hw/ppc: Add emulation of Genesi/bPlan Pegasos II

Add new machine called pegasos2 emulating the Genesi/bPlan Pegasos II,
a PowerPC board based on the Marvell MV64361 system controller and the
VIA VT8231 integrated south bridge/superio chips. It can run Linux,
AmigaOS and a wide range of MorphOS versions. Currently a firmware ROM
image is needed to boot and only MorphOS has a video driver to produce
graphics output. Linux could work too but distros that supported this
machine don't include usual video drivers so those only run with
serial console for now.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <30cbfb9cbe6f46a1e15a69a75fac45ac39340122.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

hw/pci-host: Add emulation of Marvell MV64361 PPC system controller

The Marvell Discovery II aka. MV64361 is a PowerPC system controller
chip that is used on the pegasos2 PPC board. This adds emulation of it
that models the device enough to boot guests on this board. The
mv643xx.h header with register definitions is taken from Linux 4.15.10
only fixing white space errors, removing not needed parts and changing
formatting for QEMU coding style.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <79545ebd03bfe0665b73d2d7cbc74fdf3d62629e.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

vt82c686: Add emulation of VT8231 south bridge

Add emulation of VT8231 south bridge ISA part based on the similar
VT82C686B but implemented in a separate subclass that holds the
differences while reusing parts that can be shared.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <10abc9f89854e7c980b9731c33d25a2e307e9c4f.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

vt82c686: Introduce abstract TYPE_VIA_ISA and base vt82c686b_isa on it

To allow reusing ISA bridge emulation for vt8231_isa move the device
state of vt82c686b_isa emulation in an abstract via_isa class. This
change breaks migration back compatibility but this is not an issue
for Fuloong2E machine which is not versioned or migration supported.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <0cb8fc69c7aaa555589181931b881335fecd2ef3.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO

The VT8231 south bridge is very similar to VT82C686B but there are
some differences in register addresses and functionality, e.g. the
VT8231 only has one serial port. This commit adds VT8231_SUPERIO
subclass based on the abstract VIA_SUPERIO class to emulate the
superio part of VT8231.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <8108809321f9ecf3fb1aea22ddaeccc7c3a57c8e.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

vt82c686: QOM-ify superio related functionality

Collect superio functionality and its controlling config registers
handling in an abstract VIA_SUPERIO class that is a subclass of
ISA_SUPERIO and put vt82c686b specific parts in a subclass of this
abstract class.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <fbcc8cc8baf83f327612a1ef1c14bcbcdb0e7edb.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Validate hflags with CONFIG_DEBUG_TCG

Verify that hflags was updated correctly whenever we change
cpu state that is used by hflags.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-11-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

linux-user/ppc: Fix msr updates for signal handling

In save_user_regs, there are two bugs where we OR in a bit number
instead of the bit, clobbering the low bits of MSR.  However:

The MSR_VR and MSR_SPE bits control the availability of the insns.
If the bits were not already set in MSR, then any attempt to access
those registers would result in SIGILL.

For linux-user, we always initialize MSR to the capabilities
of the cpu.  We *could* add checks vs MSR where we currently
check insn_flags and insn_flags2, but we know they match.

Also, there's a stray cut-and-paste comment in restore.

Then, do not force little-endian binaries into big-endian mode.

Finally, use ppc_store_msr for the update to affect hflags.
Which is the reason none of these bugs were previously noticed.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-10-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Remove env->immu_idx and env->dmmu_idx

We weren't recording MSR_GS in hflags, which means that BookE
memory accesses were essentially random vs Guest State.

Instead of adding this bit directly, record the completed mmu
indexes instead.  This makes it obvious that we are recording
exactly the information that we need.

This also means that we can stop directly recording MSR_IR.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-9-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Remove MSR_SA and MSR_AP from hflags

Nothing within the translator -- or anywhere else for that
matter -- checks MSR_SA or MSR_AP on the 602.  This may be
a mistake.  However, for the moment, we need not record these
bits in hflags.

This allows us to simplify HFLAGS_VSX computation by moving
it to overlap with MSR_VSX.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-8-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Put LPCR[GTSE] in hflags

Because this bit was not in hflags, the privilege check
for tlb instructions was essentially random.
Recompute hflags when storing to LPCR.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-7-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Create helper_scv

Perform the test against FSCR_SCV at runtime, in the helper.

This means we can remove the incorrect set against SCV in
ppc_tr_init_disas_context and do not need to add an HFLAGS bit.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-6-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Put dbcr0 single-step bits into hflags

Because these bits were not in hflags, the code generated
for single-stepping on BookE was essentially random.
Recompute hflags when storing to dbcr0.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-5-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Reduce env->hflags to uint32_t

It will be stored in tb->flags, which is also uint32_t,
so let's use the correct size.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-4-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Disconnect hflags from MSR

Copying flags directly from msr has drawbacks: (1) msr bits
mean different things per cpu, (2) msr has 64 bits on 64 cpus
while tb->flags has only 32 bits.

Create a enum to define these bits.  Document the origin of each bit
and validate those bits that must match MSR.  This fixes the
truncation of env->hflags to tb->flags, because we no longer
have hflags bits set above bit 31.

Most of the code in ppc_tr_init_disas_context is moved over to
hreg_compute_hflags.  Some of it is simple extractions from msr,
some requires examining other cpu flags.  Anything that is moved
becomes a simple extract from hflags in ppc_tr_init_disas_context.

Several existing bugs are left in ppc_tr_init_disas_context, where
additional changes are required -- to be addressed in future patches.

Remove a broken #if 0 block.

Reported-by: Ivan Warren <ivan@vmfacility.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-3-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Extract post_load_update_msr

Extract post_load_update_msr to share between cpu_load_old
and cpu_post_load in updating the msr.

Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-2-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

hw/ppc/spapr_rtas: Update hflags after setting msr

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-16-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

hw/ppc/pnv_core: Update hflags after setting msr

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-15-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Fix comment for MSR_FE{0,1}

As per hreg_compute_hflags:

  We 'forget' FE0 & FE1: we'll never generate imprecise exceptions

remove the hflags marker from the respective comments.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-7-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Retain hflags_nmsr only for migration

We have eliminated all normal uses of hflags_nmsr.  We need
not even compute it except when we want to migrate.  Rename
the field to emphasize this.

Remove the fixme comment for migrating access_type.  This value
is only ever used with the current executing instruction, and
is never live when the cpu is halted for migration.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-6-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Do not call hreg_compute_mem_idx after ppc_store_msr

In ppc_store_msr we call hreg_compute_hflags, which itself
calls hreg_compute_mem_idx.  Rely on ppc_store_msr to update
everything required by the msr update.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-5-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Properly sync cpu state with new msr in cpu_load_old

Match cpu_post_load in using ppc_store_msr to set all of
the cpu state implied by the value of msr.  Do not restore
hflags or hflags_nmsr, as we recompute them in ppc_store_msr.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-4-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Move 601 hflags adjustment to hreg_compute_hflags

Keep all hflags computation in one place, as this will be
especially important later.

Introduce a new POWERPC_FLAG_HID0_LE bit to indicate when
LE should be taken from HID0.  This appears to be set if
and only if POWERPC_FLAG_RTC_CLK is set, but we're not
short of bits and having both names will avoid confusion.

Note that this was the only user of hflags_nmsr, so we can
perform a straight assignment rather than mask and set.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-3-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Move helper_regs.h functions out-of-line

Move the functions to a new file, helper_regs.c.

Note int_helper.c was relying on helper_regs.h to
indirectly include qemu/log.h.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210315184615.1985590-2-richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

hw/ppc/mac_newworld: Restrict RAM to 2 GiB

On Mac99 and newer machines, the Uninorth PCI host bridge maps
the PCI hole region at 2GiB, so the RAM area beside 2GiB is not
accessible by the CPU. Restrict the memory to 2GiB to avoid
problems such the one reported in the buglink.

Buglink: https://bugs.launchpad.net/qemu/+bug/1922391
Reported-by: Håvard Eidnes <he@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210406084842.2859664-1-f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-hex-20210502' into staging

Minor cleanups.
Finish the rest of the hexagon integer instructions.

# gpg: Signature made Sun 02 May 2021 15:38:17 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-hex-20210502: (31 commits)
  Hexagon (target/hexagon) CABAC decode bin
  Hexagon (target/hexagon) load into shifted register instructions
  Hexagon (target/hexagon) load and unpack bytes instructions
  Hexagon (target/hexagon) bit reverse (brev) addressing
  Hexagon (target/hexagon) circular addressing
  Hexagon (target/hexagon) add A4_addp_c/A4_subp_c
  Hexagon (target/hexagon) add A6_vminub_RdP
  Hexagon (target/hexagon) add A5_ACS (vacsh)
  Hexagon (target/hexagon) add F2_sfinvsqrta
  Hexagon (target/hexagon) add F2_sfrecipa instruction
  Hexagon (target/hexagon) compile all debug code
  Hexagon (target/hexagon) move QEMU_GENERATE to only be on during macros.h
  Hexagon (target/hexagon) cleanup reg_field_info definition
  Hexagon (target/hexagon) cleanup ternary operators in semantics
  Hexagon (target/hexagon) use softfloat for float-to-int conversions
  Hexagon (target/hexagon) replace float32_mul_pow2 with float32_scalbn
  Hexagon (target/hexagon) use softfloat default NaN and tininess
  Hexagon (target/hexagon) change type of softfloat_roundingmodes
  Hexagon (target/hexagon) remove unused carry_from_add64 function
  Hexagon (target/hexagon) change variables from int to bool when appropriate
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210501' into staging

Include cleanups.
Decodetree enhancements for power10.

# gpg: Signature made Sat 01 May 2021 19:50:22 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210501:
  decodetree: Extend argument set syntax to allow types
  decodetree: Add support for 64-bit instructions
  decodetree: More use of f-strings
  decodetree: Introduce whex and whexC helpers
  exec: Remove accel/tcg/ from include paths

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Hexagon (target/hexagon) CABAC decode bin

The following instruction is added
    S2_cabacdecbin            Rdd32=decbin(Rss32,Rtt32)

Test cases added to tests/tcg/hexagon/misc.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-27-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) load into shifted register instructions

The following instructions are added
    L2_loadalignb_io          Ryy32 = memb_fifo(Rs32+#s11:1)
    L2_loadalignh_io          Ryy32 = memh_fifo(Rs32+#s11:1)
    L4_loadalignb_ur          Ryy32 = memb_fifo(Rt32<<#u2+#U6)
    L4_loadalignh_ur          Ryy32 = memh_fifo(Rt32<<#u2+#U6)
    L4_loadalignb_ap          Ryy32 = memb_fifo(Re32=#U6)
    L4_loadalignh_ap          Ryy32 = memh_fifo(Re32=#U6)
    L2_loadalignb_pr          Ryy32 = memb_fifo(Rx32++Mu2)
    L2_loadalignh_pr          Ryy32 = memh_fifo(Rx32++Mu2)
    L2_loadalignb_pbr         Ryy32 = memb_fifo(Rx32++Mu2:brev)
    L2_loadalignh_pbr         Ryy32 = memh_fifo(Rx32++Mu2:brev)
    L2_loadalignb_pi          Ryy32 = memb_fifo(Rx32++#s4:1)
    L2_loadalignh_pi          Ryy32 = memh_fifo(Rx32++#s4:1)
    L2_loadalignb_pci         Ryy32 = memb_fifo(Rx32++#s4:1:circ(Mu2))
    L2_loadalignh_pci         Ryy32 = memh_fifo(Rx32++#s4:1:circ(Mu2))
    L2_loadalignb_pcr         Ryy32 = memb_fifo(Rx32++I:circ(Mu2))
    L2_loadalignh_pcr         Ryy32 = memh_fifo(Rx32++I:circ(Mu2))

Test cases in tests/tcg/hexagon/load_align.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-26-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) load and unpack bytes instructions

The following instructions are added
    L2_loadbzw2_io          Rd32 = memubh(Rs32+#s11:1)
    L2_loadbzw4_io          Rdd32 = memubh(Rs32+#s11:1)
    L2_loadbsw2_io          Rd32 = membh(Rs32+#s11:1)
    L2_loadbsw4_io          Rdd32 = membh(Rs32+#s11:1)

    L4_loadbzw2_ur          Rd32 = memubh(Rt32<<#u2+#U6)
    L4_loadbzw4_ur          Rdd32 = memubh(Rt32<<#u2+#U6)
    L4_loadbsw2_ur          Rd32 = membh(Rt32<<#u2+#U6)
    L4_loadbsw4_ur          Rdd32 = membh(Rt32<<#u2+#U6)

    L4_loadbzw2_ap          Rd32 = memubh(Re32=#U6)
    L4_loadbzw4_ap          Rdd32 = memubh(Re32=#U6)
    L4_loadbsw2_ap          Rd32 = membh(Re32=#U6)
    L4_loadbsw4_ap          Rdd32 = membh(Re32=#U6)

    L2_loadbzw2_pr          Rd32 = memubh(Rx32++Mu2)
    L2_loadbzw4_pr          Rdd32 = memubh(Rx32++Mu2)
    L2_loadbsw2_pr          Rd32 = membh(Rx32++Mu2)
    L2_loadbsw4_pr          Rdd32 = membh(Rx32++Mu2)

    L2_loadbzw2_pbr         Rd32 = memubh(Rx32++Mu2:brev)
    L2_loadbzw4_pbr         Rdd32 = memubh(Rx32++Mu2:brev)
    L2_loadbsw2_pbr         Rd32 = membh(Rx32++Mu2:brev)
    L2_loadbsw4_pbr         Rdd32 = membh(Rx32++Mu2:brev)

    L2_loadbzw2_pi          Rd32 = memubh(Rx32++#s4:1)
    L2_loadbzw4_pi          Rdd32 = memubh(Rx32++#s4:1)
    L2_loadbsw2_pi          Rd32 = membh(Rx32++#s4:1)
    L2_loadbsw4_pi          Rdd32 = membh(Rx32++#s4:1)

    L2_loadbzw2_pci         Rd32 = memubh(Rx32++#s4:1:circ(Mu2))
    L2_loadbzw4_pci         Rdd32 = memubh(Rx32++#s4:1:circ(Mu2))
    L2_loadbsw2_pci         Rd32 = membh(Rx32++#s4:1:circ(Mu2))
    L2_loadbsw4_pci         Rdd32 = membh(Rx32++#s4:1:circ(Mu2))

    L2_loadbzw2_pcr         Rd32 = memubh(Rx32++I:circ(Mu2))
    L2_loadbzw4_pcr         Rdd32 = memubh(Rx32++I:circ(Mu2))
    L2_loadbsw2_pcr         Rd32 = membh(Rx32++I:circ(Mu2))
    L2_loadbsw4_pcr         Rdd32 = membh(Rx32++I:circ(Mu2))

Test cases in tests/tcg/hexagon/load_unpack.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-25-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) bit reverse (brev) addressing

The following instructions are added
    L2_loadrub_pbr          Rd32 = memub(Rx32++Mu2:brev)
    L2_loadrb_pbr           Rd32 = memb(Rx32++Mu2:brev)
    L2_loadruh_pbr          Rd32 = memuh(Rx32++Mu2:brev)
    L2_loadrh_pbr           Rd32 = memh(Rx32++Mu2:brev)
    L2_loadri_pbr           Rd32 = memw(Rx32++Mu2:brev)
    L2_loadrd_pbr           Rdd32 = memd(Rx32++Mu2:brev)
    S2_storerb_pbr          memb(Rx32++Mu2:brev).=.Rt32
    S2_storerh_pbr          memh(Rx32++Mu2:brev).=.Rt32
    S2_storerf_pbr          memh(Rx32++Mu2:brev).=.Rt.H32
    S2_storeri_pbr          memw(Rx32++Mu2:brev).=.Rt32
    S2_storerd_pbr          memd(Rx32++Mu2:brev).=.Rt32
    S2_storerinew_pbr       memw(Rx32++Mu2:brev).=.Nt8.new
    S2_storerbnew_pbr       memw(Rx32++Mu2:brev).=.Nt8.new
    S2_storerhnew_pbr       memw(Rx32++Mu2:brev).=.Nt8.new

Test cases in tests/tcg/hexagon/brev.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-24-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) circular addressing

The following instructions are added
    L2_loadrub_pci          Rd32 = memub(Rx32++#s4:0:circ(Mu2))
    L2_loadrb_pci           Rd32 = memb(Rx32++#s4:0:circ(Mu2))
    L2_loadruh_pci          Rd32 = memuh(Rx32++#s4:1:circ(Mu2))
    L2_loadrh_pci           Rd32 = memh(Rx32++#s4:1:circ(Mu2))
    L2_loadri_pci           Rd32 = memw(Rx32++#s4:2:circ(Mu2))
    L2_loadrd_pci           Rdd32 = memd(Rx32++#s4:3:circ(Mu2))
    S2_storerb_pci          memb(Rx32++#s4:0:circ(Mu2)) = Rt32
    S2_storerh_pci          memh(Rx32++#s4:1:circ(Mu2)) = Rt32
    S2_storerf_pci          memh(Rx32++#s4:1:circ(Mu2)) = Rt.H32
    S2_storeri_pci          memw(Rx32++#s4:2:circ(Mu2)) = Rt32
    S2_storerd_pci          memd(Rx32++#s4:3:circ(Mu2)) = Rtt32
    S2_storerbnew_pci       memb(Rx32++#s4:0:circ(Mu2)) = Nt8.new
    S2_storerhnew_pci       memw(Rx32++#s4:1:circ(Mu2)) = Nt8.new
    S2_storerinew_pci       memw(Rx32++#s4:2:circ(Mu2)) = Nt8.new
    L2_loadrub_pcr          Rd32 = memub(Rx32++I:circ(Mu2))
    L2_loadrb_pcr           Rd32 = memb(Rx32++I:circ(Mu2))
    L2_loadruh_pcr          Rd32 = memuh(Rx32++I:circ(Mu2))
    L2_loadrh_pcr           Rd32 = memh(Rx32++I:circ(Mu2))
    L2_loadri_pcr           Rd32 = memw(Rx32++I:circ(Mu2))
    L2_loadrd_pcr           Rdd32 = memd(Rx32++I:circ(Mu2))
    S2_storerb_pcr          memb(Rx32++I:circ(Mu2)) = Rt32
    S2_storerh_pcr          memh(Rx32++I:circ(Mu2)) = Rt32
    S2_storerf_pcr          memh(Rx32++I:circ(Mu2)) = Rt32.H32
    S2_storeri_pcr          memw(Rx32++I:circ(Mu2)) = Rt32
    S2_storerd_pcr          memd(Rx32++I:circ(Mu2)) = Rtt32
    S2_storerbnew_pcr       memb(Rx32++I:circ(Mu2)) = Nt8.new
    S2_storerhnew_pcr       memh(Rx32++I:circ(Mu2)) = Nt8.new
    S2_storerinew_pcr       memw(Rx32++I:circ(Mu2)) = Nt8.new

Test cases in tests/tcg/hexagon/circ.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-23-git-send-email-tsimpson@quicinc.com>
[rth: Squash <1619667142-29636-1-git-send-email-tsimpson@quicinc.com>
removing gen_read_reg and gen_set_byte to avoid clang Werror.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

decodetree: Extend argument set syntax to allow types

Rather than force all structure members to be 'int',
allow the type of the member to be specified.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

decodetree: Add support for 64-bit instructions

Allow '64' to be specified for the instruction width command line params
and use the appropriate extract and deposit functions in that case.

This will be used to implement the new 64-bit Power ISA 3.1 instructions.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <CP2PR80MB3668E123E2EFDB0ACD3A46F1DA759@CP2PR80MB3668.lamprd80.prod.outlook.com>
[rth: Drop the change to the field type; use bitop_width instead of separate
variables for extract/deposit; use "ull" for 64-bit constants.]
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

decodetree: More use of f-strings

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

decodetree: Introduce whex and whexC helpers

Form a hex constant of the appropriate insnwidth.
Begin using f-strings on changed lines.

Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

exec: Remove accel/tcg/ from include paths

When TCG is enabled, the accel/tcg/ include path is added to the
project global include search list. This accel/tcg/ directory
contains a header named "internal.h" which, while intented to
be internal to accel/tcg/, is accessible by all files compiled
when TCG is enabled. This might lead to problem with other
directories using the same "internal.h" header name:

  $ git ls-files | fgrep /internal.h
  accel/tcg/internal.h
  include/hw/ide/internal.h
  target/hexagon/internal.h
  target/mips/internal.h
  target/ppc/internal.h
  target/s390x/internal.h

As we don't need to expose accel/tcg/ internals to the rest of
the code base, simplify by removing it from the include search
list, and include the accel/tcg/ public headers relative to the
project root search path (which is already in the generic include
search path).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210413081008.3409459-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) add A4_addp_c/A4_subp_c

Rdd32 = add(Rss32, Rtt32, Px4):carry
    Add with carry
Rdd32 = sub(Rss32, Rtt32, Px4):carry
    Sub with carry

Test cases in tests/tcg/hexagon/multi_result.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-22-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) add A6_vminub_RdP

Rdd32,Pe4 = vminub(Rtt32, Rss32)
    Vector min of bytes

Test cases in tests/tcg/hexagon/multi_result.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-21-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) add A5_ACS (vacsh)

Rxx32,Pe4 = vacsh(Rss32, Rtt32)
    Add compare and select elements of two vectors

Test cases in tests/tcg/hexagon/multi_result.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-20-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) add F2_sfinvsqrta

Rd32,Pe4 = sfinvsqrta(Rs32)
    Square root approx

The helper packs the 2 32-bit results into a 64-bit value,
and the fGEN_TCG override unpacks them into the proper results.

Test cases in tests/tcg/hexagon/multi_result.c
FP exception tests added to tests/tcg/hexagon/fpstuff.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-19-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) add F2_sfrecipa instruction

Rd32,Pe4 = sfrecipa(Rs32, Rt32)
    Recripocal approx

Test cases in tests/tcg/hexagon/multi_result.c
FP exception tests added to tests/tcg/hexagon/fpstuff.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-18-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) compile all debug code

Change #if HEX_DEBUG to if (HEX_DEBUG) so the debug code doesn't bit rot

Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-17-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) move QEMU_GENERATE to only be on during macros.h

Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-16-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) cleanup reg_field_info definition

Include size in declaration
Remove {0, 0} entry

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-15-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) cleanup ternary operators in semantics

Change  (cond ? (res = x) : (res = y)) to res = (cond ? x : y)

This makes the semnatics easier to for idef-parser to deal with

The following instructions are impacted
    C2_any8
    C2_all8
    C2_mux
    C2_muxii
    C2_muxir
    C2_muxri

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-14-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) use softfloat for float-to-int conversions

Use the proper return for helpers that convert to unsigned
Remove target/hexagon/conv_emu.[ch]

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-13-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) replace float32_mul_pow2 with float32_scalbn

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-12-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) use softfloat default NaN and tininess

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-11-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) change type of softfloat_roundingmodes

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-10-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) remove unused carry_from_add64 function

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-9-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) change variables from int to bool when appropriate

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-8-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) decide if pred has been written at TCG gen time

Multiple writes to the same preg are and'ed together.  Rather than
generating a runtime check, we can determine at TCG generation time
if the predicate has previously been written in the packet.

Test added to tests/tcg/hexagon/misc.c

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-7-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) properly generate TB end for DISAS_NORETURN

When exiting a TB, generate all the code before returning from
hexagon_tr_translate_packet so that nothing needs to be done in
hexagon_tr_tb_stop.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-6-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) use env_archcpu and env_cpu

Remove hexagon_env_get_cpu and replace with env_archcpu
Replace CPU(hexagon_env_get_cpu(env)) with env_cpu(env)

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-5-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) remove unnecessary inline directives

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-4-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) cleanup gen_log_predicated_reg_write_pair

Similar to previous cleanup of gen_log_predicated_reg_write

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-3-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) TCG generation cleanup

Simplify TCG generation of hex_reg_written

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-2-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hexagon: remove unnecessary semicolons

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reported-by: Richard Henderson <<richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1615784100-26459-1-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hexagon: fix typo in comment

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1615784115-26559-1-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hexagon: Change DECODE_MAPPED_REG operand name to OPNUM

Reported-by: Richard Henderson <<richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1615784049-26215-1-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hexagon: remove unnecessary checks in find_iclass_slots

Reported-by: Richard Henderson <<richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1615784037-26129-1-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hexagon: translation changes

Change cpu_ldl_code to translator_ldl.
Don't end the TB after every packet when HEX_DEBUG is on.
Make gen_check_store_width a simple call.

Reported-by: Richard Henderson <<richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1615783984-25918-1-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-04-30' into staging

QAPI patches patches for 2021-04-30

# gpg: Signature made Fri 30 Apr 2021 12:42:32 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2021-04-30: (25 commits)
  qapi/error.py: enable mypy checks
  qapi/error: Add type hints
  qapi/error.py: enable pylint checks
  qapi/error.py: move QAPIParseError to parser.py
  qapi/error: assert QAPISourceInfo is not None
  qapi/error: Make QAPISourceError 'col' parameter optional
  qapi/error: Use Python3-style super()
  qapi/error: Repurpose QAPIError as an abstract base exception class
  qapi/expr: Update authorship and copyright information
  qapi/expr.py: Use tuples instead of lists for static data
  qapi/expr.py: Add docstrings
  qapi/expr: Only explicitly prohibit 'Kind' nor 'List' for type names
  qapi/expr.py: enable pylint checks
  qapi/expr.py: Remove single-letter variable
  qapi/expr.py: Consolidate check_if_str calls in check_if
  qapi/expr.py: add type hint annotations
  qapi/expr.py: Modify check_keys to accept any Collection
  qapi/expr.py: Add casts in a few select cases
  qapi/expr.py: Check type of union and alternate 'data' member
  qapi/expr.py: move string check upwards in check_type
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Fix permission update order problems with block graph changes
- qemu-img convert: Unshare write permission for source
- vhost-user-blk: Fail gracefully on too large queue size

# gpg: Signature made Fri 30 Apr 2021 11:27:51 BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (39 commits)
  vhost-user-blk: Fail gracefully on too large queue size
  qemu-img convert: Unshare write permission for source
  block: Add BDRV_O_NO_SHARE for blk_new_open()
  block: refactor bdrv_node_check_perm()
  block: rename bdrv_replace_child_safe() to bdrv_replace_child()
  block: refactor bdrv_child_set_perm_safe() transaction action
  block: inline bdrv_replace_child()
  block: inline bdrv_check_perm_common()
  block: drop unused permission update functions
  block: bdrv_reopen_multiple: refresh permissions on updated graph
  block: bdrv_reopen_multiple(): move bdrv_flush to separate pre-prepare
  block: add bdrv_set_backing_noperm() transaction action
  block: make bdrv_refresh_limits() to be a transaction action
  block: make bdrv_unset_inherits_from to be a transaction action
  block: drop ignore_children for permission update functions
  block/backup-top: drop .active
  block: introduce bdrv_drop_filter()
  block: add bdrv_remove_filter_or_cow transaction action
  block: adapt bdrv_append() for inserting filters
  block: split out bdrv_replace_node_noperm()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qapi/error.py: enable mypy checks

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/error: Add type hints

No functional change.

Note: QAPISourceError's info parameter is Optional[] because schema.py
treats the info property of its various classes as Optional to
accommodate built-in types, which have no source. See prior commit
'qapi/error: assert QAPISourceInfo is not None'.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/error.py: enable pylint checks

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/error.py: move QAPIParseError to parser.py

Keeping it in error.py will create some cyclic import problems when we
add types to the QAPISchemaParser. Callers don't need to know the
details of QAPIParseError unless they are parsing or dealing directly
with the parser, so this won't create any harsh new requirements for
callers in the general case.

Update error.py with a little docstring that gives a nod to where the
error may now be found.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/error: assert QAPISourceInfo is not None

Built-in stuff is not parsed from a source file, and therefore have no
QAPISourceInfo. If such None info was used for reporting an error,
built-in stuff would be broken. Programming error. Instead of reporting
a confusing error with bogus source location then, we better crash.

We currently crash only if self.col was set. Assert that self.info is
not None in order to crash reliably.

We can not yet change the type of the initializer to prove this cannot
happen at static analysis time before the remainder of the code is fully
typed.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/error: Make QAPISourceError 'col' parameter optional

It's already treated as optional, with one direct caller and some
subclass callers passing 'None'. Make it officially optional, which
requires moving the position of the argument to come after all required
parameters.

QAPISemError becomes functionally identical to QAPISourceError. Keep the
name to preserve its semantic meaning and avoid code churn, but remove
the now-useless __init__ wrapper.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/error: Use Python3-style super()

Missed in commit 2cae67bcb5 "qapi: Use super() now we have Python 3".

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210421192233.3542904-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/error: Repurpose QAPIError as an abstract base exception class

Rename QAPIError to QAPISourceError, and then create a new QAPIError
class that serves as the basis for all of our other custom exceptions,
without specifying any class properties.

This leaves QAPIError as a package-wide error class that's suitable for
any current or future errors.

(Right now, we don't have any errors that DON'T also want to specify a
Source location, but this MAY change. In these cases, a common abstract
ancestor would be desired.)

Add docstrings to explain the intended function of each error class.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr: Update authorship and copyright information

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Use tuples instead of lists for static data

It is -- maybe -- possibly -- three nanoseconds faster.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Add docstrings

Now with more :words:!

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr: Only explicitly prohibit 'Kind' nor 'List' for type names

Per list review: qapi-code-gen.txt reserves suffixes Kind and
List only for type names, but the code rejects them for events and
commands, too.

It turns out we reject them earlier anyway: In check_name_upper() for
event names, and in check_name_lower() for command names.

Still, adjust the code for clarity over what precisely we are guarding
against.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: enable pylint checks

Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Remove single-letter variable

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Consolidate check_if_str calls in check_if

This is a small rewrite to address some minor style nits.

Don't compare against the empty list to check for the empty condition, and
move the normalization forward to unify the check on the now-normalized
structure.

With the check unified, the local nested function isn't needed anymore
and can be brought down into the normal flow of the function. With the
nesting level changed, shuffle the error strings around a bit to get
them to fit in 79 columns.

Note: although ifcond is typed as Sequence[str] elsewhere, we *know* that
the parser will produce real, bona-fide lists. It's okay to check
isinstance(ifcond, list) here.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: add type hint annotations

Annotations do not change runtime behavior.
This commit *only* adds annotations.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Modify check_keys to accept any Collection

This is a minor adjustment that lets parameters @required and
@optional take tuple arguments, in particular ().  Later patches will
make use of that.

(Iterable would also have worked, but Iterable also includes things like
generator expressions which are consumed upon iteration, which would
require a rewrite to make sure that each input was only traversed
once. Collection implies the "can re-iterate" property.)

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Add casts in a few select cases

Casts are instructions to the type checker only, they aren't "safe" and
should probably be avoided in general. In this case, when we perform
type checking on a nested structure, the type of each field does not
"stick".

(See PEP 647 for an example of "type narrowing" that does "stick".
 It is available in Python 3.10, so we can't use it yet.)

We don't need to assert that something is a str if we've already checked
or asserted that it is -- use a cast instead for these cases.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Check type of union and alternate 'data' member

Prior to this commit, specifying a non-object value here causes the QAPI
parser to crash in expr.py with a stack trace with (likely) an
AttributeError when we attempt to call that value's items() method.

This member needs to be an object (Dict), and not anything else. Add a
check for this with a nicer error message, and formalize that check with
new test cases that exercise that error.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: move string check upwards in check_type

For readability purposes only, shimmy the early return upwards to the
top of the function, so cases proceed in order from least to most
complex.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Add assertion for union type 'check_dict'

mypy isn't fond of allowing you to check for bool membership in a
collection of str elements. Guard this lookup for precisely when we were
given a name.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: constrain incoming expression types

mypy does not know the types of values stored in Dicts that masquerade
as objects. Help the type checker out by constraining the type.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Check for dict instead of OrderedDict

OrderedDict is a subtype of dict, so we can check for a more general
form. These functions do not themselves depend on it being any
particular type.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr.py: Remove 'info' argument from nested check_if_str

The function can just use the argument from the scope above. Otherwise,
we get shadowed argument errors because the parameter name clashes with
the name of a variable already in-scope.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi/expr: Comment cleanup

The linter yaps after 0825f62c842. Fix this trivial issue to restore the
linter baseline.

(Yes, ideally -- and soon -- the linter will be part of CI so we don't
clutter up the log with fixups. For now, though, the baseline is useful
for testing intermediate commits as types are added to the QAPI
library.)

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210430' into staging

target-arm queue:
 * hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows
 * hw: add compat machines for 6.1
 * Fault misaligned accesses where the architecture requires it
 * Fix some corner cases of MTE faults (notably with misaligned accesses)
 * Make Thumb store insns UNDEF for Rn==1111
 * hw/arm/smmuv3: Support 16K translation granule

# gpg: Signature made Fri 30 Apr 2021 11:33:45 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210430: (43 commits)
  hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows
  hw: add compat machines for 6.1
  target/arm: Enforce alignment for sve LD1R
  target/arm: Enforce alignment for aa64 vector LDn/STn (single)
  target/arm: Enforce alignment for aa64 vector LDn/STn (multiple)
  target/arm: Use MemOp for size + endian in aa64 vector ld/st
  target/arm: Enforce alignment for aa64 load-acq/store-rel
  target/arm: Use finalize_memop for aa64 fpr load/store
  target/arm: Use finalize_memop for aa64 gpr load/store
  target/arm: Enforce alignment for VLDn/VSTn (single)
  target/arm: Enforce alignment for VLDn/VSTn (multiple)
  target/arm: Enforce alignment for VLDn (all lanes)
  target/arm: Enforce alignment for VLDR/VSTR
  target/arm: Enforce alignment for VLDM/VSTM
  target/arm: Enforce alignment for SRS
  target/arm: Enforce alignment for RFE
  target/arm: Enforce alignment for LDM/STM
  target/arm: Enforce alignment for LDA/LDAH/STL/STLH
  target/arm: Enforce word alignment for LDRD/STRD
  target/arm: Adjust gen_aa32_{ld, st}_i64 for align+endianness
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

vhost-user-blk: Fail gracefully on too large queue size

virtio_add_queue() aborts when queue_size > VIRTQUEUE_MAX_SIZE, so
vhost_user_blk_device_realize() should check this before calling it.

Simple reproducer:

qemu-system-x86_64 \
    -chardev null,id=foo \
    -device vhost-user-blk-pci,queue-size=4096,chardev=foo

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935014
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210413165654.50810-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-img convert: Unshare write permission for source

For a successful conversion of an image, we must make sure that its
content doesn't change during the conversion.

A special case of this is using the same image file both as the source
and as the destination. If both input and output format are raw, the
operation would just be useless work, with other formats it is a sure
way to destroy the image. This will now fail because the image file
can't be opened a second time for the output when opening it for the
input has already acquired file locks to unshare BLK_PERM_WRITE.

Nevertheless, if there is some reason in a special case why it is
actually okay to allow writes to the image while it is being converted,
-U can still be used to force sharing all permissions.

Note that for most image formats, BLK_PERM_WRITE would already be
unshared by the format driver, so this only really makes a difference
for raw source images (but any output format).

Reported-by: Xueqiang Wei <xuwei@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210422164344.283389-3-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Add BDRV_O_NO_SHARE for blk_new_open()

Normally, blk_new_open() just shares all permissions. This was fine
originally when permissions only protected against uses in the same
process because no other part of the code would actually get to access
the block nodes opened with blk_new_open(). However, since we use it for
file locking now, unsharing permissions becomes desirable.

Add a new BDRV_O_NO_SHARE flag that is used in blk_new_open() to unshare
any permissions that can be unshared.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210422164344.283389-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: refactor bdrv_node_check_perm()

Now, bdrv_node_check_perm() is called only with fresh cumulative
permissions, so its actually "refresh_perm".

Move permission calculation to the function. Also, drop unreachable
error message and rewrite the remaining one to be more generic (as now
we don't know which node is added and which was already here).

Add also Virtuozzo copyright, as big work is done at this point.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-37-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: rename bdrv_replace_child_safe() to bdrv_replace_child()

We don't have bdrv_replace_child(), so it's time for
bdrv_replace_child_safe() to take its place.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-36-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: refactor bdrv_child_set_perm_safe() transaction action

Old interfaces dropped, nobody directly calls
bdrv_child_set_perm_abort() and bdrv_child_set_perm_commit(), so we can
use personal state structure for the action and stop exploiting
BdrvChild structure. Also, drop "_safe" suffix which is redundant now.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-35-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: inline bdrv_replace_child()

bdrv_replace_child() has only one caller, the second argument is
unused. Inline it now. This triggers deletion of some more unused
interfaces.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-34-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: inline bdrv_check_perm_common()

bdrv_check_perm_common() has only one caller, so no more sense in
"common".

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-33-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: drop unused permission update functions

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-32-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>