hw/riscv/sifive_e: Fix inheritance of SiFiveEState

SiFiveEState inherits from SysBusDevice while it's TypeInfo claims it to
inherit from TYPE_MACHINE. This is an inconsistency which can cause
undefined behavior such as memory corruption.

Change SiFiveEState to inherit from MachineState since it is registered
as a machine.

Fixes: 0869490b1c ("riscv: sifive_e: Manually define the machine")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220922075232.33653-1-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Check the correct exception cause in vector GDB stub

After RISCVException enum is introduced, riscv_csrrw_debug() returns
RISCV_EXCP_NONE to indicate there's no error. RISC-V vector GDB stub
should check the result against RISCV_EXCP_NONE instead of value 0.
Otherwise, 'E14' packet would be incorrectly reported for vector CSRs
when using "info reg vector" GDB command.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20220918083245.13028-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: opentitan: Expose the resetvec as a SoC property

On the OpenTitan hardware the resetvec is fixed at the start of ROM. In
QEMU we don't run the ROM code and instead just jump to the next stage.
This means we need to be a little more flexible about what the resetvec
is.

This patch allows us to set the resetvec from the command line with
something like this:
    -global driver=riscv.lowrisc.ibex.soc,property=resetvec,value=0x20000400

This way as the next stage changes we can update the resetvec.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220914101108.82571-4-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: opentitan: Fixup resetvec

The resetvec for the OpenTitan machine ended up being set to an out of
date value, so let's fix that and bump it to the correct start address
(after the boot ROM)

Fixes: bf8803c64d75 "hw/riscv: opentitan: bump opentitan version"
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220914101108.82571-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Set the CPU resetvec directly

Instead of using our properties to set a config value which then might
be used to set the resetvec (depending on your timing), let's instead
just set the resetvec directly in the env struct.

This allows us to set the reset vec from the command line with:
    -global driver=riscv.hart_array,property=resetvec,value=0x20000400

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220914101108.82571-2-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: remove fixed numbering from GDB xml feature files

The fixed register numbering in the various GDB feature files for
RISC-V only exists because these files were originally copied from the
GDB source tree.

However, the fixed numbering only exists in the GDB source tree so
that GDB, when it connects to a target that doesn't provide a target
description, will use a specific numbering scheme.

That numbering scheme is designed to be compatible with the first
versions of QEMU (for RISC-V), that didn't send a target description,
and relied on a fixed numbering scheme.

Because of the way that QEMU manages its target descriptions,
recording the number of registers in each feature, and just relying on
GDB's numbering starting from 0, then I propose that we remove all the
fixed numbering from the RISC-V feature xml files, and just rely on
the standard numbering scheme.  Plenty of other targets manage their
xml files this way, e.g. ARM, AArch64, Loongarch, m68k, rx, and s390.

Signed-off-by: Andrew Burgess <aburgess@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Message-Id: <6069395f90e6fc24dac92197be815fedf42f5974.1661934573.git.aburgess@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: remove fflags, frm, and fcsr from riscv-*-fpu.xml

While testing some changes to GDB's handling for the RISC-V registers
fcsr, fflags, and frm, I spotted that QEMU includes these registers
twice in the target description it sends to GDB, once in the fpu
feature, and once in the csr feature.

Right now things basically work OK, QEMU maps these registers onto two
different register numbers, e.g. fcsr maps to both 68 and 73, and GDB
can use either of these to access the register.

However, GDB's target descriptions don't really work this way, each
register should appear just once in a target description, mapping the
register name onto the number GDB should use when accessing the
register on the target.  Duplicate register names actually result in
duplicate registers on the GDB side, however, as the registers have
the same name, the user can only access one of these registers.

Currently GDB has a hack in place, specifically for RISC-V, to spot
the duplicate copies of these three registers, and hide them from the
user, ensuring the user only ever sees a single copy of each.

In this commit I propose fixing this issue on the QEMU side, and in
the process, simplify the fpu register handling a little.

I think we should, remove fflags, frm, and fcsr from the two (32-bit
and 64-bit) fpu feature xml files.  These files will only contain the
32 core floating point register f0 to f31.  The fflags, frm, and fcsr
registers will continue to be advertised in the csr feature as they
currently are.

With that change made, I will simplify riscv_gdb_get_fpu and
riscv_gdb_set_fpu, removing the extra handling for the 3 status
registers.

Signed-off-by: Andrew Burgess <aburgess@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <0fbf2a5b12e3210ff3867d5cf7022b3f3462c9c8.1661934573.git.aburgess@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: fix csr check for cycle{h}, instret{h}, time{h}, hpmcounter3-31{h}

- modify check for mcounteren to work in all less-privilege mode
- modify check for scounteren to work only when S mode is enabled
- distinguish the exception type raised by check for scounteren between U
and VU mode

Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220817083756.12471-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Remove sideleg and sedeleg

sideleg and sedeleg csrs are not part of riscv isa spec
anymore, these csrs were part of N extension which
is removed from the riscv isa specification.

These commits removed all traces of these csrs from
riscv spec (https://github.com/riscv/riscv-isa-manual) -

commit f8d27f805b65 ("Remove or downgrade more references to N extension (#674)")
commit b6cade07034d ("Remove N extension chapter for now")

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220824145255.400040-1-rpathak@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

docs/system: clean up code escape for riscv virt platform

The example code is rendered slightly mangled due to missing code
block. Properly escape the code block and add shell prompt and qemu to
fit in with the other examples on the page.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220905163939.1599368-1-alex.bennee@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/ssi: ibex_spi: update reg addr

Updates the `EVENT_ENABLE` register to offset `0x34` as per
OpenTitan spec [1].

[1] https://docs.opentitan.org/hw/ip/spi_host/doc/#Reg_event_enable

Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220823061201.132342-5-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/ssi: ibex_spi: fixup typos in ibex_spi_host

This patch fixes up minor typos in ibex_spi_host

Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220823061201.132342-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge tag 'pull-target-arm-20220922' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * hw/net/can: fix Xilinx ZynqMP CAN RX FIFO logic
 * Fix alignment for Neon VLD4.32
 * Refactoring of page-table-walk code
 * hw/acpi: Add ospm_status hook implementation for acpi-ged
 * hw/net/lan9118: Signal TSFL_INT flag when TX FIFO reaches specified level
 * chardev/baum: avoid variable-length arrays
 * io/channel-websock: avoid variable-length arrays
 * hw/net/e1000e_core: Use definition to avoid dynamic stack allocation
 * hw/ppc/pnv: Avoid dynamic stack allocation
 * hw/intc/xics: Avoid dynamic stack allocation
 * hw/i386/multiboot: Avoid dynamic stack allocation
 * hw/usb/hcd-ohci: Use definition to avoid dynamic stack allocation
 * ui/curses: Avoid dynamic stack allocation
 * tests/unit/test-vmstate: Avoid dynamic stack allocation
 * configure: fix various shellcheck-spotted issues and nits

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmMsjocZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3s0vEACuUs7nGGX5vd96EPN+sO5s
# HstP16G6/Xnlw2z0BaXi0MMWapQRhSQJ+MIeDJmqIyZKQ3geJGP7pbFTxI3zreYM
# UTKjdI/wWRYMKPYfxlIBZ8TPugj4a4paFJlyqmpHXtkwiWRv6rF70HQ9Yku5id93
# FN9js/dyF74S2AaDppBuTWp31cM1k6kBTg/v5tXSxE8kDUKkO+HZ1VujOqIG/4nJ
# 6urNJ7jlHSiFdXya2QiR+CAkyXyy551rLETeO8VJg9tOO7Ys7Olj7lqv6kHJY/X1
# 01RbN5A5WXhqCvTLM3UYTvFHmbZtS/C5iUhHRtlZkOoeSv2jS6IRDB8BrBtIbOwF
# XKpaYf1jyFLFwX++hpvySD9Vbcu8KgKId8iKTuDcxjQlEjL3fTbt1ulKo4y+rJ8O
# 6G1k4yZc8/nAvttNoKCn7/Jr1dC+HsANa+1s1L+6w+f1gARV0VXs4gqsveNnbe1+
# WzzaHvHt+hCaiWkSZlyisyw3fbEXMrEyKewi+SZu3c8PvJ6DHa+rYjkhem7muBVF
# iR48FRTjFiS+o402KMwXfMdiGjXyZFi09yn5diowlVjkNAaZVZfgu/wUMD5QBhbh
# fNDSw7LpXGUHML/O98MiXznkgGvTEQNxZdp2qIQrTiinUgmV4ZRLR23ZpEibdJPX
# kiOkr46SbWvksCXnRlTf8w==
# =hec8
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 22 Sep 2022 12:34:15 EDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20220922' of https://git.linaro.org/people/pmaydell/qemu-arm: (39 commits)
  configure: Avoid use of 'local' as it is non-POSIX
  configure: Check mkdir result directly, not via $?
  configure: Remove use of backtick `...` syntax
  configure: Add './' on front of glob of */config-devices.mak.d
  configure: Add missing quoting for some easy cases
  configure: Remove unused meson_args variable
  configure: Remove unused python_version variable
  tests/unit/test-vmstate: Avoid dynamic stack allocation
  ui/curses: Avoid dynamic stack allocation
  hw/usb/hcd-ohci: Use definition to avoid dynamic stack allocation
  hw/i386/multiboot: Avoid dynamic stack allocation
  hw/intc/xics: Avoid dynamic stack allocation
  hw/ppc/pnv: Avoid dynamic stack allocation
  hw/net/e1000e_core: Use definition to avoid dynamic stack allocation
  io/channel-websock: Replace strlen(const_str) by sizeof(const_str) - 1
  chardev/baum: Avoid dynamic stack allocation
  chardev/baum: Use definitions to avoid dynamic stack allocation
  chardev/baum: Replace magic values by X_MAX / Y_MAX definitions
  hw/net/lan9118: Signal TSFL_INT flag when TX FIFO reaches specified level
  hw/acpi: Add ospm_status hook implementation for acpi-ged
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'edgar/xilinx-next-2022-09-21.for-upstream' of https://github.com/edgarigl/qemu into staging

Xilinx queue

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEErET+3BT38evtv0FRKcWWeA9ryoMFAmMraeQACgkQKcWWeA9r
# yoOUUwgAz/GPBURkdzYcFbOa4VEBrCaJxCu2WvyBdj6kjEgw/ZmdXbDHfeKTr2Rl
# 8mo7UWugfj1KTMqo5Tmte6+3EeNcuB9qA/flKj7wfKwLX1S0V6EFNGJn8sdNe+1r
# c6fYm0bUBk9FKauUT4t3U1Zl9SGJ2Pwa8JvztVgBvvZG6G+J0bkVmw2mMXb3jaaV
# skzmBuvDT0G8JkxWnpEXwznrPSHSjivqawVlBfjC5JmCjZ16bz05okju+cckfzTJ
# 0VF7/27MWfVCpMtWjRSA6p+3gwLziz7xOhPe9excSVsDyAs4WdcuI+/42/MBBUIn
# rlg7pNIslI9r8eP5Jyk6LcSmBsPDMA==
# =GZsl
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 21 Sep 2022 15:45:40 EDT
# gpg:                using RSA key AC44FEDC14F7F1EBEDBF415129C596780F6BCA83
# gpg: Good signature from "Edgar E. Iglesias (Xilinx key) <edgar.iglesias@xilinx.com>" [unknown]
# gpg:                 aka "Edgar E. Iglesias <edgar.iglesias@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AC44 FEDC 14F7 F1EB EDBF  4151 29C5 9678 0F6B CA83

* tag 'edgar/xilinx-next-2022-09-21.for-upstream' of https://github.com/edgarigl/qemu:
  hw/microblaze: pass random seed to fdt

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-hex-20220919' of https://github.com/quic/qemu into staging

Hexagon update
    remove unused encodings
    add fmin/fmax tests for signed zero

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmMou7IACgkQewJE+xLe
# RCIYbQgAgjFujecgbbCJfBPVMmpTXNOgk+Jt3w+jfg7/WJRZuhxAU3xB2qpismUH
# 5MntMlFHAGOjlPXfg6U5AZFSw3RhlanH/RChHpVKuL6peOXFImIfEqdyVXHXfCuu
# FlpQFGwJ3Rs50UJhd7lVdlx0I7lup4E4X77hFvFcZQP6aNrt6Ic1Zq5eXhEq9k2A
# NnXol1R416JRT/senujYVvcTpgYVHlQCS+4dJEzKUqvFlTdo7lnAbPdjO8MPrz7B
# 0NgPUGjGZJ70Dcqvd1n8HePIU1YyKTlHJNaWyTlAmw4MECyHyAJnd64jEMNECDb5
# 0BrpHcY1HCt1Rh4QratemTfJglAJlA==
# =UUyr
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 19 Sep 2022 14:57:54 EDT
# gpg:                using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5  9AB4 7B02 44FB 12DE 4422

* tag 'pull-hex-20220919' of https://github.com/quic/qemu:
  Hexagon (tests/tcg/hexagon): add fmin/fmax tests for signed zero
  Hexagon (target/hexagon) remove unused encodings

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

configure: Avoid use of 'local' as it is non-POSIX

We use the non-POSIX 'local' keyword in just two places in configure;
rewrite to avoid it.

In do_compiler(), just drop the 'local' keyword.  The variable
'compiler' is only used elsewhere in the do_compiler_werror()
function, which already uses the variable as a normal non-local one.

In probe_target_compiler(), $try and $t are both local; make them
normal variables and use a more obviously distinct variable name
for $t.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-8-peter.maydell@linaro.org

configure: Check mkdir result directly, not via $?

Shellcheck warns that we have one place where we run a command and
then check if it failed using $?; this is better written to simply
check the command in the 'if' statement directly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-7-peter.maydell@linaro.org

configure: Remove use of backtick `...` syntax

There's only one place in configure where we use `...` to execute a
command and capture the result.  Switch to $() to match the rest of
the script. This silences a shellcheck warning.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-6-peter.maydell@linaro.org

configure: Add './' on front of glob of */config-devices.mak.d

Shellcheck warns that in
 rm -f */config-devices.mak.d
the glob might expand to something with a '-' in it, which would
then be misinterpreted as an option to rm. Fix this by adding './'.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-5-peter.maydell@linaro.org

configure: Add missing quoting for some easy cases

This commit adds quotes in some places which:
 * are spotted by shellcheck
 * are obviously incorrect
 * are easy to fix just by adding the quotes

It doesn't attempt fix all of the places shellcheck finds errors,
or even all the ones which are easy to fix. It's just a random
sampling which is hopefully easy to review and which cuts
down the size of the problem for next time somebody wants to
try to look at shellcheck errors.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-4-peter.maydell@linaro.org

configure: Remove unused meson_args variable

The meson_args variable was added in commit 3b4da13293482134b, but
was not used in that commit and isn't used today.  Delete the
unnecessary assignment.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-3-peter.maydell@linaro.org

configure: Remove unused python_version variable

Shellcheck correctly reports that we set python_version and never use
it.  This is a leftover from commit f9332757898a7: we used to use
python_version purely to as part of the summary information printed
at the end of a configure run, and that commit changed to printing
the information from meson (which looks up the python version
itself). Remove the unused variable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-2-peter.maydell@linaro.org

tests/unit/test-vmstate: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length
array on the stack.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-12-peter.maydell@linaro.org

ui/curses: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length
array on the stack.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-11-peter.maydell@linaro.org

hw/usb/hcd-ohci: Use definition to avoid dynamic stack allocation

The compiler isn't clever enough to figure 'width' is a constant,
so help it by using a definitions instead.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-10-peter.maydell@linaro.org

hw/i386/multiboot: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length array on
the stack. Replace the snprintf() call by g_strdup_printf().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-9-peter.maydell@linaro.org

hw/intc/xics: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length
array on the stack.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-8-peter.maydell@linaro.org

hw/ppc/pnv: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length
array on the stack.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20220819153931.3147384-7-peter.maydell@linaro.org

hw/net/e1000e_core: Use definition to avoid dynamic stack allocation

The compiler isn't clever enough to figure 'min_buf_size'
is a constant, so help it by using a definitions instead.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-6-peter.maydell@linaro.org

io/channel-websock: Replace strlen(const_str) by sizeof(const_str) - 1

The combined_key[... QIO_CHANNEL_WEBSOCK_GUID_LEN ...] array in
qio_channel_websock_handshake_send_res_ok() expands to a call
to strlen(QIO_CHANNEL_WEBSOCK_GUID), and the compiler doesn't
realize the string is const, so consider combined_key[] being
a variable-length array.

To remove the variable-length array, we provide it a hint to
the compiler by using sizeof() - 1 instead of strlen().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-5-peter.maydell@linaro.org

chardev/baum: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length
array on the stack.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-4-peter.maydell@linaro.org

chardev/baum: Use definitions to avoid dynamic stack allocation

We know 'x * y' will be at most 'X_MAX * Y_MAX' (which is not
a big value, it is actually 84). Instead of having the compiler
use variable-length array, declare an array able to hold the
maximum 'x * y'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-3-peter.maydell@linaro.org

chardev/baum: Replace magic values by X_MAX / Y_MAX definitions

Replace '84' magic value by the X_MAX definition, and '1' by Y_MAX.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-2-peter.maydell@linaro.org

hw/net/lan9118: Signal TSFL_INT flag when TX FIFO reaches specified level

The LAN9118 allows the guest to specify a level for both the TX and
RX FIFOs at which an interrupt will be generated.  We implement the
RSFL_INT interrupt for the RX FIFO but are missing the handling of
the equivalent TSFL_INT for the TX FIFO.  Add the missing test to set
the interrupt if the TX FIFO has exceeded the guest-specified level.

This flag is required for Micrium lan911x ethernet driver to work.

Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
[PMM: Tweaked commit message and comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/acpi: Add ospm_status hook implementation for acpi-ged

Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status"
causes segmentation fault with following dumpstack:
 #1  0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312
 #2  0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63
 #3  0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128
 #4  0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150
 #5  aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178
 #6  0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421
 #7  0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320
 #8  0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0
 #9  0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297
 #10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320
 #11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596
 #12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734
 #13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38
 #14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47

Fixes: ebb62075021a ("hw/acpi: Add ACPI Generic Event Device Support")
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220816094957.31700-1-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to get_phys_addr_pmsav5

Remove the use of regime_is_secure from get_phys_addr_pmsav5.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add secure parameter to get_phys_addr_pmsav7

Remove the use of regime_is_secure from get_phys_addr_pmsav7,
using the new parameter instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-19-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to pmsav7_use_background_region

Remove the use of regime_is_secure from pmsav7_use_background_region,
using the new parameter instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add secure parameter to get_phys_addr_pmsav8

Remove the use of regime_is_secure from get_phys_addr_pmsav8.
Since we already had a local variable named secure, use that.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to get_phys_addr_v6

Remove the use of regime_is_secure from get_phys_addr_v6,
passing the new parameter to the lookup instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to get_phys_addr_v5

Remove the use of regime_is_secure from get_phys_addr_v5,
passing the new parameter to the lookup instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Folded in definition of local is_secure in get_phys_addr(),
 since I dropped the earlier patch that would have provided it]
Message-id: 20220822152741.1617527-14-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add secure parameter to pmsav8_mpu_lookup

Remove the use of regime_is_secure from pmsav8_mpu_lookup,
passing the new parameter to the lookup instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to v8m_security_lookup

Remove the use of regime_is_secure from v8m_security_lookup,
passing the new parameter to the lookup instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Remove is_subpage argument to pmsav8_mpu_lookup

This can be made redundant with result->page_size, by moving the basic
set of page_size from get_phys_addr_pmsav8.  We still need to overwrite
page_size when v8m_security_lookup signals a subpage.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-11-richard.henderson@linaro.org
[PMM: Update a comment that used to refer to is_subpage]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in pmsav8_mpu_lookup

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav8

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav7

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav5

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_v5

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_v6

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_lpae

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Create GetPhysAddrResult

Combine 5 output pointer arguments from get_phys_addr
into a single struct.  Adjust all callers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix alignment for VLD4.32

When requested, the alignment for VLD4.32 is 8 and not 16.

See ARM documentation about VLD4 encoding:
    ebytes = 1 << UInt(size);
    if size == '10' then
        alignment = if a == '0' then 1 else 8;
    else
        alignment = if a == '0' then 1 else 4*ebytes;

Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220914105058.2787404-1-chigot@adacore.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/net/can: fix Xilinx ZynqMP CAN RX FIFO logic

For consistency, function "update_rx_fifo()" should use the RX FIFO
register field names, not the TX FIFO ones, even if they refer to the
same bit positions in the register.

Signed-off-by: Anton Kochkov <anton.kochkov@proton.me>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220817141754.2105981-1-anton.kochkov@proton.me
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1123
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/microblaze: pass random seed to fdt

If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This FDT node is part of the DT specification.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>

Merge tag 'm68k-for-7.2-pull-request' of https://github.com/vivier/qemu-m68k into staging

m68k pull request 20220921

- several fixes for SR
- implement TAS
- feature cleanup

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmMrMx0SHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748UB0P/1w5w+ogpcWVp9uBPE9m6lTT8sTricWD
# oGMIEG0kgpS3xTp7pZ/WeCp38IShFBfBcz5aypvR5nS/1aclyJnzGsCqyWdBe9c4
# jJJY5r7JKP2aKcolGNilNyd20ldOiaxZGe6yFLJDWi2spFbRx3iiRJ4/2NXF5Xi8
# TlHKdlDGlNLFiFNtBXMMwqvL77qJ8LH/aE4cAr8JTOb1VszKXrFxqEqxoUucRirB
# u0LbM+DP3u2xXjTGLMLlMcKf9X2BXwuWBSAXslB8xWmRlX+B6fMudBFglTgbu0Cc
# bpoBBqY4s3QYPb21i89osYevJAJSdrtEzkKus3xAI08ACSffb9k9m/naVJJDSSNC
# HZeKVbAd7I0Xw2xzzO5yQB+7rdfgoL1miE1rs936WKHi0WWHZpdJqzl/3G3ZPhRz
# NmqczF9rRR9B9SabXx5lWlhK+Ys/W7PzY+R4gc6ose0wF4T70qmVF3EoioP1c5Y8
# 6OonMpRu6L5sW5KM3IUmkBo3KcnLezlxtebfaDyaKC9tB0qg4aM14ikL36nsLFbh
# 2nGExYSyMJ6U4tqpxyQxijMMSQG20vyVIup6cUsrSD+rGmbSuWZWJwsTmaAw2W6k
# 6HtDgtFk40ZB1WttYupQBa/LgjshGLl28jyLI9nNEdFYb4H1JAallEERF/tb6AUD
# WEiu8vcUMYEp
# =IAMt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 21 Sep 2022 11:51:57 EDT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* tag 'm68k-for-7.2-pull-request' of https://github.com/vivier/qemu-m68k:
  target/m68k: always call gen_exit_tb() after writes to SR
  target/m68k: rename M68K_FEATURE_M68000 to M68K_FEATURE_M68K
  target/m68k: Perform writback before modifying SR
  target/m68k: Fix MACSR to CCR
  target/m68k: Implement atomic test-and-set

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu into staging

ppc patch queue for 2022-09-20:

This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
# ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
# a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
# =qT+H
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 15:37:56 EDT
# gpg:                using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28  3819 3CD9 CA96 DE03 3164

* tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu:
  hw/ppc/spapr: Fix code style problems reported by checkpatch
  hw/pci-host: pnv_phb{3, 4}: Fix heap out-of-bound access failure
  hw/ppc: spapr: Use qemu_vfree() to free spapr->htab
  target/ppc: Clear fpstatus flags on helpers missing it
  target/ppc: Zero second doubleword of VSR registers for FPR insns
  target/ppc: Set OV32 when OV is set
  target/ppc: Zero second doubleword for VSX madd instructions
  target/ppc: Set result to QNaN for DENBCD when VXCVI occurs
  target/ppc: Zero second doubleword in DFP instructions
  target/ppc: Remove unused xer_* macros
  target/ppc: Remove extra space from s128 field in ppc_vsr_t
  target/ppc: Merge fsqrt and fsqrts helpers
  target/ppc: Move fsqrts to decodetree
  target/ppc: Move fsqrt to decodetree
  target/ppc: Implement hashstp and hashchkp
  target/ppc: Implement hashst and hashchk
  target/ppc: Add HASHKEYR and HASHPKEYR SPRs

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-testing-next-200922-2' of https://github.com/stsquad/qemu into staging

Testing and CI changes:

  - reduce number of targets for cross_user_build
  - update avocado xlnx_versal test with new binaries
  - add explicit timeouts to a number of avocado TCG tests
  - reduce default timeout to 120s
  - update lcitool to support cross-amd64
  - flatten a number of docker cross containers
  - clean up stale qemu/debian10 dependencies
  - remove obsolete Fedora VM test
  - add configure workaround for meson --disable-pie bug
  - disable --static-pie for aarch64 gitlab runner
  - update aarch32/aarch64 jobs to 22.04
  - deprecate 32 bit big-endian MIPS as a host
  - remove FROM qemu/ support from docker.py
  - remove Debian base images now everything is flat

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmMp8Q8ACgkQ+9DbCVqe
# KkQmlwf/awT+jOmAW7TjlQnUTgHJ2hyOo7EViY/nmRkPOCT3ZG32pWFHBorHPX7s
# BeqZzpzCvhzaIfObnjIssx13C5QId5XjJGuTgMAnSsGhzTrp7VUJc1/bBfHcD9L2
# dJJduG+bfAkh95heBkry5EhFt2ZMui5yv9DjEH44hUUc9nwKtIQGts3H3fnVqzvv
# rzLZ7c2lhdLpAxHjmjSiiD8H59lJ+DpoziaobW4D7teGgecnyGVvJ9m1YH4Rc+kM
# gpLTOGMhADkQlysf5e5cvxXSJbP7YpXYrsr9X+DfEy5PMt2L3y4Yv0wiAz9ClYvm
# obD4wMQS5echYvb77qS1G8A0VMEPqA==
# =3oYu
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 12:57:51 EDT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* tag 'pull-testing-next-200922-2' of https://github.com/stsquad/qemu: (30 commits)
  tests/docker: remove the Debian base images
  tests/docker: remove FROM qemu/ support from docker.py
  tests/docker: update and flatten debian-toolchain
  tests/docker: update and flatten debian-hexagon-cross
  tests/docker: update and flatten debian-loongarch-cross
  tests/docker: update and flatten debian-amd64-cross
  tests/lcitool: bump to latest version
  tests/docker: update and flatten debian-all-test-cross
  tests/docker: flatten debian-riscv64-test-cross
  Deprecate 32 bit big-endian MIPS
  gitlab-ci: update aarch32/aarch64 custom runner jobs
  gitlab-ci/custom-runners: Disable -static-pie for ubuntu-20.04-aarch64
  configure: explicitly set cflags for --disable-pie
  tests/vm: Remove obsolete Fedora VM test
  tests/docker: remove amd64 qemu/debian10 dependency
  tests/docker: remove tricore qemu/debian10 dependency
  tests/docker: flatten debian-powerpc-test-cross
  tests/docker: update and flatten debian-sparc64-cross
  tests/docker: update and flatten debian-sh4-cross
  tests/docker: update and flatten debian-mips64-cross
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

target/m68k: always call gen_exit_tb() after writes to SR

Any write to SR can change the security state so always call gen_exit_tb() when
this occurs. In particular MacOS makes use of andiw/oriw in a few places to
handle the switch between user and supervisor mode.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220917112515.83905-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: rename M68K_FEATURE_M68000 to M68K_FEATURE_M68K

The M68K_FEATURE_M68000 feature is misleading in that its name suggests the feature
is defined just for Motorola 68000 CPUs, whilst in fact it is defined for all
Motorola 680X0 CPUs.

In order to avoid confusion with the other M68K_FEATURE_M680X0 constants which
define the features available for specific Motorola CPU models, rename
M68K_FEATURE_M68000 to M68K_FEATURE_M68K and add comments to clarify its usage.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220917112515.83905-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Perform writback before modifying SR

Writes to SR may change security state, which may involve
a swap of %ssp with %usp as reflected in %a7.  Finish the
writeback of %sp@+ before swapping stack pointers.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1206
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220913142818.7802-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Fix MACSR to CCR

First, we were writing to the entire SR register, instead
of only the flags portion.  Second, we were not clearing C
as per the documentation (X was cleared via the 0xf mask).

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220913142818.7802-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Implement atomic test-and-set

This is slightly more complicated than cas,
because tas is allowed on data registers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829051746.227094-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge tag 'pull-request-2022-09-20' of https://gitlab.com/thuth/qemu into staging

* Skip tests if the corresponding feature is missing
* Update NetBSD VM test to version 9.3
* Update the FreeBSD CI to version 13.1
* Some small fixes for the qtests
* Update wordings in the QEMU guest-agent

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmMpvqURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXtaQ//ap4P8Gdg7HyShflpHj3+Z+UC/THtcCAD
# F5Oj/E89wYJZJvWpjELLUf+218O+zbcKkv6z25AHo37JRSLQMzsD21RpDYcu8qnN
# Xk77KrOLFaVRRo6e3FAi5I+uWsm1h/9jJfC/sFrzfKGnWcW5pTzXUkbvWT3LZo/q
# d0wJCMn/+h0j6kqhjm8mhFCsGsSaUKFCMzm/6rsWxVsMsVnlTyYhg/IzhocKrkVD
# 9ZWz+jAv+h4F0CLl/SeRvZFq4LEGZoP3KHWrDAgEO9i1yC+tNpGDFyV/hJXwapcm
# jYGaPPgS2dLToMXf5uubfmyptircQKqdpC2Hl8UwgUS6OgwA2YRCxad8rrrdBezq
# 2Nb8KissVB8ySL1Asf00gxioJNwLKrY+4NIeDVxAQ56f1/9kd0w0ylrweR492V/p
# z3Yrs3uqqALR1jWfB7/Rh4EN2R0oe6bnlfb8bB6lzPKynXQicZLeoOnNPbkOQMw8
# HgjKVFT130ydXJKMJkgEQmi4JUGoaKqSKCmlSaHz9TAobwNiVBXaH0cyuX5QEuoX
# WgZosiF5nBzdbhkC2IPcQYHzIIkelfx9j9mKE0PNfUSkFgMiywcI5TfqabPWGeaA
# rxYPU4EZmbgCZPlBVdPFwog/BXap2EIo9+xtINM0COQDoy+Q/l5Z3keHhpjayBBS
# qWc6CRSmhLs=
# =sHK+
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 09:22:45 EDT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2022-09-20' of https://gitlab.com/thuth/qemu:
  qga: Replace 'blacklist' and 'whitelist' in the guest agent sources
  qga: Replace 'blacklist' command line and config file options by 'block-rpcs'
  gitlab-ci: Update the FreeBSD 13 job from 13.0 to 13.1
  tests: sb16 has both pc and q35 tests
  tests: Only run intel-hda-tests if machine type is compiled in
  bios-tables-test: Only run test for machine types compiled in
  bios-tables-test: Sort all x86_64 tests by machine type
  bios-tables-test: Make oem-fields tests be consistent
  meson-build: Enable CONFIG_REPLICATION only when replication is set
  tests: Fix error strings
  qtest/fuzz-lsi53c895a-test: set guest RAM to 2G
  tests/qtest: npcm7xx-emc-test: Skip checking MAC
  .gitlab-ci.d/windows.yml: Drop the sed processing in the 64-bit build
  tests/vm: update NetBSD to 9.3
  tests: mark io-command test as skipped if socat is missing

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* add help option for -audio and -audiodev
* another missing memory barrier for dirty pages
* target/i386: Raise #GP on unaligned m128 accesses
* coverity fixes + improvements to components
* add MMX and 3DNow! tests
* SSE4a fixes
* target/i386: TCG translation cleanups
* update qboot submodule

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmMocZcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNV7Qf+NEoB8R0ug+ClMRe1Qqt8FXEd0eXE
# nT19q4rOWfmW4/L+wI6gpxhbxrxOuLwoZ8YvD8c6rQAdexMoHoeTvA1PAca4zZTo
# ISmW3bXsoHN2uGLPz4CKhjKBLCANtDkh3EWCwRFkLSRCLSRDhKPrG1Ue3fOgQ6GO
# riROcxbyYzvU/4uefSW+xG/Im9gftNF6occZZ59LrK7Xd8kwlb+E+EdsmzFw5f8O
# Q9irVQ8pX9ZM4BK2KiT16nZ0uSRwJqSJKbLI670nUEsj1jQCIgU3srgZHjAIvoir
# yivDs6oktgS/HkPD5CQoTX+fVDgEDM1TTF6P8r7uJopPXpzz+AHswfSJmg==
# =RVCS
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 19 Sep 2022 09:41:43 EDT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
  qboot: update to latest submodule
  build: remove extra parentheses causing missing rebuilds
  target/i386: introduce insn_get_addr
  target/i386: REPZ and REPNZ are mutually exclusive
  target/i386: fix INSERTQ implementation
  target/i386: correctly mask SSE4a bit indices in register operands
  audio: add help option for -audio and -audiodev
  tests/tcg: remove old SSE tests
  tests/tcg: refine MMX support in SSE tests
  tests/tcg: i386: add MMX and 3DNow! tests
  tests/tcg: i386: fix typos in 3DNow! instructions
  tests: unit: add NULL-pointer check
  tests: test-qga: close socket on failure to connect
  tests: unit: simplify test-visitor-serialization list tests
  smbios: sanitize type from external type before checking have_fields_bitmap
  coverity: put NUBus under m68k component
  coverity: add new RISC-V component
  spapr_pci: fix leak in spapr_phb_vfio_get_loc_code
  kvm: fix memory leak on failure to read stats descriptors
  target/i386: Raise #GP on unaligned m128 accesses when required.
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-loongarch-20220920' of https://gitlab.com/gaosong/qemu into staging

v2: fix compile error.

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCYymK3wAKCRBAov/yOSY+
# 31trA/oDy6CHaPvT9mwKOM/ScYcwCf+dEtFGkqpsjcPlEB7GLJ9moJxp1xlm+Htw
# KA0MlA4QrI6MWd9udEbnoB7aRScG/ugzWHDPGocg+qjqiZvmHpE9ShdxYeDVJaLk
# 6hN9dkom+ANWeZ7T4gmdQreK/lwjUAqkiPSjw1HhvSHr3kAeDA==
# =uUxe
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 05:41:51 EDT
# gpg:                using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Can't check signature: No public key

* tag 'pull-loongarch-20220920' of https://gitlab.com/gaosong/qemu:
  hw/loongarch: Improve acpi dsdt table
  hw/loongarch: Support memory hotplug
  hw/loongarch: Fix acpi ged irq number in dsdt table
  hw/loongarch: Add RAMFB to dynamic_sysbus_devices list
  hw/loongarch: Add hotplug handler for machine
  hw/loongarch: Add platform bus support
  hw/loongarch: Add interrupt information to FDT table
  hw/loongarch: Support fw_cfg dma function
  hw/loongarch: Remove vga device when loongarch init

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

tests/docker: remove the Debian base images

We no longer use these in any of our images. Clean-up the remaining
comments and documentation that reference them and remove from the
build.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-31-alex.bennee@linaro.org>

tests/docker: remove FROM qemu/ support from docker.py

We want to migrate from docker.py to building our images directly with
docker/podman. Before we get there we need to make sure we don't
re-introduce our layered builds so bug out if we see FROM qemu/ in a
Dockerfile.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-30-alex.bennee@linaro.org>

tests/docker: update and flatten debian-toolchain

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile as we do not need anything from the base image to
build the toolchain. This is used to build both the nios and
microblaze toolchains.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-29-alex.bennee@linaro.org>

tests/docker: update and flatten debian-hexagon-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile as we do not some of the extraneous packages from
the base image to build the toolchain.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-28-alex.bennee@linaro.org>

tests/docker: update and flatten debian-loongarch-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from the
QEMU base image just to compile test images. In this case it is a
binary distribution of the toolchain anyway.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-27-alex.bennee@linaro.org>

tests/docker: update and flatten debian-amd64-cross

Now lcitool has support for building a x86_64 cross image we can use
it for this.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-26-alex.bennee@linaro.org>

tests/lcitool: bump to latest version

We need this to be able to cleanly build the x86 cross images. There
are a few minor updates triggered by lcitool-refresh including adding
"libslirp" to the freebsd vars and opensuse-leap which will help when
we finally drop the slirp submodule from QEMU.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-25-alex.bennee@linaro.org>

tests/docker: update and flatten debian-all-test-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We also need to ensure we install clang as it is
used for those builds as well.

It would be nice to port this to lcitool but for now this will do.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-24-alex.bennee@linaro.org>

tests/docker: flatten debian-riscv64-test-cross

Flatten into a single dockerfile and update to match the rest of the
test cross compile dockerfiles.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-23-alex.bennee@linaro.org>

Deprecate 32 bit big-endian MIPS

It's becoming harder to maintain a cross-compiler to test this host
architecture as the old stable Debian 10 ("Buster") moved into LTS
which supports fewer architectures. For now:

  - mark it's deprecation in the docs
  - downgrade the containers to build TCG tests only
  - drop the cross builds from our CI

Users with an appropriate toolchain and user-space can still take
their chances building it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-22-alex.bennee@linaro.org>

gitlab-ci: update aarch32/aarch64 custom runner jobs

The custom runner is now using 22.04 so we can drop our hacks to deal
with broken libssh and glusterfs. The provisioning scripts will be
updated in a separate commit.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-21-alex.bennee@linaro.org>

gitlab-ci/custom-runners: Disable -static-pie for ubuntu-20.04-aarch64

The project has reached the magic size at which we see

/usr/aarch64-linux-gnu/lib/libc.a(init-first.o): in function `__libc_init_first':
(.text+0x10): relocation truncated to fit: R_AARCH64_LD64_GOTPAGE_LO15 against \
symbol `__environ' defined in .bss section in /usr/aarch64-linux-gnu/lib/libc.a(environ.o)
/usr/bin/ld: (.text+0x10): warning: too many GOT entries for -fpic, please recompile with -fPIC

The bug has been reported upstream, but in the meantime there is
nothing we can do except build a non-pie executable.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220823210329.1969895-1-richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-20-alex.bennee@linaro.org>

configure: explicitly set cflags for --disable-pie

This is working around current limitation of Meson's handling of
--disable-pie.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-19-alex.bennee@linaro.org>

hw/ppc/spapr: Fix code style problems reported by checkpatch

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20220919231720.163121-5-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

hw/pci-host: pnv_phb{3, 4}: Fix heap out-of-bound access failure

pnv_phb3_root_bus_info and pnv_phb4_root_bus_info are missing the
instance_size initialization. This results in accessing out-of-bound
memory when setting 'chip-id' and 'phb-id', and eventually crashes
glib's malloc functionality with the following message:

  "qemu-system-ppc64: GLib: ../glib-2.72.3/glib/gmem.c:131: failed to allocate 3232 bytes"

This issue was noticed only when running qtests with QEMU Windows
32-bit executable. Windows 64-bit, Linux 32/64-bit do not expose
this bug though.

Fixes: 9ae1329ee2fe ("ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge")
Fixes: 4f9924c4d4cf ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220920103159.1865256-29-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

hw/ppc: spapr: Use qemu_vfree() to free spapr->htab

spapr->htab is allocated by qemu_memalign(), hence we should use
qemu_vfree() to free it.

Fixes: c5f54f3e31bf ("pseries: Move hash page table allocation to reset time")
Fixes: b4db54132ffe ("target/ppc: Implement H_REGISTER_PROCESS_TABLE H_CALL"")
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220920103159.1865256-28-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

tests/vm: Remove obsolete Fedora VM test

It's still based on Fedora 30 - which is not supported anymore by QEMU
since years. Seems like nobody is using (and refreshing) this, and it's
easier to test this via a container anyway, so let's remove this now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220822175317.190551-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220914155950.804707-18-alex.bennee@linaro.org>

tests/docker: remove amd64 qemu/debian10 dependency

We missed removing this dependency when we flattened the build.

Fixes 9e19fd7d4a (tests/docker: update debian-amd64 with lcitool)

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-17-alex.bennee@linaro.org>

tests/docker: remove tricore qemu/debian10 dependency

We missed removing this dependency when we flattened the build.

Fixes: 39ce923732 (gitlab: enable a very minimal build with the tricore container)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-16-alex.bennee@linaro.org>

tests/docker: flatten debian-powerpc-test-cross

Flatten into a single dockerfile. We really don't need the rest of the
stuff from the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-15-alex.bennee@linaro.org>

tests/docker: update and flatten debian-sparc64-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-14-alex.bennee@linaro.org>

tests/docker: update and flatten debian-sh4-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-13-alex.bennee@linaro.org>

tests/docker: update and flatten debian-mips64-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-12-alex.bennee@linaro.org>

tests/docker: update and flatten debian-m68k-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-11-alex.bennee@linaro.org>

tests/docker: update and flatten debian-hppa-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-10-alex.bennee@linaro.org>

tests/docker: update and flatten debian-alpha-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-9-alex.bennee@linaro.org>

tests/avocado: reduce the default timeout to 120s

We should be aiming to keep our tests under 2 minutes so lets reduce
the default timeout to that. Tests that we know take longer should
explicitly set a longer timeout.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-8-alex.bennee@linaro.org>

tests/avocado: split the AST2x00Machine classes

The SDK tests take a lot longer to run and hence need a longer
timeout. As they run well over the 60 second maximum for CI lets also
disable them for CI as well.

I suspect they also suffer from the inability to detect the login
prompt due to no newlines being processed.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-7-alex.bennee@linaro.org>

tests/avocado: add explicit timeout for ppc64le TCG tests

We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-6-alex.bennee@linaro.org>

tests/avocado: add explicit timeout for s390 TCG tests

We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-5-alex.bennee@linaro.org>

tests/avocado: add explicit timeout for Aarch64 TCG tests

We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-4-alex.bennee@linaro.org>

tests/avocado/boot_linux_console: Fix the test_aarch64_xlnx_versal_virt test

The assets that this test tries to download have been removed from the
server. Update to a newer version to get it working again.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220829080940.110831-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220914155950.804707-3-alex.bennee@linaro.org>

gitlab: reduce targets in cross_user_build_job

We already limit the scope of the cross system build to reduce the
cross build times. With the recent addition of more targets we are
also running into timeout issues for some of the cross user builds.

I've selected a few of those linux-user targets which are less likely
to be in common use as distros don't have pre-built rootfs for them.
I've also added the same CROSS_SKIP_TARGETS variable as is
occasionally used to further limit cross system builds.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-2-alex.bennee@linaro.org>

target/ppc: Clear fpstatus flags on helpers missing it

In ppc emulation, exception flags are not cleared at the end of an
instruction. Instead, the next instruction is responsible to clear
it before its emulation. However, some helpers are not doing it,
causing an issue where the previously set exception flags are being
used and leading to incorrect values being set in FPSCR.
Fix this by clearing fp_status before doing the instruction 'real' work
for the following helpers that were missing this behavior:

- VSX_CVT_INT_TO_FP_VECTOR
- VSX_CVT_FP_TO_FP
- VSX_CVT_FP_TO_INT_VECTOR
- VSX_CVT_FP_TO_INT2
- VSX_CVT_FP_TO_INT
- VSX_CVT_FP_TO_FP_HP
- VSX_CVT_FP_TO_FP_VECTOR
- VSX_CMP
- VSX_ROUND
- xscvqpdp
- xscvdpsp[n]

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-9-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>