drm/amdgpu: Remove a redundant sanity check

The case where 'num_entries' is too big, is already handled by
struct_size(), because kvmalloc() would fail.

It will return -ENOMEM instead of -EINVAL, but it is only related to a
unlikely to happen sanity check.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Explicitly add a flexible array at the end of 'struct amdgpu_bo_list'

'struct amdgpu_bo_list' is really used as if it was ended by a flex array.
So make it more explicit and add a 'struct amdgpu_bo_list_entry entries[]'
field at the end of the structure.

This way, struct_size() can be used when it is allocated.
It is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: register edp_backlight_control() for DCN301

As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP
intermittent black screen during PnP"), we need to turn off the
display's backlight before powering off an eDP display. Not doing so
will result in undefined behaviour according to the eDP spec. So, set
DCN301's edp_backlight_control() function pointer to
dce110_edp_backlight_control().

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765
Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit")
Suggested-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Allow issue disable gfx ras cmd to firmware

Disable gfx ras command is needed in some use cases

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add bootloader wait for PSP v13

Implement the wait for bootloader call back for PSP v13.0 ASICs. Only
for ASICs with PSP v13.0.6, it needs an additional check for VBIOS
mailbox status.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: register a dirty framebuffer callback for fbcon

fbcon requires that we implement &drm_framebuffer_funcs.dirty.
Otherwise, the framebuffer might take a while to flush (which would
manifest as noticeable lag). However, we can't enable this callback for
non-fbcon cases since it may cause too many atomic commits to be made at
once. So, implement amdgpu_dirtyfb() and only enable it for fbcon
framebuffers (we can use the "struct drm_file file" parameter in the
callback to check for this since it is only NULL when called by fbcon,
at least in the mainline kernel) on devices that support atomic KMS.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Replace print_clock_levels with emit_clock_levels for arcturus

Replace print_clock_levels with emit_clock_levels for arcturus
  * replace .print_clk_levels with .emit_clk_levels in arcturus_ppt_funcs
  * added extra parameter int *offset
  * removed var size, uses arg *offset instead
  * removed call to smu_cmn_get_sysfs_buf
  * errors are returned to caller
  * returns 0 on success
additional incidental changes
  * changed type of var i, now to remove comparing mismatch types
  * renamed var s/now/cur_value/
  * switch statement default now returns -EINVAL
  * RAS Recovery returns -EBUSY

Based on
  commit b06b48d7ddae ("amdgpu/pm: Implement emit_clk_levels for navi10")

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fulfill the support for SMU13 `pp_dpm_dcefclk` interface

Fulfill the incomplete SMU13 `pp_dpm_dcefclk` implementation.

Reported-by: Guan Yu <guan.yu@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct SMU13 gfx voltage related OD settings

The voltage offset setting will be applied to the whole v/f curve line
instead of per anchor point base.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: Remove the duplicate dpm status check

Since the smu firmware has fixed the issue that described in the commit 60d61f4ed6ea
("drm/amdgpu/pm: fix the Stable pstate Test in amdgpu_test").
So we only need keep dpm status check in the funciton - smu_v13_0_5_set_soft_freq_limited_range.

Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Vangogh: Get average_* from average field of gpu_metrics_table

for older BIOS, smu won't fill average field of gpu_metrics_table, so we acquire
average_* from current field. but now average value is available in gpu_metrics_v2_4

Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fixes incorrect type in 'amdgpu_hwmon_show_power_avg() & _input()'

The val is defined as unsigned int type, if(val<0) is invalid, hence
modified its type to ssize_t

Fixes the below:

drivers/gpu/drm/amd/pm/amdgpu_pm.c:2800:5-8: WARNING: Unsigned expression compared with zero: val < 0
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2813:5-8: WARNING: Unsigned expression compared with zero: val < 0

Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix error flow in sensor fetching

Sensor fetching functions should return an signed int to
handle errors properly.

Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Updated TCP/UTCL1 programming

Update TCP/UTCL1 thrashing control settings

v2: updated rev_id check

Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix kcalloc over kzalloc in 'gmc_v9_0_init_mem_ranges'

Replace kzalloc(n * sizeof(...), ...) with kcalloc(n, sizeof(...), ...)
since kcalloc is the preferred API in case of allocating with multiply.

Fixes the below:

WARNING: Prefer kcalloc over kzalloc with multiply

Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix debugfs pm_info output

Print both input and avg power.

Fixes: 47f1724db4fe ("drm/amd: Introduce `AMDGPU_PP_SENSOR_GPU_INPUT_POWER`")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Share the original BO for GTT mapping

If mGPUs is on same IOMMU group, or is ram direct mapped, then mGPUs
can share the original BO for GTT mapping dma address, without creating
new BO from export/import dmabuf.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix the return for gpu mode1_reset

amdgpu_device_mode1_reset will return gpu mode1_reset
succeed (ret = 0) as long as wait_for_bootloader call
succeed, regardless of the status reported by smu or
psp firmware. This results to driver continue executing
recovery even smu or psp fail to perform mode1 reset.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.248

This version brings along following fixes:
- Ensure FS is enabled before sending request to DMUB for FS changes
- Add check for PMFW hard min request complete
- Save addr update in scratch before flip
- Fix static screen detection setting
- Write flip addr to scratch reg for subvp
- set minimum of VBlank_nom
- Correct unit conversion for vstartup
- Roll back unit correction
- Enable runtime register offset init for DCN32 DMUB
- Refactor edp power control
- PQ regamma end point
- PQ tail accuracy
- Expose mall capability

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.180.0

 - Remove unused flag otg_powered_down

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: ensure FS is enabled before sending request to DMUB for FS changes

[Why]
ignore_msa_timing_param indicates FS is capable but not necessarily enabled

[How]
add check for either allow_freesync or vrr_active_variable to confirm FS is enabled

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add check for PMFW hard min request complete

[Why]
When we issue hard min request to PMFW, the ack back does not
guarantee the request has been fulfilled.

[How]
Add new PMFW message to check if the hard min request has been
completed. Returned bit mask indicates which clock requests are
completed. Check PMFW version before using message

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Save addr update in scratch before flip

[Why & How]
Fix a minor sequencing issue where the address update for
a subvp flip should be saved in scratch registers before
the actual flip

Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix static screen detection setting

[WHY]
OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3,
but we still follow DCN2 to apply setting for
OTG_STATIC_SCREEN_EVENT_MASK.

[How]
Add new function to apply correct settings for DCN3 series.

Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: SungHuai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gfxhub 11.5.0 support

Add initial gfxhub 11.5 support.

Signed-off-by: benl <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable gmc11 for GC 11.5.0

Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mmhub 3.3.0 support

Add initial implementation for mmhub 3.3.0.

v2: squash in client id fix (Alex)

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mmhub 3.3.0 headers

Add new headers.

v2: updates (Alex)

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: enable gfx11 for GC 11.5.0

Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: enable mes block for gc 11.5.0

Add to IP discovery table.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mes firmware support for gc_11_5_0

Add scheduler and kiq firmware support for gc_11_5_0.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add imu firmware support for gc_11_5_0

Add imu firmware support for gc_11_5_0.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add KFD support for GC 11.5.0

Enable KFD for GC 11.5.0.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add golden setting for gc_11_5_0

Initialize golden setting for gc_11_5_0.

v2: squash in latest golden updates (Alex)
v3: squash in checkpatch fix (Alex)

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx11: initialize gfx11.5.0

Initalize gfx 11.5.0 and set gfx hw configuration.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc11: initialize GMC for GC 11.5.0 memory support

Initialize vram attribute and VMHUB for GC 11.5.0.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gc headers for gc 11.5.0

Add gc_11_5_0 headers.

v2: updates (Alex)

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: add nbio 7.11.0 support

Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add nbio 7.11 support

Add initial nbio 7.11 implementation.

Signed-off-by: benl <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add nbio 7.11 registers

Add register headers.

v2: Updates (Alex)
v3: Updates (Alex)
v4: Updates (Alex)

Signed-off-by: benl <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: enable soc21 support

Add 11.5.0 to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/soc21: add initial GC 11.5.0 soc21 support

Disable clock gating and power gating on the early bring up phase.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new AMDGPU_FAMILY definition

add GC 11.5.0 family

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use 6.1.0 register offset for HDP CLK_CNTL

Use 6.1.0 register offset and remove unused variable.

v2: clean up logic (Alex)

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: possible buffer overflow

Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is
checked after access.

Fixes: 5cc4e5fc293b ("drm/radeon: Cleanup HDMI audio interrupt handling for evergreen")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix mode scaling (RMX_.*)

As made mention of in commit 4a2df0d1f28e ("drm/amd/display: Fixed
non-native modes not lighting up"), we shouldn't call
drm_mode_set_crtcinfo() once the crtc timings have been decided. Since,
it can cause settings to be unintentionally overwritten. So, since
dm_state is never NULL now, we can use old_stream to determine if we
should call drm_mode_set_crtcinfo() because we only need to set the crtc
timing parameters for entirely new streams.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Fixes: bd49f19039c1 ("drm/amd/display: Always set crtcinfo from create_stream_for_sink")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix critical temp unit of SMU v13.0.6

Critical Temperature needs to be reported in
millidegree Celsius.

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove SRAM clock gater override by driver

rlc firmware does required setting, driver need not do it.

Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add bootloader status check

Add a function to wait till bootloader has reached steady state.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: use correct method to get clock under SRIOV

[What]
Current SRIOV still using adev->clock.default_XX which gets from
atomfirmware. But these fields are abandoned in atomfirmware long ago.
Which may cause function to return a 0 value.

[How]
We don't need to check whether SR-IOV. For SR-IOV one-vf-mode,
pm is enabled and VF is able to read dpm clock
from pmfw, so we can use dpm clock interface directly. For
multi-VF mode, VF pm is disabled, so driver can just react as pm
disabled. One-vf-mode is introduced from GFX9 so it shall not have
any backward compatibility issue.

Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Unset baco dummy mode on nbio v7.9

BACO dummy mode could be set under reset conditions and that affects
framebuffer access. Check If baco dummy mode is set, unset it if so.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Write flip addr to scratch reg for subvp

[Description]
SubVP needs to "calculate" the earliest in use META address
by using the current primary / meta addresses, but this leads
to a race condition where FW and driver can read/write the
address at the same time and intermittently produce inconsistent
address offsets. To mitigate this issue without locking (too slow),
save each surface flip addr into scratch registers and use this
to keep track of the earliest in use META addres.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set minimum of VBlank_nom

[Why]
If VBlank_nom is too small, it will cause
VStartUP_Start smaller than VBackPorch + VSync width which is an
invalid case for VStartUP_Start and where to send AS-SDP.

[How]
Setup a minimum value to VBlank_nom

Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct unit conversion for vstartup

[why]
vstartup is calculated to be a large number. it works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.

[how]
Calculation needs to convert micro seconds to number of
vertical lines.

Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Roll back unit correction

[why]
This Unit correction exposes a Replay corruption.

[how]
This reverts commit:
commit dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup")

Roll back unit conversion until Replay can fix their corruption.

Fixes: dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup")
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable runtime register offset init for DCN32 DMUB

[Why&How]
DMUB subsystem was continuing to use compile time offset calculation for
register access. Switch this to runtime calculation to stay consistent
with rest of DC code.

To enable this, an additional interface init_reg_offsets() are added to
DMUB's hw_funcs struct. Asics with runtime register offset calculation
enabled shall populate this hook with a fn pointer that will invoke the
necessary macros to calculate the offset.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor edp power control

[Why & How]
To organize the edp power control a bit:

1. add flag in dc_link to indicate dc to skip all implicit eDP power control.
2. add edp_set_panel_power link service for DM to call.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: PQ regamma end point

[WHY & HOW]
PQ has a fixed range of 0-10,000 nits.
Using 1=80 nits normalization, PQ should map to 1.0 for X=125.0
HW LUT used for interpolation does not have X=125 so it's interpolated.
However, we cap Y to 1 for all X>=125.

The closest larger HW point is 128.
What we want is Y(128) such that interpolation through 125 gives 1.0.
Such value is ~1.00256.
Another change is to hardcode PQ table, we pretty much always have 1=80
normalization so the table can be static.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: PQ tail accuracy

[WHY & HOW]
HW LUTs changed slightly in DCN3: 256 base+slope pairs were replaced by
257 bases. Code was still calculating all 256 base+slope and then
creating 257th pt as last base + last slope.
This was done in wrong format, and then "fixed" it by making the last
two points the same thus making the last slope=0.
However, this also created some precision problems near the end that
are not visible but they do show up with capture cards.

Solution is to calculate 257 and remove deltas since we no longer have
those HW registers.

Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expose mall capability

[Why&How]
Export a debugfs file to report whether MALL cache is supported by the
asic or not.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix useless else if in display_mode_vba_util_32.c

The assignment of the else if and else branches is the same, so the else if
here is redundant, hence removed it.

Fixes the below:

drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c:4664:8-10: WARNING: possible condition with no effect (if == else)

Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable ras for mp0 v13_0_6 sriov

Enable ras for mp0 v13_0_6 sriov

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Cleanup radeon/radeon_fence.c

Fixes the following:

WARNING: Possible repeated word: 'Fences'
WARNING: Missing a blank line after declarations
WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: quoted string split across lines
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix unnecessary conversion to bool in 'amdgpu_dm_setup_replay'

Fixes the following coccicheck:

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_replay.c:94:102-107: WARNING: conversion to bool not needed here
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_replay.c:102:72-77: WARNING: conversion to bool not needed here

Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: retry after EBUSY is returned from hmm_ranges_get_pages

if hmm_range_get_pages returns EBUSY error during
svm_range_validate_and_map, within the context of a page fault
interrupt. This should retry through svm_range_restore_pages
callback. Therefore we treat this as EAGAIN error instead, and defer
it to restore pages fallback.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg - skip change of power-gating state for sriov

Powergating is handled in the host driver.

Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Keep reset handlers shared

Instead of maintaining a list per device, keep the reset handlers common
per ASIC family. A pointer to the list of handlers is maintained in
reset control.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add critical temp for GC v9.4.3

Add critical temperature message support func for smu v13.0.6
and expose critical temperature as part of hw mon attributes
for GC v9.4.3

v2:
Added comment for pmfw version requirement & move the check
to get_thermal_temperature_range function

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Update SMUv13.0.6 PMFW headers

Update PMFW interface headers for updated metrics table and
critical temperature message

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update gc_info v2_1 from discovery

Several new fields are exposed in gc_info v2_1

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update mall info v2 from discovery

Mall info v2 is introduced in ip discovery

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Only support RAS EEPROM on dGPU platform

RAS EEPROM device is only supported on dGPU platform for smu v13_0_6.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Update amdgpu documentation

7957ec80ef97 ("drm/amdgpu: Add FRU sysfs nodes only if needed") moved
the documentation for some of the sysfs nodes to amdgpu_fru_eeprom.c.
Update the documentation accordingly.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Use kmemdup to simplify kmalloc and memcpy logic

Using kmemdup() helper function rather than implementing it again
with kmalloc() + memcpy(), which improves the code readability.

Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: Add notification for no DC support

- There is a DPM issue where if DC is not present,
  FCLK will stay at low level.
  We need to send a SMU message to configure the DPM

- Reuse smu_v13_0_notify_display_change() for this purpose

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable Replay for static screen use cases

- Setup replay config on device init.
- Enable replay if feature is enabled (prioritize replay over PSR, since
it can be enabled in more usecases)
- Add debug masks to enable replay on supported ASICs

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-fixes-2023-08-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix TLB invalidation (Alan)
- Fix Display HPD polling (Imre)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZOdOP31OE/Cf1ojo@intel.com

Merge tag 'drm-misc-next-fixes-2023-08-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * gpuva: Cleanups

 * kunit: Documentation fixes

 * nouveau:
   * UAPI: Avoid implicit NO_PREFETCH flag
   * Scheduler fixes
   * Fix remap

 * ttm: Fix type conversion in tests

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230824181241.GA6386@linux-uq9g.hotspot.internet-for-guests.com

drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()

The prev pointer in __drm_gpuva_sm_map() was used to implement automatic
merging of mappings. Since automatic merging did not make its way
upstream, remove this leftover.

Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823233119.2891-1-dakr@redhat.com

drm/tests/drm_kunit_helpers: Place correct function name in the comment header

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/tests/drm_kunit_helpers.c:172: warning: expecting prototype for drm_kunit_helper_context_alloc(). Prototype was for drm_kunit_helper_acquire_ctx_alloc() instead

Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230824073710.2677348-10-lee@kernel.org
Link: https://lore.kernel.org/r/20230824073710.2677348-14-lee@kernel.org
[mripard: Squashed the two patches together]
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly

Currently, NO_PREFETCH is passed implicitly through
drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len.

Since this is a direct representation of how the HW is programmed it
isn't really future proof for a uAPI. Hence, fix this up for the new
uAPI and split up the va_len field of struct drm_nouveau_exec_push,
such that we keep 32bit for va_len and 32bit for flags.

For drm_nouveau_gem_pushbuf_push::length at least provide
NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift.

While at it, fix up nv50_dma_push() as well, such that the caller
doesn't need to encode the NO_PREFETCH flag into the length parameter.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com

drm/nouveau: uvmm: fix unset region pointer on remap

Transfer the region pointer of a uvma to the new uvma(s) on re-map to
prevent potential shader faults when the re-mapped uvma(s) are unmapped.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230820222920.2344-1-dakr@redhat.com

drm/nouveau: sched: avoid job races between entities

If a sched job depends on a dma-fence from a job from the same GPU
scheduler instance, but a different scheduler entity, the GPU scheduler
does only wait for the particular job to be scheduled, rather than for
the job to fully complete. This is due to the GPU scheduler assuming
that there is a scheduler instance per ring. However, the current
implementation, in order to avoid arbitrary amounts of kthreads, has a
single scheduler instance while scheduler entities represent rings.

As a workaround, set the DRM_SCHED_FENCE_DONT_PIPELINE for all
out-fences in order to force the scheduler to wait for full job
completion for dependent jobs from different entities and same scheduler
instance.

There is some work in progress [1] to address the issues of firmware
schedulers; once it is in-tree the scheduler topology in Nouveau should
be re-worked accordingly.

[1] https://lore.kernel.org/dri-devel/20230801205103.627779-1-matthew.brost@intel.com/

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collaboralcom>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811010632.2473-1-dakr@redhat.com

Merge tag 'drm-msm-next-2023-08-20' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.6, which includes a backmerge of msm-fixes to avoid conficts.

Core:
- SM6125 MDSS support

DPU:
- SM6125 DPU support
- Added subblocks to display snapshot
- Use UBWC data from MDSS driver rather than duplicating it
- dpu_core_perf cleanup

DSI:
- Enabled burst mode to fix CMD mode panels
- Runtime PM support
- refgen regulator support

DSI PHY:
- SM6125 support in 14nm DSI PHY driver

GPU:
- Rework GPU identification to prepare for a7xx, and other a7xx prep
- Cleanups and fixes
- Disallow legacy relocs on a6xx and newer
- a690: switch to using a660_gmu.bin fw as this is what we have in
  linux-firmware and we see no evidence that it should be different
  from other a660 family (a6xx subgen 4) devices
- Submit overhead opts, 1.6x faster for NO_IMPLICIT_SYNC commits with
  100 BOs to 2.5x faster for 1000 BOs

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv_01g-edjdfKLWWcb-rO5aSyLsv5FpbKrTkXVL9+ngTQ@mail.gmail.com

BackMerge tag 'v6.5-rc7' into drm-next

Linux 6.5-rc7

This is needed for the CI stuff and the msm pull has fixes in it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915: Fix HPD polling, reenabling the output poll work as needed

After the commit in the Fixes: line below, HPD polling stopped working
on i915, since after that change calling drm_kms_helper_poll_enable()
doesn't restart drm_mode_config::output_poll_work if the work was
stopped (no connectors needing polling) and enabling polling for a
connector (during runtime suspend or detecting an HPD IRQ storm).

After the above change calling drm_kms_helper_poll_enable() is a nop
after it's been called already and polling for some connectors was
disabled/re-enabled.

Fix this by calling drm_kms_helper_poll_reschedule() added in the
previous patch instead, which reschedules the work whenever expected.

Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled")
CC: stable@vger.kernel.org # 6.4+
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-2-imre.deak@intel.com
(cherry picked from commit 50452f2f76852322620b63e62922b85e955abe94)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm: Add an HPD poll helper to reschedule the poll work

Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).

This is needed by the next patch fixing HPD polling on i915.

CC: stable@vger.kernel.org # 6.4+
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-1-imre.deak@intel.com
(cherry picked from commit fe2352fd64029918174de4b460dfe6df0c6911cd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Fix TLB-Invalidation seqno store

When getting the next gt's seqno to be stored into an
objects mm.tlb[gt_id] array, fix the retrieval code
to get it from the correct gt instead of the same one.

Fixes: d6c531ab4820 ("drm/i915: Invalidate the TLBs on each GT")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814182449.1060747-1-alan.previn.teres.alexis@intel.com
(cherry picked from commit 90b8ad13536e80b1b4d9ed1c9d527e64ee757c26)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/ttm/tests: Fix type conversion in ttm_pool_test

Fix a warning about casting an integer of different size in
ttm_pool_alloc_basic_dma_addr() subtest. Cast the DMA address to
uintptr_t before casting it to a generic pointer.

Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308150419.PaHfWntn-lkp@intel.com/
Link: https://patchwork.freedesktop.org/patch/msgid/20230816105508.1135410-1-karolina.stolarek@intel.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

Merge tag 'amd-drm-next-6.6-2023-08-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.6-2023-08-18:

amdgpu:
- Panel replay fixes
- Misc checkpatch fixes
- SMU 13.x fixes
- mcbp parameter handling fix for gfx9
- RAS fixes
- Misc code cleanups
- SR-IOV fixes
- Expose both current and average power via hwmon if supported
- DP retimer fix
- Clockgating fix
- Subvp fixes
- DMCUB fixes
- Gamut remap fix
- Misc display fixes
- Allow users to force runtime pm when displays are attached
- Gracefully handle more partitions than drm nodes
- S0ix fixes
- GC 9.4.3 fixes

amdkfd:
- TBA fix for aldebaran
- Fix build without CONFIG_DYNAMIC_DEBUG
- memdup cleanup
- Fix address watch clearing

radeon:
- Misc code cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818195247.10981-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * Add MMU dependency to TTM unit tests
 * panel: Fix Innolux G156HCE-L01 LVDS clock

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817131832.GA9361@linux-uq9g

Linux 6.5-rc7

Merge tag 'tty-6.5-rc7' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial core fixes for 6.5-rc7 that resolve
  a lot of reported issues.

  Primarily in here are the fixes for the serial bus code from Tony that
  came in -rc1, as it hit wider testing with the huge number of
  different types of systems and serial ports. All of the reported
  issues with duplicate names and other issues with this code are now
  resolved.

  Other than that included in here is:

   - n_gsm fix for a previous fix

   - 8250 lockdep annotation fix

   - fsl_lpuart serial driver fix

   - TIOCSTI documentation update for previous CAP_SYS_ADMIN change

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: core: Fix serial core port id, including multiport devices
  serial: 8250: drop lockdep annotation from serial8250_clear_IER()
  tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
  serial: core: Revert port_id use
  TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
  serial: 8250: Fix oops for port->pm on uart_change_pm()
  serial: 8250: Reinit port_id when adding back serial8250_isa_devs
  serial: core: Fix kmemleak issue for serial core device remove
  MAINTAINERS: Merge TTY layer and serial drivers
  serial: core: Fix serial_base_match() after fixing controller port name
  serial: core: Fix serial core controller port name to show controller id
  serial: core: Fix serial core port id to not use port->line
  serial: core: Controller id cannot be negative
  tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms

Merge tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux

Pull rust fix from Miguel Ojeda:

 - Macros: fix 'HAS_*' redefinition by the '#[vtable]' macro
   under conditional compilation

* tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux:
  rust: macros: vtable: fix `HAS_*` redefinition (`gen_const_name`)

Merge tag 'i2c-for-6.5-rc7' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Usual set of driver fixes. A bit more than usual because I was
  unavailable for a while"

* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
  i2c: Update documentation to use .probe() again
  i2c: sun6i-p2wi: Fix an error message in probe()
  i2c: hisi: Only handle the interrupt of the driver's transfer
  i2c: tegra: Fix i2c-tegra DMA config option processing
  i2c: tegra: Fix failure during probe deferral cleanup
  i2c: designware: Handle invalid SMBus block data response length value
  i2c: designware: Correct length byte validation logic
  i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work

Merge tag 'for-6.5-rc6-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

 - fix infinite loop in readdir(), could happen in a big directory when
   files get renamed during enumeration

 - fix extent map handling of skipped pinned ranges

 - fix a corner case when handling ordered extent length

 - fix a potential crash when balance cancel races with pause

 - verify correct uuid when starting scrub or device replace

* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
  btrfs: fix BUG_ON condition in btrfs_cancel_balance
  btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
  btrfs: fix replace/scrub failure with metadata_uuid
  btrfs: fix infinite directory reads

Merge tag 'fbdev-for-6.5-rc7' of git://git./linux/kernel/git/deller/linux-fbdev

Pull fbdev fixes and cleanups from Helge Deller:

 - various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
   goldfishfb

* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: goldfishfb: Do not check 0 for platform_get_irq()
  fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
  fbdev: kyro: Remove unused declarations
  fbdev: ssd1307fb: Print the PWM's label instead of its number
  fbdev: mmp: fix value check in mmphw_probe()
  fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper

Merge tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:
 "Main thing here is the fix for the regression in flush handling which
  caused IO hangs/stalls for a few reporters. Hopefully that should all
  be sorted out now. Outside of that, just a few minor fixes for issues
  that were introduced in this cycle"

* tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux:
  blk-mq: release scheduler resource when request completes
  blk-crypto: dynamically allocate fallback profile
  blk-cgroup: hold queue_lock when removing blkg->q_node
  drivers/rnbd: restore sysfs interface to rnbd-client

blk-mq: release scheduler resource when request completes

Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit 615939a2ae73 ("blk-mq: defer to the normal
submission path for post-flush requests").

We analysed the IO hang problem, found there are two postflush requests
waiting for each other.

The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.

The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.

Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.

While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.

[1] https://lore.kernel.org/all/7A57C7AE-A51A-4254-888B-FE15CA21F9E9@oracle.com/

Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308172100.8ce4b853-oliver.sang@intel.com
Fixes: 615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'media/v6.5-3' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "Three driver fixes"

* tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: imx: imx7-media-csi: Fix applying format constraints
  media: uvcvideo: Fix menu count handling for userspace XU mappings
  media: mtk-jpeg: Set platform driver data earlier