meson: switch function tests from compilation to linking

Some tests for glibc functions cause compilation to emit warnings but
still succeed even if the function is not there.  Therefore, change
from cc.compiles to cc.links.

Reported-by: Richard Zak <richard.j.zak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vl: fix leak of qdict_crumple return value

Coverity reports that qemu_parse_config_group is returning without
unrefing the "crumpled" dictionary in case its top level item is a
list.  But actually the contract with qemu_record_config_group is
the same as for qemu_parse_config_group itself: if those function
need to stash the dictionary they get, they have to take a reference
themselves (currently this is never the case for either function).
Therefore, just add an unconditional qobject_unref(crumpled) to
qemu_parse_config_group.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: fix exceptions for MOV to DR

Use raise_exception_ra (without error code) when raising the illegal
opcode operation; raise #GP when setting bits 63:32 of DR6 or DR7.

Move helper_get_dr to sysemu/ since it is a privileged instruction
that is not needed on user-mode emulators.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Added DR6 and DR7 consistency checks

DR6[63:32] and DR7[63:32] are reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)

Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-3-laramglazier@gmail.com>
[Ignore for 32-bit builds. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Added MSRPM and IOPM size check

The address of the last entry in the MSRPM and
in the IOPM must be smaller than the largest physical address.
(APM2 15.10-15.11)

Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically

One more little step towards modular tcg ...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-35-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

usb: build usb-host as module

Drop one more shared library dependency (libusb) from core qemu.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-34-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

monitor/usb: register 'info usbhost' dynamically

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-33-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

usb: drop usb_host_dev_is_scsi_storage hook

Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway.  Also set it for emulated storage devices,
for consistency.  Add an inline helper function to check the flag.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-32-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

monitor: allow register hmp commands

Allow commands having a NULL cmd pointer, add a function to set the
pointer later.  Use case: allow modules implement hmp commands.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-31-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

accel: build tcg modular

Build tcg accel ops as module.
Which is only a small fraction of tcg.
Also only x86 for now.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-30-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

accel: add tcg module annotations

Add module annotations for tcg so autoloading works.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-29-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

accel: build qtest modular

Allow building accelerators as module.
Start with qtest as first user.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-28-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

accel: add qtest module annotations

Add module annotations for qtest so autoloading works.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-27-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

accel: autoload modules

Call module_object_class_by_name() instead of object_class_by_name()
for objects possibly implemented as module

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-26-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: hook up modules.h to docs build

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-25-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add module_obj() note to QOM docs

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-23-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add documentation for module sourcesets

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-22-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: target-specific module build infrastructure

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-21-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: check arch on qom lookup

With target-specific modules we can have multiple modules implementing
the same object.  Therefore we have to check the target arch on lookup
to find the correct module.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-20-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: check arch and block load on mismatch

Add module_allow_arch() to set the target architecture.
In case a module is limited to some arch verify arches
match and ignore the module if not.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-19-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add tracepoints

One for module load and one for qom type lookup.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-18-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: use modinfo for qemu opts load

Use module database to figure which module adds given QemuOpts group.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-17-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: use modinfo for qom load

Use module database to figure which module implements a given QOM type.
Drop hard-coded object list.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-16-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: use modinfo for dependencies

Use module database for module dependencies.
Drop hard-coded dependency list.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-15-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add block module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-14-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add s390x module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-13-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add ui module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-12-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add ccid module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-11-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add usb-redir module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-10-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add audio module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-9-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add chardev module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-8-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add virtio-gpu module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-7-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add qxl module annotations

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-6-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: check if all dependencies can be satisfied

Verifies if all dependencies are correctly listed in the modinfo.c too
and stop the builds if they're not.

Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-5-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: generate modinfo.c

Add script to generate C source with a small
database containing the module meta-data.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-4-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: collect module meta-data

Add script to collect the module meta-data from the source code,
store the results in *.modinfo files.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-3-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

modules: add modinfo macros

Add macros for module info annotations.

Instead of having that module meta-data stored in lists in util/module.c
place directly in the module source code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-2-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

osdep: fix HAVE_BROKEN_SIZE_MAX case

While config-host.mak entries are expanded to "1" for compatibility with
create-config.sh, tests done directly in meson.build expand to the empty
string and cannot be placed to the right of the && operator.  Adjust
osdep.h after commit e46bd55d9c ("configure: convert HAVE_BROKEN_SIZE_MAX
to meson", 2021-07-06) changed the way HAVE_BROKEN_SIZE_MAX is defined.

Reported-by: Frederic Bezies <fredbezies@gmail.com>
Fixes: e46bd55d9c ("configure: convert HAVE_BROKEN_SIZE_MAX to meson", 2021-07-06)
Resolves: #463
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: fix missing preprocessor symbols

While most libraries do not need a CONFIG_* symbol because the
"when:" clauses are enough, some do.  Add them back or stop
using them if possible.

In the case of libpmem, the statement to add the CONFIG_* symbol
was still in configure, but could not be triggered because it
checked for "no" instead of "disabled" (and it would be wrong anyway
since the test for the library has not been done yet).

Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 587d59d6cc ("configure, meson: convert virgl detection to meson", 2021-07-06)
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Fixes: 53c22b68e3 ("configure, meson: convert liburing detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: fix libpmem configuration option

For some reason, libpmem option setting was set to work in an opposite
way (--enable-libpmem disabled it and vice versa). Fixing this so
configuration works properly.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210707075144.82717-1-mrezanin@redhat.com>
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: fix libdaxctl options

For some reason, libdaxctl option setting was set to work in an opposite
way (--enable-libdaxctl disabled it and vice versa). Fixing this so
configuration works properly.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707063124.81954-1-mrezanin@redhat.com>
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: bugfixes, improvements

vhost-user-rng support.
Fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 07 Jul 2021 14:29:30 BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  MAINTAINERS: Add maintainer for vhost-user RNG implementation
  docs: add slot when adding new PCIe root port
  acpi/ged: fix reset cause
  tests: acpi: pc: update expected DSDT blobs
  acpi: pc: revert back to v5.2 PCI slot enumeration
  tests: acpi: prepare for changing DSDT tables
  migration: failover: reset partially_hotplugged
  virtio-pci: Changed return values for "notify", "device" and "isr" read.
  virtio-pci: Added check for virtio device in PCI config cbs.
  virtio-pci: Added check for virtio device presence in mm callbacks.
  hw/pci-host/q35: Ignore write of reserved PCIEXBAR LENGTH field
  virtio: Clarify MR transaction optimization
  virtio: disable ioeventfd for record/replay

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Thu 08 Jul 2021 14:11:37 BST
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/block-pull-request:
  block/io: Merge discard request alignments
  block: Add backend_defaults property
  block/file-posix: Optimize for macOS
  util/async: print leaked BH name when AioContext finalizes
  util/async: add a human-readable name to BHs for debugging

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-6.1-pull-request' into staging

linux-user pull request 20210708

Code and style cleanup
Add ppid in self/stat
ELF_HWCAP for RISC-V

# gpg: Signature made Thu 08 Jul 2021 11:07:31 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-6.1-pull-request:
  linux-user/syscall: Remove hardcoded tabs (code style)
  linux-user/alpha: Remove hardcoded tabs (code style)
  linux-user/mips: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
  linux-user/hppa: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
  linux-user/alpha: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN
  linux-user: Fix style problems in linuxload.c
  linux-user: fill ppid field in /proc/self/stat
  linux-user/elfload: Implement ELF_HWCAP for RISC-V

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/tcg: generalise the disabling of the signals test

It turns out you push down in one place and failures pop-up elsewhere.
Especially on CI. Disable for now for all targets.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/syscall: Remove hardcoded tabs (code style)

We are going to move this code, fix its style first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210704183755.655002-12-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/alpha: Remove hardcoded tabs (code style)

We are going to move this code, fix its style first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/mips: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN

Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/hppa: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN

Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/alpha: Handle TARGET_EWOULDBLOCK as TARGET_EAGAIN

Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Fix style problems in linuxload.c

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706234932.356913-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: fill ppid field in /proc/self/stat

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmwnqnef5g.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/elfload: Implement ELF_HWCAP for RISC-V

Set I, M, A, F, D and C bit for hwcap if misa is set.

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706035015.122899-1-kito.cheng@sifive.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

MAINTAINERS: Add maintainer for vhost-user RNG implementation

This patch adds entry for the vhost-user-rng related files.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20210614202842.581640-6-mathieu.poirier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

block/io: Merge discard request alignments

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210705130458.97642-3-akihiko.odaki@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

block: Add backend_defaults property

backend_defaults property allow users to control if default block
properties should be decided with backend information.

If it is off, any backend information will be discarded, which is
suitable if you plan to perform live migration to a different disk backend.

If it is on, a block device may utilize backend information more
aggressively.

By default, it is auto, which uses backend information for block
sizes and ignores the others, which is consistent with the older
versions.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210705130458.97642-2-akihiko.odaki@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

block/file-posix: Optimize for macOS

This commit introduces "punch hole" operation and optimizes transfer
block size for macOS.

Thanks to Konstantin Nazarov for detailed analysis of a flaw in an
old version of this change:
https://gist.github.com/akihikodaki/87df4149e7ca87f18dc56807ec5a1bc5#gistcomment-3654667

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210705130458.97642-1-akihiko.odaki@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More Meson test conversions and configure cleanups
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin

# gpg: Signature made Tue 06 Jul 2021 08:35:23 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (40 commits)
  config-host.mak: remove unused compiler-related lines
  Set icon for QEMU binary on Mac OS
  qemu-option: remove now-dead code
  machine: add smp compound property
  vl: switch -M parsing to keyval
  keyval: introduce keyval_parse_into
  keyval: introduce keyval_merge
  qom: export more functions for use with non-UserCreatable objects
  configure: convert compiler tests to meson, part 6
  configure: convert compiler tests to meson, part 5
  configure: convert compiler tests to meson, part 4
  configure: convert compiler tests to meson, part 3
  configure: convert compiler tests to meson, part 2
  configure: convert compiler tests to meson, part 1
  configure: convert HAVE_BROKEN_SIZE_MAX to meson
  configure, meson: move CONFIG_IVSHMEM to meson
  meson: store dependency('threads') in a variable
  meson: sort existing compiler tests
  configure, meson: convert libxml2 detection to meson
  configure, meson: convert liburing detection to meson
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

config-host.mak: remove unused compiler-related lines

Most of the build is not done via Makefiles, therefore the toolchain
variables are mostly unused.  They are still used by tests/tcg
and pc-bios/roms, but most of them are not needed there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Set icon for QEMU binary on Mac OS

Before switching the build system over to Meson, an icon was
added to the QEMU binary on Mac OS. This patch adds back that
feature; it piggybacks on the existing scripts/entitlement.sh,
which already does in-place changes to the executable on Darwin.

Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-Id: <20210705195328.36442-1-programmingkidx@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-option: remove now-dead code

-M was the sole user of qemu_opts_set and qemu_opts_set_defaults,
remove them and the arguments that they used.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

machine: add smp compound property

Make -smp syntactic sugar for a compound property "-machine
smp.{cores,threads,cpu,...}".  machine_smp_parse is replaced by the
setter for the property.

numa-test will now cover the new syntax, while other tests
still use -smp.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vl: switch -M parsing to keyval

Switch from QemuOpts to keyval.  This enables the introduction
of non-scalar machine properties, and JSON syntax in the future.

For JSON syntax to be supported right now, we would have to
consider what would happen if string-based dictionaries (produced by
-M key=val) were to be merged with strongly-typed dictionaries
(produced by -M {'key': 123}).

The simplest way out is to never enter the situation, and only allow one
-M option when JSON syntax is in use.  However, we want options such as
-smp to become syntactic sugar for -M, and this is a problem; as soon
as -smp becomes a shortcut for -M, QEMU would forbid using -M '{....}'
together with -smp.  Therefore, allowing JSON syntax right now for -M
would be a forward-compatibility nightmare and it would be impossible
anyway to introduce -M incrementally in tools.

Instead, support for JSON syntax is delayed until after the main
options are converted to QOM compound properties.  These include -boot,
-acpitable, -smbios, -m, -semihosting-config, -rtc and -fw_cfg.  Once JSON
syntax is introduced, these options will _also_ be forbidden together
with -M '{...}'.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

keyval: introduce keyval_parse_into

Allow parsing multiple keyval sequences into the same dictionary.
This will be used to simplify the parsing of the -M command line
option, which is currently a .merge_lists = true QemuOpts group.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

keyval: introduce keyval_merge

This patch introduces a function that merges two keyval-produced
(or keyval-like) QDicts.  It can be used to emulate the behavior of
.merge_lists = true QemuOpts groups, merging -readconfig sections and
command-line options in a single QDict, and also to implement -set.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qom: export more functions for use with non-UserCreatable objects

Machines and accelerators are not user-creatable but they are going
to share similar command-line parsing machinery.  Export functions
that will be used with -machine and -accel in softmmu/vl.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: convert compiler tests to meson, part 6

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: convert compiler tests to meson, part 5

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: convert compiler tests to meson, part 4

And remove them from the summary, since now their outcome is verbosely
included in the meson output.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: convert compiler tests to meson, part 3

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: convert compiler tests to meson, part 2

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: convert compiler tests to meson, part 1

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: convert HAVE_BROKEN_SIZE_MAX to meson

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: move CONFIG_IVSHMEM to meson

This is a duplicate of CONFIG_EVENTFD, handle it directly in meson.build.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: store dependency('threads') in a variable

It can be useful for has_function checks.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: sort existing compiler tests

The next patches will add more compiler tests.  Sort and group the
existing tests, keeping similar cc.has_* tests together and sorting them
alphabetically by macro name.  This should make it easier to look for
examples when adding new tests to meson.build.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: convert libxml2 detection to meson

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: convert liburing detection to meson

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: convert libpmem detection to meson

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: convert libdaxctl detection to meson

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: convert virgl detection to meson

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: convert vte detection to meson

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: drop vte-2.90 check

All currently supported distros have vte 0.37 or newer, which is where the
ABI changed from 2.90 to 2.91.  So drop support for the older ABI.

Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Move X86XSaveArea into TCG

Given that TCG is now the only consumer of X86XSaveArea, move the
structure definition and associated offset declarations and checks to a
TCG specific header.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-9-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Populate x86_ext_save_areas offsets using cpuid where possible

Rather than relying on the X86XSaveArea structure definition,
determine the offset of XSAVE state areas using CPUID leaf 0xd where
possible (KVM and HVF).

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-8-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Observe XSAVE state area offsets

Rather than relying on the X86XSaveArea structure definition directly,
the routines that manipulate the XSAVE state area should observe the
offsets declared in the x86_ext_save_areas array.

Currently the offsets declared in the array are derived from the
structure definition, resulting in no functional change.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-7-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Make x86_ext_save_areas visible outside cpu.c

Provide visibility of the x86_ext_save_areas array and associated type
outside of cpu.c.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-6-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Pass buffer and length to XSAVE helper

In preparation for removing assumptions about XSAVE area offsets, pass
a buffer pointer and buffer length to the XSAVE helper functions.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-5-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Clarify the padding requirements of X86XSaveArea

Replace the hard-coded size of offsets or structure elements with
defined constants or sizeof().

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-4-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Consolidate the X86XSaveArea offset checks

Rather than having similar but different checks in cpu.h and kvm.c,
move them all to cpu.h.
Message-Id: <20210705104632.2902400-3-david.edmondson@oracle.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Declare constants for XSAVE offsets

Declare and use manifest constants for the XSAVE state component
offsets.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-2-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

coverity-scan: switch to vpath build

This is the patch that has been running on the coverity cronjob
for a few weeks now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

coverity-scan: Remove lm32 / unicore32 targets

lm32 has been removed in commit 9d49bcf6992 ("Drop the deprecated
lm32 target"), and unicore32 in 4369223902a ("Drop the deprecated
unicore32 target").

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210619091342.3660495-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-options: Improve the documentation of the -display options

The sdl and gtk display options support more parameters than currently
documented. Also the "vnc" option got lost during a recent commit,
add it again.

Fixes: ddc717581c ("Add display suboptions to man pages")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ui: Mark the '-no-quit' option as deprecated

It's just a wrapper around the -display ...,window-close=off parameter,
and the name "no-quit" is rather confusing compared to "window-close"
(since there are still other means to quit the emulator), so we should
rather tell our users to use the "window-close" parameter instead.

While we're at it, update the documentation to state that
"-no-quit" is available for GTK, too, not only for SDL.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ui: Fix the "-display sdl,window_close=..." parameter

According to the QAPI schema, there is a "-" and not a "_" between
"window" and "close", and we're also talking about "window-close"
in the long parameter description in qemu-options.hx, so we should
make sure that we rather use the variant with the "-" by default
instead of only allowing the one with the "_" here. The old way
still stays enabled for compatibility, but we deprecate it, so that
we can switch to a QAPIfied parameter one day more easily.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

softmmu/vl: Remove obsolete comment about the "frame" parameter

The frame parameter has been removed along with the support for
SDL 1.2.

Fixes: 09bd7ba9f5 ("Remove deprecated -no-frame option")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Makefile: Remove /usr/bin/env wrapper from the SHELL variable

The wrapper should not be needed here (it's not the shebang line of
a shell script), and it is causing trouble on Haiku where "env"
resides in a different directory.

Reported-by: Richard Zak <richard.j.zak@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210705082542.936856-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20210705' into staging

9pfs: misc patches

* Add link to 9p developer docs.

* Fix runtime check whether client supplied relative path is the export
  root.

* Performance optimization of Twalk requests.

* Code cleanup.

# gpg: Signature made Mon 05 Jul 2021 12:13:34 BST
# gpg:                using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg:                issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38  4926 30DB 47C3 A012 D5F4
#      Subkey fingerprint: 96D8 D110 CF7A F808 4F88  5901 34C2 B587 65A4 7395

* remotes/cschoenebeck/tags/pull-9p-20210705:
  9pfs: reduce latency of Twalk
  9pfs: drop root_qid
  9pfs: replace not_same_qid() by same_stat_id()
  9pfs: drop fid_to_qid()
  9pfs: capture root stat
  9pfs: fix not_same_qid()
  9pfs: simplify v9fs_walk()
  9pfs: add link to 9p developer docs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>