hw/ppc/pnv: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length
array on the stack.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20220819153931.3147384-7-peter.maydell@linaro.org

hw/net/e1000e_core: Use definition to avoid dynamic stack allocation

The compiler isn't clever enough to figure 'min_buf_size'
is a constant, so help it by using a definitions instead.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-6-peter.maydell@linaro.org

io/channel-websock: Replace strlen(const_str) by sizeof(const_str) - 1

The combined_key[... QIO_CHANNEL_WEBSOCK_GUID_LEN ...] array in
qio_channel_websock_handshake_send_res_ok() expands to a call
to strlen(QIO_CHANNEL_WEBSOCK_GUID), and the compiler doesn't
realize the string is const, so consider combined_key[] being
a variable-length array.

To remove the variable-length array, we provide it a hint to
the compiler by using sizeof() - 1 instead of strlen().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-5-peter.maydell@linaro.org

chardev/baum: Avoid dynamic stack allocation

Use autofree heap allocation instead of variable-length
array on the stack.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-4-peter.maydell@linaro.org

chardev/baum: Use definitions to avoid dynamic stack allocation

We know 'x * y' will be at most 'X_MAX * Y_MAX' (which is not
a big value, it is actually 84). Instead of having the compiler
use variable-length array, declare an array able to hold the
maximum 'x * y'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-3-peter.maydell@linaro.org

chardev/baum: Replace magic values by X_MAX / Y_MAX definitions

Replace '84' magic value by the X_MAX definition, and '1' by Y_MAX.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-2-peter.maydell@linaro.org

hw/net/lan9118: Signal TSFL_INT flag when TX FIFO reaches specified level

The LAN9118 allows the guest to specify a level for both the TX and
RX FIFOs at which an interrupt will be generated.  We implement the
RSFL_INT interrupt for the RX FIFO but are missing the handling of
the equivalent TSFL_INT for the TX FIFO.  Add the missing test to set
the interrupt if the TX FIFO has exceeded the guest-specified level.

This flag is required for Micrium lan911x ethernet driver to work.

Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
[PMM: Tweaked commit message and comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/acpi: Add ospm_status hook implementation for acpi-ged

Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status"
causes segmentation fault with following dumpstack:
 #1  0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312
 #2  0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63
 #3  0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128
 #4  0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150
 #5  aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178
 #6  0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421
 #7  0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320
 #8  0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0
 #9  0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297
 #10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320
 #11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596
 #12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734
 #13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38
 #14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47

Fixes: ebb62075021a ("hw/acpi: Add ACPI Generic Event Device Support")
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220816094957.31700-1-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to get_phys_addr_pmsav5

Remove the use of regime_is_secure from get_phys_addr_pmsav5.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add secure parameter to get_phys_addr_pmsav7

Remove the use of regime_is_secure from get_phys_addr_pmsav7,
using the new parameter instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-19-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to pmsav7_use_background_region

Remove the use of regime_is_secure from pmsav7_use_background_region,
using the new parameter instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add secure parameter to get_phys_addr_pmsav8

Remove the use of regime_is_secure from get_phys_addr_pmsav8.
Since we already had a local variable named secure, use that.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to get_phys_addr_v6

Remove the use of regime_is_secure from get_phys_addr_v6,
passing the new parameter to the lookup instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to get_phys_addr_v5

Remove the use of regime_is_secure from get_phys_addr_v5,
passing the new parameter to the lookup instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Folded in definition of local is_secure in get_phys_addr(),
 since I dropped the earlier patch that would have provided it]
Message-id: 20220822152741.1617527-14-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add secure parameter to pmsav8_mpu_lookup

Remove the use of regime_is_secure from pmsav8_mpu_lookup,
passing the new parameter to the lookup instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add is_secure parameter to v8m_security_lookup

Remove the use of regime_is_secure from v8m_security_lookup,
passing the new parameter to the lookup instead.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Remove is_subpage argument to pmsav8_mpu_lookup

This can be made redundant with result->page_size, by moving the basic
set of page_size from get_phys_addr_pmsav8.  We still need to overwrite
page_size when v8m_security_lookup signals a subpage.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-11-richard.henderson@linaro.org
[PMM: Update a comment that used to refer to is_subpage]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in pmsav8_mpu_lookup

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav8

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav7

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav5

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_v5

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_v6

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use GetPhysAddrResult in get_phys_addr_lpae

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Create GetPhysAddrResult

Combine 5 output pointer arguments from get_phys_addr
into a single struct.  Adjust all callers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220822152741.1617527-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix alignment for VLD4.32

When requested, the alignment for VLD4.32 is 8 and not 16.

See ARM documentation about VLD4 encoding:
    ebytes = 1 << UInt(size);
    if size == '10' then
        alignment = if a == '0' then 1 else 8;
    else
        alignment = if a == '0' then 1 else 4*ebytes;

Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220914105058.2787404-1-chigot@adacore.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/net/can: fix Xilinx ZynqMP CAN RX FIFO logic

For consistency, function "update_rx_fifo()" should use the RX FIFO
register field names, not the TX FIFO ones, even if they refer to the
same bit positions in the register.

Signed-off-by: Anton Kochkov <anton.kochkov@proton.me>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220817141754.2105981-1-anton.kochkov@proton.me
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1123
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'm68k-for-7.2-pull-request' of https://github.com/vivier/qemu-m68k into staging

m68k pull request 20220921

- several fixes for SR
- implement TAS
- feature cleanup

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmMrMx0SHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748UB0P/1w5w+ogpcWVp9uBPE9m6lTT8sTricWD
# oGMIEG0kgpS3xTp7pZ/WeCp38IShFBfBcz5aypvR5nS/1aclyJnzGsCqyWdBe9c4
# jJJY5r7JKP2aKcolGNilNyd20ldOiaxZGe6yFLJDWi2spFbRx3iiRJ4/2NXF5Xi8
# TlHKdlDGlNLFiFNtBXMMwqvL77qJ8LH/aE4cAr8JTOb1VszKXrFxqEqxoUucRirB
# u0LbM+DP3u2xXjTGLMLlMcKf9X2BXwuWBSAXslB8xWmRlX+B6fMudBFglTgbu0Cc
# bpoBBqY4s3QYPb21i89osYevJAJSdrtEzkKus3xAI08ACSffb9k9m/naVJJDSSNC
# HZeKVbAd7I0Xw2xzzO5yQB+7rdfgoL1miE1rs936WKHi0WWHZpdJqzl/3G3ZPhRz
# NmqczF9rRR9B9SabXx5lWlhK+Ys/W7PzY+R4gc6ose0wF4T70qmVF3EoioP1c5Y8
# 6OonMpRu6L5sW5KM3IUmkBo3KcnLezlxtebfaDyaKC9tB0qg4aM14ikL36nsLFbh
# 2nGExYSyMJ6U4tqpxyQxijMMSQG20vyVIup6cUsrSD+rGmbSuWZWJwsTmaAw2W6k
# 6HtDgtFk40ZB1WttYupQBa/LgjshGLl28jyLI9nNEdFYb4H1JAallEERF/tb6AUD
# WEiu8vcUMYEp
# =IAMt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 21 Sep 2022 11:51:57 EDT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* tag 'm68k-for-7.2-pull-request' of https://github.com/vivier/qemu-m68k:
  target/m68k: always call gen_exit_tb() after writes to SR
  target/m68k: rename M68K_FEATURE_M68000 to M68K_FEATURE_M68K
  target/m68k: Perform writback before modifying SR
  target/m68k: Fix MACSR to CCR
  target/m68k: Implement atomic test-and-set

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu into staging

ppc patch queue for 2022-09-20:

This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
# ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
# a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
# =qT+H
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 15:37:56 EDT
# gpg:                using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28  3819 3CD9 CA96 DE03 3164

* tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu:
  hw/ppc/spapr: Fix code style problems reported by checkpatch
  hw/pci-host: pnv_phb{3, 4}: Fix heap out-of-bound access failure
  hw/ppc: spapr: Use qemu_vfree() to free spapr->htab
  target/ppc: Clear fpstatus flags on helpers missing it
  target/ppc: Zero second doubleword of VSR registers for FPR insns
  target/ppc: Set OV32 when OV is set
  target/ppc: Zero second doubleword for VSX madd instructions
  target/ppc: Set result to QNaN for DENBCD when VXCVI occurs
  target/ppc: Zero second doubleword in DFP instructions
  target/ppc: Remove unused xer_* macros
  target/ppc: Remove extra space from s128 field in ppc_vsr_t
  target/ppc: Merge fsqrt and fsqrts helpers
  target/ppc: Move fsqrts to decodetree
  target/ppc: Move fsqrt to decodetree
  target/ppc: Implement hashstp and hashchkp
  target/ppc: Implement hashst and hashchk
  target/ppc: Add HASHKEYR and HASHPKEYR SPRs

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-testing-next-200922-2' of https://github.com/stsquad/qemu into staging

Testing and CI changes:

  - reduce number of targets for cross_user_build
  - update avocado xlnx_versal test with new binaries
  - add explicit timeouts to a number of avocado TCG tests
  - reduce default timeout to 120s
  - update lcitool to support cross-amd64
  - flatten a number of docker cross containers
  - clean up stale qemu/debian10 dependencies
  - remove obsolete Fedora VM test
  - add configure workaround for meson --disable-pie bug
  - disable --static-pie for aarch64 gitlab runner
  - update aarch32/aarch64 jobs to 22.04
  - deprecate 32 bit big-endian MIPS as a host
  - remove FROM qemu/ support from docker.py
  - remove Debian base images now everything is flat

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmMp8Q8ACgkQ+9DbCVqe
# KkQmlwf/awT+jOmAW7TjlQnUTgHJ2hyOo7EViY/nmRkPOCT3ZG32pWFHBorHPX7s
# BeqZzpzCvhzaIfObnjIssx13C5QId5XjJGuTgMAnSsGhzTrp7VUJc1/bBfHcD9L2
# dJJduG+bfAkh95heBkry5EhFt2ZMui5yv9DjEH44hUUc9nwKtIQGts3H3fnVqzvv
# rzLZ7c2lhdLpAxHjmjSiiD8H59lJ+DpoziaobW4D7teGgecnyGVvJ9m1YH4Rc+kM
# gpLTOGMhADkQlysf5e5cvxXSJbP7YpXYrsr9X+DfEy5PMt2L3y4Yv0wiAz9ClYvm
# obD4wMQS5echYvb77qS1G8A0VMEPqA==
# =3oYu
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 12:57:51 EDT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* tag 'pull-testing-next-200922-2' of https://github.com/stsquad/qemu: (30 commits)
  tests/docker: remove the Debian base images
  tests/docker: remove FROM qemu/ support from docker.py
  tests/docker: update and flatten debian-toolchain
  tests/docker: update and flatten debian-hexagon-cross
  tests/docker: update and flatten debian-loongarch-cross
  tests/docker: update and flatten debian-amd64-cross
  tests/lcitool: bump to latest version
  tests/docker: update and flatten debian-all-test-cross
  tests/docker: flatten debian-riscv64-test-cross
  Deprecate 32 bit big-endian MIPS
  gitlab-ci: update aarch32/aarch64 custom runner jobs
  gitlab-ci/custom-runners: Disable -static-pie for ubuntu-20.04-aarch64
  configure: explicitly set cflags for --disable-pie
  tests/vm: Remove obsolete Fedora VM test
  tests/docker: remove amd64 qemu/debian10 dependency
  tests/docker: remove tricore qemu/debian10 dependency
  tests/docker: flatten debian-powerpc-test-cross
  tests/docker: update and flatten debian-sparc64-cross
  tests/docker: update and flatten debian-sh4-cross
  tests/docker: update and flatten debian-mips64-cross
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

target/m68k: always call gen_exit_tb() after writes to SR

Any write to SR can change the security state so always call gen_exit_tb() when
this occurs. In particular MacOS makes use of andiw/oriw in a few places to
handle the switch between user and supervisor mode.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220917112515.83905-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: rename M68K_FEATURE_M68000 to M68K_FEATURE_M68K

The M68K_FEATURE_M68000 feature is misleading in that its name suggests the feature
is defined just for Motorola 68000 CPUs, whilst in fact it is defined for all
Motorola 680X0 CPUs.

In order to avoid confusion with the other M68K_FEATURE_M680X0 constants which
define the features available for specific Motorola CPU models, rename
M68K_FEATURE_M68000 to M68K_FEATURE_M68K and add comments to clarify its usage.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220917112515.83905-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Perform writback before modifying SR

Writes to SR may change security state, which may involve
a swap of %ssp with %usp as reflected in %a7.  Finish the
writeback of %sp@+ before swapping stack pointers.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1206
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220913142818.7802-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Fix MACSR to CCR

First, we were writing to the entire SR register, instead
of only the flags portion.  Second, we were not clearing C
as per the documentation (X was cleared via the 0xf mask).

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220913142818.7802-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Implement atomic test-and-set

This is slightly more complicated than cas,
because tas is allowed on data registers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829051746.227094-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge tag 'pull-request-2022-09-20' of https://gitlab.com/thuth/qemu into staging

* Skip tests if the corresponding feature is missing
* Update NetBSD VM test to version 9.3
* Update the FreeBSD CI to version 13.1
* Some small fixes for the qtests
* Update wordings in the QEMU guest-agent

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmMpvqURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXtaQ//ap4P8Gdg7HyShflpHj3+Z+UC/THtcCAD
# F5Oj/E89wYJZJvWpjELLUf+218O+zbcKkv6z25AHo37JRSLQMzsD21RpDYcu8qnN
# Xk77KrOLFaVRRo6e3FAi5I+uWsm1h/9jJfC/sFrzfKGnWcW5pTzXUkbvWT3LZo/q
# d0wJCMn/+h0j6kqhjm8mhFCsGsSaUKFCMzm/6rsWxVsMsVnlTyYhg/IzhocKrkVD
# 9ZWz+jAv+h4F0CLl/SeRvZFq4LEGZoP3KHWrDAgEO9i1yC+tNpGDFyV/hJXwapcm
# jYGaPPgS2dLToMXf5uubfmyptircQKqdpC2Hl8UwgUS6OgwA2YRCxad8rrrdBezq
# 2Nb8KissVB8ySL1Asf00gxioJNwLKrY+4NIeDVxAQ56f1/9kd0w0ylrweR492V/p
# z3Yrs3uqqALR1jWfB7/Rh4EN2R0oe6bnlfb8bB6lzPKynXQicZLeoOnNPbkOQMw8
# HgjKVFT130ydXJKMJkgEQmi4JUGoaKqSKCmlSaHz9TAobwNiVBXaH0cyuX5QEuoX
# WgZosiF5nBzdbhkC2IPcQYHzIIkelfx9j9mKE0PNfUSkFgMiywcI5TfqabPWGeaA
# rxYPU4EZmbgCZPlBVdPFwog/BXap2EIo9+xtINM0COQDoy+Q/l5Z3keHhpjayBBS
# qWc6CRSmhLs=
# =sHK+
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 09:22:45 EDT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2022-09-20' of https://gitlab.com/thuth/qemu:
  qga: Replace 'blacklist' and 'whitelist' in the guest agent sources
  qga: Replace 'blacklist' command line and config file options by 'block-rpcs'
  gitlab-ci: Update the FreeBSD 13 job from 13.0 to 13.1
  tests: sb16 has both pc and q35 tests
  tests: Only run intel-hda-tests if machine type is compiled in
  bios-tables-test: Only run test for machine types compiled in
  bios-tables-test: Sort all x86_64 tests by machine type
  bios-tables-test: Make oem-fields tests be consistent
  meson-build: Enable CONFIG_REPLICATION only when replication is set
  tests: Fix error strings
  qtest/fuzz-lsi53c895a-test: set guest RAM to 2G
  tests/qtest: npcm7xx-emc-test: Skip checking MAC
  .gitlab-ci.d/windows.yml: Drop the sed processing in the 64-bit build
  tests/vm: update NetBSD to 9.3
  tests: mark io-command test as skipped if socat is missing

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* add help option for -audio and -audiodev
* another missing memory barrier for dirty pages
* target/i386: Raise #GP on unaligned m128 accesses
* coverity fixes + improvements to components
* add MMX and 3DNow! tests
* SSE4a fixes
* target/i386: TCG translation cleanups
* update qboot submodule

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmMocZcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNV7Qf+NEoB8R0ug+ClMRe1Qqt8FXEd0eXE
# nT19q4rOWfmW4/L+wI6gpxhbxrxOuLwoZ8YvD8c6rQAdexMoHoeTvA1PAca4zZTo
# ISmW3bXsoHN2uGLPz4CKhjKBLCANtDkh3EWCwRFkLSRCLSRDhKPrG1Ue3fOgQ6GO
# riROcxbyYzvU/4uefSW+xG/Im9gftNF6occZZ59LrK7Xd8kwlb+E+EdsmzFw5f8O
# Q9irVQ8pX9ZM4BK2KiT16nZ0uSRwJqSJKbLI670nUEsj1jQCIgU3srgZHjAIvoir
# yivDs6oktgS/HkPD5CQoTX+fVDgEDM1TTF6P8r7uJopPXpzz+AHswfSJmg==
# =RVCS
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 19 Sep 2022 09:41:43 EDT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
  qboot: update to latest submodule
  build: remove extra parentheses causing missing rebuilds
  target/i386: introduce insn_get_addr
  target/i386: REPZ and REPNZ are mutually exclusive
  target/i386: fix INSERTQ implementation
  target/i386: correctly mask SSE4a bit indices in register operands
  audio: add help option for -audio and -audiodev
  tests/tcg: remove old SSE tests
  tests/tcg: refine MMX support in SSE tests
  tests/tcg: i386: add MMX and 3DNow! tests
  tests/tcg: i386: fix typos in 3DNow! instructions
  tests: unit: add NULL-pointer check
  tests: test-qga: close socket on failure to connect
  tests: unit: simplify test-visitor-serialization list tests
  smbios: sanitize type from external type before checking have_fields_bitmap
  coverity: put NUBus under m68k component
  coverity: add new RISC-V component
  spapr_pci: fix leak in spapr_phb_vfio_get_loc_code
  kvm: fix memory leak on failure to read stats descriptors
  target/i386: Raise #GP on unaligned m128 accesses when required.
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge tag 'pull-loongarch-20220920' of https://gitlab.com/gaosong/qemu into staging

v2: fix compile error.

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCYymK3wAKCRBAov/yOSY+
# 31trA/oDy6CHaPvT9mwKOM/ScYcwCf+dEtFGkqpsjcPlEB7GLJ9moJxp1xlm+Htw
# KA0MlA4QrI6MWd9udEbnoB7aRScG/ugzWHDPGocg+qjqiZvmHpE9ShdxYeDVJaLk
# 6hN9dkom+ANWeZ7T4gmdQreK/lwjUAqkiPSjw1HhvSHr3kAeDA==
# =uUxe
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 05:41:51 EDT
# gpg:                using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Can't check signature: No public key

* tag 'pull-loongarch-20220920' of https://gitlab.com/gaosong/qemu:
  hw/loongarch: Improve acpi dsdt table
  hw/loongarch: Support memory hotplug
  hw/loongarch: Fix acpi ged irq number in dsdt table
  hw/loongarch: Add RAMFB to dynamic_sysbus_devices list
  hw/loongarch: Add hotplug handler for machine
  hw/loongarch: Add platform bus support
  hw/loongarch: Add interrupt information to FDT table
  hw/loongarch: Support fw_cfg dma function
  hw/loongarch: Remove vga device when loongarch init

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

tests/docker: remove the Debian base images

We no longer use these in any of our images. Clean-up the remaining
comments and documentation that reference them and remove from the
build.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-31-alex.bennee@linaro.org>

tests/docker: remove FROM qemu/ support from docker.py

We want to migrate from docker.py to building our images directly with
docker/podman. Before we get there we need to make sure we don't
re-introduce our layered builds so bug out if we see FROM qemu/ in a
Dockerfile.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-30-alex.bennee@linaro.org>

tests/docker: update and flatten debian-toolchain

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile as we do not need anything from the base image to
build the toolchain. This is used to build both the nios and
microblaze toolchains.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-29-alex.bennee@linaro.org>

tests/docker: update and flatten debian-hexagon-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile as we do not some of the extraneous packages from
the base image to build the toolchain.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-28-alex.bennee@linaro.org>

tests/docker: update and flatten debian-loongarch-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from the
QEMU base image just to compile test images. In this case it is a
binary distribution of the toolchain anyway.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-27-alex.bennee@linaro.org>

tests/docker: update and flatten debian-amd64-cross

Now lcitool has support for building a x86_64 cross image we can use
it for this.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-26-alex.bennee@linaro.org>

tests/lcitool: bump to latest version

We need this to be able to cleanly build the x86 cross images. There
are a few minor updates triggered by lcitool-refresh including adding
"libslirp" to the freebsd vars and opensuse-leap which will help when
we finally drop the slirp submodule from QEMU.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-25-alex.bennee@linaro.org>

tests/docker: update and flatten debian-all-test-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We also need to ensure we install clang as it is
used for those builds as well.

It would be nice to port this to lcitool but for now this will do.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-24-alex.bennee@linaro.org>

tests/docker: flatten debian-riscv64-test-cross

Flatten into a single dockerfile and update to match the rest of the
test cross compile dockerfiles.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-23-alex.bennee@linaro.org>

Deprecate 32 bit big-endian MIPS

It's becoming harder to maintain a cross-compiler to test this host
architecture as the old stable Debian 10 ("Buster") moved into LTS
which supports fewer architectures. For now:

  - mark it's deprecation in the docs
  - downgrade the containers to build TCG tests only
  - drop the cross builds from our CI

Users with an appropriate toolchain and user-space can still take
their chances building it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-22-alex.bennee@linaro.org>

gitlab-ci: update aarch32/aarch64 custom runner jobs

The custom runner is now using 22.04 so we can drop our hacks to deal
with broken libssh and glusterfs. The provisioning scripts will be
updated in a separate commit.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-21-alex.bennee@linaro.org>

gitlab-ci/custom-runners: Disable -static-pie for ubuntu-20.04-aarch64

The project has reached the magic size at which we see

/usr/aarch64-linux-gnu/lib/libc.a(init-first.o): in function `__libc_init_first':
(.text+0x10): relocation truncated to fit: R_AARCH64_LD64_GOTPAGE_LO15 against \
symbol `__environ' defined in .bss section in /usr/aarch64-linux-gnu/lib/libc.a(environ.o)
/usr/bin/ld: (.text+0x10): warning: too many GOT entries for -fpic, please recompile with -fPIC

The bug has been reported upstream, but in the meantime there is
nothing we can do except build a non-pie executable.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220823210329.1969895-1-richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-20-alex.bennee@linaro.org>

configure: explicitly set cflags for --disable-pie

This is working around current limitation of Meson's handling of
--disable-pie.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-19-alex.bennee@linaro.org>

hw/ppc/spapr: Fix code style problems reported by checkpatch

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20220919231720.163121-5-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

hw/pci-host: pnv_phb{3, 4}: Fix heap out-of-bound access failure

pnv_phb3_root_bus_info and pnv_phb4_root_bus_info are missing the
instance_size initialization. This results in accessing out-of-bound
memory when setting 'chip-id' and 'phb-id', and eventually crashes
glib's malloc functionality with the following message:

  "qemu-system-ppc64: GLib: ../glib-2.72.3/glib/gmem.c:131: failed to allocate 3232 bytes"

This issue was noticed only when running qtests with QEMU Windows
32-bit executable. Windows 64-bit, Linux 32/64-bit do not expose
this bug though.

Fixes: 9ae1329ee2fe ("ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge")
Fixes: 4f9924c4d4cf ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220920103159.1865256-29-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

hw/ppc: spapr: Use qemu_vfree() to free spapr->htab

spapr->htab is allocated by qemu_memalign(), hence we should use
qemu_vfree() to free it.

Fixes: c5f54f3e31bf ("pseries: Move hash page table allocation to reset time")
Fixes: b4db54132ffe ("target/ppc: Implement H_REGISTER_PROCESS_TABLE H_CALL"")
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220920103159.1865256-28-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

tests/vm: Remove obsolete Fedora VM test

It's still based on Fedora 30 - which is not supported anymore by QEMU
since years. Seems like nobody is using (and refreshing) this, and it's
easier to test this via a container anyway, so let's remove this now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220822175317.190551-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220914155950.804707-18-alex.bennee@linaro.org>

tests/docker: remove amd64 qemu/debian10 dependency

We missed removing this dependency when we flattened the build.

Fixes 9e19fd7d4a (tests/docker: update debian-amd64 with lcitool)

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-17-alex.bennee@linaro.org>

tests/docker: remove tricore qemu/debian10 dependency

We missed removing this dependency when we flattened the build.

Fixes: 39ce923732 (gitlab: enable a very minimal build with the tricore container)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-16-alex.bennee@linaro.org>

tests/docker: flatten debian-powerpc-test-cross

Flatten into a single dockerfile. We really don't need the rest of the
stuff from the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-15-alex.bennee@linaro.org>

tests/docker: update and flatten debian-sparc64-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-14-alex.bennee@linaro.org>

tests/docker: update and flatten debian-sh4-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-13-alex.bennee@linaro.org>

tests/docker: update and flatten debian-mips64-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-12-alex.bennee@linaro.org>

tests/docker: update and flatten debian-m68k-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-11-alex.bennee@linaro.org>

tests/docker: update and flatten debian-hppa-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-10-alex.bennee@linaro.org>

tests/docker: update and flatten debian-alpha-cross

Update to the latest stable Debian. While we are at it flatten into a
single dockerfile. We really don't need the rest of the stuff from
the QEMU base image just to compile test images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-9-alex.bennee@linaro.org>

tests/avocado: reduce the default timeout to 120s

We should be aiming to keep our tests under 2 minutes so lets reduce
the default timeout to that. Tests that we know take longer should
explicitly set a longer timeout.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-8-alex.bennee@linaro.org>

tests/avocado: split the AST2x00Machine classes

The SDK tests take a lot longer to run and hence need a longer
timeout. As they run well over the 60 second maximum for CI lets also
disable them for CI as well.

I suspect they also suffer from the inability to detect the login
prompt due to no newlines being processed.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-7-alex.bennee@linaro.org>

tests/avocado: add explicit timeout for ppc64le TCG tests

We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-6-alex.bennee@linaro.org>

tests/avocado: add explicit timeout for s390 TCG tests

We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220914155950.804707-5-alex.bennee@linaro.org>

tests/avocado: add explicit timeout for Aarch64 TCG tests

We don't want to rely on the soon to be reduced default time. These
tests are still slow for something we want to run in CI though.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-4-alex.bennee@linaro.org>

tests/avocado/boot_linux_console: Fix the test_aarch64_xlnx_versal_virt test

The assets that this test tries to download have been removed from the
server. Update to a newer version to get it working again.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220829080940.110831-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220914155950.804707-3-alex.bennee@linaro.org>

gitlab: reduce targets in cross_user_build_job

We already limit the scope of the cross system build to reduce the
cross build times. With the recent addition of more targets we are
also running into timeout issues for some of the cross user builds.

I've selected a few of those linux-user targets which are less likely
to be in common use as distros don't have pre-built rootfs for them.
I've also added the same CROSS_SKIP_TARGETS variable as is
occasionally used to further limit cross system builds.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-2-alex.bennee@linaro.org>

target/ppc: Clear fpstatus flags on helpers missing it

In ppc emulation, exception flags are not cleared at the end of an
instruction. Instead, the next instruction is responsible to clear
it before its emulation. However, some helpers are not doing it,
causing an issue where the previously set exception flags are being
used and leading to incorrect values being set in FPSCR.
Fix this by clearing fp_status before doing the instruction 'real' work
for the following helpers that were missing this behavior:

- VSX_CVT_INT_TO_FP_VECTOR
- VSX_CVT_FP_TO_FP
- VSX_CVT_FP_TO_INT_VECTOR
- VSX_CVT_FP_TO_INT2
- VSX_CVT_FP_TO_INT
- VSX_CVT_FP_TO_FP_HP
- VSX_CVT_FP_TO_FP_VECTOR
- VSX_CMP
- VSX_ROUND
- xscvqpdp
- xscvdpsp[n]

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-9-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Zero second doubleword of VSR registers for FPR insns

FPR register are mapped to the first doubleword of the VSR registers.
Since PowerISA v3.1, the second doubleword of the target register
must be zeroed for FP instructions.

This patch does it by writting 0 to the second dw everytime the
first dw is being written using set_fpr.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-8-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Set OV32 when OV is set

According to PowerISA: "OV32 is set whenever OV is implicitly set, and
is set to the same value that OV is defined to be set to in 32-bit
mode".

This patch changes helper_update_ov_legacy to set/clear ov32 when
applicable.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-7-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Zero second doubleword for VSX madd instructions

In 205eb5a89e we updated most VSX instructions to zero the
second doubleword, as is requested by PowerISA since v3.1.
However, VSX_MADD helper was left behind unchanged, while it
is also affected and should be fixed as well.

This patch applies the fix for MADD instructions.

Fixes: 205eb5a89e ("target/ppc: Change VSX instructions behavior to fill with zeros")
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-6-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Set result to QNaN for DENBCD when VXCVI occurs

According to the ISA, for instruction DENBCD:
"If an invalid BCD digit or sign code is detected in the source
operand, an invalid-operation exception (VXCVI) occurs."

In the Invalid Operation Exception section, there is the situation:
"When Invalid Operation Exception is disabled (VE=0) and Invalid
Operation occurs (...) If the operation is an (...) or format the
target FPR is set to a Quiet NaN". This was not being done in
QEMU.

This patch sets the result to QNaN when the instruction DENBCD causes
an Invalid Operation Exception.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-5-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Zero second doubleword in DFP instructions

Starting at PowerISA v3.1, the second doubleword of the registers
used to store results in DFP instructions are supposed to be zeroed.

From the ISA, chapter 7.2.1.1 Floating-Point Registers:
"""
Chapter 4. Floating-Point Facility provides 32 64-bit
FPRs. Chapter 5. Decimal Floating-Point also employs
FPRs in decimal floating-point (DFP) operations. When
VSX is implemented, the 32 FPRs are mapped to
doubleword 0 of VSRs 0-31. (...)
All instructions that operate on an FPR are redefined
to operate on doubleword element 0 of the
corresponding VSR. (...)
and the contents of doubleword element 1 of the
VSR corresponding to the target FPR or FPR pair for these
instructions are set to 0.
"""

Before, the result stored at doubleword 1 was said to be undefined.

With that, this patch changes the DFP facility to zero doubleword 1
when using set_dfp64 and set_dfp128. This fixes the behavior for ISA
3.1 while keeping the behavior correct for previous ones.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove unused xer_* macros

The macros xer_ov, xer_ca, xer_ov32, and xer_ca32 are both unused and
hiding the usage of env. Remove them.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Remove extra space from s128 field in ppc_vsr_t

Very trivial rogue space removal. There are two spaces between Int128
and s128 in ppc_vsr_t struct, where it should be only one.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220906125523.38765-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Merge fsqrt and fsqrts helpers

These two helpers are almost identical, differing only by the softfloat
operation it calls. Merge them into one using a macro.
Also, take this opportunity to capitalize the helper name as we moved
the instruction to decodetree in a previous patch.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220905123746.54659-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Move fsqrts to decodetree

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220905123746.54659-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Move fsqrt to decodetree

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220905123746.54659-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Implement hashstp and hashchkp

Implementation for instructions hashstp and hashchkp, the privileged
versions of hashst and hashchk, which were added in Power ISA 3.1B.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220715205439.161110-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Implement hashst and hashchk

Implementation for instructions hashst and hashchk, which were added
in Power ISA 3.1B.

It was decided to implement the hash algorithm from ground up in this
patch exactly as described in Power ISA.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220715205439.161110-3-victor.colombo@eldorado.org.br>
[danielhb: fix block comment in excp_helper.c]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

target/ppc: Add HASHKEYR and HASHPKEYR SPRs

Add the Special Purpose Registers HASHKEYR and HASHPKEYR, which were
introduced by the Power ISA 3.1B. They are used by the new instructions
hashchk(p) and hashst(p).

The ISA states that the Operating System should generate the value for
these registers when creating a process, so it's its responsability to
do so. We initialize it with 0 for qemu-softmmu, and set a random 64
bits value for linux-user.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220715205439.161110-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>

qga: Replace 'blacklist' and 'whitelist' in the guest agent sources

Let's use better, more inclusive wording here.

Message-Id: <20220727092135.302915-3-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qga: Replace 'blacklist' command line and config file options by 'block-rpcs'

Let's use a more appropriate wording for this command line and config
file option. The old ones are still accepted for compatibility reasons,
but marked as deprecated now so that it could be removed in a future
version of QEMU.

This change is based on earlier patches from Philippe Mathieu-Daudé,
with the idea for the new option name suggested by BALATON Zoltan.

And while we're at it, replace the "?" in the help text with "help"
since that does not have the problem of conflicting with the wildcard
character of the shells.

Message-Id: <20220727092135.302915-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Update the FreeBSD 13 job from 13.0 to 13.1

The FreeBSD 13 job in our CI started failing since the python port
stopped working after 13.1 has been released. Thus update our CI
job to FreeBSD 13.1 to get it working again.

Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220920102041.45067-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests: sb16 has both pc and q35 tests

Check that the machines are compiled in before calling it

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902173452.1904-6-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests: Only run intel-hda-tests if machine type is compiled in

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902173452.1904-5-quintela@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Thomas Huth <thuth@redhat.com>

bios-tables-test: Only run test for machine types compiled in

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902173452.1904-4-quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

bios-tables-test: Sort all x86_64 tests by machine type

No code change here, just move test around.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902173452.1904-3-quintela@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Thomas Huth <thuth@redhat.com>

bios-tables-test: Make oem-fields tests be consistent

Every other test function is named:

test_acpi_<machine>_<test>()

Just make this test the same.  Once there, rename "acpi/oem-fields" to
"acpi/piix4/oem-fields" so it is consistent with everything else.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902173452.1904-2-quintela@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

meson-build: Enable CONFIG_REPLICATION only when replication is set

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902165126.1482-8-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests: Fix error strings

They were copy-pasted from e1000e and never changed.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902165126.1482-7-quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/loongarch: Improve acpi dsdt table

Cleanup the previous pci information in acpi dsdt table.
And using the common acpi_dsdt_add_gpex function to build
the gpex and pci information.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-10-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

hw/loongarch: Support memory hotplug

Add hotplug/unplug interface for memory device.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-9-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

hw/loongarch: Fix acpi ged irq number in dsdt table

In dsdt, acpi ged irq should use gsi number, and the
VIRT_SCI_IRQ means it.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-8-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

hw/loongarch: Add RAMFB to dynamic_sysbus_devices list

Add RAMFB device to dynamic_sysbus_devices list so that it can be
hotpluged to the machine.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-7-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

hw/loongarch: Add hotplug handler for machine

Add hotplug handler for LoongArch virt machine and now only support
the dynamic sysbus device.

Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-6-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>