staging: r8188eu: Use skb_put_data() instead of skb_put/memcpy pair

Use skb_put_data() instead of skb_put() and memcpy(), which is shorter
and clear. Drop the tmp variable that is not needed any more.

Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927024050.13556-1-shangxiaojing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove hal/odm_RegConfig8188E.c

All remaining functions in hal/odm_RegConfig8188E.c are only used
in hal/HalHWImg8188E_BB.c. Make them static and remove the now empty
file hal/odm_RegConfig8188E.c and the header odm_RegConfig8188E.h.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220926173243.8767-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: make odm_ConfigRF_RadioA_8188E() static

The function odm_ConfigRF_RadioA_8188E() is only used in
HalHWImg8188E_RF.c. Make it static.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220926173243.8767-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: make odm_ConfigMAC_8188E() static

The function odm_ConfigMAC_8188E() is only used in HalHWImg8188E_MAC.c.
Make it static.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220926173243.8767-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: don't check for stop/removal in the blink worker

The blink_work function calls either SwLedOff or SwLedOn. These two
functions handle bSurpriseRemoved and bDriverStopped.

There's no need to check bSurpriseRemoved and bDriverStopped again in the
blink worker.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220925140406.112991-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: don't check bSurpriseRemoved in SwLedOff

The SwLedOff function calls rtw_read8 which in turn calls usb_read.

bSurpriseRemoved is checked in usb_read. We don't have to check it again
in SwLedOff.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220925140406.112991-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove unused variables ForcedAMSDUMaxSize, ...

Remove unused variables that are may just once written but never read
ForcedAMSDUMaxSize, PeerBandwidth, SwBwStep, bIsPeerBcm and
bAcceptAddbaReq to avoid CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0f3e63030511f72dbadc0368fd5e2dbd3ff84e07.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename CurrentMPDU..., ForcedAMPDU... and ForcedMPDU...

Rename variable CurrentMPDUDensity to current_mpdu_density,
ForcedAMPDUFactor to forced_ampdu_factor and ForcedMPDUDensity to
forced_mpdu_density to avoid CamelCase which is not accepted by
checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4fb37ad6dab9addccf99a41a861220840c123e9b.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename SelfMimoPs, CurrentOpMode and bForcedShortGI

Rename variable SelfMimoPs to self_mimo_ps, CurrentOpMode to
current_op_mode and bForcedShortGI to forced_short_gi to avoid CamelCase
which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4c59f62a95b9a77711284998b98fbc559b8db813.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename PeerMimoPs, IOTAction and IOTRaFunc

Rename variable PeerMimoPs to peer_mimo_ps, IOTAction to iot_action and
IOTRaFunc to iot_ra_func to avoid CamelCase which is not accepted by
checkpatch. Added spaces around '&' as proposed by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/2a8ce7bff9a00fe44c057242cedb27ca91219137.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename RxRe...WinSize, RxReorder... and RxReorderDr...

Rename variable RxReorderWinSize to rx_reorder_win_size,
RxReorderPendingTime to rx_reorder_pending_time and RxReorderDropCounter
to rx_reorder_drop_counter to avoid CamelCase which is not accepted by
checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e09ef6e2edc88e32782202589a9230204b547a9c.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename szRT2RTAggBuffer, bRegRxRe... and bCurRxReo...

Rename variable szRT2RTAggBuffer to sz_rt2rt_agg_buf, bRegRxReorderEnable
to reg_rx_reorder_enable and bCurRxReorderEnable to cur_rx_reorder_enable
to avoid CamelCase which is not accepted by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/af445e0a80dc8e153a1ba81df99309f19a69d6cb.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename bSwBwInPro..., bRegRT2RTAg... and bCurrentRT...

Rename variable bSwBwInProgress to sw_bw_in_progress, bRegRT2RTAggregation
to reg_rt2rt_aggregation and bCurrentRT2RTAggregation to
current_rt2rt_aggregation to avoid CamelCase which is not accepted by
checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/868f9db0e29bd170129f90bdbcc14238a750c440.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename dot11Cur..., bCurTxBW40MHz and bCurrentRT2...

Rename variable dot11CurrentPreambleMode to dot11_current_preamble_mode,
bCurTxBW40MHz to cur_tx_bw40mhz and bCurrentRT2RTLongSlotTime to
current_rt2rt_long_slot_time to avoid CamelCase which is not accepted
by checkpatch.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/97c4f62da9a98b0ddcdaafae68182e3eb47f9a17.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename eRfSleep, eRfPowerStateToSet and RfOffReason

Rename variable eRfSleep to rf_sleep, eRfPowerStateToSet to
rf_power_state_to_set and RfOffReason to rf_off_reason to avoid CamelCase
which is not accepted by checkpatch. Omit the upfront "e" as no RfSleep
and RfPowerStateToSet exist and it makes the variables unnecessary long.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/58e21e5cf86270edae93162db2395e6348c9c424.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename eRFPowerState, eRfOff and eRfOn

Rename variable eRFPowerState to rf_power_state, eRfOff to rf_off and
eRfOn to rf_on to avoid CamelCase which is not accepted by checkpatch.
Omit the upfront "e" as no RFPowerState, RfOff and RfOn exist and it
makes the variables unnecessary long.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/52c676bbaf1f894e30971c5c409b4bcb71c8ef7e.1664055213.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fwserial: delete the driver.

In the years since it was added (2012), no one has stepped up to
maintain this properly and get it merged into the kernel tree.  So
remove it as it's obviously not being used.

If it is being used, we can easily revert this and take the time to get
it out of the staging tree.

Link: https://lore.kernel.org/r/20220924105817.808385-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: fix CamelCase variables

Fix checkpatch warnings for variables: LinkCtrlReg, DeviceID,
RevisionID, IrqLine.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20220925123810.2492865-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename Tx_Retry_Count_Reg

Rename: Current_Tx_Rate_Reg to CURRENT_TX_RATE_REG, Initial_Tx_Rate_Reg to
INITIAL_TX_RATE_REG and Tx_Retry_Count_Reg to TX_RETRY_COUNT_REG to avoid
CamelCase which is not accepted by checkpatch.pl.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Dragan Cvetic <dragan.m.cvetic@gmail.com>
Link: https://lore.kernel.org/r/20220924225126.10527-1-dragan.m.cvetic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove two unused enum entries

Both LED_BLINK_StartToBlink and LED_BLINK_RUNTOP in enum LED_STATE_871x
are not used in the r8188eu driver. Remove them.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove duplicate bSurpriseRemoved check

We don't have to check bSurpriseRemoved in the SwLedOn function.

SwLedOn calls rtw_read8 which in turn calls usb_read. This function checks
bSurpriseRemoved for us.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove BlinkingLedState

Both bLedOn and BlinkingLedState in struct led_priv store the same
information.

The boolean bLedOn stores the curent led state while BlinkingLedState
stores the next led state to be set during blinking, which is the inverse
of the current led state. (The led is either off or blinking, it's never
continuously on.)

This patch removes BlinkingLedState and uses bLedOn instead.

The LED_BLINK_WPS_STOP case in blink_work checked for
pLed->BlinkingLedState != RTW_LED_ON. This is true if the next led
blinking state is ON, i.e. if the led has just been switched off by
blink_work, i.e. if (!pLed->bLedOn).

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove bLedNoLinkBlinkInProgress

Remove the bLedNoLinkBlinkInProgress state variable. Its sole purpose is
to block subsequent requests for "no link" blinking when this blinking
pattern is already active.

It's perfectly safe to restart "no link" blinking. We can remove
bLedNoLinkBlinkInProgress and the many places where it's updated.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: update status before wps success blinking

Always update the status variables in rtw_led_control when we start
blinking to show that wps was successful. The if statements are not
necessary.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: cancel blink_work during wps stop

We can always cancel blink_work during wps_stop. The blinking pattern will
be updated to show that wps was successful. Another worker will be started
for this.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220918175700.215170-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Fix return type of rtw_xmit_entry

The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.

The return type of rtw_xmit_entry should be changed from int to
netdev_tx_t.

Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Reported-by: Dan Carpenter <error27@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/r/20220914211606.423959-1-nhuck@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: fix potential memory leak in _rtw_init_xmit_priv()

In _rtw_init_xmit_priv(), there are several error paths for allocation
failures just jump to the `exit` section. However, there is no action
will be performed, so the allocated resources are not properly released,
which leads to various memory leaks.

To properly release them, this patch unifies the error handling code and
several error handling paths are added.
According to the allocation sequence, if the validation fails, it will
jump to its corresponding error tag to release the resources.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_DB57E4F270F4539485C32B05FDAF8394310A@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: add kfree() on an error path of rtw_xmit_resource_alloc()

In rtw_xmit_resource_alloc(), if usb_alloc_urb() fails, then the memory
`pxmitbuf->pallocated_buf` which is allocated by kzalloc() is not properly
released before returning.
So this patch adds kfree() on the above error path to release it in time.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_3B46EE3287288555389AD2EC3F388827B306@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove recv_osdep.h

The functions _rtw_init_recv_priv(), _rtw_free_recv_priv() and
rtw_recv_entry() are defined in rtw_recv.c. Move their prototypes from
recv_osdep.h to rtw_recv.h.

Move the last two remaining prototypes netdev_open() and netdev_close()
from recv_osdep.h to osdep_intf.h. That is a more appropriate place and
we can remove recv_osdep.h.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911174933.3784-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused prototypes from recv_osdep.h

The function prototypes rtw_recv_returnpacket(), rtw_init_recv_priv()
and rtw_free_recv_priv() are not used. Remove them.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911174933.3784-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: make _netdev_open() static

The function _netdev_open() is only used in os_intfs.c.
Make it static.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911174933.3784-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: replace tabs with space in odm_query_rxpwrpercentage()

In statements spaces should be used not tabs. Replace tabs withs spaces
in two return statements in odm_query_rxpwrpercentage().

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: clean up camel case in odm_query_rxpwrpercentage()

Rename the variable 'AntPower' in odm_query_rxpwrpercentage() to avoid
camel case.

AntPower -> antpower

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename odm_QueryRxPwrPercentage()

Rename odm_QueryRxPwrPercentage() to avoid camel case.

odm_QueryRxPwrPercentage -> odm_query_rxpwrpercentage

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unnecessary initialization

The variable 'retsig' in odm_signal_scale_mapping() is set in the
function before it returns, so it is not needed to initialize it.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: clean up camel case in odm_signal_scale_mapping()

Rename variables in odm_signal_scale_mapping() to avoid camel case.

CurrSig -> currsig
RetSig -> retsig

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rename odm_SignalScaleMapping()

Rename odm_SignalScaleMapping() to avoid camel case.

odm_SignalScaleMapping -> odm_signal_scale_mapping

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220911161949.11293-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: update status before link blinking

Always update the status variables in rtw_led_control when we start link
blinking. The if statements are not necessary.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: cancel blink_work before link blinking

Cancel blink_work before we start link blinking. Another worker will be
scheduled after the state variables are updated.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: simplify the code to prevent link blinking restart

The blinking code to signal that a link is up has the same big if clause
around it as most other blink events.

Revert this if condition and exit if we're already blinking to show that
the link is up.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: update status before scan blinking

Always update the status variables in rtw_led_control when we start tx/rx
blinking. The if statements are not necessary.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: cancel blink_work before tx/rx blinking

Cancel blink_work before we start tx/rx blinking. Another worker will be
scheduled after the state variables are updated.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: simplify the code to prevent tx/rx blinking restart

The code for tx/rx blinking is wrapped into a big if clause to prevent
restarting if tx/rx blinking is already running.

Revert the if condition and exit if tx/rx blinking is running. This does
not change the behaviour.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: update status before scan blinking

Always update the status variables in rtw_led_control when we start scan
blinking. The if statements are not necessary.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: cancel blink_work before scan blinking

Cancel blink_work before we start scan blinking. Another worker will be
scheduled after the state variables are updated.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: simplify the code to prevent scan blinking restart

The code for scan blinking is wrapped into a big if clause to prevent
restarting if scan blinking is already running.

Revert the if condition and exit if scan blinking is running. This does
not change the behaviour.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220911145122.15444-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: fix a potential memory leak in rtw_init_cmd_priv()

In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated
in failure, then `pcmdpriv->cmd_allocated_buf` will not be properly
released. Besides, considering there are only two error paths and the
first one can directly return, we do not need to implicitly jump to the
`exit` tag to execute the error handling code.

So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error
path to release the resource and simplified the return logic of
rtw_init_cmd_priv(). As there is no proper device to test with, no
runtime testing was performed.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_1B6AAE10471D4556788892F8FF3E4812F306@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Fix return type of cvm_oct_xmit and cvm_oct_xmit_pow

The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.

The return type of cvm_oct_xmit and cvm_oct_xmit_pow should be changed
from int to netdev_tx_t.

Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/r/20220914211057.423617-1-nhuck@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: use DEFINE_SHOW_ATTRIBUTE to simplify pi433_debugfs_regs

Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
No functional change.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20220922142548.3248951-1-liushixin2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix return type of ieee80211_xmit

The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.

The return type of ieee80211_xmit should be changed from int to
netdev_tx_t.

Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/r/20220914210750.423048-1-nhuck@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix some erroneous memory clean-up loops

In some initialization functions of this driver, memory is allocated with
'i' acting as an index variable and increasing from 0. The commit in
"Fixes" introduces some clean-up codes in case of allocation failure,
which free memory in reverse order with 'i' decreasing to 0. However,
there are some problems:
  - The case i=0 is left out. Thus memory is leaked.
  - In case memory allocation fails right from the start, the memory
    freeing loops will start with i=-1 and invalid memory locations will
    be accessed.

One of these loops has been fixed in commit c8ff91535880 ("staging:
vt6655: fix potential memory leak"). Fix the remaining erroneous loops.

Link: https://lore.kernel.org/linux-staging/Yx9H1zSpxmNqx6Xc@kadam/
Fixes: 5341ee0adb17 ("staging: vt6655: check for memory allocation failures")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220912170429.29852-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Add a blank line after declarations

This patch adds a blank line in order to fix checkpatch warning

Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220922122310.3379711-5-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Make switch and case at the same indent

This patch fixes switch and case as linux kernel coding style
and amend this error generated by checkpatch:

  ERROR: switch and case should be at the same indent

Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220922122310.3379711-4-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Relocate constant on the right side of test

This patch fixes following warning generated by checkpatch:

  WARNING: Comparisons should place the constant on the right side of the test

Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220922122310.3379711-3-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: replace code indent as tabs

This patch removes error below generated by checkpatch

ERROR: code indent should use tabs where possible

Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220922122310.3379711-2-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Fix coding style issue in block comment

This patch removes the following warning generated by checkpatch.pl

  WARNING: Block comments use * on subsequent lines
  #206: FILE: rtw_recv.c:206:
  +/*
  +signed int     rtw_enqueue_recvframe(union recv_frame *precvframe, struct __queue *queue)

  WARNING: Block comments use * on subsequent lines
  #216: FILE: rtw_recv.c:216:
  +/*
  +caller : defrag ; recvframe_chk_defrag in recv_thread  (passive)

Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220919133408.3271462-1-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Insert blank line after declarations

This patch fixes checkpatch warning as follows:

  WARNING: Missing a blank line after declarations

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220917181620.3237192-1-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove braces in single statement blocks

This commit cleans up checkpatch warning as follows:
WARNING: braces {} are not necessary for single statement blocks

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20220913162510.3134430-1-tegongkang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv()

In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated
in failure, then `pcmdpriv->cmd_allocated_buf` will be not properly
released. Besides, considering there are only two error paths and the
first one can directly return, so we do not need implicitly jump to the
`exit` tag to execute the error handler.

So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error
path to release the resource and simplified the return logic of
rtw_init_cmd_priv(). As there is no proper device to test with, no runtime
testing was performed.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_2B7931B79BA38E22205C5A09EFDF11E48805@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw()

In rtw_init_drv_sw(), there are various init functions are called to
populate the padapter structure and some checks for their return value.
However, except for the first one error path, the other five error paths
do not properly release the previous allocated resources, which leads to
various memory leaks.

This patch fixes them and keeps the success and error separate.
Note that these changes keep the form of `rtw_init_drv_sw()` in
"drivers/staging/r8188eu/os_dep/os_intfs.c". As there is no proper device
to test with, no runtime testing was performed.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C3B899D2FC3F1BC827F3552E0B0734056006@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove ftrace-like logging in rtl819x_BAProc.c, ...

Remove "Unnecessary ftrace-like logging" as requested by checkpatch.
Remove multiline macro as it is not needed anymore and not liked by
kernel community.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/2c41e6856cd37b4f3e5cb1108272bcc24032bf64.1663387785.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove ftrace-like logging in rtl_ps.c

Remove "Unnecessary ftrace-like logging" as requested by checkpatch.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/6d942ba65f62643af2ff7104911f7947cca21790.1663387785.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove ftrace-like logging in rtl_dm.c

Remove "Unnecessary ftrace-like logging" as requested by checkpatch.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/bc0e2c9551ccf78fe388b27d18576b5bb195e2f7.1663387785.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove ftrace-like logging in r8192E_phy.c

Remove "Unnecessary ftrace-like logging" as requested by checkpatch.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/7315b22f54d62c5b56e8b9284426eca4cb641f77.1663387785.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove ftrace-like logging in r8192E_dev.c

Remove "Unnecessary ftrace-like logging" as requested by checkpatch.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/425e1b015c34ddb6df425bc516df64c40a70a58a.1663387785.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove ftrace-like logging in r8192E_firmware.c, ...

Remove "Unnecessary ftrace-like logging" as requested by checkpatch.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/370f47919a69f2f1717f50123c1617cabc78ceca.1663387785.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fwserial: Switch to kfree_rcu() API

Instead of invoking a synchronize_rcu() to free a pointer after a grace
period, we can directly make use of a new API that does the same but in
a more efficient way.

Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220920135145.1387-1-shangxiaojing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: remove unused p80211wext_handler_def declaration

p80211wext_handler_def has been removed since
commit cb3126e60ffc ("Staging: wlan-ng: Switch from wext
to cfg80211"), so remove it.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220911094255.3225461-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Rename function MACvSetCurrAC0DescAddrEx

Rename function MACvSetCurrAC0DescAddrEx to vt6655_mac_set_curr_ac_0...
to avoid CamelCase which is not accepted by checkpatch.pl. Remove
unnecessary declaration of function and make function static. Remove
unnecessary line break.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/dc3f83dfa8b83a02ed95da3cfb71c0139ba8b674.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Rename function MACvSetCurrTx0DescAddrEx

Rename function MACvSetCurrTx0DescAddrEx to vt6655_mac_set_curr_tx_0_...
to avoid CamelCase which is not accepted by checkpatch.pl. Remove
unnecessary declaration of function and make function static. Remove
unnecessary line break.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4337deed83e1443ebf93c5591e17f5c6dfe0cf55.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Cleanup and rename function MACvSetCurrTXDescAddr

Rename function MACvSetCurrTXDescAddr to vt6655_mac_set_curr_tx_desc_addr
and iTxType to tx_type to avoid CamelCase which is not accepted by
checkpatch.pl. Remove unnecessary line break.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/88dcbac76f6bad8b4eb68a3cb37cd4f9684294a0.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Rename function MACvSetCurrRx1DescAddr

Rename function MACvSetCurrRx1DescAddr to vt6655_mac_set_curr_rx_1_desc...
to avoid CamelCase which is not accepted by checkpatch.pl. Remove
unnecessary line break.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0d11f588d4746988478521d323ab49e6a0b7f8b0.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Rename function MACvSetCurrRx0DescAddr

Rename function MACvSetCurrRx0DescAddr to vt6655_mac_set_curr_rx_0_desc...
to avoid CamelCase which is not accepted by checkpatch.pl. Remove
unnecessary line break.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/14f7f2b06ba9f8656d91d4cb84c363e190095049.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Rename function MACbSafeStop

Rename function MACbSafeStop to vt6655_mac_safe_stop to avoid CamelCase
which is not accepted by checkpatch.pl. Remove unnecessary declaration
of function and make function static.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/5c91b281dfab75e5ccf13413232ec993a8056af8.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Rename function MACbSafeTxOff

Rename function MACbSafeTxOff to vt6655_mac_safe_tx_off to avoid
CamelCase which is not accepted by checkpatch.pl. Remove unnecessary
declaration of function and make function static.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/50211bbdd866be93fe9ea912a433e56460bf7f28.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Rename function MACbSafeRxOff

Rename function MACbSafeRxOff to vt6655_mac_safe_rx_off to avoid
CamelCase which is not accepted by checkpatch.pl. Remove unnecessary
declaration of function and make function static.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0cbcc7205e943393e2873839116d5ffcfb9d3d00.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Cleanup and rename function MACbSafeSoftwareReset

Rename function MACbSafeSoftwareReset to vt6655_mac_save_soft_reset and
abyTmpRegData to tmp_reg_data to avoid CamelCase which is not accepted by
checkpatch.pl. Remove return value bRetVal as it is unused by the calling
functions. Remove unnecessary declaration of function and make function
static. Change declaration of tmp_reg_data to shorten code.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/540a684266610f7618b3ef6000d4699d065c8e6f.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Cleanup and rename function MACvRestoreContext

Rename function MACvRestoreContext to vt6655_mac_restore_context to avoid
CamelCase which is not accepted by checkpatch.pl. Remove unnecessary
declaration of function and make function static. Change declaration of
cxt_buf to shorten code.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/3d215bbf1675fd093c9b31fbf3b29ce09432ab27.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Cleanup and rename function MACvSaveContext

Rename function MACvSaveContext to vt6655_mac_save_context to avoid
CamelCase which is not accepted by checkpatch.pl. Remove unnecessary
declaration of function and make function static. Change declaration of
cxt_buf to shorten code.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/f514711695f1eafde9996edcc246da2adcd5f9c5.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Cleanup and rename function MACvSetLoopbackMode

Rename function MACvSetLoopbackMode to vt6655_mac_set_loopback_mode and
byLoopbackMode to loopback_mode to avoid CamelCase which is not accepted
by checkpatch.pl. Remove unnecessary declaration of function and made
function static. Change declaration of loopback_mode to shorten code and
remove unnecessary line break.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/02ce61620e13eb7fd24833e59a288f52bf5b9730.1662890990.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename CurSlotTime

Rename variable CurSlotTime to cur_slot_time to avoid CamelCase which is
not accepted by checkpatch.pl.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/1b71366d87b2b178fcd8f182127a51c7a7507936.1662402870.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename bHwRadioOff

Rename variable bHwRadioOff to hw_radio_off to avoid CamelCase which is
not accepted by checkpatch.pl.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/bb977791e835310e51e9c38cc5c547e0b8a35e0c.1662402870.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename RFChangeInProgress

Rename variable RFChangeInProgress to rf_change_in_progress to avoid
CamelCase which is not accepted by checkpatch.pl.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/29739986e76750395941ddaa6c4f0ffab6eb26a9.1662402870.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename RFWaitCounter

Rename variable RFWaitCounter to rf_wait_counter to avoid CamelCase which
is not accepted by checkpatch.pl.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/11acf28a0b9f56dde4fa4fbd74a085cf2fa1c20d.1662402870.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtState

Rename variable rtState to rt_state to avoid CamelCase which
is not accepted by checkpatch.pl.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e888fa7e6edaa68e741236ea012f8230f6817882.1662402870.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename bConnectBySSID

Rename variable bConnectBySSID to connect_by_ssid to avoid CamelCase which
is not accepted by checkpatch.pl.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/2b193be93598348994b1f890b6dc5c2ffb84a9b6.1662402870.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename bActionAllowed

Rename variable bActionAllowed to action_allowed to avoid CamelCase which
is not accepted by checkpatch.pl.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e8b617ab58c360bb485cb51d080a8ef81cd47869.1662402870.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename ChangeSource

Rename variable ChangeSource to change_source to avoid CamelCase which
is not accepted by checkpatch.pl.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0d934bb707510692ccd161ea6034b69133aac14c.1662402870.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rtw_is_scan_deny is always false

The rtw_is_scan_deny macro returns false. Remove the macro and resulting
dead code.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220910180236.489808-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtw_clear_scan_deny

The rtw_clear_scan_deny macro is empty. Remove it.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220910180236.489808-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtw_set_scan_deny_timer_hdl

Remove the rtw_set_scan_deny_timer_hdl macro, it's not used.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220910180236.489808-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove empty rtw_set_scan_deny macro

The rtw_set_scan_deny macro does nothing. Remove it.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Acked-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220910180236.489808-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix potential memory leak

In function device_init_td0_ring, memory is allocated for member
td_info of priv->apTD0Rings[i], with i increasing from 0. In case of
allocation failure, the memory is freed in reversed order, with i
decreasing to 0. However, the case i=0 is left out and thus memory is
leaked.

Modify the memory freeing loop to include the case i=0.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220909141338.19343-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: make c2h_evt_read() static

The function c2h_evt_read() is only used in rtw_cmd.c.
Make it static.

This addresses the TODO item:
* Remove the HAL layer and migrate its functionality into the relevant
  parts of the driver.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220909100232.8305-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove unnecessary null check

Remove null check for priv->tx0_bufs, because it can never be null at
this point.

Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220909100650.44609-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Fix return type for implementation of ndo_start_xmit

CFI (Control Flow Integrity) is a safety feature allowing the system to
detect and react should a potential control flow hijacking occurs. In
particular, the Forward-Edge CFI protects indirect function calls by
ensuring the prototype of function that is actually called matches the
definition of the function hook.

Since Linux now supports CFI, it will be a good idea to fix mismatched
return type for implementation of hooks. Otherwise this would get
cought out by CFI and cause a panic.

Use enums from netdev_tx_t as return value instead. Then change return
type to netdev_tx_t.

Fixes: cf68fffb66d6 ("add support for Clang CFI")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20220909082048.14486-3-guozihua@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Delete un-necessary return for _rtw_xmit_entry()

As _rtw_xmit_entry() would always return 0, we are save to delete the
return value for it.

Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20220909082048.14486-2-guozihua@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix return type for implementation of ndo_start_xmit

CFI (Control Flow Integrity) is a safety feature allowing the system to
detect and react should a potential control flow hijacking occurs. In
particular, the Forward-Edge CFI protects indirect function calls by
ensuring the prototype of function that is actually called matches the
definition of the function hook.

Since Linux now supports CFI, it will be a good idea to fix mismatched
return type for implementation of hooks. Otherwise this would get
cought out by CFI and cause a panic.

Use enums from netdev_tx_t as return value instead, then change return
type to netdev_tx_t. Note that rtllib_xmit_inter() would return 1 only
on allocation failure and the queue is stopped if that happens, meeting
the documented requirement if NETDEV_TX_BUSY should be returned by
ndo_start_xmit.

Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20220905130053.10731-1-guozihua@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Fix return type for implementation of ndo_start_xmit

CFI (Control Flow Integrity) is a safety feature allowing the system to
detect and react should a potential control flow hijacking occurs. In
particular, the Forward-Edge CFI protects indirect function calls by
ensuring the prototype of function that is actually called matches the
definition of the function hook.

Since Linux now supports CFI, it will be a good idea to fix mismatched
return type for implementation of hooks. Otherwise this would get
cought out by CFI and cause a panic.

Use enums from netdev_tx_t as return value instead, then change return
type to netdev_tx_t.

Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20220905130230.11230-1-guozihua@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: fix camelcase in UserPriority

Replace camelcase variable UserPriority with snake case
variable user_priority.

Signed-off-by: Asif Khan <asif.kgauri@gmail.com>
Link: https://lore.kernel.org/r/20220904192400.8309-1-asif.kgauri@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>