scsi: target: core: Make hw_max_sectors store the sectors amount in blocks

By default, hw_max_sectors stores its value in 512 blocks in iblock,
despite the fact that the block size can be 4096 bytes. Change
hw_max_sectors to store the number of sectors in hw_block_size blocks.

Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20221114102500.88892-3-a.kovaleva@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Send max transfer length in blocks

A MAXIMUM TRANSFER LENGTH value indicates the maximum transfer length in
logical blocks that the device server accepts for a single command. Fix
function sending the length in sectors instead of blocks.

This patch also removes the special casing for fileio in block_size_store
since this logic in now unified in spc_emulate_evpd_b0() for all backends.

Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20221114102500.88892-2-a.kovaleva@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Remove linux/msi.h include

Nothing in this file needs anything from linux/msi.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221113202428.436270297@linutronix.de
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update lpfc version to 14.2.0.9

Update lpfc version to 14.2.0.9.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix crash involving race between FLOGI timeout and devloss handler

When a FLOGI completes with a sequence timeout error, a freed kref ptr
dereference crash can occur due to a timing race involving ndlp referencing
in lpfc_dev_loss_tmo_callbk.

Fix by ensuring the driver accounts for an outstanding FLOGI when dev_loss
is active.  Also, don't remove the HBA_FLOGI_OUTSTANDING flag when the
FLOGI is retried to allow the driver to handle the reference counts
correctly in lpfc_dev_loss_tmo_handler.

Reported-by: Dietmar Hahn <dietmar.hahn@fujitsu.com>
Tested-by: Dietmar Hahn <dietmar.hahn@fujitsu.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix MI capability display in cmf_info sysfs attribute

The dynamic mi_ver value holds the currently configured MI setting.  mi_ver
was being displayed as part of the cmf_info sysfs attribute, when the
output string meant to display MI capabilities instead.

Add a mi_cap member in the lpfc_pc_sli4_params structure that will store MI
capabilities during initialization so that cmf_info prints out capabilities
instead of current configuration.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Correct bandwidth logging during receipt of congestion sync WCQE

The lpfc_cmf_timer adjusts phba->cmf_link_byte_count periodically and can
artifically inflate bandwidth percent.

During bandwidth calculation, correct for this by setting a cap of logging
a maximum of 100%.

Bandwidth calculation is only used for display under LOG_CGN_MGMT so there
is no expectation of impacts on performance.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix WQ|CQ|EQ resource check

Adapter configurations with limited EQ resources may fail to initialize.

Firmware resources are queried in lpfc_sli4_read_config().  The driver
parameters cfg_irq_chann and cfg_hdw_queue are adjusted from defaults if
constrained by firmware resources.

The minimum resource check includes a special allocation for queues such as
ELS, MBOX, NVME LS. However the additional reservation was also incorrectly
applied to EQ resources.

Reordered WQ|CQ|EQ resource checks to apply the special allocation
adjustment to WQ and CQ resources only.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Replace one-element array with flexible-array member

One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct fdmi_attr_s.

Important to mention is that doing a build before/after this patch results
in no binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/209
Link: https://github.com/KSPP/linux/issues/79
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/Y3P1rEEBq7HzJygq@work
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: Remove redundant variable ev_qual

Variable ev_qual is being assigned and modified but the end result is never
used. The variable is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221111170824.558250-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Use memset_startat() helper

Use memset_startat() helper to simplify the code, no functional changes in
this patch.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221111074310.132125-1-xiujianfeng@huawei.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: Fix a warning in resp_write_scat()

As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.

Call trace:

sg_ioctl
 sg_ioctl_common
   scsi_ioctl
    sg_scsi_ioctl
     blk_execute_rq
      blk_mq_sched_insert_request
       blk_mq_run_hw_queue
        __blk_mq_delay_run_hw_queue
         __blk_mq_run_hw_queue
          blk_mq_sched_dispatch_requests
           __blk_mq_sched_dispatch_requests
            blk_mq_dispatch_rq_list
             scsi_queue_rq
              scsi_dispatch_cmd
               scsi_debug_queuecommand
                schedule_resp
                 resp_write_scat

If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail.  It creates a stack trace and messes up dmesg.  The
user controls the size here so if they specify a too large size it will
fail.

Add __GFP_NOWARN in order to avoid too large allocation warning.  This is
detected by static analysis using smatch.

Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Change version to 2.1.20-035

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793533417.322537.3074216622272955440.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Initialize feature section info

Initialize features to 0 before processing.

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793532902.322537.2436075977808555348.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add controller cache flush during rmmod

Add in a call to flush the controller cache during driver removal.

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793532388.322537.878022136408270892.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Correct device removal for multi-actuator devices

Correct device count for multi-actuator drives which can cause kernel
panics.

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kumar Meiyappan <Kumar.Meiyappan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793531872.322537.9003385780343419275.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Change sysfs raid_level attribute to N/A for controllers

Change the sysfs raid_level attribute from "RAID-0" to N/A.

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowan <mike.mcgowan@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793531357.322537.8639138137605612362.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Correct max LUN number

Correct maximum LUN number for multi-actuator devices.

When multi-actuator support was added to smartpqi, the maximum number of
LUNs supported for multi-actuator devices was supposed to be changed from
unlimited to 256, but the setting was inadvertently left at unlimited.

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793530842.322537.816949081443241857.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Add new controller PCI IDs

All PCI ID entries in Hex.
Add PCI IDs for ByteDance controllers:
                                            VID  / DID  / SVID / SDID
                                            ----   ----   ----   ----
    ByteHBA JGH43024-8                      9005 / 028f / 1e93 / 1000
    ByteHBA JGH43034-8                      9005 / 028f / 1e93 / 1001
    ByteHBA JGH44014-8                      9005 / 028f / 1e93 / 1002

Add PCI IDs for new Inspur controllers:
                                            VID  / DID  / SVID / SDID
                                            ----   ----   ----   ----
    INSPUR RT0800M7E                        9005 / 028f / 1bd4 / 0086
    INSPUR RT0800M7H                        9005 / 028f / 1bd4 / 0087
    INSPUR RT0804M7R                        9005 / 028f / 1bd4 / 0088
    INSPUR RT0808M7R                        9005 / 028f / 1bd4 / 0089

Add PCI IDs for new FAB A controllers:
                                            VID  / DID  / SVID / SDID
                                            ----   ----   ----   ----
    Adaptec SmartRAID 3254-16e /e           9005 / 028f / 9005 / 1475
    Adaptec HBA 1200-16e                    9005 / 028f / 9005 / 14c3
    Adaptec HBA 1200-8e                     9005 / 028f / 9005 / 14c4

Add H3C controller PCI IDs:
                                            VID  / DID  / SVID / SDID
                                            ----   ----   ----   ----
    H3C H4508-Mf-8i                         9005 / 028f / 193d / 110b

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793530327.322537.6056884426657539311.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Convert to host_tagset

Add support for host_tagset.

Also move the reserved command slots to the end of the pool to eliminate an
addition operation for every SCSI request.

This patch was originally authored by Hannes Reinecke here:

Link: https://lore.kernel.org/linux-block/20191126131009.71726-8-hare@suse.de/
But we NAKed this patch because we wanted to fully test multipath
failover operations.

Suggested-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com>
Reviewed-by: Mike McGowen <Mike.McGowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/166793529811.322537.3294617845448383948.stgit@brunhilda
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Remove redundant pointer 'lp'

Pointer lp is being initialized and incremented but the result is never
read. The pointer is redundant and can be removed.

Once lp is removed, pcmd is not longer used. So remove pcmd as well

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Link: https://lore.kernel.org/r/20221108183620.93978-1-jsmart2021@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Use kstrtobool() instead of strtobool()

strtobool() is the same as kstrtobool().  However, the latter is more used
within the kernel.

In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.

While at it, include the corresponding header file (<linux/kstrtox.h>)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fcddc0a53b4fc6e3c2e93592d3f61c5c63121855.1667336095.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Remove unused variable 'unit_serial_len'

Variable 'unit_serial_len' is just being assigned and it's never used
anywhere else. Remove it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221101105326.31037-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Remove unused variable 'n'

Variable 'n' is just being incremented and it's never used anywhere
else. Remove it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221101123235.52152-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove unused variable 'found_devs'

Variable 'found_devs' is just being incremented and it's never used
anywhere else. Remove it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221101104733.30363-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Fix set-but-not-used variable warnings

Fix the following two compiler warnings:

drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’:
drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
  171 |         uint8_t bail;
      |                 ^~~~
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’:
drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
 2023 |         uint8_t bail;
      |                 ^~~~

Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes: feafb7b1714c ("[SCSI] qla2xxx: Fix vport delete issues")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Rework bfad_reset_sdev_bflags()

Since commit f93ed747e2c7 ("scsi: core: Release SCSI devices
synchronously") it is no longer allowed to call scsi_device_put() from
atomic context.

Rework bfad_reset_sdev_bflags() such that scsi_device_put() is no longer
called. This fixes the following smatch warning:

drivers/scsi/bfa/bfad_bsg.c:2551 bfad_iocmd_lunmask_reset_lunscan_mode() warn: sleeping in atomic context

bfad_iocmd_lunmask() <- disables preempt
-> bfad_iocmd_lunmask_reset_lunscan_mode()
   -> scsi_device_put()

Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224728.2607760-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Convert bfad_reset_sdev_bflags() from a macro into a function

Before modifying bfad_reset_sdev_bflags(), convert it from a macro into a
function.

Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224728.2607760-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: alua: Move a scsi_device_put() call out of alua_rtpg_select_sdev()

Move a scsi_device_put() call from alua_rtpg_select_sdev() to its
callers. Fixes the following smatch complaint:

drivers/scsi/device_handler/scsi_dh_alua.c:853 alua_rtpg_select_sdev() warn: sleeping in atomic context

alua_rtpg_work() <- disables preempt
-> alua_rtpg_select_sdev()
   -> scsi_device_put()

Cc: Hannes Reinecke <hare@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224728.2607760-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: alua: Move a scsi_device_put() call out of alua_check_vpd()

Fix the following smatch warning:

drivers/scsi/device_handler/scsi_dh_alua.c:1013 alua_rtpg_queue() warn: sleeping in atomic context

alua_check_vpd() <- disables preempt
-> alua_rtpg_queue()
   -> scsi_device_put()

Cc: Hannes Reinecke <hare@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224728.2607760-2-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Remove check_upiu_size() from ufshcd.h

Commit 68078d5cc1a5 ("[SCSI] ufs: Set fDeviceInit flag to initiate device
initialization") added check_upiu_size(), but no caller.

Cc: Dolev Raviv <draviv@codeaurora.org>
Link: https://lore.kernel.org/r/20221103055349epcms2p338f2550c2dd78d00231a83b24719a3d4@epcms2p3
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: elx: libefc: Fix second parameter type in state callbacks

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function pointer
prototype to make sure the call target is valid to help mitigate ROP
attacks. If they are not identical, there is a failure at run time, which
manifests as either a kernel panic or thread getting killed. A proposed
warning in clang aims to catch these at compile time, which reveals:

  drivers/scsi/elx/libefc/efc_node.c:811:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
                  ctx->current_state = state;
                                    ^ ~~~~~
  drivers/scsi/elx/libefc/efc_node.c:878:21: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          node->nodedb_state = state;
                            ^ ~~~~~
  drivers/scsi/elx/libefc/efc_node.c:905:6: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' from 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') [-Werror,-Wincompatible-function-pointer-types-strict]
                  pf = node->nodedb_state;
                    ^ ~~~~~~~~~~~~~~~~~~

  drivers/scsi/elx/libefc/efc_device.c:455:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
                  node->nodedb_state = __efc_d_init;
                                    ^ ~~~~~~~~~~~~

  drivers/scsi/elx/libefc/efc_sm.c:41:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict]
                  ctx->current_state = state;
                                    ^ ~~~~~

The type of the second parameter in the prototypes of ->current_state() and
->nodedb_state() ('u32') does not match the implementations, which have a
second parameter type of 'enum efc_sm_event'. Update the prototypes to have
the correct second parameter type, clearing up all the warnings and CFI
failures.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221102161906.2781508-1-nathan@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Introduce ufshcd_abort_all()

Move the code for aborting all SCSI commands and TMFs into a new function.
This patch makes the ufshcd_err_handler() easier to read. Except for adding
more logging, this patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031183433.2443554-1-bvanassche@acm.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: BusLogic: Remove variable 'adapter_count'

Variable 'adapter_count' is just being incremented and it's never used
anywhere else. Remove it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221031160512.872153-1-colin.i.king@gmail.com
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: message: fusion: Remove variable 'where'

Variable 'where' is just being incremented and it's never used
anywhere else. Remove it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221031154538.870223-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: NCR5380: Fix repeated words in comment

Delete the redundant word 'the'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20221028133708.60030-1-yuanjilin@cdjrlc.com
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Refactor ufshcd_hba_enable()

Use "if error return" style in ufshcd_hba_enable().  No functional change.

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20221028073553epcms2p6dc4f8bdbebdc8f96f43fc4197b3edd0c@epcms2p6
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: MAINTAINERS: Make Xiang Chen HiSilicon SAS controller driver maintainer

I am soon leaving Huawei, so will no longer maintain this driver. However I
will stay active in upstream Linux storage domain.

Xiang Chen has worked on the driver for as long as I have and has good
knowledge of the driver, so should do a good job.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666784008-125519-1-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Drop !task check in pm8001_abort_task()

In commit 0b639decf651 ("scsi: pm8001: Modify task abort handling for SATA
task"), code was introduced to dereference "task" pointer in
pm8001_abort_task(). However there was a pre-existing later check for
"!task", which spooked the kernel test robot.

Function pm8001_abort_task() should never be passed NULL for "task"
pointer, so remove that check. Also remove the "unlikely" hint, as this is
not fastpath code.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666781764-123090-1-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Use is_visible to control UFS unit descriptor sysfs nodes

UFS Boot and Device W-LUs do not have unit descriptors and RPMB does not
support WB. Use is_visible() to control which nodes are visible and which
are not.

Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20221025222430.277768-4-beanhuo@iokpp.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Arthur Simchaev <arthur.simchaev@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Clean up ufshcd_slave_alloc()

Combine ufshcd_get_lu_power_on_wp_status() and ufshcd_set_queue_depth()
into one single ufshcd_lu_init(), so that we only need to read the LUN
descriptor once.

Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20221025222430.277768-3-beanhuo@iokpp.de
Reviewed-by: Arthur Simchaev <arthur.simchaev@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Revert "WB is only available on LUN #0 to #7"

Ccommit d3d9c4570285 ("scsi: ufs: Fix memory corruption by
ufshcd_read_desc_param()") has properly fixed stack overflow issue.

As a result, commit a2fca52ee640 ("scsi: ufs: WB is only available on LUN
#0 to #7") is no longer required. Revert it.

Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20221025222430.277768-2-beanhuo@iokpp.de
Reviewed-by: Arthur Simchaev <arthur.simchaev@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pcmcia: nsp_cs: Remove unused variable i

Variable i is just being incremented and it's never used anywhere else. The
variable and the increment are redundant so remove it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221024141101.2161167-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Print events for WLUN suspend and resume failures

WLUN suspend and resume events are currently not handled by
ufshcd_print_evt_hist(). Add the missing events.

Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20221024120602.30019-1-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Dynamically set DPO and FUA in usage_bits

libiscsi tests check the support of DPO & FUA bits in usage bits of RSOC
response.  This patch adds support for dynamic usage bits for each opcode.
Set support of DPO & FUA bits in usage_bits of RSOC response depending on
support DPOFUA in the backstore device.

Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-7-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Check emulate_3pc for RECEIVE COPY

RECEIVE COPY RESULTS is an opcode from 3rd party copy command set and shall
be rejected if emulate_3pc attribute is off like EXTENDED COPY.

Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-6-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Add emulate_rsoc attribute

Allow support for RSOC to be turned off via the emulate_rsoc attibute.
This is just for testing purposes.

Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-5-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Dynamic opcode support in RSOC

Report supported opcodes depending on a dynamic device configuration.

Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-4-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Add list of opcodes for RSOC

Fill the strucures for supported opcodes and usage bits that are reported
in REPORT SUPPORTED OPERATION CODES command response.

Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-3-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Add support for RSOC command

Add support for REPORT SUPPORTED OPERATION CODES command according to SPC4.

Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Fix a deadlock between PM and the SCSI error handler

The following deadlock has been observed on multiple test setups:

 * ufshcd_wl_suspend() is waiting for blk_execute_rq(START STOP UNIT) to
   complete while ufshcd_wl_suspend() holds host_sem.

 * The SCSI error handler is activated, changes the host state to
   SHOST_RECOVERY, ufshcd_eh_host_reset_handler() and ufshcd_err_handler()
   are called and the latter function tries to obtain host_sem.

This is a deadlock because blk_execute_rq() can't execute SCSI commands
while the host is in the SHOST_RECOVERY state and because the error handler
cannot make progress because host_sem is held by another thread.

Fix this deadlock as follows:

 * Fail attempts to suspend the system while the SCSI error handler is in
   progress by setting the SCMD_FAIL_IF_RECOVERING flag for START STOP UNIT
   commands.

 * If the system is suspending and a START STOP UNIT command times out,
   handle the SCSI command timeout from inside the context of the SCSI
   timeout handler instead of activating the SCSI error handler.

The runtime power management code is not affected by this deadlock since
hba->host_sem is not touched by the runtime power management functions in
the UFS driver.

Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Introduce the function ufshcd_execute_start_stop()

Open-code scsi_execute() because a later patch will modify scmd->flags and
because scsi_execute() does not support setting scmd->flags. No
functionality is changed.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-10-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Track system suspend / resume activity

Add a new boolean variable that tracks whether the system is suspending,
suspended or resuming. This information will be used in a later commit to
fix a deadlock between the SCSI error handler and the suspend code.

Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Try harder to change the power mode

Instead of only retrying the START STOP UNIT command if a unit attention is
reported, repeat it if any SCSI error is reported by the device or if the
command timed out.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Reduce the START STOP UNIT timeout

Reduce the START STOP UNIT command timeout to one second since on Android
devices a kernel panic is triggered if an attempt to suspend the system
takes more than 20 seconds. One second should be enough for the START STOP
UNIT command since this command completes in less than a millisecond for
the UFS devices I have access to.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Use 'else' in ufshcd_set_dev_pwr_mode()

Convert if (ret) { ... } if (!ret) { ... } into
if (ret) { ... } else { ... }.

Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Remove an outdated comment

Although the host lock had to be held by ufshcd_clk_scaling_start_busy()
callers when that function was introduced, that is no longer the case
today. Hence remove the comment that claims that callers of this function
must hold the host lock.

Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Support failing requests while recovering

The current behavior for SCSI commands submitted while error recovery is
ongoing is to retry command submission after error recovery has finished.
See also the scsi_host_in_recovery() check in scsi_host_queue_ready(). Add
support for failing SCSI commands while host recovery is in progress. This
functionality will be used to fix a deadlock in the UFS driver.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-4-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Change the return type of .eh_timed_out()

Commit 6600593cbd93 ("block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE")
made it impossible for .eh_timed_out() implementations to call
scsi_done() without causing a crash.

Restore support for SCSI timeout handlers to call scsi_done() as follows:

 * Change all .eh_timed_out() handlers as follows:

   - Change the return type into enum scsi_timeout_action.
   - Change BLK_EH_RESET_TIMER into SCSI_EH_RESET_TIMER.
   - Change BLK_EH_DONE into SCSI_EH_NOT_HANDLED.

 * In scsi_timeout(), convert the SCSI_EH_* values into BLK_EH_* values.

Reviewed-by: Lee Duncan <lduncan@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-3-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Fix a race between scsi_done() and scsi_timeout()

If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.

Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.

Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update lpfc version to 14.2.0.8

Update lpfc version to 14.2.0.8

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Create a sysfs entry called lpfc_xcvr_data for transceiver info

The DUMP_MEMORY mailbox command is implemented for page A0 and A2 to
retrieve transceiver information from firmware.

The mailbox command output is then formatted to print raw data values for
userspace to parse via sysfs.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Log when congestion management limits are in effect

When bandwidth reduces from or recovers back to 100% due to congestion
management, log the event.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs

During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a
hard lockup similar to the call trace below may occur.

The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer
interrupts as expected, so change the strength of the spin lock to _irq.

Kernel panic - not syncing: Hard LOCKUP
CPU: 3 PID: 110402 Comm: cat Kdump: loaded

exception RIP: native_queued_spin_lock_slowpath+91

[IRQ stack]
 native_queued_spin_lock_slowpath at ffffffffb814e30b
 _raw_spin_lock at ffffffffb89a667a
 lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc]
 lpfc_cmf_timer at ffffffffc0abbc67 [lpfc]
 __hrtimer_run_queues at ffffffffb8184250
 hrtimer_interrupt at ffffffffb8184ab0
 smp_apic_timer_interrupt at ffffffffb8a026ba
 apic_timer_interrupt at ffffffffb8a01c4f
[End of IRQ stack]

 apic_timer_interrupt at ffffffffb8a01c4f
 lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc]
 lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc]
 full_proxy_read at ffffffffb83e7fc3
 vfs_read at ffffffffb833fe71
 ksys_read at ffffffffb83402af
 do_syscall_64 at ffffffffb800430b
 entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Set sli4_param's cmf option to zero when CMF is turned off

Add missed clearing of phba->sli4_hba.pc_sli4_params.cmf when CMF is turned
off.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Remove set but unused variable 'page'

The variable page is not used in the function, so delete it.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2348
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221009060249.40178-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Remove unused reset_in_progress flag logic

The reset_in_progress flag was never set.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20221007230751.309363-1-ipylypiv@google.com
Reviewed-by: Andrew Konecki <awkonecki@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvsas: Use sas_task_find_rq() for tagging

The request associated with a SCSI command coming from the block layer has
a unique tag, so use that when possible for getting a slot.

Unfortunately we don't support reserved commands in the SCSI midlayer yet.
As such, SMP tasks - as an example - will not have a request associated, so
in the interim continue to manage those tags for that type of sas_task
internally.

We reserve an arbitrary 4 tags for these internal tags. Indeed, we already
decrement MVS_RSVD_SLOTS by 2 for the shost can_queue when flag
MVF_FLAG_SOC is set. This change was made in commit 20b09c2992fe ("[SCSI]
mvsas: add support for 94xx; layout change; bug fixes"), but what those 2
slots are used for is not obvious.

Also make the tag management functions static, where possible.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-8-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvsas: Delete mvs_tag_init()

All mvs_tag_init() does is zero the tag bitmap, but this is already done
with the kzalloc() call to alloc the tags, so delete this unneeded
function.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-7-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Use sas_task_find_rq() for tagging

The request associated with a SCSI command coming from the block layer has
a unique tag, so use that when possible for getting a CCB.

Unfortunately we don't support reserved commands in the SCSI midlayer yet,
so in the interim continue to manage those tags internally (along with
tags for private commands).

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-6-git-send-email-john.garry@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove pm8001_tag_init()

In commit 5a141315ed7c ("scsi: pm80xx: Increase the number of outstanding
I/O supported to 1024") the pm8001_ha->tags allocation was moved into
pm8001_init_ccb_tag(). This changed the execution order of allocation.
pm8001_tag_init() used to be called after the pm8001_ha->tags allocation
and now it is called before the allocation.

Before:

pm8001_pci_probe()
`--> pm8001_pci_alloc()
     `--> pm8001_alloc()
          `--> pm8001_ha->tags = kzalloc(...)
          `--> pm8001_tag_init(pm8001_ha); // OK: tags are allocated

After:

pm8001_pci_probe()
`--> pm8001_pci_alloc()
|    `--> pm8001_alloc()
|         `--> pm8001_tag_init(pm8001_ha); // NOK: tags are not allocated
|
`--> pm8001_init_ccb_tag()
     `-->  pm8001_ha->tags = kzalloc(...) // today it is bitmap_zalloc()

Since pm8001_ha->tags_num is zero when pm8001_tag_init() is called it does
nothing. Tags memory is allocated with bitmap_zalloc() so there is no need
to manually clear each bit with pm8001_tag_free().

Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-5-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Put reserved tags in lower region of tagset

To be consistent with blk-mq, put the reserved tags in the lower region of
the tagset. Eventually we hope to get rid of all this reserved tag
management.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-4-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Use sas_task_find_rq()

Use sas_task_find_rq() to lookup the request per task for its driver tag.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Add sas_task_find_rq()

blk-mq already provides a unique tag per request. Some libsas LLDDs - like
hisi_sas - already use this tag as the unique per-I/O HW tag.

Add a common function to provide the request associated with a sas_task for
all libsas LLDDs.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-2-git-send-email-john.garry@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Remove the unused function transport_lba_64_ext()

The function transport_lba_64_ext() is defined in the target_core_sbc.c
file, but not called elsewhere, so remove this unused function.

drivers/target/target_core_sbc.c:276:34: warning: unused function 'transport_lba_64_ext'.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2427
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221018081235.124662-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Use sas_phy_match_port_addr() instead of open coding it

The SAS address comparison of asd_sas_port and expander phy is open
coded. Replace it with sas_phy_match_port_addr().

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-9-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Use sas_phy_addr_match() instead of open coding it

The SAS address comparison of expander phys is open coded. Replace it with
sas_phy_addr_match().

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-8-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Use sas_phy_match_dev_addr() instead of open coding it

The SAS address comparison of domain device and expander phy is open
coded. Replace it with sas_phy_match_dev_addr().

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-7-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Use sas_find_attathed_phy_id() instead of open coding it

The attached phy finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
hisi_sas_dev_found() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-6-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvsas: Use sas_find_attached_phy_id() instead of open coding it

The attached phy finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
mvs_dev_found_notify() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-5-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Use sas_find_attached_phy_id() instead of open coding it

The attached phy id finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
pm8001_dev_found_notify() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-4-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Introduce sas_find_attached_phy_id() helper

LLDDs are all implementing their own attached phy ID finding code.  Factor
it out to libsas.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-3-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Introduce SAS address comparison helpers

SAS address comparison is widely used in libsas. However they are all
opencoded and to avoid the line spill over 80 columns, are mostly split
into multi-lines. Introduce some helpers to prepare for some refactoring.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-2-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Release SCSI devices synchronously

All upstream scsi_device_put() calls happen from thread context. Hence
simplify scsi_device_put() by always calling the release function
synchronously. This commit prepares for constifying the SCSI host template
by removing an assignment that clears the module pointer in the SCSI host
template.

scsi_device_dev_release_usercontext() was introduced in 2006 via
commit 65110b216895 ("[SCSI] fix wrong context bugs in SCSI").

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove the put_device() call from scsi_device_get()

scsi_device_get() may be called from atomic context, e.g. by
shost_for_each_device(). A later commit will allow put_device() to sleep
for SCSI devices. Hence remove the put_device() call from
scsi_device_get().

According to Rusty Russell's "Module Refcount and Stuff mini-FAQ", calling
module_put() from atomic context is allowed since considerable time. See
also https://lkml.org/lkml/2002/11/18/330.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Simplify ufshcd_set_dev_pwr_mode()

Simplify the code for incrementing the SCSI device reference count in
ufshcd_set_dev_pwr_mode(). This commit removes one scsi_device_put() call
that happens from atomic context.

Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Rework scsi_single_lun_run()

Use __starget_for_each_device() instead of open-coding
starget_for_each_device(). Run the queues asynchronously instead of
synchronously.

This commit removes code that calls scsi_device_put() from atomic context.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Introduce a new list for SCSI proc directory entries

Instead of using scsi_host_template members to track the SCSI proc
directory entries, track these entries in a list. This changes the time
needed for looking up the proc dir pointer from O(1) into O(n). This is
considered acceptable since the number of SCSI host adapter types per host
is usually small (less than ten).

This change has been tested by attaching two USB storage devices to a qemu
host:

$ grep -aH . /proc/scsi/usb-storage/*
/proc/scsi/usb-storage/7:   Host scsi7: usb-storage
/proc/scsi/usb-storage/7:       Vendor: QEMU
/proc/scsi/usb-storage/7:      Product: QEMU USB HARDDRIVE
/proc/scsi/usb-storage/7:Serial Number: 1-0000:00:02.1:00.0-6
/proc/scsi/usb-storage/7:     Protocol: Transparent SCSI
/proc/scsi/usb-storage/7:    Transport: Bulk
/proc/scsi/usb-storage/7:       Quirks: SANE_SENSE
/proc/scsi/usb-storage/8:   Host scsi8: usb-storage
/proc/scsi/usb-storage/8:       Vendor: QEMU
/proc/scsi/usb-storage/8:      Product: QEMU USB HARDDRIVE
/proc/scsi/usb-storage/8:Serial Number: 1-0000:00:02.1:00.0-7
/proc/scsi/usb-storage/8:     Protocol: Transparent SCSI
/proc/scsi/usb-storage/8:    Transport: Bulk
/proc/scsi/usb-storage/8:       Quirks: SANE_SENSE

This commit prepares for constifying most SCSI host templates.

Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Fail host creation if creating the proc directory fails

Users expect that the contents of /proc/scsi is in sync with the contents
of /sys/class/scsi_host. Hence fail host creation if creating the proc
directory fails.

Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Introduce scsi_template_proc_dir()

Prepare for removing the 'proc_dir' and 'present' members from the SCSI
host template. This commit does not change any functionality.

Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Bradley Grove <linuxdrivers@attotech.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Initialize two host template members implicitly

Prepare for removing the 'proc_dir' and 'present' members from the SCSI
host template by implicitly initializing 'present' and 'emulated' in
'driver_template'.

Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Bradley Grove <linuxdrivers@attotech.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Update SATA dev FIS in sas_ata_task_done()

In sas_ata_task_done(), for commands which complete with error we set the
SATA dev FIS status field with ATA_ERR. In ata_eh_analyze_tf() this would
be interpreted as a HSM error. Set ATA_DRDY, which will lead libata to
judge as a device error, which is a safer bet.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-9-git-send-email-john.garry@huawei.com
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private

We have no users outside libsas any longer, so make sas_alloc_task(),
sas_alloc_slow_task(), and sas_free_task() private.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-8-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errors

In commit c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") the
driver had support added to handle NCQ errors but much of what is done in
this handling is duplicated from the libata EH.

In that named commit we handle in 2x main steps:

 a. Issue read log ext10 to examine and clear the errors

 b. Issue SATA_ABORT all command

Indeed, in libata EH, we do similar to above:

 a. ata_do_eh() -> ata_eh_autopsy() -> ata_eh_link_autopsy() ->
    ata_eh_analyze_ncq_error() -> ata_eh_read_log_10h()

 b. ata_do_eh() -> ata_eh_recover() which will issue a device soft reset
    or hard reset

Since there is so much duplication, use sas_ata_device_link_abort() which
will abort all pending IOs and kick of ATA EH which will do the steps,
above.

However we will not follow the advisory to send the SATA_ABORT all command
after the autopsy in read log ext10. Indeed, in libsas EH, we already send
a per-task SATA_ABORT command, and this is prior to the ATA EH kicking in
and issuing the read log ext10 in the recovery process. I judge that this
is ok as the SATA_ABORT command does not actually send any protocol on the
link to abort I/O on the other side, so would not change any state on the
disk (for the read log ext10 command).

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-7-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Modify task abort handling for SATA task

When we try to abort a SATA task, the CCB of the task which we are trying
to avoid may still complete. In this case, we should not touch the task
associated with that CCB as we can race with libsas freeing the last later
in sas_eh_handle_sas_errors() -> sas_eh_finish_cmd() for when
TASK_IS_ABORTED is returned from sas_scsi_find_task()

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-6-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Modify v3 HW SATA disk error state completion processing

When an NCQ error occurs, the controller will abnormally complete the I/Os
that are newly delivered to disk, and bit8 in CQ dw3 will be set which
indicates that the SATA disk is in error state. The current processing flow
is to set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will set
FIS stat to ATA_ERR. After analyzing the I/O by ata_eh_analyze_tf(),
err_mask will set to AC_ERR_HSM. If media error occurs for four times
within 10 minutes and the chip rejects new I/Os for four times, NCQ will be
disabled due to excessive errors, which is undesirable.

Therefore, use sas_task_abort() to handle abnormally completed I/Os when
SATA disk is in error state, as these abnormally completed I/Os are already
processed by sas_ata_device_link_abort() and qc->flag are set to
ATA_QCFLAG_FAILED. If sas_task_abort() is used, qc->err_mask will not be
modified in EH. Unlike the current process flow, it will not increase the
count of ECAT_TOUT_HSM and not turn off NCQ. Like other I/Os on the disk
that do not have an error but do not return after the NCQ error, they are
retried after the EH.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-5-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw

When CQ header dw3 SATA_DISK_ERR is set it means this SATA disk is in error
state and the current IPTT is invalid. An invalid IPTT does not correspond
to any slot.

In this scenario, new I/Os that delivered to disk will be rejected by the
controller and all I/Os remaining in the disk should be aborted, which we
add here with the sas_ata_device_link_abort() call.

In hisi_sas_abort_task() we don't want to issue a soft reset as it may
cause info to be lost in the target disk for the ATA EH autopsy. In this
case, just release resources - the disk won't return other I/Os normally
after NCQ Error, so this is safe.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-4-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()

Each branch currently defines a slot variable independently, and it is
neater to move it to the function head.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-3-git-send-email-john.garry@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Add sas_ata_device_link_abort()

Similar to how AHCI handles NCQ errors in ahci_error_intr() ->
ata_port_abort() -> ata_do_link_abort(), add an NCQ error handler for LLDDs
to call to initiate a link abort.

This will mark all outstanding QCs as failed and kick-off EH.

Note:

A "force reset" argument is added for drivers which require the ATA error
handling to always reset the device.

A driver may require this feature for when SATA device per-SCSI cmnd
resources are only released during reset for ATA EH. As such, we need an
option to force reset to be done, regardless of what any EH autopsy
decides.

The SATA device FIS fields are set to indicate a device error from
ata_eh_analyze_tf().

Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1665998435-199946-2-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Linux 6.1-rc1