Olof Johansson [Tue, 11 Dec 2018 16:10:09 +0000 (08:10 -0800)]
Merge tag 'tegra-for-4.21-arm64-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree change for v4.21-rc1
These changes add a bunch of features for Tegra194 and Tegra186, such as
wake events, on-die RTC, temperature sensors, HDA for audio over HDMI
and fan support on Jetson Xavier to allow cooling of the device.
* tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (29 commits)
arm64: tegra: Set reg property for display-hub on Tegra194
arm64: tegra: Set reg property for display-hub on Tegra186
arm64: dts: tegra186: Enable IOMMU for SDHCI
arm64: tegra: Enable HDA controller on Jetson TX1
arm64: tegra: Add CEC controller on Tegra194
arm64: tegra: Enable HDA on Jetson Xavier
arm64: tegra: Add HDA controller on Tegra194
arm64: tegra: Add CEC controller on Tegra186
arm64: tegra: Enable HDA on Jetson TX2
arm64: tegra: Add HDA controller on Tegra186
arm64: tegra: Add temperature sensor on P2888
arm64: tegra: Add gpio-keys on Jetson Xavier
arm64: tegra: Add AON GPIO controller on Tegra194
arm64: tegra: p2888: Enable on-die RTC
arm64: tegra: Add RTC support on Tegra194
arm64: tegra: Enable PMC wake events on Tegra194
arm64: tegra: p3310: Enable on-die RTC
arm64: tegra: Add RTC support on Tegra186
arm64: tegra: Enable PMC wake events on Tegra186
arm64: tegra: Fix power key interrupt type on Jetson TX2
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:06:35 +0000 (08:06 -0800)]
Merge tag 'tegra-for-4.21-arm-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.21-rc1
These changes add the external memory controller on Tegra20 as well as
the VIC on Tegra124.
* tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add VIC on Tegra124
ARM: dts: tegra20: Add clock entry to External Memory Controller
ARM: dts: tegra20: Add interrupt entry to External Memory Controller
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:05:17 +0000 (08:05 -0800)]
Merge tag 'tegra-for-4.21-dt-bindings' of git://git./linux/kernel/git/tegra/linux into next/dt
dt-bindings: Changes for v4.21-rc1
This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.
* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra186-pmc: Add interrupt controller properties
dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
dt: bindings: Move tegra20-emc binding to memory-controllers directory
dt: bindings: tegra20-emc: Document clock property
dt: bindings: tegra20-emc: Document interrupt property
dt-bindings: usb: xhci-tegra: Add power-domain details
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:05:01 +0000 (08:05 -0800)]
Merge tag 'renesas-dt-bindings-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.21
* Move 'renesas,prr' binding to its own document
- Prepration for converting board-level bindings to json-schema
* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM
* tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:03:48 +0000 (08:03 -0800)]
Merge tag 'renesas-arm-dt2-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.21
* RZ/G1N (r8a7744) SoC
- Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B},
I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC,
thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE
- iWave G20D-Q7 board
- Initial support
- Enable eMMC, SDHI and SPIO NOR support
- Add camera daughterboard
* RZ/G1M (r8a7743) SoC
- Remove legacy "renesas,rcar-thermal" compatibility
* tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
ARM: dts: r8a7744-iwg20m: Add SPI NOR support
ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
ARM: dts: r8a7744: Add PCIe Controller device node
ARM: dts: r8a7744: Add xhci support
ARM: dts: r8a7744: Add MSIOF[012] support
ARM: dts: r8a7744: Add QSPI support
ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
ARM: dts: r8a7744: Add TPU support
ARM: dts: r8a7744: Add PWM SoC support
ARM: dts: r8a7744: Add IPMMU DT nodes
ARM: dts: r8a7744: Add VSP support
ARM: dts: r8a7744: add VIN dt support
ARM: dts: r8a7744: Add CMT SoC specific support
ARM: dts: r8a7744: Add thermal device to DT
ARM: dts: r8a7744: Add IRQC support
ARM: dts: r8a7744: Add CAN support
ARM: dts: r8a7744: Add audio support
ARM: dts: r8a7744: Add RWDT node
ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
ARM: dts: r8a7744: USB 2.0 host support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:01:55 +0000 (08:01 -0800)]
Merge tag 'renesas-arm64-dt2-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM64 Based SoC DT Updates for v4.21
* R-Car D3 (r8a77995) SoC based Draak board
- Add the backlight device for the LVDS1 output
* R-Car H3 (r8a7795) ES1.0 SoC
- Add missing power domains to IPMMU nodes
* R-Car M3-N (r8a77965) SoC
- Remove non-existent IPMMU-IR
* tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77995: draak: Add backlight
arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes
arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 15:59:16 +0000 (07:59 -0800)]
Merge tag 'aspeed-4.21-devicetree' of git://git./linux/kernel/git/joel/aspeed into next/dt
ASPEED device tree updates for 4.20
- New machine: Facebook Backpack-CMM BMC and flash layout
- OpenPower reference systems (Palmetto P8, Romulus P9) move to the
ColdFire based FSI driver
- Misc device tree updates from the OpenBMC project
* tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
ARM: dts: Add Facebook BMC flash layout
ARM: dts: aspeed: wspoon: Enable iio-hwmon battery
ARM: dts: aspeed: romulus: Enable iio-hwmon-battery
ARM: dts: aspeed: Enable VHUB on Romulus
ARM: dts: aspeed-palmetto: Add LPC control node
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
ARM: dts: aspeed: Romulus system can use coprocessor for FSI
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 15:43:46 +0000 (07:43 -0800)]
Merge tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux into next/dt
This device-tree pxa update brings :
- various fixes from Daniel (W=12 issues mainly)
- support for the first pxa3xx devicetree pxa board
* tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux:
ARM: dts: pxa3xx: Add Raumfeld DTS files
ARM: dts: pxa: clean up USB controller nodes
ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
ARM: dts: pxa2xx: fix hwuart memory range
ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
ARM: dts: pxa3xx: add gcu node
Signed-off-by: Olof Johansson <olof@lixom.net>
Thierry Reding [Thu, 6 Dec 2018 18:00:17 +0000 (19:00 +0100)]
arm64: tegra: Set reg property for display-hub on Tegra194
Technically the display-hub driver could access registers via the
specified region, though it practice it will do so via the display
controllers' register regions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 6 Dec 2018 18:00:16 +0000 (19:00 +0100)]
arm64: tegra: Set reg property for display-hub on Tegra186
Technically the display-hub driver could access registers via the
specified region, though it practice it will do so via the display
controllers' register regions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rob Herring [Mon, 3 Dec 2018 21:32:14 +0000 (15:32 -0600)]
dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
In preparation to convert board-level bindings to json-schema, move
various misc SoC bindings out to their own file.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 26 Sep 2018 10:44:46 +0000 (11:44 +0100)]
dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
Document the iW-RainboW-G20D-Qseven-RZG1N device tree bindings,
listing it as a supported board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 26 Sep 2018 08:21:44 +0000 (09:21 +0100)]
dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Document the iW-RainboW-G20M-RZ/G1N Qseven device tree bindings,
listing it as a supported system on module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Krishna Reddy [Wed, 17 Oct 2018 02:06:48 +0000 (19:06 -0700)]
arm64: dts: tegra186: Enable IOMMU for SDHCI
Enable IOMMU for all SDHCI controllers in Tegra186.
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 6 Dec 2018 16:50:22 +0000 (17:50 +0100)]
arm64: tegra: Enable HDA controller on Jetson TX1
The HDA controller can be used for audio playback over HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 6 Dec 2018 16:50:21 +0000 (17:50 +0100)]
arm64: tegra: Add CEC controller on Tegra194
The CEC controller found on Tegra194 can be used to control consumer
devices using the HDMI CEC pin.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 6 Dec 2018 16:50:20 +0000 (17:50 +0100)]
arm64: tegra: Enable HDA on Jetson Xavier
Enable the HDA controller on Jetson Xavier so that it can be used for
audio playback over HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sameer Pujar [Tue, 4 Dec 2018 12:14:22 +0000 (17:44 +0530)]
arm64: tegra: Add HDA controller on Tegra194
The HDA controller found on Tegra194 can be used for audio playback over
HDMI.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 6 Dec 2018 16:50:18 +0000 (17:50 +0100)]
arm64: tegra: Add CEC controller on Tegra186
The CEC controller found on Tegra186 can be used to control consumer
devices using the HDMI CEC pin.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 6 Dec 2018 16:50:17 +0000 (17:50 +0100)]
arm64: tegra: Enable HDA on Jetson TX2
Enable the HDA controller on Jetson TX2 so that it can be used for audio
playback over HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 6 Dec 2018 16:50:16 +0000 (17:50 +0100)]
arm64: tegra: Add HDA controller on Tegra186
The HDA controller found on Tegra186 can be used for audio playback over
HDMI.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Biju Das [Wed, 5 Dec 2018 09:06:52 +0000 (09:06 +0000)]
ARM: dts: r8a7744-iwg20m: Add SPI NOR support
Add support for the SPI NOR device used to boot up the system
to the iWave RZ/G1N Qseven System On Module DT.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 25 Nov 2018 14:40:30 +0000 (16:40 +0200)]
arm64: dts: renesas: r8a77995: draak: Add backlight
Add the backlight device for the LVDS1 output, in preparation for panel
support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 5 Dec 2018 09:06:51 +0000 (09:06 +0000)]
ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
are SoC specific and should be part of board dts rather than SoM dtsi. By
moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
on both of these boards with less lines of code.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Tue, 27 Nov 2018 11:56:35 +0000 (11:56 +0000)]
ARM: dts: r8a7744: Add PCIe Controller device node
Add a device node for the PCIe controller on the Renesas
RZ/G1N (r8a7744) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Tue, 27 Nov 2018 11:56:34 +0000 (11:56 +0000)]
ARM: dts: r8a7744: Add xhci support
Add a device node for the xhci controller on the Renesas
RZ/G1N (r8a7744) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Tue, 27 Nov 2018 11:56:33 +0000 (11:56 +0000)]
ARM: dts: r8a7744: Add MSIOF[012] support
Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Tue, 27 Nov 2018 11:56:31 +0000 (11:56 +0000)]
ARM: dts: r8a7744: Add QSPI support
Add the DT node for the QSPI interface to the SoC dtsi.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Tue, 27 Nov 2018 11:56:25 +0000 (11:56 +0000)]
ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
This patch adds support for the camera daughter board which is
connected to iWave's RZ/G1N Qseven carrier board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 28 Nov 2018 16:38:31 +0000 (16:38 +0000)]
ARM: dts: r8a7744: Add TPU support
Add TPU support to SoC DT.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 28 Nov 2018 16:38:30 +0000 (16:38 +0000)]
ARM: dts: r8a7744: Add PWM SoC support
Add the definitions for pwm[
0123456] to the SoC dtsi.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 28 Nov 2018 16:38:29 +0000 (16:38 +0000)]
ARM: dts: r8a7744: Add IPMMU DT nodes
Add the six IPMMU instances found in the r8a7744 to DT with a disabled
status.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 28 Nov 2018 16:38:28 +0000 (16:38 +0000)]
ARM: dts: r8a7744: Add VSP support
Add VSP support to SoC DT.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 28 Nov 2018 16:38:27 +0000 (16:38 +0000)]
ARM: dts: r8a7744: add VIN dt support
Add VIN[012] support to SoC dt.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:35 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add CMT SoC specific support
Add CMT[01] support to SoC DT.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:34 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add thermal device to DT
This patch instantiates the thermal sensor module with thermal-zone
support.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:33 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add IRQC support
Describe the IRQC interrupt controller in the r8a7744 device tree.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:32 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add CAN support
Add the definitions for can0 and can1 to the r8a7744 SoC dtsi.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:31 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add audio support
Add sound support for the RZ/G1N SoC (a.k.a. R8A7744).
This work is based on similar work done on the R8A7743 SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:30 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add RWDT node
Add a device node for the Watchdog Timer (RWDT) controller on the Renesas
RZ/G1N (r8a7744) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:29 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
Add usb dmac and hsusb device nodes on RZ/G1N SoC dtsi.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:28 +0000 (15:26 +0000)]
ARM: dts: r8a7744: USB 2.0 host support
Describe internal PCI bridge devices, USB phy device and
link PCI USB devices to USB phy.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:27 +0000 (15:26 +0000)]
ARM: dts: r8a7744-iwg20m: Enable SDHI0 controller
Enable the SDHI0 controller on iWave RZ/G1N Qseven System On Module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:26 +0000 (15:26 +0000)]
ARM: dts: r8a7744-iwg20m: Add eMMC support
Add eMMC support for iWave RZ/G1N Qseven System On Module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:25 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add MMC node
Add MMC node to the DT of the r8a7744 SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:24 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add SDHI nodes
Add SDHI nodes to the DT of the r8a7744 SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:23 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add I2C and IIC support
Add the I2C[0-5] and IIC[0,1,3] devices nodes to the R8A7744 device tree.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:22 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add [H]SCIF{A|B} support
Describe [H]SCIF{|A|B} ports in the R8A7744 device tree.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:21 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add SMP support
Add DT node for the Advanced Power Management Unit (APMU), add the
second CPU core, and use "renesas,apmu" as "enable-method".
Also add cpu1 phandle node to the PMU interrupt-affinity property.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:20 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add Ethernet AVB support
Add Ethernet AVB support for R8A7744 SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:19 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add GPIO support
Describe GPIO blocks in the R8A7744 device tree.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:18 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add SYS-DMAC support
Describe SYS-DMAC0/1 in the R8A7744 device tree.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:17 +0000 (15:26 +0000)]
ARM: dts: r8a7744-iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1N
Add support for iWave RainboW-G20D-Qseven board based on RZ/G1N.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:16 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Initial SoC device tree
Basic support for the RZ/G1N (R8A7744) SoC. Added placeholders
to avoid compilation error with the common platform code.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:15 +0000 (15:26 +0000)]
ARM: dts: r8a7744-iwg20m: Add iWave RZ/G1N Qseven SOM
Add support for iWave RZ/G1N Qseven System On Module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Mon, 3 Dec 2018 15:04:47 +0000 (16:04 +0100)]
ARM: dts: r8a7743: Remove legacy "renesas,rcar-thermal" compatibility
The thermal hardware description for the RZ/G1M SoC was added to its DTS
after the introduction of support for thermal zones, and included a
thermal-zones node from the beginning.
Hence there is no need to claim compatibility with
"renesas,rcar-thermal", which would be needed only for backwards
compatibility with kernels predating thermal zone support.
Fixes: 6c76b4f7d89e89f0 ("ARM: dts: r8a7743: Add thermal device to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Daniel Mack [Fri, 30 Nov 2018 17:55:43 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: Add Raumfeld DTS files
This patch adds a set of DTS files that support all PXA3xx based Raumfeld
audio hardware devices.
Common nodes are factored out into 'common' and 'tuneable-clock' include
files to keep the top-level DTS files smaller.
Signed-off-by: Daniel Mack <daniel@zonque.org>
[Robert: Reordered Makefile in alphabetical order]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Olof Johansson [Mon, 3 Dec 2018 21:04:49 +0000 (13:04 -0800)]
Merge tag 'qcom-dts-for-4.21' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.21
* Add entry for Qualcomm TSENS thermal drivers
* Update msm8974 thermal entries
* Fix msm8974 Hammerhead magnetometer gpios
* Add SoC specific compatibles for SDHC nodes
* Remove Arrow SD600 eval board
* tag 'qcom-dts-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: Remove Arrow SD600 eval board
ARM: dts: qcom: Add SoC-specific string for sdhci-msm-v4 nodes
ARM: dts: qcom: msm8974-hammerhead: correct gpios property on magnetometer
ARM: dts: msm8974: thermal: Add "qcom,sensors" property
ARM: dts: msm8974: thermal: split address space into two
MAINTAINERS: Add entry for Qualcomm TSENS thermal drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 3 Dec 2018 21:04:14 +0000 (13:04 -0800)]
Merge tag 'qcom-arm64-for-4.21' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.21
* Add QCS404 base platform and nodes
* Add QCS404 EVB boards
* Add external SD and dependencies for MSM8998-mtp
* Add default scm compatible for MSM8998
* Fix XO clk name on MSM8998
* Add prng-ee nodes for SDM845 and MSM8996
* Add ADC die temp node for pm8998
* Fix documentation on QCOM ADC sample
* tag 'qcom-arm64-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (34 commits)
arm64: dts: qcom: msm8998: Fix compatible of scm node
arm64: dts: qcom: msm8998: Add SDC2 control pins
arm64: dts: qcom: msm8998-mtp: Add external SD
arm64: dts: qcom: msm8998: Add SDCC2
arm64: dts: qcom: msm8998: correct xo clock name
arm64: dts: qcom: pms405: Add pon and pwrkey nodes
arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2
arm64: dts: qcom: qcs404: Add BAM DMA node
arm64: dts: qcom: qcs404: add prng-ee node
arm64: dts: qcom: qcs404: Add remoteproc nodes
arm64: dts: qcom: qcs404: Add scm firmware node
arm64: dts: qcom: pms405: add gpios
arm64: dts: qcom: pms405: add rtc node
arm64: dts: qcom: qcs404: add spmi node
arm64: dts: qcom: pms405: add spmi node
arm64: dts: qcom: qcs404: Add sdcc1 node
arm64: dts: qcom: qcs404: Add TLMM pinctrl node
arm64: dts: qcom: qcs404: add smp2p nodes
arm64: dts: qcom: qcs404: Add PMS405 RPM regulators
arm64: dts: qcom: qcs404: Add RPM GLINK related nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Sun, 2 Dec 2018 11:38:48 +0000 (12:38 +0100)]
ARM: mmp2: DT: be compatible with mrvl,mmp2
There are more boards that can work with mmp2-dt than just Brownstone.
The OLPC XO-1.75 device tree root is compatible with "mrvl,mmp2" only.
The "mrvl,mmp2-brownstone" string is safe to remove: the Brownstone
device tree contains the "mrvl,mmp2" compatible string too.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 3 Dec 2018 20:50:41 +0000 (12:50 -0800)]
Merge tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.21, please pull the following:
- Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
license and adds proper SPDX license tags in the process
- Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
BCM4708 plus two BCM4360 and BCM4331 radios
- Phil documents and updates the vchiq mailbox compatible string in
order to establish a correct agreement between the Raspberry Pi
firmware and the ARM CPU's view of what an ARM CPU cache line size is,
he also fixes the mailbox "reg" property to be correctly expressed in
bytes
- Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags
- Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
he also does a bit of refactoring of aliases for the Northstar Plus
DTS files
* tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Describe Northstar pins mux controller
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: dts: bcm283x: Correct mailbox register sizes
ARM: dts: bcm283x: Correct vchiq compatible string
dt-bindings: soc: Document "brcm,bcm2836-vchiq"
ARM: dts: NSP: Move aliases to bcm-nsp.dtsi
ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
ARM: dts: BCM63xx: Enable SATA AHCI and PHY for BCM963138DVT
ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the GPL 2.0+ / MIT
Signed-off-by: Olof Johansson <olof@lixom.net>
Thierry Reding [Wed, 28 Nov 2018 17:26:34 +0000 (18:26 +0100)]
arm64: tegra: Add temperature sensor on P2888
The P2888 processor module contains a TI TMP451 temperature sensor with
two channels. These are used to measure the temperatures at different
locations on the module.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 17:19:57 +0000 (18:19 +0100)]
arm64: tegra: Add gpio-keys on Jetson Xavier
The power and force recovery buttons found on Jetson Xavier are hooked
up to two Tegra GPIOs. The power button can also function as a wake-up
source.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 17:19:56 +0000 (18:19 +0100)]
arm64: tegra: Add AON GPIO controller on Tegra194
The AON GPIO controller is in an always-on power partition and typically
provides pins for functions that need to always work, such as the power
key for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 16:50:50 +0000 (17:50 +0100)]
arm64: tegra: p2888: Enable on-die RTC
The on-die RTC isn't hooked up to a backup battery, so it isn't useful
to track time across reboots, but as long as power remains enabled, it
keeps track of time accurately and can be used to wake the system from
sleep, for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 16:50:49 +0000 (17:50 +0100)]
arm64: tegra: Add RTC support on Tegra194
The RTC on Tegra194 is very similar to the RTC on earlier generations.
One notable exception is that the source clock is now the 32 kHz clock
instead of a dedicated RTC clock and the RTC alarm is a wake event and
can be used to wake the system from sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 17:19:55 +0000 (18:19 +0100)]
arm64: tegra: Enable PMC wake events on Tegra194
Wake events are a feature that allows the interrupt and GPIO controllers
to be powered off as part of system sleep. The PMC which is always on is
monitoring these wake events and can power up subsequent controllers as
necessary to process them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 16:49:41 +0000 (17:49 +0100)]
arm64: tegra: p3310: Enable on-die RTC
The on-die RTC isn't hooked up to a backup battery, so it isn't useful
to track time across reboots, but as long as power remains enabled, it
keeps track of time accurately and can be used to wake the system from
sleep, for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 16:49:40 +0000 (17:49 +0100)]
arm64: tegra: Add RTC support on Tegra186
The RTC on Tegra186 is very similar to the RTC on earlier generations.
One notable exception is that the source clock is now the 32 kHz clock
instead of a dedicated RTC clock and the RTC alarm is a wake event and
can be used to wake the system from sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 17:19:54 +0000 (18:19 +0100)]
arm64: tegra: Enable PMC wake events on Tegra186
Wake events are a feature that allows the interrupt and GPIO controllers
to be powered off as part of system sleep. The PMC which is always on is
monitoring these wake events and can power up subsequent controllers as
necessary to process them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 28 Nov 2018 16:47:25 +0000 (17:47 +0100)]
arm64: tegra: Fix power key interrupt type on Jetson TX2
In order for the correct interrupt type to be configured, the event
action for the power key needs to be "asserted".
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 23 Nov 2018 12:18:39 +0000 (13:18 +0100)]
arm64: tegra: p2972: Enable the CPU, GPU and AUX thermal zones
Enable these thermal zones to be able to monitor their temperatures and
control the fan to cool down the system if necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 23 Nov 2018 12:18:38 +0000 (13:18 +0100)]
arm64: tegra: Add thermal zones on Tegra194
The NVIDIA Tegra194 SoC defines six thermal zones. Define all of them in
device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 23 Nov 2018 12:31:38 +0000 (13:31 +0100)]
arm64: tegra: Enable HDMI on P2972-0000
Add the 5V HDMI regulator and hook up the VDD_1V0 and VDD_1V8HS supplies
from the PMIC to the display block. Also enable the display hub which is
responsible for instantiating the display controllers. Finally, enable
the third SOR that drives the TMDS signals to the HDMI connector.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 23 Nov 2018 12:31:37 +0000 (13:31 +0100)]
arm64: tegra: Add VIC support on Tegra194
Tegra194 has a version of VIC that is very similar to that on Tegra186.
Add the device tree node for it that is enabled by default.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 23 Nov 2018 12:31:36 +0000 (13:31 +0100)]
arm64: tegra: Add display support on Tegra194
Tegra194 contains a display architecture very similar to that found on
the Tegra186. One notable exception is that DSI is no longer a supported
output. Instead there are four display controllers and four SORs (with a
DPAUX associated to each of them) that can drive HDMI or DP.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tao Ren [Fri, 9 Nov 2018 00:50:46 +0000 (16:50 -0800)]
ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
Add initial version of device tree file for Facebook Backpack CMM
(Chasis Management Module) ast2500 BMC.
Signed-off-by: Tao Ren <taoren@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tao Ren [Fri, 9 Nov 2018 00:50:34 +0000 (16:50 -0800)]
ARM: dts: Add Facebook BMC flash layout
This is the layout used by Facebook BMC systems. It describes the fixed
flash layout of a 32MB mtd device.
Signed-off-by: Tao Ren <taoren@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Matt Spinler [Fri, 12 Oct 2018 15:29:15 +0000 (10:29 -0500)]
ARM: dts: aspeed: wspoon: Enable iio-hwmon battery
The BMC can read the RTC battery voltage via ADC
channel 12.
Signed-off-by: Matt Spinler <spinler@linux.vnet.ibm.com>
Reviewed-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Lei YU [Wed, 22 Aug 2018 07:47:28 +0000 (15:47 +0800)]
ARM: dts: aspeed: romulus: Enable iio-hwmon-battery
Add iio-hwmon-battery using adc channel 12 and enable adc to make
adc running. This channel is used to read RTC battery voltage.
Note with Romulus hardware design, it requires GPIOR3 to be pulled
high to read the voltage, otherwise the reading is 0.
When GPIOR3 is high, it consumes battery and impacts the battery life.
So it is left for user space to toggle the GPIO when trying to read the
voltage.
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Wed, 4 Jul 2018 06:25:41 +0000 (16:25 +1000)]
ARM: dts: aspeed: Enable VHUB on Romulus
The Romulus USB bus is connected to the Power9's PCIe USB controller.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Mon, 27 Aug 2018 23:15:19 +0000 (16:15 -0700)]
ARM: dts: aspeed-palmetto: Add LPC control node
This adds the required LPC node with phandles to the reserved memory
region and the mtd device.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Benjamin Herrenschmidt [Tue, 24 Jul 2018 04:24:04 +0000 (14:24 +1000)]
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
This allows userspace to switch away from bitbanging to use kernel
FSI with the coprocessor.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Benjamin Herrenschmidt [Tue, 24 Jul 2018 04:24:03 +0000 (14:24 +1000)]
ARM: dts: aspeed: Romulus system can use coprocessor for FSI
This replaces the FSI compatible with the ColdFire FSI compatible.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Daniel Mack [Sat, 1 Dec 2018 13:54:51 +0000 (14:54 +0100)]
ARM: dts: pxa: clean up USB controller nodes
PXA25xx SoCs don't have a USB controller, so drop the node from the
common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated
node already anyway.
While at it, unify the names for the nodes across all pxa platforms.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Sergey Yanovich <ynvich@gmail.com>
Link: https://patchwork.kernel.org/patch/8375421/
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:42 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
The clock controller node does not need a unit slave designator as it does
not have a reg property. Also, remove the underscore from the name.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:41 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
These are devices on the PXA bus, so make the device tree structure
reflect that.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:39 +0000 (18:55 +0100)]
ARM: dts: pxa2xx: fix hwuart memory range
The memory range for the hwuart is at 0x41600000, not 0x41100000.
This also solves a conflict with the MMC controller node.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:38 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
The pinctrl node does not have any children, so the #address-cells and #size-cells
properties are not needed.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Fri, 30 Nov 2018 17:55:37 +0000 (18:55 +0100)]
ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
PXA is single-core only, so this node will not have enumerable children.
Drop the #address-cells and #size-cells properties to squelch a dtc warning.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Daniel Mack [Mon, 5 Nov 2018 19:18:27 +0000 (20:18 +0100)]
ARM: dts: pxa3xx: add gcu node
Add a device node for hardware graphic acceleration.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Olof Johansson [Fri, 30 Nov 2018 23:46:17 +0000 (15:46 -0800)]
Merge tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoCs DT updates for 4.21
* Hi3660 SoC and related boards:
- Standardize LED labels and triggers for the hikey960 board
- Add the missing cooling-cells property for the cpu nodes
- Add all cpus into the cooling maps
* Hi3670 SoC and related boards:
- Add clock nodes and update the uart clock
- Add Pinctrl, GPIO and uart nodes
- Enable uart and add GPIO line names for the hikey970 board
* Hi3798 SoC and related boards:
- Standardize LED labels and triggers for the poplar board
* Hi6220 SoC and related boards:
- Standardize LED labels and triggers for the hikey board
- Add all cpus into the cooling maps
* tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi:
ARM64: dts: hisilicon: Add all CPUs in cooling maps
arm64: dts: hi3660: Add missing cooling device properties for CPUs
arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey970: Add GPIO line names
arm64: dts: hisilicon: hikey970: Enable on-board UARTs
arm64: dts: hisilicon: hi3670: Add UART nodes
arm64: dts: hisilicon: hi3670: Add GPIO controller support
arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board
arm64: dts: hisilicon: Source SoC clock for UART6
arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Fri, 30 Nov 2018 01:52:51 +0000 (19:52 -0600)]
ARM: dts: aspeed: add missing memory unit-address
The base aspeed-g5.dtsi already defines a '/memory@
80000000' node, so
'/memory' in the board files create a duplicate node. We're probably
getting lucky that the bootloader fixes up the memory node that the
kernel ends up using. Add the unit-address so it's merged with the base
node.
Found with DT json-schema checks.
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Fri, 30 Nov 2018 01:05:47 +0000 (19:05 -0600)]
ARM: dts: realview-pbx: Fix duplicate regulator nodes
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:18:30 +0000 (15:18 -0800)]
Merge tag 'amlogic-dt64' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt
arm64: Amlogic DT updates for v4.21
Some highlights:
- new boards: Phicomm N1 (S905D), Libretech S805-AC
- fixes for pinmux pad bias, GPIO line names
- AXG: enable SCPI, add secure monitor
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits)
arm64: dts: meson-gx: Add Internal Clock Measurer node
arm64: dts: amlogic: Add all CPUs in cooling maps
arm64: dts: meson: add libretech aml-s805x-ac board
dt-bindings: arm: amlogic: add libretech aml-s805x-ac bindings
dt-bindings: arm: amlogic: Add Phicomm N1
dt-bindings: Add vendor prefix for PHICOMM Co., Ltd.
arm64: dts: meson-gxl: add support for phicomm n1
arm64: dts: meson: consistently disable pin bias
arm64: dts: meson: disable pad bias for mmc pinmuxes
arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux
arm64: dts: meson: s400: add bcm bluetooth device
arm64: dts: meson: p230: disable advertisement EEE for GbE.
arm64: dts: meson-axg: enable SCPI
Documentation: bindings: Add missing Amlogic SCPI sensor bindings
arm64: dts: meson-axg: correct sram shared mem unit-address
arm64: dts: meson-axg: fix mailbox address
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
arm64: dts: meson-axg: add secure monitor
arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart
arm64: dts: meson-gxl-khadas-vim: fix GPIO lines names
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:18:03 +0000 (15:18 -0800)]
Merge tag 'amlogic-dt' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 32-bit DT updates for v4.21
- support more timers on meson8
- add the stdout-path property on several boards
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: add the clock inputs for the Meson timer
ARM: dts: meson: add the TIMER B/C/D interrupts
ARM: dts: meson: consistently disable pin bias
ARM: dts: meson8b: mxq: add the /chosen/stdout-path property
ARM: dts: meson8: minix-neo-x8: add the /chosen/stdout-path property
ARM: dts: meson6: atv1200: add the /chosen/stdout-path property
dt-bindings: timer: meson6_timer: document the clock inputs
dt-bindings: timer: meson6_timer: document all interrupts
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:17:33 +0000 (15:17 -0800)]
Merge tag 'omap-for-v4.21/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.21 merge window
These changes mostly configure pinctrl for am437x-gp-evm. There is
also non-critical fix for a comment for Clang, and we enable earlycon
for am3517-evm.
* tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x-gp-evm: Add sleep state for beeper pins
ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake
ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states
ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins
ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins
ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin
ARM: dts: am3517-evm: Enable earlycon stdout path
ARM: dts: omap3-gta04: Fix comment block
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:16:42 +0000 (15:16 -0800)]
Merge tag 'vexpress-drm-arm-soc' of git://git./linux/kernel/git/linusw/linux-integrator into next/dt
Versatile Express DTS update for DRM:
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.
* tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Modernize the Vexpress PL111 integration
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:14 +0000 (18:53 +0100)]
ARM: dts: mmp2: Add SSP controllers
Despite Marvel keeps their base addresses secret there's a good chance
they're actually correct.
SSP1 and SSP3 bases were taken from OLPC 1.75: OpenFirmware and kernel
respectively. SSP2 and SSP4 addresses are from James Cameron who actually
has a copy of the data sheet.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:13 +0000 (18:53 +0100)]
ARM: dts: mmp2: add USB OTG host controller
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
projects / linux.git / log