pci: fix several trivial typos in comment

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

aer: fix a wrong init PCI_ERR_COR_STATUS w1cmask type register

Error Status Register, so this patch fix a wrong definition
for PCI_ERR_COR_STATUS register with w1cmask type.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pcie_aer: fix typos in pcie_aer_inject_error comment

Refer to "PCI Express Base Spec3.0", this comments can't
fit the description in spec, so we should fix them.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

aer: fix wrong check on expose aer tlp prefix log

when specify TLP Prefix log as using pcie_aer_inject_error,
the TLP prefix log is always discarded. because the check
is incorrect, the End-End TLP Prefix Supported bit
(PCI_EXP_DEVCAP2_EETLPP) should be in Device Capabilities 2 Register.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pcie: correct mistaken register bit for End-End TLP Prefix Blocking

from pcie spec 7.8.17, the End-End TLP Prefix Blocking bit local
is 15(e.g. 0x8000) in device control 2 register.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: Fix memory leaks reported by Coverity

All four leaks are similar, so fix them in one patch.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: validate the existence of handle_output before calling it

We don't validate the existence of handle_output which may let a buggy
guest to trigger a SIGSEV easily. E.g:

1) write 10 to queue_sel to a virtio net device with only 1 queue
2) setup an arbitrary pfn
3) then notify queue 10

Fixing this by validating the existence of handle_output before.

Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Fam Zheng <famz@redhat.com>

virtio-scsi: remove empty wrapper for cmd

The anonymous struct only has a single field now, drop the wrapper
structure.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>

virtio-scsi: clean out duplicate cdb field

cdb is now part of cmd, drop it from req.
There's also nothing to check using build assert now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>

virtio-scsi: fix cdb/sense size

Commit "virtio-scsi: use standard-headers" added
cdb and sense into req/rep structures, which
breaks uses of sizeof for these structures,
since qemu adds its own arrays on top.

To fix, redefine CDB/sense field size to 0.

Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

uapi/virtio_scsi: allow overriding CDB/SENSE size

QEMU wants to use virtio scsi structures with
a different VIRTIO_SCSI_CDB_SIZE/VIRTIO_SCSI_SENSE_SIZE,
let's add ifdefs to allow overriding them.

Keep the old defines under new names:
VIRTIO_SCSI_CDB_DEFAULT_SIZE/VIRTIO_SCSI_SENSE_DEFAULT_SIZE,
since that's what these values really are:
defaults for cdb/sense size fields.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>

virtio-scsi: drop duplicate CDB/SENSE SIZE

This is duplicated from the kernel header,
drop our copy.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

exec: don't include hw/boards for linux-user

As noted by Andreas, hw/boards.h shouldn't be used outside softmmu code.
Include it conditionally, and drop the (now unnecessary) ifdef guards in
hw/boards.h

Reported-by: Andreas Färber <afaerber@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>

acpi: specify format for build_append_namestring

Will catch users if we misused it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

MAINTAINERS: drop aliguori@amazon.com

It's sad when a friend leaves, but we have to move on.

Drop Anthony's email from MAINTAINERS so he stops getting
irrelevant email.

Got Anthony's ack off-list.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Anthony Liguori <aliguori@amazon.com>

tpm: Move memory subregion function into realize function

Move the memory subregion function into the DeviceClass realize function
due to isa_address_space (now) crashing if called in the instance init
function.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>

virtio-pci: Convert to realize()

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pci: Convert pci_nic_init() to Error to avoid qdev_init()

qdev_init() is deprecated, and will be removed when its callers have
been weaned off it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

machine: query mem-merge machine property

Running
    qemu-bin ... -machine pc,mem-merge=on
leads to crash:
    x86_64-softmmu/qemu-system-x86_64 -machine pc,dump-guest-core=on
    qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
    Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed.  Aborted
    (core dumped)

This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.

Fix this by querying machine properties through designated wrappers.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

machine: query dump-guest-core machine property

Running
    qemu-bin ... -machine pc,dump-guest-core=on
leads to crash:
    x86_64-softmmu/qemu-system-x86_64 -machine pc,dump-guest-core=on
    qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
    Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed.  Aborted
    (core dumped)

This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.

Fix this by querying machine properties through designated wrappers.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

hw/boards: make it safe to include for linux-user

Make it safe to include hw/boards.h in exec.c
for linux-user configurations.
We don't need any of its contents though.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

machine: query phandle-start machine property

Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.

Query phandle-start by accessing machine properties through designated
wrappers.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

machine: query kvm-shadow-mem machine property

Commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed
the global option descriptions and moved them to MachineState's QOM
properties.

Query kvm-shadow-mem by accessing machine properties through designated
wrappers.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: add machine state to kvm_arch_init

Needed to query machine's properties.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

machine: query kernel-irqchip property

Running
    x86_64-softmmu/qemu-system-x86_64 -machine pc,kernel_irqchip=on -enable-kvm
leads to crash:
    qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
    Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed.  Aborted
    (core dumped)

This happens because the commit e79d5a6 ("machine: remove qemu_machine_opts
global list") removed the global option descriptions and moved them to
MachineState's QOM properties.

Fix this by querying machine properties through designated wrappers.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

machine: allowed/required kernel-irqchip support

The code using kernel-irqchip property requires 'allowed/required'
functionality. Replace machine's kernel_irqchip field with two fields
representing the new functionality and expose them through wrappers.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

machine: replace qemu opts with iommu property

Fixes a QEMU crash when passing iommu parameter in command line.
Running
    x86_64-softmmu/qemu-system-x86_64 -machine pc,iommu=on -enable-kvm
leads to crash:
    qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper:
    Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed.
    Aborted (core dumped)

This happens because commit e79d5a6 ("machine: remove qemu_machine_opts global
list") removed the global option descriptions and moved them to MachineState's
QOM properties.

Fix this by querying machine properties through designated wrappers.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

pci/shpc: fix signed integer overflow

clang undefined behaviour sanitizer reports:
> hw/pci/shpc.c:162:27: runtime error: left shift of 1 by 31 places
> cannot be represented in type 'int'

Caused by the usual lack of a 'U' qualifier on a constant 1 being
shifted left. Fix it up.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi-test: update expected files

commit ecdc7bab095a2cf29d9e9d4a7e1494f586a8b270
    "acpi: fix aml_equal term implementation"
dropped a useless Zero in generated code,
update expected files appropriately.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: fix aml_equal term implementation

The DefLEqual op does not have a target operand. Remove it.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

aml-build: append opcodes using build_append_byte

Opcodes are raw bytes, they shouldn't be added
using build_append_int. This only happens to work
with 0 and 1 opcodes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

aml-build: don't modify child

this code:
    aml_append(foo, bar);

might, non-intuitively, modify bar, which means that e.g. the following
might not DTRT:

    c = ....;
    aml_append(a, c);
    aml_append(b, c);

to fix, simply allocate an intermediate array,
and always modify that.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-03-04' into staging

trivial patches for 2015-03-04

# gpg: Signature made Tue Mar 10 05:16:59 2015 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-03-04: (44 commits)
  9pfs: remove useless return
  gdbstub: avoid possible NULL pointer dereference
  milkymist-pfpu: fix GCC 5.0.0 aggressive-loop-optimizations warning
  fix GCC 5.0.0 logical-not-parentheses warnings
  migration: Fix coding style (whitespace issues)
  oslib-posix: Fix compiler warning (-Wclobbered) and simplify the code
  disas/microblaze: Fix warnings caused by missing 'static' attribute
  disas/arm: Fix warnings caused by missing 'static' attribute
  vhost_net: Add missing 'static' attribute
  e500: fix memory leak
  gitignore: Ignore new tests
  gitignore: Track common.env in iotests gitignore
  sysbus: fix memory leak
  milkymist.c: fix memory leak
  macio: fix possible memory leak
  sparc/leon3.c: fix memory leak
  nbd: fix resource leak
  qemu-char: add cyrillic key 'numerosign' to Russian keymap
  qemu-char: add cyrillic characters 'numerosign' to VNC keysyms
  qapi-schema: Fix SpiceChannel docs
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

9pfs: remove useless return

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

gdbstub: avoid possible NULL pointer dereference

Coverity reports that s->chr is checked after put_packet dereferences it.
Move the check earlier, consistent with the code used for user-mode
emulation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

milkymist-pfpu: fix GCC 5.0.0 aggressive-loop-optimizations warning

man gcc:
  Warn if in a loop with constant number of iterations the compiler
  detects undefined behavior in some statement during one or more of
  the iterations.

Milkymist pfpu has no jump instructions, so checking for MICROCODE_WORDS
instructions should have kept us in bounds of s->microcode, but i++
allowed one loop too many,

  hw/misc/milkymist-pfpu.c: In function ‘pfpu_write’:
  hw/misc/milkymist-pfpu.c:365:20: error: loop exit may only be reached after undefined behavior [-Werror=aggressive-loop-optimizations]
                   if (i++ >= MICROCODE_WORDS) {
                      ^
  hw/misc/milkymist-pfpu.c:167:14: note: possible undefined statement is here
       uint32_t insn = s->microcode[pc];
                ^

The code can still access out of bounds, because it presumes that PC register
always begins at 0, and we allow writing to it.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

fix GCC 5.0.0 logical-not-parentheses warnings

man gcc:
  Warn about logical not used on the left hand side operand of a
  comparison.  This option does not warn if the RHS operand is of a
  boolean type.

By preferring bool over int where sensible, but without modifying any
depending code, make GCC happy in cases like this,
  qemu-img.c: In function ‘compare_sectors’:
  qemu-img.c:992:39: error: logical not is only applied to the left hand
  side of comparison [-Werror=logical-not-parentheses]
           if (!!memcmp(buf1, buf2, 512) != res) {

hw/ide/core.c:1836 doesn't throw an error,
  assert(!!s->error == !!(s->status & ERR_STAT));
even thought the second operand is int (and first hunk of this patch has
a very similar case), maybe GCC developers still have a little faith in
C programmers.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

migration: Fix coding style (whitespace issues)

* Remove trailing whitespace (fixes 9 errors from checkpatch.pl).
  One comment line was longer than 80 characters, so wrap it
  and fix a typo, too.
* Replace tabs by blanks (fixes 1 error).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

oslib-posix: Fix compiler warning (-Wclobbered) and simplify the code

gcc reports this warning with -Wclobbered:

util/oslib-posix.c: In function ‘os_mem_prealloc’:
util/oslib-posix.c:374:49: error: argument ‘memory’ might be clobbered by
 ‘longjmp’ or ‘vfork’ [-Werror=clobbered]

Fix this and simplify the code by using an existing macro.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

disas/microblaze: Fix warnings caused by missing 'static' attribute

Warnings from the Sparse static analysis tool:

disas/microblaze.c:289:3: warning:
 symbol 'opcodes' was not declared. Should it be static?
disas/microblaze.c:570:6: warning:
 symbol 'register_prefix' was not declared. Should it be static?
disas/microblaze.c:571:6: warning:
 symbol 'special_register_prefix' was not declared. Should it be static?
disas/microblaze.c:572:6: warning:
 symbol 'fsl_register_prefix' was not declared. Should it be static?
disas/microblaze.c:573:6: warning:
 symbol 'pvr_register_prefix' was not declared. Should it be static?

Remove the unused variable special_register_prefix.
The variable pvr_register_prefix was unused, too, but can be used.
Add also 'const' where possible.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

disas/arm: Fix warnings caused by missing 'static' attribute

Warnings from the Sparse static analysis tool:

disas/arm.c:1552:15: warning:
 symbol 'last_type' was not declared. Should it be static?
disas/arm.c:1553:5: warning:
 symbol 'last_mapping_sym' was not declared. Should it be static?
disas/arm.c:1554:9: warning:
 symbol 'last_mapping_addr' was not declared. Should it be static?

Instead of adding 'static', the unused variables and the unused code which
refers to those variables (which was deactivated a long time ago in
commit 4b0f1a8b) are removed.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vhost_net: Add missing 'static' attribute

This fixes a warning from smatch.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

e500: fix memory leak

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>

gitignore: Ignore new tests

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

gitignore: Track common.env in iotests gitignore

Rather than track it in the toplevel gitignore

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

sysbus: fix memory leak

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

milkymist.c: fix memory leak

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

macio: fix possible memory leak

If ret = macio_initfn_ide() is less than 0, the timer_memory
will leak the memory it points to.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

sparc/leon3.c: fix memory leak

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

nbd: fix resource leak

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qemu-char: add cyrillic key 'numerosign' to Russian keymap

numero sign is the number sign key of Russian keyboard layout, we
get this key with 'shift + 3'. It's missing in current Russian keymap file,
this patch fixes it.
As number sign does not exsit in Russian keyboard layout[1][2], this
patch also removes the 'numbersign' from Russian keymap.

[1] http://en.wikipedia.org/wiki/Keyboard_layout#Russian
[2] http://kbd-intl.narod.ru/english/layouts

Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qemu-char: add cyrillic characters 'numerosign' to VNC keysyms

This patch adds missing cyrillic character 'numerosign' to the VNC
keysym table, it's needed by Russian keyboard. And I get the keysym from
'<X11/keysymdef.h>', the current keysym table in Qemu was generated from
it.

Signed-off-by: Wang xin <wangxinxin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qapi-schema: Fix SpiceChannel docs

The value is called channel-type, not connection-type

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

xen: Remove xen_cmos_set_s3_resume()

The function is not used anymore, and thus can be deleted.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

ui/vnc: Remove vnc_stop_worker_thread()

This function is not used anymore, let's remove it.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

ui: Removed unused functions

Remove qemu_console_displaystate(), qemu_remove_kbd_event_handler(),
qemu_different_endianness_pixelformat() and cpkey(), since they are
completely unused.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vhost: Remove superfluous '\n' around error_report()

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

arm/digic_boards: Remove superfluous '\n' around error_report()

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

tpm: Remove superfluous '\n' around error_report()

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

xtensa: Remove superfluous '\n' around error_report()

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vfio: Remove superfluous '\n' around error_report()

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

vhost-scsi: Remove superfluous '\n' around error_report()

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

Remove superfluous '\n' around error_report()

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

numa: remove superfluous '\n' around error_setg

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

pl330.c: remove superfluous '\n' around error_setg

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

a9gtimer: remove superfluous '\n' around error_setg

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

block: remove superfluous '\n' around error_report/error_setg

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qmp-commands.hx: Fix several typos

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qerror.h: Swap definitions that were not in alphabetical order

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

Add copyright and author after file split

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

cutils: refine strtol error handling in parse_debug_env

Avoid truncation of a 64-bit long to a 32-bit int, and check for errno
(especially ERANGE).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qemu-options: fix/document -incoming options

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

smbios: document cmdline options for smbios type 2-4, 17 structures

Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

memsave: Improve and disambiguate error message

When requesting a size which cannot be read, the error message shows
a different address which is misleading to the user and it looks like
something's wrong with the address parsing. This is because the input
@addr variable is incremented in the memory dumping loop:

(qemu) memsave 0xffffffff8418069c 0xb00000 mem
Invalid addr 0xffffffff849ffe9c specified

Fix that by saving the original address and size and use them in the
error message:

(qemu) memsave 0xffffffff8418069c 0xb00000 mem
Invalid addr 0xffffffff8418069c/size 11534336 specified

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

xilinx_ethlite: Clean up after commit 2f991ad

The "fall through" added by the commit is clearly intentional.  Mark
it so.  Hushes up Coverity.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

xen-pt: fix Out-of-bounds read

The array length of s->real_device.io_regions[] is
"PCI_NUM_REGIONS - 1".

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

xen-pt: fix Negative array index read

Coverity spot:
Function xen_pt_bar_offset_to_index() may return a negative
value (-1) which is used as an index to d->io_regions[] down
the line.

Let's pass index directly as an argument to
xen_pt_bar_reg_parse().

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging

Patch queue for ppc - 2015-03-09

This is my current patch queue for 2.3. Highlights include:

  * pseries: 2.3 machine
  * pseries: Export RTC via QOM
  * pseries: EEH support
  * mac: save/restore support
  * fix POWER5 hosts
  * random bug fixes

# gpg: Signature made Mon Mar  9 14:00:53 2015 GMT using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg:                 aka "Alexander Graf <alex@csgraf.de>"

* remotes/agraf/tags/signed-ppc-for-upstream: (38 commits)
  target-ppc: Fix warnings from Sparse
  sPAPR: Implement sPAPRPHBClass EEH callbacks
  sPAPR: Implement EEH RTAS calls
  target-ppc: Add versions to server CPU descriptions
  PPC: Introduce the Virtual Time Base (VTB) SPR register
  PPC: Remove duplicate OPENPIC defines in default-configs
  ppc64-softmmu: Remove duplicated OPENPIC from config
  Revert "default-configs/ppc64: add all components of i82378 SuperIO chip used by prep"
  spapr_vio: Convert to realize()
  openpic: convert to vmstate
  openpic: switch IRQQueue queue from inline to bitmap
  openpic: fix up loadvm under -M mac99
  openpic: fix segfault on -M mac99 savevm
  target-ppc: force update of msr bits in cpu_post_load
  target-ppc: move sdr1 value change detection logic to helper_store_sdr1()
  cuda.c: include adb_poll_timer in VMStateDescription
  adb.c: include ADBDevice parent state in KBDState and MouseState
  macio.c: include parent PCIDevice state in VMStateDescription
  display cpu id dump state
  Openpic: check that cpu id is within the number of cpus
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-ppc: Fix warnings from Sparse

Sparse report:

target-ppc/mmu-hash64.c:353:9: warning: returning void-valued expression
target-ppc/mmu-hash64.c:620:9: warning: returning void-valued expression

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

sPAPR: Implement sPAPRPHBClass EEH callbacks

The patch implements sPAPRPHBClass EEH callbacks so that the EEH
RTAS requests can be routed to VFIO for further handling.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

sPAPR: Implement EEH RTAS calls

The emulation for EEH RTAS requests from guest isn't covered
by QEMU yet and the patch implements them.

The patch defines constants used by EEH RTAS calls and adds
callbacks sPAPRPHBClass::{eeh_set_option, eeh_get_state, eeh_reset,
eeh_configure}, which are going to be used as follows:

  * RTAS calls are received in spapr_pci.c, sanity check is done
    there.
  * RTAS handlers handle what they can. If there is something it
    cannot handle and the corresponding sPAPRPHBClass callback is
    defined, it is called.
  * Those callbacks are only implemented for VFIO now. They do ioctl()
    to the IOMMU container fd to complete the calls. Error codes from
    that ioctl() are transferred back to the guest.

[aik: defined RTAS tokens for EEH RTAS calls]
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

target-ppc: Add versions to server CPU descriptions

5b79b1c "target-ppc: Create versionless CPU class per family if KVM" added
a dynamic CPU class registration with the name of the CPU family which
QEMU is running on. For example, this allowed specifying "-cpu POWER7"
on every version of POWER7 machine, not just the one which POWER7 was
an alias of. I.e. before 5b79b1c, "-cpu POWER7" would not work on real
POWER7 2.1 and would work on POWER7 2.3 only. The same story for POWER8.

However that patch broke POWER5+ support as POWER5+ CPU uses the same
name as the CPU class so dynamic registering of the POWER5+ class failed.

This redefines POWER5+ server CPUs by adding a version to them and adding
an alias for TCG case. KVM will use dynamically registered CPUs.

While we are here, do the same for 970 CPU.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>

PPC: Introduce the Virtual Time Base (VTB) SPR register

This patch adds basic support for the VTB.

PowerISA:
The Virtual Time Base (VTB) is a 64-bit incrementing counter.
Virtual Time Base increments at the same rate as the Time Base until its value
becomes 0xFFFF_FFFF_FFFF_FFFF (2 64 - 1); at the next increment its value
becomes 0x0000_0000_0000_0000. There is no interrupt or other indication when
this occurs.

The operation of the Virtual Time Base has the following additional
properties.
1. Loading a GPR from the Virtual Time Base has no effect on the accuracy of
the Virtual Time Base.
2. Copying the contents of a GPR to the Virtual Time Base replaces the
contents of the Virtual Time Base with the contents of the GPR.

Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

PPC: Remove duplicate OPENPIC defines in default-configs

The CONFIG_OPENPIC variable was declared multiple times. We only need it once.

Signed-off-by: Alexander Graf <agraf@suse.de>

ppc64-softmmu: Remove duplicated OPENPIC from config

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

Revert "default-configs/ppc64: add all components of i82378 SuperIO chip used by prep"

This reverts commit 9c9984242ce46ccf8636f5c19e81d794e84aa0c7 as even when
it was applied, all supposedly new config options were already enabled.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

spapr_vio: Convert to realize()

Bonus fix: always set an error on failure.  Some failures were silent
before, except for the generic error set by device_realize().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

openpic: convert to vmstate

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

openpic: switch IRQQueue queue from inline to bitmap

This is in preparation for using VMSTATE_BITMAP in a followup vmstate
migration patch.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>

openpic: fix up loadvm under -M mac99

Issuing loadvm under -M mac99 would fail for two reasons: firstly an incorrect
version number for openpic would cause openpic_load() to abort, and secondly
a cut/paste error when restoring the IVPR and IDR registers caused subsequent
vmstate sections to become misaligned and abort early.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>

openpic: fix segfault on -M mac99 savevm

A simple copy/paste error causes savevm on -M mac99 to segfault.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>

target-ppc: force update of msr bits in cpu_post_load

Since env->msr has already been restored by the time cpu_post_load is called,
make sure that ppc_store_msr() is explicitly called with all msr bits except
MSR_TGPR marked as invalid.

This solves the issue where MSR flags aren't set correctly when restoring a VM
snapshot, in particular the internal env->excp_prefix value when MSR_EP has
been altered by a guest.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>

target-ppc: move sdr1 value change detection logic to helper_store_sdr1()

Otherwise when cpu_post_load calls ppc_store_sdr1() when restoring a VM
snapshot the value is deemed unchanged and so the internal env->htab*
variables aren't set correctly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

cuda.c: include adb_poll_timer in VMStateDescription

Make sure that we include the adb_poll_timer when saving the VM state for
client OSs that use it, e.g. Darwin.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>

adb.c: include ADBDevice parent state in KBDState and MouseState

The parent ADBDevice contains the device id on the ADB bus. Make sure that
this state is included in both its subclasses since some clients (such as
OpenBIOS) reprogram each device id after enumeration.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>

macio.c: include parent PCIDevice state in VMStateDescription

This ensures that the macio PCI device is correctly configured when restoring
from a VM snapshot.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>

display cpu id dump state

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Openpic: check that cpu id is within the number of cpus

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

pseries: Switch VGA endian on H_SET_MODE

When the guest switches the interrupt endian mode, which essentially
means a global machine endian switch, we want to change the VGA
framebuffer endian mode as well in order to be backward compatible
with existing guests who don't know about the new endian control
register.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

vga: Expose framebuffer byteorder as a QOM property

The VGA device model now supports having the framebuffer in either endian,
and can be switched between these by the guest via a register in the qext
region.

However, in some cases (e.g. LE OS on the pseries machine) we have
existing guest that don't know about the endian switch register, but other
parts of the qemu code have better information to set a default endianness
than the VGA code does of itself.

In order to allow them to set a correct default endianness in these cases,
without breaking abstraction walls, this patch exposes the VGA framebuffer
endianness via a writable QOM property.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[agraf: use instance_init for property exposure]
Signed-off-by: Alexander Graf <agraf@suse.de>