platform/x86: inspur-platform-profile: Add platform profile support

Add support for Inspur platforms to used the platform profile feature.

This will allow users to determine and control the platform modes
between low-power, balanced and performance modes.

Signed-off-by: Ai Chao <aichao@kylinos.cn>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020024007.1677962-1-aichao@kylinos.cn
[ij: Removed kerneldoc markers from non-kerneldoc comments.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e

Thinkpad X120e also needs this battery quirk.

Signed-off-by: Olli Asikainen <olli.asikainen@gmail.com>
Link: https://lore.kernel.org/r/20231024190922.2742-1-olli.asikainen@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: wmi: Decouple WMI device removal from wmi_block_list

Use device_for_each_child_reverse() to find and unregister WMI devices
belonging to a WMI bus device instead of iterating thru the entire
wmi_block_list.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-6-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: wmi: Fix opening of char device

Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via
file private data"), the miscdevice stores a pointer to itself inside
filp->private_data, which means that private_data will not be NULL when
wmi_char_open() is called. This might cause memory corruption should
wmi_char_open() be unable to find its driver, something which can
happen when the associated WMI device is deleted in wmi_free_devices().

Fix the problem by using the miscdevice pointer to retrieve the WMI
device data associated with a char device using container_of(). This
also avoids wmi_char_open() picking a wrong WMI device bound to a
driver with the same name as the original driver.

Fixes: 44b6b7661132 ("platform/x86: wmi: create userspace interface for drivers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: wmi: Fix probe failure when failing to register WMI devices

When a WMI device besides the first one somehow fails to register,
retval is returned while still containing a negative error code. This
causes the ACPI device fail to probe, leaving behind zombie WMI devices
leading to various errors later.

Handle the single error path separately and return 0 unconditionally
after trying to register all WMI devices to solve the issue. Also
continue to register WMI devices even if some fail to allocate memory.

Fixes: 6ee50aaa9a20 ("platform/x86: wmi: Instantiate all devices before adding them")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: wmi: Fix refcounting of WMI devices in legacy functions

Until now, legacy GUID-based functions where using find_guid() when
searching for WMI devices, which did no refcounting on the returned
WMI device. This meant that the WMI device could disappear at any
moment, potentially leading to various errors. Fix this by using
bus_find_device() which returns an actual reference to the found
WMI device.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: wmi: Decouple probe deferring from wmi_block_list

Many aggregate WMI drivers do not use -EPROBE_DEFER when they
cannot find a WMI device during probe, instead they require
all WMI devices associated with an platform device to become
available at once. This is currently achieved by adding those
WMI devices to the wmi_block_list before they are registered,
which is then used by the deprecated GUID-based functions to
search for WMI devices.

Replace this approach with a device link which defers probing
of the WMI device until the associated platform device has finished
probing (and has registered all WMI devices). New aggregate WMI
drivers should not rely on this behaviour.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/amd/hsmp: Fix iomem handling

Since the metrics table is marked as io memory, use memcpy_fromio()
when copying its contents.

Compile-tested only.

Fixes: 5150542b8ec5 ("platform/x86/amd/hsmp: add support for metrics tbl")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231019135122.21774-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video

For a long time now the acpi_video driver reports evdev brightness up/down
key events for the brightness hotkeys on most (non ancient) laptops.

asus-wmi also reports evdev brightness up/down key events for these
keys leading to each press being reported twice and e.g. GNOME increasing
the brightness by 2 steps instead of 1 step.

Use the acpi_video_handles_brightness_key_presses() helper to detect if
acpi_video is reporting brightness key-presses and if it is then don't
report the same events also from the asus-wmi driver.

Note there is a chance that this may lead to regressions where
the brightness hotkeys stop working because they are not actually
reported by the acpi_video driver. Unfortunately the only way to
find out if this is a problem is to try.

To at least avoid regressions on old hw using the eeepc-wmi driver,
implement this as a key filter in asus-nb-wmi so that the eeepc-wmi
driver is not affected.

Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021094841.7419-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy

strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous
interfaces.

We expect ec_fw_string to be NUL-terminated based on its use with format
strings in thinkpad_acpi.c:
11241 | pr_notice("ThinkPad firmware release %s doesn't match the known patterns\n",
11242 |     ec_fw_string);

Moreover, NUL-padding is not required since ec_fw_string is explicitly
zero-initialized:
11185 | char ec_fw_string[18] = {0};

When carefully copying bytes from one buffer to another in
pre-determined blocks (like what's happening here with dmi_data):

|       static void find_new_ec_fwstr(const struct dmi_header *dm, void *private)
|       {
|        char *ec_fw_string = (char *) private;
|        const char *dmi_data = (const char *)dm;
|        /*
|         * ThinkPad Embedded Controller Program Table on newer models
|         *
|         * Offset |  Name                | Width  | Description
|         * ----------------------------------------------------
|         *  0x00  | Type                 | BYTE   | 0x8C
|         *  0x01  | Length               | BYTE   |
|         *  0x02  | Handle               | WORD   | Varies
|         *  0x04  | Signature            | BYTEx6 | ASCII for "LENOVO"
|         *  0x0A  | OEM struct offset    | BYTE   | 0x0B
|         *  0x0B  | OEM struct number    | BYTE   | 0x07, for this structure
|         *  0x0C  | OEM struct revision  | BYTE   | 0x01, for this format
|         *  0x0D  | ECP version ID       | STR ID |
|         *  0x0E  | ECP release date     | STR ID |
|         */
|
|        /* Return if data structure not match */
|        if (dm->type != 140 || dm->length < 0x0F ||
|        memcmp(dmi_data + 4, "LENOVO", 6) != 0 ||
|        dmi_data[0x0A] != 0x0B || dmi_data[0x0B] != 0x07 ||
|        dmi_data[0x0C] != 0x01)
|        return;
|
|        /* fwstr is the first 8byte string  */
|        strncpy(ec_fw_string, dmi_data + 0x0F, 8);

... we shouldn't be using a C string api. Let's instead use memcpy() as
this more properly relays the intended behavior.

Do note that ec_fw_string will still end up being NUL-terminated since
we are memcpy'ing only 8 bytes into a buffer full of 18 zeroes. There's
still some trailing NUL-bytes there. To ensure this behavior, let's add
a BUILD_BUG_ON checking the length leaves space for at least one
trailing NUL-byte.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Link: https://github.com/KSPP/linux/issues/90
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-platform-x86-thinkpad_acpi-c-v1-1-312f2e33034f@google.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo

Summary of changes:
- CPU 0 hotplug support is deprecated in the upstream kernel. This
  causes failures during level change for several customers. So, add a
  silent workaround to use Cgroup v2, without user option.
- Increase number of CPUs in a single request
- Fix turbo mode enable/disable issue
- Error handling for invalid input options

tools/power/x86/intel-speed-select: v1.18 release

This version addresses issues with:
- When CPU 0 hotplug is not possible, try cgroup v2 isolation
without any user input
- Fix turbo mode enable/disable swapped
- Sanitize command line integer and hex arguments
- Add more error messages
- Increase CPU count in one request

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0

From kernel version 6.5, CPU 0 hotplug capability is deprecated.
If some SST profile doesn't have CPU 0, then it is no longer possible to
offline CPU 0. This means that user space threads will still run on
CPU 0.

To workaround this issue, use cgroup v2 isolation feature. Whenever there
/sys/devices/system/cpu/cpu0/online file is absent or open fails, isolate
CPU 0 via CPU cgroup v2 isolation. Also add a command line option to
force even if the /sys/devices/system/cpu/cpu0/online is present.

The previous commit "01bcb56f059e ("tools/power/x86/intel-speed-select:
Prevent CPU 0 offline") was just warning about this issue based on the
kernel version 6.5 and above. With this new approach, instead of warning
take action to mitigate the issue.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

tools/power/x86/intel-speed-select: Increase max CPUs in one request

With the increase in the CPU count, this count needs to be updated.
Increase max CPU count to 512.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

tools/power/x86/intel-speed-select: Display error for core-power support

When core-power is getting enabled, if the feaure is not supported,
display error.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

tools/power/x86/intel-speed-select: No TRL for non compute domains

Don't call to set or get TRL for domains in which there are no CPUs.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

tools/power/x86/intel-speed-select: turbo-mode enable disable swapped

The command for turbo-mode enable and disable is swapped. Fix that.
Previously turbo-mode enable was actually disabling and disable was
enabling.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

tools/power/x86/intel-speed-select: Update help for TRL

TRL (turbo ratio limit) argument is passed in hex string. Clarify that
in the help.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

tools/power/x86/intel-speed-select: Sanitize integer arguments

If the command takes some integer arguments, make sure the command
contains only digits. Same for Hex arguments. Otherwise return error.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

platform/x86: acer-wmi: Remove void function return

Adhere to Linux kernel coding style.

Reported by checkpatch:

WARNING: void function return statements are not generally useful

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20231016182910.3344-1-edson.drosdeck@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/amd/pmc: Add dump_custom_stb module parameter

There have been instances when the default size (1M) of the STB is not
sufficient to get the complete traces of the failure. In such scenarios
we can use a module_param to enable full trace that shall contain more
debugging data. This is not a regular case and hence not enabling this
capability by default.

With this change, there will be two cases on how the driver fetches the
stb data:
1) A special case (proposed now) - which is required only for certain
platforms. Here, a new module param will be supplied to the driver that
will have a special PMFW supporting enhanced dram sizes for getting
the stb data. Without the special PMFW support, just setting the module
param will not help to get the enhanced stb data.

To adapt to this change, we will have a new amd_pmc_stb_handle_efr() to
handle enhanced firmware reporting mechanism. Note that, since num_samples
based r/w pointer offset calculation is not required for enhanced firmware
reporting we will have this mailbox command sent only in case of regular
STB cases.

2) Current code branch which fetches the stb data based on the parameters
like the num_samples, fsize and the r/w pointer.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Co-developed-by: Harsh Jain <Harsh.Jain@amd.com>
Signed-off-by: Harsh Jain <Harsh.Jain@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231010145003.139932-3-Shyam-sundar.S-k@amd.com
[ij: Renamed flex_arr -> stb_data_arr]
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/amd/pmc: Handle overflow cases where the num_samples range is higher

In amd_pmc_stb_debugfs_open_v2(), the stb buffer is created based on the
num_samples and the read/write pointer offset. This holds good when the
num_samples reported by PMFW is less than S2D_TELEMETRY_BYTES_MAX; where
the stb buffer gets filled from 0th position until
S2D_TELEMETRY_BYTES_MAX - 1 based on the read/write pointer offset.

But when the num_samples exceeds the S2D_TELEMETRY_BYTES_MAX, the current
code does not handle it well as it does not account for the cases where
the stb buffer has to filled up as a circular buffer.

Handle this scenario into two cases, where first memcpy will have the
samples from location:
(num_samples % S2D_TELEMETRY_BYTES_MAX) - (S2D_TELEMETRY_BYTES_MAX - 1)
and next memcpy will have the newest ones i.e.
0 - (num_samples % S2D_TELEMETRY_BYTES_MAX - 1)

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231010145003.139932-2-Shyam-sundar.S-k@amd.com
[ij: renamed flex_arr -> stb_data_arr]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/amd/pmc: Use flex array when calling amd_pmc_stb_debugfs_open_v2()

Currently in amd_pmc_stb_debugfs_open_v2() the buffer size is assumed to
be fixed and a second call to amd_pmc_stb_debugfs_open_v2() may race with
a process holding open another fd. This could change "fsize" to a
bigger size causing an out of bounds read.

Instead create a struct with a flexarray to solve this.

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231010145003.139932-1-Shyam-sundar.S-k@amd.com
[ij: renamed flex_arr -> stb_data_arr]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: asus-wireless: Replace open coded acpi_match_acpi_device()

Replace open coded acpi_match_acpi_device() in asus_wireless_add().

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231010134019.3892062-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: xo15-ebook: Replace open coded acpi_match_acpi_device()

Replace open coded acpi_match_acpi_device() in ebook_switch_add().

Note, while it is a bit longer it is more robust in case
more IDs will be added.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231010133936.3891996-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/amd/hsmp: improve the error log

1. Change print message during platform init to a more meaningful
   clear message.
2. Return the error code returned by hsmp_test() itself, rather then
   returning a common EOPNOTSUPP error.

Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20231010120310.3464066-3-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/amd/hsmp: add support for metrics tbl

AMD MI300 MCM provides GET_METRICS_TABLE message to retrieve
all the system management information from SMU.

The metrics table is made available as hexadecimal sysfs binary file
under per socket sysfs directory created at
/sys/devices/platform/amd_hsmp/socket%d/metrics_bin

Metrics table definitions will be documented as part of Public PPR.
The same is defined in the amd_hsmp.h header.

Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20231010120310.3464066-2-suma.hegde@amd.com
[ij: lseek -> lseek(), dram -> DRAM in dev_err()]
[ij: added period to terminate a documentation sentence]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/amd/hsmp: create plat specific struct

Having a separate platform device structure helps in future, to
contain platform specific variables and other data.

Also, define macros for dev nodes

Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20231010120310.3464066-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: msi-ec: Add more EC configs

This patch adds configurations for new EC firmware from the downstream
version of the driver.

Cc: Aakash Singh <mail@singhaakash.dev>
Cc: Jose Angel Pastrana <japp0005@red.ujaen.es>
Signed-off-by: Nikita Kravets <teackot@gmail.com>
Link: https://lore.kernel.org/r/20231006175352.1753017-9-teackot@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: msi-ec: rename fn_super_swap

This patch renames fn_super_swap to fn_win_swap for consistency
with the downstream version of the driver. Renaming the field to
fn_super_swap in the downstream driver would require modifying several
branches that are yet to be merged into the main branch, so I decided
to do it here instead.

Cc: Aakash Singh <mail@singhaakash.dev>
Cc: Jose Angel Pastrana <japp0005@red.ujaen.es>
Signed-off-by: Nikita Kravets <teackot@gmail.com>
Link: https://lore.kernel.org/r/20231006175352.1753017-7-teackot@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Merge branch 'pdx86/platform-drivers-x86-mellanox-init' into review-ilpo

platform: mellanox: Fix misspelling error in routine name

Change mlxplat_i2c_main_complition_notify() to
mlxplat_i2c_main_completion_notify().

Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231005075616.42777-3-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform: mellanox: Rename some init()/exit() functions for consistent naming

Currently some names of init()/exit() pairing function are not
consistent.

Rename pair mlxplat_pre_init()/mlxplat_post_exit() to respectively
mlxplat_logicdev_init()/mlxplat_logicdev_exit().

Rename pair mlxplat_post_init()/mlxplat_pre_exit() to respectively
mlxplat_platdevs_init()/mlxplat_platdevs_exit().

Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231005075616.42777-4-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform: mellanox: Fix a resource leak in an error handling path in probing flow

Fix missed resource deallocation in rollback flows.

Currently if an error occurs after a successful
mlxplat_i2c_main_init(), mlxplat_i2c_main_exit() call is missed in
rollback flow.
Thus, some resources are not de-allocated.

Move mlxplat_pre_exit() call from mlxplat_remove() into
mlxplat_i2c_main_exit().

Call mlxplat_i2c_main_exit() instead of calling mlxplat_pre_exit() in
mlxplat_probe() error handling flow.

Unregister 'priv->pdev_i2c' device in mlxplat_i2c_main_init() cleanup
flow if this device was successfully registered.

Fixes: 158cd8320776 ("platform: mellanox: Split logic in init and exit flow")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/lkml/70165032-796e-6f5c-6748-f514e3b9d08c@linux.intel.com/T/
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231005075616.42777-2-vadimp@nvidia.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Merge branch 'pdx86/platform-drivers-x86-int3472' into review-ilpo

platform/x86: int3472: Switch to devm_get_gpiod()

Switch to devm_get_gpiod() for discrete GPIOs for clks / regulators / LEDs
and let devm do the cleanup for us.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20231004162317.163488-5-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: int3472: Stop using gpiod_toggle_active_low()

Use the new skl_int3472_gpiod_get_from_temp_lookup() helper to get
a gpio to pass to register_gpio_clock(), skl_int3472_register_regulator()
and skl_int3472_register_pled().

This removes all use of the deprecated gpiod_toggle_active_low() and
acpi_get_and_request_gpiod() functions.

Suggested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20231004162317.163488-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper

Add a new skl_int3472_gpiod_get_from_temp_lookup() helper.

This is a preparation patch for removing usage of the deprecated
gpiod_toggle_active_low() and acpi_get_and_request_gpiod() functions.

[hdegoede@redhat.com] use the new skl_int3472_fill_gpiod_lookup() helper

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231004162317.163488-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper

Add a new skl_int3472_fill_gpiod_lookup() helper.

This is a preparation patch for removing usage of the deprecated
gpiod_toggle_active_low() and acpi_get_and_request_gpiod() functions.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20231004162317.163488-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: ARRAY BIST for Sierra Forest

Array BIST MSR addresses, bit definition and semantics are different for
Sierra Forest. Branch into a separate Array BIST flow on Sierra Forest
when user invokes Array Test.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-10-jithu.joseph@intel.com
[ij: ARRAY_GEN_* -> ARRAY_GEN* for consistency]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: Add new error code

Make driver aware of a newly added error code so that it can provide a
more appropriate error message.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-9-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: Add new CPU support

Add Granite Rapids(GNR) and Sierra Forest(SRF) cpuids to x86 match table
so that IFS driver can be loaded for those.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-8-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: Metadata validation for start_chunk

Add an additional check to validate IFS image metadata field prior to
loading the test image.

If start_chunk is not a multiple of chunks_per_stride error out.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-7-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: Validate image size

Perform additional validation prior to loading IFS image.

Error out if the size of the file being loaded doesn't match the size
specified in the header.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-6-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: Gen2 Scan test support

Width of chunk related bitfields is ACTIVATE_SCAN and SCAN_STATUS MSRs
are different in newer IFS generation compared to gen0.

Make changes to scan test flow such that MSRs are populated
appropriately based on the generation supported by hardware.

Account for the 8/16 bit MSR bitfield width differences between gen0 and
newer generations for the scan test trace event too.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-5-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: Gen2 scan image loading

Scan image loading flow for newer IFS generations are slightly different
from that of current generation. In newer schemes, loading need not be
done once for each socket as was done in gen0.

Also the width of NUM_CHUNKS bitfield in SCAN_HASHES_STATUS MSR has
increased from 8 -> 16 bits. Similarly there are width differences for
CHUNK_AUTHENTICATION_STATUS too.

Further the parameter to AUTHENTICATE_AND_COPY_CHUNK is passed
differently in newer generations.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-4-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: Refactor image loading code

IFS image loading flow is slightly different for newer IFS generations.

In preparation for adding support for newer IFS generations, refactor
portions of existing image loading code for reuse.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-3-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/ifs: Store IFS generation number

IFS generation number is reported via MSR_INTEGRITY_CAPS.  As IFS
support gets added to newer CPUs, some differences are expected during
IFS image loading and test flows.

Define MSR bitmasks to extract and store the generation in driver data,
so that driver can modify its MSR interaction appropriately.

Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-2-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/amd/pmc: Add PMFW command id to support S2D force flush

Recent PMFW have the capability that can force flush the FIFO
contents to DRAM on sending a command id via the mailbox. Add this support
to the driver.

Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230910142034.2967110-1-Shyam-sundar.S-k@amd.com
[ij: Corrected whitespace in dev_dbg_once()]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/tpmi: Add debugfs support for read/write blocked

Display read and write blocked status of each TPMI feature in addition
to disabled and locked status.

This will require reading of read/write blocked state from the hardware.
Currently tpmi_read_feature_status(), doesn't provide this state.

Define TPMI feature state as defined in the TPMI spec. Modify the function
tpmi_read_feature_status() to update full feature state instead of just
disabled and locked state.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230925194219.966602-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel-uncore-freq: Ignore minor version change

The hardware definition of every TPMI feature contains a major and minor
version. When there is a change in the MMIO offset or change in the
definition of a field, hardware will change major version. For addition
of new fields without modifying existing MMIO offsets or fields, only the
minor version is changed.

Driver is developed to support uncore frequency control (UFS) for a major
and minor version. If the hardware changes major version, since offsets
and definitions are changed, driver cannot continue to provide UFS
interface to users. Driver can still function with minor version change
as it will just miss the new functionality added by the hardware.

The current implementation logs information message and skips adding
uncore sysfs entry for a resource for any version mismatch. Check major
and minor version mismatch for every valid resource and fail on any major
version mismatch by logging an error message. A valid resource has a
version which is not 0xFF.

If there is mismatch with the minor version, continue with a log message.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231003184916.1860084-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: ISST: Ignore minor version change

The hardware definition of every TPMI feature contains a major and minor
version. When there is a change in the MMIO offset or change in the
definition of a field, hardware will change major version. For addition
of new fields without modifying existing MMIO offsets or fields, only the
minor version is changed.

Driver is developed to support SST functionality for a major and minor
version. If the hardware changes major version, since offsets and
definitions are changed, driver cannot continue to provide SST interface
to users. Driver can still function with a minor version change as it will
just miss the new functionality added by the hardware. The current
implementation doesn't ignore any version change.

If there is mismatch with the minor version, continue with an information
log message. If there is mismatch with the major version, log error and
exit.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231003184916.1860084-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel/tpmi: Add defines to get version information

Add defines to get major and minor version from a TPMI version field
value. This will avoid code duplication to convert in every feature
driver. Also add define for invalid version field.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231003184916.1860084-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: intel_speed_select_if: Use devm_ioremap_resource

Replace devm_ioremap() with devm_ioremap_resource() by defining a
resource.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231003163234.1856669-5-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: intel_speed_select_if: Remove hardcoded map size

The driver is using 256 as the size while calling devm_ioremap(). The
maximum offset can be obtained from isst_mmio_range. Add a field "size"
to the isst_mmio_range and use it instead of hardcoding.

No functional impact is expected.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231003163234.1856669-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: ISST: Allow level 0 to be not present

It is possible that SST level 0 or base level is not present in some
configurations. So don't set level 0 mask in level_en_mask by default.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231003163234.1856669-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: ISST: Use fuse enabled mask instead of allowed levels

Allowed level mask is a mask of levels, which are currently allowed to
dynamically switch by the OS. Fused mask is a mask of all levels even if
OS is not allowed to switch.

Even if OS is not allowed to dynamically switch, it is still possible for
user to boot to a level by using BIOS option. To decide which level to
boot next time, user wants to check parameters (power, performance or
thermal) of that level to decide.

So, when passing the level mask for display to user space, use fuse
enabled mask, which has all levels.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231003163234.1856669-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/siemens: simatic-ipc-batt-f7188x: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-28-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/siemens: simatic-ipc-batt-elkhartlake: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-27-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/siemens: simatic-ipc-batt-apollolake: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-26-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/siemens: simatic-ipc-batt: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-25-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/siemens: simatic-ipc-batt: Simplify simatic_ipc_batt_remove()

Instead of unconditionally returning zero, let simatic_ipc_batt_remove()
return no value. This is a preparation to convert the drivers using this
function to struct platform_driver::remove_new().

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-24-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: sel3350-platform: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-23-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: mlx-platform: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-22-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86/intel: bytcrc_pwrsrc: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-21-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/mellanox: nvsw-sn2201: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-20-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/mellanox: mlxreg-lc: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-19-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/mellanox: mlxreg-io: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-18-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/mellanox: mlxreg-hotplug: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-17-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/mellanox: mlxbf-tmfifo: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-16-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/mellanox: mlxbf-bootctl: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-15-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: thinkpad_acpi: sysfs interface to auxmac

Newer Thinkpads have a feature called MAC Address Pass-through.
This patch provides a sysfs interface that userspace can use
to get this auxiliary mac address.

Signed-off-by: Fernando Eckhardt Valle <fevalle@ipt.br>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230926202144.5906-1-fevalle@ipt.br
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/surface: aggregator: Annotate struct ssam_event with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct ssam_event.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230922175436.work.031-kees@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: hp-bioscfg: Annotate struct bios_args with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct bios_args.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Jorge Lopez <jorge.lopez2@hp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175420.work.701-kees@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

platform/x86: think-lmi: Use strreplace() to replace a character by nul

We can replace
p = strchrnul(str, '$OLD');
*p = '\0';
with
strreplace(str, '$OLD', '\0');
that does the compatible modification without a need of the temporary variable.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918135116.1248560-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: think-lmi: Replace kstrdup() + strreplace() with kstrdup_and_replace()

Replace open coded functionalify of kstrdup_and_replace() with a call.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918135116.1248560-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: hotplug: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-8-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: gpe: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-7-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: dtx: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-6-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator-registry: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-5-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator-cdev: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-4-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: acpi-notify: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-3-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: surface3-wmi: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-2-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: x86-android-tablets: Fix Lenovo Yoga Tablet 2 830F/L vs 1050F/L detection

gpio_crystalcove pin 10 is already in input mode and passing GPIOD_IN
when requesting the GPIO changes its pull-up/-down settings causing
the 830F/L to get misdetected as 1050F/L.

Switch to using GPIOD_ASIS when requesting the GPIO to fix
the misdetection.

Fixes: 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230915214933.62595-1-hdegoede@redhat.com

platform/x86: think-lmi: Add bulk save feature

On Lenovo platforms there is a limitation in the number of times an
attribute can be saved. This is an architectural limitation and it limits
the number of attributes that can be modified to 48.
A solution for this is instead of the attribute being saved after every
modification allow a user to bulk set the attributes and then trigger a
final save. This allows unlimited attributes.

This patch introduces a save_settings attribute that can be configured to
either single or bulk mode by the user.
Single mode is the default but customers who want to avoid the 48
attribute limit can enable bulk mode.

Displaying the save_settings attribute will display the enabled mode.

When in bulk mode writing 'save' to the save_settings attribute will
trigger a save. Once this has been done a reboot is required before more
attributes can be modified.

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230919141530.4805-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-pmc: Add support for BlueField-3

Add new access mechanism and list of supported events to program
and read the counters in BlueField-3.
Performance counter blocks being added for BlueField-3 include:
  - Memory Sub-system (mss) which has counters for monitoring
various DRAM and related skylib events
  - Last level Tile, which has 2 sets of counters (llt, llt_miss)
for monitoring Tile and cache metrics

Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/d5feee745f6bfd163e0c361e300d4b2ef1d72e00.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: asus-wmi: add support for ASUS screenpad

Add support for the WMI methods used to turn off and adjust the
brightness of the secondary "screenpad" device found on some high-end
ASUS laptops like the GX650P series and others.

There are some small quirks with this device when considering only the
raw WMI methods:
1. The Off method can only switch the device off
2. Changing the brightness turns the device back on
3. To turn the device back on the brightness must be > 1
4. When the device is off the brightness can't be changed (so it is
   stored by the driver if device is off).
5. Booting with a value of 0 brightness (retained by bios) means the bios
   will set a value of >0 <15
6. When the device is off it is "unplugged"

asus_wmi sets the minimum brightness as 20 in general use, and 60 for
booting with values <= min.

The ACPI methods are used in a new backlight device named asus_screenpad.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230830032237.42987-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge remote-tracking branch 'pdx86/platform-drivers-x86-android-tablets' into review-hans

platform/x86: x86-android-tablets: Add a comment about x86_android_tablet_get_gpiod()

Add a comment explaining why the special x86_android_tablet_get_gpiod()
helper is necessary for some of the GPIOs used in the x86-android-tablets;
and that for normal GPIO lookups this example should not be followed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230911210928.264908-1-hdegoede@redhat.com

platform/x86: x86-android-tablets: Drop "linux,power-supply-name" from lenovo_yt3_bq25892_0_props[]

The "linux,power-supply-name" property is a left-over from an earlier
attempt to allow properties to specify the power_supply class-device name.

The patch to read this property never made it upstream (and is no longer
necessary). Drop the unused property.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-9-hdegoede@redhat.com

platform/x86: x86-android-tablets: Use platform-device as gpio-keys parent

Use the new x86-android-tablets platform-device as gpio-keys parent
to make it clear that this gpio-keys device was instantiated by
the x86-android-tablets driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-8-hdegoede@redhat.com

platform/x86: x86-android-tablets: Stop using gpiolib private APIs

Refactor x86_android_tablet_get_gpiod() to no longer use
gpiolib private functions like gpiochip_find().

As a bonus this allows specifying that the GPIO is active-low,
like the /CE (charge enable) pin on the bq25892 charger on
the Lenovo Yoga Tablet 3.

Reported-by: Bartosz Golaszewski <brgl@bgdev.pl>
Closes: https://lore.kernel.org/platform-driver-x86/20230905185309.131295-12-brgl@bgdev.pl/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-7-hdegoede@redhat.com

platform/x86: x86-android-tablets: Create a platform_device from module_init()

Create a platform_device from module_init() and change
x86_android_tablet_init() / cleanup() into platform_device
probe() and remove() functions.

This is a preparation patch for refactoring x86_android_tablet_get_gpiod()
to no longer use gpiolib private functions like gpiochip_find().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-6-hdegoede@redhat.com

platform/x86: x86-android-tablets: Remove invalid_aei_gpiochip support

x86_dev_info.invalid_aei_gpiochip is no longer used by any boards
and the x86-android-tablets code should not use the gpiolib private
acpi_gpiochip_free_interrupts() function.

Reported-by: Bartosz Golaszewski <brgl@bgdev.pl>
Closes: https://lore.kernel.org/platform-driver-x86/20230905185309.131295-12-brgl@bgdev.pl/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-5-hdegoede@redhat.com

platform/x86: x86-android-tablets: Remove invalid_aei_gpiochip from Peaq C1010

Remove the invalid_aei_gpiochip setting from the x86_dev_info
for the Peaq C1010.

This is no longer necessary since there now is a quirk to ignore
the "dolby" button GPIO in gpiolib_acpi_quirks[] in
drivers/gpio/gpiolib-acpi.c .

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-4-hdegoede@redhat.com

gpiolib: acpi: Add a ignore interrupt quirk for Peaq C1010

On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
a "dolby" button. At the ACPI level an _AEI event-handler
is connected which sets an ACPI variable to 1 on both
edges. This variable can be polled + cleared to 0 using WMI.

Since the variable is set on both edges the WMI interface is pretty
useless even when polling. So instead of writing a custom WMI
driver for this the x86-android-tablets code instantiates
a gpio-keys platform device for the "dolby" button.

Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010,
so that it is not seen as busy when the gpio-keys driver requests it.

Note this replaces a hack in x86-android-tablets where it would
call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO
controller. acpi_gpiochip_free_interrupts() is considered private
(internal) gpiolib API so x86-android-tablets should stop using it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-3-hdegoede@redhat.com

gpiolib: acpi: Check if a GPIO is listed in ignore_interrupt earlier

In some cases where a broken AEI is present for a GPIO and the GPIO
is listed in the ignore_interrupt list to avoid the broken event
handler, the kernel may want to use the GPIO for another purpose.

Before this change trying to use such a GPIO for another purpose would
fail, because the ignore_interrupt list was only checked after
the acpi_request_own_gpiod() call, causing the GPIO to already be
claimed even though it is listed in the ignore_interrupt list.

Fix this by moving the ignore_interrupt list to above
the acpi_request_own_gpiod() call.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-2-hdegoede@redhat.com

platform/x86: asus-wmi: Support 2023 ROG X16 tablet mode

Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1
to enable tablet mode with lid flip (all screen rotations).

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: NVSW_SN2201 should depend on ACPI

The only probing method supported by the Nvidia SN2201 platform driver
is probing through an ACPI match table.  Hence add a dependency on
ACPI, to prevent asking the user about this driver when configuring a
kernel without ACPI support.

Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ec5a4071691ab08d58771b7732a9988e89779268.1693828363.git.geert+renesas@glider.be
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig

The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>