Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Mon 14 May 2018 08:51:53 BST
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  net: Get rid of 'vlan' terminology and use 'hub' instead in the doc files
  net: Get rid of 'vlan' terminology and use 'hub' instead in the source files
  net: Remove the deprecated "vlan" parameter
  net: Fix memory leak in net_param_nic()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

tracing patches

Just a MAINTAINERS file update for tracing files.

# gpg: Signature made Fri 11 May 2018 19:28:34 BST
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  MAINTAINERS: Add trace-events and qemu-option-trace.texi to tracing section

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Don't silently truncate extremely long words in the command line
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs

# gpg: Signature made Fri 11 May 2018 13:33:46 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (29 commits)
  rename included C files to foo.inc.c, remove osdep.h
  pc-dimm: fix error messages if no slots were defined
  build: Silence dtc directory creation
  shippable: Remove Debian 8 libfdt kludge
  configure: Display if libfdt is from system or git
  configure: Really use local libfdt if the system one is too old
  i386/kvm: add support for Hyper-V reenlightenment MSRs
  qemu-doc: provide details of supported build platforms
  qemu-options: Remove deprecated -no-kvm-irqchip
  qemu-options: Remove deprecated -no-kvm-pit-reinjection
  qemu-options: Bail out on unsupported options instead of silently ignoring them
  qemu-options: Remove remainders of the -tdf option
  qemu-options: Mark -virtioconsole as deprecated
  target/i386: sev: fix memory leaks
  opts: don't silently truncate long option values
  opts: don't silently truncate long parameter keys
  accel: use g_strsplit for parsing accelerator names
  update-linux-headers: drop hyperv.h
  qemu-thread: always keep the posix wrapper layer
  exec: reintroduce MemoryRegion caching
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

net: Get rid of 'vlan' terminology and use 'hub' instead in the doc files

'vlan' is very confusing since it does not mean something like IEEE
802.1Q, but rather emulated hubs, so let's switch to that terminology
instead. While we're at it, move the subsection about hub a little bit
downward in the documentation (it's not as important anymore as it was
before the invention of the -netdev parameter), and extend it a little
bit.

Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: Get rid of 'vlan' terminology and use 'hub' instead in the source files

'vlan' is very confusing since it does not mean something like IEEE
802.1Q, but rather emulated hubs, so let's switch to that terminology
instead.

Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: Remove the deprecated "vlan" parameter

It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.

Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net: Fix memory leak in net_param_nic()

The early exits in case of errors leak the memory allocated for nd_id.
Fix it by using a "goto out" to the cleanup at the end of the function
instead.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180510' into staging

target-arm queue:
 * hw/arm/iotkit.c: fix minor memory leak
 * softfloat: fix wrong-exception-flags bug for multiply-add corner case
 * arm: isolate and clean up DTB generation
 * implement Arm v8.1-Atomics extension
 * Fix some bugs and missing instructions in the v8.2-FP16 extension

# gpg: Signature made Thu 10 May 2018 18:44:34 BST
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits)
  target/arm: Clear SVE high bits for FMOV
  target/arm: Fix float16 to/from int16
  target/arm: Implement vector shifted FCVT for fp16
  target/arm: Implement vector shifted SCVF/UCVF for fp16
  target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only
  target/arm: Implement CAS and CASP
  target/arm: Fill in disas_ldst_atomic
  target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode
  target/riscv: Use new atomic min/max expanders
  tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add
  tcg: Introduce atomic helpers for integer min/max
  target/xtensa: Use new min/max expanders
  target/arm: Use new min/max expanders
  tcg: Introduce helpers for integer min/max
  atomic.h: Work around gcc spurious "unused value" warning
  make sure that we aren't overwriting mc->get_hotplug_handler by accident
  arm/boot: split load_dtb() from arm_load_kernel()
  platform-bus-device: use device plug callback instead of machine_done notifier
  pc: simplify MachineClass::get_hotplug_handler handling
  softfloat: Handle default NaN mode after pickNaNMulAdd, not before
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# target/riscv/translate.c

Merge remote-tracking branch 'remotes/rth/tags/cota-target-pull-request' into staging

* Fix all next_page checks for overflow.
* Convert six targets to the translator loop.

# gpg: Signature made Wed 09 May 2018 18:20:43 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/cota-target-pull-request: (28 commits)
  target/riscv: convert to TranslatorOps
  target/riscv: convert to DisasContextBase
  target/riscv: convert to DisasJumpType
  target/openrisc: convert to TranslatorOps
  target/openrisc: convert to DisasContextBase
  target/s390x: convert to TranslatorOps
  target/s390x: convert to DisasContextBase
  target/s390x: convert to DisasJumpType
  target/mips: convert to TranslatorOps
  target/mips: use *ctx for DisasContext
  target/mips: convert to DisasContextBase
  target/mips: convert to DisasJumpType
  target/mips: use lookup_and_goto_ptr on BS_STOP
  target/sparc: convert to TranslatorOps
  target/sparc: convert to DisasContextBase
  target/sparc: convert to DisasJumpType
  target/sh4: convert to TranslatorOps
  translator: merge max_insns into DisasContextBase
  target/mips: avoid integer overflow in next_page PC check
  target/s390x: avoid integer overflow in next_page PC check
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into staging

Queued TCG patches

# gpg: Signature made Wed 09 May 2018 16:46:21 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/tcg-next-pull-request:
  tcg: Limit the number of ops in a TB
  tcg/i386: Fix dup_vec in non-AVX2 codepath

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

rename included C files to foo.inc.c, remove osdep.h

osdep.h is only needed for files that are compiled directly.
Remove it from included C source files, and rename them to
*.inc.c so that scripts/clean-includes knows to skip them.

Cc: Eric Blake <eblake@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

pc-dimm: fix error messages if no slots were defined

If no slots were defined we try to allocate an empty bitmap, which
fails.

Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20180427120515.24067-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

build: Silence dtc directory creation

Align with other mkdir calls.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <0dd4c8f5-d60e-e564-652f-cd0101f6ee68@web.de>
Message-Id: <20180415230522.24404-5-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

shippable: Remove Debian 8 libfdt kludge

This kludge was added in a825ca06137, but a cleaner and more generic
fix is now available (see ##COMMIT_CONFIGURE_LIBFDT_LDFLAGS_SHA##).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180415230522.24404-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: Display if libfdt is from system or git

The configure script outputs "yes" regardless which libfdt is used:

  ./configure
  [...]
  fdt support       yes

Sometimes you can have both system and local git version available,
change the configure script to display which library got selected:

  debian8$ dpkg-query --showformat='${Version}\n' --show libfdt-dev
  1.4.0+dfsg-1

  debian8$ ./configure
  [...]
  fdt support       git

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180415230522.24404-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: Really use local libfdt if the system one is too old

QEMU requires libfdt version >= 1.4.2.
If the host has an older libfdt installed, the configure script will use
a (git cloned) local version.

Example with Debian 8:
    $ dpkg-query --showformat='${Version}\n' --show libfdt-dev
    1.4.0+dfsg-1
    $ ./configure
    [...]
    fdt support       yes          # from git submodule 'dtc'

If this case occurs, the linker will have 2 different libfdt available in
the library search path. The default behavior is to search the system path
first, then the local path.

Even if the configure script noticed the libfdt is too old and clone a more
recent locally, when linking the system library is selected first, and the
link process eventually fails:

      LINK    mips64el-softmmu/qemu-system-mips64el
    ../hw/core/loader-fit.o: In function `load_fit':
    /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode'
    /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode'
    /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode'
    collect2: error: ld returned 1 exit status
    Makefile:201: recipe for target 'qemu-system-mips64el' failed
    make[1]: *** [qemu-system-mips64el] Error 1

QEMU already uses a kludge to enforce local CFLAGS before system ones for
libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using
the local libfdt.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180415230522.24404-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>

i386/kvm: add support for Hyper-V reenlightenment MSRs

KVM recently gained support for Hyper-V Reenlightenment MSRs which are
required to make KVM-on-Hyper-V enable TSC page clocksource to its guests
when INVTSC is not passed to it (and it is not passed by default in Qemu
as it effectively blocks migration).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20180411115036.31832-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/m68k: Fix build Werror with gcc 8.0.1

Fedora 28 ships with the released gcc 8.

The Werror stems from the compiler finding a path through the second
switch via a missing default case in which src1 is uninitialized, and
not being able to prove that the missing default case is unreachable
due to the first switch.

Simplify the second switch to merge default with OS_LONG,
which returns directly.  This removes the unreachable path.

Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20180508185520.23757-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Clear SVE high bits for FMOV

Use write_fp_dreg and clear_vec_high to zero the bits
that need zeroing for these cases.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix float16 to/from int16

The instruction "ucvtf v0.4h, v04h, #2", with input 0x8000u,
overflows the intermediate float16 to infinity before we have a
chance to scale the output.  Use float64 as the intermediate type
so that no input argument (uint32_t in this case) can overflow
or round before scaling.  Given the declared argument, the signed
int32_t function has the same problem.

When converting from float16 to integer, using u/int32_t instead
of u/int16_t means that the bounding is incorrect.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement vector shifted FCVT for fp16

While we have some of the scalar paths for FCVT for fp16,
we failed to decode the fp16 version of these instructions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement vector shifted SCVF/UCVF for fp16

While we have some of the scalar paths for *CVF for fp16,
we failed to decode the fp16 version of these instructions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement CAS and CASP

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fill in disas_ldst_atomic

This implements all of the v8.1-Atomics instructions except
for compare-and-swap, which is decoded elsewhere.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode

The insns in the ARMv8.1-Atomics are added to the existing
load/store exclusive and load/store reg opcode spaces.
Rearrange the top-level decoders for these to accomodate.
The Atomics insns themselves still generate Unallocated.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-8-richard.henderson@linaro.org
[PMM: Drop the ARM_FEATURE_V8_1 feature flag]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/riscv: Use new atomic min/max expanders

Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tcg: Introduce atomic helpers for integer min/max

Given that this atomic operation will be used by both risc-v
and aarch64, let's not duplicate code across the two targets.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/xtensa: Use new min/max expanders

The generic expanders replace nearly identical code in the translator.

Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use new min/max expanders

The generic expanders replace nearly identical code in the translator.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tcg: Introduce helpers for integer min/max

These operations are re-invented by several targets so far.
Several supported hosts have insns for these, so place the
expanders out-of-line for a future introduction of tcg opcodes.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

atomic.h: Work around gcc spurious "unused value" warning

Some versions of gcc produce a spurious warning if the result of
__atomic_compare_echange_n() is not used and the type involved
is a signed 8 bit value:
  error: value computed is not used [-Werror=unused-value]
This has been seen on at least
 gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609

Work around this by using an explicit cast to void to indicate
that we don't care about the return value.

We don't currently use our atomic_cmpxchg() macro on any signed
8 bit types, but the upcoming support for the Arm v8.1-Atomics
will require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

make sure that we aren't overwriting mc->get_hotplug_handler by accident

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1525691524-32265-5-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm/boot: split load_dtb() from arm_load_kernel()

load_dtb() depends on arm_load_kernel() to figure out place
in RAM where it should be loaded, but it's not required for
arm_load_kernel() to work. Sometimes it's neccesary for
devices added with -device/device_add to be enumerated in
DTB as well, which's lead to [1] and surrounding commits to
add 2 more machine_done notifiers with non obvious ordering
to make dynamic sysbus devices initialization happen in
the right order.

However instead of moving whole arm_load_kernel() in to
machine_done, it's sufficient to move only load_dtb() into
virt_machine_done() notifier and remove ArmLoadKernelNotifier/
/PlatformBusFDTNotifierParams notifiers, which saves us ~90LOC
and simplifies code flow quite a bit.
Later would allow to consolidate DTB generation within one
function for 'mach-virt' board and make it reentrant so it
could generate updated DTB in device hotplug secenarios.

While at it rename load_dtb() to arm_load_dtb() since it's
public now.

Add additional field skip_dtb_autoload to struct arm_boot_info
to allow manual DTB load later in mach-virt and to avoid touching
all other boards to explicitly call arm_load_dtb().

 1) (ac9d32e hw/arm/boot: arm_load_kernel implemented as a machine init done notifier)

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1525691524-32265-4-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

platform-bus-device: use device plug callback instead of machine_done notifier

platform-bus were using machine_done notifier to get and map
(assign irq/mmio resources) dynamically added sysbus devices
after all '-device' options had been processed.
That however creates non obvious dependencies on ordering of
machine_done notifiers and requires carefull line juggling
to keep it working. For example see comment above
create_platform_bus() and 'straitforward' arm_load_kernel()
had to converted to machine_done notifier and that lead to
yet another machine_done notifier to keep it working
arm_register_platform_bus_fdt_creator().

Instead of hiding resource assignment in platform-bus-device
to magically initialize sysbus devices, use device plug
callback and assign resources explicitly at board level
at the moment each -device option is being processed.

That adds a bunch of machine declaration boiler plate to
e500plat board, similar to ARM/x86 but gets rid of hidden
machine_done notifier and would allow to remove the dependent
notifiers in ARM code simplifying it and making code flow
easier to follow.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1525691524-32265-3-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

pc: simplify MachineClass::get_hotplug_handler handling

By default MachineClass::get_hotplug_handler is NULL and concrete board
should set it to it's own handler.
Considering there isn't any default handler, drop saving empty
MachineClass::get_hotplug_handler in child class and make PC code
consistent with spapr/s390x boards.

We can bring this back when actual usecase surfaces and do it
consistently across boards that use get_hotplug_handler().

Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1525691524-32265-2-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

softfloat: Handle default NaN mode after pickNaNMulAdd, not before

It is implementation defined whether a multiply-add of
(0,inf,qnan) or (inf,0,qnan) raises InvalidaOperation or
not, so we let the target-specific pickNaNMulAdd function
handle this. This means that we must do the "return the
default NaN in default NaN mode" check after the call,
not before. Correct the ordering, and restore the comment
from the old propagateFloat64MulAddNaN() that warned about
this corner case.

This fixes a regression from 2.11 for Arm guests where we would
incorrectly fail to set the Invalid flag for these cases.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180504100547.14621-1-peter.maydell@linaro.org

hw/arm/iotkit.c: fix minor memory leak

Coverity (CID1390573) spots that we forgot to free the
gpioname strings in a loop in the iotkit realize function.
Correct the error.

This isn't a significant leak, because this function
only ever runs once.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20180427110137.19304-1-peter.maydell@linaro.org

MAINTAINERS: Add trace-events and qemu-option-trace.texi to tracing section

The "trace-events" and "qemu-option-trace.texi" files in the top directory
are currently "unmaintained" according to scripts/get_maintainer.pl. They
obviously belong to the Tracing section, so add an entry for them there.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1525840700-30635-1-git-send-email-thuth@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'remotes/riscv/tags/riscv-qemu-2.13-minor-fixes-3' into staging

RISC-V: QEMU 2.13 Minor Fixes

* Require libfdt when configuring for 'riscv*-softmmu'
* Increase HTIF priority and allow zero base address

# gpg: Signature made Wed 09 May 2018 11:15:33 BST
# gpg:                using DSA key 6BF1D7B357EF3E4F
# gpg: Good signature from "Michael Clark <michaeljclark@mac.com>"
# gpg:                 aka "Michael Clark <mjc@sifive.com>"
# gpg:                 aka "Michael Clark <michael@metaparadigm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7C99 930E B17C D8BA 073D  5EFA 6BF1 D7B3 57EF 3E4F

* remotes/riscv/tags/riscv-qemu-2.13-minor-fixes-3:
  riscv: requires libfdt
  riscv: htif: increase the priority of the htif subregion
  riscv: spike: allow base == 0

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/riscv: convert to TranslatorOps

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: convert to DisasContextBase

Notes:

- Did not convert {num,max}_insns, since the corresponding code
  will go away in the next patch.

- ctx->pc becomes ctx->base.pc_next, and ctx->next_pc becomes
  ctx->pc_succ_insn.

While at it, convert the remaining tb->cflags readers to tb_cflags().

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: convert to DisasJumpType

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/openrisc: convert to TranslatorOps

Notes:

- Changed the num_insns test in insn_start to check for
  dc->base.num_insns > 1, since when tb_start is first
  called in a TB, base.num_insns is already set to 1.

- Removed DISAS_NEXT from the switch in tb_stop; use
  DISAS_TOO_MANY instead.

- Added an assert_not_reached on tb_stop for DISAS_NEXT
  and the default case.

- Merged the two separate log_target_disas calls into the
  disas_log op.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/openrisc: convert to DisasContextBase

While at it, set is_jmp to DISAS_NORETURN when generating
an exception.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: convert to TranslatorOps

Note: I looked into dropping dc->do_debug. However, I don't see
an easy way to do it given that TOO_MANY is also valid
when we just translate more than max_insns. Thus, the check
for do_debug in "case DISAS_PC_CC_UPDATED" would still need
additional state to know whether or not we came from
breakpoint_check.

Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: convert to DisasContextBase

Notes:

- Did not convert {num,max}_insns and is_jmp, since the corresponding
  code will go away in the next patch.

- Avoided a checkpatch error in use_exit_tb.

- As suggested by David, (1) Drop ctx.pc and use
  ctx.base.pc_next instead, and (2) Rename ctx.next_pc to
  ctx.pc_tmp and add a comment about it.

Acked-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: convert to DisasJumpType

The only non-trivial modification is the use of DISAS_TOO_MANY
in the same way is used by the generic translation loop.

Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: convert to TranslatorOps

Notes:

- DISAS_TOO_MANY replaces the former "break" in the translation loop.
  However, care must be taken not to overwrite a previous condition
  in is_jmp; that's why in translate_insn we first check is_jmp and
  return if it's != DISAS_NEXT.

- Added an assert in translate_insn, before exiting due to an exception,
  to make sure that is_jmp is set to DISAS_NORETURN (the exception
  generation function always sets it.)

- Added an assert for the default case in is_jmp's switch.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: use *ctx for DisasContext

No changes to the logic here; this is just to make the diff
that follows easier to read.

While at it, remove the unnecessary 'struct' in
'struct TranslationBlock'.

Note that checkpatch complains with a false positive:
  ERROR: space prohibited after that '&' (ctx:WxW)
  #75: FILE: target/mips/translate.c:20220:
  +    ctx->kscrexist = (env->CP0_Config4 >> CP0C4_KScrExist) & 0xff;
                                                              ^
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: convert to DisasContextBase

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: convert to DisasJumpType

Notes:

- BS_EXCP in generate_exception_err and after hen_helper_wait
  becomes DISAS_NORETURN, because we do not return after
  raising an exception.

- Some uses of BS_EXCP are misleading in that they're used
  only as a "not BS_STOP" exit condition, i.e. they have nothing
  to do with an actual exception. For those cases, define
  and use DISAS_EXIT, which is clearer. With this and the
  above change, BS_EXCP goes away completely.

- fix a comment typo (s/intetrupt/interrupt/).

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: use lookup_and_goto_ptr on BS_STOP

The TB after BS_STOP is not fixed (e.g. helper_mtc0_hwrena
changes hflags, which ends up changing the TB flags via
cpu_get_tb_cpu_state). This requires a full lookup (i.e.
with flags) via lookup_and_goto_ptr instead of gen_goto_tb,
since the latter only looks at the PC for in-page goto's. Fix it.

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: convert to TranslatorOps

Notes:

- Moved the cross-page check from the end of translate_insn to
  init_disas_context.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: convert to DisasContextBase

Notes:

- pc and npc are left unmodified, since they can point to out-of-TB
  jump targets.

- Got rid of last_pc in gen_intermediate_code(), using base.pc_next
  instead. Only update pc_next (1) on a breakpoint (so that tb->size
  includes the insn), and (2) after reading the current instruction
  from memory. This allows us to use base.pc_next in the BP check,
  which is what the translator loop does.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sparc: convert to DisasJumpType

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sh4: convert to TranslatorOps

This was fairly straightforward since it had already been converted
to DisasContextBase; just had to add TARGET_TOO_MANY to the switch
in tb_stop.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

translator: merge max_insns into DisasContextBase

While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/microblaze: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/tilegx: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/unicore32: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/xtensa: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/lm32: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Michael Walle <michael@walle.cc>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/riscv: avoid integer overflow in next_page PC check

If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.

Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Limit the number of ops in a TB

In 6001f7729e12 we partially attempt to address the branch
displacement overflow caused by 15fa08f845.

However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c
is a testcase that contains a TB so large as to overflow anyway.
The limit here of 8000 ops produces a maximum output TB size of
24112 bytes on a ppc64le host with that test case.  This is still
much less than the maximum forward branch distance of 32764 bytes.

Cc: qemu-stable@nongnu.org
Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Fix dup_vec in non-AVX2 codepath

The VPUNPCKLD* instructions are all "non-destructive source",
indicated by "NDS" in the encoding string in the x86 ISA manual.
This means that they take two source operands, one of which is
encoded in the VEX.vvvv field. We were incorrectly treating them
as if they were destructive-source and passing 0 as the 'v'
argument of tcg_out_vex_modrm(). This meant we were always
using %xmm0 as one of the source operands, causing incorrect
results if the register allocator happened to want to use
something else. For instance the input AArch64 insn:
 DUP v26.16b, w21
which becomes TCG IR ops:
 dup_vec v128,e8,tmp2,x21
 st_vec v128,e8,tmp2,env,$0xa40
was assembled to:
0x607c568c:  c4 c1 7a 7e 86 e8 00 00  vmovq    0xe8(%r14), %xmm0
0x607c5694:  00
0x607c5695:  c5 f9 60 c8              vpunpcklbw %xmm0, %xmm0, %xmm1
0x607c5699:  c5 f9 61 c9              vpunpcklwd %xmm1, %xmm0, %xmm1
0x607c569d:  c5 f9 70 c9 00           vpshufd  $0, %xmm1, %xmm1
0x607c56a2:  c4 c1 7a 7f 8e 40 0a 00  vmovdqu  %xmm1, 0xa40(%r14)
0x607c56aa:  00

when the vpunpcklwd insn should be "%xmm1, %xmm1, %xmm1".
This resulted in our incorrectly setting the output vector to
q26=0000320000003200:0000320000003200
when given an input of x21 == 0000000002803200
rather than the expected all-zeroes.

Pass the correct source register number to tcg_out_vex_modrm()
for these insns.

Fixes: 770c2fc7bb70804a
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180504153431.5169-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

riscv: requires libfdt

When compiling on a machine without libfdt installed the configure script
should try to get libfdt from the git or should die because otherwise
CONFIG_LIBFDT is not set and the build process end in an error in the link
phase.. eg:

hw/riscv/virt.o: In function `riscv_virt_board_init':
qemu/src/hw/riscv/virt.c:317: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:319: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:345: undefined reference to `qemu_fdt_dumpdtb'
collect2: error: ld returned 1 exit status
make[1]: *** [qemu-system-riscv64] Error 1
make: *** [subdir-riscv64-softmmu] Error 2

Cc: qemu-stable@nongnu.org
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Message-Id: <1525360636-18229-4-git-send-email-frederic.konrad@adacore.com>

qemu-doc: provide details of supported build platforms

Describe the policy the project uses to decide which OS are supported as
build platforms. This will:

  - Allow maintainers to determine when the minimum version of a 3rd
    party piece of software can be increased without negatively
    impacting supported platforms.

  - Allow tailoring of CI environments to match the intended supported
    build platforms.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180504160026.14017-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

qemu-options: Remove deprecated -no-kvm-irqchip

We've never documented this option in our qemu-doc, so apart from the users
that already used the old qemu-kvm fork before, most users should not be
aware of this option at all. It's been marked as deprecated in the source
code for a long time already, and officially marked as deprecated in the
documentation since QEMU v2.10, so it should be fine to remove this now.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-options: Remove deprecated -no-kvm-pit-reinjection

Deprecated since the beginning when it was added for compatibility with
the ancient qemu-kvm fork of QEMU, and it even printed out the deprecation
warning since right from the start (i.e. QEMU v1.3.0), so it's really time
to remove this now.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-options: Bail out on unsupported options instead of silently ignoring them

The dangling remainder of the -tdf option revealed a deficiency in our
option parsing: Options that have been declared, but are not supported
in the switch-case statement in vl.c and not handled in the OS-specifc
os_parse_cmd_args() functions are currently silently ignored. We should
rather tell the users that they specified something that we can not
handle, so let's print an error message and exit instead.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-options: Remove remainders of the -tdf option

The -tdf options has been removed with d07aa197c5a1556449361a0cbb5108e2,
but apparently I forgot to remove the corresponding two lines from
qemu-options.hx, so this option is still "available" and just silently
ignored. Kill it now for good.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-2-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-options: Mark -virtioconsole as deprecated

The qemu-doc already states that this option is only maintained for
backward compatibility and "-device virtconsole" should be used
instead. So let's take the next step and mark this option officially
as deprecated.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525446790-16139-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: sev: fix memory leaks

Reported by Coverity.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

opts: don't silently truncate long option values

The existing QemuOpts parsing code uses a fixed size 1024 byte buffer
for storing the option values. If a value exceeded this size it was
silently truncated and no error reported to the user. Long option values
is not a common scenario, but it is conceivable that they will happen.
eg if the user has a very deeply nested filesystem it would be possible
to come up with a disk path that was > 1024 bytes. Most of the time if
such data was silently truncated, the user would get an error about
opening a non-existant disk. If they're unlucky though, QEMU might use a
completely different disk image from another VM, which could be
considered a security issue. Another example program was in using the
-smbios command line arg with very large data blobs. In this case the
silent truncation will be providing semantically incorrect data to the
guest OS for SMBIOS tables.

If the operating system didn't limit the user's argv when spawning QEMU,
the code should honour whatever length arguments were given without
imposing its own length restrictions. This patch thus changes the code
to use a heap allocated buffer for storing the values during parsing,
lifting the arbitrary length restriction.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180416111743.8473-4-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

opts: don't silently truncate long parameter keys

The existing QemuOpts parsing code uses a fixed size 128 byte buffer
for storing the parameter keys. If a key exceeded this size it was
silently truncate and no error reported to the user. This behaviour was
reasonable & harmless because traditionally the key names are all
statically declared, and it was known that no code was declaring a key
longer than 127 bytes. This assumption, however, ceased to be valid once
the block layer added support for dot-separate compound keys. This
syntax allows for keys that can be arbitrarily long, limited only by the
number of block drivers you can stack up. With this usage, silently
truncating the key name can never lead to correct behaviour.

Hopefully such truncation would turn into an error, when the block code
then tried to extract options later, but there's no guarantee that will
happen. It is conceivable that an option specified by the user may be
truncated and then ignored. This could have serious consequences,
possibly even leading to security problems if the ignored option set a
security relevant parameter.

If the operating system didn't limit the user's argv when spawning QEMU,
the code should honour whatever length arguments were given without
imposing its own length restrictions. This patch thus changes the code
to use a heap allocated buffer for storing the keys during parsing,
lifting the arbitrary length restriction.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180416111743.8473-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

accel: use g_strsplit for parsing accelerator names

Instead of re-using the get_opt_name() method from QemuOpts to split a
string on ':', just use g_strsplit().

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180416111743.8473-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

update-linux-headers: drop hyperv.h

As of mainline linux commit 5a485803221777013944cbd1a7cd5c62efba3ffa
"x86/hyper-v: move hyperv.h out of uapi" by Vitaly Kuznetsov, no linux
uapi header includes it, so we no longer need to create a stub for it.

Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180413143354.17614-1-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-thread: always keep the posix wrapper layer

We will conditionally have a wrapper layer depending on whether the host
has the PTHREAD_SETNAME capability.  It complicates stuff.  Let's keep
the wrapper there; we opt out the pthread_setname_np() call only.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180412053444.17801-1-peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

exec: reintroduce MemoryRegion caching

MemoryRegionCache was reverted to "normal" address_space_* operations
for 2.9, due to lack of support for IOMMUs.  Reinstate the
optimizations, caching only the IOMMU translation at address_cache_init
but not the IOMMU lookup and target AddressSpace translation are not
cached; now that MemoryRegionCache supports IOMMUs, it becomes more widely
applicable too.

The inlined fast path is defined in memory_ldst_cached.inc.h, while the
slow path uses memory_ldst.inc.c as before.  The smaller fast path causes
a little code size reduction in MemoryRegionCache users:

    hw/virtio/virtio.o text size before: 32373
    hw/virtio/virtio.o text size after: 31941

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

exec: extract address_space_translate_iommu, fix page_mask corner case

This will be used to process IOMMUs in a MemoryRegionCache.  This
includes a small bugfix, in that the returned page_mask is now
correctly -1 if the IOMMU memory region maps the entire address
space directly.  Previously, address_space_get_iotlb_entry would
return ~TARGET_PAGE_MASK.

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

exec: small changes to flatview_do_translate

Prepare for extracting the IOMMU part to a separate function.  Mostly
cosmetic; the only semantic change is that, if there is more than one
cascaded IOMMU and the second one fails to translate, *plen_out is now
adjusted according to the page mask of the first IOMMU.

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

exec: move memory access declarations to a common header, inline *_phys functions

For now, this reduces the text size very slightly due to the newly-added
inlining:

   text size before: 9301965
   text size after: 9300645

Later, however, the declarations in include/exec/memory_ldst.inc.h will be
reused for the MemoryRegionCache slow path functions.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

memdev: remove "id" property

The "id" property is unnecessary and can be replaced simply with
object_get_canonical_path_component.  This patch mostly undoes commit
e1ff3c67e8 ("monitor: fix qmp/hmp query-memdev not reporting IDs of
memory backends", 2017-01-12).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qom: allow object_get_canonical_path_component without parent

Just return NULL; any callers that cause a change in behavior
would have caused an assertion failure before, so this is safe.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

checkpatch.pl: add common glib defines to typelist

Otherwise it can warn this:

  ERROR: space prohibited between function name and open parenthesis '('

When with things like this:

  typedef gboolean (*it_tree_iterator)(ITValue start, ITValue end);

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: "Daniel P. Berrangé" <berrange@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180425070103.23723-1-peterx@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

cpus: tcg: fix never exiting loop on unplug

Commit 9b0605f9837b ("cpus: tcg: unregister thread with RCU, fix
exiting of loop on unplug") changed the exit condition of the loop in
the vCPU thread function but forgot to remove the beginning 'while (1)'
statement. The resulting code :

while (1) {
...
} while (!cpu->unplug || cpu_can_run(cpu));

is a sequence of two distinct two while() loops, the first not exiting
in case of an unplug event.

Remove the first while (1) to fix CPU unplug.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20180425131828.15604-1-clg@kaod.org>
Cc: qemu-stable@nongnu.org
Fixes: 9b0605f9837b68fd56c7fc7c96a3a1a3b983687d
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

cpus: Fix event order on resume of stopped guest

When resume of a stopped guest immediately runs into block device
errors, the BLOCK_IO_ERROR event is sent before the RESUME event.

Reproducer:

1. Create a scratch image
   $ dd if=/dev/zero of=scratch.img bs=1M count=100

   Size doesn't actually matter.

2. Prepare blkdebug configuration:

   $ cat >blkdebug.conf <<EOF
   [inject-error]
   event = "write_aio"
   errno = "5"
   EOF

   Note that errno 5 is EIO.

3. Run a guest with an additional scratch disk, i.e. with additional
   arguments
   -drive if=none,id=scratch-drive,format=raw,werror=stop,file=blkdebug:blkdebug.conf:scratch.img
   -device virtio-blk-pci,id=scratch,drive=scratch-drive

   The blkdebug part makes all writes to the scratch drive fail with
   EIO.  The werror=stop pauses the guest on write errors.

4. Connect to the QMP socket e.g. like this:
   $ socat UNIX:/your/qmp/socket READLINE,history=$HOME/.qmp_history,prompt='QMP> '

   Issue QMP command 'qmp_capabilities':
   QMP> { "execute": "qmp_capabilities" }

5. Boot the guest.

6. In the guest, write to the scratch disk, e.g. like this:

   # dd if=/dev/zero of=/dev/vdb count=1

   Do double-check the device specified with of= is actually the
   scratch device!

7. Issue QMP command 'cont':
   QMP> { "execute": "cont" }

After step 6, I get a BLOCK_IO_ERROR event followed by a STOP event.  Good.

After step 7, I get BLOCK_IO_ERROR, then RESUME, then STOP.  Not so
good; I'd expect RESUME, then BLOCK_IO_ERROR, then STOP.

The funny event order confuses libvirt: virsh -r domstate DOMAIN
--reason reports "paused (unknown)" rather than "paused (I/O error)".

The culprit is vm_prepare_start().

    /* Ensure that a STOP/RESUME pair of events is emitted if a
     * vmstop request was pending.  The BLOCK_IO_ERROR event, for
     * example, according to documentation is always followed by
     * the STOP event.
     */
    if (runstate_is_running()) {
        qapi_event_send_stop(&error_abort);
        res = -1;
    } else {
        replay_enable_events();
        cpu_enable_ticks();
        runstate_set(RUN_STATE_RUNNING);
        vm_state_notify(1, RUN_STATE_RUNNING);
    }

    /* We are sending this now, but the CPUs will be resumed shortly later */
    qapi_event_send_resume(&error_abort);
    return res;

When resuming a stopped guest, we take the else branch before we get
to sending RESUME.  vm_state_notify() runs virtio_vmstate_change(),
among other things.  This restarts I/O, triggering the BLOCK_IO_ERROR
event.

Reshuffle vm_prepare_start() to send the RESUME event earlier.

Fixes RHBZ 1566153.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180423084518.2426-1-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: recognize more rpmbuild macros

Extend the list of recognized, but ignored options from rpms %configure
macro. This fixes build on hosts running SUSE Linux.

Cc: qemu-stable@nongnu.org
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Message-Id: <20180418075045.27393-1-olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

riscv: htif: increase the priority of the htif subregion

The htif device is supposed to be mapped over an other subregion. So increase
its priority to one to avoid any conflict.

Here is the output of info mtree:

Before:
(qemu) info mtree
 address-space: memory
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 0, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

 address-space: I/O
   0000000000000000-000000000000ffff (prio 0, i/o): io

 address-space: cpu-memory-0
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 0, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

After:
 (qemu) info mtree
 address-space: memory
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 1, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

 address-space: I/O
   0000000000000000-000000000000ffff (prio 0, i/o): io

 address-space: cpu-memory-0
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 1, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Message-Id: <1525360636-18229-3-git-send-email-frederic.konrad@adacore.com>

riscv: spike: allow base == 0

The sanity check on base doesn't allow htif to be mapped @0. Check if the
symbol exists instead so we can map it where we want.

Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Message-Id: <1525360636-18229-2-git-send-email-frederic.konrad@adacore.com>

Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging

# gpg: Signature made Tue 08 May 2018 16:18:22 BST
# gpg:                using RSA key BDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* remotes/cody/tags/block-pull-request:
  sheepdog: Fix sd_co_create_opts() memory leaks
  iotests: Add test for cancelling a mirror job
  block/mirror: Make cancel always cancel pre-READY
  block/mirror: honor ratelimit again

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sheepdog: Fix sd_co_create_opts() memory leaks

Both the option string for the 'redundancy' option and the
SheepdogRedundancy object that is created accordingly could be leaked in
error paths. This fixes the memory leaks.

Reported by Coverity (CID 1390614 and 1390641).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20180503153509.22223-1-kwolf@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>

iotests: Add test for cancelling a mirror job

We already have an extensive mirror test (041) which does cover
cancelling a mirror job, especially after it has emitted the READY
event.  However, it does not check what exact events are emitted after
block-job-cancel is executed.  More importantly, it does not use
throttling to ensure that it covers the case of block-job-cancel before
READY.

It would be possible to add this case to 041, but considering it is
already our largest test file, it makes sense to create a new file for
these cases.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501220509.14152-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>

block/mirror: Make cancel always cancel pre-READY

Commit b76e4458b1eb3c32e9824fe6aa51f67d2b251748 made the mirror block
job respect block-job-cancel's @force flag: With that flag set, it would
now always really cancel, even post-READY.

Unfortunately, it had a side effect: Without that flag set, it would now
never cancel, not even before READY.  Considering that is an
incompatible change and not noted anywhere in the commit or the
description of block-job-cancel's @force parameter, this seems
unintentional and we should revert to the previous behavior, which is to
immediately cancel the job when block-job-cancel is called before source
and target are in sync (i.e. before the READY event).

Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1572856
Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180501220509.14152-2-mreitz@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>