Extending the tail can have some unexpected side effects if a program uses
a helper like BPF_FUNC_skb_pull_data to read partial content beyond the
head skb headlen when all the skbs in the gso frag_list are linear with no
head_frag -
kernel BUG at net/core/skbuff.c:4219!
pc : skb_segment+0xcf4/0xd2c
lr : skb_segment+0x63c/0xd2c
Call trace:
skb_segment+0xcf4/0xd2c
__udp_gso_segment+0xa4/0x544
udp4_ufo_fragment+0x184/0x1c0
inet_gso_segment+0x16c/0x3a4
skb_mac_gso_segment+0xd4/0x1b0
__skb_gso_segment+0xcc/0x12c
udp_rcv_segment+0x54/0x16c
udp_queue_rcv_skb+0x78/0x144
udp_unicast_rcv_skb+0x8c/0xa4
__udp4_lib_rcv+0x490/0x68c
udp_rcv+0x20/0x30
ip_protocol_deliver_rcu+0x1b0/0x33c
ip_local_deliver+0xd8/0x1f0
ip_rcv+0x98/0x1a4
deliver_ptype_list_skb+0x98/0x1ec
__netif_receive_skb_core+0x978/0xc60
Fix this by marking these skbs as GSO_DODGY so segmentation can handle
the tail updates accordingly.
Fixes: 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/1671084718-24796-1-git-send-email-quic_subashab@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The actual clock feeding into the Mali GPU on the MT8183 is from the
clock gate in the MFGCFG block, not CLK_TOP_MFGPLL_CK from the TOPCKGEN
block, which itself is simply a pass-through placeholder for the MFGPLL
in the APMIXEDSYS block.
Fix the hardware description with the correct clock reference.
Fixes: a8168cebf1bc ("arm64: dts: mt8183: Add node for the Mali GPU") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220927101128.44758-2-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Power reset maybe generate unexpected signal. In order to avoid
the glitch issue, we need to enable isolation first to guarantee the
stable signal when power reset is triggered.
Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains") Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221014102029.1162-1-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit mentioned below causes the ovs_flow_tbl_lookup() function
to be called with the masked key. However, it's supposed to be called
with the unmasked key. This due to the fact that the datapath supports
installing wider flows, and OVS relies on this behavior. For example
if ipv4(src=1.1.1.1/192.0.0.0, dst=1.1.1.2/192.0.0.0) exists, a wider
flow (smaller mask) of ipv4(src=192.1.1.1/128.0.0.0,dst=192.1.1.2/
128.0.0.0) is allowed to be added.
However, if we try to add a wildcard rule, the installation fails:
The reason is that the key used to determine if the flow is already
present in the system uses the original key ANDed with the mask.
This results in the IP address not being part of the (miniflow) key,
i.e., being substituted with an all-zero value. When doing the actual
lookup, this results in the key wrongfully matching the first flow,
and therefore the flow does not get installed.
This change reverses the commit below, but rather than having the key
on the stack, it's allocated.
Fixes: 190aa3e77880 ("openvswitch: Fix Frame-size larger than 1024 bytes warning.") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
$number + > bash means redirect FD $number, e.g. commonly
used 2> redirects stderr (fd 2). The test uses 8192> to
write the number 8192 to a file, this results in:
./devlink.sh: line 499: 8192: Bad file descriptor
Oddly the test also papers over this issue by checking
for failure (expecting an error rather than success)
so it passes, anyway.
Fixes: ff18176ad806 ("selftests: Add a test of large binary to devlink health test") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The default setting of end_time minus start_time is whole 1 second.
Thus, if it's not being configured in any GCL entry then it will be
staying at original 1 second.
This patch is changing the start_time and end_time to be end_time as
if setting zero will be having weird HW behavior where the gate will
not be fully closed.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 72abeedd8398 ("igc: Set Qbv start_time and end_time to end_time if not being configured in GCL") Signed-off-by: Sasha Levin <sashal@kernel.org>
Qbv users can specify a cycle time that is not equal to the total GCL
intervals. Hence, recalculation is necessary here to exclude the time
interval that exceeds the cycle time. As those GCL which exceeds the
cycle time will be truncated.
According to IEEE Std. 802.1Q-2018 section 8.6.9.2, once the end of
the list is reached, it will switch to the END_OF_CYCLE state and
leave the gates in the same state until the next cycle is started.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Introduce qbv_enable flag in igc_adapter struct to store the Qbv on/off.
So this allow the BaseTime to enroll with zero value.
Fixes: 61572d5f8f91 ("igc: Simplify TSN flags handling") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Using the tc qdisc command, the user can set basetime to any value.
Checking should be done on the driver's side to prevent registering
basetime values that are less than zero.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The I225 hardware has a limitation that packets can only be scheduled
in the [0, cycle-time] interval. So, scheduling a packet to the start
of the next cycle doesn't usually work.
To overcome this, we use the Transmit Descriptor first flag to indicates
that a packet should be the first packet (from a queue) in a cycle
according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle
in Intel Discrete I225/6 User Manual.
But this only works if there was any packet from that queue during the
current cycle, to avoid this issue, we issue an empty packet if that's
not the case. Also require one more descriptor to be available, to take
into account the empty packet that might be issued.
Test Setup:
Talker: Use l2_tai to generate the launchtime into packet load.
Listener: Use timedump.c to compute the delta between packet arrival
and LaunchTime packet payload.
The problem occurs in probe process as follows:
r6040_init_one:
mdiobus_register
mdiobus_scan <- alloc and register phy_device,
the reference count of phy_device is 3
r6040_mii_probe
phy_connect <- connect to the first phy_device,
so the reference count of the first
phy_device is 4, others are 3
register_netdev <- fault inject succeeded, goto error handling path
// error handling path
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
mdiobus_free(lp->mii_bus); <- the reference count of the first
phy_device is 1, it is not released
and other phy_devices are released
// similarly, the remove process also has the same problem
The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.
Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully.
Fixes: 3831861b4ad8 ("r6040: implement phylib") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221213125614.927754-1-lizetao1@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a race resulting in alive SOCK_SEQPACKET socket
may change its state from TCP_ESTABLISHED to TCP_CLOSE:
unix_release_sock(peer) unix_dgram_sendmsg(sk)
sock_orphan(peer)
sock_set_flag(peer, SOCK_DEAD)
sock_alloc_send_pskb()
if !(sk->sk_shutdown & SEND_SHUTDOWN)
OK
if sock_flag(peer, SOCK_DEAD)
sk->sk_state = TCP_CLOSE
sk->sk_shutdown = SHUTDOWN_MASK
After that socket sk remains almost normal: it is able to connect, listen, accept
and recvmsg, while it can't sendmsg.
Since this is the only possibility for alive SOCK_SEQPACKET to change
the state in such way, we should better fix this strange and potentially
danger corner case.
Note, that we will return EPIPE here like this is normally done in sock_alloc_send_pskb().
Originally used ECONNREFUSED looks strange, since it's strange to return
a specific retval in dependence of race in kernel, when user can't affect on this.
Also, move TCP_CLOSE assignment for SOCK_DGRAM sockets under state lock
to fix race with unix_dgram_connect():
Fix a slab-out-of-bounds read that occurs in nla_put() called from
nfc_genl_send_target() when target->sensb_res_len, which is duplicated
from an nfc_target in pn533, is too large as the nfc_target is not
properly initialized and retains garbage values. Clear nfc_targets with
memset() before they are used.
Fixes: 673088fb42d0 ("NFC: pn533: Send ATR_REQ directly for active device detection") Fixes: 361f3cb7f9cf ("NFC: DEP link hook implementation for pn533") Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221214015139.119673-1-linuxlovemin@yonsei.ac.kr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before enetc_clean_rx_ring_xdp() calls xdp_do_redirect(), each software
BD in the RX ring between index orig_i and i can have one of 2 refcount
values on its page.
We are the owner of the current buffer that is being processed, so the
refcount will be at least 1.
If the current owner of the buffer at the diametrically opposed index
in the RX ring (i.o.w, the other half of this page) has not yet called
kfree(), this page's refcount could even be 2.
enetc_page_reusable() in enetc_flip_rx_buff() tests for the page
refcount against 1, and [ if it's 2 ] does not attempt to reuse it.
But if enetc_flip_rx_buff() is put after the xdp_do_redirect() call,
the page refcount can have one of 3 values. It can also be 0, if there
is no owner of the other page half, and xdp_do_redirect() for this
buffer ran so far that it triggered a flush of the devmap/cpumap bulk
queue, and the consumers of those bulk queues also freed the buffer,
all by the time xdp_do_redirect() returns the execution back to enetc.
This is the reason why enetc_flip_rx_buff() is called before
xdp_do_redirect(), but there is a big flaw with that reasoning:
enetc_flip_rx_buff() will set rx_swbd->page = NULL on both sides of the
enetc_page_reusable() branch, and if xdp_do_redirect() returns an error,
we call enetc_xdp_free(), which does not deal gracefully with that.
In fact, what happens is quite special. The page refcounts start as 1.
enetc_flip_rx_buff() figures they're reusable, transfers these
rx_swbd->page pointers to a different rx_swbd in enetc_reuse_page(), and
bumps the refcount to 2. When xdp_do_redirect() later returns an error,
we call the no-op enetc_xdp_free(), but we still haven't lost the
reference to that page. A copy of it is still at rx_ring->next_to_alloc,
but that has refcount 2 (and there are no concurrent owners of it in
flight, to drop the refcount). What really kills the system is when
we'll flip the rx_swbd->page the second time around. With an updated
refcount of 2, the page will not be reusable and we'll really leak it.
Then enetc_new_page() will have to allocate more pages, which will then
eventually leak again on further errors from xdp_do_redirect().
The problem, summarized, is that we zeroize rx_swbd->page before we're
completely done with it, and this makes it impossible for the error path
to do something with it.
Since the packet is potentially multi-buffer and therefore the
rx_swbd->page is potentially an array, manual passing of the old
pointers between enetc_flip_rx_buff() and enetc_xdp_free() is a bit
difficult.
For the sake of going with a simple solution, we accept the possibility
of racing with xdp_do_redirect(), and we move the flip procedure to
execute only on the redirect success path. By racing, I mean that the
page may be deemed as not reusable by enetc (having a refcount of 0),
but there will be no leak in that case, either.
Once we accept that, we have something better to do with buffers on
XDP_REDIRECT failure. Since we haven't performed half-page flipping yet,
we won't, either (and this way, we can avoid enetc_xdp_free()
completely, which gives the entire page to the slab allocator).
Instead, we'll call enetc_xdp_drop(), which will recycle this half of
the buffer back to the RX ring.
Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT") Suggested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20221213001908.2347046-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3bc5e683c67d ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic.
Fixes: 3bc5e683c67d ("bfq: Split shared queues on move between cgroups") Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221214030430.3304151-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
skb_queue_purge() is called under spin_lock_irqsave() in handle_dmsg()
and hfcm_l1callback(), kfree_skb() is called in them, to fix this, use
skb_queue_splice_init() to move the dch->squeue to a free queue, also
enqueue the tx_skb and rx_skb, at last calling __skb_queue_purge() to
free the SKBs afer unlock.
Fixes: af69fb3a8ffa ("Add mISDN HFC multiport driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
skb_queue_purge() is called under spin_lock_irqsave() in hfcpci_l2l1D(),
kfree_skb() is called in it, to fix this, use skb_queue_splice_init()
to move the dch->squeue to a free queue, also enqueue the tx_skb and
rx_skb, at last calling __skb_queue_purge() to free the SKBs afer unlock.
Fixes: 1700fe1a10dc ("Add mISDN HFC PCI driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
skb_queue_purge() is called under spin_lock_irqsave() in hfcusb_l2l1D(),
kfree_skb() is called in it, to fix this, use skb_queue_splice_init()
to move the dch->squeue to a free queue, also enqueue the tx_skb and
rx_skb, at last calling __skb_queue_purge() to free the SKBs afer unlock.
In tx_iso_complete(), dev_kfree_skb() is called to consume the transmitted
SKB, so replace it with dev_consume_skb_irq().
Fixes: 69f52adb2d53 ("mISDN: Add HFC USB driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently macsec offload selection update routine accesses
the net device prior to holding the relevant lock.
Fix by holding the lock prior to the device access.
Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On error situation `clp->cl_cb_conn.cb_xprt` should not be given
a reference to the xprt otherwise both client cleanup and the
error handling path of the caller call to put it. Better to
delay handing over the reference to a later branch.
The pic32_rtc_enable(pdata, 0) and clk_disable_unprepare(pdata->clk)
should be called in the error handling of devm_rtc_allocate_device(),
so we should move devm_rtc_allocate_device earlier in pic32_rtc_probe()
to fix it.
In case of error, the function devm_regmap_init_i2c() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221125073626.1868229-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Maintaining a local driver data structure that is never shared
outside of the core device is an unnecessary complexity. Half of the
attributes were not used outside of a single function, one of which
was not used at all. The remaining 2 are generic and can be passed
around as required.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stable-dep-of: 14f8c55d48e0 ("mfd: pm8008: Fix return value check in pm8008_probe()") Signed-off-by: Sasha Levin <sashal@kernel.org>
rtas-error-log-max is not the name of an RTAS function, so rtas_token()
is not the appropriate API for retrieving its value. We already have
rtas_get_error_log_max() which returns a sensible value if the property
is absent for any reason, so use that instead.
Fixes: 8d633291b4fc ("powerpc/eeh: pseries platform EEH error log retrieval") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop no-longer possible error handling as noticed by ajd] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221118150751.469393-6-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may
fail and return NULL. devm_ioremap() will use res->start as input, which
may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221125021641.29392-1-shangxiaojing@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it.
According to MT7622 Reference Manual for Development Board v1.0 the PWM
unit found in the MT7622 SoC also comes with the PWM_CK_26M_SEL register
at offset 0x210 just like other modern MediaTek ARM64 SoCs.
And also MT7622 sets that register to 0x00000001 on reset which is
described as 'Select 26M fix CLK as BCLK' in the datasheet.
Hence set has_ck_26m_sel to true also for MT7622 which results in the
driver writing 0 to the PWM_CK_26M_SEL register which is described as
'Select bus CLK as BCLK'.
Fixes: 0c0ead76235db0 ("pwm: mediatek: Always use bus clock") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/Y1iF2slvSblf6bYK@makrotopia.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the original mtk_disp_pwm_get_state() function wrongly uses bit 0 of
CON0 to judge if the PWM is enabled.
However that is indicated by a bit (at a machine dependent position) in
the DISP_PWM_EN register. Fix this accordingly.
Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()") Signed-off-by: xinlei lee <xinlei.lee@mediatek.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/1666172538-11652-1-git-send-email-xinlei.lee@mediatek.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As was documented in commit 0f02f491b786 ("pwm: sifive: Reduce time the
controller lock is held") a caller of pwm_sifive_update_clock() must
hold the mutex. So fix pwm_sifive_clock_notifier() to grab the lock.
While this necessity was only documented later, the race exists since
the driver was introduced.
Fixes: 9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM") Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20221018061656.1428111-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver treats IOMMU_DOMAIN_IDENTITY the same as UNMANAGED, which
cannot possibly be correct.
UNMANAGED domains are required to start out blocking all DMAs. This seems
to be what this driver does as it allocates a first level 'dt' for the IO
page table that is 0 filled.
Thus UNMANAGED looks like a working IO page table, and so IDENTITY must be
a mistake. Remove it.
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c904b ("selftests/powerpc: Add test for all DSCR sysfs interfaces") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpci events were deprecated for platform firmware that
supports counter_info_version 0x8 or above.
Fix the hv_gpci event list by adding a new attribute group
called "hv_gpci_event_attrs_v6" and a "ENABLE_EVENTS_COUNTERINFO_V6"
macro to enable these events for platform firmware
that supports counter_info_version 0x6 or below. And assigning
the hv_gpci event list based on output counter info version
of underlying plaform.
If platform_device_add() is not called or failed, it can not call
platform_device_del() to clean up memory, it should call
platform_device_put() in error case.
Fixes: 26f6cb999366 ("[POWERPC] fsl_soc: add support for fsl_spi") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The interrupt frame detection and loads from the hypothetical pt_regs
are not bounds-checked. The next-frame validation only bounds-checks
STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another
test for this.
The user could set r1 to be equal to the address matching the first
interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page
due to the kernel redzone, and induce the kernel to load the marker from
there. Possibly this could cause a crash at least. If the user could
induce the previous page to contain a valid marker, then it might be
able to direct perf to read specific memory addresses in a way that
could be transmitted back to the user in the perf data.
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
1529 | int mode;
| ^~~~
Fixes: 09b6c1129f89 ("powerpc/xmon: Fix compile error with PPC_8xx=y") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work Signed-off-by: Sasha Levin <sashal@kernel.org>
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
This function only calls of_node_put() in normal path,
missing it in the error path.
Add missing of_node_put() to avoid refcount leak.
Fixes: f24be42aab37 ("cxl: Add psl9 specific code") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220605060038.62217-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.
macio device is freed in macio_release_dev(), so the kfree() can be
removed.
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221104032551.1075335-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The fsl_pamu_probe() returns directly when create_csd() failed, leaving
irq and memories unreleased.
Fix by jumping to error if create_csd() returns error.
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it before returning from ppr_notifier()
to avoid refcount leak.
If the alarms are disabled the topmost bit (AEN_*) is set in the alarm
registers. This is also interpreted in BCD number leading to this warning:
rtc rtc0: invalid alarm value: 2022-09-21T80:80:80
Fix this by masking alarm enabling and reserved bits.
On an iMX6ULL the following message appears when a wakealarm is set:
echo 0 > /sys/class/rtc/rtc1/wakealarm
rtc rtc1: Timeout trying to get valid LPSRT Counter read
This does not always happen but is reproducible quite often (7 out of 10
times). The problem appears because the iMX6ULL is not able to read the
registers within one 32kHz clock cycle which is the base clock of the
RTC. Therefore, this patch allows a difference of up to 320 cycles
(10ms). 10ms was chosen to be big enough even on systems with less cpu
power (e.g. iMX6ULL). According to the reference manual a difference is
fine:
- If the two consecutive reads are similar, the value is correct.
The values have to be similar, not equal.
Fixes: cd7f3a249dbe ("rtc: snvs: Add timeouts to avoid kernel lockups") Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco@dolcini.it> Link: https://lore.kernel.org/r/20221106115915.7930-1-francesco@dolcini.it Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make cmos_do_remove() drop the ACPI RTC fixed event handler so as to
prevent it from operating on stale data in case the event triggers
after driver removal.
Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/2224609.iZASKD2KPV@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The names of rtc_wake_setup() and cmos_wake_setup() don't indicate
that these functions are ACPI-related, which is the case, and the
former doesn't really reflect the role of the function.
Rename them to acpi_rtc_event_setup() and acpi_cmos_wake_setup(),
respectively, to address this shortcoming.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/3225614.44csPzL39Z@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal") Signed-off-by: Sasha Levin <sashal@kernel.org>
Reorder the ACPI-related code before cmos_do_probe() so as to eliminate
excessive forward declarations of some functions.
While at it, for consistency, add the inline modifier to the
definitions of empty stub static funtions and remove it from the
corresponding definitions of functions with non-empty bodies.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/13157911.uLZWGnKmhe@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal") Signed-off-by: Sasha Levin <sashal@kernel.org>
Notice that cmos_wake_setup() is the only user of acpi_rtc_info and it
can operate on the cmos_rtc variable directly, so it need not set the
platform_data pointer before cmos_do_probe() is called. Instead, it
can be called by cmos_do_probe() in the case when the platform_data
pointer is not set to implement the default behavior (which is to use
the FADT information as long as ACPI support is enabled).
Modify the code accordingly.
While at it, drop a comment that doesn't really match the code it is
supposed to be describing.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/4803444.31r3eYUQgx@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration
ordering issue") overlooked the fact that cmos_do_probe() depended
on the preparations carried out by cmos_wake_setup() and the wake
alarm stopped working after the ordering of them had been changed.
Address this by partially reverting commit 4919d3eb2ec0 so that
cmos_wake_setup() is called before cmos_do_probe() again and moving
the rtc_wake_setup() invocation from cmos_wake_setup() directly to the
callers of cmos_do_probe() where it will happen after a successful
completion of the latter.
Because acpi_install_fixed_event_handler() enables the event
automatically on success, it is incorrect to call it before the
handler routine passed to it is ready to handle events.
Unfortunately, the rtc-cmos driver does exactly the incorrect thing
by calling cmos_wake_setup(), which passes rtc_handler() to
acpi_install_fixed_event_handler(), before cmos_do_probe(), because
rtc_handler() uses dev_get_drvdata() to get to the cmos object
pointer and the driver data pointer is only populated in
cmos_do_probe().
This leads to a NULL pointer dereference in rtc_handler() on boot
if the RTC fixed event happens to be active at the init time.
To address this issue, change the initialization ordering of the
driver so that cmos_wake_setup() is always called after a successful
cmos_do_probe() call.
While at it, change cmos_pnp_probe() to call cmos_do_probe() after
the initial if () statement used for computing the IRQ argument to
be passed to cmos_do_probe() which is cleaner than calling it in
each branch of that if () (local variable "irq" can be of type int,
because it is passed to that function as an argument of type int).
Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check
ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number
of systems, because previously it only affected systems with
ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that
commit.
Fixes: 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") Fixes: a474aaedac99 ("rtc-cmos: move wake setup from ACPI glue into RTC driver") Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/ Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal") Signed-off-by: Sasha Levin <sashal@kernel.org>
The ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to
use low-power S0 idle on the given platform than S3 (provided that
the latter is supported) and it doesn't preclude using either of
them (which of them will be used depends on the choices made by user
space).
For this reason, there is no benefit from checking that flag in
use_acpi_alarm_quirks().
First off, it cannot be a bug to do S3 with use_acpi_alarm set,
because S3 can be used on systems with ACPI_FADT_LOW_POWER_S0 and it
must work if really supported, so the ACPI_FADT_LOW_POWER_S0 check is
not needed to protect the S3-capable systems from failing.
Second, suspend-to-idle can be carried out on a system with
ACPI_FADT_LOW_POWER_S0 unset and it is expected to work, so if setting
use_acpi_alarm is needed to handle that case correctly, it should be
set regardless of the ACPI_FADT_LOW_POWER_S0 value.
Accordingly, drop the ACPI_FADT_LOW_POWER_S0 check from
use_acpi_alarm_quirks().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/12054246.O9o76ZdvQC@kreacher
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal") Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzbot reports an out of bound access in ntfs_trim_fs.
The cause of this is using a loop termination condition that compares
window index (iw) with wnd->nbits instead of wnd->nwnd, due to which the
index used for wnd->free_bits exceeds the size of the array allocated.
The above calculation may lead to rounding errors because the
NSEC_PER_SEC is divided by 'period_ns' before applying the
PWM_DUTY_WIDTH multiplication factor. For example, if the period is
45334ns, the above calculation yields a rate of 5646848Hz instead of
5646976Hz. Fix this by applying the multiplication factor before
dividing and using the DIV_ROUND_UP macro which yields the expected
result of 5646976Hz.
Fixes: 1d7796bdb63a ("pwm: tegra: Support dynamic clock frequency configuration") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit bc27fb68aaad ("include/uapi/linux/byteorder, swab: force inlining
of some byteswap operations") added __always_inline to swab functions
and commit 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to
userspace headers") added a definition of __always_inline for use in
exported headers when the kernel's compiler.h is not available.
However, since swab.h does not include stddef.h, if the header soup does
not indirectly include it, the definition of __always_inline is missing,
resulting in a compilation failure, which was observed compiling the
perf tool using exported headers containing this commit:
In file included from /usr/include/linux/byteorder/little_endian.h:12:0,
from /usr/include/asm/byteorder.h:14,
from tools/include/uapi/linux/perf_event.h:20,
from perf.h:8,
from builtin-bench.c:18:
/usr/include/linux/swab.h:160:8: error: unknown type name `__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
Fix this by replacing the inclusion of linux/compiler.h with
linux/stddef.h to ensure that we pick up that definition if required,
without relying on it's indirect inclusion. compiler.h is then included
indirectly, via stddef.h.
Fixes: 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to userspace headers") Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Petr Vaněk <arkamar@atlas.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The PHY's "wakeup_count" is not incrementing when waking from
WoL. The wakeup count can be found in sysfs at:
/sys/bus/platform/devices/rdb/*.usb-phy/power/wakeup_count.
The problem is that the system wakup event handler was being passed
the wrong "device" by the PHY driver.
As pointed out in the corresponding downstream fix [0], the permission bits
of the page table entries are compatible between v1 and v2 of the IOMMU.
This is in contrast to the current mainline code that incorrectly assumes
that the read and write permission bits are switched. Fix the permission
bits by reusing the v1 bit defines.
Because driver has enum type permissions and iommu subsystem has bitmap
type, we have to be careful how check for combined read and write
permissions is done. In such case, we have to mask both permissions and
check that both are set at the same time.
Current code just masks both flags but doesn't check that both are set.
In short, it always sets R/W permission, regardles if requested
permissions were RO, WO or RW. Fix that.
We have to reset masters for all faults - permissions, L1 fault or L2
fault. Currently it's done only for permissions. If other type of fault
happens, master is in locked up state. Fix that by really considering
all fault sources.
Reset signal is asserted by writing 0 to the corresponding locations of
masters we want to reset. So in order to deassert all reset signals, we
should write 1's to all locations.
Current code writes 1's to locations of masters which were just reset
which is good. However, at the same time it also writes 0's to other
locations and thus asserts reset signals of remaining masters. Fix code
by writing all 1's when we want to deassert all reset signals.
This bug was discovered when working with Cedrus (video decoder). When
it faulted, display went blank due to reset signal assertion.
In order to perform more open-coded replacements of common allocation
size arithmetic, the kernel needs saturating (SIZE_MAX) helpers for
multiplication, addition, and subtraction. For example, it is common in
allocators, especially on realloc, to add to an existing size:
p = krealloc(map->patch,
sizeof(struct reg_sequence) * (map->patch_regs + num_regs),
GFP_KERNEL);
There is no existing saturating replacement for this calculation, and
just leaving the addition open coded inside array_size() could
potentially overflow as well. For example, an overflow in an expression
for a size_t argument might wrap to zero:
Introduce size_mul(), size_add(), and size_sub() helpers that
implicitly promote arguments to size_t and saturated calculations for
use in allocations. With these helpers it is also possible to redefine
array_size(), array3_size(), flex_array_size(), and struct_size() in
terms of the new helpers.
As with the check_*_overflow() helpers, the new helpers use __must_check,
though what is really desired is a way to make sure that assignment is
only to a size_t lvalue. Without this, it's still possible to introduce
overflow/underflow via type conversion (i.e. from size_t to int).
Enforcing this will currently need to be left to static analysis or
future use of -Wconversion.
Additionally update the overflow unit tests to force runtime evaluation
for the pathological cases.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Keith Busch <kbusch@kernel.org> Cc: Len Baker <len.baker@gmx.com> Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: e001e6086939 ("fs/ntfs3: Harden against integer overflows") Signed-off-by: Sasha Levin <sashal@kernel.org>
The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:
drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
32 | return virt_to_page((void *)paddr);
| ^
Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.
Fixes: 0d1b756acf60 ("RDMA/siw: Pass a pointer to virt_to_page()") Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The -D/--delay option is to delay the measure after the program starts.
But the current code goes to sleep before starting the program so the
program is delayed too. This is not the intention, let's fix it.
Before:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
It ran the workload for 4 seconds and gave the 3 second delay. So it
should skip the first 3 second and measure the last 1 second only. But
as you can see, it delays 3 seconds and ran the workload after that for
4 seconds. So the total time (real) was 7 seconds.
After:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
The bug was introduced when it changed enablement of system-wide events
with a command line workload. But it should've considered the initial
delay case. The code was reworked since then (in bb8bc52e7578) so I'm
afraid it won't be applied cleanly.
Fixes: d0a0a511493d2695 ("perf stat: Fix forked applications enablement of counters") Reported-by: Kevin Nomura <nomurak@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Link: https://lore.kernel.org/r/20221212230820.901382-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This extracts common code from the branches of the forks if-then-else.
enable_counters(), which was at the beginning of both branches of the
conditional, is now unconditional; evlist__start_workload() is extracted
to a different if, which enables making the common clocking code
unconditional.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Adrián Herrera Arcila <adrian.herrera@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/r/20220729161244.10522-1-adrian.herrera@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: c587e77e100f ("perf stat: Do not delay the workload with --delay") Signed-off-by: Sasha Levin <sashal@kernel.org>
when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.
So return ENOMEM if kasprintf() return NULL pointer.
Fixes: 3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table") Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ab8500_charger_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
all ab8500_charger_component_drivers are not unregistered.
Fix by unregister ab8500_charger_component_drivers when
platform_driver_register() failed.
Fixes: 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ssi_init() returns the platform_driver_register() directly without
checking its return value, if platform_driver_register() failed, the
ssi_pdriver is not unregistered.
Fix by unregister ssi_pdriver when the last platform_driver_register()
failed.
Fixes: 0fae198988b8 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If devm_gpiod_get_optional() returns error, the charger should be
freed before z2_batt_probe returns according to the context. We
fix it by just gotoing to 'err' branch.
perf doesn't provide proper symbol information for specially crafted
.debug files.
Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.
Example: program header of text section of libxxx.so:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
0x000000000055ae80 0x000000000055ae80 R E 0x1000
Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug
LOAD 0x0000000000001000 0x00000000003d3000 0x00000000003d3000
0x0000000000000000 0x000000000055ae80 R E 0x1000
Offset and FileSiz have been changed.
Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):
sym.st_value -= phdr.p_vaddr - phdr.p_offset;
Correct program header information is located inside runtime ELF
file (runtime_ss).
Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Signed-off-by: Ajay Kaher <akaher@vmware.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Makhalov <amakhalov@vmware.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsab@vmware.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com> Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On Arm64 a case is perf tools fails to find the corresponding trace
point folder for system calls listed in the table 'syscalltbl_arm64',
e.g. the generated system call table contains "lookup_dcookie" but we
cannot find out the matched trace point folder for it.
We need to figure out if there have any issue for the generated system
call table, on the other hand, we need to handle the case when trace
point folder is missed under sysfs, this patch sets the flag
syscall::nonexistent as true and returns the error from
trace__read_syscall_info().
Another problem is for trace__syscall_info(), it returns two different
values if a system call doesn't exist: at the first time calling
trace__syscall_info() it returns NULL when the system call doesn't exist,
later if call trace__syscall_info() again for the same missed system
call, it returns pointer of syscall. trace__syscall_info() checks the
condition 'syscalls.table[id].name == NULL', but the name will be
assigned in the first invoking even the system call is not found.
So checking system call's name in trace__syscall_info() is not the right
thing to do, this patch simply checks flag syscall::nonexistent to make
decision if a system call exists or not, finally trace__syscall_info()
returns the consistent result (NULL) if a system call doesn't existed.
Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221121075237.127706-4-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch defines a macro RAW_SYSCALL_ARGS_NUM to replace the open
coded number '6'.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20221121075237.127706-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 03e9a5d8eb55 ("perf trace: Handle failure when trace point folder is missed") Signed-off-by: Sasha Levin <sashal@kernel.org>
When a system call is not detected, the reason is either because the
system call ID is out of scope or failure to find the corresponding path
in the sysfs, trace__read_syscall_info() returns zero. Finally, without
returning an error value it introduces confusion for the caller.
This patch lets the function trace__read_syscall_info() to return
-EEXIST when a system call doesn't exist.
Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221121075237.127706-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If device_add() succeeds, we should call device_del() when want to
get rid of it, so move it into proper jump symbol.
Otherwise, when __power_supply_register() returns fail and goto
wakeup_init_failed to exit, there is still residue device file in sysfs.
When attempt to probe device again, sysfs would complain as below:
If ssi_add_controller() returns error, it should call hsi_put_controller()
to give up the reference that was set in hsi_alloc_controller(), so that
it can call hsi_controller_release() to free controller and ports that
allocated in hsi_alloc_controller().
Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If an error occurs after a successful uvesafb_init_mtrr() call, it must be
undone by a corresponding arch_phys_wc_del() call, as already done in the
remove function.
This has been added in the remove function in commit 63e28a7a5ffc
("uvesafb: Clean up MTRR code")
The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Weinberger <richard@nod.at> Cc: linux-um@lists.infradead.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Michal Januszewski <spock@gentoo.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7:0,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Weinberger <richard@nod.at> Cc: linux-um@lists.infradead.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Andres Salomon <dilinger@queued.net> Cc: linux-geode@lists.infradead.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
pci_get_device() will increase the reference count for the returned
pci_dev. For the error path, we need to use pci_dev_put() to decrease
the reference count.
projects / linux.git / log