virtiofsd: stay below fs.file-max sysctl value (CVE-2020-10717)

The system-wide fs.file-max sysctl value determines how many files can
be open.  It defaults to a value calculated based on the machine's RAM
size.  Previously virtiofsd would try to set RLIMIT_NOFILE to 1,000,000
and this allowed the FUSE client to exhaust the number of open files
system-wide on Linux hosts with less than 10 GB of RAM!

Take fs.file-max into account when choosing the default RLIMIT_NOFILE
value.

Fixes: CVE-2020-10717
Reported-by: Yuval Avrahami <yavrahami@paloaltonetworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200501140644.220940-3-stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

virtiofsd: add --rlimit-nofile=NUM option

Make it possible to specify the RLIMIT_NOFILE on the command-line.
Users running multiple virtiofsd processes should allocate a certain
number to each process so that the system-wide limit can never be
exhausted.

When this option is set to 0 the rlimit is left at its current value.
This is useful when a management tool wants to configure the rlimit
itself.

The default behavior remains unchanged: try to set the limit to
1,000,000 file descriptors if the current rlimit is lower.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200501140644.220940-2-stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Fix resize (extending) of short overlays
- nvme: introduce PMR support from NVMe 1.4 spec
- qemu-storage-daemon: Fix non-string --object properties

# gpg: Signature made Thu 30 Apr 2020 16:51:45 BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qemu-storage-daemon: Fix non-string --object properties
  qom: Factor out user_creatable_add_dict()
  nvme: introduce PMR support from NVMe 1.4 spec
  qcow2: Forward ZERO_WRITE flag for full preallocation
  iotests: Test committing to short backing file
  iotests: Filter testfiles out in filter_img_info()
  block: truncate: Don't make backing file data visible
  file-posix: Support BDRV_REQ_ZERO_WRITE for truncate
  raw-format: Support BDRV_REQ_ZERO_WRITE for truncate
  qcow2: Support BDRV_REQ_ZERO_WRITE for truncate
  block-backend: Add flags to blk_truncate()
  block: Add flags to bdrv(_co)_truncate()
  block: Add flags to BlockDriver.bdrv_co_truncate()
  qemu-iotests: allow qcow2 external discarded clusters to contain stale data
  qcow2: Add incompatibility note between backing files and raw external data files

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qemu-storage-daemon: Fix non-string --object properties

After processing the option string with the keyval parser, we get a
QDict that contains only strings. This QDict must be fed to a keyval
visitor which converts the strings into the right data types.

qmp_object_add(), however, uses the normal QObject input visitor, which
expects a QDict where all properties already have the QType that matches
the data type required by the QOM object type.

Change the --object implementation in qemu-storage-daemon so that it
doesn't call qmp_object_add(), but calls user_creatable_add_dict()
directly instead and pass it a new keyval boolean that decides which
visitor must be used.

Reported-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qom: Factor out user_creatable_add_dict()

The QMP handler qmp_object_add() and the implementation of --object in
qemu-storage-daemon can share most of the code. Currently,
qemu-storage-daemon calls qmp_object_add(), but this is not correct
because different visitors need to be used.

As a first step towards a fix, make qmp_object_add() a wrapper around a
new function user_creatable_add_dict() that can get an additional
parameter. The handling of "props" is only required for compatibility
and not required for the qemu-storage-daemon command line, so it stays
in qmp_object_add().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

nvme: introduce PMR support from NVMe 1.4 spec

This patch introduces support for PMR that has been defined as part of NVMe 1.4
spec. User can now specify a pmrdev option that should point to HostMemoryBackend.
pmrdev memory region will subsequently be exposed as PCI BAR 2 in emulated NVMe
device. Guest OS can perform mmio read and writes to the PMR region that will stay
persistent across system reboot.

Signed-off-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200330164656.9348-1-andrzej.jakowski@linux.intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qcow2: Forward ZERO_WRITE flag for full preallocation

The BDRV_REQ_ZERO_WRITE is currently implemented in a way that first the
image is possibly preallocated and then the zero flag is added to all
clusters. This means that a copy-on-write operation may be needed when
writing to these clusters, despite having used preallocation, negating
one of the major benefits of preallocation.

Instead, try to forward the BDRV_REQ_ZERO_WRITE to the protocol driver,
and if the protocol driver can ensure that the new area reads as zeros,
we can skip setting the zero flag in the qcow2 layer.

Unfortunately, the same approach doesn't work for metadata
preallocation, so we'll still set the zero flag there.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424142701.67053-1-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iotests: Test committing to short backing file

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200424125448.63318-10-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iotests: Filter testfiles out in filter_img_info()

We want to keep TEST_IMG for the full path of the main test image, but
filter_testfiles() must be called for other test images before replacing
other things like the image format because the test directory path could
contain the format as a substring.

Insert a filter_testfiles() call between both.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200424125448.63318-9-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: truncate: Don't make backing file data visible

When extending the size of an image that has a backing file larger than
its old size, make sure that the backing file data doesn't become
visible in the guest, but the added area is properly zeroed out.

Consider the following scenario where the overlay is shorter than its
backing file:

    base.qcow2:     AAAAAAAA
    overlay.qcow2:  BBBB

When resizing (extending) overlay.qcow2, the new blocks should not stay
unallocated and make the additional As from base.qcow2 visible like
before this patch, but zeros should be read.

A similar case happens with the various variants of a commit job when an
intermediate file is short (- for unallocated):

    base.qcow2:     A-A-AAAA
    mid.qcow2:      BB-B
    top.qcow2:      C--C--C-

After commit top.qcow2 to mid.qcow2, the following happens:

    mid.qcow2:      CB-C00C0 (correct result)
    mid.qcow2:      CB-C--C- (before this fix)

Without the fix, blocks that previously read as zeros on top.qcow2
suddenly turn into A.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200424125448.63318-8-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

file-posix: Support BDRV_REQ_ZERO_WRITE for truncate

For regular files, we always get BDRV_REQ_ZERO_WRITE behaviour from the
OS, so we can advertise the flag and just ignore it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

raw-format: Support BDRV_REQ_ZERO_WRITE for truncate

The raw format driver can simply forward the flag and let its bs->file
child take care of actually providing the zeros.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200424125448.63318-6-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qcow2: Support BDRV_REQ_ZERO_WRITE for truncate

If BDRV_REQ_ZERO_WRITE is set and we're extending the image, calling
qcow2_cluster_zeroize() with flags=0 does the right thing: It doesn't
undo any previous preallocation, but just adds the zero flag to all
relevant L2 entries. If an external data file is in use, a write_zeroes
request to the data file is made instead.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200424125448.63318-5-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block-backend: Add flags to blk_truncate()

Now that node level interface bdrv_truncate() supports passing request
flags to the block driver, expose this on the BlockBackend level, too.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Add flags to bdrv(_co)_truncate()

Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Add flags to BlockDriver.bdrv_co_truncate()

This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.

For now, we always pass 0 and no drivers declare support for any flag.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-iotests: allow qcow2 external discarded clusters to contain stale data

Test 244 checks the expected behavior of qcow2 external data files
with respect to zero and discarded clusters.  Filesystems however
are free to ignore discard requests, and this seems to be the
case for overlayfs.  Relax the tests to skip checks on the
external data file for discarded areas, which implies not using
qemu-img compare in the data_file_raw=on case.

This fixes docker tests on RHEL8.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200409191006.24429-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qcow2: Add incompatibility note between backing files and raw external data files

Backing files and raw external data files are mutually exclusive.
The documentation of the raw external data bit (in autoclear_features)
already indicates that, but we should also mention it on the other
side.

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200410121816.8334-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Merge remote-tracking branch 'remotes/edgar/tags/edgar/xilinx-next-2020-04-30.for-upstream' into staging

For upstream

# gpg: Signature made Thu 30 Apr 2020 11:14:13 BST
# gpg:                using RSA key AC44FEDC14F7F1EBEDBF415129C596780F6BCA83
# gpg: Good signature from "Edgar E. Iglesias (Xilinx key) <edgar.iglesias@xilinx.com>" [unknown]
# gpg:                 aka "Edgar E. Iglesias <edgar.iglesias@gmail.com>" [full]
# Primary key fingerprint: AC44 FEDC 14F7 F1EB EDBF  4151 29C5 9678 0F6B CA83

* remotes/edgar/tags/edgar/xilinx-next-2020-04-30.for-upstream:
  target/microblaze: Add the pvr-user2 property
  target/microblaze: Add the pvr-user1 property
  target/microblaze: Add the unaligned-exceptions property
  target/microblaze: Add the div-zero-exception property
  target/microblaze: Add the ill-opcode-exception property
  target/microblaze: Add the opcode-0x0-illegal CPU property

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200430-1' into staging

target-arm queue:
 * xlnx-zdma: Fix endianness handling of descriptor loading
 * nrf51: Fix last GPIO CNF address
 * gicv3: Use gicr_typer in arm_gicv3_icc_reset
 * msf2: Add EMAC block to SmartFusion2 SoC
 * New clock modelling framework
 * hw/arm: versal: Setup the ADMA with 128bit bus-width
 * Cadence: gem: fix wraparound in 64bit descriptors
 * cadence_gem: clear RX control descriptor
 * target/arm: Vectorize integer comparison vs zero
 * hw/arm/virt: dt: add kaslr-seed property
 * hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes

# gpg: Signature made Thu 30 Apr 2020 15:43:54 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200430-1: (30 commits)
  hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes
  hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102
  device_tree: Constify compat in qemu_fdt_node_path()
  device_tree: Allow name wildcards in qemu_fdt_node_path()
  target/arm/cpu: Update coding style to make checkpatch.pl happy
  target/arm: Make cpu_register() available for other files
  target/arm: Restrict the Address Translate write operation to TCG accel
  hw/arm/virt: dt: add kaslr-seed property
  hw/arm/virt: dt: move creation of /secure-chosen to create_fdt()
  target/arm: Vectorize integer comparison vs zero
  net: cadence_gem: clear RX control descriptor
  Cadence: gem: fix wraparound in 64bit descriptors
  hw/arm: versal: Setup the ADMA with 128bit bus-width
  qdev-monitor: print the device's clock with info qtree
  hw/arm/xilinx_zynq: connect uart clocks to slcr
  hw/char/cadence_uart: add clock support
  hw/misc/zynq_slcr: add clock generation for uarts
  docs/clocks: add device's clock documentation
  qdev-clock: introduce an init array to ease the device construction
  qdev: add clock input&output support to devices.
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes

Disable unsupported FDT firmware nodes if a user passes us
a DTB with nodes enabled that the machine cannot support
due to lack of EL3 or EL2 support.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102

Move arm_boot_info into XlnxZCU102.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

device_tree: Constify compat in qemu_fdt_node_path()

Make compat in qemu_fdt_node_path() const char *.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-3-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

device_tree: Allow name wildcards in qemu_fdt_node_path()

Allow name wildcards in qemu_fdt_node_path(). This is useful
to find all nodes with a given compatibility string.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200423121114.4274-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm/cpu: Update coding style to make checkpatch.pl happy

We will move this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Make cpu_register() available for other files

Make cpu_register() (renamed to arm_cpu_register()) available
from internals.h so we can register CPUs also from other files
in the future.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-3-philmd@redhat.com
Message-ID: <20190921150420.30743-2-thuth@redhat.com>
[PMD: Only take cpu_register() from Thomas's patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Restrict the Address Translate write operation to TCG accel

Under KVM these registers are written by the hardware.
Restrict the writefn handlers to TCG to avoid when building
without TCG:

      LINK    aarch64-softmmu/qemu-system-aarch64
    target/arm/helper.o: In function `do_ats_write':
    target/arm/helper.c:3524: undefined reference to `raise_exception'

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/virt: dt: add kaslr-seed property

Generate random seeds to be used by the non-secure and/or secure OSes
for ASLR. The seeds are 64-bit random values exported via the DT
properties /chosen/kaslr-seed [1] and /secure-chosen/kaslr-seed, the
latter being used by OP-TEE [2].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e5bc0c37c97e1
[2] https://github.com/OP-TEE/optee_os/commit/ef262691fe0e

Signed-off-by: Jerome Forissier <jerome@forissier.org>
Message-id: 20200420121807.8204-3-jerome@forissier.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/virt: dt: move creation of /secure-chosen to create_fdt()

The /secure-chosen node is currently used only by create_uart(), but
this will change. Therefore move the creation of this node to
create_fdt().

Signed-off-by: Jerome Forissier <jerome@forissier.org>
Message-id: 20200420121807.8204-2-jerome@forissier.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Vectorize integer comparison vs zero

These instructions are often used in glibc's string routines.
They were the final uses of the 32-bit at a time neon helpers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200418162808.4680-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

net: cadence_gem: clear RX control descriptor

The RX ring descriptors control field is used for setting
SOF and EOF (start of frame and end of frame).
The SOF and EOF weren't cleared from the previous descriptors,
causing inconsistencies in ring buffer.
Fix that by clearing the control field of every descriptors we're
processing.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200418085145.489726-1-rfried.dev@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Cadence: gem: fix wraparound in 64bit descriptors

Wraparound of TX descriptor cyclic buffer only updated
the low 32 bits of the descriptor.
Fix that by checking if we're working with 64bit descriptors.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200417171736.441607-1-rfried.dev@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: versal: Setup the ADMA with 128bit bus-width

Setup the ADMA with 128bit bus-width. This matters when
FIXED BURST mode is used.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200417153800.27399-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qdev-monitor: print the device's clock with info qtree

This prints the clocks attached to a DeviceState when using
"info qtree" monitor command. For every clock, it displays the
direction, the name and if the clock is forwarded. For input clock,
it displays also the frequency.

This is based on the original work of Frederic Konrad.

Here follows a sample of `info qtree` output on xilinx_zynq machine
after linux boot with only one uart clocked:
> bus: main-system-bus
>  type System
>  [...]
>  dev: cadence_uart, id ""
>    gpio-out "sysbus-irq" 1
>    clock-in "refclk" freq_hz=0.000000e+00
>    chardev = ""
>    mmio 00000000e0001000/0000000000001000
>  dev: cadence_uart, id ""
>    gpio-out "sysbus-irq" 1
>    clock-in "refclk" freq_hz=1.375661e+07
>    chardev = "serial0"
>    mmio 00000000e0000000/0000000000001000
>  [...]
>  dev: xilinx,zynq_slcr, id ""
>    clock-out "uart1_ref_clk" freq_hz=0.000000e+00
>    clock-out "uart0_ref_clk" freq_hz=1.375661e+07
>    clock-in "ps_clk" freq_hz=3.333333e+07
>    mmio 00000000f8000000/0000000000001000

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-10-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xilinx_zynq: connect uart clocks to slcr

Add the connection between the slcr's output clocks and the uarts inputs.

Also add the main board clock 'ps_clk', which is hard-coded to 33.33MHz
(the default frequency). This clock is used to feed the slcr's input
clock.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-9-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/char/cadence_uart: add clock support

Switch the cadence uart to multi-phase reset and add the
reference clock input.

The input clock frequency is added to the migration structure.

The reference clock controls the baudrate generation. If it disabled,
any input characters and events are ignored.

If this clock remains unconnected, the uart behaves as before
(it default to a 50MHz ref clock).

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc/zynq_slcr: add clock generation for uarts

Add some clocks to zynq_slcr
+ the main input clock (ps_clk)
+ the reference clock outputs for each uart (uart0 & 1)

This commit also transitional the slcr to multi-phase reset as it is
required to initialize the clocks correctly.

The clock frequencies are computed using the internal pll & uart configuration
registers and the input ps_clk frequency.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-7-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/clocks: add device's clock documentation

Add the documentation about the clock inputs and outputs in devices.

This is based on the original work of Frederic Konrad.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-6-damien.hedde@greensocs.com
[PMM: Editing pass for minor grammar, style and Sphinx
 formatting fixes]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qdev-clock: introduce an init array to ease the device construction

Introduce a function and macro helpers to setup several clocks
in a device from a static array description.

An element of the array describes the clock (name and direction) as
well as the related callback and an optional offset to store the
created object pointer in the device state structure.

The array must be terminated by a special element QDEV_CLOCK_END.

This is based on the original work of Frederic Konrad.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qdev: add clock input&output support to devices.

Add functions to easily handle clocks with devices.
Clock inputs and outputs should be used to handle clock propagation
between devices.
The API is very similar the GPIO API.

This is based on the original work of Frederic Konrad.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-4-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/core/clock-vmstate: define a vmstate entry for clock state

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-3-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200430' into staging

- update Linux headers to 5.7-rc3 (and virtio-net fixup)
- support for protected virtualization aka secure execution

# gpg: Signature made Thu 30 Apr 2020 10:41:31 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [marginal]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [marginal]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20200430:
  s390x/s390-virtio-ccw: Fix build on systems without KVM
  s390x/pv: Retry ioctls on -EINTR
  s390x: protvirt: Fix stray error_report_err in s390_machine_protect
  s390x: Add unpack facility feature to GA1
  docs: system: Add protvirt docs
  s390x: protvirt: Handle SIGP store status correctly
  s390x: protvirt: Move IO control structures over SIDA
  s390x: protvirt: Disable address checks for PV guest IO emulation
  s390x: protvirt: Move diag 308 data over SIDA
  s390x: protvirt: Set guest IPL PSW
  s390x: protvirt: SCLP interpretation
  s390x: protvirt: Move STSI data over SIDAD
  s390x: Add SIDA memory ops
  s390x: protvirt: KVM intercept changes
  s390x: protvirt: Inhibit balloon when switching to protected mode
  s390x: protvirt: Add migration blocker
  s390x: protvirt: Support unpack facility
  s390x: Move diagnose 308 subcodes and rcs into ipl.h
  linux-headers: update against Linux 5.7-rc3
  virtio-net: fix rsc_ext compat handling

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-04-30' into staging

QAPI patches for 2020-04-30

# gpg: Signature made Thu 30 Apr 2020 06:29:18 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-04-30:
  qapi: Generate simpler marshalling code when no arguments
  qapi: Disallow qmp_marshal_FOO(NULL, ...)
  qom: Simplify object_property_get_enum()
  qapi: Only input visitors can actually fail
  qapi: Assert non-input visitors see only valid alternate tags
  qapi: Clean up visitor's recovery from input with invalid type
  qapi: Assert non-input visitors see only valid narrow integers
  qapi: Assert output visitors see only valid enum values
  qapi: Fix Visitor contract for start_alternate()
  qapi: Assert incomplete object occurs only in dealloc visitor
  qapi: Polish prose in visitor.h
  qapi: Document @errp usage more thoroughly in visitor.h
  qapi: Fix typo in visit_start_list()'s contract
  qapi: Fix the virtual walk example in visitor.h's big comment
  qapi: Belatedly update visitor.h's big comment for QAPI modules
  qemu-option: Clean up after the previous commit
  qobject: Eliminate qdict_iter(), use qdict_first(), qdict_next()
  qobject: Eliminate qlist_iter(), use QLIST_FOREACH_ENTRY() instead
  qobject: Factor out helper json_pretty_newline()
  qobject: Clean up QLIST_FOREACH_ENTRY()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/core/clock: introduce clock object

This object may be used to represent a clock inside a clock tree.

A clock may be connected to another clock so that it receives update,
through a callback, whenever the source/parent clock is updated.

Although only the root clock of a clock tree controls the values
(represented as periods) of all clocks in tree, each clock holds
a local state containing the current value so that it can be fetched
independently. It will allows us to fullfill migration requirements
by migrating each clock independently of others.

This is based on the original work of Frederic Konrad.

Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com
[PMM: Use uint64_t rather than unsigned long long in trace events;
 the dtrace backend can't handle the latter]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/boot_linux_console: Add ethernet test to SmartFusion2

In addition to simple serial test this patch uses ping
to test the ethernet block modelled in SmartFusion2 SoC.

Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-4-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

msf2: Add EMAC block to SmartFusion2 SoC

With SmartFusion2 Ethernet MAC model in
place this patch adds the same to SoC.

Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-3-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/net: Add Smartfusion2 emac block

Modelled Ethernet MAC of Smartfusion2 SoC.
Micrel KSZ8051 PHY is present on Emcraft's
SOM kit hence same PHY is emulated.

Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1587048891-30493-2-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Typo: Correct the name of CPU hotplug memory region

Replace "acpi-mem-hotplug" with "acpi-cpu-hotplug"

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200413091552.62748-4-zhukeqian1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

bugfix: Use gicr_typer in arm_gicv3_icc_reset

The KVM_VGIC_ATTR macro expect the second parameter as gicr_typer,
of which high 32bit is constructed by mp_affinity. For most case,
the high 32bit of mp_affinity is zero, so it will always access the
ICC_CTLR_EL1 of CPU0.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200413091552.62748-2-zhukeqian1@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

nrf51: Fix last GPIO CNF address

NRF51_GPIO_REG_CNF_END doesn't actually refer to the start of the last
valid CNF register: it's referring to the last byte of the last valid
CNF register.

This hasn't been a problem up to now, as current implementation in
memory.c turns an unaligned 4-byte read from 0x77f to a single byte read
and the qtest only looks at the least-significant byte of the register.

But when running with patches which fix unaligned accesses in memory.c,
the qtest breaks.

Considering NRF51 doesn't support unaligned accesses, the simplest fix
is to actually set NRF51_GPIO_REG_CNF_END to the start of the last valid
CNF register: 0x77c.

Now, qtests work with or without the unaligned access patches.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-id: 51b427f06838622da783d38ba56e3630d6d85c60.1586925392.git.dirty@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dma/xlnx-zdma: Fix descriptor loading (REG) wrt endianness

Fix descriptor loading from registers wrt host endianness.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20200404122718.25111-3-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dma/xlnx-zdma: Fix descriptor loading (MEM) wrt endianness

Fix descriptor loading from memory wrt host endianness.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200404122718.25111-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/microblaze: Add the pvr-user2 property

Add the pvr-user2 property to control the user-defined
PVR1 User2 register.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>

target/microblaze: Add the pvr-user1 property

Add the pvr-user1 property to control the user-defined
PVR0 User1 field.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>

target/microblaze: Add the unaligned-exceptions property

Add the unaligned-exceptions property to control if the core
traps unaligned memory accesses.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>

target/microblaze: Add the div-zero-exception property

Add the div-zero-exception property to control if the core
traps divizions by zero.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>

target/microblaze: Add the ill-opcode-exception property

Add the ill-opcode-exception property to control if illegal
instructions will raise exceptions.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>

target/microblaze: Add the opcode-0x0-illegal CPU property

Add the opcode-0x0-illegal CPU property to control if the core
should trap opcode zero as illegal.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>

qapi: Generate simpler marshalling code when no arguments

When command FOO has no arguments, its generated qmp_marshal_FOO() is
a bit confusing.  Make it simpler:

     visit_start_struct(v, NULL, NULL, 0, &err);
     if (err) {
         goto out;
     }
-
-    if (!err) {
-        visit_check_struct(v, &err);
-    }
+    visit_check_struct(v, &err);
     visit_end_struct(v, NULL);
     if (err) {
         goto out;
     }

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-16-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qapi: Disallow qmp_marshal_FOO(NULL, ...)

For QMP commands without arguments, gen_marshal() laboriously
generates a qmp_marshal_FOO() that copes with null @args.  Turns
there's just one caller that passes null instead of an empty QDict.
Adjust that caller, and simplify gen_marshal().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qom: Simplify object_property_get_enum()

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-14-armbru@redhat.com>

qapi: Only input visitors can actually fail

The previous few commits have made this more obvious, and removed the
one exception.  Time to clarify the documentation, and drop dead error
checking.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>

qapi: Assert non-input visitors see only valid alternate tags

An alternate type's visit_type_FOO() fails when it runs into an
invalid ->type.

This is appropriate with an input visitor: visit_start_alternate()
sets ->type according to the input, and bad input can lead to bad
->type.

It should never happen with an output, clone or dealloc visitor: if it
did, the alternate being output, cloned or deallocated would be messed
up beyond repair.  Assert that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-12-armbru@redhat.com>

qapi: Clean up visitor's recovery from input with invalid type

An alternate type's visit_type_FOO() fails when it runs into an
invalid ->type.  If it's an input visit, we then need to free the the
object we got from visit_start_alternate().  We do that with
qapi_free_FOO(), which uses the dealloc visitor.

Trouble is that object is in a bad state: its ->type is invalid.  So
the dealloc visitor will run into the same error again, and the error
recovery skips deallocating the alternate's (invalid) alternative.
Works, because qapi_free_FOO() ignores the error.

Avoid it instead: free the messed up object with by g_free().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-11-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qapi: Assert non-input visitors see only valid narrow integers

visit_type_intN() and visit_type_uintN() fail when the value is out of
bounds.

This is appropriate with an input visitor: the value comes from input,
and input may be bad.

It should never happen with the other visitors: the value comes from
the caller, and callers must keep it within bounds.  Assert that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-10-armbru@redhat.com>

qapi: Assert output visitors see only valid enum values

output_type_enum() fails when *obj is not a valid value of the enum
type.  Should not happen.  Drop the check, along with its unit tests.
This unmasks qapi_enum_lookup()'s assertion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-9-armbru@redhat.com>
[Commit message tweaked]

qapi: Fix Visitor contract for start_alternate()

The contract demands v->start_alternate() for input and dealloc
visitors, but visit_start_alternate() actually requires it for input
and clone visitors.  Fix the contract, and delete superfluous
qapi_dealloc_start_alternate().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-8-armbru@redhat.com>

qapi: Assert incomplete object occurs only in dealloc visitor

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-7-armbru@redhat.com>

qapi: Polish prose in visitor.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-6-armbru@redhat.com>

qapi: Document @errp usage more thoroughly in visitor.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-5-armbru@redhat.com>

qapi: Fix typo in visit_start_list()'s contract

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-4-armbru@redhat.com>

qapi: Fix the virtual walk example in visitor.h's big comment

Call visit_check_list().  Missed in commit a4a1c70dc7 "qapi: Make
input visitors detect unvisited list tails".

Drop an irrelevant error_propagate() while there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-3-armbru@redhat.com>

qapi: Belatedly update visitor.h's big comment for QAPI modules

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-2-armbru@redhat.com>

qemu-option: Clean up after the previous commit

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qobject: Eliminate qdict_iter(), use qdict_first(), qdict_next()

qdict_iter() has just three uses and no test coverage.  Replace by
qdict_first(), qdict_next() for more concise code and less type
punning.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qobject: Eliminate qlist_iter(), use QLIST_FOREACH_ENTRY() instead

qlist_iter() has just three uses outside tests/.  Replace by
QLIST_FOREACH_ENTRY() for more concise code and less type punning.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qobject: Factor out helper json_pretty_newline()

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Coding style in moved code tidied up]

qobject: Clean up QLIST_FOREACH_ENTRY()

QLIST_FOREACH_ENTRY() traverses a tail queue manually.  Use
QTAILQ_FIRST() and QTAILQ_NEXT() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200429-2' into staging

RISC-V pull request for 5.1

This is the first pull request for the 5.1 development period. It
contains all of the patches that were sent during the 5.0 timeframe.

This is an assortment of fixes for RISC-V, including fixes for the
Hypervisor extension, the Spike machine and an update to OpenSBI.

# gpg: Signature made Wed 29 Apr 2020 21:17:17 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200429-2:
  hw/riscv/spike: Allow more than one CPUs
  hw/riscv/spike: Allow loading firmware separately using -bios option
  hw/riscv: Add optional symbol callback ptr to riscv_load_firmware()
  roms: opensbi: Upgrade from v0.6 to v0.7
  linux-user/riscv: fix up struct target_ucontext definition
  target/riscv: Add a sifive-e34 cpu type
  riscv: sifive_e: Support changing CPU type
  hw/riscv: Generate correct "mmu-type" for 32-bit machines
  riscv: Fix Stage2 SV32 page table walk
  riscv: AND stage-1 and stage-2 protection flags
  riscv: Don't use stage-2 PTE lookup protection flags
  riscv/sifive_u: Add a serial property to the sifive_u machine
  riscv/sifive_u: Add a serial property to the sifive_u SoC
  riscv/sifive_u: Fix up file ordering

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/riscv/spike: Allow more than one CPUs

Currently, the upstream Spike ISA simulator allows more than
one CPUs so we update QEMU Spike machine on similar lines to
allow more than one CPUs.

The maximum number of CPUs for QEMU Spike machine is kept
same as QEMU Virt machine.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200427080644.168461-4-anup.patel@wdc.com
Message-Id: <20200427080644.168461-4-anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv/spike: Allow loading firmware separately using -bios option

This patch extends Spike machine support to allow loading OpenSBI
firmware (fw_jump.elf) separately using -bios option.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200427080644.168461-3-anup.patel@wdc.com
Message-Id: <20200427080644.168461-3-anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: Add optional symbol callback ptr to riscv_load_firmware()

This patch adds an optional function pointer, "sym_cb", to
riscv_load_firmware() which provides the possibility to access
the symbol table during kernel loading.

The pointer is ignored, if supplied with flat (non-elf) firmware image.

The Spike board requires it locate the HTIF symbols from firmware ELF
passed via "-bios" option.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200427080644.168461-2-anup.patel@wdc.com
Message-Id: <20200427080644.168461-2-anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

roms: opensbi: Upgrade from v0.6 to v0.7

Upgrade OpenSBI from v0.6 to v0.7 and the pre-built bios images.

The v0.7 release includes the following commits:

f64f4b9 lib: Add a new platform feature to bringup secondary harts
b677a9b lib: Implement hart hotplug
5b48240 lib: Add possible hart status values
e3f69fc lib: Implement Hart State Management (HSM) SBI extension
6704216 lib: Check MSIP bit after returning from WFI
82ae8e8 makefile: Do setup of the install target more flexible
e1a5b73 platform: sifive: fu540: allow sv32 as an mmu-type
8c83fb2 lib: Fix return type of sbi_hsm_hart_started()
00d332b include: Move bits related defines and macros to sbi_bitops.h
a148996 include: sbi_bitops: More useful bit operations
4a603eb platform: kendryte/k210: Set per-HART stack size to 8KB
678c3c3 include: sbi_scratch: Set per-HART scratch size to 4KB
2abc55b lib: Sort build objects in alphabetical order
6e87507 platform: ae350: Sort build objects in alphabetical order
650c0e5 lib: sbi: Fix coding style issues
078686d lib: serial: Fix coding style issues
3226bd9 lib: Simple bitmap library
c741abc include: Simple hartmask library
d6d7e18 lib: sbi_init: Don't allow HARTID greater than SBI_HARTMASK_MAX_BITS
a4a6a81 lib: Introduce SBI_TLB_INFO_INIT() helper macro
d963164 lib: sbi_tlb: Use sbi_hartmask in sbi_tlb_info
71d2b83 lib: Move all coldboot wait APIs to sbi_init.c
2b945fc lib: sbi_init: Use hartmask for coldboot wait
44ce5b9 include: Remove disabled_hart_mask from sbi_platform
2db381f lib: Introduce sbi_hsm_hart_started_mask() API
61f7768 lib: sbi_ecall_legacy: Use sbi_hsm_hart_started_mask() API
466fecb lib: sbi_system: Use sbi_hsm_hart_started_mask() API
9aad831 lib: sbi_ipi: Use sbi_hsm_hart_started_mask() API
eede1aa lib: sbi_hart: Remove HART available mask and related APIs
757bb44 docs: Remove out-of-date documentation
86d37bb lib: sbi: Fix misaligned trap handling
ffdc858 platform: ariane-fpga: Change license for ariane-fpga from GPL-2.0 to BSD-2
4b2f594 sbi: Add definitions for true/false
0cfe49a libfdt: Add INT32_MAX and UINT32_MAX in libfdt_env.h
baac7e0 libfdt: Upgrade to v1.5.1 release
f92147c include: Make sbi_hart_id_to_scratch() as macro
eeae3d9 firmware: fw_base: Optimize _hartid_to_scratch() implementation
16e7071 lib: sbi_hsm: Optimize sbi_hsm_hart_get_state() implementation
823345e include: Make sbi_current_hartid() as macro in riscv_asm.h
9aabba2 Makefile: Fix distclean make target
9275ed3 platform: ariane-fpga: Set per-HART stack size to 8KB
2343efd platform: Set per-HART stack size to 8KB in the template platform codes
72a0628 platform: Use one unified per-HART stack size macro for all platforms
327ba36 scripts: Cover sifive/fu540 in the 32-bit build
5fbcd62 lib: sbi: Update pmp_get() to return decoded size directly
dce8846 libfdt: Compile fdt_addresses.c
fcb1ded lib: utils: Add a fdt_reserved_memory_fixup() helper
666be6d platform: Clean up include header files
6af5576 lib: utils: Move PLIC DT fix up codes to fdt_helper.c
e846ce1 platform: andes/ae350: Fix up DT for reserved memory
8135520 platform: ariane-fpga: Fix up DT for reserved memory
c9a5268 platform: qemu/virt: Fix up DT for reserved memory
6f9bb83 platform: sifive/fu540: Fix up DT for reserved memory
1071f05 platform: sifive/fu540: Remove "stdout-path" fix-up
dd9439f lib: utils: Add a fdt_cpu_fixup() helper
3f1c847 platform: sifive/fu540: Replace cpu0 node fix-up with the new helper
db6a2b5 lib: utils: Add a general device tree fix-up helper
3f8d754 platform: Update to call general DT fix-up helper
87a7ef7 lib: sbi_scratch: Introduce HART id to scratch table
e23d3ba include: Simplify HART id to scratch macro
19bd531 lib: sbi_hsm: Simplify hart_get_state() and hart_started() APIs
3ebfe0e lib: sbi_tlb: Simplify sbi_tlb_entry_process() function
209134d lib: Handle failure of sbi_hartid_to_scratch() API
bd6ef02 include: sbi_platform: Improve sbi_platform_hart_disabled() API
c9f60fc lib: sbi_scratch: Don't set hartid_to_scratch table for disabled HART
680b098 lib: sbi_hsm: Don't use sbi_platform_hart_count() API
db187d6 lib: sbi_hsm: Remove scratch parameter from hart_started_mask() API
814f38d lib: sbi_hsm: Don't use sbi_platform_hart_disabled() API
75eec9d lib: Don't use sbi_platform_hart_count() API
c51f02c include: sbi_platform: Introduce HART index to HART id table
315a877 platform: sifive/fu540: Remove FU540_ENABLED_HART_MASK option
a0c88dd lib: Fix sbi_ecall_register_extension to prevent extension IDs overlap
9a74a64 lib: Check MSIP bit after returning from WFI
5968894 platform: Move ariane standalone fpga project to its own project
ed265b4 platform: fpga/ariane: Remove redundant plic address macros
fb84879 platform: Add OpenPiton platform support
d1d6560 platform: fpga/common: Add a fdt parsing helper functions
040e4e2 lib: utils: Move fdt fixup helper routines to a different file
4c37451 platform: openpiton: Read the device configurations from device tree
4d93586 lib: prevent coldboot_lottery from overflowing
550ba88 scripts: Extend create-binary-archive.sh for unified binary tar ball
160c885 lib: utils: Improve fdt_cpu_fixup() implementation
1de66d1 lib: Optimize unpriv load/store implementation
626467c lib: Remove scratch parameter from unpriv load/store functions
cb78a48 lib: sbi_trap: Remove scratch parameter from sbi_trap_redirect()
d11c79c lib: sbi_emulate_csr: Remove scratch and hartid parameter
5a7bd0c lib: sbi_illegal_insn: Remove mcause, scratch and hartid parameters
fe37d7d lib: sbi_misaligned_ldst: Remove mcause, scratch and hartid parameters
7487116 lib: sbi_ecall: Remove mcause, scratch and hartid parameters
40b221b lib: sbi_trap: Simplify sbi_trap_handler() API
7b211ff include: sbi_platform: Remove priv parameter from hart_start() callback
5b6957e include: Use more consistent name for atomic xchg() and cmpxchg()
dd0f21c lib: sbi_scratch: Introduce sbi_scratch_last_hartid() API
54b2779 include: sbi_tlb: Remove scratch parameter from sbi_tlb_request()
9e52a45 include: sbi_ipi: Remove scratch parameter from most functions
ec0d80f include: sbi_system: Remove scratch parameter and redundant functions
0a28ea5 include: sbi_timer: Remove scratch parameter from most funcitons
648507a include: sbi_console: Remove scratch parameter from sbi_dprintf()
e5a7f55 platform: thead/c910: Use HSM extension to boot secondary cores
f281de8 lib: irqchip/plic: Fix maximum priority threshold value
6c7922e lib: Support vector extension
615587c docs: Update README about supported SBI versions
66d0184 lib: Allow overriding SBI implementation ID
9f1b72c include: Bump-up version to 0.7

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

linux-user/riscv: fix up struct target_ucontext definition

As struct target_ucontext will be transfered to signal handler, it
must keep pace with struct ucontext_t defined in Linux kernel.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200412020830.607-1-zhiwei_liu@c-sky.com
Message-Id: <20200412020830.607-1-zhiwei_liu@c-sky.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add a sifive-e34 cpu type

The sifive-e34 cpu type is the same as the sifive-e31 with the
single precision floating-point extension enabled.

Signed-off-by: Corey Wharton <coreyw7@fb.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20200313193429.8035-3-coreyw7@fb.com
Message-Id: <20200313193429.8035-3-coreyw7@fb.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

riscv: sifive_e: Support changing CPU type

Allows the CPU to be changed from the default via the -cpu command
line option.

Signed-off-by: Corey Wharton <coreyw7@fb.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313193429.8035-2-coreyw7@fb.com
Message-Id: <20200313193429.8035-2-coreyw7@fb.com>
[ Changes by AF:
 - Set "cpu-type" from the machine and not SoC
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: Generate correct "mmu-type" for 32-bit machines

32-bit machine should have its CPU's "mmu-type" set to "riscv,sv32".

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1583585319-26603-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <1583585319-26603-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

riscv: Fix Stage2 SV32 page table walk

As-per RISC-V H-Extension v0.5 draft, the Stage2 SV32 page table has
12bits of VPN[1] and 10bits of VPN[0]. The additional 2bits in VPN[1]
is required to handle the 34bit intermediate physical address coming
from Stage1 SV32 page table. The 12bits of VPN[1] implies that Stage2
SV32 level-0 page table will be 16KB in size with total 4096 enteries
where each entry maps 4MB of memory (same as Stage1 SV32 page table).

The get_physical_address() function is broken for Stage2 SV32 level-0
page table because it incorrectly computes output physical address for
Stage2 SV32 level-0 page table entry.

The root cause of the issue is that get_physical_address() uses the
"widened" variable to compute level-0 physical address mapping which
changes level-0 mapping size (instead of 4MB). We should use the
"widened" variable only for computing index of Stage2 SV32 level-0
page table.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200330082724.120444-1-anup.patel@wdc.com
Message-Id: <20200330082724.120444-1-anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

riscv: AND stage-1 and stage-2 protection flags

Take the result of stage-1 and stage-2 page table walks and AND the two
protection flags together. This way we require both to set permissions
instead of just stage-2.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Anup Patel <anup@brainfault.org>
Message-id: 846f1e18f5922d818bc464ec32c144ef314ec724.1585262586.git.alistair.francis@wdc.com
Message-Id: <846f1e18f5922d818bc464ec32c144ef314ec724.1585262586.git.alistair.francis@wdc.com>

riscv: Don't use stage-2 PTE lookup protection flags

When doing the fist of a two stage lookup (Hypervisor extensions) don't
set the current protection flags from the second stage lookup of the
base address PTE.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Anup Patel <anup@brainfault.org>
Message-id: 931db85d6890ed4bc2b527fd1011197cd28299aa.1585262586.git.alistair.francis@wdc.com
Message-Id: <931db85d6890ed4bc2b527fd1011197cd28299aa.1585262586.git.alistair.francis@wdc.com>

riscv/sifive_u: Add a serial property to the sifive_u machine

At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.

A new "serial" property is introduced to specify the board serial
number. When not given, the default serial number 1 is used.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com>
[ Changed by AF:
 - Use the SoC's serial property to pass the info to the SoC
 - Fixup commit title
 - Rebase on file restructuring
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

riscv/sifive_u: Add a serial property to the sifive_u SoC

At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.

A new "serial" property is introduced to the sifive_u SoC to specify
the board serial number. When not given, the default serial number
1 is used.

Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

riscv/sifive_u: Fix up file ordering

Split the file into clear machine and SoC sections.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2020-04-29' into staging

Miscellaneous patches for 2020-04-29

# gpg: Signature made Wed 29 Apr 2020 07:42:52 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2020-04-29: (32 commits)
  qemu-option: pass NULL rather than 0 to the id of qemu_opts_set()
  libqos: Give get_machine_allocator() internal linkage
  fuzz: Simplify how we compute available machines and types
  Makefile: Drop unused, broken target recurse-fuzz
  smbus: Fix spd_data_generate() for number of banks > 2
  bamboo, sam460ex: Tidy up error message for unsupported RAM size
  smbus: Fix spd_data_generate() error API violation
  sam460ex: Suppress useless warning on -m 32 and -m 64
  qga: Fix qmp_guest_suspend_{disk, ram}() error handling
  qga: Fix qmp_guest_get_memory_blocks() error handling
  tests/test-logging: Fix test for -dfilter 0..0xffffffffffffffff
  migration/colo: Fix qmp_xen_colo_do_checkpoint() error handling
  io: Fix qio_channel_socket_close() error handling
  xen/pt: Fix flawed conversion to realize()
  virtio-net: Fix duplex=... and speed=... error handling
  bochs-display: Fix vgamem=SIZE error handling
  fdc: Fix fallback=auto error handling
  arm/virt: Fix virt_machine_device_plug_cb() error API violation
  cpus: Proper range-checking for -icount shift=N
  cpus: Fix configure_icount() error API violation
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Open 5.1 development tree

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

s390x/s390-virtio-ccw: Fix build on systems without KVM

linux/kvm.h is not available on all platforms. Let us move
s390_machine_inject_pv_error into pv.c as it uses KVM structures.
Also rename the function to s390_pv_inject_reset_error.

While at it, ipl.h needs an include for "exec/address-spaces.h"
as it uses address_space_memory.

Fixes: c3347ed0d2ee ("s390x: protvirt: Support unpack facility")
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200406100158.5940-2-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/pv: Retry ioctls on -EINTR

PV_ENABLE (and maybe others) might return -EINTR when a signal is
pending. See the Linux kernel patch "s390/gmap: return proper error code
on ksm unsharing" for details. Let us retry the ioctl in that case.

Fixes: c3347ed0d2ee ("s390x: protvirt: Support unpack facility")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200327124616.34866-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: protvirt: Fix stray error_report_err in s390_machine_protect

In case the protection of the machine fails at s390_pv_vm_enable(),
we'll currently report the local_error variable. Problem is that
there's no migration blocker error that we can report at this point so
the pointer is always NULL which leads to a SEGFAULT.

Let's remove the error report.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: 0141e1b47707 ("s390x: protvirt: Add migration blocker")
Message-Id: <20200326140505.2432-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: Add unpack facility feature to GA1

The unpack facility is an indication that diagnose 308 subcodes 8-10
are available to the guest. That means, that the guest can put itself
into protected mode.

Once it is in protected mode, the hardware stops any attempt of VM
introspection by the hypervisor.

Some features are currently not supported in protected mode:
     * vfio devices
     * Migration
     * Huge page backings

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200319131921.2367-17-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

docs: system: Add protvirt docs

Let's add some documentation for the Protected VM functionality.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200319131921.2367-16-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>