drm/amd/display: 3.2.256

DC v3.2.256
Summary:
* Fixes null-deref regression after
  "drm/amd/display: Update OPP counter from new interface"
* Fixes display flashing when VSR and HDR enabled on dcn32
* Fixes dcn3x intermittent hangs due to FPO
* Fixes MST Multi-Stream light up on dcn35
* Fixes green screen on DCN31x when DVI and HDMI monitors attached
* Adds DML2 improvements
* Adds idle power optimization improvements
* Accommodates panels with lower nit backlight
* Updates SDP VSC colorimetry from DP test automation request
* Reverts "drm/amd/display: allow edp updates for virtual signal"

Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add interface to query SubVP status

[Why&How]
To enable automated testing through IGT, expose an API that is
accessible through debugfs to query current status of SubVP feature.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Read before writing Backlight Mode Set Register

[HOW&WHY]
Reading the value from
DP_EDP_BACKLIGHT_MODE_SET_REGISTER, DPCD 0x721
before setting the
BP_EDP_PANEL_LUMINANC_CONTROL_ENABLE bit
to ensure there are no accidental overwrites.

Reviewed-by: Sreeja Golui <sreeja.golui@amd.com>
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable SYMCLK32_SE RCO on DCN314

[WHY]
Currently causes some DP link layer failures, backing out until
the failures are root caused.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix shaper using bad LUT params

[Why]
LUT params are not cleared after setting blend TF, which can lead to
same params being used for the shaper, if the shaper func is bypassed.

[How]
Set lut_params to NULL after program_1dlut.

Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add null check for invalid opps

[Why]
In cases where number of pipes available is less
 than num_opp, there will opp instances that are
 null

[How]
Add null check to skip over these opp instances

Fixes: 40de8403b998 ("drm/amd/display: Update OPP counter from new interface")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update FAMS sequence for DCN30 & DCN32

Provide DCN32 specific sequence and update DCN30 sequence

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix num_ways overflow error

[Why]
Helper function calculates num_ways using 32-bit.  But is
 returned as 8-bit.  If num_ways exceeds 8-bit, then it
 reports back the incorrect num_ways and erroneously
 uses MALL when it should not

[How]
Make returned value 32-bit and convert after it checks
 against caps.cache_num_ways, which is under 8-bit

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add prefix for plane functions

This commit adds the amdgpu_dm_plane_ prefix for all functions in the
amdgpu_dm_plane.c. This change enables an easy way to filter code paths
via ftrace.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add prefix to amdgpu crtc functions

The ftrace debug feature allows filtering functions based on a prefix,
which can be helpful in some complex debug scenarios. The driver can
benefit more from this feature if the function name follows some
patterns; for this reason, this commit adds the prefix amdgpu_dm_crtc_
to all the functions that do not have it in the amdgpu_dm_crtc.c file.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct enum typo

This commit just replaces dc_interrupt_po*r*larity with its correct
name, which is dc_interrupt_polarity.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set emulated sink type to HDMI accordingly.

[WHY & HOW]
Virtual sink is not audio-capable and this causes kms_hdmi_inject's
inject-audio to fail. Set it to HDMI according to EDID.

Reviewed-by: Chao-kai Wang <stylon.wang@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "drm/amd/display: allow edp updates for virtual signal"

This reverts commit 4ad3ee5ccc77aa3f9d702f7b9ad4d9cfeca6c443.

[WHY & HOW]
Virtual signal is not supported as audio capable by DC.

Reviewed-by: Chao-kai Wang <stylon.wang@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix HDMI framepack 3D test issue

[why]
Bandwidth validation failure on framepack tests.
Need to double pixel clock when 3D format is
framepack. Also for HDMI displays, we need to
keep the ITC flag to 1 by default.

[how]
Double the pixel clock when using framepack 3D format.
Set hdmi ITC bit to 1.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix IPS handshake for idle optimizations

[Why]
Intermittent reboot hangs are observed introduced by
"Improve x86 and dmub ips handshake".

[How]
Bring back the commit but fix the polling.

Avoid hanging in place forever by bounding the delay and ensure that
we still message DMCUB on IPS2 exit to notify driver idle has been
cleared.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: implement map dc pipe with callback in DML2

[why]
Unify pipe resource management logic in dc resource layer.

V2:
Add default case for switch.

CC: Hamza Mahfooz <hamza.mahfooz@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add pipe resource management callbacks to DML2

[why]
Need DML2 to support new pipe resource management APIs.

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce default backlight min from 5 nits to 1 nits

[Why & How]
Currently set_default_brightness_aux function uses 5 nits as lower limit
to check for valid default_backlight setting. However some newer panels
can support even lower default settings

Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update SDP VSC colorimetry from DP test automation request

[Why]
Certain test equipment vendors check the SDP VSC for colorimetry against
the value from the test request during certain DP link layer tests for
YCbCr test cases.

[How]
Update SDP VSC with colorimetry from test automation request.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add a check for idle power optimization

[why]
Need a helper function to check idle power is allowed
so that dc doesn't access any registers that are power-gated.

[how]
Implement helper function to check idle power optimization.
Enable a hook to check if detection is allowed.

V2:
Add function hooks for set and get idle states.
Check if function hook was properly initialized.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Choi <nicholas.choi@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "Improve x86 and dmub ips handshake"

This reverts commit 1288d702080949f87688d49dfeeacc99f40adc9b.

Causes intermittent hangs during reboot stress testing.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix MST Multi-Stream Not Lighting Up on dcn35

dcn35 misses .enable_symclk_se hook that makes MST DSC
not functional when having multiple FE clk to be enabled.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Explicitly disable ASPM when dynamic switching disabled

Currently there are separate but related checks:
* amdgpu_device_should_use_aspm()
* amdgpu_device_aspm_support_quirk()
* amdgpu_device_pcie_dynamic_switching_supported()

Simplify into checking whether DPM was enabled or not in the auto
case.  This works because amdgpu_device_pcie_dynamic_switching_supported()
populates that value.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Move AMD_IS_APU check for ASPM into top level function

There is no need for every ASIC driver to perform the same check.
Move the duplicated code into amdgpu_device_should_use_aspm().

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Disable PP_PCIE_DPM_MASK when dynamic speed switching not supported

Rather than individual ASICs checking for the quirk, set the quirk at the
driver level.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd: Use partial migrations in GPU page faults"

This reverts commit dc427a473e5d119232ddb27530920d9796cdea70.

The change prevents migrating the entire range to VRAM because retry
fault restore_pages map the remaining system memory range to GPUs. It
will work correctly to submit together with partial mapping to GPU
patch later.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdkfd:remove unused code"

This reverts commit f9caf6cdd5cc1f4006fd7b6b113658c0b0159f23.

Needed for the next revert patch.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix copyright notice in DC code

[Why & How]
Fix incomplete copyright notice in DC code.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix copyright notice in DML2 code

[Why & How]
Fix incomplete copyright notice in DML2 code.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing copyright notice in DMUB

[Why & How]
Add missing/incomplete copyright notice in DMUB files

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu remove restriction of sriov max_pfn on Vega10

Remove restriction of sriov max_pfn so that TBA and TMA can move to high
47 bits address.

Regression test: change range alloc flag of libdrm as
AMDGPU_VA_RANGE_HIGH and there is no flr occur when testing amdgpu_test
of drm.

Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Address 'remap_list' not described in 'svm_range_add'

Fixes the below:

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2073: warning: Function parameter or member 'remap_list' not described in 'svm_range_add'

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL

In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log:

1. Navigate to the directory: /sys/kernel/debug/dri/0
2. Execute command: cat amdgpu_regs_smc
3. Exception Log::
[4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000
[4005007.702562] #PF: supervisor instruction fetch in kernel mode
[4005007.702567] #PF: error_code(0x0010) - not-present page
[4005007.702570] PGD 0 P4D 0
[4005007.702576] Oops: 0010 [#1] SMP NOPTI
[4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G           OE     5.15.0-43-generic #46-Ubunt       u
[4005007.702590] RIP: 0010:0x0
[4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206
[4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68
[4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000
[4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980
[4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000
[4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000
[4005007.702622] FS:  00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000
[4005007.702626] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0
[4005007.702633] Call Trace:
[4005007.702636]  <TASK>
[4005007.702640]  amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu]
[4005007.703002]  full_proxy_read+0x5c/0x80
[4005007.703011]  vfs_read+0x9f/0x1a0
[4005007.703019]  ksys_read+0x67/0xe0
[4005007.703023]  __x64_sys_read+0x19/0x20
[4005007.703028]  do_syscall_64+0x5c/0xc0
[4005007.703034]  ? do_user_addr_fault+0x1e3/0x670
[4005007.703040]  ? exit_to_user_mode_prepare+0x37/0xb0
[4005007.703047]  ? irqentry_exit_to_user_mode+0x9/0x20
[4005007.703052]  ? irqentry_exit+0x19/0x30
[4005007.703057]  ? exc_page_fault+0x89/0x160
[4005007.703062]  ? asm_exc_page_fault+0x8/0x30
[4005007.703068]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[4005007.703075] RIP: 0033:0x7f5e07672992
[4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f        1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e       c 28 48 89 54 24
[4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992
[4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003
[4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010
[4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000
[4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[4005007.703105]  </TASK>
[4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_       iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t       tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm       i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo       mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v       2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core        drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca
[4005007.703184] CR2: 0000000000000000
[4005007.703188] ---[ end trace ac65a538d240da39 ]---
[4005007.800865] RIP: 0010:0x0
[4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206
[4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68
[4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000
[4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980
[4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000
[4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000
[4005007.800891] FS:  00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000
[4005007.800895] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0

Signed-off-by: Qu Huang <qu.huang@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bypass RAS error reset in some conditions

PMFW is responsible for RAS error reset in some conditions, driver can
skip the operation.

v2: add check for ras->in_recovery, it's set earlier than
amdgpu_in_reset.

v3: fix error in gpu reset check.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable RAS poison mode for APU

Enable it by default on APU platform.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vpe: correct queue stop programing

Otherwise IB test would fail during GPU reset.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DMUB errors introduced by DML2

When DML 2 was introduced, it changed part of the generic sequence of
DC, which caused issues on previous DCNs with DMUB support. This commit
ensures the new sequence only works for new DCNs from 3.5 and above.

Changes since V1:
- Harry: Use the attribute using_dml2 instead of check the DCN version.

Cc: Vitaly Prosyak <vprosyak@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Disable ASPM for VI w/ all Intel systems

Originally we were quirking ASPM disabled specifically for VI when
used with Alder Lake, but it appears to have problems with Rocket
Lake as well.

Like we've done in the case of dpm for newer platforms, disable
ASPM for all Intel systems.

Cc: stable@vger.kernel.org # 5.15+
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Reported-and-tested-by: Paolo Gentili <paolo.gentili@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove power sequencing check

[Why]
Some ASICs keep backlight powered on after dpms off
command has been issued.

[How]
The check for no edp power sequencing was never going to pass.
The value is never changed from what it is set by design.

Cc: stable@vger.kernel.org # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set the DML2 attribute to false in all DCNs older than version 3.5

When DML2 was introduced, it targeted only new DCN versions. For
controlling which ASIC should use this new version of DML, it was
introduced the using_dml2 attribute. To avoid ambiguities, this commit
explicitly sets using_dml2 to false in all ASICs that do not support
DML2.

Cc: Vitaly Prosyak <vprosyak@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix the return value in default case

Fix the return value in default case and drop
redundant 'break'.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add API to get full IP version

Fetch the full version of IP including variant and subrevision.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add tmz support for GC IP v11.5.0

Add tmz support for GC 11.5.0.

Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unneeded dpm features disablement for SMU 14.0.0

PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.

Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: modify if condition in nbio_v7_7.c

remove unnecessary "enable" in if condition.

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix shift out-of-bounds issue

[  567.613292] shift exponent 255 is too large for 64-bit type 'long unsigned int'
[  567.614498] CPU: 5 PID: 238 Comm: kworker/5:1 Tainted: G           OE      6.2.0-34-generic #34~22.04.1-Ubuntu
[  567.614502] Hardware name: AMD Splinter/Splinter-RPL, BIOS WS43927N_871 09/25/2023
[  567.614504] Workqueue: events send_exception_work_handler [amdgpu]
[  567.614748] Call Trace:
[  567.614750]  <TASK>
[  567.614753]  dump_stack_lvl+0x48/0x70
[  567.614761]  dump_stack+0x10/0x20
[  567.614763]  __ubsan_handle_shift_out_of_bounds+0x156/0x310
[  567.614769]  ? srso_alias_return_thunk+0x5/0x7f
[  567.614773]  ? update_sd_lb_stats.constprop.0+0xf2/0x3c0
[  567.614780]  svm_range_split_by_granularity.cold+0x2b/0x34 [amdgpu]
[  567.615047]  ? srso_alias_return_thunk+0x5/0x7f
[  567.615052]  svm_migrate_to_ram+0x185/0x4d0 [amdgpu]
[  567.615286]  do_swap_page+0x7b6/0xa30
[  567.615291]  ? srso_alias_return_thunk+0x5/0x7f
[  567.615294]  ? __free_pages+0x119/0x130
[  567.615299]  handle_pte_fault+0x227/0x280
[  567.615303]  __handle_mm_fault+0x3c0/0x720
[  567.615311]  handle_mm_fault+0x119/0x330
[  567.615314]  ? lock_mm_and_find_vma+0x44/0x250
[  567.615318]  do_user_addr_fault+0x1a9/0x640
[  567.615323]  exc_page_fault+0x81/0x1b0
[  567.615328]  asm_exc_page_fault+0x27/0x30
[  567.615332] RIP: 0010:__get_user_8+0x1c/0x30

Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Suggested-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine ras error kernel log print

refine ras error kernel log to avoid user-ridden ambiguity.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix find ras error node error

the origin function might return the wrong node.

Fixes: 5b1270beb380 ("drm/amdgpu: add ras_err_info to identify RAS error source")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reprogram det size while seamless boot

[Why]
During system boot in second screen only mode on a seamless boot system,
there is a chance that the pipe's det size might not be reset.

[How]
Reset the det size while resetting the pipe during seamless boot.

Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: record mca debug mode in RAS

Call amdgpu_ras_set_mca_debug_mode when we set mca debug mode in smu
v13_0_6.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

usb: typec: altmodes/displayport: fixup drm internal api change vs new user.

usb: typec: altmodes/displayport: Signal hpd low when exiting mode
and
drm: Add HPD state to drm_connector_oob_hotplug_event()

sideswiped each other.

Signal disconnected always.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'amd-drm-next-6.7-2023-10-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.7-2023-10-20:

amdgpu:
- SMU 13 updates
- UMSCH updates
- DC MPO fixes
- RAS updates
- MES 11 fixes
- Fix possible memory leaks in error pathes
- GC 11.5 fixes
- Kernel doc updates
- PSP updates
- APU IMU fixes
- Misc code cleanups
- SMU 11 fixes
- OD fix
- Frame size warning fixes
- SR-IOV fixes
- NBIO 7.11 updates
- NBIO 7.7 updates
- XGMI fixes
- devcoredump updates

amdkfd:
- Misc code cleanups
- SVM fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020195043.4937-1-alexander.deucher@amd.com

Merge tag 'topic/vmemdup-user-array-2023-10-24-1' of git://anongit.freedesktop.org/drm/drm into drm-next

vmemdup-user-array API and changes with it.

This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024010905.646830-1-airlied@redhat.com

Merge tag 'drm-msm-next-2023-10-17' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.7

DP:
- use existing helpers for DPCD handling instead of open-coded functions
- set the subconnector type according to the plugged cable / dongle
  skip validity check for DP CTS EDID checksum

DPU:
- continued migration of feature flags to use core revision checks
- reworked interrupts code to use '0' as NO_IRQ, removed raw IRQ indices
  from log / trace output

gpu:
- a7xx support (a730, a740)
- fixes and additional speedbins for a635, a643

core:
- decouple msm_drv from kms to more cleanly support headless devices (like
  imx5+a2xx)

From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvzkBL2_OgyOeP_b6rVEjrNdfm8jcKzaB04HqHyT5jYwA@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

BackMerge tag 'v6.6-rc7' into drm-next

This is needed to add the msm pr which is based on a higher base.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Linux 6.6-rc7

Merge tag 'phy-fixes-6.6' of git://git./linux/kernel/git/phy/linux-phy

Pull phy fixes from Vinod Koul:

 - mapphone-mdm6600 runtime pm & pinctrl handling fixes

 - Qualcomm qmp usb pcs register fixes, qmp pcie register size warning
   fix, m31 fixes for wrong pointer in PTR_ERR and dropping wrong vreg
   check, qmp combo fix for 8550 power config register

 - realtek usb fix for debugfs_create_dir() and kconfig dependency

* tag 'phy-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: realtek: Realtek PHYs should depend on ARCH_REALTEK
  phy: qualcomm: Fix typos in comments
  phy: qcom-qmp-combo: initialize PCS_USB registers
  phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1
  phy: qcom: m31: Remove unwanted qphy->vreg is NULL check
  phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()
  phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static
  phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
  dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size
  phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
  phy: qcom-qmp-usb: initialize PCS_USB registers
  phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins
  phy: mapphone-mdm6600: Fix runtime PM for remove
  phy: mapphone-mdm6600: Fix runtime disable on probe

Merge tag 'efi-fixes-for-v6.6-3' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:
 "The boot_params pointer fix uses a somewhat ugly extern struct
  declaration but this will be cleaned up the next cycle.

   - don't try to print warnings to the console when it is no longer
     available

   - fix theoretical memory leak in SSDT override handling

   - make sure that the boot_params global variable is set before the
     KASLR code attempts to hash it for 'randomness'

   - avoid soft lockups in the memory acceptance code"

* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
  x86/boot: efistub: Assign global boot_params variable
  efi: fix memory leak in krealloc failure handling
  x86/efistub: Don't try to print after ExitBootService()

Merge tag 'powerpc-6.6-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix stale propagated yield_cpu in qspinlocks leading to lockups

 - Fix broken hugepages on some configs due to ARCH_FORCE_MAX_ORDER

 - Fix a spurious warning when copros are in use at exit time

Thanks to Nicholas Piggin, Christophe Leroy, Nysal Jan K.A Sachin Sant,
and Shrikanth Hegde.

* tag 'powerpc-6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/qspinlock: Fix stale propagated yield_cpu
  powerpc/64s/radix: Don't warn on copros in radix__tlb_flush()
  powerpc/mm: Allow ARCH_FORCE_MAX_ORDER up to 12

Merge tag 'gpio-fixes-for-v6.6-rc7' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - fix interrupt handling in suspend and wakeup in gpio-vf610

 - fix a bug on setting direction to output in gpio-vf610

 - add a missing memset() in gpio ACPI code

* tag 'gpio-fixes-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: acpi: Add missing memset(0) to acpi_get_gpiod_from_data()
  gpio: vf610: set value before the direction to avoid a glitch
  gpio: vf610: mask the gpio irq in system suspend and support wakeup

Merge tag 'rust-fixes-6.6' of https://github.com/Rust-for-Linux/linux

Pull rust fixes from Miguel Ojeda:

 - GCC build: fix bindgen build error with '-fstrict-flex-arrays'

 - Error module: fix the description for 'ECHILD' and fix Markdown
   style nit

 - Code docs: fix logo replacement

 - Docs: update docs output path

 - Kbuild: remove old docs output path in 'cleandocs' target

* tag 'rust-fixes-6.6' of https://github.com/Rust-for-Linux/linux:
  rust: docs: fix logo replacement
  kbuild: remove old Rust docs output path
  docs: rust: update Rust docs output path
  rust: fix bindgen build error with fstrict-flex-arrays
  rust: error: Markdown style nit
  rust: error: fix the description for `ECHILD`

Merge tag 'sched-urgent-2023-10-21' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Ingo Molnar:
 "Fix a recently introduced use-after-free bug"

* tag 'sched-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/eevdf: Fix heap corruption more

Merge tag 'perf-urgent-2023-10-21' of git://git./linux/kernel/git/tip/tip

Pull perf events fix from Ingo Molnar:
 "Fix group event semantics"

* tag 'perf-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Disallow mis-matched inherited group reads

Merge tag 'probes-fixes-v6.6-rc6.2' of git://git./linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - kprobe-events: Fix kprobe events to reject if the attached symbol is
   not unique name because it may not the function which the user want
   to attach to. (User can attach a probe to such symbol using the
   nearest unique symbol + offset.)

 - selftest: Add a testcase to ensure the kprobe event rejects non
   unique symbol correctly.

* tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  selftests/ftrace: Add new test case which checks non unique symbol
  tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols

Merge tag 's390-6.6-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix IOMMU bitmap allocation in s390 PCI to avoid out of bounds access
   when IOMMU pages aren't a multiple of 64

 - Fix kasan crashes when accessing DCSS mapping in memory holes by
   adding corresponding kasan zero shadow mappings

 - Fix a memory leak in css_alloc_subchannel in case
   dma_set_coherent_mask fails

* tag 's390-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix iommu bitmap allocation
  s390/kasan: handle DCSS mapping in memory holes
  s390/cio: fix a memleak in css_alloc_subchannel

Merge tag 'platform-drivers-x86-v6.6-5' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Fix spurious brightness down presses on newer Asus laptop models

 -  Fix backlight control not working on T2 Mac Pro all-in-ones

 -  Add Armin Wolf as new maintainer for the WMI bus driver and change
    its status from orphaned to maintained

 -  A few other small fixes

* tag 'platform-drivers-x86-v6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/mellanox: mlxbf-tmfifo: Fix a warning message
  apple-gmux: Hard Code max brightness for MMIO gmux
  platform/surface: platform_profile: Propagate error if profile registration fails
  platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c events
  platform/x86: asus-wmi: Only map brightness codes when using asus-wmi backlight control
  platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
  platform/x86: wmi: Update MAINTAINERS entry
  platform/x86: msi-ec: Fix the 3rd config
  platform/x86: intel-uncore-freq: Conditionally create attribute for read frequency
  platform: mellanox: Fix a resource leak in an error handling path in probing flow

Merge tag 'usb-6.6-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes and ids from Greg KH:
 "Here are four small patches for USB and Thunderbolt for 6.6-rc7 that
  do the following:

   - new usb-serial device ids

   - thunderbolt driver fix for reported issue

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add Fibocom to DELL custom modem FM101R-GL
  USB: serial: option: add entry for Sierra EM9191 with new firmware
  USB: serial: option: add Telit LE910C4-WWX 0x1035 composition
  thunderbolt: Call tb_switch_put() once DisplayPort bandwidth request is finished

Merge tag 'v6.6-p5' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
 "Fix a 6.5 regression in crypto/asymmetric_keys"

* tag 'v6.6-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  KEYS: asymmetric: Fix sign/verify on pkcs1pad without a hash

Merge tag 'iomap-6.6-fixes-5' of git://git./fs/xfs/xfs-linux

Pull iomap fix from Darrick Wong:

 - Fix a bug where a writev consisting of a bunch of sub-fsblock writes
   where the last buffer address is invalid could lead to an infinite
   loop

* tag 'iomap-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: fix short copy in iomap_write_iter()

Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix regression in reading scale and unit files from sysfs for PMU
   events, so that we can use that info to pretty print instead of
   printing raw numbers:

     # perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2

      Performance counter stats for 'system wide':

                 1.64 Joules power/energy-ram/
                 0.20 Joules power/energy-gpu/

          2.001228914 seconds time elapsed
     #
     # grep -m1 "model name" /proc/cpuinfo
     model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
     #

 - The small llvm.cpp file used to check if the llvm devel files are
   present was incorrectly deleted when removing the BPF event in 'perf
   trace', put it back as it is also used by tools/bpf/bpftool, that
   uses llvm routines to do disassembly of BPF object files.

 - Fix use of addr_location__exit() in dlfilter__object_code(), making
   sure that it is only used to pair a previous addr_location__init()
   call.

* tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  tools build: Fix llvm feature detection, still used by bpftool
  perf dlfilter: Add a test for object_code()
  perf dlfilter: Fix use of addr_location__exit() in dlfilter__object_code()
  perf pmu: Fix perf stat output with correct scale and unit

Merge tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:
 "One single fix to assert check in user_events abi_test to properly
  check bit value on Big Endian architectures. The code treated the bit
  values as Little Endian and the check failed on Big Endian"

* tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/user_events: Fix abi_test for BE archs

Merge tag 'nfs-for-6.6-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client fixes from Anna Schumaker:
 "Stable Fix:
   - Fix a pNFS hang in nfs4_evict_inode()

  Fixes:
   - Force update of suid/sgid bits after an NFS v4.2 ALLOCATE op
   - Fix a potential oops in nfs_inode_remove_request()
   - Check the validity of the layout pointer in ff_layout_mirror_prepare_stats()
   - Fix incorrectly marking the pNFS MDS with USE_PNFS_DS in some cases"

* tag 'nfs-for-6.6-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.1: fixup use EXCHGID4_FLAG_USE_PNFS_DS for DS server
  pNFS/flexfiles: Check the layout validity in ff_layout_mirror_prepare_stats
  pNFS: Fix a hang in nfs4_evict_inode()
  NFS: Fix potential oops in nfs_inode_remove_request()
  nfs42: client needs to strip file mode's suid/sgid bit after ALLOCATE op

Merge tag 'fsnotify_for_v6.6-rc7' of git://git./linux/kernel/git/jack/linux-fs

Pull fanotify fix from Jan Kara:
 "Disable superblock / mount marks for filesystems that can encode file
  handles but not open them (currently only overlayfs).

  It is not clear the functionality is useful in any way so let's better
  disable it before someone comes up with some creative misuse"

* tag 'fsnotify_for_v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: limit reporting of event with non-decodeable file handles

Merge tag 'acpi-6.6-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "These fix the ACPI initialization ordering on ARM and ACPI IRQ
  management in the cases when irq_create_fwspec_mapping() fails.

  Specifics:

   - Fix ACPI initialization ordering on ARM that was changed
     incorrectly during the 6.5 development cycle (Hanjun Guo)

   - Make acpi_register_gsi() return an error code as appropriate when
     irq_create_fwspec_mapping() returns 0 on failure (Sunil V L)"

* tag 'acpi-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Move acpi_arm_init() to the place of after acpi_ghes_init()
  ACPI: irq: Fix incorrect return value in acpi_register_gsi()

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two small fixes, both in drivers.

  The mptsas one is really fixing an error path issue where it can leave
  the misc driver loaded even though the sas driver fails to initialize"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix double free of dsd_list during driver load
  scsi: mpt3sas: Fix in error path

Merge tag 'pinctrl-v6.6-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - Concurrent register updates in the Qualcomm LPASS pin controller gets
   a proper lock.

 - revert a mutex fix that was causing problems: contention on the mutex
   or something of the sort lead to probe reordering and MMC block
   devices start to register in a different order, which unsuspecting
   userspace is not ready to handle

* tag 'pinctrl-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: avoid unsafe code pattern in find_pinctrl()"
  pinctrl: qcom: lpass-lpi: fix concurrent register updates

Merge tag 'mtd/fixes-for-6.6-rc7' of git://git./linux/kernel/git/mtd/linux

Pull MTD fixes from Miquel Raynal:
 "In the raw NAND subsystem, the major fix prevents using cached reads
  with devices not supporting it. There was two bug reports about this.

  Apart from that, three drivers (pl353, arasan and marvell) could
  sometimes hide page program failures due to their their own program
  page helper not being fully compliant with the specification (many
  drivers use the default helpers shared by the core). Adding a missing
  check prevents these situation.

  Finally, the Qualcomm driver had a broken error path.

  In the SPI-NAND subsystem one Micron device used a wrong bitmak
  reporting possibly corrupted ECC status.

  Finally, the physmap-core got stripped from its map_rom fallback by
  mistake, this feature is added back"

* tag 'mtd/fixes-for-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: Ensure the nand chip supports cached reads
  mtd: rawnand: qcom: Unmap the right resource upon probe failure
  mtd: rawnand: pl353: Ensure program page operations are successful
  mtd: rawnand: arasan: Ensure program page operations are successful
  mtd: spinand: micron: correct bitmask for ecc status
  mtd: physmap-core: Restore map_rom fallback
  mtd: rawnand: marvell: Ensure program page operations are successful

Merge tag 'mmc-v6.6-rc3' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Capture correct oemid-bits for eMMC cards
   - Fix error propagation for some ioctl commands
   - Hold retuning if SDIO is in 1-bit mode

  MMC host:
   - mtk-sd: Use readl_poll_timeout_atomic to not "schedule while atomic"
   - sdhci-msm: Correct minimum number of clocks
   - sdhci-pci-gli: Fix LPM negotiation so x86/S0ix SoCs can suspend
   - sdhci-sprd: Fix error code in sdhci_sprd_tuning()"

* tag 'mmc-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Capture correct oemid-bits for eMMC cards
  mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw
  mmc: core: Fix error propagation for some ioctl commands
  mmc: sdhci-sprd: Fix error code in sdhci_sprd_tuning()
  mmc: sdhci-pci-gli: fix LPM negotiation so x86/S0ix SoCs can suspend
  mmc: core: sdio: hold retuning if sdio in 1-bit mode
  dt-bindings: mmc: sdhci-msm: correct minimum number of clocks

drm/amd/display: Fix stack size issue on DML2

This commit is the last part of the fix that reduces the stack size in
the DML2 code.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Chaitanya Dhere <chaitanya.dhere@amd.com>
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce stack size by splitting function

When compiling with allmodconfig, gcc highlights the following error:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c: In function 'dml_core_mode_support':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:8229:1: error: the frame size of 2736 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
 8229 | } // dml_core_mode_support
      | ^
cc1: all warnings being treated as errors

This commit mitigates part of this problem by extracting the prefetch
code to its own function. After applying this commit, the stack size
reduces from 2736 to 2464, however, the stack size issue becomes part of
the new function.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Chaitanya Dhere <chaitanya.dhere@amd.com>
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remap unaligned svm ranges that have split

Split SVM ranges that have been mapped into 2MB page table entries,
require to be remap in case the split has happened in a non-aligned
VA.
[WHY]:
This condition causes the 2MB page table entries be split into 4KB
PTEs.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Create version number for coredumps

Even if there's nothing currently parsing amdgpu's coredump files, if
we eventually have such tools they will be glad to find a version field
to properly read the file.

Create a version number to be displayed on top of coredump file, to be
incremented when the file format or content get changed.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move coredump code to amdgpu_reset file

Giving that we use codedump just for device resets, move it's functions
and structs to a more semantic file, the amdgpu_reset.{c, h}.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Encapsulate all device reset info

To better organize struct amdgpu_device, keep all reset information
related fields together in a separated struct.

Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support the port num info based on the capability flag

XGMI TA will set the capability flag to indicate whether the port_num
info is supported or not. KGD checks the flag and accordingly picks up
the right buffer format and send the right command to TA to retrieve
the info.

v2: simplify the code by reusing the same statement (lijo)

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: prepare the output buffer for GET_PEER_LINKS command

Per the xgmi ta implementation, KGD needs to fill in node_ids
in concern into the shared command output buffer rather than the
command input buffer.

Input buffer is not used for GET_PEER_LINKS command execution.

In this way, xgmi ta can reuse the node info in the output buffer
just filled in and populate the same buffer with link info directly.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop status query/reset for GCEA 9.4.3 and MMEA 1.8

PMFW will be responsible for them.

v2: remove query interfaces.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update the xgmi ta interface header

Update the header file to the v20.00.00.13

v1: rename TA_COMMAND_XGMI__GET_GET_TOPOLOGY_INFO to
TA_COMMAND_XGMI__GET_TOPOLOGY_INFO

And also rename struct ta_xgmi_cmd_get_peer_link_info_output to
ta_xgmi_cmd_get_peer_link_info accordingly

v2: add structs to support xgmi GET_EXTEND_PEER_LINK command

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add set/get mca debug mode operations

Record the debug mode status in RAS.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: replace reset_error_count with amdgpu_ras_reset_error_count

Simplify the code.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add clockgating support for NBIO v7.7.1

add clockgating support for NBIO ip 7.7.1

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix missing stuff in NBIO v7.11

add get_clockgating_state, update_medium_grain_light_sleep and
update_medium_grain_clock_gating in nbio_v7_11_funcs
v1:
add missing funcs in nbio_v7_11.c
v2:
modify the if condition and add spport for nbio v7.11 clockgating.

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable RAS feature by default for APU

Enable RAS feature by default for aqua vanjaram on apu
platform.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo for amdgpu ras error data print

typo fix.

Fixes: 5b1270beb380 ("drm/amdgpu: add ras_err_info to identify RAS error source")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn: Add RB decouple feature under SRIOV - P4

- In VCN 4 SRIOV code path, add code to enable RB decouple feature

Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn: Add RB decouple feature under SRIOV - P3

- Update VCN header for RB decouple feature
- Add metadata struct, metadata will be placed after each RB

Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn: Add RB decouple feature under SRIOV - P2

- Add function to check if RB decouple is enabled under SRIOV

Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vcn: Add RB decouple feature under SRIOV - P1

- Update SRIOV header with RB decouple flag

Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix delete nodes that have been relesed

Fix delete nodes that it has been freed.

Fixes: 5b1270beb380 ("drm/amdgpu: add ras_err_info to identify RAS error source")
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable mca debug mode mode when ras enabled

Enable smu_v13_0_6 mca debug mode if ras is enabled.

Changed from V1:
enable mca debug mode if ras enabled.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>