python/qemu: add qemu package itself to pipenv

This adds the python qemu packages themselves to the pipenv manifest.
'pipenv sync' will create a virtual environment sufficient to use the SDK.
'pipenv sync --dev' will create a virtual environment sufficient to use
and test the SDK (with pylint, mypy, isort, flake8, etc.)

The qemu packages are installed in 'editable' mode; all changes made to
the python package inside the git tree will be reflected in the
installed package without reinstallation. This includes changes made
via git pull and so on.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-26-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/qemu: add isort to pipenv

isort 5.0.0 through 5.0.4 has a bug that causes it to misinterpret
certain "from ..." clauses that are not related to imports.

isort < 5.1.1 has a bug where it does not handle comments near import
statements correctly.

Require 5.1.2 or greater.

isort can be run (in "check" mode) with 'isort -c qemu' from the python
root. isort can also be used to fix/rewrite import order automatically
by using 'isort qemu'.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-25-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: move .isort.cfg into setup.cfg

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-24-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add mypy to pipenv

0.730 appears to be about the oldest version that works with the
features we want, including nice human readable output (to make sure
iotest 297 passes), and type-parameterized Popen generics.

0.770, however, supports adding 'strict' to the config file, so require
at least 0.770.

Now that we are checking a namespace package, we need to tell mypy to
allow PEP420 namespaces, so modify the mypy config as part of the move.

mypy can now be run from the python root by typing 'mypy -p qemu'.

A note on mypy invocation: Running it as "mypy qemu/" changes the import
path detection mechanisms in mypy slightly, and it will fail. See
https://github.com/python/mypy/issues/8584 for a decent entry point with
more breadcrumbs on the various behaviors that contribute to this subtle
difference.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-23-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: move mypy.ini into setup.cfg

mypy supports reading its configuration values from a central project
configuration file; do so.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-22-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: Add flake8 to pipenv

flake8 3.5.x does not support the --extend-ignore syntax used in the
.flake8 file to gracefully extend default ignores, so 3.6.x is our
minimum requirement. There is no known upper bound.

flake8 can be run from the python/ directory with no arguments.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-21-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add excluded dirs to flake8 config

Instruct flake8 to avoid certain well-known directories created by
python tooling that it ought not check.

Note that at-present, nothing actually creates a ".venv" directory; but
it is in such widespread usage as a de-facto location for a developer's
virtual environment that it should be excluded anyway. A forthcoming
commit canonizes this with a "make venv" command.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: move flake8 config to setup.cfg

Update the comment concerning the flake8 exception to match commit
42c0dd12, whose commit message stated:

A note on the flake8 exception: flake8 will warn on *any* bare except,
but pylint's is context-aware and will suppress the warning if you
re-raise the exception.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add pylint to pipenv

We are specifying >= pylint 2.8.x for several reasons:

1. For setup.cfg support, added in pylint 2.5.x
2. To specify a version that has incompatibly dropped
   bad-whitespace checks (2.6.x)
3. 2.7.x fixes "unsubscriptable" warnings in Python 3.9
4. 2.8.x adds a new, incompatible 'consider-using-with'
   warning that must be disabled in some cases.
   These pragmas cause warnings themselves in 2.7.x.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: move pylintrc into setup.cfg

Delete the empty settings now that it's sharing a home with settings for
other tools.

pylint can now be run from this folder as "pylint qemu".

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add pylint import exceptions

Pylint 2.5.x - 2.7.x have regressions that make import checking
inconsistent, see:

https://github.com/PyCQA/pylint/issues/3609
https://github.com/PyCQA/pylint/issues/3624
https://github.com/PyCQA/pylint/issues/3651

Pinning to 2.4.4 is worse, because it mandates versions of shared
dependencies that are too old for features we want in isort and mypy.
Oh well.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: Add pipenv support

pipenv is a tool used for managing virtual environments with pinned,
explicit dependencies. It is used for precisely recreating python
virtual environments.

pipenv uses two files to do this:

(1) Pipfile, which is similar in purpose and scope to what setup.cfg
lists. It specifies the requisite minimum to get a functional
environment for using this package.

(2) Pipfile.lock, which is similar in purpose to `pip freeze >
requirements.txt`. It specifies a canonical virtual environment used for
deployment or testing. This ensures that all users have repeatable
results.

The primary benefit of using this tool is to ensure *rock solid*
repeatable CI results with a known set of packages. Although I endeavor
to support as many versions as I can, the fluid nature of the Python
toolchain often means tailoring code for fairly specific versions.

Note that pipenv is *not* required to install or use this module; this is
purely for the sake of repeatable testing by CI or developers.

Here, a "blank" pipfile is added with no dependencies, but specifies
Python 3.6 for the virtual environment.

Pipfile will specify our version minimums, while Pipfile.lock specifies
an exact loadout of packages that were known to operate correctly. This
latter file provides the real value for easy setup of container images
and CI environments.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add MANIFEST.in

When creating a source or binary distribution via 'python3 setup.py
<sdist|bdist>', the VERSION and PACKAGE.rst files aren't bundled by
default. Create a MANIFEST.in file that instructs the build tools to
include these so that installation from these files won't fail.

This is required by 'tox', as well as by the tooling needed to upload
packages to PyPI.

Exclude the 'README.rst' file -- that's intended as a guidebook to our
source tree, not a file that needs to be distributed.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add directory structure README.rst files

Add short readmes to python/, python/qemu/, python/qemu/machine,
python/qemu/qmp, and python/qemu/utils that explain the directory
hierarchy. These readmes are visible when browsing the source on
e.g. gitlab/github and are designed to help new developers/users quickly
make sense of the source tree.

They are not designed for inclusion in a published manual.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add VERSION file

Python infrastructure as it exists today is not capable reliably of
single-sourcing a package version from a parent directory. The authors
of pip are working to correct this, but as of today this is not possible.

The problem is that when using pip to build and install a python
package, it copies files over to a temporary directory and performs its
build there. This loses access to any information in the parent
directory, including git itself.

Further, Python versions have a standard (PEP 440) that may or may not
follow QEMU's versioning. In general, it does; but naturally QEMU does
not follow PEP 440. To avoid any automatically-generated conflict, a
manual version file is preferred.

I am proposing:

- Python tooling follows the QEMU version, indirectly, but with a major
  version of 0 to indicate that the API is not expected to be
  stable. This would mean version 0.5.2.0, 0.5.1.1, 0.5.3.0, etc.

- In the event that a Python package needs to be updated independently
  of the QEMU version, a pre-release alpha version should be preferred,
  but *only* after inclusion to the qemu development or stable branches.

  e.g. 0.5.2.0a1, 0.5.2.0a2, and so on should be preferred prior to
  5.2.0's release.

- The Python core tooling makes absolutely no version compatibility
  checks or constraints. It *may* work with releases of QEMU from the
  past or future, but it is not required to.

  i.e., "qemu.machine" will, for now, remain in lock-step with QEMU.

- We reserve the right to split the qemu package into independently
  versioned subpackages at a later date. This might allow for us to
  begin versioning QMP independently from QEMU at a later date, if
  we so choose.

Implement this versioning scheme by adding a VERSION file and setting it
to 0.6.0.0a1.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add qemu package installer

Add setup.cfg and setup.py, necessary for installing a package via
pip. Add a ReST document (PACKAGE.rst) explaining the basics of what
this package is for and who to contact for more information. This
document will be used as the landing page for the package on PyPI.

List the subpackages we intend to package by name instead of using
find_namespace because find_namespace will naively also packages tests,
things it finds in the dist/ folder, etc. I could not figure out how to
modify this behavior; adding allow/deny lists to setuptools kept
changing the packaged hierarchy. This works, roll with it.

I am not yet using a pyproject.toml style package manifest, because
"editable" installs are not defined (yet?) by PEP-517/518.

I consider editable installs crucial for development, though they have
(apparently) always been somewhat poorly defined.

Pip now (19.2 and later) now supports editable installs for projects
using pyproject.toml manifests, but might require the use of the
--no-use-pep517 flag, which somewhat defeats the point. Full support for
setup.py-less editable installs was not introduced until pip 21.1.1:
https://github.com/pypa/pip/pull/9547/commits/7a95720e796a5e56481c1cc20b6ce6249c50f357

For now, while the dust settles, stick with the de-facto
setup.py/setup.cfg combination supported by setuptools. It will be worth
re-evaluating this point again in the future when our supported build
platforms all ship a fairly modern pip.

Additional reading on this matter:

https://github.com/pypa/packaging-problems/issues/256
https://github.com/pypa/pip/issues/6334
https://github.com/pypa/pip/issues/6375
https://github.com/pypa/pip/issues/6434
https://github.com/pypa/pip/issues/6438

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: create qemu packages

move python/qemu/*.py to python/qemu/[machine, qmp, utils]/*.py and
update import directives across the tree.

This is done to create a PEP420 namespace package, in which we may
create subpackages. To do this, the namespace directory ("qemu") should
not have any modules in it. Those files will go into new 'machine',
'qmp' and 'utils' subpackages instead.

Implement machine/__init__.py making the top-level classes and functions
from its various modules available directly inside the package. Change
qmp.py to qmp/__init__.py similarly, such that all of the useful QMP
library classes are available directly from "qemu.qmp" instead of
"qemu.qmp.qmp".

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

iotests/297: add --namespace-packages to mypy arguments

mypy is kind of weird about how it handles imports. For legacy reasons,
it won't load PEP 420 namespaces, because of logic implemented prior to
that becoming a standard.

So, if you plan on using any, you have to pass
--namespace-packages. Alright, fine.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/machine: Trim line length to below 80 chars

One more little delinting fix that snuck in.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/machine: disable warning for Popen in _launch()

We handle this resource rather meticulously in
shutdown/kill/wait/__exit__ et al, through the laborious mechanisms in
_do_shutdown().

Quiet this pylint warning here.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-7-jsnow@redhat.com
Message-id: 20210517184808.3562549-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/machine: Disable pylint warning for open() in _pre_launch

Shift the open() call later so that the pylint pragma applies *only* to
that one open() call. Add a note that suggests why this is safe: the
resource is unconditionally cleaned up in _post_shutdown().

_post_shutdown is called after failed launches (see launch()), and
unconditionally after every call to shutdown(), and therefore also on
__exit__.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-6-jsnow@redhat.com
Message-id: 20210517184808.3562549-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/console_socket: Add a pylint ignore

We manage cleaning up this resource ourselves. Pylint should shush.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-5-jsnow@redhat.com
Message-id: 20210517184808.3562549-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/machine: use subprocess.run instead of subprocess.Popen

use run() instead of Popen() -- to assert to pylint that we are not
forgetting to close a long-running program.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-4-jsnow@redhat.com
Message-id: 20210517184808.3562549-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/machine: use subprocess.DEVNULL instead of open(os.path.devnull)

One less file resource to manage, and it helps quiet some pylint >=
2.8.0 warnings about not using a with-context manager for the open call.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-3-jsnow@redhat.com
Message-id: 20210517184808.3562549-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/console_socket: avoid one-letter variable

Fixes pylint warnings.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210527211715.394144-2-jsnow@redhat.com
Message-id: 20210517184808.3562549-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

acceptance tests: bump Avocado version to 88.1

Besides some internal changes, new features, and bug fixes, on the QEMU side,
this version fixes the following message seen when running the acceptance
tests: "Error running method "pre_tests" of plugin "fetchasset": 'bytes'
object has no attribute 'encode'".

The release notes are available at
https://avocado-framework.readthedocs.io/en/latest/releases/88_0.html.

Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210520204747.210764-2-willianr@redhat.com>
Acked-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

tests/acceptance/virtiofs_submounts.py: fix setup of SSH pubkey

The public key argument should be a path to a file, and not the
public key data.

Reported-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210412044644.55083-12-crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Acceptance Tests: introduce CPU hotplug test

Even though there are qtest based tests for hotplugging CPUs (from
which this test took some inspiration from), this one adds checks
from a Linux guest point of view.

It should also serve as an example for tests that follow a similar
pattern and need to interact with QEMU (via qmp) and with the Linux
guest via SSH.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210412044644.55083-11-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Acceptance Tests: add basic documentation on LinuxTest base class

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210412044644.55083-10-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

tests/acceptance/virtiofs_submounts.py: remove launch_vm()

The LinuxTest class' launch_and_wait() method now behaves the same way
as this test's custom launch_vm(), so let's just use the upper layer
(common) method.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210412044644.55083-9-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Acceptance Tests: set up SSH connection by default after boot for LinuxTest

The LinuxTest specifically targets users that need to interact with Linux
guests.  So, it makes sense to give a connection by default, and avoid
requiring it as boiler-plate code.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210412044644.55083-8-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Acceptance Tests: make username/password configurable

This makes the username/password used for authentication configurable,
because some guest operating systems may have restrictions on accounts
to be used for logins, and it just makes it better documented.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210412044644.55083-7-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Acceptance Tests: add port redirection for ssh by default

For users of the LinuxTest class, let's set up the VM with the port
redirection for SSH, instead of requiring each test to set the same
arguments.

It also sets the network device, by default, to virtio-net.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210412044644.55083-6-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Acceptance Tests: move useful ssh methods to base class

Both the virtiofs submounts and the linux ssh mips malta tests
contains useful methods related to ssh that deserve to be made
available to other tests.  Let's move them to an auxiliary, mix-in
class that will be used on the base LinuxTest class.

The method that helps with setting up an ssh connection will now
support both key and password based authentication, defaulting to key
based.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210412044644.55083-5-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Python: add utility function for retrieving port redirection

Slightly different versions for the same utility code are currently
present on different locations.  This unifies them all, giving
preference to the version from virtiofs_submounts.py, because of the
last tweaks added to it.

While at it, this adds a "qemu.utils" module to host the utility
function and a test.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210412044644.55083-4-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
[Squashed in below fix. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210601154546.130870-2-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

tests/acceptance/virtiofs_submounts.py: evaluate string not length

If the vmlinuz variable is set to anything that evaluates to True,
then the respective arguments should be set.  If the variable contains
an empty string, than it will evaluate to False, and the extra
arguments will not be set.

This keeps the same logic, but improves readability a bit.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210412044644.55083-3-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

tests/acceptance/virtiofs_submounts.py: add missing accel tag

The tag is useful to select tests that depend/use a particular
feature.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210412044644.55083-2-crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Python: expose QEMUMachine's temporary directory

Each instance of qemu.machine.QEMUMachine currently has a "test
directory", which may not have any relation to a "test", and it's
really a temporary directory.

Users instantiating the QEMUMachine class will be able to set the
location of the directory that will *contain* the QEMUMachine unique
temporary directory, so that parameter name has been changed from
test_dir to base_temp_dir.

A property has been added to allow users to access it without using
private attributes, and with that, the directory is created on first
use of the property.

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210211220146.2525771-3-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210528-pull-request' into staging

usb: bugfixes for hid and xhci.

# gpg: Signature made Fri 28 May 2021 15:21:51 BST
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20210528-pull-request:
  hw/usb: hcd-xhci-pci: Fix spec violation of IP flag for MSI/MSI-X
  hw/usb: hcd-xhci-pci: Raise MSI/MSI-X interrupts only when told to
  hw/input/hid: Add support for keys of jp106 keyboard.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20210527-pull-request' into staging

virtio-gpu: add blob resource support.
vhost-user-gpu: security fixes.

# gpg: Signature made Thu 27 May 2021 15:23:25 BST
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20210527-pull-request: (23 commits)
  virtio-gpu: Update cursor data using blob
  virtio-gpu: Add virtio_gpu_set_scanout_blob
  virtio-gpu: Factor out update scanout
  virtio-gpu: Add helpers to create and destroy dmabuf objects
  ui/pixman: Add qemu_pixman_to_drm_format()
  virtio-gpu: Add virtio_gpu_resource_create_blob
  virtio-gpu: Add initial definitions for blob resources
  virtio-gpu: Refactor virtio_gpu_create_mapping_iov
  virtio-gpu: Refactor virtio_gpu_set_scanout
  virtio-gpu: Add virtio_gpu_find_check_resource
  stubs: Add stubs for udmabuf helpers
  virtio-gpu: Add udmabuf helpers
  headers: Add udmabuf.h
  ui: Get the fd associated with udmabuf driver
  hw/display/qxl: Set pci rom address aligned with page size
  vhost-user-gpu: abstract vg_cleanup_mapping_iov
  vhost-user-gpu: fix OOB write in 'virgl_cmd_get_capset' (CVE-2021-3546)
  vhost-user-gpu: fix memory leak in 'virgl_resource_attach_backing' (CVE-2021-3544)
  vhost-user-gpu: fix memory leak in 'virgl_cmd_resource_unref' (CVE-2021-3544)
  vhost-user-gpu: fix memory leak while calling 'vg_resource_unref' (CVE-2021-3544)
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Thu 27 May 2021 04:06:17 BST
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  tap-bsd: Remove special casing for older OpenBSD releases
  virtio-net: failover: add missing remove_migration_state_change_notifier()
  hw/net/imx_fec: return 0xffff when accessing non-existing PHY

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210526' into staging

Adjust types for some memory access functions.
Reduce inclusion of tcg headers.
Fix watchpoints vs replay.
Fix tcg/aarch64 roli expansion.
Introduce SysemuCPUOps structure.

# gpg: Signature made Thu 27 May 2021 00:43:54 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210526: (31 commits)
  hw/core: Constify TCGCPUOps
  target/mips: Fold jazz behaviour into mips_cpu_do_transaction_failed
  cpu: Move CPUClass::get_paging_enabled to SysemuCPUOps
  cpu: Move CPUClass::get_memory_mapping to SysemuCPUOps
  cpu: Move CPUClass::get_phys_page_debug to SysemuCPUOps
  cpu: Move CPUClass::asidx_from_attrs to SysemuCPUOps
  cpu: Move CPUClass::write_elf* to SysemuCPUOps
  cpu: Move CPUClass::get_crash_info to SysemuCPUOps
  cpu: Move CPUClass::virtio_is_big_endian to SysemuCPUOps
  cpu: Move CPUClass::vmsd to SysemuCPUOps
  cpu: Introduce SysemuCPUOps structure
  cpu: Move AVR target vmsd field from CPUClass to DeviceClass
  cpu: Rename CPUClass vmsd -> legacy_vmsd
  cpu: Assert DeviceClass::vmsd is NULL on user emulation
  cpu: Directly use get_memory_mapping() fallback handlers in place
  cpu: Directly use get_paging_enabled() fallback handlers in place
  cpu: Directly use cpu_write_elf*() fallback handlers in place
  cpu: Introduce cpu_virtio_is_big_endian()
  cpu: Un-inline cpu_get_phys_page_debug and cpu_asidx_from_attrs
  cpu: Split as cpu-common / cpu-sysemu
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/usb: hcd-xhci-pci: Fix spec violation of IP flag for MSI/MSI-X

Per xHCI spec v1.2 chapter 4.17.5 page 296:

  If MSI or MSI-X interrupts are enabled, Interrupt Pending (IP)
  shall be cleared automatically when the PCI dword write generated
  by the interrupt assertion is complete.

Currently QEMU does not clear the IP flag in the MSI / MSI-X mode.
This causes subsequent spurious interrupt to be delivered to guests.
To solve this, we change the xhci intr_raise() hook routine to have
a bool return value that is passed to its caller (the xhci core),
with true indicating that IP should be self-cleared.

Fixes: 62c6ae04cf43 ("xhci: Initial xHCI implementation")
Fixes: 4c47f800631a ("xhci: add msix support")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
[bmeng: move IP clear codes from xhci pci to xhci core]
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-2-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/usb: hcd-xhci-pci: Raise MSI/MSI-X interrupts only when told to

At present MSI / MSI-X interrupts are triggered regardless of the
irq level. We should have checked the level to determine whether
the interrupt needs to be delivered.

The level check logic was present in early versions of the xhci
model, but got dropped later by a rework of interrupt handling
under commit 4c4abe7cc903 ("xhci: rework interrupt handling").

Fixes: 4c4abe7cc903 ("xhci: rework interrupt handling")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-1-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/input/hid: Add support for keys of jp106 keyboard.

Add support for the following keys: KATAKANAHIRAGANA, HENKAN, MUHENKAN,
RO, and YEN.  Before this commit, these keys did not work as expected
when a jp106 keyboard was connected to the guest as a usb-kbd device.

Signed-off-by: Katsuhiro Ueno <uenobk@gmail.com>
Message-Id: <CA+pCdY3iG+pKKQqEVknnWF-W0wK36S4U1jxPvxmGAPp6FFvz1Q@mail.gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.1-pull-request' into staging

m68k pull request 20210526

implement m68k "any instruction" trace mode

# gpg: Signature made Wed 26 May 2021 20:56:58 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-6.1-pull-request:
  target/m68k: implement m68k "any instruction" trace mode
  target/m68k: introduce gen_singlestep_exception() function
  target/m68k: call gen_raise_exception() directly if single-stepping in gen_jmp_tb()
  target/m68k: introduce is_singlestepping() function

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/philmd/tags/gitlab-ci-20210527' into staging

GitLab CI patches queue

- Explode .gitlab-ci.yml in reusable templates
- Add job to cross build/test TCI on i386 host
- Remove CentOS 7 linux-user build job
- Temporarily set Avocado-based jobs in manual mode
- Increase time to hold Avocado reports to 1 week

# gpg: Signature made Thu 27 May 2021 15:40:58 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/gitlab-ci-20210527:
  gitlab: Convert check-dco/check-patch jobs to the 'rules' syntax
  gitlab: Use $CI_DEFAULT_BRANCH instead of hardcoded 'master'
  gitlab: Run Avocado tests manually (except mainstream CI)
  gitlab: Keep Avocado reports during 1 week
  gitlab: Extract cross-container jobs to container-cross.yml
  gitlab: Document how forks can use different set of jobs
  gitlab: Move current job set to qemu-project.yml
  gitlab: Extract all default build/test jobs to buildtest.yml
  gitlab: Drop linux user build job for CentOS 7
  gitlab: Extract core container jobs to container-core.yml
  gitlab: Extract default build/test jobs templates
  gitlab: Extract build stages to stages.yml
  gitlab: Extract DCO/style check jobs to static_checks.yml
  gitlab: Extract crossbuild job templates to crossbuild-template.yml
  gitlab: Extract container job template to container-template.yml
  gitlab: Enable cross-i386 builds of TCI
  gitlab: Rename ACCEL_CONFIGURE_OPTS to EXTRA_CONFIGURE_OPTS
  gitlab: Replace YAML anchors by extends (acceptance_test_job)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

gitlab: Convert check-dco/check-patch jobs to the 'rules' syntax

Per GitLab documentation [*]:

  "rules replaces only/except and they can’t be used together
   in the same job."

Since the 'rules' syntax is more powerful and we are already using
it, convert the check-dco/check-patch jobs so no job use the 'only/
except' syntax.

[*] https://docs.gitlab.com/ee/ci/yaml/#rules

Inspired-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525132418.4133235-3-f4bug@amsat.org>

gitlab: Use $CI_DEFAULT_BRANCH instead of hardcoded 'master'

We want to skip the checkpatch and DCO signoff jobs when
pushing to the default branch. Currently this branch is
called 'master', but we don't need to hardcode this in
the CI configuration, because the $CI_DEFAULT_BRANCH
env variable exposes it.

References:

- https://sfconservancy.org/news/2020/jun/23/gitbranchname/
- https://about.gitlab.com/blog/2021/03/10/new-git-default-branch-name/

Suggested-by: Savitoj Singh <savsingh@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210525153826.4174157-1-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>

gitlab: Run Avocado tests manually (except mainstream CI)

Due to a design problem and misunderstanding between the Avocado
framework and QEMU, Avocado is fetching many asset artifacts it
shouldn't be fetching, exhausting the jobs CI timeout.

Since Avocado artifacts are cached, this is not an issue with old
forks, which already have populated the cache and do not need to
download new artifacts to run the tests.

However this is very confusing to new contributors who start to
fork the project and keep having failing CI pipelines.

As a temporary kludge, add the QEMU_CI_AVOCADO_TESTING variable
to allow old forks to keep running the Avocado tests, while still
allowing new forks to use the mainstream set of CI tests.

Keep the tests enabled by default on the mainstream namespace
which is old enough to have a populated cache, hoping we will
keep this cache long enough until the Avocado/QEMU design issue
is fixed.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210525082556.4011380-9-f4bug@amsat.org>

gitlab: Keep Avocado reports during 1 week

Sometimes pull requests are merged during the week-end, triggering
a CI pipeline. Currently if such pipeline fails, the Avocado reports
are available for 2 days. For the reviewers working on the project
during office hours, the reports are already discarded when they
want to look at them. Increase this time to 1 week, which should
give reviewers enough time.

Only keep the reports on failure, which is the only case we'll
look at them.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525082556.4011380-8-f4bug@amsat.org>

gitlab: Extract cross-container jobs to container-cross.yml

Extract the jobs preparing the cross containers into a new file
(container-cross.yml).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210525082556.4011380-5-f4bug@amsat.org>

gitlab: Document how forks can use different set of jobs

Document how forks can use different set of jobs and add
a big warning so no new configuration is added to this
file.

Suggested-by: Daniel Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210525082556.4011380-4-f4bug@amsat.org>

gitlab: Move current job set to qemu-project.yml

To allow forks to easily decide which jobs they want to run,
but without disrupting the current default, move the current
set of jobs to a new file corresponding to the jobs run by
the mainstream project CI:
https://gitlab.com/qemu-project/qemu/-/pipelines

Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210511072952.2813358-11-f4bug@amsat.org>

gitlab: Extract all default build/test jobs to buildtest.yml

Extract the build/test jobs run by default on the mainstream
CI into a new file (buildtest.yml).

Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210511072952.2813358-9-f4bug@amsat.org>

gitlab: Drop linux user build job for CentOS 7

It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target.

The build-user-centos7 job was to detect a failure specific to CentOS
7 and there are already other linux user jobs for other platforms.
Thus we can drop this job rather than move it to CentOS 8.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210514120415.1368922-2-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

gitlab: Extract core container jobs to container-core.yml

It is not possible to use the previously extracted templates
without this set of core containers. Extract them into a new
file (container-core.yml) to be able to build them without
having to build all the other containers by default.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab: Extract default build/test jobs templates

To be able to reuse the mainstream build/test jobs templates,
extract them into a new file (buildtest-template.yml).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-8-f4bug@amsat.org>
[thuth: Keep the "acceptance_test_job_template" name for now]
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab: Extract build stages to stages.yml

Extract the build stages used by our job templates to a new file
(stages.yml) to be able to include it with the other templates,
without having to run all the jobs included in the default
.gitlab-ci.yml, which are mainly useful for mainstream CI.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-7-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab: Extract DCO/style check jobs to static_checks.yml

Extract the DCO / checkpatch jobs to a new file (static_checks.yml)
to be able to run them without having to run all the jobs included
in the default .gitlab-ci.yml, which are mainly useful for the
mainstream CI.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-6-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab: Extract crossbuild job templates to crossbuild-template.yml

Extract the crossbuild job templates to a new file
(crossbuild-template.yml) to be able to reuse them
without having to run all the jobs included, which
are mainly useful for mainstream CI.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-5-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab: Extract container job template to container-template.yml

Extract the container job template to a new file
(container-template.yml) to be able to reuse it
without having to run all the jobs included, which
are mainly useful for mainstream CI.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-4-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab: Enable cross-i386 builds of TCI

We're currently only testing TCI with a 64-bit host -- also test
with a 32-bit host.  Enable a selection of softmmu and user-only
targets, 32-bit LE, 64-bit LE, 32-bit BE, as there are ifdefs for each.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210502235727.1979457-27-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

gitlab: Rename ACCEL_CONFIGURE_OPTS to EXTRA_CONFIGURE_OPTS

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210502235727.1979457-26-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

gitlab: Replace YAML anchors by extends (acceptance_test_job)

'extends' is an alternative to using YAML anchors
and is a little more flexible and readable. See:
https://docs.gitlab.com/ee/ci/yaml/#extends

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210519185504.2198573-2-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210526a' into staging

Virtiofs, migration and hmp pull 2021-05-26

Fixes for a loadvm regression from Kevin,
some virtiofsd cleanups from Vivek and Mahmoud, and
some RDMA migration fixups from Li.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 26 May 2021 18:43:30 BST
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20210526a:
  migration/rdma: source: poll cm_event from return path
  migration/rdma: destination: create the return patch after the first accept
  migration/rdma: Fix rdma_addrinfo res leaks
  migration/rdma: cleanup rdma in rdma_start_incoming_migration error path
  migration/rdma: Fix cm_event used before being initialized
  tools/virtiofsd/fuse_opt.c: Replaced a malloc with GLib's g_try_malloc
  tools/virtiofsd/buffer.c: replaced a calloc call with GLib's g_try_new0
  virtiofsd: Set req->reply_sent right after sending reply
  virtiofsd: Check EOF before short read
  virtiofsd: Simplify skip byte logic
  virtiofsd: get rid of in_sg_left variable
  virtiofsd: Use iov_discard_front() to skip bytes
  virtiofsd: Get rid of unreachable code in read
  virtiofsd: Check for EINTR in preadv() and retry
  hmp: Fix loadvm to resume the VM on success instead of failure

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

virtio-gpu: Update cursor data using blob

If a blob is available for the cursor, copy the data from the blob.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-15-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Add virtio_gpu_set_scanout_blob

This API allows Qemu to set the blob allocated by the Guest as
the scanout buffer. If Opengl support is available, then the
scanout buffer would be submitted as a dmabuf to the UI; if not,
a pixman image is created from the scanout buffer and is
submitted to the UI via the display surface.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-14-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Factor out update scanout

Creating a small helper function for updating the scanout
will be useful in the next patch where this needs to be
done early in do_set_scanout before returning.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-13-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Add helpers to create and destroy dmabuf objects

These helpers can be useful for creating dmabuf objects from blobs
and submitting them to the UI.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-12-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ui/pixman: Add qemu_pixman_to_drm_format()

This new function to get the drm_format associated with a pixman
format will be useful while creating a dmabuf.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-11-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Add virtio_gpu_resource_create_blob

This API allows Qemu to register the blob allocated by the Guest
as a new resource and map its backing storage.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-10-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Add initial definitions for blob resources

Add the property bit, configuration flag and other relevant
macros and definitions associated with this feature.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-9-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Refactor virtio_gpu_create_mapping_iov

Instead of passing the attach_backing object to extract nr_entries
and offset, explicitly pass these as arguments to this function.
This will be helpful when adding create_blob API.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-8-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Refactor virtio_gpu_set_scanout

Store the meta-data associated with a FB in a new object
(struct virtio_gpu_framebuffer) and pass the object to set_scanout.
Also move code in set_scanout into a do_set_scanout function.
This will be helpful when adding set_scanout_blob API.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-7-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Add virtio_gpu_find_check_resource

Move finding the resource and validating its backing storage into one
function.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-6-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

stubs: Add stubs for udmabuf helpers

This is needed to ensure that virtio-gpu device works for
non-linux builds.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-5-vivek.kasireddy@intel.com>

[ kraxel: add virtio-gpu-udmabuf.c stubs only when building
          system emulation ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio-gpu: Add udmabuf helpers

Add helper functions to create a dmabuf for a resource and mmap it.
Also, introduce the fields blob and blob_size so that these helpers
can start to use them but the full picture will emerge only after
adding create_blob API in patch 8 of this series.

To be able to create a dmabuf using the udmabuf driver, Qemu needs
to be lauched with the memfd memory backend like this:

qemu-system-x86_64 -m 8192m -object memory-backend-memfd,id=mem1,size=8192M
-machine memory-backend=mem1

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-4-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

headers: Add udmabuf.h

This adds udmabuf header to standard headers so that the
relevant udmabuf objects can be accessed in subsequent
patches.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-3-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ui: Get the fd associated with udmabuf driver

Try to open the udmabuf dev node for the first time or return the
fd if the device was previously opened.

Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-2-vivek.kasireddy@intel.com>

[ kraxel: fixup fcntl.h include ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/display/qxl: Set pci rom address aligned with page size

On some MIPS system, page size is 16K, and qxl vga device can
be used for VM in kvm mode. Qxl pci rom size is set 8K fixed,
smaller than 16K page size on host system, it fails to be
added into memslots in kvm mode where memory_size and GPA
are required to align with page size.

This patch fixes this issue.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <1621340448-31617-1-git-send-email-maobibo@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vhost-user-gpu: abstract vg_cleanup_mapping_iov

Currently in vhost-user-gpu, we free resource directly in
the cleanup case of resource. If we change the cleanup logic
we need to change several places, also abstruct a
'vg_create_mapping_iov' can be symmetry with the
'vg_create_mapping_iov'. This is like what virtio-gpu does,
no function changed.

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210516030403.107723-9-liq3ea@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vhost-user-gpu: fix OOB write in 'virgl_cmd_get_capset' (CVE-2021-3546)

If 'virgl_cmd_get_capset' set 'max_size' to 0,
the 'virgl_renderer_fill_caps' will write the data after the 'resp'.
This patch avoid this by checking the returned 'max_size'.

virtio-gpu fix: abd7f08b23 ("display: virtio-gpu-3d: check
virgl capabilities max_size")

Fixes: CVE-2021-3546
Reported-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210516030403.107723-8-liq3ea@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vhost-user-gpu: fix memory leak in 'virgl_resource_attach_backing' (CVE-2021-3544)

If 'virgl_renderer_resource_attach_iov' failed, the 'res_iovs' will
be leaked.

Fixes: CVE-2021-3544
Reported-by: Li Qiang <liq3ea@163.com>
virtio-gpu fix: 33243031da ("virtio-gpu-3d: fix memory leak
in resource attach backing")

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210516030403.107723-7-liq3ea@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vhost-user-gpu: fix memory leak in 'virgl_cmd_resource_unref' (CVE-2021-3544)

The 'res->iov' will be leaked if the guest trigger following sequences:

virgl_cmd_create_resource_2d
virgl_resource_attach_backing
virgl_cmd_resource_unref

This patch fixes this.

Fixes: CVE-2021-3544
Reported-by: Li Qiang <liq3ea@163.com>
virtio-gpu fix: 5e8e3c4c75 ("virtio-gpu: fix resource leak
in virgl_cmd_resource_unref"

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210516030403.107723-6-liq3ea@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vhost-user-gpu: fix memory leak while calling 'vg_resource_unref' (CVE-2021-3544)

If the guest trigger following sequences, the attach_backing will be leaked:

vg_resource_create_2d
vg_resource_attach_backing
vg_resource_unref

This patch fix this by freeing 'res->iov' in vg_resource_destroy.

Fixes: CVE-2021-3544
Reported-by: Li Qiang <liq3ea@163.com>
virtio-gpu fix: 5e8e3c4c75 ("virtio-gpu: fix resource leak
in virgl_cmd_resource_unref")

Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210516030403.107723-5-liq3ea@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vhost-user-gpu: fix memory leak in vg_resource_attach_backing (CVE-2021-3544)

Check whether the 'res' has already been attach_backing to avoid
memory leak.

Fixes: CVE-2021-3544
Reported-by: Li Qiang <liq3ea@163.com>
virtio-gpu fix: 204f01b309 ("virtio-gpu: fix memory leak
in resource attach backing")

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210516030403.107723-4-liq3ea@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vhost-user-gpu: fix resource leak in 'vg_resource_create_2d' (CVE-2021-3544)

Call 'vugbm_buffer_destroy' in error path to avoid resource leak.

Fixes: CVE-2021-3544
Reported-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210516030403.107723-3-liq3ea@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vhost-user-gpu: fix memory disclosure in virgl_cmd_get_capset_info (CVE-2021-3545)

Otherwise some of the 'resp' will be leaked to guest.

Fixes: CVE-2021-3545
Reported-by: Li Qiang <liq3ea@163.com>
virtio-gpu fix: 42a8dadc74 ("virtio-gpu: fix information leak
in getting capset info dispatch")

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210516030403.107723-2-liq3ea@163.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

tap-bsd: Remove special casing for older OpenBSD releases

OpenBSD added support for tap(4) 10 releases ago.

Remove the special casing for older releases.

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

virtio-net: failover: add missing remove_migration_state_change_notifier()

In the failover case configuration, virtio_net_device_realize() uses an
add_migration_state_change_notifier() to add a state notifier, but this
notifier is not removed by the unrealize function when the virtio-net
card is unplugged.

If the card is unplugged and a migration is started, the notifier is
called and as it is not valid anymore QEMU crashes.

This patch fixes the problem by adding the
remove_migration_state_change_notifier() in virtio_net_device_unrealize().

The problem can be reproduced with:

  $ qemu-system-x86_64 -enable-kvm -m 1g -M q35 \
    -device pcie-root-port,slot=4,id=root1 \
    -device pcie-root-port,slot=5,id=root2 \
    -device virtio-net-pci,id=net1,mac=52:54:00:6f:55:cc,failover=on,bus=root1 \
    -monitor stdio disk.qcow2
  (qemu) device_del net1
  (qemu) migrate "exec:gzip -c > STATEFILE.gz"

  Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
  0x0000000000000000 in ?? ()
  (gdb) bt
  #0  0x0000000000000000 in  ()
  #1  0x0000555555d726d7 in notifier_list_notify (...)
      at .../util/notify.c:39
  #2  0x0000555555842c1a in migrate_fd_connect (...)
      at .../migration/migration.c:3975
  #3  0x0000555555950f7d in migration_channel_connect (...)
      error@entry=0x0) at .../migration/channel.c:107
  #4  0x0000555555910922 in exec_start_outgoing_migration (...)
      at .../migration/exec.c:42

Reported-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hw/net/imx_fec: return 0xffff when accessing non-existing PHY

If a PHY does not exist, attempts to read from it should return 0xffff.
Otherwise the Linux kernel will believe that a PHY is there and select
the non-existing PHY. This in turn will result in network errors later
on since the real PHY is not selected or configured.

Since reading from or writing to a non-existing PHY is not an emulation
error, replace guest error messages with traces.

Fixes: 461c51ad4275 ("Add a phy-num property to the i.MX FEC emulator")
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hw/core: Constify TCGCPUOps

We no longer have any runtime modifications to this struct,
so declare them all const.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>

target/mips: Fold jazz behaviour into mips_cpu_do_transaction_failed

Add a flag to MIPSCPUClass in order to avoid needing to
replace mips_tcg_ops.do_transaction_failed.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-2-richard.henderson@linaro.org>

cpu: Move CPUClass::get_paging_enabled to SysemuCPUOps

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-23-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Move CPUClass::get_memory_mapping to SysemuCPUOps

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-22-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Move CPUClass::get_phys_page_debug to SysemuCPUOps

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Move CPUClass::asidx_from_attrs to SysemuCPUOps

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-20-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Move CPUClass::write_elf* to SysemuCPUOps

The write_elf*() handlers are used to dump vmcore images.
This feature is only meaningful for system emulation.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-19-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpu: Move CPUClass::get_crash_info to SysemuCPUOps

cpu_get_crash_info() is called on GUEST_PANICKED events,
which only occur in system emulation.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-18-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>