Merge tag 'drm-misc-next-2023-10-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.7-rc1:

drm-misc-next-2023-10-19 + following:

UAPI Changes:

Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.

Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.

Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com

usb: typec: altmodes/displayport: fixup drm internal api change vs new user.

usb: typec: altmodes/displayport: Signal hpd low when exiting mode
and
drm: Add HPD state to drm_connector_oob_hotplug_event()

sideswiped each other.

Signal disconnected always.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/amdgpu: move buffer funcs setting up a level

Rather than doing this in the IP code for the SDMA paging
engine, move it up to the core device level init level.
This should fix the scheduler init ordering.

v2: drop extra parens
v3: drop SDMA helpers
v4: Added a Fixes tag because amdgpu dereferences an uninitialized
    scheduler without this patch, and this patch fixes this. (Luben)

Tested-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Fixes: 56e449603f0ac5 ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>

MAINTAINERS: Update the GPU Scheduler email

Update the GPU Scheduler maintainer email.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231026174438.18427-2-ltuikov89@gmail.com

drm/sched: Convert the GPU scheduler to variable number of run-queues

The GPU scheduler has now a variable number of run-queues, which are set up at
drm_sched_init() time. This way, each driver announces how many run-queues it
requires (supports) per each GPU scheduler it creates. Note, that run-queues
correspond to scheduler "priorities", thus if the number of run-queues is set
to 1 at drm_sched_init(), then that scheduler supports a single run-queue,
i.e. single "priority". If a driver further sets a single entity per
run-queue, then this creates a 1-to-1 correspondence between a scheduler and
a scheduled entity.

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com

MAINTAINERS: drm/ci: add entries for xfail files

DRM CI keeps track of which tests are failing, flaking or being skipped
by the ci in the expectations files. Add entries for those files to the
corresponding driver maintainer, so they can be notified when they
change.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230919182249.153499-1-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: docs: add step about how to request privileges

Clarify the procedure developer must follow to request privileges to
run tests on Freedesktop gitlab CI.

This measure was added to avoid untrusted people to misuse the
infrastructure.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-11-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: do not automatically retry on error

Since the kernel doesn't use a bot like Mesa that requires tests to pass
in order to merge the patches, leave it to developers and/or maintainers
to manually retry.

Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-10-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: export kernel config

Export the resultant kernel config, making it easier to verify if the
resultant config was correctly generated.

Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-9-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: increase i915 job timeout to 1h30m

With the new sharding, the default job timeout is not enough for i915
and their jobs are failing before completing.

See below the current execution time:

🞋 job i915:tgl 8/8 has new status: success (37m3s)
🞋 job i915:tgl 7/8 has new status: success (19m43s)
🞋 job i915:tgl 6/8 has new status: success (21m47s)
🞋 job i915:tgl 5/8 has new status: success (18m16s)
🞋 job i915:tgl 4/8 has new status: success (21m43s)
🞋 job i915:tgl 3/8 has new status: success (17m59s)
🞋 job i915:tgl 2/8 has new status: success (22m15s)
🞋 job i915:tgl 1/8 has new status: success (18m52s)
🞋 job i915:cml 2/2 has new status: success (1h19m58s)
🞋 job i915:cml 1/2 has new status: success (55m45s)
🞋 job i915:whl 2/2 has new status: success (1h8m56s)
🞋 job i915:whl 1/2 has new status: success (54m3s)
🞋 job i915:kbl 3/3 has new status: success (37m43s)
🞋 job i915:kbl 2/3 has new status: success (36m37s)
🞋 job i915:kbl 1/3 has new status: success (34m52s)
🞋 job i915:amly 2/2 has new status: success (1h7m60s)
🞋 job i915:amly 1/2 has new status: success (59m18s)
🞋 job i915:glk 2/2 has new status: success (58m26s)
🞋 job i915:glk 1/2 has new status: success (50m23s)
🞋 job i915:apl 3/3 has new status: success (1h6m39s)
🞋 job i915:apl 2/3 has new status: success (1h4m45s)
🞋 job i915:apl 1/3 has new status: success (1h7m38s)

(generated with ci_run_n_monitor.py script)

The longest job is 1h19m58s, so adjust the timeout.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-8-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: add subset-1-gfx to LAVA_TAGS and adjust shards

The Collabora Lava farm added a tag called `subset-1-gfx` to half of
devices the graphics community use.

Lets use this tag so we don't occupy all the resources.

This is particular important because Mesa3D shares the resources with
DRM-CI and use them to do pre-merge tests, so it can block developers
from getting their patches merged.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-7-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: clean up xfails (specially flakes list)

Since the script that collected the list of the expectation files was
bogus and placing test to the flakes list incorrectly, restart the
expectation files with the correct script.

This reduces a lot the number of tests in the flakes list.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-6-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: uprev IGT and make sure core_getversion is run

IGT has recently merged a patch that makes code_getversion test to fails
if the driver isn't loaded or if it isn't the expected one defined in
variable IGT_FORCE_DRIVER.

Without this test, jobs were passing when the driver didn't load or
probe for some reason, giving the illusion that everything was ok.

Uprev IGT to include this modification and include core_getversion test
in all the shards.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-5-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: add helper script update-xfails.py

Add helper script that given a gitlab pipeline url, analyse which are
the failures and flakes and update the xfails folder accordingly.

Example:
Trigger a pipeline in gitlab infrastructure, than re-try a few jobs more
than once (so we can have data if failures are consistent across jobs
with the same name or if they are flakes) and execute:

update-xfails.py https://gitlab.freedesktop.org/helen.fornazier/linux/-/pipelines/970661

git diff should show you that it updated files in xfails folder.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Tested-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-4-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: fix DEBIAN_ARCH and get amdgpu probing

amdgpu driver wasn't loading because amdgpu firmware wasn't being
installed in the rootfs due to the wrong DEBIAN_ARCH variable.

rename ARCH to DEBIAN_ARCH also, so we don't have the confusing
DEBIAN_ARCH, KERNEL_ARCH and ARCH.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-3-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: uprev mesa version: fix container build & crosvm

When building containers, some rust packages were installed without
locking the dependencies version, which got updated and started giving
errors like:

error: failed to compile `bindgen-cli v0.62.0`, intermediate artifacts can be found at `/tmp/cargo-installkNKRwf`
Caused by:
  package `rustix v0.38.13` cannot be built because it requires rustc 1.63 or newer, while the currently active rustc version is 1.60.0

A patch to Mesa was added fixing this error, so update it.

Also, commit in linux kernel 6.6 rc3 broke booting in crosvm.
Mesa has upreved crosvm to fix this issue.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
[crosvm mesa update]
Co-Developed-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
[v1 container build uprev]
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-2-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: Enable CONFIG_BACKLIGHT_CLASS_DEVICE

Dependency for CONFIG_DRM_PANEL_EDP.  Missing this was causing the drm
driver to not probe on devices that use panel-edp.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231002164715.157298-1-robdclark@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: force-enable CONFIG_MSM_MMCC_8996 as built-in

Enable CONFIG_MSM_MMCC_8996, the multimedia clock controller on Qualcomm
MSM8996 to prevent the the board from hitting the probe deferral
timeouts in CI run.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231008132320.762542-2-dmitry.baryshkov@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/ci: pick up -external-fixes from the merge target repo

In case of the merge requests it might be useful to push repo-specific
fixes which have not yet propagated to the -external-fixes branch in the
main UPSTREAM_REPO. For example, in case of drm/msm development, we are
staging fixes locally for testing, before pushing them to the drm/drm
repo. Thus, if the CI run was triggered by merge request, also pick up
the -external fixes basing on the the CI_MERGE target repo / and branch.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231008132320.762542-1-dmitry.baryshkov@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/doc: ci: Require more context for flaky tests

Flaky tests can be very difficult to reproduce after the facts, which
will make it even harder to ever fix.

Let's document the metadata we agreed on to provide more context to
anyone trying to address these fixes.

Link: https://lore.kernel.org/dri-devel/CAPj87rPbJ1V1-R7WMTHkDat2A4nwSd61Df9mdGH2PR=ZzxaU=Q@mail.gmail.com/
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231025142441.745947-1-mripard@kernel.org

drm/doc: document DRM_IOCTL_MODE_CREATE_DUMB

The main motivation is to repeat that dumb buffers should not be
abused for anything else than basic software rendering with KMS.
User-space devs are more likely to look at the IOCTL docs than to
actively search for the driver-oriented "Dumb Buffer Objects"
section.

v2: reference DRM_CAP_DUMB_BUFFER, DRM_CAP_DUMB_PREFERRED_DEPTH and
DRM_CAP_DUMB_PREFER_SHADOW (Pekka)

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821131548.269204-1-contact@emersion.fr

Merge tag 'amd-drm-next-6.7-2023-10-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.7-2023-10-20:

amdgpu:
- SMU 13 updates
- UMSCH updates
- DC MPO fixes
- RAS updates
- MES 11 fixes
- Fix possible memory leaks in error pathes
- GC 11.5 fixes
- Kernel doc updates
- PSP updates
- APU IMU fixes
- Misc code cleanups
- SMU 11 fixes
- OD fix
- Frame size warning fixes
- SR-IOV fixes
- NBIO 7.11 updates
- NBIO 7.7 updates
- XGMI fixes
- devcoredump updates

amdkfd:
- Misc code cleanups
- SVM fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020195043.4937-1-alexander.deucher@amd.com

drm/rockchip: vop: Add NV15, NV20 and NV30 support

Add support for displaying 10-bit 4:2:0 and 4:2:2 formats produced by
the Rockchip Video Decoder on RK322X, RK3288, RK3328 and RK3399.
Also add support for 10-bit 4:4:4 format while at it.

V5: Use drm_format_info_min_pitch() for correct bpp
    Add missing NV21, NV61 and NV42 formats
V4: Rework RK3328/RK3399 win0/1 data to not affect RK3368
V2: Added NV30 support

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-3-jonas@kwiboo.se

drm/fourcc: Add NV20 and NV30 YUV formats

DRM_FORMAT_NV20 and DRM_FORMAT_NV30 formats is the 2x1 and non-subsampled
variant of NV15, a 10-bit 2-plane YUV format that has no padding between
components. Instead, luminance and chrominance samples are grouped into 4s
so that each group is packed into an integer number of bytes:

YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes

The '20' and '30' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a multiple
of 4.

V2: Added NV30 format

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-2-jonas@kwiboo.se

drm/rockchip: vop2: rename window formats to show window type using them

formats_win_full_10bit is for cluster window,
formats_win_full_10bit_yuyv is for rk356x esmart, rk3588 esmart window
will support more format.
formats_win_lite is for smart window.

Rename it based the windows type may let meaning is clearer

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094339.2476142-1-andyshrk@163.com

drm/rockchip: vop2: Add more supported 10bit formats

Add 10 bit RGB and AFBC based YUV format supported
by vop2.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094318.2476081-1-andyshrk@163.com

drm/rockchip: vop2: remove the unsupported format of cluster window

The cluster window on vop2 doesn't support linear yuv
format(NV12/16/24), it only support afbc based yuv
format(DRM_FORMAT_YUV420_8BIT/10BIT), which will be
added in next patch.

Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094239.2475851-1-andyshrk@163.com

drm/rockchip: vop: fix format bpp calculation

We can't rely on cpp for bpp calculation as the cpp of
some formats(DRM_FORMAT_YUV420_8BIT/10BIT, etc) is zero.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094210.2475771-1-andyshrk@163.com

drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode

In order to support burst mode, vendor drivers set lane_mbps higher than
bandwidth through DPI interface.  So, calculate horizontal component lane
byte clock cycle(lbcc) based on lane_mbps instead of pixel clock rate for
burst mode.

Fixes: ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc")
Reported-by: Heiko Stübner <heiko@sntech.de>
Closes: https://lore.kernel.org/linux-arm-kernel/5979575.UjTJXf6HLC@diego/T/#u
Tested-by: Heiko Stübner <heiko@sntech.de> # px30 minievb with xinpeng xpp055c272
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018035212.1778767-1-victor.liu@nxp.com

drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()

Currently drm_client_buffer_addfb() uses the legacy drm_mode_addfb(),
which uses bpp and depth to guess the wanted buffer format.
However, drm_client_buffer_addfb() already knows the exact buffer
format, so there is no need to convert back and forth between buffer
format and bpp/depth, and the function can just call drm_mode_addfb2()
directly instead.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b84adfc686288714e69d0442d22f1259ff74903.1697379891.git.geert@linux-m68k.org

Merge tag 'topic/vmemdup-user-array-2023-10-24-1' of git://anongit.freedesktop.org/drm/drm into drm-next

vmemdup-user-array API and changes with it.

This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024010905.646830-1-airlied@redhat.com

drm/doc: use cross-references for macros

These will show up as monospace, and will get linkified as soon as
we document the macro they point to.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712135723.173506-1-contact@emersion.fr

drm/vc4: fix typo

Replace 'pack' with 'back'.

Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023085929.1445594-1-dario.binacchi@amarulasolutions.com

Merge tag 'drm-msm-next-2023-10-17' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.7

DP:
- use existing helpers for DPCD handling instead of open-coded functions
- set the subconnector type according to the plugged cable / dongle
  skip validity check for DP CTS EDID checksum

DPU:
- continued migration of feature flags to use core revision checks
- reworked interrupts code to use '0' as NO_IRQ, removed raw IRQ indices
  from log / trace output

gpu:
- a7xx support (a730, a740)
- fixes and additional speedbins for a635, a643

core:
- decouple msm_drv from kms to more cleanly support headless devices (like
  imx5+a2xx)

From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvzkBL2_OgyOeP_b6rVEjrNdfm8jcKzaB04HqHyT5jYwA@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

BackMerge tag 'v6.6-rc7' into drm-next

This is needed to add the msm pr which is based on a higher base.

Signed-off-by: Dave Airlie <airlied@redhat.com>

accel/ivpu: Delete the TODO file

The work items listed in the TODO file of this driver file are either
completed or dropped. The file is no more significant according
to the maintainers. Hence removing it from the sources.

Suggested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZTAucrOT69/tQK2o@runicha.com

accel/ivpu/37xx: Remove support for FPGA and simics

We do not run 37xx VPU on non-silicon platforms any longer.
Remove deprecated code to make it cleaner.

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-7-stanislaw.gruszka@linux.intel.com

accel/ivpu: Do not initialize parameters on power up

Initialize HW specific parameters only once. We do not have to do this
on every power_up (performed during initialization and on resume). Move
corresponding code to ->info_init()

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com

accel/ivpu: Print IPC type string instead of number

Introduce ivpu_jsm_msg_type_to_str() helper to print type of IPC
message. This will make reading logs and debugging IPC issues easier.

Co-developed-by: Maciej Falkowski <maciej.falkowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-5-stanislaw.gruszka@linux.intel.com

accel/ivpu: Read clock rate only if device is up

Do not unnecessarily wake up device to read clock rate.
Return 0 as clk_rate if device is suspended.

Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-4-stanislaw.gruszka@linux.intel.com

accel/ivpu: Fix verbose version of REG_POLL macros

Remove two out of four _POLL macros. For two remaining _POLL
macros add message about polling register start and finish.

Additionally avoid inconsequence when using REGV_WR/RD macros in
MMU code - passing raw register offset instead of register name.

Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-3-stanislaw.gruszka@linux.intel.com

accel/ivpu: Use ratelimited warn and err in IPC/JSM

Quite often during test corner cases IPC, JSM functions can flood
dmesg with warn or err messages. With that lost dmesg history.
Change warn, err to ratelimited versions in IPC, JSM to suppress
dmesg spam occurrence during fail test scenarios.

Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-2-stanislaw.gruszka@linux.intel.com

Linux 6.6-rc7

Merge tag 'phy-fixes-6.6' of git://git./linux/kernel/git/phy/linux-phy

Pull phy fixes from Vinod Koul:

 - mapphone-mdm6600 runtime pm & pinctrl handling fixes

 - Qualcomm qmp usb pcs register fixes, qmp pcie register size warning
   fix, m31 fixes for wrong pointer in PTR_ERR and dropping wrong vreg
   check, qmp combo fix for 8550 power config register

 - realtek usb fix for debugfs_create_dir() and kconfig dependency

* tag 'phy-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: realtek: Realtek PHYs should depend on ARCH_REALTEK
  phy: qualcomm: Fix typos in comments
  phy: qcom-qmp-combo: initialize PCS_USB registers
  phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1
  phy: qcom: m31: Remove unwanted qphy->vreg is NULL check
  phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()
  phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static
  phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
  dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size
  phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
  phy: qcom-qmp-usb: initialize PCS_USB registers
  phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins
  phy: mapphone-mdm6600: Fix runtime PM for remove
  phy: mapphone-mdm6600: Fix runtime disable on probe

Merge tag 'efi-fixes-for-v6.6-3' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:
 "The boot_params pointer fix uses a somewhat ugly extern struct
  declaration but this will be cleaned up the next cycle.

   - don't try to print warnings to the console when it is no longer
     available

   - fix theoretical memory leak in SSDT override handling

   - make sure that the boot_params global variable is set before the
     KASLR code attempts to hash it for 'randomness'

   - avoid soft lockups in the memory acceptance code"

* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
  x86/boot: efistub: Assign global boot_params variable
  efi: fix memory leak in krealloc failure handling
  x86/efistub: Don't try to print after ExitBootService()

Merge tag 'powerpc-6.6-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix stale propagated yield_cpu in qspinlocks leading to lockups

 - Fix broken hugepages on some configs due to ARCH_FORCE_MAX_ORDER

 - Fix a spurious warning when copros are in use at exit time

Thanks to Nicholas Piggin, Christophe Leroy, Nysal Jan K.A Sachin Sant,
and Shrikanth Hegde.

* tag 'powerpc-6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/qspinlock: Fix stale propagated yield_cpu
  powerpc/64s/radix: Don't warn on copros in radix__tlb_flush()
  powerpc/mm: Allow ARCH_FORCE_MAX_ORDER up to 12

Merge tag 'gpio-fixes-for-v6.6-rc7' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - fix interrupt handling in suspend and wakeup in gpio-vf610

 - fix a bug on setting direction to output in gpio-vf610

 - add a missing memset() in gpio ACPI code

* tag 'gpio-fixes-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: acpi: Add missing memset(0) to acpi_get_gpiod_from_data()
  gpio: vf610: set value before the direction to avoid a glitch
  gpio: vf610: mask the gpio irq in system suspend and support wakeup

Merge tag 'rust-fixes-6.6' of https://github.com/Rust-for-Linux/linux

Pull rust fixes from Miguel Ojeda:

 - GCC build: fix bindgen build error with '-fstrict-flex-arrays'

 - Error module: fix the description for 'ECHILD' and fix Markdown
   style nit

 - Code docs: fix logo replacement

 - Docs: update docs output path

 - Kbuild: remove old docs output path in 'cleandocs' target

* tag 'rust-fixes-6.6' of https://github.com/Rust-for-Linux/linux:
  rust: docs: fix logo replacement
  kbuild: remove old Rust docs output path
  docs: rust: update Rust docs output path
  rust: fix bindgen build error with fstrict-flex-arrays
  rust: error: Markdown style nit
  rust: error: fix the description for `ECHILD`

Merge tag 'sched-urgent-2023-10-21' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Ingo Molnar:
 "Fix a recently introduced use-after-free bug"

* tag 'sched-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/eevdf: Fix heap corruption more

Merge tag 'perf-urgent-2023-10-21' of git://git./linux/kernel/git/tip/tip

Pull perf events fix from Ingo Molnar:
 "Fix group event semantics"

* tag 'perf-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Disallow mis-matched inherited group reads

Merge tag 'probes-fixes-v6.6-rc6.2' of git://git./linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - kprobe-events: Fix kprobe events to reject if the attached symbol is
   not unique name because it may not the function which the user want
   to attach to. (User can attach a probe to such symbol using the
   nearest unique symbol + offset.)

 - selftest: Add a testcase to ensure the kprobe event rejects non
   unique symbol correctly.

* tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  selftests/ftrace: Add new test case which checks non unique symbol
  tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols

Merge tag 's390-6.6-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix IOMMU bitmap allocation in s390 PCI to avoid out of bounds access
   when IOMMU pages aren't a multiple of 64

 - Fix kasan crashes when accessing DCSS mapping in memory holes by
   adding corresponding kasan zero shadow mappings

 - Fix a memory leak in css_alloc_subchannel in case
   dma_set_coherent_mask fails

* tag 's390-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix iommu bitmap allocation
  s390/kasan: handle DCSS mapping in memory holes
  s390/cio: fix a memleak in css_alloc_subchannel

Merge tag 'platform-drivers-x86-v6.6-5' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Fix spurious brightness down presses on newer Asus laptop models

 -  Fix backlight control not working on T2 Mac Pro all-in-ones

 -  Add Armin Wolf as new maintainer for the WMI bus driver and change
    its status from orphaned to maintained

 -  A few other small fixes

* tag 'platform-drivers-x86-v6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/mellanox: mlxbf-tmfifo: Fix a warning message
  apple-gmux: Hard Code max brightness for MMIO gmux
  platform/surface: platform_profile: Propagate error if profile registration fails
  platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c events
  platform/x86: asus-wmi: Only map brightness codes when using asus-wmi backlight control
  platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
  platform/x86: wmi: Update MAINTAINERS entry
  platform/x86: msi-ec: Fix the 3rd config
  platform/x86: intel-uncore-freq: Conditionally create attribute for read frequency
  platform: mellanox: Fix a resource leak in an error handling path in probing flow

Merge tag 'usb-6.6-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes and ids from Greg KH:
 "Here are four small patches for USB and Thunderbolt for 6.6-rc7 that
  do the following:

   - new usb-serial device ids

   - thunderbolt driver fix for reported issue

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add Fibocom to DELL custom modem FM101R-GL
  USB: serial: option: add entry for Sierra EM9191 with new firmware
  USB: serial: option: add Telit LE910C4-WWX 0x1035 composition
  thunderbolt: Call tb_switch_put() once DisplayPort bandwidth request is finished

Merge tag 'v6.6-p5' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
 "Fix a 6.5 regression in crypto/asymmetric_keys"

* tag 'v6.6-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  KEYS: asymmetric: Fix sign/verify on pkcs1pad without a hash

Merge tag 'iomap-6.6-fixes-5' of git://git./fs/xfs/xfs-linux

Pull iomap fix from Darrick Wong:

 - Fix a bug where a writev consisting of a bunch of sub-fsblock writes
   where the last buffer address is invalid could lead to an infinite
   loop

* tag 'iomap-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: fix short copy in iomap_write_iter()

Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix regression in reading scale and unit files from sysfs for PMU
   events, so that we can use that info to pretty print instead of
   printing raw numbers:

     # perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2

      Performance counter stats for 'system wide':

                 1.64 Joules power/energy-ram/
                 0.20 Joules power/energy-gpu/

          2.001228914 seconds time elapsed
     #
     # grep -m1 "model name" /proc/cpuinfo
     model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
     #

 - The small llvm.cpp file used to check if the llvm devel files are
   present was incorrectly deleted when removing the BPF event in 'perf
   trace', put it back as it is also used by tools/bpf/bpftool, that
   uses llvm routines to do disassembly of BPF object files.

 - Fix use of addr_location__exit() in dlfilter__object_code(), making
   sure that it is only used to pair a previous addr_location__init()
   call.

* tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  tools build: Fix llvm feature detection, still used by bpftool
  perf dlfilter: Add a test for object_code()
  perf dlfilter: Fix use of addr_location__exit() in dlfilter__object_code()
  perf pmu: Fix perf stat output with correct scale and unit

Merge tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:
 "One single fix to assert check in user_events abi_test to properly
  check bit value on Big Endian architectures. The code treated the bit
  values as Little Endian and the check failed on Big Endian"

* tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/user_events: Fix abi_test for BE archs

Merge tag 'nfs-for-6.6-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client fixes from Anna Schumaker:
 "Stable Fix:
   - Fix a pNFS hang in nfs4_evict_inode()

  Fixes:
   - Force update of suid/sgid bits after an NFS v4.2 ALLOCATE op
   - Fix a potential oops in nfs_inode_remove_request()
   - Check the validity of the layout pointer in ff_layout_mirror_prepare_stats()
   - Fix incorrectly marking the pNFS MDS with USE_PNFS_DS in some cases"

* tag 'nfs-for-6.6-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.1: fixup use EXCHGID4_FLAG_USE_PNFS_DS for DS server
  pNFS/flexfiles: Check the layout validity in ff_layout_mirror_prepare_stats
  pNFS: Fix a hang in nfs4_evict_inode()
  NFS: Fix potential oops in nfs_inode_remove_request()
  nfs42: client needs to strip file mode's suid/sgid bit after ALLOCATE op

Merge tag 'fsnotify_for_v6.6-rc7' of git://git./linux/kernel/git/jack/linux-fs

Pull fanotify fix from Jan Kara:
 "Disable superblock / mount marks for filesystems that can encode file
  handles but not open them (currently only overlayfs).

  It is not clear the functionality is useful in any way so let's better
  disable it before someone comes up with some creative misuse"

* tag 'fsnotify_for_v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: limit reporting of event with non-decodeable file handles

Merge tag 'acpi-6.6-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "These fix the ACPI initialization ordering on ARM and ACPI IRQ
  management in the cases when irq_create_fwspec_mapping() fails.

  Specifics:

   - Fix ACPI initialization ordering on ARM that was changed
     incorrectly during the 6.5 development cycle (Hanjun Guo)

   - Make acpi_register_gsi() return an error code as appropriate when
     irq_create_fwspec_mapping() returns 0 on failure (Sunil V L)"

* tag 'acpi-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Move acpi_arm_init() to the place of after acpi_ghes_init()
  ACPI: irq: Fix incorrect return value in acpi_register_gsi()

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two small fixes, both in drivers.

  The mptsas one is really fixing an error path issue where it can leave
  the misc driver loaded even though the sas driver fails to initialize"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix double free of dsd_list during driver load
  scsi: mpt3sas: Fix in error path

Merge tag 'pinctrl-v6.6-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - Concurrent register updates in the Qualcomm LPASS pin controller gets
   a proper lock.

 - revert a mutex fix that was causing problems: contention on the mutex
   or something of the sort lead to probe reordering and MMC block
   devices start to register in a different order, which unsuspecting
   userspace is not ready to handle

* tag 'pinctrl-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: avoid unsafe code pattern in find_pinctrl()"
  pinctrl: qcom: lpass-lpi: fix concurrent register updates

Merge tag 'mtd/fixes-for-6.6-rc7' of git://git./linux/kernel/git/mtd/linux

Pull MTD fixes from Miquel Raynal:
 "In the raw NAND subsystem, the major fix prevents using cached reads
  with devices not supporting it. There was two bug reports about this.

  Apart from that, three drivers (pl353, arasan and marvell) could
  sometimes hide page program failures due to their their own program
  page helper not being fully compliant with the specification (many
  drivers use the default helpers shared by the core). Adding a missing
  check prevents these situation.

  Finally, the Qualcomm driver had a broken error path.

  In the SPI-NAND subsystem one Micron device used a wrong bitmak
  reporting possibly corrupted ECC status.

  Finally, the physmap-core got stripped from its map_rom fallback by
  mistake, this feature is added back"

* tag 'mtd/fixes-for-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: Ensure the nand chip supports cached reads
  mtd: rawnand: qcom: Unmap the right resource upon probe failure
  mtd: rawnand: pl353: Ensure program page operations are successful
  mtd: rawnand: arasan: Ensure program page operations are successful
  mtd: spinand: micron: correct bitmask for ecc status
  mtd: physmap-core: Restore map_rom fallback
  mtd: rawnand: marvell: Ensure program page operations are successful

Merge tag 'mmc-v6.6-rc3' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Capture correct oemid-bits for eMMC cards
   - Fix error propagation for some ioctl commands
   - Hold retuning if SDIO is in 1-bit mode

  MMC host:
   - mtk-sd: Use readl_poll_timeout_atomic to not "schedule while atomic"
   - sdhci-msm: Correct minimum number of clocks
   - sdhci-pci-gli: Fix LPM negotiation so x86/S0ix SoCs can suspend
   - sdhci-sprd: Fix error code in sdhci_sprd_tuning()"

* tag 'mmc-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Capture correct oemid-bits for eMMC cards
  mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw
  mmc: core: Fix error propagation for some ioctl commands
  mmc: sdhci-sprd: Fix error code in sdhci_sprd_tuning()
  mmc: sdhci-pci-gli: fix LPM negotiation so x86/S0ix SoCs can suspend
  mmc: core: sdio: hold retuning if sdio in 1-bit mode
  dt-bindings: mmc: sdhci-msm: correct minimum number of clocks

drm/amd/display: Fix stack size issue on DML2

This commit is the last part of the fix that reduces the stack size in
the DML2 code.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Chaitanya Dhere <chaitanya.dhere@amd.com>
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce stack size by splitting function

When compiling with allmodconfig, gcc highlights the following error:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c: In function 'dml_core_mode_support':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:8229:1: error: the frame size of 2736 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
 8229 | } // dml_core_mode_support
      | ^
cc1: all warnings being treated as errors

This commit mitigates part of this problem by extracting the prefetch
code to its own function. After applying this commit, the stack size
reduces from 2736 to 2464, however, the stack size issue becomes part of
the new function.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Chaitanya Dhere <chaitanya.dhere@amd.com>
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remap unaligned svm ranges that have split

Split SVM ranges that have been mapped into 2MB page table entries,
require to be remap in case the split has happened in a non-aligned
VA.
[WHY]:
This condition causes the 2MB page table entries be split into 4KB
PTEs.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Create version number for coredumps

Even if there's nothing currently parsing amdgpu's coredump files, if
we eventually have such tools they will be glad to find a version field
to properly read the file.

Create a version number to be displayed on top of coredump file, to be
incremented when the file format or content get changed.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move coredump code to amdgpu_reset file

Giving that we use codedump just for device resets, move it's functions
and structs to a more semantic file, the amdgpu_reset.{c, h}.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Encapsulate all device reset info

To better organize struct amdgpu_device, keep all reset information
related fields together in a separated struct.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support the port num info based on the capability flag

XGMI TA will set the capability flag to indicate whether the port_num
info is supported or not. KGD checks the flag and accordingly picks up
the right buffer format and send the right command to TA to retrieve
the info.

v2: simplify the code by reusing the same statement (lijo)

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: prepare the output buffer for GET_PEER_LINKS command

Per the xgmi ta implementation, KGD needs to fill in node_ids
in concern into the shared command output buffer rather than the
command input buffer.

Input buffer is not used for GET_PEER_LINKS command execution.

In this way, xgmi ta can reuse the node info in the output buffer
just filled in and populate the same buffer with link info directly.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop status query/reset for GCEA 9.4.3 and MMEA 1.8

PMFW will be responsible for them.

v2: remove query interfaces.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update the xgmi ta interface header

Update the header file to the v20.00.00.13

v1: rename TA_COMMAND_XGMI__GET_GET_TOPOLOGY_INFO to
TA_COMMAND_XGMI__GET_TOPOLOGY_INFO

And also rename struct ta_xgmi_cmd_get_peer_link_info_output to
ta_xgmi_cmd_get_peer_link_info accordingly

v2: add structs to support xgmi GET_EXTEND_PEER_LINK command

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add set/get mca debug mode operations

Record the debug mode status in RAS.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: replace reset_error_count with amdgpu_ras_reset_error_count

Simplify the code.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add clockgating support for NBIO v7.7.1

add clockgating support for NBIO ip 7.7.1

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix missing stuff in NBIO v7.11

add get_clockgating_state, update_medium_grain_light_sleep and
update_medium_grain_clock_gating in nbio_v7_11_funcs
v1:
add missing funcs in nbio_v7_11.c
v2:
modify the if condition and add spport for nbio v7.11 clockgating.

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable RAS feature by default for APU

Enable RAS feature by default for aqua vanjaram on apu
platform.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo for amdgpu ras error data print

typo fix.

Fixes: 5b1270beb380 ("drm/amdgpu: add ras_err_info to identify RAS error source")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn: Add RB decouple feature under SRIOV - P4

- In VCN 4 SRIOV code path, add code to enable RB decouple feature

Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn: Add RB decouple feature under SRIOV - P3

- Update VCN header for RB decouple feature
- Add metadata struct, metadata will be placed after each RB

Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn: Add RB decouple feature under SRIOV - P2

- Add function to check if RB decouple is enabled under SRIOV

Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn: Add RB decouple feature under SRIOV - P1

- Update SRIOV header with RB decouple flag

Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix delete nodes that have been relesed

Fix delete nodes that it has been freed.

Fixes: 5b1270beb380 ("drm/amdgpu: add ras_err_info to identify RAS error source")
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable mca debug mode mode when ras enabled

Enable smu_v13_0_6 mca debug mode if ras is enabled.

Changed from V1:
enable mca debug mode if ras enabled.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add UVD_VCPU_INT_EN2 to dpg sram

Add RAS sepcifc programming to dpg sram.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Respect CONFIG_FRAME_WARN=0 in DML2

display_mode_code.c is unconditionally built with
-Wframe-larger-than=2048, which causes warnings even when
CONFIG_FRAME_WARN has been set to 0, which should show no warnings.

Use the existing $(frame_warn_flag) variable, which handles this
situation. This is basically commit 25f178bbd078 ("drm/amd/display:
Respect CONFIG_FRAME_WARN=0 in dml Makefile") but for DML2.

Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indenting

No functional modification involved.

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:2902 dm_resume() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6940
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Simplify bool conversion

./drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c:4802:84-89: WARNING: conversion to bool not needed here

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6901
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unneeded semicolon

./drivers/gpu/drm/amd/display/dc/dml2/dml2_dc_resource_mgmt.c:464:3-4: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6900
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove duplicated include in dce110_hwseq.c

./drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c: dce110_hwseq.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6897
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indentings

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn35/dcn35_fpu.c:261 dcn35_update_bw_bounding_box_fpu() warn: inconsistent indenting

Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Handle non-terminated overdrive commands.

The incoming strings might not be terminated by a newline
or a 0.

(found while testing a program that just wrote the string
 itself, causing a crash)

Cc: stable@vger.kernel.org
Fixes: e3933f26b657 ("drm/amd/pp: Add edit/commit/show OD clock/voltage support in sysfs")
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable software RAS in vcn v4_0_3

Set VCN/JPEG RAS masks to enable software RAS for
VCN and JPEG.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: define ras_reset_error_count function

Make the code architecture more simple.

v2: reuse ras_reset_error_count in ras_reset_error_status.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd:remove unused code

Function svm_range_split_by_grinity is not used,
so it is removed.

Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Support for getting power1_cap_min value

Support for getting power1_cap_min value on smu13 and smu11.
For other Asics, we still use 0 as the default value.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Log UE corrected by replay as correctable error

Support replay mode where UE could be converted to CE.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>