power: supply: axp288_fuel_gauge: Deny ROCK Pi X

The ROCK Pi X is a single board computer without batteries using the
AXP288 PMIC where the EFI code does not disable the charger part of
the PMIC causing us to report a discharging battery with a continuously
consumed battery charge to userspace.

Add it to the deny-list to avoid the bogus battery status reporting.

Signed-off-by: Guoyi Zhang <kuoi@bioarchlinux.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240221083425.440108-1-kuoi@bioarchlinux.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: rmobile-reset: Map correct MMIO resource

The registers related to reset generation are located in the second
register block.  However, the conversion to device life-cycle managed
ioremap function accidentally changed the mapping to the first register
block.

Fixes: 0867276eb12230a5 ("power: reset: rmobile-reset: Use devm_platform_ioremap_resource() helper")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/3b267fb1b303f63248934a1a77bee319e1c44879.1708458882.git.geert+renesas@glider.be
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: xgene-reboot: Fix a NULL vs IS_ERR() test

The devm_platform_ioremap_resource() function returns error points.  It
never returns NULL.  Update the check accordingly.

Fixes: 7ddfd33c6ee5 ("power: reset: xgene-reboot: Use devm_platform_ioremap_resource() helper")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/fe1b90d0-7234-4e03-accc-69a119f6a7eb@moroto.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: axp288_fuel_gauge: Add STCK1A* Intel Compute Sticks to the deny-list

Besides the existing STK1A* Cherry Trail based Intel Compute Sticks
already on the deny-list, Intel also made Bay Trail based Compute Sticks
which have a product name of STCK1A* and wich also report a non
existing battery with a random battery charge.

Instead of adding 3 new deny-list entries for the 3 variants of the STCK1A*
sticks consolidate the 2 Cherry Trail STK1AW32SC and STK1A32SC variants
into a single entry with a partial match for STK1A* and add a single new
STCK1A* match for the Bay Trail variants.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212090014.13719-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

Use device life-cycle managed register function to simplify probe and
exit paths.

This also makes our data struct per-device and not global, which allows
for more than one instance of this device.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-20-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: syscon-poweroff: Move device data into a struct

Currently all these device data elements are top level global variables.
Move these into a struct. This will be used in the next patch when
the global variable usage is removed. Doing this in two steps makes
the patches easier to read.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-19-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

Use device life-cycle managed register function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-18-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: gemini-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

Use device life-cycle managed register function to simplify probe.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-17-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: as3722-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

Use device life-cycle managed register function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-16-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: regulator-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

Use device life-cycle managed register function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-15-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: msm-poweroff: Use devm_register_sys_off_handler(RESTART)

Use device life-cycle managed register function to simplify probe.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-14-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: msm-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

Use this helper to register sys_off handler. Drivers should move away from
setting pm_power_off directly as it only allows for one handler. The new
way allows for trying multiple if the first one doesn't work.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-13-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: mt6323-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

Use device life-cycle managed register function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-12-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: rmobile-reset: Use devm_register_sys_off_handler(RESTART)

Use device life-cycle managed register function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-11-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: rmobile-reset: Use devm_platform_ioremap_resource() helper

Use device life-cycle managed ioremap function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-10-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: axxia-reset: Use devm_register_sys_off_handler(RESTART)

Use device life-cycle managed register function to simplify probe.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-9-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: brcm-kona-reset: Use devm_register_sys_off_handler(RESTART)

Use device life-cycle managed register function to simplify probe.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240212162831.67838-8-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: tps65086-restart: Remove unneeded device data struct

We only need one member of the struct tps65086_restart, pass that
tps65086_restart_notify() directly. Remove that struct and its
allocation.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-7-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: tps65086-restart: Use devm_register_sys_off_handler(RESTART)

Use device life-cycle managed register function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-6-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: xgene-reboot: Use devm_register_sys_off_handler(RESTART)

Use device life-cycle managed register function to simplify probe.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: xgene-reboot: Use devm_platform_ioremap_resource() helper

Use device life-cycle managed ioremap function to simplify probe and
exit paths.

While here add __iomem to the returned pointer to fix a sparse warning.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: atc260x-poweroff: Use devm_register_sys_off_handler(POWER_OFF)

Use device life-cycle managed register function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: reset: atc260x-poweroff: Use devm_register_sys_off_handler(RESTART)

Use device life-cycle managed register function to simplify probe and
exit paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: axp20x_usb_power: enable usb_type reporting

The axp803 and axp813 chips can report the detected USB BC mode. SDP,
CDP, and DCP are supported.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-5-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: axp20x_usb_power: fix race condition with usb bc

When input_current_limit is set while USB BC is in progress, the BC
module will overwrite the value that was set when it finishes detection.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-4-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: axp20x_usb_power: use correct register for input current limit

On the axp803 and axp813 chips register 0x30 bits 0-1 is the default
current limit that gets applied after the pmic detects a CDP or DCP
port. The correct field to set is 0x35 bits 4-7.

This field only has nine values (out of the 16 possible if it used all
the bits), so introduce a field size variable to take that into account.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-3-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: axp20x_usb_power: replace current_max with input_current_limit

The current_max property is supposed to be read-only, and represent the
maximum current the supply can provide. input_current_limit is the
limit that is currently set, which is what we have here.

When determining what value to write to the register, we need to pick a
reasonable value if the requested limit doesn't exactly match one
supported by the hardware. If the requested limit is less than the
lowest value we can set, round up to the lowest value. Otherwise round
down to the nearest value supported by hardware.

Also add a dev field to the axp20x_usb_power struct, so we can use
dev_dbg and dev_err in more places.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-2-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: wm8350: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: max8925: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: max77693: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: max14577: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: twl4030_madc: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-22-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: twl4030_madc: Use devm_iio_channel_get() helper

Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-21-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: rx51: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-20-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: rx51: Use devm_iio_channel_get() helper

Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-19-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: da9150: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-18-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: da9150: Use devm_iio_channel_get() helper

Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-17-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: wm831x: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-15-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: wm831x: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-14-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: tps65090: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-13-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: rt5033: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-12-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: pcf50633: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-11-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: lp8788: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-7-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: lp8727: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-6-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: goldfish: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: ds2760: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: da9052: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: da9030: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: bq27xxx: Move one time design full read out of poll

This value only needs read once. Move that read into the function
that returns the value to keep the logic all in one place. This
also avoids doing this check every time we read in values in
the device update poll worker.

While here, correct this function's error message.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: bq27xxx: Use devm_power_supply_register() helper

Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: bq27xxx: Use devm to free device mutex

Use a device lifecycle managed action to free the device mutex.
This helps prevent mistakes like freeing out of order in cleanup
functions and forgetting to free on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: bq27xxx: Add devm action to free IDA

Use a device lifecycle managed action to free the IDA. This helps
prevent mistakes like freeing out of order in cleanup functions and
forgetting to free on error paths.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

power: supply: bq27xxx: Switch to a simpler IDA interface

We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-1-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Linux 6.8-rc1

Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Merge tag 'timers-core-2024-01-21' of git://git./linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Merge tag 'powerpc-6.8-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

bcachefs: Improve inode_to_text()

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: logged_ops_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: reflink_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; extents_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: ec_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: subvolume_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: snapshot_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: alloc_background_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: xattr_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: dirent_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: inode_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; quota_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: sb-counters_format.h

bcachefs_format.h has gotten too big; let's do some organizing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: counters.c -> sb-counters.c

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: comment bch_subvolume

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_snapshot::btime

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: add missing __GFP_NOWARN

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: opts->compression can now also be applied in the background

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Prep work for variable size btree node buffers

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: grab s_umount only if snapshotting

When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.

$ cat test.sh
prog=bcachefs

$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots

while true;do
    $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
    sleep 1s
done

$ cat /etc/mongodb.conf
systemLog:
  destination: file
  logAppend: true
  path: /mnt/data/mongod.log

storage:
  dbPath: /mnt/data/

lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G            E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
               but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
               which lock already depends on the new lock.

[ 3437.456553]
               the existing dependency chain (in reverse order) is:
[ 3437.457054]
               -> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507]        down_read+0x3e/0x170
[ 3437.457772]        bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206]        __x64_sys_ioctl+0x93/0xd0
[ 3437.458498]        do_syscall_64+0x42/0xf0
[ 3437.458779]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
               -> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615]        down_read+0x3e/0x170
[ 3437.459878]        bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276]        bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686]        notify_change+0x1f1/0x4a0
[ 3437.461283]        do_truncate+0x7f/0xd0
[ 3437.461555]        path_openat+0xa57/0xce0
[ 3437.461836]        do_filp_open+0xb4/0x160
[ 3437.462116]        do_sys_openat2+0x91/0xc0
[ 3437.462402]        __x64_sys_openat+0x53/0xa0
[ 3437.462701]        do_syscall_64+0x42/0xf0
[ 3437.462982]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
               -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843]        down_write+0x3b/0xc0
[ 3437.464223]        bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493]        vfs_write+0x21b/0x4c0
[ 3437.464653]        ksys_write+0x69/0xf0
[ 3437.464839]        do_syscall_64+0x42/0xf0
[ 3437.465009]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
               -> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471]        __lock_acquire+0x1455/0x21b0
[ 3437.465656]        lock_acquire+0xc6/0x2b0
[ 3437.465822]        mnt_want_write+0x46/0x1a0
[ 3437.465996]        filename_create+0x62/0x190
[ 3437.466175]        user_path_create+0x2d/0x50
[ 3437.466352]        bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617]        __x64_sys_ioctl+0x93/0xd0
[ 3437.466791]        do_syscall_64+0x42/0xf0
[ 3437.466957]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
               other info that might help us debug this:

[ 3437.469670] 2 locks held by bcachefs/35533:
               other info that might help us debug this:

[ 3437.467507] Chain exists of:
                 sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48

[ 3437.467979]  Possible unsafe locking scenario:

[ 3437.468223]        CPU0                    CPU1
[ 3437.468405]        ----                    ----
[ 3437.468585]   rlock(&type->s_umount_key#48);
[ 3437.468758]                                lock(&c->snapshot_create_lock);
[ 3437.469030]                                lock(&type->s_umount_key#48);
[ 3437.469291]   rlock(sb_writers#10);
[ 3437.469434]
                *** DEADLOCK ***

[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838]  #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294]  #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
               stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G            E      6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795]  <TASK>
[ 3437.471884]  dump_stack_lvl+0x57/0x90
[ 3437.472035]  check_noncircular+0x132/0x150
[ 3437.472202]  __lock_acquire+0x1455/0x21b0
[ 3437.472369]  lock_acquire+0xc6/0x2b0
[ 3437.472518]  ? filename_create+0x62/0x190
[ 3437.472683]  ? lock_is_held_type+0x97/0x110
[ 3437.472856]  mnt_want_write+0x46/0x1a0
[ 3437.473025]  ? filename_create+0x62/0x190
[ 3437.473204]  filename_create+0x62/0x190
[ 3437.473380]  user_path_create+0x2d/0x50
[ 3437.473555]  bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819]  ? lock_acquire+0xc6/0x2b0
[ 3437.474002]  ? __fget_files+0x2a/0x190
[ 3437.474195]  ? __fget_files+0xbc/0x190
[ 3437.474380]  ? lock_release+0xc5/0x270
[ 3437.474567]  ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764]  ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090]  __x64_sys_ioctl+0x93/0xd0
[ 3437.475277]  do_syscall_64+0x42/0xf0
[ 3437.475454]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================

In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.

Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().

Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:

[  406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[  406.830676 ] #PF: supervisor read access in kernel mode
[  406.831643 ] #PF: error_code(0x0000) - not-present page
[  406.832487 ] PGD 0 P4D 0
[  406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[  406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G           OE      6.7.0-rc7-custom+ #90
[  406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[  406.835796 ] RIP: 0010:kfree+0x62/0x140
[  406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[  406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[  406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[  406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[  406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[  406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[  406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[  406.840451 ] FS:  00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[  406.840851 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[  406.841464 ] Call Trace:
[  406.841583 ]  <TASK>
[  406.841682 ]  ? __die+0x1f/0x70
[  406.841828 ]  ? page_fault_oops+0x159/0x470
[  406.842014 ]  ? fixup_exception+0x22/0x310
[  406.842198 ]  ? exc_page_fault+0x1ed/0x200
[  406.842382 ]  ? asm_exc_page_fault+0x22/0x30
[  406.842574 ]  ? bch2_fs_release+0x54/0x280 [bcachefs]
[  406.842842 ]  ? kfree+0x62/0x140
[  406.842988 ]  ? kfree+0x104/0x140
[  406.843138 ]  bch2_fs_release+0x54/0x280 [bcachefs]
[  406.843390 ]  kobject_put+0xb7/0x170
[  406.843552 ]  deactivate_locked_super+0x2f/0xa0
[  406.843756 ]  cleanup_mnt+0xba/0x150
[  406.843917 ]  task_work_run+0x59/0xa0
[  406.844083 ]  exit_to_user_mode_prepare+0x197/0x1a0
[  406.844302 ]  syscall_exit_to_user_mode+0x16/0x40
[  406.844510 ]  do_syscall_64+0x4e/0xf0
[  406.844675 ]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  406.844907 ] RIP: 0033:0x7f0a2664e4fb

Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bios must be 512 byte algined

Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: remove redundant variable tmp

The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve trace_trans_restart_relock

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix excess transaction restarts in __bchfs_fallocate()

drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: extents_to_bp_state

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bkey_and_val_eq()

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Better journal tracepoints

Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Print size of superblock with space allocated

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Avoid flushing the journal in the discard path

When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.

But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve move_extent tracepoint

Also print out the data_opts, so that we can see what specifically is
being done to an extent.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add missing bch2_moving_ctxt_flush_all()

This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Re-add move_extent_write tracepoint

It appears this was accidentally deleted at some point - also, do a bit
of cleanup.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amount

Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.

This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add .val_to_text() for KEY_TYPE_cookie

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't pass memcmp() as a pointer

Some (buggy!) compilers have issues with this.

Fixes: https://github.com/koverstreet/bcachefs/issues/625
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs

Pull header fix from Kent Overstreet:
 "Just one small fixup for the RT build"

* tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs:
  spinlock: Fix failing build for PREEMPT_RT

bcachefs: Reduce would_deadlock restarts

We don't have to take locks in any particular ordering - we'll make
forward progress just fine - but if we try to stick to an ordering, it
can help to avoid excessive would_deadlock transaction restarts.

This tweaks the reflink path to take extents btree locks in the right
order.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_trans_account_disk_usage_change()

The disk space accounting rewrite is splitting out accounting for each
replicas set - those are moving to btree keys, instead of percpu
counters.

This breaks bch2_trans_fs_usage_apply() up, splitting out the part we
will still need.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_fs_usage_base

Split out base filesystem usage into its own type; prep work for
breaking up bch2_trans_fs_usage_apply().

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_prt_compression_type()

bounds checking helper, since compression types are extensible

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: helpers for printing data types

We need bounds checking since new versions may introduce new data types.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: BTREE_TRIGGER_ATOMIC

Add a new flag to be explicit about when we're running atomic triggers.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>