clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-6-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-5-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-4-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-3-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Only compile tested.

Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-2-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays

The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().

Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-1-074334f0905c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times

SDM845 downstream uses non-default values for GDSC internal waits.
Program them accordingly to avoid surprises.

Fixes: 81351776c9fb ("clk: qcom: Add display clock controller driver for SDM845")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 6
Link: https://lore.kernel.org/r/20240103-topic-845gdsc-v1-1-368efbe1a61d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller

This clock controller has never been used in the DT files merged to the
kernel. According to Sibi, it only worked on the pre-production devices.
For the production devices this functionality has been moved to the
firmware.

Drop the bindings now after dropping the driver itself.

Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-2-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: drop the SC7180 Modem subsystem clock driver

This driver has never been used in the DT files merged to the kernel.
According to Sibi, it only worked on the pre-production devices. For the
production devices this functionality has been moved to the firmware.

Drop the driver to remove possible confusion.

Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-1-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Use qcom_branch_set_clk_en()

Instead of magically poking at the bit0 of branch clocks' CBCR, use
the newly introduced helper.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-2-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: branch: Add a helper for setting the enable bit

We hardcode some clocks to be always-on, as they're essential to the
functioning of the SoC / some peripherals. Add a helper to do so
to make the writes less magic.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-1-5b79eb7278b2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const

The clk_init_data and pll_vco structures are never modified, make
them const.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240201-dispcc-sm8150-v1-1-cbeb89015e5d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks

Add missing QREF clocks for UFS MEM and UFS CARD controllers.

Fixes: 4433594bbe5d ("clk: qcom: gcc: Add global clock controller driver for SC8180x")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240131-ufs-phy-clock-v3-4-58a49d2f4605@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org' into clk-for-6.9

Merge the two SC8180X reset defines through a topic branch, to allow
them being picked up in the DeviceTree source tree as well.

clk: qcom: gcc-msm8953: add more resets

Add new entries in the gcc driver for some more resets found on MSM8953.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: expand commit message, move entry, add more entries]
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240125-msm8953-mdss-reset-v2-2-fd7824559426@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz' into clk-for-6.9

Merge MSM8953 GCC DeviceTree binding update through topic branch, to
allow it to be merged into DeviceTree source tree as well.

clk: qcom: videocc-*: switch to module_platform_driver

There is no need to register video clock controllers during subsys init
calls. Use module_platform_driver() instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-4-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gpucc-*: switch to module_platform_driver

There is no need to register GPU clock controllers during subsys init
calls. Use module_platform_driver() instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-3-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: dispcc-*: switch to module_platform_driver

There is no need to register display clock controllers during subsys init
calls. Use module_platform_driver() instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-2-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: camcc-*: switch to module_platform_driver

There is no need to register camera clock controllers during subsys init
calls. Use module_platform_driver() instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240206-clk-module-platform-driver-v1-1-db799bd2feeb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8550: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value for SM8550 is known and extracted from the msm-5.15 driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-18-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8450: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8450, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/d0730ea5867264ee50b793f6700eb6a376ddcbbb

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-17-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8350: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8350, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-16-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8250: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.14/19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-15-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: videocc-sm8150: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.14/19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-14-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8650: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The Venus hw on 8650 is similar to the one on 8550, follow its
requirements.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-13-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8550: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value for SM8550 is known and extracted from the msm-5.15 driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-12-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8450: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8450, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/d0730ea5867264ee50b793f6700eb6a376ddcbbb

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-11-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8350: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value is known for SM8350, see [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-10-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8250: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-9-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm7150: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.14/19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-8-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm4450: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 4450 being somewhat close to 8350 which is known
to require a higher delay [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-7-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8280xp: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 8280 being generally close to 8350 which is known
to require a higher delay [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-6-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sc8180x: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained by referencing the msm-4.19 driver, which uses a
single value for all platforms [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/blob/LA.UM.9.15.c26/msm/vidc/hfi_common.c?ref_type=heads#L3662-3663

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-5-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sa8775p: Set delay for Venus CLK resets

Some Venus resets may require more time when toggling. Describe that.

The value was obtained on a best-guess basis: msm-5.4 being the base
kernel for this SoC and 8775 being generally close to 8350 which is known
to require a higher delay [1].

[1] https://git.codelinaro.org/clo/la/platform/vendor/opensource/video-driver/-/commit/dfe241edf23daf3c1ccbb79b02798965123fad98

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-4-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: reset: Ensure write completion on reset de/assertion

Trying to toggle the resets in a rapid fashion can lead to the changes
not actually arriving at the clock controller block when we expect them
to. This was observed at least on SM8250.

Read back the value after regmap_update_bits to ensure write completion.

Fixes: b36ba30c8ac6 ("clk: qcom: Add reset controller support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-3-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Add missing UFS QREF clocks

Add missing QREF clocks for UFS MEM and UFS CARD controllers.

Fixes: 0fadcdfdcf57 ("dt-bindings: clock: Add SC8180x GCC binding")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: gcc-msm8953: add more resets

Add new defines for some more BCRs found on MSM8953.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: expand commit message, add more resets]
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: reset: Commonize the de/assert functions

They do the same thing, except the last argument of the last function
call differs. Commonize them.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-2-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: reset: Increase max reset delay

u8 limits us to 255 microseconds of delay. Promote the delay variable to
u16 to hold bigger values.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-1-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add camcc clock driver for x1e80100

Add the camcc clock driver for x1e80100

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-10-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add TCSR clock driver for x1e80100

The TCSR clock controller found on X1E80100 provides refclks
for PCIE, USB and UFS. Add clock driver for it.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-9-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add GPU clock driver for x1e80100

Add Graphics Clock Controller (GPUCC) support for X1E80100 platform.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-8-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: Add dispcc clock driver for x1e80100

Add the dispcc clock driver for x1e80100.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-7-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure

Zonda ole pll has as extra PLL_OFF_CONFIG_CTL_U2 register, hence add
support for it.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-6-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org' into clk-for-6.9

Merge X1E clock bindings through a topic branch, to make the defines
available for inclusion in DeviceTree branches as well.

dt-bindings: clock: qcom: Document the X1E80100 Camera Clock Controller

Add bindings documentation for the X1E80100 Camera Clock Controller.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Document the X1E80100 TCSR Clock Controller

Add bindings documentation for the X1E80100 TCSR Clock Controller.

Co-developed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-4-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Document the X1E80100 GPU Clock Controller

Add bindings documentation for the X1E80100 Graphics Clock Controller.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-3-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Document the X1E80100 Display Clock Controller

Add bindings documentation for the X1E80100 Display Clock Controller.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-2-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: Drop the SM8650 DISPCC dedicated schema

The block is the same between these platforms, at least from devicetree
point of view. So drop the dedicated schema and use the SM8550 one instead.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-1-7fb08c861c7c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP

The servers for the @codeaurora domain are long retired and any messages
addressed there will bounce.  Govind Singh has left the company which
appears to leave the Q6SSTOP clock controller binding unmaintained.

Move maintenance of the binding to the Qualcomm Clock Drivers maintainer
as suggested by Bjorn Andersson.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240202171915.4101842-1-quic_jhugo@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gpucc-sc8280xp: Add external supply for GX gdsc

On SA8295P and SA8540P the GFX rail is powered by a dedicated external
regulator, instead of the rpmh-controlled "gfx.lvl".

Define the "vdd-gfx" as the supply regulator for the GDSC, to cause the
gdsc logic to look for, and control, this external power supply.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-3-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gdsc: Enable supply reglator in GPU GX handler

The GX GDSC is modelled to aid the GMU in powering down the GPU in the
event that the GPU crashes, so that it can be restarted again. But in
the event that the power-domain is supplied through a dedicated
regulator (in contrast to being a subdomin of another power-domain),
something needs to turn that regulator on, both to make sure things are
powered and to match the operation in gdsc_disable().

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-2-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: Allow VDD_GFX supply to GX

In some designs the SoC's VDD_GFX pads are supplied by an external
regulator, rather than a power-domain. Allow this to be described in the
GPU clock controller binding.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-1-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8150: Add gcc video resets for sm8150

Add gcc video axic, axi0 and axi1 resets for the global clock
controller on sm8150.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240111-sm8150-dfs-support-v2-3-6edb44c83d3b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom,gcc-sm8150: Add gcc video resets for sm8150

Add gcc video axic, axi0 and axi1 resets for the global clock controller
on sm8150.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240111-sm8150-dfs-support-v2-2-6edb44c83d3b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sm8150: Register QUPv3 RCGs for DFS on SM8150

QUPv3 clocks support DFS and thus register the RCGs which require
support for the same.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240111-sm8150-dfs-support-v2-1-6edb44c83d3b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-sdm845: Add soft dependency on rpmhpd

With the addition of RPMh power domain to the GCC node in
device tree, we noticed a significant delay in getting the
UFS driver probed on AOSP which futher led to mount failures
because Android do not support rootwait. So adding a soft
dependency on RPMh power domain which informs modprobe to
load rpmhpd module before gcc-sdm845.

Cc: stable@vger.kernel.org # v5.4+
Fixes: 4b6ea15c0a11 ("arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC")
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240123062814.2555649-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

clk: qcom: gcc-ipq6018: add qdss_at clock needed for wifi operation

Without it system hangs upon wifi firmware load. It should be enabled by
remoteproc/wifi driver. Bindings already exist for it, so add it based
on vendor code.

Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://lore.kernel.org/r/1706001970-26032-1-git-send-email-mantas@8devices.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Linux 6.8-rc1

Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Merge tag 'timers-core-2024-01-21' of git://git./linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Merge tag 'powerpc-6.8-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

bcachefs: Improve inode_to_text()

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: logged_ops_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: reflink_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; extents_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: ec_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: subvolume_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: snapshot_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: alloc_background_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: xattr_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: dirent_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: inode_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; quota_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: sb-counters_format.h

bcachefs_format.h has gotten too big; let's do some organizing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: counters.c -> sb-counters.c

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: comment bch_subvolume

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_snapshot::btime

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: add missing __GFP_NOWARN

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: opts->compression can now also be applied in the background

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Prep work for variable size btree node buffers

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: grab s_umount only if snapshotting

When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.

$ cat test.sh
prog=bcachefs

$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots

while true;do
    $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
    sleep 1s
done

$ cat /etc/mongodb.conf
systemLog:
  destination: file
  logAppend: true
  path: /mnt/data/mongod.log

storage:
  dbPath: /mnt/data/

lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G            E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
               but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
               which lock already depends on the new lock.

[ 3437.456553]
               the existing dependency chain (in reverse order) is:
[ 3437.457054]
               -> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507]        down_read+0x3e/0x170
[ 3437.457772]        bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206]        __x64_sys_ioctl+0x93/0xd0
[ 3437.458498]        do_syscall_64+0x42/0xf0
[ 3437.458779]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
               -> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615]        down_read+0x3e/0x170
[ 3437.459878]        bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276]        bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686]        notify_change+0x1f1/0x4a0
[ 3437.461283]        do_truncate+0x7f/0xd0
[ 3437.461555]        path_openat+0xa57/0xce0
[ 3437.461836]        do_filp_open+0xb4/0x160
[ 3437.462116]        do_sys_openat2+0x91/0xc0
[ 3437.462402]        __x64_sys_openat+0x53/0xa0
[ 3437.462701]        do_syscall_64+0x42/0xf0
[ 3437.462982]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
               -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843]        down_write+0x3b/0xc0
[ 3437.464223]        bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493]        vfs_write+0x21b/0x4c0
[ 3437.464653]        ksys_write+0x69/0xf0
[ 3437.464839]        do_syscall_64+0x42/0xf0
[ 3437.465009]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
               -> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471]        __lock_acquire+0x1455/0x21b0
[ 3437.465656]        lock_acquire+0xc6/0x2b0
[ 3437.465822]        mnt_want_write+0x46/0x1a0
[ 3437.465996]        filename_create+0x62/0x190
[ 3437.466175]        user_path_create+0x2d/0x50
[ 3437.466352]        bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617]        __x64_sys_ioctl+0x93/0xd0
[ 3437.466791]        do_syscall_64+0x42/0xf0
[ 3437.466957]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
               other info that might help us debug this:

[ 3437.469670] 2 locks held by bcachefs/35533:
               other info that might help us debug this:

[ 3437.467507] Chain exists of:
                 sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48

[ 3437.467979]  Possible unsafe locking scenario:

[ 3437.468223]        CPU0                    CPU1
[ 3437.468405]        ----                    ----
[ 3437.468585]   rlock(&type->s_umount_key#48);
[ 3437.468758]                                lock(&c->snapshot_create_lock);
[ 3437.469030]                                lock(&type->s_umount_key#48);
[ 3437.469291]   rlock(sb_writers#10);
[ 3437.469434]
                *** DEADLOCK ***

[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838]  #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294]  #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
               stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G            E      6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795]  <TASK>
[ 3437.471884]  dump_stack_lvl+0x57/0x90
[ 3437.472035]  check_noncircular+0x132/0x150
[ 3437.472202]  __lock_acquire+0x1455/0x21b0
[ 3437.472369]  lock_acquire+0xc6/0x2b0
[ 3437.472518]  ? filename_create+0x62/0x190
[ 3437.472683]  ? lock_is_held_type+0x97/0x110
[ 3437.472856]  mnt_want_write+0x46/0x1a0
[ 3437.473025]  ? filename_create+0x62/0x190
[ 3437.473204]  filename_create+0x62/0x190
[ 3437.473380]  user_path_create+0x2d/0x50
[ 3437.473555]  bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819]  ? lock_acquire+0xc6/0x2b0
[ 3437.474002]  ? __fget_files+0x2a/0x190
[ 3437.474195]  ? __fget_files+0xbc/0x190
[ 3437.474380]  ? lock_release+0xc5/0x270
[ 3437.474567]  ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764]  ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090]  __x64_sys_ioctl+0x93/0xd0
[ 3437.475277]  do_syscall_64+0x42/0xf0
[ 3437.475454]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================

In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.

Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().

Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:

[  406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[  406.830676 ] #PF: supervisor read access in kernel mode
[  406.831643 ] #PF: error_code(0x0000) - not-present page
[  406.832487 ] PGD 0 P4D 0
[  406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[  406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G           OE      6.7.0-rc7-custom+ #90
[  406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[  406.835796 ] RIP: 0010:kfree+0x62/0x140
[  406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[  406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[  406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[  406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[  406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[  406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[  406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[  406.840451 ] FS:  00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[  406.840851 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[  406.841464 ] Call Trace:
[  406.841583 ]  <TASK>
[  406.841682 ]  ? __die+0x1f/0x70
[  406.841828 ]  ? page_fault_oops+0x159/0x470
[  406.842014 ]  ? fixup_exception+0x22/0x310
[  406.842198 ]  ? exc_page_fault+0x1ed/0x200
[  406.842382 ]  ? asm_exc_page_fault+0x22/0x30
[  406.842574 ]  ? bch2_fs_release+0x54/0x280 [bcachefs]
[  406.842842 ]  ? kfree+0x62/0x140
[  406.842988 ]  ? kfree+0x104/0x140
[  406.843138 ]  bch2_fs_release+0x54/0x280 [bcachefs]
[  406.843390 ]  kobject_put+0xb7/0x170
[  406.843552 ]  deactivate_locked_super+0x2f/0xa0
[  406.843756 ]  cleanup_mnt+0xba/0x150
[  406.843917 ]  task_work_run+0x59/0xa0
[  406.844083 ]  exit_to_user_mode_prepare+0x197/0x1a0
[  406.844302 ]  syscall_exit_to_user_mode+0x16/0x40
[  406.844510 ]  do_syscall_64+0x4e/0xf0
[  406.844675 ]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  406.844907 ] RIP: 0033:0x7f0a2664e4fb

Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bios must be 512 byte algined

Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: remove redundant variable tmp

The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve trace_trans_restart_relock

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix excess transaction restarts in __bchfs_fallocate()

drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: extents_to_bp_state

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bkey_and_val_eq()

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Better journal tracepoints

Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Print size of superblock with space allocated

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Avoid flushing the journal in the discard path

When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.

But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve move_extent tracepoint

Also print out the data_opts, so that we can see what specifically is
being done to an extent.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add missing bch2_moving_ctxt_flush_all()

This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Re-add move_extent_write tracepoint

It appears this was accidentally deleted at some point - also, do a bit
of cleanup.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amount

Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.

This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add .val_to_text() for KEY_TYPE_cookie

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't pass memcmp() as a pointer

Some (buggy!) compilers have issues with this.

Fixes: https://github.com/koverstreet/bcachefs/issues/625
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>