drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge

adv7533 bridge tries to dynamically switch lanes based on the
mode by detaching and attaching the mipi dsi device.

This approach is incorrect because this method of dynamic switch of
detaching and attaching the mipi dsi device also results in removing
and adding the component which is not necessary.

This approach is also prone to deadlocks. So for example, on the
db410c whenever this path is executed with lockdep enabled,
this results in a deadlock due to below ordering of locks.

-> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
        lock_acquire+0x6c/0x90
        drm_modeset_acquire_init+0xf4/0x150
        drmm_mode_config_init+0x220/0x770
        msm_drm_bind+0x13c/0x654
        try_to_bring_up_aggregate_device+0x164/0x1d0
        __component_add+0xa8/0x174
        component_add+0x18/0x2c
        dsi_dev_attach+0x24/0x30
        dsi_host_attach+0x98/0x14c
        devm_mipi_dsi_attach+0x38/0xb0
        adv7533_attach_dsi+0x8c/0x110
        adv7511_probe+0x5a0/0x930
        i2c_device_probe+0x30c/0x350
        really_probe.part.0+0x9c/0x2b0
        __driver_probe_device+0x98/0x144
        driver_probe_device+0xac/0x14c
        __device_attach_driver+0xbc/0x124
        bus_for_each_drv+0x78/0xd0
        __device_attach+0xa8/0x1c0
        device_initial_probe+0x18/0x24
        bus_probe_device+0xa0/0xac
        deferred_probe_work_func+0x90/0xd0
        process_one_work+0x28c/0x6b0
        worker_thread+0x240/0x444
        kthread+0x110/0x114
        ret_from_fork+0x10/0x20

-> #0 (component_mutex){+.+.}-{3:3}:
        __lock_acquire+0x1280/0x20ac
        lock_acquire.part.0+0xe0/0x230
        lock_acquire+0x6c/0x90
        __mutex_lock+0x84/0x400
        mutex_lock_nested+0x3c/0x70
        component_del+0x34/0x170
        dsi_dev_detach+0x24/0x30
        dsi_host_detach+0x20/0x64
        mipi_dsi_detach+0x2c/0x40
        adv7533_mode_set+0x64/0x90
        adv7511_bridge_mode_set+0x210/0x214
        drm_bridge_chain_mode_set+0x5c/0x84
        crtc_set_mode+0x18c/0x1dc
        drm_atomic_helper_commit_modeset_disables+0x40/0x50
        msm_atomic_commit_tail+0x1d0/0x6e0
        commit_tail+0xa4/0x180
        drm_atomic_helper_commit+0x178/0x3b0
        drm_atomic_commit+0xa4/0xe0
        drm_client_modeset_commit_atomic+0x228/0x284
        drm_client_modeset_commit_locked+0x64/0x1d0
        drm_client_modeset_commit+0x34/0x60
        drm_fb_helper_lastclose+0x74/0xcc
        drm_lastclose+0x3c/0x80
        drm_release+0xfc/0x114
        __fput+0x70/0x224
        ____fput+0x14/0x20
        task_work_run+0x88/0x1a0
        do_exit+0x350/0xa50
        do_group_exit+0x38/0xa4
        __wake_up_parent+0x0/0x34
        invoke_syscall+0x48/0x114
        el0_svc_common.constprop.0+0x60/0x11c
        do_el0_svc+0x30/0xc0
        el0_svc+0x58/0x100
        el0t_64_sync_handler+0x1b0/0x1bc
        el0t_64_sync+0x18c/0x190

Due to above reasons, remove the dynamic lane switching
code from adv7533 bridge chip and filter out the modes
which would need different number of lanes as compared
to the initialization time using the mode_valid callback.

This can be potentially re-introduced by using the pre_enable()
callback but this needs to be evaluated first whether such an
approach will work so this will be done with a separate change.

changes since RFC:
- Fix commit text and add TODO comment

changes in v2:
- Fix checkpatch formatting errors

Fixes: 62b2f026cd8e ("drm/bridge: adv7533: Change number of DSI lanes dynamically")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/16
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/1661797363-7564-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1665522649-3423-1-git-send-email-quic_abhinavk@quicinc.com

drm/crtc-helper: Add a drm_crtc_helper_atomic_check() helper

Provides a default CRTC state check handler for CRTCs that only have one
primary plane attached.

There are some drivers that duplicate this logic in their helpers, such as
simpledrm and ssd130x. Factor out this common code into a CRTC helper and
make drivers use it.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-5-javierm@redhat.com

drm/ssd130x: Do not call drm_atomic_add_affected_planes()

There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from ssd130x.

On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in ssd130x. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-4-javierm@redhat.com

drm/simpledrm: Do not call drm_atomic_add_affected_planes()

There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from simpledrm.

On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in simpledrm. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-3-javierm@redhat.com

drm/mgag200: Do not call drm_atomic_add_affected_planes()

There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from mgag200.

On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in mgag200. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-2-javierm@redhat.com

drm/nouveau/disp: fix cast removes address space of expression warnings

When build Linux kernel with 'make C=2', encounter the following warnings:

./drivers/gpu/drm/nouveau/dispnv50/disp.c:134:34: warning: cast removes address space '__iomem' of expression
./drivers/gpu/drm/nouveau/dispnv50/disp.c:197:34: warning: cast removes address space '__iomem' of expression

The data type of dmac->_push.mem.object.map.ptr is 'void __iomem *', but
converted to 'u32 *' directly and cause above warnings, now
recover their data types to fix these warnings.

Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220924092516.10007-1-ruanjinjie@huawei.com

drm: split build lists one per line and sort

While it takes more vertical space, sorted build lists with one object
per line are arguably easier to manage, especially when there are
conflicting changes.

Split anything with more than one object file.

v2: also split drm_cache.o and put it after drm_bridge.o (Andi)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com

drm/bridge: tc358775: Do not soft reset i2c-slave controller

Soft reset during tc_bridge_enable() is triggered by setting all available
reset control bits in the SYSRST register.
But as noted in the data sheet resetting the i2c-slave controller should
be only done over DSI and is only useful for chip debugging.
So do not set RSTI2CS (bit0).

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901131951.1116512-1-t.remmet@phytec.de

drm/vc4: vec: Fix definition of PAL-M mode

PAL-M is a Brazilian analog TV standard that uses a PAL-style chroma
subcarrier at 3.575611[888111] MHz on top of 525-line (480i60) timings.
This commit makes the driver actually use the proper VEC preset for this
mode instead of just changing PAL subcarrier frequency.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-25-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/modes: parse_cmdline: Add support for named modes containing dashes

It is fairly common for named video modes to contain dashes (e.g.
"tt-mid" on Atari, "dblntsc-ff" on Amiga).  Currently such mode names
are not recognized, as the dash is considered to be a separator between
mode name and bpp.

Fix this by skipping any dashes that are not followed immediately by a
digit when looking for the separator.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-13-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/modes: Only consider bpp and refresh before options

Some video= options might have a value that contains a dash. However, the
command line parsing mode considers all dashes as the separator between the
mode and the bpp count.

Let's rework the parsing code a bit to only consider a dash as the bpp
separator if it before a comma, the options separator.

A follow-up patch will add a unit-test for this once such an option is
introduced.

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-12-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/atomic: Add TV subconnector property to get/set_property

The subconnector property was created by drm_mode_create_tv_properties(),
but wasn't exposed to the userspace through the generic
atomic_get/set_property implementation, and wasn't stored in any generic
state structure.

Let's solve this.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-6-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/connector: Rename subconnector state variable

There is two TV subconnector related properties registered by
drm_mode_create_tv_properties(): subconnector and select subconnector.

While the select subconnector property is stored in the kernel by the
drm_tv_connector_state structure, the subconnector property isn't stored
anywhere.

Worse, the select subconnector property is stored in a field called
subconnector, creating some ambiguity about which property content we're
accessing.

Let's rename that field to one called select_subconnector to make it move
obvious what it's about.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-5-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/atomic-helper: Rename drm_atomic_helper_connector_tv_reset to avoid ambiguity

We currently have two sets of TV properties.

The first one is there to deal with analog TV properties, creating
properties such as the TV mode, subconnectors, saturation, hue and so on.
It's created by calling the drm_mode_create_tv_properties() function.

The second one is there to deal with properties that might be useful on a
TV, creating the overscan margins for example. It's created by calling the
drm_mode_create_tv_margin_properties().

However, we also have a drm_atomic_helper_connector_tv_reset() function
that will reset the TV margin properties to their default values, and thus
is supposed to be called for the latter set. This creates an ambiguity due
to the inconsistent naming.

We can thus rename the drm_atomic_helper_connector_tv_reset() function to
drm_atomic_helper_connector_tv_margins_reset() to remove that ambiguity
and hopefully make it more obvious.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-4-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/tests: Order Kunit tests in Makefile

Since we've recently added a ton of tests, the list starts to be a bit
of a mess and creates unneeded conflicts.

Let's order it alphabetically.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-2-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/atomic-helper: Replace drm_atomic_helper_check_crtc_state()

Rename the atomic helper function drm_atomic_helper_check_crtc_state()
to drm_atomic_helper_check_crtc_primary_plane() and only check for an
attached primary plane. Adapt callers.

Instead of having one big function to check for various CRTC state
conditions, we rather want smaller functions that drivers can pick
individually.

v5:
* rebase on top of udl changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de

drm/atomic-helper: Don't allocate new plane state in CRTC check

In drm_atomic_helper_check_crtc_state(), do not add a new plane state
to the global state if it does not exist already. Adding a new plane
state will result in overhead for the plane during the atomic-commit
step.

For the test in drm_atomic_helper_check_crtc_state() to succeed, it
is important that the CRTC has an enabled primary plane after the
commit. Simply testing the CRTC state's plane_mask for a primary plane
is sufficient.

Note that the helper still only tests for an attached primary plane.
Drivers have to ensure that the plane contains valid pixel information.

v5:
* fix commit description (Javier)
v3:
* test for a primary plane in plane_mask (Ville)
v2:
* remove unnecessary test for plane->crtc (Ville)
* inline drm_atomic_get_next_plane_state() (Ville)
* acquire plane lock before accessing plane->state (Ville)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: d6b9af1097fe ("drm/atomic-helper: Add helper drm_atomic_helper_check_crtc_state()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-2-tzimmermann@suse.de

drm/udl: Add constants for commands

Add constants for the various commands that the driver can send to
the device and update the respective helper functions. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-17-tzimmermann@suse.de

drm/udl: Add register constants for framebuffer scanout addresses

Add register constants for the framebuffer scanout addresses and
update the related helper functions. No functional changes.

v2:
* extract address bytes with helper macros (Javier)
* fix comments

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-16-tzimmermann@suse.de

drm/udl: Add register constants for video locks

Add register constants for the video lock. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-15-tzimmermann@suse.de

drm/udl: Add register constants for color depth

Add the register constants for setting the color depth. The driver
only uses 16bpp. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-14-tzimmermann@suse.de

drm/udl: Add constants for display-mode registers

Add constants for the registers the contain various display-mode
parameters and update the mode-setting function. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-13-tzimmermann@suse.de

drm/udl: Move register constants to udl_proto.h

Move the existing register constants to a new file in preparation of
adding more of them. Renaming is intentional. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-12-tzimmermann@suse.de

drm/udl: Use damage iterator

Use a damage iterator to process damage areas individually. Merging
damage areas can result in large updates of unchanged framebuffer
regions. As USB is rather slow, it's better to process damage areas
individually and hence minimize USB-transfered data.

As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into
the plane's atomic_update helper. To avoid overhead and intermediate
writers, we want to synchronize buffers and reserve access only once
before copying damage areas of the framebuffer.

v2:
* clarify commit message (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-11-tzimmermann@suse.de

drm/udl: Support DRM hot-unplugging

Add drm_dev_enter() and drm_dev_exit() to the various modesetting
functions that interact with the device. After hot-unplugging the
device, these functions will return early. So far, the udl driver
relied on USB interfaces to handle unplugging of the device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-10-tzimmermann@suse.de

drm/udl: Simplify modesetting in CRTC's enable function

Inline a modesetting helper in the CRTC's enable function. Build the
command set directly in the USB URB's buffer and drop an intermediate
buffer. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-9-tzimmermann@suse.de

drm/udl: Convert to atomic-modesetting helpers

Replace simple-KMS helpers with regular atomic-modesetting helpers.
The simple-KMS helpers introduce a mid-layer abstraction without
added functionality. Using regular atomic helpers makes the driver's
implementation more discoverable and simplifies code sharing.

The conversion effectively open-codes the simple-KMS functions and
data structure within udl. No functional changes.

v2:
* don't use the atomic_disable plane helper

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-8-tzimmermann@suse.de

drm/udl: Remove udl_simple_display_pipe_mode_valid()

Remove the empty function udl_simple_display_pipe_mode_valid() and
let simple-KMS helpers accept the modes. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-7-tzimmermann@suse.de

drm/udl: Move connector to modesetting code

Move the connector next to the rest of the modesetting code. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-6-tzimmermann@suse.de

drm/udl: Various improvements to the connector

Add style fixes, better error handling and reporting, and minor
clean-up changes to the connector code before moving the code to
the rest of the modesetting pipeline.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-5-tzimmermann@suse.de

drm/udl: Use USB timeout constant when reading EDID

Set the USB control-message timeout to the USB default of 5 seconds.
Done for consistency with other uses of usb_control_msg() in udl and
other drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-4-tzimmermann@suse.de

drm/udl: Test pixel limit in mode-config's mode-valid function

The sku_pixel_limit is a per-device property, similar to the amount
of available video memory. Move the respective mode-valid test from
the connector to the mode-config structure.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-3-tzimmermann@suse.de

drm/udl: Rename struct udl_drm_connector to struct udl_connector

Remove the _drm_ infix from struct udl_drm_connector and introduce a
macro for upcasting from struct drm_connector. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-2-tzimmermann@suse.de

drm/fourcc: add Vivante tile status modifiers

The tile status modifiers can be combined with all of the usual
color buffer modifiers. When they are present an additional plane
is added to the surfaces to share the tile status buffer. The
TS modifiers describe the interpretation of the tag bits in this
buffer.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909093000.3458413-1-l.stach@pengutronix.de

drm/ssd130x: Iterate over damage clips instead of using a merged rect

The drm_atomic_helper_damage_merged() helper merges all the damage clips
into one rectangle. If there are multiple damage clips that aren't close
to each other, the resulting rectangle could be quite big.

Instead of using that function helper, iterate over all the damage clips
and update them one by one.

Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930152944.2584356-1-javierm@redhat.com

drm/ast: Add Atomic gamma lut support for aspeed

The current ast driver only supports legacy gamma interface.
This also fixes a Gnome3/Wayland error which incorrectly adds
gamma to atomic commit:
"Page flip discarded: CRTC property (GAMMA_LUT) not found"

I only tested remotely, so I wasn't able to check that it had
an effect on the VGA output. But when activating "Night Light"
in Gnome, ast_crtc_load_lut() is called.

v2: use the same functions as mgag200.
    handle 16bits color mode.

v3: Check gamma_lut size in atomic check.

v4: revert 16bits mode, v1 was correct.
    make sure gamma table are set when primary plane format
    changes.
    remove rgb888 format that is not used.

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930094754.745626-1-jfalempe@redhat.com

drm/bridge: ps8640: Add software to support aux defer

This chip can not handle aux defer if the host directly program
its aux registers to access edid/dpcd. So we need let software
to handle the aux defer situation.

Signed-off-by: Jason Yen <jason.yen@paradetech.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930042506.2529522-1-jason.yen@paradetech.corp-partner.google.com

drm/sched: add missing NULL check in drm_sched_get_cleanup_job v2

Otherwise we would crash if the job is not resubmitted.

v2: fix second usage of s_fence->parent as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004132831.134986-1-christian.koenig@amd.com

drm/scheduler: fix fence ref counting

We leaked dependency fences when processes were beeing killed.

Additional to that grab a reference to the last scheduled fence.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929180151.139751-1-christian.koenig@amd.com

drm/edid: Make version checks less convoluted

Get rid of the confusing version_greater() stuff and
simply compare edid->revision directly everwhere. Half
the places already did it this way, and since we actually
reject any EDID with edid->version!=1 it's a perfectly
sane thing to do.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-9-ville.syrjala@linux.intel.com

drm/edid: Unconfuse preferred timing stuff a bit

For EDID 1.4 the first detailed timing is always preferred,
for older EDIDs there was a feature flag to indicate the same.
While correct, the code setting that up is rather confusing.
Restate it in a slightly more straightforward manner.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-8-ville.syrjala@linux.intel.com

drm/edid: Use the correct formula for standard timings

Prefer the timing formula indicated by the range
descriptor for generating the non-DMT standard timings.

Previously we just used CVT for all EDID 1.4 continuous
frequency displays without even checking if the range
descriptor indicates otherwise. Now we check the range
descriptor first, and fall back to CVT if nothing else
was indicated. EDID 1.4 more or less deprecates GTF/GTF2
but there are still a lot of 1.4 EDIDs out there that
don't advertise CVT support, so seems safer to use the
formula the EDID actually reports as supported.

For EDID 1.3 we use GTF2 if indicated (as before), and for
EDID 1.2+ we now just use GTF without even checking the
feature flag. There seem to be quite a few EDIDs out there that
don't set the GTF feature flag but still include a GTF range
descriptor and non-DMT standard timings.

This to me seems to be roughly what appendix B of EDID 1.4
suggests should be done.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-7-ville.syrjala@linux.intel.com

drm/edid: Use GTF2 for inferred modes

For some reason we only use the secondary GTF curve for the
standard timings. Use it for inferred modes as well.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-6-ville.syrjala@linux.intel.com

drm/edid: Extract drm_gtf2_mode()

Extract the GTF vs. GTF2 logic into a separate function.
We'll have a second user soon.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-5-ville.syrjala@linux.intel.com

drm/edid: Only parse VRR range for continuous frequency displays

Since we only use the parsed vrefresh range to determine
if VRR should be supported we should only accept continuous
frequency displays here.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-4-ville.syrjala@linux.intel.com

drm/edid: Define more flags

Replace a bunch of hex constants with proper definitions.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-3-ville.syrjala@linux.intel.com

drm/edid: Clarify why we only accept the "range limits only" descriptor

The current comment fails to clarify why we only accept
the "range limits only" variant of the range descriptor.
Reword it to make some actual sense.

Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-2-ville.syrjala@linux.intel.com

drm/edid: Avoid multiple log lines for HFVSDB parsing

Replace multiple log lines with a single log line at the end of
parsing HF-VSDB. Also use drm_dbg_kms instead of DRM_DBG_KMS, and
add log for DSC1.2 support.

v2: Fixed the formatting issues in the logging (Jani).

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-5-ankit.k.nautiyal@intel.com

drm/edid: Refactor HFVSDB parsing for DSC1.2

DSC capabilities are given in bytes 11-13 of VSDB (i.e. bytes 8-10 of
SCDS). Since minimum length of Data block is 7, all bytes greater than 7
must be read only after checking the length of the data block.

This patch adds check for data block length before reading relavant DSC
bytes.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-4-ankit.k.nautiyal@intel.com

drm/edid: Split DSC parsing into separate function

Move the DSC parsing logic into separate function.

v2: Rebase.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-3-ankit.k.nautiyal@intel.com

drm/edid: Fix minimum bpc supported with DSC1.2 for HDMI sink

HF-VSDB/SCDB has bits to advertise support for 16, 12 and 10 bpc.
If none of the bits are set, the minimum bpc supported with DSC is 8.

This patch corrects the min bpc supported to be 8, instead of 0.

Fixes: 76ee7b905678 ("drm/edid: Parse DSC1.2 cap fields from HFVSDB block")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
v2: s/DSC1.2/DSC 1.2

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-2-ankit.k.nautiyal@intel.com

drm: document uAPI page-flip flags

Document flags accepted by the page-flip and atomic IOCTLs.

v2 (Pekka):
- Mention DRM_EVENT_FLIP_COMPLETE in DRM_MODE_PAGE_FLIP_EVENT docs.
- Expand DRM_MODE_ATOMIC_NONBLOCK and DRM_MODE_ATOMIC_ALLOW_MODESET
  description.
v3:
- Fix struct field ref syntax (Daniel)
- Clarify when artifacts are no longer displayed (Daniel)
- Add note about sinks deciding to show artifacts on their own (Pekka, Daniel)
v4:
- Fix typo (Pekka)

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/505107/

drm/edid: fix repeated words in comments

Delete the redundant word 'on'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907113644.32831-1-yuanjilin@cdjrlc.com

drm/bridge: it6505: Add pre_enable/post_disable callback

Add atomic_pre_enable and atomic_post_disable callback to make sure the
bridge is not powered off until atomic_post_disable is called. This
prevents a power leakage when it6505 is powered off, but the upstream
DRM bridge is still sending display signals.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004044943.2407781-3-treapking@chromium.org

drm/bridge: it6505: Adapt runtime power management framework

Use pm_runtime_(get|put)_sync to control the bridge power, and add
SET_SYSTEM_SLEEP_PM_OPS with pm_runtime_force_(suspend|resume) to it6505
driver. Without SET_SYSTEM_SLEEP_PM_OPS, the bridge will be powered on
unnecessarily when no external display is connected.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004044943.2407781-2-treapking@chromium.org

drm/panel: ws2401: Silent no spi_device_id warning

Add spi_device_id entries to silent following SPI warning:

SPI driver ws2401-panel has no spi_device_id for samsung,lms380kf01

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915163437.2519754-1-weiyongjun@huaweicloud.com

drm/panel: tpg110: Silent no spi_device_id warning

Add spi_device_id entries to silent following SPI warning:

SPI driver tpo-tpg110-panel has no spi_device_id for tpo,tpg110

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915163431.2519736-1-weiyongjun@huaweicloud.com

drm/panel: db7430: Silent no spi_device_id warning

Add spi_device_id entries to silent following SPI warning:

SPI driver db7430-panel has no spi_device_id for samsung,lms397kf04

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220915163156.2519577-1-weiyongjun@huaweicloud.com

drm/sched: Add FIFO sched policy to run queue

When many entities are competing for the same run queue
on the same scheduler, we observe an unusually long wait
times and some jobs get starved. This has been observed on GPUVis.

The issue is due to the Round Robin policy used by schedulers
to pick up the next entity's job queue for execution. Under stress
of many entities and long job queues within entity some
jobs could be stuck for very long time in it's entity's
queue before being popped from the queue and executed
while for other entities with smaller job queues a job
might execute earlier even though that job arrived later
then the job in the long queue.

Fix:
Add FIFO selection policy to entities in run queue, chose next entity
on run queue in such order that if job on one entity arrived
earlier then job on another entity the first job will start
executing earlier regardless of the length of the entity's job
queue.

v2:
Switch to rb tree structure for entities based on TS of
oldest job waiting in the job queue of an entity. Improves next
entity extraction to O(1). Entity TS update
O(log N) where N is the number of entities in the run-queue

Drop default option in module control parameter.

v3:
Various cosmetical fixes and minor refactoring of fifo update function. (Luben)

v4:
Switch drm_sched_rq_select_entity_fifo to in order search (Luben)

v5: Fix up drm_sched_rq_select_entity_fifo loop (Luben)

v6: Add missing drm_sched_rq_remove_fifo_locked

v7: Fix ts sampling bug and more cosmetic stuff (Luben)

v8: Fix module parameter string (Luben)

Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Tested-by: Yunxiang Li (Teddy) <Yunxiang.Li@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930041258.1050247-1-luben.tuikov@amd.com

drm/panel: simple: Use dev_err_probe() to simplify code

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-3-yuancan@huawei.com

drm/panel: panel-edp: Use dev_err_probe() to simplify code

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-2-yuancan@huawei.com
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-2-yuancan@huawei.com

drm/panel: simple: Add Multi-Inno Technology MI0800FT-9

Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com

dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel

Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel
compatible string.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220812114600.4895-1-cniedermaier@dh-electronics.com

drm/bridge: lt8912b: fix corrupted image output

Correct I2C address for the register list in lt8912_write_lvds_config(),
these registers are on the first I2C address (0x48), the current
function is just writing garbage to the wrong registers and this creates
multiple issues (artifacts and output completely corrupted) on some HDMI
displays.

Correct I2C address comes from Lontium documentation and it is the one
used on other out-of-tree LT8912B drivers [1].

[1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch

drm/bridge: lt8912b: set hdmi or dvi mode

The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch

drm/bridge: lt8912b: add vsync hsync

Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge from the EDID that was read out from the display.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch

drm/dp: Don't rewrite link config when setting phy test pattern

The sequence for Source DP PHY CTS automation is [2][1]:
1- Emulate successful Link Training(LT)
2- Short HPD and change link rates and number of lanes by LT.
(This is same flow for Link Layer CTS)
3- Short HPD and change PHY test pattern and swing/pre-emphasis
levels (This step should not trigger LT)

The problem is with DP PHY compliance setup as follow:

     [DPTX + on board LTTPR]------Main Link--->[Scope]
                    ^                         |
|                         |
|                         |
----------Aux Ch------>[Aux Emulator]

At step 3, before writing TRAINING_LANEx_SET/LINK_QUAL_PATTERN_SET
to declare the pattern/swing requested by scope, we write link
config in LINK_BW_SET/LANE_COUNT_SET on a port that has LTTPR.
As LTTPR snoops aux transaction, LINK_BW_SET/LANE_COUNT_SET writes
indicate a LT will start [Check DP 2.0 E11 -Sec 3.6.8.2 & 3.6.8.6.3],
and LTTPR will reset the link and stop sending DP signals to
DPTX/Scope causing the measurements to fail. Note that step 3 will
not trigger LT and DP link will never recovered by the
Aux Emulator/Scope.

The reset of link can be tested with a monitor connected to LTTPR
port simply by writing to LINK_BW_SET or LANE_COUNT_SET as follow

  igt/tools/dpcd_reg write --offset=0x100 --value 0x14 --device=2

OR

  printf '\x14' | sudo dd of=/dev/drm_dp_aux2 bs=1 count=1 conv=notrunc
  seek=$((0x100))

This single aux write causes the screen to blank, sending short HPD to
DPTX, setting LINK_STATUS_UPDATE = 1 in DPCD 0x204, and triggering LT.

As stated in [1]:
"Before any TX electrical testing can be performed, the link between a
DPTX and DPRX (in this case, a piece of test equipment), including all
LTTPRs within the path, shall be trained as defined in this Standard."

In addition, changing Phy pattern/Swing/Pre-emphasis (Step 3) uses the
same link rate and lane count applied on step 2, so no need to redo LT.

The fix is to not rewrite link config in step 3, and just writes
TRAINING_LANEx_SET and LINK_QUAL_PATTERN_SET

[1]: DP 2.0 E11 - 3.6.11.1 LTTPR DPTX_PHY Electrical Compliance

[2]: Configuring UnigrafDPTC Controller - Automation Test Sequence
https://www.keysight.com/us/en/assets/9922-01244/help-files/
D9040DPPC-DisplayPort-Test-Software-Online-Help-latest.chm

Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Or Cochvi <or.cochvi@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916054900.415804-1-khaled.almahallawy@intel.com

drm/framebuffer: convert to drm_dbg_kms()

Replace DRM_DEBUG_KMS() with drm_dbg_kms() which allows specifying
the DRM device to provide more context.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905103559.118561-1-contact@emersion.fr

drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_gray8()

Extend the existing test cases to test the conversion from XRGB8888 to
grayscale.

Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926080837.65734-4-jose.exposito89@gmail.com

drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()

Extend the existing test cases to test the conversion from XRGB8888 to
XRGB2101010.

In order to be able to call drm_fb_xrgb8888_to_xrgb2101010() when
compiling CONFIG_DRM_KMS_HELPER as a module export the symbol.

Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926080837.65734-3-jose.exposito89@gmail.com

drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb888()

Extend the existing test cases to test the conversion from XRGB8888 to
RGB888.

Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926080837.65734-2-jose.exposito89@gmail.com

drm/panel-edp: Add BOE NT116WHM-N4C (HW: V8.1)

Add support for the BOE - NT116WHM-N4C (HW: V8.1) panel.

Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927063524.493591-1-sean.hong@quanta.corp-partner.google.com

drm/panel-edp: Fix delays for INX N116BCA-EA2 (HW: C1)

This panel has the same delay timing as N116BCA-EA1. So, fix the
delay timing from delay_200_500_p2e80 to delay_200_500_e80_d50.

Fixes: c7bcc1056cff ("drm/panel-edp: Add INX N116BCA-EA2")
Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927021835.488803-1-sean.hong@quanta.corp-partner.google.com

drm/panel-edp: Fix delays for INX N116BCN-EA1 (HW: C4)

This panel has the same delay timing as N116BCA-EA1. So, fix the
delay timing from delay_200_500_p2e80 to delay_200_500_e80_d50.

Fixes: 9f4a57148120 ("drm/panel-edp: Add INX N116BCN-EA1")
Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927021021.488295-1-sean.hong@quanta.corp-partner.google.com

drm/ssd130x: Synchronize access to dma-buf imported GEM BOs

Synchronize CPU access to GEM BOs with other drivers when updating the
screen buffer. Imported DMA buffers might otherwise contain stale data.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927095249.1919385-1-javierm@redhat.com

drm/ssd130x: Use drm_atomic_get_new_plane_state()

The struct drm_plane .state shouldn't be accessed directly but instead the
drm_atomic_get_new_plane_state() helper function should be used.

This is based on a similar patch from Thomas Zimmermann for the simpledrm
driver. No functional changes.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923083447.1679780-1-javierm@redhat.com

drm/simpledrm: Synchronize access to GEM BOs

Synchronize CPU access to GEM BOs with other drivers when updating the
screen buffer. Imported buffers might otherwise contain stale data.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-6-tzimmermann@suse.de

drm/simpledrm: Iterate over damage clips

Iterate over all damage clips and updated them one by one. Replaces
the merging of damage areas, which can result in significant overhead
if damage areas are not close to each other.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-5-tzimmermann@suse.de

drm/simpledrm: Remove !fb check from atomic_update

The primary plane implements atomic_disable, so atomic_update will
not be called without a framebuffer set. Remove the test for !fb.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-4-tzimmermann@suse.de

drm/simpledrm: Use drm_atomic_get_new_plane_state()

Lookup the plane's state in atomic_update with the helper
drm_atomic_get_new_plane_state(). Also rename the helpers'
state arguments. No functional changes.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-3-tzimmermann@suse.de

drm/simpledrm: Compute linestride with drm_format_info_min_pitch()

If not given, compute the stride with drm_format_info_min_pitch(). It's
the standard helper for this purpose.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: fd9e3169e42b ("drm/simpledrm: Compute framebuffer stride if not set")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-2-tzimmermann@suse.de

drm/panel-edp: Add INX N116BCA-EA2

Add support for the INX - N116BCA-EA2 (HW: C1) panel

Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926100839.482804-1-sean.hong@quanta.corp-partner.google.com

drm/ttm: add dma_resv_assert_held() calls to vmap/vunmap

Let's make sure nobody is calling those functions without holding the
appropriate locks.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715111533.467012-2-christian.koenig@amd.com

drm/ast: make ast_modeset static

The symbol is not used outside of the file, so mark it static.

Fixes the following warning:

drivers/gpu/drm/ast/ast_drv.c:42:5: warning: symbol 'ast_modeset'
was not declared. Should it be static?

Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926023253.739699-1-ruanjinjie@huawei.com

drm/panel-edp: Add AUO B116XAK01.6

Add support for the AUO - B116XAK01.6 (HW: 1A) panel.

Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923055133.302740-1-sean.hong@quanta.corp-partner.google.com

drm/panel-edp: Add BOE NT116WHM-N21

Add support for the BOE - NT116WHM-N21 (HW: V8.2) panel.

Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923054614.302440-1-sean.hong@quanta.corp-partner.google.com

drm/panel-edp: Add BOE NT116WHM-N21 (HW: V8.1)

Add support for the BOE - NT116WHM-N21 (HW: V8.1) panel.

Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923085028.306790-1-sean.hong@quanta.corp-partner.google.com

drm/panel-edp: Add INX N116BCN-EA1

Add support for the INX - N116BCN-EA1 (HW: C4) panel.

Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923053729.301626-1-sean.hong@quanta.corp-partner.google.com

virtio-gpu: fix shift wrapping bug in virtio_gpu_fence_event_create()

The ->ring_idx_mask variable is a u64 so static checkers, Smatch in
this case, complain if the BIT() is not also a u64.

drivers/gpu/drm/virtio/virtgpu_ioctl.c:50 virtio_gpu_fence_event_create()
warn: should '(1 << ring_idx)' be a 64 bit type?

Fixes: cd7f5ca33585 ("drm/virtio: implement context init: add virtio_gpu_fence_event")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YygN7jY0GdUSQSy0@kili
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/qxl: drop set_prod_notify parameter from qxl_ring_create

Since qxl_io_reset(qdev) will be called immediately
after qxl_ring_create() been called,
and parameter like notify_on_prod will be set to default value.
So the call to qxl_ring_init_hdr() before becomes meaningless.

Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Suggested-by: Ming Xie<xieming@kylinos.cn>
Link: http://patchwork.freedesktop.org/patch/msgid/20220920065023.1633303-1-zhouzongmin@kylinos.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/meson: remove drm bridges at aggregate driver unbind time

drm bridges added by meson_encoder_hdmi_init and meson_encoder_cvbs_init
were not manually removed at module unload time, which caused dangling
references to freed memory to remain linked in the global bridge_list.

When loading the driver modules back in, the same functions would again
call drm_bridge_add, and when traversing the global bridge_list, would
end up peeking into freed memory.

Once again KASAN revealed the problem:

[  +0.000095] =============================================================
[  +0.000008] BUG: KASAN: use-after-free in __list_add_valid+0x9c/0x120
[  +0.000018] Read of size 8 at addr ffff00003da291f0 by task modprobe/2483

[  +0.000018] CPU: 3 PID: 2483 Comm: modprobe Tainted: G         C O      5.19.0-rc6-lrmbkasan+ #1
[  +0.000011] Hardware name: Hardkernel ODROID-N2Plus (DT)
[  +0.000008] Call trace:
[  +0.000006]  dump_backtrace+0x1ec/0x280
[  +0.000012]  show_stack+0x24/0x80
[  +0.000008]  dump_stack_lvl+0x98/0xd4
[  +0.000011]  print_address_description.constprop.0+0x80/0x520
[  +0.000011]  print_report+0x128/0x260
[  +0.000008]  kasan_report+0xb8/0xfc
[  +0.000008]  __asan_report_load8_noabort+0x3c/0x50
[  +0.000009]  __list_add_valid+0x9c/0x120
[  +0.000009]  drm_bridge_add+0x6c/0x104 [drm]
[  +0.000165]  dw_hdmi_probe+0x1900/0x2360 [dw_hdmi]
[  +0.000022]  meson_dw_hdmi_bind+0x520/0x814 [meson_dw_hdmi]
[  +0.000014]  component_bind+0x174/0x520
[  +0.000012]  component_bind_all+0x1a8/0x38c
[  +0.000010]  meson_drv_bind_master+0x5e8/0xb74 [meson_drm]
[  +0.000032]  meson_drv_bind+0x20/0x2c [meson_drm]
[  +0.000027]  try_to_bring_up_aggregate_device+0x19c/0x390
[  +0.000010]  component_master_add_with_match+0x1c8/0x284
[  +0.000009]  meson_drv_probe+0x274/0x280 [meson_drm]
[  +0.000026]  platform_probe+0xd0/0x220
[  +0.000009]  really_probe+0x3ac/0xa80
[  +0.000009]  __driver_probe_device+0x1f8/0x400
[  +0.000009]  driver_probe_device+0x68/0x1b0
[  +0.000009]  __driver_attach+0x20c/0x480
[  +0.000008]  bus_for_each_dev+0x114/0x1b0
[  +0.000009]  driver_attach+0x48/0x64
[  +0.000008]  bus_add_driver+0x390/0x564
[  +0.000009]  driver_register+0x1a8/0x3e4
[  +0.000009]  __platform_driver_register+0x6c/0x94
[  +0.000008]  meson_drm_platform_driver_init+0x3c/0x1000 [meson_drm]
[  +0.000027]  do_one_initcall+0xc4/0x2b0
[  +0.000011]  do_init_module+0x154/0x570
[  +0.000011]  load_module+0x1a78/0x1ea4
[  +0.000008]  __do_sys_init_module+0x184/0x1cc
[  +0.000009]  __arm64_sys_init_module+0x78/0xb0
[  +0.000009]  invoke_syscall+0x74/0x260
[  +0.000009]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000008]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000012]  el0t_64_sync_handler+0x11c/0x150
[  +0.000008]  el0t_64_sync+0x18c/0x190

[  +0.000016] Allocated by task 879:
[  +0.000008]  kasan_save_stack+0x2c/0x5c
[  +0.000011]  __kasan_kmalloc+0x90/0xd0
[  +0.000007]  __kmalloc+0x278/0x4a0
[  +0.000011]  mpi_resize+0x13c/0x1d0
[  +0.000011]  mpi_powm+0xd24/0x1570
[  +0.000009]  rsa_enc+0x1a4/0x30c
[  +0.000009]  pkcs1pad_verify+0x3f0/0x580
[  +0.000009]  public_key_verify_signature+0x7a8/0xba4
[  +0.000010]  public_key_verify_signature_2+0x40/0x60
[  +0.000008]  verify_signature+0xb4/0x114
[  +0.000008]  pkcs7_validate_trust_one.constprop.0+0x3b8/0x574
[  +0.000009]  pkcs7_validate_trust+0xb8/0x15c
[  +0.000008]  verify_pkcs7_message_sig+0xec/0x1b0
[  +0.000012]  verify_pkcs7_signature+0x78/0xac
[  +0.000007]  mod_verify_sig+0x110/0x190
[  +0.000009]  module_sig_check+0x114/0x1e0
[  +0.000009]  load_module+0xa0/0x1ea4
[  +0.000008]  __do_sys_init_module+0x184/0x1cc
[  +0.000008]  __arm64_sys_init_module+0x78/0xb0
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000009]  el0_svc_common.constprop.0+0x1a8/0x260
[  +0.000008]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000009]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190

[  +0.000013] Freed by task 2422:
[  +0.000008]  kasan_save_stack+0x2c/0x5c
[  +0.000009]  kasan_set_track+0x2c/0x40
[  +0.000007]  kasan_set_free_info+0x28/0x50
[  +0.000009]  ____kasan_slab_free+0x128/0x1d4
[  +0.000008]  __kasan_slab_free+0x18/0x24
[  +0.000007]  slab_free_freelist_hook+0x108/0x230
[  +0.000010]  kfree+0x110/0x35c
[  +0.000008]  release_nodes+0xf0/0x16c
[  +0.000009]  devres_release_group+0x180/0x270
[  +0.000008]  take_down_aggregate_device+0xcc/0x160
[  +0.000010]  component_del+0x18c/0x360
[  +0.000009]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[  +0.000013]  platform_remove+0x64/0xb0
[  +0.000008]  device_remove+0xb8/0x154
[  +0.000009]  device_release_driver_internal+0x398/0x5b0
[  +0.000009]  driver_detach+0xac/0x1b0
[  +0.000009]  bus_remove_driver+0x158/0x29c
[  +0.000008]  driver_unregister+0x70/0xb0
[  +0.000009]  platform_driver_unregister+0x20/0x2c
[  +0.000007]  meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[  +0.000012]  __do_sys_delete_module+0x288/0x400
[  +0.000009]  __arm64_sys_delete_module+0x5c/0x80
[  +0.000009]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000008]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000008]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190

[  +0.000013] The buggy address belongs to the object at ffff00003da29000
               which belongs to the cache kmalloc-1k of size 1024
[  +0.000008] The buggy address is located 496 bytes inside of
               1024-byte region [ffff00003da29000, ffff00003da29400)

[  +0.000015] The buggy address belongs to the physical page:
[  +0.000009] page:fffffc0000f68a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3da28
[  +0.000012] head:fffffc0000f68a00 order:3 compound_mapcount:0 compound_pincount:0
[  +0.000009] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[  +0.000019] raw: 0ffff00000010200 fffffc0000eb5c08 fffffc0000d96608 ffff000000002a80
[  +0.000008] raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
[  +0.000008] page dumped because: kasan: bad access detected

[  +0.000011] Memory state around the buggy address:
[  +0.000009]  ffff00003da29080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]  ffff00003da29100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] >ffff00003da29180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]                                                              ^
[  +0.000008]  ffff00003da29200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000006]  ffff00003da29280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] ==================================================================

Fix by keeping track of which encoders were initialised in the meson_drm
structure and manually removing their bridges at aggregate driver's unbind
time.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220920222842.1053234-1-adrian.larumbe@collabora.com

drm/meson: explicitly remove aggregate driver at module unload time

Because component_master_del wasn't being called when unloading the
meson_drm module, the aggregate device would linger forever in the global
aggregate_devices list. That means when unloading and reloading the
meson_dw_hdmi module, component_add would call into
try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate
device.

This would in turn dereference some of the aggregate_device's struct
entries which point to memory automatically freed by the devres API when
unbinding the aggregate device from meson_drv_unbind, and trigger an
use-after-free bug:

[  +0.000014] =============================================================
[  +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500
[  +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536
[  +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G         C O      5.19.0-rc6-lrmbkasan+ #1
[  +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT)
[  +0.000008] Call trace:
[  +0.000005]  dump_backtrace+0x1ec/0x280
[  +0.000011]  show_stack+0x24/0x80
[  +0.000007]  dump_stack_lvl+0x98/0xd4
[  +0.000010]  print_address_description.constprop.0+0x80/0x520
[  +0.000011]  print_report+0x128/0x260
[  +0.000007]  kasan_report+0xb8/0xfc
[  +0.000007]  __asan_report_load8_noabort+0x3c/0x50
[  +0.000009]  find_components+0x468/0x500
[  +0.000008]  try_to_bring_up_aggregate_device+0x64/0x390
[  +0.000009]  __component_add+0x1dc/0x49c
[  +0.000009]  component_add+0x20/0x30
[  +0.000008]  meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi]
[  +0.000013]  platform_probe+0xd0/0x220
[  +0.000008]  really_probe+0x3ac/0xa80
[  +0.000008]  __driver_probe_device+0x1f8/0x400
[  +0.000008]  driver_probe_device+0x68/0x1b0
[  +0.000008]  __driver_attach+0x20c/0x480
[  +0.000009]  bus_for_each_dev+0x114/0x1b0
[  +0.000007]  driver_attach+0x48/0x64
[  +0.000009]  bus_add_driver+0x390/0x564
[  +0.000007]  driver_register+0x1a8/0x3e4
[  +0.000009]  __platform_driver_register+0x6c/0x94
[  +0.000007]  meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi]
[  +0.000014]  do_one_initcall+0xc4/0x2b0
[  +0.000008]  do_init_module+0x154/0x570
[  +0.000010]  load_module+0x1a78/0x1ea4
[  +0.000008]  __do_sys_init_module+0x184/0x1cc
[  +0.000008]  __arm64_sys_init_module+0x78/0xb0
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000009]  do_el0_svc+0x50/0x70
[  +0.000008]  el0_svc+0x68/0x1a0
[  +0.000009]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190

[  +0.000014] Allocated by task 902:
[  +0.000007]  kasan_save_stack+0x2c/0x5c
[  +0.000009]  __kasan_kmalloc+0x90/0xd0
[  +0.000007]  __kmalloc_node+0x240/0x580
[  +0.000010]  memcg_alloc_slab_cgroups+0xa4/0x1ac
[  +0.000010]  memcg_slab_post_alloc_hook+0xbc/0x4c0
[  +0.000008]  kmem_cache_alloc_node+0x1d0/0x490
[  +0.000009]  __alloc_skb+0x1d4/0x310
[  +0.000010]  alloc_skb_with_frags+0x8c/0x620
[  +0.000008]  sock_alloc_send_pskb+0x5ac/0x6d0
[  +0.000010]  unix_dgram_sendmsg+0x2e0/0x12f0
[  +0.000010]  sock_sendmsg+0xcc/0x110
[  +0.000007]  sock_write_iter+0x1d0/0x304
[  +0.000008]  new_sync_write+0x364/0x460
[  +0.000007]  vfs_write+0x420/0x5ac
[  +0.000008]  ksys_write+0x19c/0x1f0
[  +0.000008]  __arm64_sys_write+0x78/0xb0
[  +0.000007]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0x1a8/0x260
[  +0.000009]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000008]  el0t_64_sync_handler+0x11c/0x150
[  +0.000008]  el0t_64_sync+0x18c/0x190

[  +0.000013] Freed by task 2509:
[  +0.000008]  kasan_save_stack+0x2c/0x5c
[  +0.000007]  kasan_set_track+0x2c/0x40
[  +0.000008]  kasan_set_free_info+0x28/0x50
[  +0.000008]  ____kasan_slab_free+0x128/0x1d4
[  +0.000008]  __kasan_slab_free+0x18/0x24
[  +0.000007]  slab_free_freelist_hook+0x108/0x230
[  +0.000010]  kfree+0x110/0x35c
[  +0.000008]  release_nodes+0xf0/0x16c
[  +0.000008]  devres_release_all+0xfc/0x180
[  +0.000008]  device_unbind_cleanup+0x24/0x164
[  +0.000008]  device_release_driver_internal+0x3e8/0x5b0
[  +0.000010]  driver_detach+0xac/0x1b0
[  +0.000008]  bus_remove_driver+0x158/0x29c
[  +0.000008]  driver_unregister+0x70/0xb0
[  +0.000009]  platform_driver_unregister+0x20/0x2c
[  +0.000007]  0xffff800003722d98
[  +0.000012]  __do_sys_delete_module+0x288/0x400
[  +0.000009]  __arm64_sys_delete_module+0x5c/0x80
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000008]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000008]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190

[  +0.000013] Last potentially related work creation:
[  +0.000007]  kasan_save_stack+0x2c/0x5c
[  +0.000007]  __kasan_record_aux_stack+0xb8/0xf0
[  +0.000009]  kasan_record_aux_stack_noalloc+0x14/0x20
[  +0.000008]  insert_work+0x54/0x290
[  +0.000009]  __queue_work+0x48c/0xd24
[  +0.000008]  queue_work_on+0x90/0x11c
[  +0.000008]  call_usermodehelper_exec+0x188/0x404
[  +0.000010]  kobject_uevent_env+0x5a8/0x794
[  +0.000010]  kobject_uevent+0x14/0x20
[  +0.000008]  driver_register+0x230/0x3e4
[  +0.000009]  __platform_driver_register+0x6c/0x94
[  +0.000007]  gxbb_driver_init+0x28/0x34
[  +0.000010]  do_one_initcall+0xc4/0x2b0
[  +0.000008]  do_initcalls+0x20c/0x24c
[  +0.000010]  kernel_init_freeable+0x22c/0x278
[  +0.000009]  kernel_init+0x3c/0x170
[  +0.000008]  ret_from_fork+0x10/0x20

[  +0.000013] The buggy address belongs to the object at ffff000006731600
               which belongs to the cache kmalloc-256 of size 256
[  +0.000009] The buggy address is located 136 bytes inside of
               256-byte region [ffff000006731600, ffff000006731700)

[  +0.000015] The buggy address belongs to the physical page:
[  +0.000008] page:fffffc000019cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff000006730a00 pfn:0x6730
[  +0.000011] head:fffffc000019cc00 order:2 compound_mapcount:0 compound_pincount:0
[  +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[  +0.000016] raw: 0ffff00000010200 fffffc00000c3d08 fffffc0000ef2b08 ffff000000002680
[  +0.000009] raw: ffff000006730a00 0000000000150014 00000001ffffffff 0000000000000000
[  +0.000006] page dumped because: kasan: bad access detected

[  +0.000011] Memory state around the buggy address:
[  +0.000007]  ffff000006731580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000007]  ffff000006731600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] >ffff000006731680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]                       ^
[  +0.000006]  ffff000006731700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000007]  ffff000006731780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  +0.000006] ==================================================================

Fix by adding 'remove' driver callback for meson-drm, and explicitly deleting the
aggregate device.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-3-adrian.larumbe@collabora.com

drm/meson: reorder driver deinit sequence to fix use-after-free bug

Unloading the driver triggers the following KASAN warning:

[  +0.006275] =============================================================
[  +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0
[  +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695

[  +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G         C O      5.19.0-rc6-lrmbkasan+ #1
[  +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT)
[  +0.000008] Call trace:
[  +0.000007]  dump_backtrace+0x1ec/0x280
[  +0.000013]  show_stack+0x24/0x80
[  +0.000008]  dump_stack_lvl+0x98/0xd4
[  +0.000011]  print_address_description.constprop.0+0x80/0x520
[  +0.000011]  print_report+0x128/0x260
[  +0.000007]  kasan_report+0xb8/0xfc
[  +0.000008]  __asan_report_load8_noabort+0x3c/0x50
[  +0.000010]  __list_del_entry_valid+0xe0/0x1a0
[  +0.000009]  drm_atomic_private_obj_fini+0x30/0x200 [drm]
[  +0.000172]  drm_bridge_detach+0x94/0x260 [drm]
[  +0.000145]  drm_encoder_cleanup+0xa4/0x290 [drm]
[  +0.000144]  drm_mode_config_cleanup+0x118/0x740 [drm]
[  +0.000143]  drm_mode_config_init_release+0x1c/0x2c [drm]
[  +0.000144]  drm_managed_release+0x170/0x414 [drm]
[  +0.000142]  drm_dev_put.part.0+0xc0/0x124 [drm]
[  +0.000143]  drm_dev_put+0x20/0x30 [drm]
[  +0.000142]  meson_drv_unbind+0x1d8/0x2ac [meson_drm]
[  +0.000028]  take_down_aggregate_device+0xb0/0x160
[  +0.000016]  component_del+0x18c/0x360
[  +0.000009]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[  +0.000015]  platform_remove+0x64/0xb0
[  +0.000009]  device_remove+0xb8/0x154
[  +0.000009]  device_release_driver_internal+0x398/0x5b0
[  +0.000009]  driver_detach+0xac/0x1b0
[  +0.000009]  bus_remove_driver+0x158/0x29c
[  +0.000009]  driver_unregister+0x70/0xb0
[  +0.000008]  platform_driver_unregister+0x20/0x2c
[  +0.000008]  meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[  +0.000012]  __do_sys_delete_module+0x288/0x400
[  +0.000011]  __arm64_sys_delete_module+0x5c/0x80
[  +0.000009]  invoke_syscall+0x74/0x260
[  +0.000009]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000009]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000012]  el0t_64_sync_handler+0x11c/0x150
[  +0.000008]  el0t_64_sync+0x18c/0x190

[  +0.000018] Allocated by task 0:
[  +0.000007] (stack is not available)

[  +0.000011] Freed by task 2695:
[  +0.000008]  kasan_save_stack+0x2c/0x5c
[  +0.000011]  kasan_set_track+0x2c/0x40
[  +0.000008]  kasan_set_free_info+0x28/0x50
[  +0.000009]  ____kasan_slab_free+0x128/0x1d4
[  +0.000008]  __kasan_slab_free+0x18/0x24
[  +0.000007]  slab_free_freelist_hook+0x108/0x230
[  +0.000011]  kfree+0x110/0x35c
[  +0.000008]  release_nodes+0xf0/0x16c
[  +0.000009]  devres_release_group+0x180/0x270
[  +0.000008]  component_unbind+0x128/0x1e0
[  +0.000010]  component_unbind_all+0x1b8/0x264
[  +0.000009]  meson_drv_unbind+0x1a0/0x2ac [meson_drm]
[  +0.000025]  take_down_aggregate_device+0xb0/0x160
[  +0.000009]  component_del+0x18c/0x360
[  +0.000009]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[  +0.000012]  platform_remove+0x64/0xb0
[  +0.000008]  device_remove+0xb8/0x154
[  +0.000009]  device_release_driver_internal+0x398/0x5b0
[  +0.000009]  driver_detach+0xac/0x1b0
[  +0.000009]  bus_remove_driver+0x158/0x29c
[  +0.000008]  driver_unregister+0x70/0xb0
[  +0.000008]  platform_driver_unregister+0x20/0x2c
[  +0.000008]  meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[  +0.000011]  __do_sys_delete_module+0x288/0x400
[  +0.000010]  __arm64_sys_delete_module+0x5c/0x80
[  +0.000008]  invoke_syscall+0x74/0x260
[  +0.000008]  el0_svc_common.constprop.0+0xcc/0x260
[  +0.000008]  do_el0_svc+0x50/0x70
[  +0.000007]  el0_svc+0x68/0x1a0
[  +0.000009]  el0t_64_sync_handler+0x11c/0x150
[  +0.000009]  el0t_64_sync+0x18c/0x190

[  +0.000014] The buggy address belongs to the object at ffff000020c39000
               which belongs to the cache kmalloc-4k of size 4096
[  +0.000008] The buggy address is located 1504 bytes inside of
               4096-byte region [ffff000020c39000, ffff000020c3a000)

[  +0.000016] The buggy address belongs to the physical page:
[  +0.000009] page:fffffc0000830e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20c38
[  +0.000013] head:fffffc0000830e00 order:3 compound_mapcount:0 compound_pincount:0
[  +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[  +0.000019] raw: 0ffff00000010200 fffffc0000fd4808 fffffc0000126208 ffff000000002e80
[  +0.000009] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[  +0.000008] page dumped because: kasan: bad access detected

[  +0.000011] Memory state around the buggy address:
[  +0.000008]  ffff000020c39480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]  ffff000020c39500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] >ffff000020c39580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]                                                        ^
[  +0.000007]  ffff000020c39600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007]  ffff000020c39680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000006] ==================================================================

The reason this is happening is unloading meson-dw-hdmi will cause the
component API to take down the aggregate device, which in turn will cause
all devres-managed memory to be freed, including the struct dw_hdmi
allocated in dw_hdmi_probe. This struct embeds a struct drm_bridge that is
added at the end of the function, and which is later on picked up in
meson_encoder_hdmi_init.

However, when attaching the bridge to the encoder created in
meson_encoder_hdmi_init, it's linked to the encoder's bridge chain, from
where it never leaves, even after devres_release_group is called when the
driver's components are unbound and the embedding structure freed.

Then, when calling drm_dev_put in the aggregate driver's unbind function,
drm_bridge_detach is called for every single bridge linked to the encoder,
including the one whose memory had already been deallocated.

Fix by calling component_unbind_all after drm_dev_put.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-2-adrian.larumbe@collabora.com

drm/bridge: lt8912b: clarify lvds output status

Add comments on the lt8912_write_lvds_config() config to document the
current settings and to make it clear that this is a hardcoded
configuration not relevant for the HDMI output (could be removed without
affecting the HDMI port).

No changes on the actual register writes.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch

drm/amdgpu: Fix VRAM eviction issue

A user reported that when he starts a game (MTGA) with wine,
he observed an error msg failed to pin framebuffer with error -12.
Found an issue with the VRAM mem type eviction decision condition
logic. This patch will fix the if condition code error.

Gitlab bug link:
https://gitlab.freedesktop.org/drm/amd/-/issues/2159

Fixes: ded910f368a5 ("drm/amdgpu: Implement intersect/compatible functions")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922151447.265696-1-Arunpravin.PaneerSelvam@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl()

If the copy of the description string from userspace fails, then the page
for the instance descriptor doesn't get freed before returning -EFAULT,
which leads to a memleak.

Fixes: 7a7a933edd6c ("drm/vmwgfx: Introduce VMware mks-guest-stats")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916204751.720716-1-rafaelmendsr@gmail.com

drm: bridge/dw-hdmi-ahb-audio: use strscpy() is more robust and safer

The implementation of strscpy() is more robust and safer.

That's now the recommended way to copy NUL terminated strings.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919030401.211331-1-chi.minghao@zte.com.cn

drm/ast: Fix video broken in some resolutions on ast2600

Some cases are not handled well for ast2600.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916091706.4559-1-jammy_huang@aspeedtech.com

drm/ast: Add resolution support for 1152x864@75

Add 1152x864 into support list.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916085058.3386-1-jammy_huang@aspeedtech.com

drm/plane-helper: Provide DRM_PLANE_NON_ATOMIC_FUNCS initializer macro

Provide DRM_PLANE_NON_ATOMIC_FUNCS, which initializes plane functions
of non-atomic drivers to default values. The macro is not supposed to
be used in new code, but helps with documenting and finding existing
users.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-5-tzimmermann@suse.de