tests/docker/run: don't source /etc/profile

The usual behaviour of /etc/profile is to set the default PATH for
users. This runs into problems when we have updated PATH in our
dockerfile e.g. to access a cross-compiler in a non-standard
location. It shouldn't be needed anyway as we inherit the env from the
image when it was setup.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170926133622.14991-1-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>

docker: Fix test-mingw

Feature "dtc" is explicitly required by test-mingw, but is not detected
by the run script since we switched to archive-source.sh in b7f404201e4.
Since it isn't available in the Fedora image which runs this test on
patchew, the way we get dtc is still from submodule.

archive-source.sh takes care of bundling the submodule files already, so
what we need to do is just checking if files are there. Makefile is
chosen because it is one that is unlikely to get renamed in the future.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170925082913.22089-1-famz@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

docker: add installation to build tests

Basic test that "make install" works; this requires msgfmt so add
gettext to the packages.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1506095371-23160-1-git-send-email-pbonzini@redhat.com>
[Rebase to master. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170927a' into staging

Migration pull 2017-09-27

# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170927a:
  migration: Route more error paths
  migration: Route errors up through vmstate_save
  migration: wire vmstate_save_state errors up to vmstate_subsection_save
  migration: Check field save returns
  migration: check pre_save return in vmstate_save_state
  migration: pre_save return int
  migration: disable auto-converge during bulk block migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.11-20170927' into staging

ppc patch queue 2017-09-27

Contains
 * a number of Mac machine type fixes
 * a number of embedded machine type fixes (preliminary to adding the
   Sam460ex board)
 * a important fix for handling of migration with KVM PR
 * assorted other minor fixes and cleanups

# gpg: Signature made Wed 27 Sep 2017 08:40:48 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.11-20170927: (26 commits)
  macio: use object link between MACIO_IDE and MAC_DBDMA object
  macio: pass channel into MACIOIDEState via qdev property
  mac_dbdma: remove DBDMA_init() function
  mac_dbdma: QOMify
  mac_dbdma: remove unused IO fields from DBDMAState
  spapr: fix the value of SDR1 in kvmppc_put_books_sregs()
  ppc/pnv: check for OPAL firmware file presence
  ppc: remove all unused CPU definitions
  ppc: remove unused CPU definitions
  spapr_pci: make index property mandatory
  macio: convert pmac_ide_ops from old_mmio
  ppc/pnv: Improve macro parenthesization
  spapr: introduce helpers to migrate HPT chunks and the end marker
  ppc/kvm: generalize the use of kvmppc_get_htab_fd()
  ppc/kvm: change kvmppc_get_htab_fd() to return -errno on error
  ppc: Fix OpenPIC model
  ppc/ide/macio: Add missing registers
  ppc/mac: More rework of the DBDMA emulation
  ppc/mac: Advertise a high clock frequency for NewWorld Macs
  ppc: QOMify g3beige machine
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Tue 26 Sep 2017 14:52:32 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (24 commits)
  block/qcow2-bitmap: fix use of uninitialized pointer
  qemu-iotests: add shrinking image test
  qcow2: add shrink image support
  qcow2: add qcow2_cache_discard
  qemu-img: add --shrink flag for resize
  iotests: fix 181: enable postcopy-ram capability on target
  qemu-iotests: Test change-backing-file command
  block: Fix permissions after bdrv_reopen()
  block: reopen: Queue children after their parents
  block: Base permissions on rw state after reopen
  block: Add reopen queue to bdrv_check_perm()
  block: Add reopen_queue to bdrv_child_perm()
  qemu-io: Drop write permissions before read-only reopen
  block: Clean up some bad code in the vvfat driver
  block/throttle-groups.c: allocate RestartData on the heap
  throttle: Assert that bkt->max is valid in throttle_compute_wait()
  iotests: Print full path of bad output if mismatch
  iotests: use virtio aliases for 067
  iotests: use -ccw on s390x for 051
  iotests: use -ccw on s390x for 040, 139, and 182
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170927' into staging

Another s390x compat fix that should make it into 2.10.1.

# gpg: Signature made Wed 27 Sep 2017 10:30:16 BST
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20170927:
  s390x/cpumodel: remove ais from z14 default model-> also for 2.10.1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: Route more error paths

vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up;  there are lots
of more complex cases where their own error paths need fixing.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Commit message fix up as Peter's review

migration: Route errors up through vmstate_save

Route the errors from vsmtate_save_state back up through
vmstate_save and out to the normal device state path.
That's the normal error path done.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-6-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: wire vmstate_save_state errors up to vmstate_subsection_save

Route the errors from vmstate_save_state up through
vmstate_subsection_save (and back down, all rather recursive).

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-5-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Commit message fixed up as per Peter's review

migration: Check field save returns

Check the return values from vmstate_save_state for fields and also the
return values from 'put' for fields that use that.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-4-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: check pre_save return in vmstate_save_state

Check the return value of pre_save state and fail vmstate_save_state
if the pre_save failed.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: pre_save return int

Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: disable auto-converge during bulk block migration

auto-converge and block migration currently do not play well together.
During block migration the auto-converge logic detects that ram
migration makes no progress and thus throttles down the vm until
it nearly stalls completely. Avoid this by disabling the throttling
logic during the bulk phase of the block migration.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1506421996-12513-1-git-send-email-pl@kamp.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

s390x/cpumodel: remove ais from z14 default model-> also for 2.10.1

We disabled ais for 2.10, so let's also remove it from the z14
default model.

Fixes: 3f2d07b3b01e ("s390x/ais: for 2.10 stable: disable ais facility")
CC: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20170927072030.35737-2-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

macio: use object link between MACIO_IDE and MAC_DBDMA object

Using a standard QOM object link we can pass a reference to the MAC_DBDMA
controller to the MACIO_IDE object which removes the last external parameter
to macio_ide_register_dma().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

macio: pass channel into MACIOIDEState via qdev property

One of the reasons macio_ide_register_dma() needs to exist is because the
channel id isn't passed into the MACIO_IDE object. Pass in the channel id
using a qdev property to remove this requirement.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

mac_dbdma: remove DBDMA_init() function

Instead we can now instantiate the MAC_DBDMA object directly within the
macio device. We also add the DBDMA device as a child property so that
it is possible to retrieve later.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

mac_dbdma: QOMify

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

mac_dbdma: remove unused IO fields from DBDMAState

These fields were used to manually handle IO requests that weren't aligned
to a sector boundary before this feature was supported by the block API.

Once the block API changed to support byte-aligned IO requests, the macio
controller was switched over to use it in commit be1e343 but these fields
were accidentally left behind. Remove them, including the initialisation
in DBDMA_init().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr: fix the value of SDR1 in kvmppc_put_books_sregs()

When running with KVM PR, if a new HPT is allocated we need to inform
KVM about the HPT address and size. This is currently done by hacking
the value of SDR1 and pushing it to KVM in several places.

Also, migration breaks the guest since it is very unlikely the HPT has
the same address in source and destination, but we push the incoming
value of SDR1 to KVM anyway.

This patch introduces a new virtual hypervisor hook so that the spapr
code can provide the correct value of SDR1 to be pushed to KVM each
time kvmppc_put_books_sregs() is called.

It allows to get rid of all the hacking in the spapr/kvmppc code and
it fixes migration of nested KVM PR.

Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/pnv: check for OPAL firmware file presence

and exit before uselessly trying to load it if the file does not
exists.

Issue discovered by Coverity Scan.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: remove all unused CPU definitions

Remove *all* unused CPU definitions as indicated by compile-time
`#if 0` constructs.

Signed-off-by: John Snow <jsnow@redhat.com>
[dwg: Removed some additional now-useless comments]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: remove unused CPU definitions

Following commit aef77960, remove now-unused definitions from
cpu-models.h.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr_pci: make index property mandatory

PHBs can be created with an index property, in which case the machine
code automatically sets all the MMIO windows at addresses derived from
the index. Alternatively, they can be manually created without index,
but the user has to provide addresses for all MMIO windows.

The non-index way happens to be more trouble than it's worth: it's
difficult to use, keeps requiring (potentially incompatible) changes
when some new parameter needs adding, and is awkward to check for
collisions. It currently even has a bug that prevents to use two
non-index PHBs because their child DRCs are all derived from the
same index == -1 value, and, thus, collide.

This patch hence makes the index property mandatory. As a consequence,
the PHB's memory regions and BUID are now always configured according
to the index, and it is no longer possible to set them from the command
line.

This DOES BREAK backwards compat, but we don't think the non-index
PHB feature was used in practice (at least libvirt doesn't) and the
simplification is worth it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

macio: convert pmac_ide_ops from old_mmio

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/pnv: Improve macro parenthesization

Although none of the existing macro call-sites were broken,
it's always better to write macros that properly parenthesize
arguments that can be complex expressions, so that the intended
order of operations is not broken.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr: introduce helpers to migrate HPT chunks and the end marker

This consolidates some duplicated code in a dedicated helpers.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/kvm: generalize the use of kvmppc_get_htab_fd()

The use of KVM_PPC_GET_HTAB_FD is open-coded in kvmppc_read_hptes()
and kvmppc_write_hpte().

This patch modifies kvmppc_get_htab_fd() so that it can be used
everywhere we need to access the in-kernel htab:
- add an index argument
  => only kvmppc_read_hptes() passes an actual index, all other users
     pass 0
- add an errp argument to propagate error messages to the caller.
  => spapr migration code prints the error
  => hpte helpers pass &error_abort to keep the current behavior
     of hw_error()

While here, this also fixes a bug in kvmppc_write_hpte() so that it
opens the htab fd for writing instead of reading as it currently does.
This never broke anything because we currently never call this code,
as explained in the changelog of commit c1385933804bb:

"This support updating htab managed by the hypervisor. Currently
 we don't have any user for this feature. This actually bring the
 store_hpte interface in-line with the load_hpte one. We may want
 to use this when we want to emulate henter hcall in qemu for HV
 kvm."

The above is still true today.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/kvm: change kvmppc_get_htab_fd() to return -errno on error

When kvmppc_get_htab_fd() fails, its return value is propagated up to
qemu_savevm_state_iterate() or to qemu_savevm_state_complete_precopy().
All savevm handlers expect to receive a negative errno on error.

Let's patch kvmppc_get_htab_fd() accordingly.

While here, let's change htab_load() in the spapr code to also
propagate the error, since it doesn't make sense to abort() if
we couldn't get the htab fd from KVM.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Fix OpenPIC model

Apple uses an IBM MPIC2A without timers, it has 64 sources.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/ide/macio: Add missing registers

The timing register exists on all variants of MacIO IDE, we just
store and return its value.

The interrupts register only exists on KeyLargo but it doesn't
hurt to have it. The lack of this register causes MacOS X to
hangs under some circumstances.

Both are 32-bit only. The HW might support smaller access sizes
but no known OS uses them.

Because the core IDE subsystem doesn't provide us with a way
to query the main (level) interrupt state, nor do we have a way
to know that DBDMA issued a (edge) interrupt, we reflect both
through a private pair of qirq's in order to maintain the
register state.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/mac: More rework of the DBDMA emulation

This completely reworks the handling of the control register
according to my understanding of the HW and the spec.

It should (hopefully ... still testing) fix a number of issues
most notably cases of MacOS hanging.

Also update dbdma_unassigned_rw() and dbdma_unassigned_flush() to
have the expected behaviour now that flush is handled slightly
differently.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/mac: Advertise a high clock frequency for NewWorld Macs

We use 900Mhz, otherwise MacOS X 10.5 refuses to install.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: QOMify g3beige machine

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc4xx: Add more PLB registers

These registers are present in 440 SoCs (and maybe in others too) and
U-Boot accesses them when printing register info. We don't emulate
these but add them to avoid crashing when they are read or written.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Add 460EX embedded CPU

Despite its name it is a 440 core CPU

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ehci: Add ppc4xx-ehci for the USB 2.0 controller in embedded PPC SoCs

Some PPC SoCs have an EHCI with OHCI companion USB controller. Add a
new type for this similar to types used for other embedded SoCs.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ohci: Allow sysbus version to be used as a companion

Some PPC SoCs have an EHCI with OHCI companion USB controller. To
emulate this allow the sysbus version of OHCI to be used as a companion.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/kvm: drop kvmppc_has_cap_htab_fd()

It never got used since its introduction (commit 7c43bca004af).

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/kvm: check some capabilities with kvm_vm_check_extension()

The following capabilities are VM specific:
- KVM_CAP_PPC_SMT_POSSIBLE
- KVM_CAP_PPC_HTAB_FD
- KVM_CAP_PPC_ALLOC_HTAB

If both KVM HV and KVM PR are present, checking them always return
the HV value, even if we explicitely requested to use PR.

This has no visible effect for KVM_CAP_PPC_ALLOC_HTAB, because we also
try the KVM_PPC_ALLOCATE_HTAB ioctl which is only suppored by HV. As
a consequence, the spapr code doesn't even check KVM_CAP_PPC_HTAB_FD.

However, this will cause kvmppc_hint_smt_possible(), introduced by
commit fa98fbfcdfcb9, to report several VSMT modes (eg, Available
VSMT modes: 8 4 2 1) whereas PR only support mode 1.

This patch fixes all three anyway to use kvm_vm_check_extension(). It
is okay since the VM is already created at the time kvm_arch_init() or
kvmppc_reset_htab() is called.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Merge remote-tracking branch 'remotes/kraxel/tags/fw-20170926-pull-request' into staging

add --firmwarepath to configure

# gpg: Signature made Tue 26 Sep 2017 12:06:07 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/fw-20170926-pull-request:
  Add --firmwarepath to configure
  add qemu_add_data_dir()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2017-09-26

# gpg: Signature made Tue 26 Sep 2017 07:13:16 BST
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch: (29 commits)
  hw/isa/pc87312: Mark the device with user_creatable = false
  Drop gld linker usage on SunOS
  tests/boot-sector: Increase timeout to 600 seconds
  nbd-client: Use correct macro parenthesization
  hw/display/virtio-gpu: Put the virtio-gpu-device into the display category
  osdep: Fix ROUND_UP(64-bit, 32-bit)
  target/xtensa: Use the pre-defined MEMTXATTRS_UNSPECIFIED macro
  trivial: Add missing "-m" parameter in docs/memory-hotplug.txt
  chardev/baum: fix baum that releases brlapi twice
  remove trailing whitespace from qemu-options.hx
  hw/display/xenfb.c: Add trace_xenfb_key_event
  aux-to-i2c-bridge: don't allow user to create one
  util/qemu-thread-posix.c: Replace OS ifdefs with CONFIG_HAVE_SEM_TIMEDWAIT
  MAINTAINERS: update docs/interop/ entries
  MAINTAINERS: update docs/devel/ entries
  MAINTAINERS: add missing Cryptography entry
  MAINTAINERS: add missing entry for Generic Loader
  MAINTAINERS: add missing AIO entry
  MAINTAINERS: add missing entries for throttling infra
  MAINTAINERS: add missing SSI entries
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20170925' into staging

BQL bug fix

# gpg: Signature made Mon 25 Sep 2017 23:14:48 BST
# gpg:                using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20170925:
  accel/tcg/cputlb: avoid recursive BQL (fixes #1706296)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'mreitz/tags/pull-block-2017-09-26' into queue-block

Block patches

# gpg: Signature made Tue Sep 26 15:01:00 2017 CEST
# gpg:                using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* mreitz/tags/pull-block-2017-09-26:
  block/qcow2-bitmap: fix use of uninitialized pointer
  qemu-iotests: add shrinking image test
  qcow2: add shrink image support
  qcow2: add qcow2_cache_discard
  qemu-img: add --shrink flag for resize

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/qcow2-bitmap: fix use of uninitialized pointer

Without initialization to zero dirty_bitmap field may be not zero
for a bitmap which should not be stored and
qcow2_store_persistent_dirty_bitmaps will erroneously call
store_bitmap for it which leads to SIGSEGV on bdrv_dirty_bitmap_name.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170922144353.4220-1-vsementsov@virtuozzo.com
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-iotests: add shrinking image test

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-5-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qcow2: add shrink image support

This patch add shrinking of the image file for qcow2. As a result, this allows
us to reduce the virtual image size and free up space on the disk without
copying the image. Image can be fragmented and shrink is done by punching holes
in the image file.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-4-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qcow2: add qcow2_cache_discard

Whenever l2/refcount table clusters are discarded from the file we can
automatically drop unnecessary content of the cache tables. This reduces
the chance of eviction useful cache data and eliminates inconsistent data
in the cache with the data in the file.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-3-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-img: add --shrink flag for resize

The flag is additional precaution against data loss. Perhaps in the future the
operation shrink without this flag will be blocked for all formats, but for now
we need to maintain compatibility with raw.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-2-pbutsykin@virtuozzo.com
[mreitz: Added a missing space to a warning]
Signed-off-by: Max Reitz <mreitz@redhat.com>

iotests: fix 181: enable postcopy-ram capability on target

Migration capabilities should be enabled on both source and
destination qemu processes.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-iotests: Test change-backing-file command

This involves a temporary read-write reopen if the backing file link in
the middle of a backing file chain should be changed and is therefore a
good test for the latest bdrv_reopen() vs. op blockers fixes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Fix permissions after bdrv_reopen()

If we switch between read-only and read-write, the permissions that
image format drivers need on bs->file change, too. Make sure to update
the permissions during bdrv_reopen().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

block: reopen: Queue children after their parents

We will calculate the required new permissions in the prepare stage of a
reopen. Required permissions of children can be influenced by the
changes made to their parents, but parents are independent from their
children. This means that permissions need to be calculated top-down. In
order to achieve this, queue parents before their children rather than
queuing the children first.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

block: Base permissions on rw state after reopen

When new permissions are calculated during bdrv_reopen(), they need to
be based on the state of the graph as it will be after the reopen has
completed, not on the current state of the involved nodes.

This patch makes bdrv_is_writable() optionally accept a BlockReopenQueue
from which the new flags are taken. This is then used for determining
the new bs->file permissions of format drivers as soon as we add the
code to actually pass a non-NULL reopen queue to the .bdrv_child_perm
callbacks.

While moving bdrv_is_writable(), make it static. It isn't used outside
block.c.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

block: Add reopen queue to bdrv_check_perm()

In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

block: Add reopen_queue to bdrv_child_perm()

In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qemu-io: Drop write permissions before read-only reopen

qemu-io provides a 'reopen' command that allows switching from writable
to read-only access. We need to make sure that we don't try to keep
write permissions to a BlockBackend that becomes read-only, otherwise
things are going to fail.

This requires a bdrv_drain() call because otherwise in-flight AIO
write requests could issue new internal requests while the permission
has already gone away, which would cause assertion failures. Draining
the queue doesn't break AIO requests in any new way, bdrv_reopen() would
drain it anyway only a few lines later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>

block: Clean up some bad code in the vvfat driver

Remove the unnecessary home-grown redefinition of the assert() macro here,
and remove the unusable debug code at the end of the checkpoint() function.
The code there uses assert() with side-effects (assignment to the "mapping"
variable), which should be avoided. Looking more closely, it seems as it is
apparently also only usable for one certain directory layout (with a file
named USB.H in it) and thus is of no use for the rest of the world.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/throttle-groups.c: allocate RestartData on the heap

RestartData is the opaque data of the throttle_group_restart_queue_entry
coroutine. By being stack allocated, it isn't available anymore if
aio_co_enter schedules the coroutine with a bottom half and runs after
throttle_group_restart_queue returns.

Cc: qemu-stable@nongnu.org
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

throttle: Assert that bkt->max is valid in throttle_compute_wait()

If bkt->max == 0 and bkt->burst_length > 1 then we could have a
division by 0 in throttle_do_compute_wait(). That configuration is
however not permitted and is already detected by throttle_is_valid(),
but let's assert it in throttle_compute_wait() to make it explicit.

Found by Coverity (CID: 1381016).

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iotests: Print full path of bad output if mismatch

So it is easier to copy paste the path.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iotests: use virtio aliases for 067

The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x.

Using virtio-scsi will implicitly pick the right device, so just
switch to that for simplicity.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iotests: use -ccw on s390x for 051

The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x, so use the -ccw instead of the -pci versions of virtio
devices on s390x.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iotests: use -ccw on s390x for 040, 139, and 182

The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x, so use the -ccw instead of the -pci versions of virtio
devices on s390x.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

docs: add qemu-block-drivers(7) man page

Block driver documentation is available in qemu-doc.html.  It would be
convenient to have documentation for formats, protocols, and filter
drivers in a man page.

Extract the relevant part of qemu-doc.html into a new file called
docs/qemu-block-drivers.texi.  This file can also be built as a
stand-alone document (man, html, etc).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

file-posix: Clear out first sector in hdev_create

People get surprised when, after "qemu-img create -f raw /dev/sdX", they
still see qcow2 with "qemu-img info", if previously the bdev had a qcow2
header. While this is natural because raw doesn't need to write any
magic bytes during creation, hdev_create is free to clear out the first
sector to make sure the stale qcow2 header doesn't cause such confusion.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-img: Clarify about relative backing file options

It's not too surprising when a user specifies the backing file relative
to the current working directory instead of the top layer image. This
causes error when they differ. Though the error message has enough
information to infer the fact about the misunderstanding, it is better
if we document this explicitly, so that users don't have to learn from
mistakes.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-iotests: Add missing -machine accel=qtest

A basic set of qemu options is initialised in ./common:

    export QEMU_OPTIONS="-nodefaults -machine accel=qtest"

However, two test cases (172 and 186) overwrite QEMU_OPTIONS and neglect
to manually set '-machine accel=qtest'. Add the missing option for 172.
186 probably only copied the code from 172, it doesn't actually need to
overwrite QEMU_OPTIONS, so remove that in 186.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Add --firmwarepath to configure

Add a firmware path config option to configure.  Multiple directories
are accepted, with the usual colon as separator.  Default value is
${prefix}/share/qemu-firmware.  The path is searched in addition to the
current search path (typically ${prefix}/share/qemu).

This prepares qemu for the planned split of the prebuilt firmware blobs
into a separate project.

Distributions can also use this to get rid of the firmware symlink farm
and add -- for example -- /usr/share/seabios to the firmware path
instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170914114236.25343-3-kraxel@redhat.com

add qemu_add_data_dir()

Add helper function to add a directory to the qemu search path, so we
don't duplicate the checks.  Add a check for duplicate entries, so we
stop trying to open files twice.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170914114236.25343-2-kraxel@redhat.com

hw/isa/pc87312: Mark the device with user_creatable = false

QEMU currently aborts if you try to use the device at the command
line:

$ ppc64-softmmu/qemu-system-ppc64 -S -machine prep -device pc87312
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:222:
qemu-system-ppc64: -device pc87312: Device 'parallel0' is in use
Aborted (core dumped)

It uses parallel_hds in its realize function, so I can not be
instantiated by the user again.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

Drop gld linker usage on SunOS

This is required to be removed on SmartOS (Illumos).
As of now there are no alternative supported SunOS distributions.

Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

tests/boot-sector: Increase timeout to 600 seconds

If QEMU has been compiled with the flags --enable-tcg-interpreter and
--enable-debug, the guest is running incredibly slow. The pxe boot test
can take up to 400 seconds when testing the pseries ppc64 machine. While
we should still look for ways to speed up the test on the pseries machine,
it's better to increase the timeout in this test to 600 seconds anyway to
allow the test to pass successfully now with this unusal configuration
already.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

nbd-client: Use correct macro parenthesization

If 'bs' is a complex expression, we were only casting the front half
rather than the full expression.  Luckily, none of the callers were
passing bad arguments, but it's better to be robust up front.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/display/virtio-gpu: Put the virtio-gpu-device into the display category

The virtio-gpu-pci device is already in the display category, so the
virtio-gpu-device should be there, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

osdep: Fix ROUND_UP(64-bit, 32-bit)

When using bit-wise operations that exploit the power-of-two
nature of the second argument of ROUND_UP(), we still need to
ensure that the mask is as wide as the first argument (done
by using a ternary to force proper arithmetic promotion).
Unpatched, ROUND_UP(2ULL*1024*1024*1024*1024, 512U) produces 0,
instead of the intended 2TiB, because negation of an unsigned
32-bit quantity followed by widening to 64-bits does not
sign-extend the mask.

Broken since its introduction in commit 292c8e50 (v1.5.0).
Callers that passed the same width type to both macro parameters,
or that had other code to ensure the first parameter's maximum
runtime value did not exceed the second parameter's width, are
unaffected, but I did not audit to see which (if any) existing
clients of the macro could trigger incorrect behavior (I found
the bug while adding a new use of the macro).

While preparing the patch, checkpatch complained about poor
spacing, so I also fixed that here and in the nearby DIV_ROUND_UP.

CC: qemu-trivial@nongnu.org
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

target/xtensa: Use the pre-defined MEMTXATTRS_UNSPECIFIED macro

Instead of using the hardcoded (MemTxAttrs){0} for no memory attributes
let's use the already defined MEMTXATTRS_UNSPECIFIED macro instead.

This is technically a change of behaviour as MEMTXATTRS_UNSPECIFIED sets
the unspecified field to 1, but it doesn't look like anything is
checking this field.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

trivial: Add missing "-m" parameter in docs/memory-hotplug.txt

The example obviously lacks the "-m" parameter.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

chardev/baum: fix baum that releases brlapi twice

Error process of baum_chr_open needs to set brlapi null, so it won't
get released twice in char_braille_finalize, which will cause
"/usr/bin/qemu-system-x86_64: double free or corruption (!prev)"

Signed-off-by: Liang Yan <lyan@suse.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

remove trailing whitespace from qemu-options.hx

Remove trailing whitespace in qemu-options documentation, as it causes
reproducibility issues depending on the echo implementation used by
the Makefile.

Reported-By: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

hw/display/xenfb.c: Add trace_xenfb_key_event

It may be better to add a trace event to monitor the last moment of
a key event from QEMU to guest VM

Signed-off-by: Liang Yan <lyan@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

aux-to-i2c-bridge: don't allow user to create one

This device is private and is created once per aux-bus.
So don't allow the user to create one from command-line.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

util/qemu-thread-posix.c: Replace OS ifdefs with CONFIG_HAVE_SEM_TIMEDWAIT

In qemu-thread-posix.c we have two implementations of the
various qemu_sem_* functions, one of which uses native POSIX
sem_* and the other of which emulates them with pthread conditions.
This is necessary because not all our host OSes support
sem_timedwait().

Instead of a hard-coded list of OSes which don't implement
sem_timedwait(), which gets out of date, make configure
test for the presence of the function and set a new
CONFIG_HAVE_SEM_TIMEDWAIT appropriately.

In particular, newer NetBSDs have sem_timedwait(), so this
commit will switch them over to using it. OSX still does
not have an implementation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: update docs/interop/ entries

moved in commit 7746cf8aab68

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Fam Zheng <famz@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: update docs/devel/ entries

moved in commit ac06724a7158

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing Cryptography entry

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing entry for Generic Loader

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing AIO entry

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing entries for throttling infra

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing SSI entries

Alistair Francis volunteered :)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing PCI entries

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing qcow2 entry

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing Guest Agent entries

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing VMWare entry

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing entry for vhost

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing STM32 entry

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: add missing ARM entries

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

Replace round_page() with TARGET_PAGE_ALIGN()

This change fixes conflict with the DragonFly BSD headers.

Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

configure: Remove unused code (found by shellcheck)

smartcard_cflags is no longer needed since commit
0b22ef0f57a8910d849602bef0940edcd0553d2c.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>