hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header

Declare the TYPE_BONITO_PCI_HOST_BRIDGE QOM type in a
header to be able to access it from board code.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-8-philmd@linaro.org>

hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code

To make it easier to differentiate between the Host Bridge
object and its PCI function #0, rename bonito* as bonito_pci*.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-4-philmd@linaro.org>

hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code

To make it easier to differentiate between the Host Bridge
object and its PCI function #0, rename bonito_pcihost* as
bonito_host*.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-3-philmd@linaro.org>

hw/pci-host/bonito: Convert to 3-phase reset

Convert the TYPE_PCI_BONITO class to use 3-phase reset.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-2-philmd@linaro.org>

softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818

The 'slew' lost tick policy is only available on systems with a mc146818
RTC. On other systems, "-rtc driftfix=slew" is currently silently ignored.
Let's emit at least a warning in this case to make the users aware that
there is something wrong in their command line settings.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230110095351.611724-5-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent

The only reason for this code being target dependent was the IRQ-counting
related code in rtc_policy_slew_deliver_irq(). Since these functions have
been moved into a new, separate file (kvm_irqcount.c) which is now always
compiled and linked if necessary, we can get rid of the #ifdef TARGET_I386
switches in mc146818rtc.c and declare it in the softmmu_ss instead of
specific_ss, so that the code only gets compiled once for all targets.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230110095351.611724-4-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/core/qdev-properties-system: Allow the 'slew' policy only on x86

The 'slew' tick policy is currently enforced to be only available on
x86 via some "#ifdef TARGET_I386" statements in mc146818rtc.c. We
want to get rid of those #ifdefs, so we need a different way of
checking whether the policy is allowed or not. Using the setter
function in hw/core/qdev-properties-system.c seems to be a good
place, so let's add a check here.

Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230110095351.611724-3-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/intc: Extract the IRQ counting functions into a separate file

These IRQ counting functions will soon be required in binaries that
do not include the APIC code, too, so let's extract them into a
separate file that can be linked independently of the APIC code.

While we're at it, change the apic_* prefix into kvm_* since the
functions are used from the i8259 PIC (i.e. not the APIC), too.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230110095351.611724-2-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/intc/i8259: Make using the isa_pic singleton more type-safe

This even spares some casts in hot code paths along the way.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/usb/hcd-uhci: Introduce TYPE_ defines for device models

Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221204190553.3274-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig

Tracking dependencies via Kconfig seems much cleaner.

Note that PIIX4 already depends on ACPI_PIIX4.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230109172347.1830-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific

pci_map_irq_fn's in general seem to be board-specific, and PIIX4's
pci_slot_get_pirq() in particular seems very Malta-specific. So move the
latter to malta.c to 1/ keep the board logic in one place and 2/ avoid
PIIX4 to make assumptions about its board.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific

pci_map_irq_fn's in general seem to be board-specific. So move PIIX3's
pci_slot_get_pirq() to board code to not have PIIX3 make assuptions
about its board.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()

pci_bus_irqs() coupled together the assignment of pci_set_irq_fn and
pci_map_irq_fn to a PCI bus. This coupling gets in the way when the
pci_map_irq_fn is board-specific while the pci_set_irq_fn is device-
specific.

For example, both of QEMU's PIIX south bridge models have different
pci_map_irq_fn implementations which are board-specific rather than
device-specific. These implementations should therefore reside in board
code. The pci_set_irq_fn's, however, should stay in the device models
because they access memory internal to the model.

Factoring out pci_bus_map_irqs() from pci_bus_irqs() allows the
assignments to be decoupled, resolving the problem described above.

Note also how pci_vpb_realize() which gets touched in this commit
assigns different pci_map_irq_fn's depending on the board.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-5-shentey@gmail.com>
[PMD: Factor out in vfu_object_set_bus_irq()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/pci/pci_host: Trace config accesses on unexisting functions

Currently we only emit trace events for existing PCI functions.
In order to ease debugging PCI enumeration process, also emit
for unexisting functions:

  $ qemu-system-foo -trace pci_cfg_\*
  ...
  pci_cfg_read empty 00:0a.4 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0a.5 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0a.6 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0a.7 @0x0 -> 0xffffffff
  pci_cfg_read pcnet 00:0b.0 @0x0 -> 0x20001022
  pci_cfg_read empty 00:0c.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0d.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0e.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0f.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:10.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:11.0 @0x0 -> 0xffffffff
  pci_cfg_read cirrus-vga 00:12.0 @0x0 -> 0xb81013

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-2-philmd@linaro.org>

mips: Always include nanomips disassembler

Since the nanomips disassembler is not C++ code anymore, it need not
depend on link_language == cpp.  Always include it and remove the
CONFIG_NANOMIPS_DIS symbol.

Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110084942.299460-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

mips: Remove support for trap and emulate KVM

This support was limited to the Malta board, drop it.
I do not have a machine that can run VZ KVM, so I am assuming
that it works for -M malta as well.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221221091718.71844-1-philmd@linaro.org>

hw/isa/piix4: Correct IRQRC[A:D] reset values

IRQRC[A:D] registers reset value is 0x80. We were forcing
the MIPS Malta machine routing to be able to boot a Linux
kernel without any bootloader.
We now have these registers initialized in the Malta machine
write_bootloader(), so we can use the correct reset values.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221027204720.33611-4-philmd@linaro.org>

hw/mips/malta: Set PIIX4 IRQ routes in embedded bootloader

Linux kernel expects the northbridge & southbridge chipsets
configured by the BIOS firmware. We emulate that by writing
a tiny bootloader code in write_bootloader().

Upon introduction in commit 5c2b87e34d ("PIIX4 support"),
the PIIX4 configuration space included values specific to
the Malta board.

Set the Malta-specific IRQ routing values in the embedded
bootloader, so the next commit can remove the Malta specific
bits from the PIIX4 PCI-ISA bridge and make it generic
(matching the real hardware).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221027204720.33611-3-philmd@linaro.org>

hw/mips/malta: Introduce PIIX4_PCI_DEVFN definition

The PIIX4 PCI-ISA bridge function is always located at 10:0.
Since we want to re-use its address, add the PIIX4_PCI_DEVFN
definition.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221027204720.33611-2-philmd@linaro.org>

hw/mips/malta: Merge common BL code as bl_setup_gt64120_jump_kernel()

Merge common code shared between write_bootloader() and
write_bootloader_nanomips() into bl_setup_gt64120_jump_kernel().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-12-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (5/5)

Part 5/5: Convert jumping to kernel

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-11-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (4/5)

Part 4/5: Convert GT64120 ISD base address setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-10-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (3/5)

Part 3/5: Convert PCI0 I/O BAR setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-9-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (2/5)

Part 2/5: Convert PCI0 MEM0 BAR setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-8-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (1/5)

Similarly to how commit 0c8427baf0 ("hw/mips/malta: Use bootloader
helper to set BAR registers") converted write_bootloader(), convert
the equivalent write_bootloader_nanomips(), allowing us to modify
the bootloader code more easily in the future.

Part 1/5: Convert PCI0 MEM1 BAR setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-7-philmd@linaro.org>

hw/mips/bootloader: Implement nanoMIPS JALRc opcode generator

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-6-philmd@linaro.org>

hw/mips/bootloader: Implement nanoMIPS LI (LUI+ORI) opcode generator

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-5-philmd@linaro.org>

hw/mips/bootloader: Implement nanoMIPS SW opcode generator

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-4-philmd@linaro.org>

hw/mips/bootloader: Implement nanoMIPS NOP opcode generator

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211204533.85359-3-philmd@linaro.org>

hw/mips/bootloader: Handle buffers as opaque arrays

It is irrelevant to the API what the buffers to fill are made of.
In particular, some MIPS ISA have 16-bit wide instructions.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-2-philmd@linaro.org>

tests/avocado: Add tests booting YAMON ROM on MIPS Malta machines

Add quick tests booting YAMON:

  $ avocado --show=app,console run -t machine:malta tests/avocado/machine_mips_malta.py
   (1/2) tests/avocado/machine_mips_malta.py:MaltaMachine.test_mipsel_malta_yamon:
  console: YAMON ROM Monitor, Revision 02.22.
  console: Copyright (c) 1999-2007 MIPS Technologies, Inc. - All Rights Reserved.
  console: For a list of available commands, type 'help'.
  console: Compilation time =              May 24 2013  12:16:34 (pburton)
  console: Board type/revision =           0x02 (Malta) / 0x00
  console: Core board type/revision =      0x01 (CoreLV) / 0x00
  console: System controller/revision =    Galileo / GT_64120A-B-0
  console: FPGA revision =                 0x0000
  console: MAC address =                   ff.ff.ff.ff.ff.ff
  console: Board S/N =                     0123456789
  console: PCI bus frequency =             33.33 MHz
  console: Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00
  console: Processor ID/revision =         0x93 (MIPS 24Kf) / 0x00
  console: Endianness =                    Little
  console: CPU/Bus frequency =             333 MHz / 419 MHz
  console: Coherency =                     None
  console: Flash memory size =             4 MByte
  console: SDRAM size =                    128 MByte
  console: First free SDRAM address =      0x800c32f0
  console: WARNING: Environment variable flash area is invalid!
  console: HINT   : Perform "erase -e"
  console: YAMON>
  PASS (1.88 s)
   (2/2) tests/avocado/machine_mips_malta.py:MaltaMachine.test_mips64el_malta_yamon:
  ...
  console: System controller/revision =    Galileo / GT_64120A-B-0
  console: Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00
  console: Processor ID/revision =         0x82 (MIPS 20Kc) / 0xa0
  ...
  console: YAMON>
  PASS (1.89 s)
  RESULTS    : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 4.57 s

YAMON does some endian-swapped acceses on the ISD<->PCI CFG/DATA
registers. These tests are useful to debug cross-endianness issues,
in particular on big-endian host.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-7-philmd@linaro.org>

hw/mips/gt64xxx_pci: Move it to hw/pci-host/

The GT-64120 is a north-bridge, and it is not MIPS specific.
Move it with the other north-bridge devices.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221209151533.69516-8-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/meson: Make gt64xxx_pci.c endian-agnostic

The single machine using this device explicitly sets its
endianness. We don't need to set a default. This allow us
to remove the target specificity from the build system.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20221209151533.69516-7-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/malta: Explicit GT64120 endianness upon device creation

Propagate the controller endianess from the machine, setting
the "cpu-little-endian" property.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221209151533.69516-6-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/gt64xxx_pci: Add a 'cpu-little-endian' qdev property

This device does not have to be TARGET-dependent.
Add a 'cpu_big_endian' property which sets the byte-swapping
options if required.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221220113436.14299-5-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/gt64xxx_pci: Manage endian bits with the RegisterFields API

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221220113436.14299-4-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/gt64xxx_pci: Let the GT64120 manage the lower 512MiB hole

Per the comment in the Malta board, the [0x0000.0000-0x2000.0000]
range is decoded by the GT64120, so move the "empty_slot" there.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221209151533.69516-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/Kconfig: Introduce CONFIG_GT64120 to select gt64xxx_pci.c

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221209151533.69516-2-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOps

GT64120's PCI endianness swapping works on little-endian hosts,
but doesn't on big-endian ones. Instead of complicating how
CFGADDR/CFGDATA registers deal with endianness, use the existing
MemoryRegionOps from hw/pci/pci_host.c. Doing so also reduce the
access to internal PCI_HOST_BRIDGE fields.

Map the PCI_HOST_BRIDGE MemoryRegionOps into the corresponding
CFGADDR/CFGDATA regions in the ISD MMIO and remove the unused
code in the current ISD read/write handlers.

Update the mapping when PCI0_CMD register is accessed (in case
the endianness is changed).

This allows using the GT64120 on a big-endian host (and boot
the MIPS Malta machine in little-endian).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-6-philmd@linaro.org>

hw/mips/gt64xxx_pci: Accumulate address space changes

Single registers access in ISD can produce multiple changes
in the address spaces. To reduce computational effort,
accumulate these as a single memory transaction.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-5-philmd@linaro.org>

hw/mips/malta: Trace FPGA LEDs/ASCII display updates

The FPGA LEDs/ASCII display is mostly used by the bootloader
to show very low-level debug info. QEMU connects its output
to a character device backend, which is not very practical
to correlate with ASM instruction executed, interrupts or
MMIO accesses. Also, the display discard the previous states.

To ease bootloader debugging experience, add a pair of trace
events. Such events can be analyzed over time or diff-ed
between different runs.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-4-philmd@linaro.org>

hw/mips/malta: Split FPGA LEDs/ASCII display updates

No need to refresh the ASCII bar when a LED is toggled
(and vice versa).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-3-philmd@linaro.org>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* Atomic memslot updates for KVM (Emanuele, David)
* libvhost-user/libvduse warnings fixes (Marcel)
* i386 TCG fixes (Joe, myself)
* Remove compilation errors when -Werror=maybe-uninitialized (Eric)
* fix GLIB_VERSION for cross-compilation (Paolo)

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmO+hUYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroM5+Qf9HIy2QDdGZJ1fA3AUhp7bCJgotlRF
# 2NMFwo3P/Vwe4qMzzRGkMpsDLFhJx6j1V+sSyeLNxCPtidHccFcmKJOlTqmGeT0k
# HccK07cgAXSZUtvog2xid7PeNpi8OQjKih2Gn/FnN9Tjtad7yMYfXO3O5ttkRV+7
# F8qXBkm4J74l5zs+UMOXUj9y4PudjRFPS0q/lti82eg8mUZ33BZtBkP18Qjq45GM
# wLcemfId0Z6e4s4fmVeTobZ31ltz/B6HDkoD59pQSK6QW2VBIAoO64Hw6FdZnu5W
# PltBsDy5cboKHibkb/ySZQUMhb7UemKFyf7eRWkdlnSSHHFdL/K4x7x7DA==
# =0b+g
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Jan 2023 09:45:42 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (29 commits)
  configure: remove backwards-compatibility code
  target/i386: fix operand size of unary SSE operations
  libvduse: Add extra compiler warnings
  libvhost-user: Add extra compiler warnings
  libvhost-user: Fix assignment in vring_set_avail_event
  libvduse: Fix assignment in vring_set_avail_event
  libvduse: Switch to unsigned int for inuse field in struct VduseVirtq
  libvduse: Provide _GNU_SOURCE when compiling outside of QEMU
  libvhost-user: Change dev->postcopy_ufd assignment to make it C90 compliant
  libvhost-user: Declare uffdio_register early to make it C90 compliant
  libvhost-user: Use unsigned int i for some for-loop iterations
  libvhost-user: Cast rc variable to avoid compiler warning
  libvhost-user: Replace typeof with __typeof__
  libvhost-user: Provide _GNU_SOURCE when compiling outside of QEMU
  hw/display: avoid creating empty loadable modules
  enforce use of G_GNUC_PRINTF attributes
  tests: add G_GNUC_PRINTF for various functions
  util/error: add G_GNUC_PRINTF for various functions
  tools/virtiofsd: add G_GNUC_PRINTF for logging functions
  hw/xen: use G_GNUC_PRINTF/SCANF for various functions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu into staging

hw/nvme updates

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmO+anUACgkQTeGvMW1P
# Del4HAf/eqW92bf04CpXPzLMG38+FoYQgwkH8Lp390JlSM6kjv3DgPM2ygJXIEYr
# dV0KQpTcPRGAVCuXCSOUd6FTkAYdcPVtOeJeYhldEYj9cc9Y/9tvcBMthFBkiCU/
# 66TL7JEgFmOfVMrLypYpfrPHCN0lQVX+i2+Qruospg6itubAKcYdJq+Hx2WWHzcC
# hl/qNgSSIGlhQi21ada1iCUC8Q3TZzo54M+0tW4zfybzsG+eNM+ouKDl/qOHtQgP
# ON/ef9dl+0Dum1l5z7O+sPiXBzZRJR7V+jZOsbf0A98fxqmuu3YacVrH6mY/Zmdx
# e1xexJt6PVXaIKtoZQKRVn2C0ITjXA==
# =AvaO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Jan 2023 07:51:17 GMT
# gpg:                using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [full]
# gpg:                 aka "Klaus Jensen <k.jensen@samsung.com>" [full]
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468  4272 63D5 6FC5 E55D A838
#      Subkey fingerprint: 5228 33AA 75E2 DCE6 A247  66C0 4DE1 AF31 6D4F 0DE9

* tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu:
  hw/nvme: cleanup error reporting in nvme_init_pci()
  hw/nvme: clean up confusing use of errp/local_err
  hw/nvme: fix missing cq eventidx update
  hw/nvme: fix missing endian conversions for doorbell buffers
  hw/nvme: rename shadow doorbell related trace events
  hw/nvme: use QOM accessors

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

configure: remove backwards-compatibility code

The cmd_line.txt mangling is only needed when rebuilding from very old
trees and is kept mostly as an example of how to extend it.  However,
Meson 0.63 introduces a deprecation mechanism for meson_options.txt
that can be used instead, so get rid of our home-grown hack.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: fix operand size of unary SSE operations

VRCPSS, VRSQRTSS and VCVTSx2Sx have a 32-bit or 64-bit memory operand,
which is represented in the decoding tables by X86_VEX_REPScalar.  Add it
to the tables, and make validate_vex() handle the case of an instruction
that is in exception type 4 without the REP prefix and exception type 5
with it; this is the cas of VRCP and VRSQRT.

Reported-by: yongwoo <https://gitlab.com/yongwoo36>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1377
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvduse: Add extra compiler warnings

In case libvhost-user is used externally, that projects compiler
warnings might be more strict. Enforce an extra set of compiler warnings
to catch issues early on.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <08daa1896ad8824e17d57d6a970bc0b4bee73ece.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvhost-user: Add extra compiler warnings

In case libvhost-user is used externally, that projects compiler
warnings might be more strict. Enforce an extra set of compiler warnings
to catch issues early on.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <737ebf2e697f8640558e6f73d96a692711f548f6.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvhost-user: Fix assignment in vring_set_avail_event

Since it was proposed to change the code in libvduse.c to use memcpy
instead of an assignment, the code in libvhost-user.c should also be
changed to use memcpy.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <502b22723264db064e4b05008233a9c1f2f8aaaa.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvduse: Fix assignment in vring_set_avail_event

Since the assignment is causing a compiler warning, fix it by using
memcpy instead.

  CC       libvduse.o
libvduse.c: In function ‘vring_set_avail_event’:
libvduse.c:603:7: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasin]
  603 |     *((uint16_t *)&vq->vring.used->ring[vq->vring.num]) = htole16(val);
      |      ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Xie Yongji <xieyongji@bytedance.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <4a0fe2a6436464473119fdbf0bc4076b36fbb37f.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvduse: Switch to unsigned int for inuse field in struct VduseVirtq

It seems there is no need to keep the inuse field signed and end up with
compiler warnings for sign-compare.

  CC       libvduse.o
libvduse.c: In function ‘vduse_queue_pop’:
libvduse.c:789:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Werror=sign-compare]
  789 |     if (vq->inuse >= vq->vring.num) {
      |                   ^~

Instead of casting the comparison to unsigned int, just make the inuse
field unsigned int in the fist place.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <9fe3fd8b042e048bd04d506ca6e43d738b5c45b7.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvduse: Provide _GNU_SOURCE when compiling outside of QEMU

When the libvduse sources are used by another project, it can not be
guaranteed that _GNU_SOURCE is set by the build system. If it is for
example not set, errors like this show up.

  CC       libvduse.o
libvduse.c: In function ‘vduse_log_get’:
libvduse.c:172:9: error: implicit declaration of function ‘ftruncate’; did you mean ‘strncat’? [-Werror=implicit-function-declaration]
  172 |     if (ftruncate(fd, size) == -1) {
      |         ^~~~~~~~~
      |         strncat

The simplest way to allow external complication of libvduse.[ch] by
setting _GNU_SOURCE if it is not already set by the build system.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <407f3665f0605df936e5bfe60831d180edfb8cca.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvhost-user: Change dev->postcopy_ufd assignment to make it C90 compliant

The assignment of dev->postcopy_ufd can be moved into an else clause and
then the code becomes C90 compliant.

  CC       libvhost-user.o
libvhost-user.c: In function ‘vu_set_postcopy_advise’:
libvhost-user.c:1625:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
 1625 |     struct uffdio_api api_struct;
      |     ^~~~~~

Understandable, it might be desired to avoid else clauses, but in this
case it seems clear enough and frankly the dev->postcopy_ufd is only
assigned once.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <74db52afb1203c4580ffc7fa462b4b2ba260a353.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvhost-user: Declare uffdio_register early to make it C90 compliant

When using libvhost-user source in an external project that wants to
comply with the C90 standard, it is best to declare variables before
code.

  CC       libvhost-user.o
libvhost-user.c: In function ‘generate_faults’:
libvhost-user.c:683:9: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  683 |         struct uffdio_register reg_struct;
      |         ^~~~~~

In this case, it is also simple enough and doesn't cause any extra
ifdef additions.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <556c2d00c01fa134d13c0371d4014c90694c2943.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvhost-user: Use unsigned int i for some for-loop iterations

The sign-compare warning also hits some of the for-loops, but it easy
fixed by just making the iterator variable unsigned int.

  CC       libvhost-user.o
libvhost-user.c: In function ‘vu_gpa_to_va’:
libvhost-user.c:223:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘uint32_t’ {aka ‘unsigned int’} [-Werror=sign-compare]
  223 |     for (i = 0; i < dev->nregions; i++) {
      |                   ^

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <decb925e1a6fb9538738d2570bda2804f888fa15.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvhost-user: Cast rc variable to avoid compiler warning

The assert from recvmsg() return value against an uint32_t size field
from a protocol struct throws a compiler warning.

  CC       libvhost-user.o
In file included from libvhost-user.c:27:
libvhost-user.c: In function ‘vu_message_read_default’:
libvhost-user.c:363:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘uint32_t’ {aka ‘unsigned int’} [-Werror=sign-compare]
  363 |         assert(rc == vmsg->size);
      |                   ^~

This is not critical, but annoying when the libvhost-user source are
used in an external project that has this compiler warning switched on.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <7a791e27b7bd3e0a8b8cc8fbb15090a870d226d5.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvhost-user: Replace typeof with __typeof__

Strictly speaking only -std=gnu99 support the usage of typeof and for
easier inclusion in external projects, it is better to use __typeof__.

  CC       libvhost-user.o
libvhost-user.c: In function ‘vu_log_queue_fill’:
libvhost-user.c:86:13: error: implicit declaration of function ‘typeof’ [-Werror=implicit-function-declaration]
   86 |             typeof(x) _min1 = (x);              \
      |             ^~~~~~

Changing these two users of typeof makes the compiler happy and no extra
flags or pragmas need to be provided.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <981aa822bcaaa2b8d74f245339a99a85c25b346f.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

libvhost-user: Provide _GNU_SOURCE when compiling outside of QEMU

Then the libvhost-user sources are used by another project, it can not
be guaranteed that _GNU_SOURCE is set by the build system. If it is for
example not set, errors like this show up.

  CC       libvhost-user.o
libvhost-user.c: In function ‘vu_panic’:
libvhost-user.c:195:9: error: implicit declaration of function ‘vasprintf’; did you mean ‘vsprintf’? [-Werror=implicit-function-declaration]
  195 |     if (vasprintf(&buf, msg, ap) < 0) {
      |         ^~~~~~~~~
      |         vsprintf

The simplest way to allow external complication of libvhost-user.[ch] is
by setting _GNU_SOURCE if it is not already set by the build system.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <be27dcc747a6b5cc6f8ae3f79e0b79171382bcef.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/display: avoid creating empty loadable modules

When using --disable-virglrenderer, QEMU still creates

  hw-display-virtio-gpu-gl.so
  hw-display-virtio-vga-gl.so
  hw-display-virtio-gpu-pci-gl.so

but when these are loaded, they provide no functionality as the code
which registers types is not compiled in. Funtionally this is
relatively harmless, because QEMU is fine loading a module with no
types.

This is rather confusing for users and OS distro maintainers though,
as they think they have the GL functionality built, but in fact the
module they are looking at provides nothing of value.

The root cause is the use of 'when/if_true' rules when adding sources
to the module source set. If all the rules evaluate to false, then we
have declared the module, but not added anything to it.  We need to
put declaration of the entire module inside a condition based on
existance of the 3rd party library deps that are mandatory.

Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1352
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219125830.2369169-1-berrange@redhat.com>
[Do not check for pixman. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

enforce use of G_GNUC_PRINTF attributes

We've been very gradually adding G_GNUC_PRINTF annotations
to functions over years. This has been useful in detecting
certain malformed printf strings, or cases where we pass
user data as the printf format which is a potential security
flaw.

Given the inherant memory corruption danger in use of format
strings vs mis-matched variadic arguments, it is worth applying
G_GNUC_PRINTF to all functions using printf, even if we know
they are safe.

The compilers can reasonably reliably identify such places
with the -Wsuggest-attribute=format / -Wmissing-format-attribute
flags.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-7-berrange@redhat.com>
[-Wsuggest-attribute=format and -Wmissing-format-attribute are
 synonyms, only include one; disable it for testfloat. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tests: add G_GNUC_PRINTF for various functions

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-6-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

util/error: add G_GNUC_PRINTF for various functions

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221219130205.687815-5-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tools/virtiofsd: add G_GNUC_PRINTF for logging functions

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-4-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/xen: use G_GNUC_PRINTF/SCANF for various functions

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20221219130205.687815-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

disas: add G_GNUC_PRINTF to gstring_printf

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

gitlab: remove redundant setting of PKG_CONFIG_PATH

The PKG_CONFIG_PATH variable is not defined in GitLab CI
envs and even if it was, we don't need to set it to its
existing value.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221103173044.3969425-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

chardev: clean up chardev-parallel.c

Replace HAVE_CHARDEV_PARPORT with a Meson conditional, remove unnecessary
defines, and close the file descriptor on FreeBSD/DragonFly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Remove compilation errors when -Werror=maybe-uninitialized

To avoid compilation errors when -Werror=maybe-uninitialized is used,
add a default case with g_assert_not_reached().

Otherwise with GCC 11.3.1 "cc (GCC) 11.3.1 20220421 (Red Hat 11.3.1-2)"
we get:

../target/i386/ops_sse.h: In function ‘helper_vpermdq_ymm’:
../target/i386/ops_sse.h:2495:13: error: ‘r3’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
     2495 |     d->Q(3) = r3;
          |     ~~~~~~~~^~~~
../target/i386/ops_sse.h:2494:13: error: ‘r2’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
     2494 |     d->Q(2) = r2;
          |     ~~~~~~~~^~~~
../target/i386/ops_sse.h:2493:13: error: ‘r1’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
     2493 |     d->Q(1) = r1;
          |     ~~~~~~~~^~~~
../target/i386/ops_sse.h:2492:13: error: ‘r0’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
     2492 |     d->Q(0) = r0;
          |     ~~~~~~~~^~~~

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221222140158.1260748-1-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: Atomic memslot updates

If we update an existing memslot (e.g., resize, split), we temporarily
remove the memslot to re-add it immediately afterwards. These updates
are not atomic, especially not for KVM VCPU threads, such that we can
get spurious faults.

Let's inhibit most KVM ioctls while performing relevant updates, such
that we can perform the update just as if it would happen atomically
without additional kernel support.

We capture the add/del changes and apply them in the notifier commit
stage instead. There, we can check for overlaps and perform the ioctl
inhibiting only if really required (-> overlap).

To keep things simple we don't perform additional checks that wouldn't
actually result in an overlap -- such as !RAM memory regions in some
cases (see kvm_set_phys_mem()).

To minimize cache-line bouncing, use a separate indicator
(in_ioctl_lock) per CPU.  Also, make sure to hold the kvm_slots_lock
while performing both actions (removing+re-adding).

We have to wait until all IOCTLs were exited and block new ones from
getting executed.

This approach cannot result in a deadlock as long as the inhibitor does
not hold any locks that might hinder an IOCTL from getting finished and
exited - something fairly unusual. The inhibitor will always hold the BQL.

AFAIKs, one possible candidate would be userfaultfd. If a page cannot be
placed (e.g., during postcopy), because we're waiting for a lock, or if the
userfaultfd thread cannot process a fault, because it is waiting for a
lock, there could be a deadlock. However, the BQL is not applicable here,
because any other guest memory access while holding the BQL would already
result in a deadlock.

Nothing else in the kernel should block forever and wait for userspace
intervention.

Note: pause_all_vcpus()/resume_all_vcpus() or
start_exclusive()/end_exclusive() cannot be used, as they either drop
the BQL or require to be called without the BQL - something inhibitors
cannot handle. We need a low-level locking mechanism that is
deadlock-free even when not releasing the BQL.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221111154758.1372674-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: keep track of running ioctls

Using the new accel-blocker API, mark where ioctls are being called
in KVM. Next, we will implement the critical section that will take
care of performing memslots modifications atomically, therefore
preventing any new ioctl from running and allowing the running ones
to finish.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221111154758.1372674-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

accel: introduce accelerator blocker API

This API allows the accelerators to prevent vcpus from issuing
new ioctls while execting a critical section marked with the
accel_ioctl_inhibit_begin/end functions.

Note that all functions submitting ioctls must mark where the
ioctl is being called with accel_{cpu_}ioctl_begin/end().

This API requires the caller to always hold the BQL.
API documentation is in sysemu/accel-blocker.h

Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt
(to minimize cache line bouncing) to keep avoid that new ioctls
run when the critical section starts, and a QemuEvent to wait
that all running ioctls finish.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221111154758.1372674-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

i386: Emit correct error code for 64-bit IDT entry

When in 64-bit mode, IDT entiries are 16 bytes, so `intno * 16` is used
for base/limit/offset calculations. However, even in 64-bit mode, the
exception error code still uses bits [3,16) for the invlaid interrupt
index.

This means the error code should still be `intno * 8 + 2` even in 64-bit
mode.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1382
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: fix GLIB_VERSION for cross-compilation

configure uses "pkg-config" directly so that GLIB_VERSION is always based
on host glib version.   To correctly handle cross-compilation it should use
"$pkg_config" and take GLIB_VERSION from the cross-compiled glib.

Reported-by: Валентин <val15032008@mail.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1414
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/nvme: cleanup error reporting in nvme_init_pci()

Replace the local Error variable with errp and ERRP_GUARD() and change
the return value to bool.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

hw/nvme: clean up confusing use of errp/local_err

Remove an unnecessary local Error value in nvme_realize(). In the
process, change nvme_check_constraints() to return a bool.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

Merge tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu into staging

* s390x header clean-ups from Philippe
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there

# gpg: Signature made Mon 09 Jan 2023 14:21:19 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu:
  .gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job
  error handling: Use RETRY_ON_EINTR() macro where applicable
  Refactoring: refactor TFR() macro to RETRY_ON_EINTR()
  docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst
  i386: Deprecate the -no-hpet QEMU command line option
  tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter
  tests/readconfig: spice doesn't support unix socket on windows yet
  target/s390x: Restrict sysemu/reset.h to system emulation
  target/s390x/tcg/excp_helper: Restrict system headers to sysemu
  target/s390x/tcg/misc_helper: Remove unused "memory.h" include
  hw/s390x/pv: Restrict Protected Virtualization to sysemu
  exec/memory: Expose memory_region_access_valid()
  MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section
  tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts
  qemu-iotests/stream-under-throttle: do not shutdown QEMU

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

.gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job

The qtests are not stable in the msys2-32bit job yet - especially
the test-hmp and the qom-test are failing randomly. Until this is
fixed, let's better disable the qtests here again to avoid failing
CI tests.

Message-Id: <20230105204819.26992-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

error handling: Use RETRY_ON_EINTR() macro where applicable

There is a defined RETRY_ON_EINTR() macro in qemu/osdep.h
which handles the same while loop.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/415
Signed-off-by: Nikita Ivanov <nivanov@cloudlinux.com>
Message-Id: <20221023090422.242617-3-nivanov@cloudlinux.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[thuth: Dropped the hunk that changed socket_accept() in libqtest.c]
Signed-off-by: Thomas Huth <thuth@redhat.com>

Refactoring: refactor TFR() macro to RETRY_ON_EINTR()

Rename macro name to more transparent one and refactor
it to expression.

Signed-off-by: Nikita Ivanov <nivanov@cloudlinux.com>
Message-Id: <20221023090422.242617-2-nivanov@cloudlinux.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst

The file seems to contain perfectly valid rst syntax already, so
rename it to .rst and wire it up in the index.

Message-Id: <20221213101806.46640-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

i386: Deprecate the -no-hpet QEMU command line option

The HPET setting has been turned into a machine property a while ago
already, so we should finally do the next step and deprecate the
legacy CLI option, too.

Message-Id: <20221229114913.260400-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter

We are going to deprecate (and finally remove later) the -no-hpet command
line option. Prepare the bios-tables-test by using the replacement hpet=off
machine parameter instead.

Message-Id: <20230109081205.116369-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/readconfig: spice doesn't support unix socket on windows yet

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230103110814.3726795-6-marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Restrict sysemu/reset.h to system emulation

In user emulation, threads -- implemented as CPU -- are
created/destroyed, but never reset. There is no point in
allowing the user emulation access the sysemu/reset API.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221220145625.26392-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x/tcg/excp_helper: Restrict system headers to sysemu

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-6-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x/tcg/misc_helper: Remove unused "memory.h" include

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/s390x/pv: Restrict Protected Virtualization to sysemu

Protected Virtualization is irrelevant in user emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

exec/memory: Expose memory_region_access_valid()

Instead of having hardware device poking into memory
internal API, expose memory_region_access_valid().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-2-philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section

docs/system/target-mips.rst and configs/targets/mips* are not covered
in our MAINTAINERS file yet, so let's add them now.

Message-Id: <20221212171252.194864-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts

On non-x86_64 host, if KVM is not available we get:

  Traceback (most recent call last):
    File "tests/vm/basevm.py", line 634, in main
      vm = vmcls(args, config=config)
    File "tests/vm/basevm.py", line 104, in __init__
      mem = max(4, args.jobs)
  TypeError: '>' not supported between instances of 'NoneType' and 'int'

Fix by always returning a -- not ideal but safe -- '1' value.

Fixes: b09539444a ("tests/vm: allow us to take advantage of MTTCG")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221209164743.70836-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qemu-iotests/stream-under-throttle: do not shutdown QEMU

Without a kernel or boot disk a QEMU on s390 will exit (usually with a
disabled wait state). This breaks the stream-under-throttle test case.
Do not exit qemu if on s390.

Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20221207131452.8455-1-borntraeger@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Merge tag 'for_upstream' of https://git./virt/kvm/mst/qemu into staging

virtio,pc,pci: features, cleanups, fixes

mostly vhost-vdpa:
    guest announce feature emulation when using shadow virtqueue
    support for configure interrupt
    startup speed ups

an acpi change to only generate cluster node in PPTT when specified for arm

misc fixes, cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 08 Jan 2023 08:01:39 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (50 commits)
  vhost-scsi: fix memleak of vsc->inflight
  acpi: cpuhp: fix guest-visible maximum access size to the legacy reg block
  tests: acpi: aarch64: Add *.topology tables
  tests: acpi: aarch64: Add topology test for aarch64
  tests: acpi: Add and whitelist *.topology blobs
  tests: virt: Update expected ACPI tables for virt test
  hw/acpi/aml-build: Only generate cluster node in PPTT when specified
  tests: virt: Allow changes to PPTT test table
  virtio-pci: fix proxy->vector_irqfd leak in virtio_pci_set_guest_notifiers
  vdpa: commit all host notifier MRs in a single MR transaction
  vhost: configure all host notifiers in a single MR transaction
  vhost: simplify vhost_dev_enable_notifiers
  vdpa: harden the error path if get_iova_range failed
  vdpa-dev: get iova range explicitly
  docs/devel: Rules on #include in headers
  include: Include headers where needed
  include/hw/virtio: Break inclusion loop
  include/hw/cxl: Break inclusion loop cxl_pci.h and cxl_cdat_h
  include/hw/pci: Include hw/pci/pci.h where needed
  include/hw/pci: Split pci_device.h off pci.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/nvme: fix missing cq eventidx update

Prior to reading the shadow doorbell cq head, we have to update the
eventidx. Otherwise, we risk that the driver will skip an mmio doorbell
write. This happens on riscv64, as reported by Guenter.

Adding the missing update to the cq eventidx fixes the issue.

Fixes: 3f7fe8de3d49 ("hw/nvme: Implement shadow doorbell buffer support")
Cc: qemu-stable@nongnu.org
Cc: qemu-riscv@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

hw/nvme: fix missing endian conversions for doorbell buffers

The eventidx and doorbell value are not handling endianness correctly.
Fix this.

Fixes: 3f7fe8de3d49 ("hw/nvme: Implement shadow doorbell buffer support")
Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

hw/nvme: rename shadow doorbell related trace events

Rename the trace events related to writing the event index and reading
the doorbell value to make it more clear that the event is associated
with an actual update (write or read respectively).

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

hw/nvme: use QOM accessors

Replace various ->parent_obj use with the equivalent QOM accessors.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)

# gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
  i386: SGX: remove deprecated member of SGXInfo
  target/i386: Add SGX aex-notify and EDECCSSA support
  util: remove support -chardev tty and -chardev parport
  util: remove support for hex numbers with a scaling suffix
  KVM: remove support for kernel-irqchip=off
  docs: do not talk about past removal as happening in the future
  meson: accept relative symlinks in "meson introspect --installed" data
  meson: cleanup compiler detection
  meson: support meson 0.64 -Doptimization=plain
  configure: test all warnings
  tests/qapi-schema: remove Meson workaround
  meson: cleanup dummy-cpus.c rules
  meson: tweak hardening options for Windows
  configure: remove backwards-compatibility and obsolete options
  configure: preserve qemu-ga variables
  configure: cleanup $cpu tests
  configure: remove dead function
  configure: remove useless write_c_skeleton
  ide: Add "ide-cf" driver, a CompactFlash card
  ide: Add 8-bit data mode
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-tcg-20230106' of https://gitlab.com/rth7680/qemu into staging

tcg/s390x improvements:
 - drop support for pre-z196 cpus (eol before 2017)
 - add support for misc-instruction-extensions-3
 - misc cleanups

# gpg: Signature made Sat 07 Jan 2023 07:47:59 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20230106' of https://gitlab.com/rth7680/qemu: (27 commits)
  tcg/s390x: Avoid the constant pool in tcg_out_movi
  tcg/s390x: Cleanup tcg_out_movi
  tcg/s390x: Tighten constraints for 64-bit compare
  tcg/s390x: Implement ctpop operation
  tcg/s390x: Use tgen_movcond_int in tgen_clz
  tcg/s390x: Support SELGR instruction in movcond
  tcg/s390x: Generalize movcond implementation
  tcg/s390x: Create tgen_cmp2 to simplify movcond
  tcg/s390x: Support MIE3 logical operations
  tcg/s390x: Tighten constraints for and_i64
  tcg/s390x: Tighten constraints for or_i64 and xor_i64
  tcg/s390x: Issue XILF directly for xor_i32
  tcg/s390x: Support MIE2 MGRK instruction
  tcg/s390x: Support MIE2 multiply single instructions
  tcg/s390x: Distinguish RIE formats
  tcg/s390x: Distinguish RRF-a and RRF-c formats
  tcg/s390x: Use LARL+AGHI for odd addresses
  tcg/s390x: Remove DISTINCT_OPERANDS facility check
  tcg/s390x: Remove FAST_BCR_SER facility check
  tcg/s390x: Check for load-on-condition facility at startup
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

vhost-scsi: fix memleak of vsc->inflight

This is below memleak detected when to quit the qemu-system-x86_64 (with
vhost-scsi-pci).

(qemu) quit

=================================================================
==15568==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7f00aec57917 in __interceptor_calloc (/lib64/libasan.so.6+0xb4917)
    #1 0x7f00ada0d7b5 in g_malloc0 (/lib64/libglib-2.0.so.0+0x517b5)
    #2 0x5648ffd38bac in vhost_scsi_start ../hw/scsi/vhost-scsi.c:92
    #3 0x5648ffd38d52 in vhost_scsi_set_status ../hw/scsi/vhost-scsi.c:131
    #4 0x5648ffda340e in virtio_set_status ../hw/virtio/virtio.c:2036
    #5 0x5648ff8de281 in virtio_ioport_write ../hw/virtio/virtio-pci.c:431
    #6 0x5648ff8deb29 in virtio_pci_config_write ../hw/virtio/virtio-pci.c:576
    #7 0x5648ffe5c0c2 in memory_region_write_accessor ../softmmu/memory.c:493
    #8 0x5648ffe5c424 in access_with_adjusted_size ../softmmu/memory.c:555
    #9 0x5648ffe6428f in memory_region_dispatch_write ../softmmu/memory.c:1515
    #10 0x5648ffe8613d in flatview_write_continue ../softmmu/physmem.c:2825
    #11 0x5648ffe86490 in flatview_write ../softmmu/physmem.c:2867
    #12 0x5648ffe86d9f in address_space_write ../softmmu/physmem.c:2963
    #13 0x5648ffe86e57 in address_space_rw ../softmmu/physmem.c:2973
    #14 0x5648fffbfb3d in kvm_handle_io ../accel/kvm/kvm-all.c:2639
    #15 0x5648fffc0e0d in kvm_cpu_exec ../accel/kvm/kvm-all.c:2890
    #16 0x5648fffc90a7 in kvm_vcpu_thread_fn ../accel/kvm/kvm-accel-ops.c:51
    #17 0x56490042400a in qemu_thread_start ../util/qemu-thread-posix.c:505
    #18 0x7f00ac3b6ea4 in start_thread (/lib64/libpthread.so.0+0x7ea4)

Free the vsc->inflight at the 'stop' path.

Fixes: b82526c7ee ("vhost-scsi: support inflight io track")
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Li Feng <fengli@smartx.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20230104160433.21353-1-dongli.zhang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>