Merge tag 'drm-intel-next-2023-06-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 features for v6.5:

Features and functionality:
- Meteorlake (MTL) display enabling (Mika, Radhakrishna, José, Ankit, Clint,
  Gustavo, Imre, Anusha, Juha-Pekka, Matt)
- Allow VRR to be toggled during fastsets (Ville)
- Allow arbitrary refresh rates with VRR eDP panels (Ville)
- Support async flips on linear buffers on display ver 12+  (Arun)
- New debugfs for display clock frequencies (Bhanuprakash)
- Taint kernel when force probing unsupported devices (Jani)
- Expose CRTC CTM property on ILK/SNB/VLV (Ville)

DRM subsystem changes:
- EDID changes to support further conversion to struct drm_edid (Jani)
- Move i915 DSC parameter code to common DRM helpers (Dmitry Baryshkov)

Refactoring and cleanups:
- CSC color refactoring (Ville)
- VRR cleanups (Ville)
- Finish i915 conversion to struct drm_edid (Jani)
- Start high level display driver file (Jani)
- Hotplug refactoring (Ville)
- Misc display refactoring and cleanups (Jani, Ville)
- Use device based logging for state checker warnings (Jani)
- Split out hotplug and display irq handling (Jani)
- Move display device info and probe under display/ (Matt)
- HDCP cleanups (Suraj)
- Use localized warning ignores instead of per file (Jani)
- Remove superfluous enum i915_drm_suspend_mode (Maarten)
- PSR, pfit, scaler and chicken register definition cleanups (Ville)
- Constify pointers to hwmon_channel_info (Krzysztof Kozlowski)
- Replace all non-returning strlcpy with strscpy (Azeem Shaikh)
- Refactor VBT aux channel and DDC pin mapping (Ville)
- Include cleanups (Jani)

Fixes:
- Fix modeset locking issue in DP MST HDCP (Suraj)
- Fix disconnected Type-C/DP-alt disable at probe (Imre)
- Fix HDMI PCON DSC usage and color conversions (Ankit)
- Fix g4x HDMI infoframe/audio transmission port usage (Ville)
- Avoid use-after-free when DP connector init fails (Maarten)
- Fix voltage level for 480 MHz CDCLK (Chaitanya)
- Check HPD live state during eDP probe (Ville)
- Fix active port PLL selection for secondary MST streams (Imre)
- Check pipe source size when using SKL+ scalers (Ville)
- Fix MIPI DSI sleep sequences (Hans de Goede)
- Fix DPCD register write order to match 128b/132b requirement (Arun)
- Increase AUX timeout for Type-C (Suraj)
- Communicate display power demands to pcode (Stan)
- Fix potential division by zero in DSC compute config (Nikita Zhandarovich)
- Fix fast wake AUX sync length (Jouni)
- Fix potential oops on intel_get_crtc_new_encoder() (Ville)

Merges:
- drm-next backmerges (Rodrigo, Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zg5eat32.fsf@intel.com

Merge tag 'drm-misc-next-2023-06-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.5:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

Driver Changes:

 * bridge
   * imx: Fix module linking
   * tc358762: Support reset GPIO

 * meson
   * Add support for MIPI DSI displays; plus fixes and DT bindings

 * panel
   * Add Support for Rocktech RK043FN48H; plus DT bindings
   * Add support for Starry himax83102-j02; plus DT bindings
   * Add support for Starry ili9882t; plus DT bindings

 * virtio
   * Support sync-object UAPI

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607085644.GA12673@linux-uq9g

Merge tag 'drm-habanalabs-next-2023-06-08' of https://git./linux/kernel/git/ogabbay/linux into drm-next

This tag contains additional habanalabs driver changes for v6.5:

- uAPI changes:
  - Return 0 when user queries if there was a h/w or f/w error and no such error happened.
    Previously we returned an error in such case.

- New features and improvements:
  - Add pci health check when we lose connection with the firmware. This can be used to
    distinguish between pci link down and firmware getting stuck.
  - Add more info to the error print when TPC interrupt occur.
  - Reduce amount of code under mutex in the command submission of signal event.

- Firmware related fixes:
  - Fixes to the handshake protocol during f/w initialization.
  - Display information that the f/w sends us when encountering a DMA error.
  - Do soft-reset using a message sent to firmware instead of writing to MMIO.
  - Prepare generic code to extract f/w version numbers.

- Bug fixes and code cleanups. Notable fixes are:
  - Unsecure certain TPC registers that the user should access.
  - Fix handling of QMAN errors
  - Fix memory leak when recording errors (to later pass them to the user)
  - Multiple fixes to razwi interrupt handling code

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608103043.GA2699019@ogabbay-vm-u20.habana-labs.com

Merge tag 'drm-next-20230529' of git://git./linux/kernel/git/pinchartl/linux into drm-next

Renesas DRM/KMS drivers:

- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602111504.GA24855@pendragon.ideasonboard.com

accel/habanalabs: refactor error info reset

Moved error info reset code to single function for future use from
other places in the driver.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: add event queue extra validation

In order to increase reliability of the event queue interface,
we apply to Gaudi2 the same mechanism we have in Gaudi1.
The extra validation is basically checking that the received
event index matches the expected index.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: unsecure TSB_CFG_MTRR regs

In order to utilize Engine Barrier padding, user must have access to
this register set.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: move ioctl error print to debug level

We don't want to allow users to spam the kernel log and sending
ioctls with bad opcodes is a sure way to do it.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

accel/habanalabs: fix bug of not fetching addr_dec info

addr_dec info should always be fetched, regardless of cause value.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: add description to several info ioctls

Several info ioctls may return success although no data retrieved.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: remove sim code

There were a few places where simulator only code got into the upstream.
Remove those places that can confuse other developers.

Fixes: 2a0a839b6a28 ("habanalabs: extend fatal messages to contain PCI info")
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: mask part of hmmu page fault captured address

When receiving page fault from hmmu, the captured address is scrambled
both by HW and by driver. The driver part is unscrambled but the HW
part isn't getting unscrambled.
To avoid declaring wrong address, the HW scrambled part will be
masked.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: update state when loading boot fit

Any FW component we load must be followed by a corresponding state
update. However, it seems that so far we skipped doing so for the
bootfit case, so fix that.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: print qman data on error only for lower qman

By default, the upper QMANs are not used, and instead engines ARCs
access the lower QMANs directly.
Errors for upper QMANs are therefore not expected, and the debug print
of the PQ entries is not needed.

Modify the QMAN debug data print on errors to include only information
for the lower QMAN.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: use lower QM in QM errors handling

The QMAN GLBL_ERR_STS_4 register has indications for errors also in the
lower CQ and the ARC CQ, and not just for errors in the lower CP.
Modify the relevant define/struct and the related print to use "lower
QM" instead of "lower CP".

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: use binning info when handling razwi

When receiving sei interrupt from tpc or decoder, we need to check
the binning mask because if the engine is binned, the razwi info
won't be in the router of the binned engine, instead will be in the
router of the substitute engine.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: remove support for mmu disable

As mmu disable mode is only used for bring-up stages, let's remove this
option and all code related to it.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: upon DMA errors, use FW-extracted error cause

Initially, the driver used to read the error cause data directly from
the ASIC. However, the FW now clears it before the driver could read
it. Therefore we should use the error cause data that is extracted by
the FW.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: print max timeout value on CS stuck

If a workload got stuck, we print an error to the kernel log about it.
Add to that print the configured max timeout value, as that value is
not fixed between ASICs and in addition it can be configured using
a kernel module parameter.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

accel/habanalabs: align to latest firmware specs

Update the firmware common interface files with the latest version.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

accel/habanalabs: fix mem leak in capture user mappings

This commit fixes a memory leak caused when clearing the user_mappings
info when a new context is opened immediately after user_mapping is
captured and a hard reset is performed.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: set unused bit as reserved

Get latest f/w gaudi2 interface file which marks unused
bist_need_iatu_config bit in cold_rst_data structure as reserved bit.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>

accel/habanalabs: rename security functions related arguments

Make the argument names specify the registers array represent
registers that should be unsecured so the user can access them.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: fix gaudi2_get_tpc_idle_status() return

The gaudi2_get_tpc_idle_status() function returned the incorrect variable
so it always returned true.

Fixes: d85f0531b928 ("accel/habanalabs: break is_idle function into per-engine sub-routines")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: Fix some kernel-doc comments

Make the description of @regs_range_array and @regs_range_array_size
to @user_regs_range_array and @user_regs_range_array_size  to silence
the warnings:

drivers/accel/habanalabs/common/security.c:506: warning: Function parameter or member 'user_regs_range_array' not described in 'hl_init_pb_ranges_single_dcore'
drivers/accel/habanalabs/common/security.c:506: warning: Function parameter or member 'user_regs_range_array_size' not described in 'hl_init_pb_ranges_single_dcore'
drivers/accel/habanalabs/common/security.c:506: warning: Excess function parameter 'regs_range_array' description in 'hl_init_pb_ranges_single_dcore'
drivers/accel/habanalabs/common/security.c:506: warning: Excess function parameter 'regs_range_array_size' description in 'hl_init_pb_ranges_single_dcore'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=4940
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: always fetch pci addr_dec error info

Due to missing indication of address decode source (LBW/HBW bus),
we should always try and fetch extended information.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: fix a static warning - 'dubious: x & !y'

Use a straight forward approach to get a conditional result.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: poll for device status update following WFE cmd

Currently, we rely on COMMS protocol's ack to verify that WFE command
has been acknowledged by the FW. However, this does not guarantee that
the device status has been updated.
Although unlikely, this could trigger a race since the driver expects
the device to be halted at that stage, but it might not be.
Therefore, we increase WFE's robustness by polling on the status
register that will be updated once the device is actually halted.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: expose debugfs files later

Currently the debugfs root folder and files for a device are created at
an early step, before the device initialization and before the char
device and sysfs files are exposed to user.
As there is no real reason not to do it together with the device
creation, postpone it to be done right afterwards.

The initialization of the debugfs entry structure is left in its
current position because it is used before creating the files.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: add pci health check during heartbeat

Currently upon a heartbeat failure, we don't know if the failure
is due to firmware hang or due to a bad PCI link. Hence, we
are reading a PCI config space register with a known value (vendor ID)
so we will know which of the two possibilities caused the heartbeat
failure.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: add missing tpc interrupt info

For some reason the last possible tpc interrupt cause in
gaudi2_tpc_interrupts_cause is missing from the code.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: refactor abort of completions and waits

Aborting CS completions should be in command_submission.c but aborting
waiting for user interrupts should be in device.c.

This separation is also for adding more abort operations in the future.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: minimize encapsulation signal mutex lock time

Sync Stream Encapsulated Signal Handlers can be managed from different
contexts, and as such they are protected via a spin_lock.
However, spin_lock was unnecessarily protecting a larger code section
than really needed, covering a sleepable code section as well.
Since spin_lock disables preemption, it could lead to sleeping in
atomic context.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

drm/panel: simple: add support for Rocktech RK043FN48H panel

Add support for Rocktech RK043FN48H 4.3" (480x272) LCD-TFT panel.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306020343.jNTWeM0P-lkp@intel.com/
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607063139.621351-6-dario.binacchi@amarulasolutions.com

dt-bindings: display: simple: add Rocktech RK043FN48H

Add compatible to panel-simple for Rocktech Displays Limited
RK043FN48H 4.3" 480x272 LCD-TFT panel.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607063139.621351-5-dario.binacchi@amarulasolutions.com

drm/bridge: imx: turn imx8{qm,qxp}-ldb into single-object modules

With the previous fix, these modules are built from a single C file.

Rename the source files so they match the module names.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230605120021.1774711-2-masahiroy@kernel.org

drm/bridge: imx: fix mixed module-builtin object

With CONFIG_DRM_IMX8QM_LDB=m and CONFIG_DRM_IMX8QXP_LDB=y (or vice
versa), imx-ldb-helper.o is linked to a module and also to vmlinux
even though the expected CFLAGS are different between builtins and
modules.

This is the same situation as fixed by commit 637a642f5ca5 ("zstd:
Fixing mixed module-builtin objects").

Split imx-ldb-helper.c into a separate module.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230605120021.1774711-1-masahiroy@kernel.org

accel/habanalabs: call to HW/FW err returns 0 when no events exist

This commit modifies the call to retrieve HW or FW error events to
return success when no events are pending, as done in the calls to
other events.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: unsecure TPC bias registers

User needs to be able to perform downcast / upcast of fp8_143 dtype.
Hence bias register needs to be accessed by the user.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: do soft-reset using cpucp packet

This is done depending on the FW version. The cpucp method is
preferable and saves scratchpads resource.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: check fw version using sw version

The fw inner version is less trustable, instead use the fw general
sw release version.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: extract and save the FW's SW major/minor/sub-minor

It is not always possible to know the FW's SW version from the inner FW
version. Therefore we should extract the general SW version in addition
to the FW version and use it in functions like
'hl_is_fw_ver_below_1_9' etc.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: rename fw_{major/minor}_version to fw_inner_{major/minor}_ver

We later want to add fields for Firmware SW version. The current
extracted FW version is the inner FW versioning so the new name
is better and also better differentiate from the FW's SW version.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: add helper to extract the FW major/minor

the helper is extract_u32_until_given_char and can later be used to
also get the major/minor of the sw version.

Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: fix bug in free scratchpad memory

This commit fixes a bug in Gaudi2 when freeing the scratchpad memory
in case software init fails.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: remove commented code that won't be used

Once it was decided that these security settings are to be done by FW
rather than by the driver, there's no reason to keep them in the code.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: allow user to modify EDMA RL register

EDMA transpose workload requires to signal for every activation.
User FW sends all the dummy signals to RD_LBW_RATE_LIM_CFG, to save
lbw bandwidth. We need the user to be able to access that register to
configure it.

Signed-off-by: Rakesh Ughreja <rughreja@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: ignore false positive razwi

In Gaudi2 asic, PSOC RAZWI may cause in HBW or LBW. The address that
caused the error is read from HW register and printed by the Driver.
There are cases where the Driver receives an indication on PSOC
RAZWI error but the address value is zero. In that case, the indication
is a false positive.
The Driver should not "count" a PSOC RAZWI event error when the
caused the address is zeroed.

Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

accel/habanalabs: remove variable gaudi_irq_name

gcc with W=1 reports
drivers/accel/habanalabs/gaudi/gaudi.c:117:19: error:
  ‘gaudi_irq_name’ defined but not used [-Werror=unused-const-variable=]
  117 | static const char gaudi_irq_name[GAUDI_MSI_ENTRIES][GAUDI_MAX_STRING_LEN] = {
      |                   ^~~~~~~~~~~~~~

This variable is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

drm/i915/mtl: Reset only one lane in case of MFD

In case when only two or less transmit lanes are owned such as MFD
(DP-alt with x2 lanes) we need to reset only one data lane (lane0).
With only x2 lanes we don't need to poll for the phy current
status on both data lanes since only the owned data lane will respond.

v2: Find better naming for lanes and revise the commit message (Luca)

Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> (v1)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com> (v2)
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230601101314.332392-1-mika.kahola@intel.com

drm/i915: Use 18 fast wake AUX sync len

HW default for wake sync pulses is 18. 10 precharge and 8 preamble. There
is no reason to change this especially as it is causing problems with
certain eDP panels.

v3: Change "Fixes:" commit
v2: Remove "fast wake" repeat from subject

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Fixes: e1c71f8f9180 ("drm/i915: Fix fast wake AUX sync len")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8475
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530101649.2549949-1-jouni.hogander@intel.com

drm/virtio: Wait for each dma-fence of in-fence array individually

Use dma-fence-unwrap API for waiting each dma-fence of the in-fence array
individually. Sync file's in-fence array always has a non-matching fence
context ID, which doesn't allow to skip waiting of fences with a matching
context ID in a case of a merged sync file fence.

Suggested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230416115237.798604-3-dmitry.osipenko@collabora.com

drm/virtio: Refactor and optimize job submission code path

Move virtio_gpu_execbuffer_ioctl() into separate virtgpu_submit.c file,
refactoring and optimizing the code along the way to ease addition of new
features to the ioctl.

The optimization is done by using optimal ordering of the job's submission
steps, reducing code path from the start of the ioctl to the point of
pushing job to virtio queue. Job's initialization is now performed before
in-fence is awaited and out-fence setup is made after sending out job to
virtio.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230416115237.798604-2-dmitry.osipenko@collabora.com

drm/i915/display: Set correct voltage level for 480MHz CDCLK

According to Bspec, the voltage level for 480MHz is to be set as 1
instead of 2.

BSpec: 49208

Fixes: 06f1b06dc5b7 ("drm/i915/display: Add 480 MHz CDCLK steps for RPL-U")
v2: rebase

Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529060747.3972259-1-chaitanya.kumar.borah@intel.com

MAINTAINERS: Add Carl/Pranjal as QAIC reviewers

Carl and Pranjal have been reviewing the QAIC patches.  List them as
reviewers so that they are copied on all developments which will make
it easier for them to continue reviewing QAIC patches.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Carl Vanderlip <quic_carlv@quicinc.com>
Acked-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523161421.11017-1-quic_jhugo@quicinc.com

drm/i915: Flush power delayed put when connector init failed

When intel_dp_init_connector fails, some power wells used in dp aux
communication may not be completely disabled yet. This may result in a
null pointer dereference when icl_aux_pw_to_phy() is called from
icl_combo_phy_aux_power_well_disable() after the encoder and connector
are already freed.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221222201804.1380963-1-maarten.lankhorst@linux.intel.com

drm/i915: Remove i915_drm_suspend_mode

enum i915_drm_suspend_mode suspend_mode is only used in
intel_display_power, while we only care about whether we perform a
s2idle. Remove it and use a simple bool.

v2: Rebase

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529105900.1942814-1-jani.nikula@intel.com

drm/i915_drm.h: fix a typo

 'rbiter' -> 'arbiter'

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230529112956.2083389-1-suijingfeng@loongson.cn

mailmap: Add missing email address

I've been using that email address for contributions for a while but it
seems I never added it to mailmap.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531133724.133872-1-maxime@cerno.tech

drm/meson: venc: include linux/bitfield.h

Without this header, the use of FIELD_PREP() can cause a build failure:

drivers/gpu/drm/meson/meson_venc.c: In function 'meson_encl_set_gamma_table':
drivers/gpu/drm/meson/meson_venc.c:1595:24: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]

Fixes: 51fc01a03442c ("drm/meson: venc: add ENCL encoder setup for MIPI-DSI output")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602124539.894888-1-arnd@kernel.org

drm/meson: Remove unneeded semicolon

./drivers/gpu/drm/meson/meson_dw_mipi_dsi.c:117:2-3: Unneeded semicolon
./drivers/gpu/drm/meson/meson_dw_mipi_dsi.c:231:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5392
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602091416.107850-1-yang.lee@linux.alibaba.com

drm/i915/display: switch the rest of the connectors to struct drm_edid

Convert the remaining uses of struct edid based drm_get_edid(),
drm_connector_update_edid_property() and drm_add_edid_modes() calls to
the struct drm_edid based drm_edid_read_ddc(),
drm_edid_connector_update() and drm_edid_connector_add_modes().

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b1b53bb9004adaa402e061f7df2caf0eb4723a43.1685437501.git.jani.nikula@intel.com

drm/display/dp_mst: convert to struct drm_edid

Convert the topology manager to use struct drm_edid, add
drm_dp_mst_edid_read() that returns drm_edid, and rewrite the old
drm_dp_mst_get_edid() to use it.

Note that the old drm_get_edid() ended up calling
drm_connector_update_edid_property(). This responsibility is now
deferred to drivers, which all do it anyway after calling
drm_dp_mst_edid_read() or drm_dp_mst_get_edid().

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c32e5c241934093fc4144eed4c01155e1f03af1.1685437501.git.jani.nikula@intel.com

drm/edid: make drm_edid_duplicate() safe to call with NULL parameter

It's a bit tedious to check for NULL before calling
drm_edid_duplicate(). Make it handle NULL parameter graciously.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ae8923d39a5abd0260fdf7f9cc54c5e046e70d3.1685437501.git.jani.nikula@intel.com

drm/i915/lvds: switch to drm_edid_read_switcheroo()

Use drm_edid_read_switcheroo() to switch from struct edid to struct
drm_edid.

Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/429cd6f23366cb4cace4fa13cf92ad068aca64dd.1685437501.git.jani.nikula@intel.com

drm/edid: add drm_edid_read_switcheroo()

Add a switcheroo variant to the struct drm_edid based EDID read
functions.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ab5ec994670ea50f95c8079c1f1ae915940b00f.1685437501.git.jani.nikula@intel.com

drm/i915/sdvo: stop caching has_hdmi_audio in struct intel_sdvo

Use the information stored in display info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e02f2f7381dfcee6e4160a5fc17aea6ff04baf9.1685437500.git.jani.nikula@intel.com

drm/i915/sdvo: stop caching has_hdmi_monitor in struct intel_sdvo

Use the information stored in display info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e9e1dcd554d470bdf474891a431b15e1880f9a0.1685437500.git.jani.nikula@intel.com

drm/i915/hdmi: stop caching has_hdmi_sink in struct intel_hdmi

Use the information stored in display info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5cdb4731260b062c0f0ad2f8b64195c9a57bcb76.1685437500.git.jani.nikula@intel.com

drm/i915/hdmi: stop caching has_audio in struct intel_hdmi

Use the information stored in display info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/710286536d6b07ba8aa068b65b2b2c0c7743220e.1685437500.git.jani.nikula@intel.com

drm/i915/dp: stop caching has_hdmi_sink in struct intel_dp

Use the information stored in display info. Add intel_dp_has_hdmi_sink()
helper to access it.

v2: Rebased

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/748103fda572b3552e5bbdafb300d8508d4eeaf4.1685437500.git.jani.nikula@intel.com

drm/i915/dp: stop caching has_audio in struct intel_dp

Use the information stored in display info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/695bbe8b5ebee6e492f95a1c818da15691752dc8.1685437500.git.jani.nikula@intel.com

drm/display/dp_mst: drop has_audio from struct drm_dp_mst_port

Caching the has_audio in struct drm_dp_mst_port seems odd, and oddly
placed. Defer audio handling to drivers, and use the info from the
connector display info. i915 was the only one using it anyway.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d9eefdf150870479c5797f027d4c2b0a19ff583.1685437500.git.jani.nikula@intel.com

drm/edid: parse display info has_audio similar to is_hdmi

Since we already iterate everything that's needed for determining audio,
reduce the need to call drm_detect_monitor_audio() by storing has_audio
to connector info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/391a93b25c6bcbb39854aaa2813570cfb1580ed9.1685437500.git.jani.nikula@intel.com

Merge tag 'drm-misc-next-2023-06-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.5:

UAPI Changes:

Cross-subsystem Changes:

 * fbdev:
   * Add Kconfig options and initializer macros for file I/O, convert
     DRM fbdev emulation

Core Changes:

 * Unify handling of struct file_operations.show_fdinfo

 * Use .probe in all i2c code (interface cleanup)

 * TTM:
   * Remove unused code

Driver Changes:

 * amdgpu:
   * Use shared show_fdinfo code
   * Fix building without procfs

 * bridge:
   * display-conenctor: Add support for external power supply
   * samsung-dsim: Fix enabling; Support variable clocking
   * tc358767: Fixes
   * ti-sn65dsi83: Fix enabling

 * msm:
   * Use shared show_fdinfo code

 * msxfb:
   * Add support for i.MX93 LCDIF

 * panel:
   * Add support for Ampire AM-800480L1TMQW-T00H plus DT bindings
   * panel-edp: Convert .remove to return void

 * stm:
   * dsi: Use devm_ helper
   * ltdc: Fix potential invalid pointer deref

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230601112246.GA10882@linux-uq9g

drm/panel: Support for Starry-ili9882t TDDI MIPI-DSI panel

The Starry-ili9882 is a 10.51" WUXGA TFT panel. which fits in nicely with
the existing panel-boe-tv101wum-nl6 driver. From the datasheet,MIPI need
to keep the LP11 state before the lcm_reset pin is pulled high. So add
lp11_before_reset flag.

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-5-yangcong5@huaqin.corp-partner.google.com

dt-bindings: display: panel: Add compatible for Starry ili9882t

The STARRY ili9882t is a 10.51" WUXGA TFT LCD panel,
which fits in nicely with the existing panel-boe-tv101wum-nl6
driver. Hence, we add a new compatible with panel specific config.

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-4-yangcong5@huaqin.corp-partner.google.com

drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel

The Starry-himax83102-j02 is a 10.51" WUXGA TFT panel. which fits in nicely
with the existing panel-boe-tv101wum-nl6 driver. From the datasheet[1], MIPI
needs to keep the LP11 state before the lcm_reset pin is pulled high, so
increase lp11_before_reset flag.

[1]: https://github.com/HimaxSoftware/Doc/tree/main/Himax_Chipset_Power_Sequence

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[dianders: removed some spacing on one line]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-3-yangcong5@huaqin.corp-partner.google.com

dt-bindings: display: panel: Add compatible for Starry himax83102-j02

The STARRY himax83102-j02 is a 10.51" WUXGA TFT LCD panel,
which fits in nicely with the existing panel-boe-tv101wum-nl6
driver. Hence, we add a new compatible with panel specific config.

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-2-yangcong5@huaqin.corp-partner.google.com

drm/panel: khadas-ts050: update timings to achieve 60Hz refresh rate

This updates the panel timings to achieve a clean 60Hz refresh rate.

Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-13-56eb7a4d5b8e@linaro.org

drm/meson: add support for MIPI-DSI transceiver

The Amlogic G12A/G12B/SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver
(ver 1.21a), with a custom glue managing the IP resets, clock and data
inputs similar to the DW-HDMI Glue on other Amlogic SoCs.

This adds support for the Glue managing the transceiver, mimicing the init
flow provided by Amlogic to setup the ENCL encoder, the glue, the transceiver,
the digital D-PHY and the Analog PHY in the proper way.

An optional "MEAS" clock can be enabled to measure the delay between each
vsync feeding the DW-MIPI-DSI transceiver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-12-56eb7a4d5b8e@linaro.org

drm/meson: add DSI encoder

This adds an encoder bridge designed to drive a MIPI-DSI display
by using the ENCL encoder through the internal MIPI DSI transceiver
connected to the output of the ENCL pixel encoder.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-11-56eb7a4d5b8e@linaro.org

drm/meson: venc: add ENCL encoder setup for MIPI-DSI output

This adds supports for the ENCL encoder connected to a MIPI-DSI transceiver on the
Amlogic AXG, G12A, G12B & SM1 SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-10-56eb7a4d5b8e@linaro.org

drm/meson: only use components with dw-hdmi

Only DW-HDMI currently needs components since it reuses
the drm-meson driver context to access HHI registers (sic).

Once this is solved, we can get rid on components.

Until now, limit the components matching to the dw-hdmi compatibles
we know to require this hack, for other bridges simply use probe defer
instead and get over this components sitation.

The back story is that we simply cannot attach DSI adapters bridges
if we use components, only DSI panels, this is because we bind/unbind
the DSI controller at each drm-meson driver master bind tentative.
With this the I2C DSI bridge is unable to find the DSI controller
host and everything fails to probe.

This will simplify a lot adding new or older HDMI bridges.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org

drm/meson: fix unbind path if HDMI fails to bind

If the case the HDMI controller fails to bind, we try to unbind
all components before calling drm_dev_put() which makes drm_bridge_detach()
crash because unbinding the HDMI controller frees the bridge memory.

The solution is the unbind all components at the end like in the remove
path.

Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-8-56eb7a4d5b8e@linaro.org

dt-bindings: display: meson-vpu: add third DPI output port

Add third port corresponding to the ENCL DPI encoder used to connect
to DSI or LVDS transceivers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-7-56eb7a4d5b8e@linaro.org

dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings

The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI
transceiver (ver 1.21a) with a custom glue managing the IP resets,
clock and data inputs similar to the DW-HDMI Glue on the same
Amlogic SoC families.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-6-56eb7a4d5b8e@linaro.org

drm/bridge: tc358762: Add reset GPIO support

Add reset GPIO support. The reset GPIO is cleared after supply regulator
was enabled, and set before supply regulator is disabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530192805.648646-2-marex@denx.de

dt-bindings: display: bridge: tc358762: Document reset-gpios

This chip has one reset GPIO input, document it. The reset GPIO
is optional as it is sometimes not connected on some hardware.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530192805.648646-1-marex@denx.de

drm/i915: Implement dedicated fbdev I/O helpers

Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the fbdev callbacks. i915 was the only
caller of the DRM helpers, so remove them from the helper module.

i915's fbdev emulation is still incomplete as it doesn't implement
deferred I/O and damage handling for mmaped pages.

v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_IO_HELPERS options

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-14-tzimmermann@suse.de

drm/fbdev-generic: Implement dedicated fbdev I/O helpers

Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the callbacks. Fbdev-generic was the
only caller of the DRM helpers, so remove them from the helper
module.

v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_SYS_HELPERS_DEFERRED option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-13-tzimmermann@suse.de

drm/msm: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Msm does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

Msm's fbdev emulation has been incomplete as it didn't implement
damage handling. Partilly fix this by implementing damage handling
for write and draw operation. It is still missing for mmaped pages.

v4:
* use initializer macros for struct fb_ops
* partially support damage handling
v2:
* use FB_SYS_HELPERS option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-12-tzimmermann@suse.de

drm/fb-helper: Export helpers for marking damage areas

Export drm_fb_helper_damage() and drm_fb_helper_damage_range(), which
handle damage areas for fbdev emulation. This is a temporary export
that allows to move the DRM I/O helpers for fbdev into drivers. Only
fbdev-generic and i915 need them. Both will be updated to implement
damage handling by themselves and the exported functions will be removed.

v4:
* update interfaces

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-11-tzimmermann@suse.de

drm/tegra: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Tegra does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-10-tzimmermann@suse.de

drm/omapdrm: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Omapdrm does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tomi Valkeinen <tomba@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-9-tzimmermann@suse.de

drm/fbdev-dma: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Fbdev-dma does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-8-tzimmermann@suse.de

drm/radeon: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Radeon does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

v4:
* use initializer macros for struct fb_ops
v2:
* use FB_IO_HELPERS option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-7-tzimmermann@suse.de

drm/gma500: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Gma500 does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

v4:
* use initializer macros for struct fb_ops
v2:
* use FB_IO_HELPERS option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-6-tzimmermann@suse.de

drm/exynos: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Exynos does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

v4:
* use initializer macros for struct fb_ops
v3:
* don't reorder Makefile rules (Sam)
v2:
* use FB_IO_HELPERS option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-5-tzimmermann@suse.de

drm/armada: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Armada does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

v4:
* use initializer macros for struct fb_ops
v2:
* use FB_IO_HELPERS option

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-4-tzimmermann@suse.de