.

The HDMI phy compatible was missing vendor prefix.

Fixes: ed80d4cab772 ("ARM: dts: add hdmi related nodes for exynos4 SoCs")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230125094513.155063-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length

commit fb533473d1595fe79ecb528fda1de33552b07178 upstream.

ksmbd allowed the actual frame length to be smaller than the rfc1002
length. If allowed, it is possible to allocates a large amount of memory
that can be limited by credit management and can eventually cause memory
exhaustion problem. This patch do not allow it except SMB2 Negotiate
request which will be validated when message handling proceeds.
Also, Allow a message that padded to 8byte boundary.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix wrong data area length for smb2 lock request

commit 8f8c43b125882ac14372f8dca0c8e50a59e78d79 upstream.

When turning debug mode on, The following error message from
ksmbd_smb2_check_message() is coming.

ksmbd: cli req padded more than expected. Length 112 not 88 for cmd:10 mid:14

data area length calculation for smb2 lock request in smb2_get_data_area_len() is
incorrect.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>