virtio: add vhost-user-fs-ccw device

Wire up the CCW device for vhost-user-fs.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Message-id: 20200901150019.29229-2-mhartmay@linux.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

libvhost-user: handle endianness as mandated by the spec

Since virtio existed even before it got standardized, the virtio
standard defines the following types of virtio devices:

 + legacy device (pre-virtio 1.0)
 + non-legacy or VIRTIO 1.0 device
 + transitional device (which can act both as legacy and non-legacy)

Virtio 1.0 defines the fields of the virtqueues as little endian,
while legacy uses guest's native endian [1]. Currently libvhost-user
does not handle virtio endianness at all, i.e. it works only if the
native endianness matches with whatever is actually needed. That means
things break spectacularly on big-endian targets. Let us handle virtio
endianness for non-legacy as required by the virtio specification [1]
and fence legacy virtio, as there is no safe way to figure out the
needed endianness conversions for all cases. The fencing of legacy
virtio devices is done in `vu_set_features_exec`.

[1] https://docs.oasis-open.org/virtio/virtio/v1.1/cs01/virtio-v1.1-cs01.html#x1-210003

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-id: 20200901150019.29229-3-mhartmay@linux.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

MAINTAINERS: add Stefan Hajnoczi as block/nvme.c maintainer

Development of the userspace NVMe block driver picked up again recently.
After talking with Fam I am stepping up as block/nvme.c maintainer.
Patches will be merged through my 'block' tree.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Klaus Jensen <k.jensen@samsung.com>
Cc: Fam Zheng <fam@euphon.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Fam Zheng <fam@euphon.net>
Message-id: 20200907111632.90499-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/input-20200921-pull-request' into staging

input: tsc2xxx fix.

# gpg: Signature made Mon 21 Sep 2020 12:09:17 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/input-20200921-pull-request:
  hw/input/tsc2xxx: Reduce MouseTransformInfo structure exposure

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200921-pull-request' into staging

usb: fix u2f build
usb: fix ohci oob access and loop issues

# gpg: Signature made Mon 21 Sep 2020 09:58:06 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20200921-pull-request:
  hw: usb: hcd-ohci: check for processed TD before retire
  hw: usb: hcd-ohci: check len and frame_number variables
  usb: fix u2f build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial patches 20200919

# gpg: Signature made Sat 19 Sep 2020 19:43:35 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  contrib/: fix some comment spelling errors
  qapi/: fix some comment spelling errors
  disas/: fix some comment spelling errors
  linux-user/: fix some comment spelling errors
  util/: fix some comment spelling errors
  scripts/: fix some comment spelling errors
  docs/: fix some comment spelling errors
  migration/: fix some comment spelling errors
  qemu/: fix some comment spelling errors
  scripts/git.orderfile: Display meson files along with buildsys ones
  hw/timer/hpet: Fix debug format strings
  hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw
  meson: remove empty else and duplicated gio deps
  manual: escape backslashes in "parsed-literal" blocks
  ui/spice-input: Remove superfluous forward declaration
  hw/ppc/ppc4xx_pci: Replace magic value by the PCI_NUM_PINS definition
  hw/gpio/max7310: Remove impossible check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

QOM queue, 2020-09-18

Fixes:
* Error value corrections (Markus Armbruster)
* Correct object_class_dynamic_cast_assert() documentation (Eduardo Habkost)
* Ensure objects using QEMU_ALIGNED are properly aligned (Richard Henderson)

QOM cleanups (Eduardo Habkost):
* Rename some constants
* Simplify parameters of OBJECT_DECLARE* macros
* Additional DECLARE_*CHECKER* usage
* Additional OBJECT_DECLARE_TYPE usage
* Additional OBJECT_DECLARE_SIMPLE_TYPE usage

# gpg: Signature made Fri 18 Sep 2020 21:45:29 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  Use OBJECT_DECLARE_SIMPLE_TYPE when possible
  Use OBJECT_DECLARE_TYPE when possible
  qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros
  qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE
  scripts/codeconverter: Update to latest version
  target/s390x: Set instance_align on S390CPU TypeInfo
  target/riscv: Set instance_align on RISCVCPU TypeInfo
  target/ppc: Set instance_align on PowerPCCPU TypeInfo
  target/arm: Set instance_align on CPUARM TypeInfo
  qom: Allow objects to be allocated with increased alignment
  qom: Correct error values in two contracts
  qom: Clean up object_property_get_enum()'s error value
  qom: Correct object_class_dynamic_cast_assert() documentation
  sifive: Use DECLARE_*CHECKER* macros
  sifive: Move QOM typedefs and add missing includes
  sifive_u: Rename memmap enum constants
  sifive_e: Rename memmap enum constants

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2020-09-18

Cleanups:
* Correct the meaning of '0xffffffff' value for hv-spinlocks (Vitaly Kuznetsov)
* vmport: Drop superfluous parenthesis (Philippe Mathieu-Daudé)

Fixes:
* Use generic APIC ID encoding code for EPYC (Babu Moger)

# gpg: Signature made Fri 18 Sep 2020 21:26:57 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
  i386: Simplify CPUID_8000_001E for AMD
  i386: Simplify CPUID_8000_001d for AMD
  hw/i386/vmport: Drop superfluous parenthesis around function typedef
  i386/kvm: correct the meaning of '0xffffffff' value for hv-spinlocks

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/acceptance-next-20200918' into staging

Acceptance tests queue

Get GitLab CI acceptance jobs green again.

CI jobs results:
  https://gitlab.com/philmd/qemu/-/pipelines/191795388

# gpg: Signature made Fri 18 Sep 2020 20:17:54 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/acceptance-next-20200918:
  tests/acceptance: Skip slow quanta-gsj U-boot+Linux test
  tests/acceptance: Disable tests dependent of unreliable apt.armbian.com

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging

Python queue, 2020-09-18

Alexey Kirillov (1):
      analyze-migration.py: fix read_migration_debug_json() return type

Andrey Shinkevich (1):
      scripts/simplebench: compare write request performance

# gpg: Signature made Fri 18 Sep 2020 19:02:00 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/python-next-pull-request:
  analyze-migration.py: fix read_migration_debug_json() return type
  scripts/simplebench: compare write request performance

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/input/tsc2xxx: Reduce MouseTransformInfo structure exposure

Commit a5d7eb6534a ("Add TSC2301 touchscreen & keypad controller")
added the MouseTransformInfo declaration in "ui/console.h",
however it is only used in "hw/input/tsc2xxx.h".
Reduce the structure exposure by moving it to the single include
where it is used.

This should fix a build failure on OpenBSD:

  In file included from hw/arm/nseries.c:30:
  In file included from include/hw/arm/omap.h:24:
  In file included from include/hw/input/tsc2xxx.h:14:
  include/ui/console.h:11:11: fatal error: 'epoxy/gl.h' file not found
  # include <epoxy/gl.h>
            ^~~~~~~~~~~~
  1 error generated.
  gmake: *** [Makefile.ninja:1735:
  libqemu-aarch64-softmmu.fa.p/hw_arm_nseries.c.o] Error 1

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200907010155.815131-1-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw: usb: hcd-ohci: check for processed TD before retire

While servicing OHCI transfer descriptors(TD), ohci_service_iso_td
retires a TD if it has passed its time frame. It does not check if
the TD was already processed once and holds an error code in TD_CC.
It may happen if the TD list has a loop. Add check to avoid an
infinite loop condition.

Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20200915182259.68522-3-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw: usb: hcd-ohci: check len and frame_number variables

While servicing the OHCI transfer descriptors(TD), OHCI host
controller derives variables 'start_addr', 'end_addr', 'len'
etc. from values supplied by the host controller driver.
Host controller driver may supply values such that using
above variables leads to out-of-bounds access issues.
Add checks to avoid them.

AddressSanitizer: stack-buffer-overflow on address 0x7ffd53af76a0
  READ of size 2 at 0x7ffd53af76a0 thread T0
  #0 ohci_service_iso_td ../hw/usb/hcd-ohci.c:734
  #1 ohci_service_ed_list ../hw/usb/hcd-ohci.c:1180
  #2 ohci_process_lists ../hw/usb/hcd-ohci.c:1214
  #3 ohci_frame_boundary ../hw/usb/hcd-ohci.c:1257
  #4 timerlist_run_timers ../util/qemu-timer.c:572
  #5 qemu_clock_run_timers ../util/qemu-timer.c:586
  #6 qemu_clock_run_all_timers ../util/qemu-timer.c:672
  #7 main_loop_wait ../util/main-loop.c:527
  #8 qemu_main_loop ../softmmu/vl.c:1676
  #9 main ../softmmu/main.c:50

Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <j_kangel@163.com>
Reported-by: Yi Ren <yunye.ry@alibaba-inc.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20200915182259.68522-2-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usb: fix u2f build

Just use qemu_open_old() for a quick fix, switch
to better error handling left for another day.

Fixes: 448058aa99aa ("util: rename qemu_open() to qemu_open_old()")
Cc: César Belley <cesar.belley@lse.epita.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20200918110122.9121-1-kraxel@redhat.com

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
  --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Use OBJECT_DECLARE_TYPE when possible

This converts existing DECLARE_OBJ_CHECKERS usage to
OBJECT_DECLARE_TYPE when possible.

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros

One of the goals of having less boilerplate on QOM declarations
is to avoid human error.  Requiring an extra argument that is
never used is an opportunity for mistakes.

Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.

Coccinelle patch used to convert all users of the macros:

  @@
  declarer name OBJECT_DECLARE_TYPE;
  identifier InstanceType, ClassType, lowercase, UPPERCASE;
  @@
   OBJECT_DECLARE_TYPE(InstanceType, ClassType,
  -                    lowercase,
                       UPPERCASE);

  @@
  declarer name OBJECT_DECLARE_SIMPLE_TYPE;
  identifier InstanceType, lowercase, UPPERCASE;
  @@
   OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
  -                    lowercase,
                       UPPERCASE);

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qom: Remove ParentClassType argument from OBJECT_DECLARE_SIMPLE_TYPE

The requirement to specify the parent class type makes the macro
harder to use and easy to misuse (silent bugs can be introduced
if the wrong struct type is specified).

Simplify the macro by just not declaring any class struct,
allowing us to remove the class_size field from the TypeInfo
variables for those types.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200916182519.415636-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

scripts/codeconverter: Update to latest version

I'm not documenting every single change in the codeconverter
script because most of that code will be deleted once we finish
the QOM code conversion.  This patch updates the script to the
latest version that was used to perform changes in the QOM code.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200916182519.415636-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

analyze-migration.py: fix read_migration_debug_json() return type

Since we use result of read_migration_debug_json() as JSON formatted string,
we must provide proper type. Before Python 3.6 json.loads() method
support only str typed input.

Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Message-Id: <20200715152135.20287-1-lekiravi@yandex-team.ru>
[ehabkost: added comment explaining why decode() is needed}
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

scripts/simplebench: compare write request performance

The script 'bench_write_req.py' allows comparing performances of write
request for two qemu-img binary files.
An example with (qemu-img binary 1) and without (qemu-img binary 2) the
applied patch "qcow2: skip writing zero buffers to empty COW areas"
(git commit ID: c8bb23cbdbe32f5) has the following results:

SSD:
----------------  -------------------  -------------------
                  <qemu-img binary 1>  <qemu-img binary 2>
<cluster front>   0.10 +- 0.00         8.16 +- 0.65
<cluster middle>  0.10 +- 0.00         7.37 +- 1.10
<cross cluster>   7.40 +- 1.08         21.97 +- 4.19
<cluster 64K>     2.14 +- 0.94         8.48 +- 1.66
----------------  -------------------  -------------------
HDD:
----------------  -------------------  -------------------
                  <qemu-img binary 1>  <qemu-img binary 2>
<cluster front>   2.30 +- 0.01         6.19 +- 0.06
<cluster middle>  2.20 +- 0.09         6.20 +- 0.06
<cross cluster>   8.32 +- 0.16         8.26 +- 0.14
<cluster 64K>     8.20 +- 0.05         6.26 +- 0.10
----------------  -------------------  -------------------

Suggested-by: Denis V. Lunev <den@openvz.org>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1594741846-475697-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

target/s390x: Set instance_align on S390CPU TypeInfo

Fix alignment of CPUS390XState.vregs.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200916004638.2444147-7-richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

target/riscv: Set instance_align on RISCVCPU TypeInfo

Fix alignment of CPURISCVState.vreg.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200916004638.2444147-6-richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

target/ppc: Set instance_align on PowerPCCPU TypeInfo

Fix alignment of CPUPPCState.vsr.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200916004638.2444147-5-richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

target/arm: Set instance_align on CPUARM TypeInfo

Fix alignment of CPUARMState.vfp.zregs.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200916004638.2444147-4-richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qom: Allow objects to be allocated with increased alignment

It turns out that some hosts have a default malloc alignment less
than that required for vectors.

We assume that, with compiler annotation on CPUArchState, that we
can properly align the vector portion of the guest state.  Fix the
alignment of the allocation by using qemu_memalloc when required.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200916004638.2444147-3-richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

i386: Simplify CPUID_8000_001E for AMD

apic_id contains all the information required to build
CPUID_8000_001E. core_id and node_id is already part of
apic_id generated by x86_topo_ids_from_apicid.

Also remove the restriction on number bits on core_id and
node_id.

Remove all the hardcoded values and replace with generalized
fields.

Refer the Processor Programming Reference (PPR) documentation
available from the bugzilla Link below.

Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Message-Id: <159897585257.30750.5815593918927986935.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

i386: Simplify CPUID_8000_001d for AMD

Remove all the hardcoded values and replace with generalized
fields.

Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <159897584649.30750.3939159632943292252.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

hw/i386/vmport: Drop superfluous parenthesis around function typedef

Drop superfluous parenthesis around VMPortReadFunc typedef
(added in d67f679d99, missed to remove when moved in e595112985).

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200505142836.16903-1-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

i386/kvm: correct the meaning of '0xffffffff' value for hv-spinlocks

Hyper-V TLFS prior to version 6.0 had a mistake in it: special value
'0xffffffff' for CPUID 0x40000004.EBX was called 'never to retry', this
looked weird (like why it's not '0' which supposedly have the same effect?)
but nobody raised the question. In TLFS version 6.0 the mistake was
corrected to 'never notify' which sounds logical. Fix QEMU accordingly.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200515114847.74523-1-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qom: Correct error values in two contracts

object_property_get_bool()'s contract claims it returns NULL on error.
Pasto; it returns false.

object_property_get_int()'s contract claims it returns "negative".  It
actually returns -1.  All the other object_property_get_FOO()
contracts specify the exact error value, so do the same here.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200917125540.597786-3-armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qom: Clean up object_property_get_enum()'s error value

object_property_get_enum() is the only object_property_FOO() that is
documented to return an undefined value on error.  It does no such
thing, actually: it returns 0 on some errors, and -1 on others.

Needlessly complicated.  Always return -1 on error, and adjust the
contract.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200917125540.597786-2-armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qom: Correct object_class_dynamic_cast_assert() documentation

object_class_dynamic_cast_assert() is not used by
INTERFACE_CHECK, remove misleading mention of that function in
the documentation.

Message-Id: <20200916193101.511600-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

sifive: Use DECLARE_*CHECKER* macros

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

sifive: Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

 $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
    $(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

sifive_u: Rename memmap enum constants

Some of the enum constant names conflict with the QOM type check
macros (SIFIVE_U_OTP, SIFIVE_U_PRCI).  This needs to be addressed
to allow us to transform the QOM type check macros into functions
generated by OBJECT_DECLARE_TYPE().

Rename all the constants to SIFIVE_U_DEV_*, to avoid conflicts.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200911173447.165713-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

sifive_e: Rename memmap enum constants

Some of the enum constant names conflict with a QOM type check
macro (SIFIVE_E_PRCI).  This needs to be addressed to allow us to
transform the QOM type check macros into functions generated by
OBJECT_DECLARE_TYPE().

Rename all the constants to SIFIVE_E_DEV_*, to avoid conflicts.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200911173447.165713-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

tests/acceptance: Skip slow quanta-gsj U-boot+Linux test

The 'arm_quanta_gsj_initrd' test is timeouting on GitLab CI:
https://gitlab.com/philmd/qemu/-/jobs/745483978#L846
and also sometimes on my workstation, so proceed as with
the other slow tests: do not run it by default.
The test can still be run setting the AVOCADO_TIMEOUT_EXPECTED
environment variable.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Tested-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20200918143355.153522-1-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

tests/acceptance: Disable tests dependent of unreliable apt.armbian.com

Armbian servers are not very reliable and confused the GitLab CI
users a few times this month (path updated, archives moved, and
now the SSL: CERTIFICATE_VERIFY_FAILED "certificate has expired"
error). Time to disable these tests.
Users can still use the artifacts from the cache (or manually add
them to the cache).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200917163954.50514-1-philmd@redhat.com>

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200918' into staging

fw_cfg patches

Fixes a bug in the recently introduced fw_cfg_add_from_generator().

CI jobs results:
. https://gitlab.com/philmd/qemu/-/pipelines/191714875
. https://travis-ci.org/github/philmd/qemu/builds/728288784
. https://app.shippable.com/github/philmd/qemu/runs/869/1/console

# gpg: Signature made Fri 18 Sep 2020 16:20:56 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/fw_cfg-20200918:
  hw/nvram/fw_cfg: fix FWCfgDataGeneratorClass::get_data() consumption

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/nvram/fw_cfg: fix FWCfgDataGeneratorClass::get_data() consumption

The documentation on g_byte_array_free()
<https://developer.gnome.org/glib/stable/glib-Byte-Arrays.html#g-byte-array-free>
says:

> Returns
>
> the element data if free_segment is FALSE, otherwise NULL. The element
> data should be freed using g_free().

Because we currently call g_byte_array_free() with free_segment=TRUE, we
end up passing data=NULL to fw_cfg_add_file().

On the plus side, fw_cfg_data_read() and fw_cfg_dma_transfer() both deal
with NULL data gracefully: QEMU does not crash when the guest reads such
an item, the guest just gets a properly sized, but zero-filled blob.

However, the bug breaks UEFI HTTPS boot, as the IANA_TLS_CIPHER array,
generated otherwise correctly by the "tls-cipher-suites" object, is in
effect replaced with a zero blob.

Fix the issue by passing free_segment=FALSE to g_byte_array_free():

- the caller (fw_cfg_add_from_generator()) temporarily assumes ownership
  of the generated byte array,

- then ownership of the byte array is transfered to fw_cfg, as
  fw_cfg_add_file() links (not copies) "data" into fw_cfg.

Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 3203148917d035b09f71986ac2eaa19a352d6d9d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200916151510.22767-1-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200918' into staging

Aspeed patches :

* Couple of cleanups
* New machine properties to define the flash models

# gpg: Signature made Fri 18 Sep 2020 08:23:19 BST
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-aspeed-20200918:
  misc: aspeed_scu: Update AST2600 silicon id register
  hw/arm/aspeed: Add machine properties to define the flash models
  hw/arm/aspeed: Map the UART5 device unconditionally

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docker.py: always use --rm

Avoid that containers pile up.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

misc: aspeed_scu: Update AST2600 silicon id register

Aspeed have released an updated datasheet (v7) containing the silicon id
for the AST2600 A2. It looks like this:

              SCU004      SCU014
  AST2600-A0  0x05000303  0x05000303
  AST2600-A1  0x05010303  0x05010303
  AST2600-A2  0x05010303  0x05020303
  AST2620-A1  0x05010203  0x05010203
  AST2620-A2  0x05010203  0x05020203

The SCU004 (silicon id 1) value matches SCU014 for A0, but for
subsequent revisions it is hard coded to the A1 value.

Qemu effectively dropped support for the A0 in 7582591ae745 ("aspeed:
Support AST2600A1 silicon revision") as the A0 reset table was removed,
so it makes sense to only support the behaviour of A1 and onwards.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200916082012.776628-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Add machine properties to define the flash models

Some machines don't have much differences a part from the flash model
being used. Introduce new machine properties to change them from the
command line.

For instance, to start the ast2500-evb machine with a different FMC
chip and a 64M SPI chip, use :

  -M ast2500-evb,fmc-model=mx25l25635e,spi-model=mx66u51235f

Cc: 郁雷 <yulei.sh@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Message-Id: <20200915054859.2338477-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/arm/aspeed: Map the UART5 device unconditionally

The UART5 is present on the machine regardless there is a
character device connected to it. Map it unconditionally.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200905212415.760452-1-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

Merge remote-tracking branch 'remotes/kraxel/tags/microvm-20200917-pull-request' into staging

microvm: add acpi support

# gpg: Signature made Thu 17 Sep 2020 14:53:06 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/microvm-20200917-pull-request: (21 commits)
  microvm: enable ramfb
  tests/acpi: update expected data files for microvm
  tests/acpi: add microvm test
  tests/acpi: allow override blkdev
  tests/acpi: allow microvm test data updates.
  microvm: wire up hotplug
  x86: move cpu hotplug from pc to x86
  x86: move acpi_dev from pc/microvm
  x86: constify x86_machine_is_*_enabled
  microvm/acpi: disable virtio-mmio cmdline hack
  microvm/acpi: use seabios with acpi=on
  microvm/acpi: use GSI 16-23 for virtio
  microvm/acpi: add acpi_dsdt_add_virtio() for x86
  microvm/acpi: add minimal acpi support
  microvm: make virtio irq base runtime configurable
  acpi: move acpi_dsdt_add_power_button() to ged
  acpi: ged: add x86 device variant.
  acpi: ged: add control regs
  seabios: add bios-microvm.bin binary
  seabios: add microvm config, update build rules
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

contrib/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the contrib folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-11-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

qapi/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the qapi folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200917075029.313-10-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

disas/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the disas folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the linux-user folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-7-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

util/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the util folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-6-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

scripts/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the scripts folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-5-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

docs/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the docs folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-4-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

migration/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the migration folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-3-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

qemu/: fix some comment spelling errors

I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/stsquad/tags/pull-configure-fixes-160920-1' into staging

configure tweaks for deprecation

  - iotest fix for readlink -f
  - linux-user, report rather than assert on mmap failure
  - clean-up and re-factor the logic
  - add tilegx-linux-user to deprecated_targets_list
  - add [lm32|unicore32]-softmmu deprecated_targets_list
  - add a gitlab deprecated builds test

# gpg: Signature made Wed 16 Sep 2020 10:11:41 BST
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-configure-fixes-160920-1:
  configure: add [lm32|unicore32]-softmmu to deprecation logic
  gitlab: create a build-deprecated target
  configure: include tilegx-linux-user in the deprecation logic
  configure: clean-up the target-list-exclude logic
  configure: also skip deprecated targets with target-list-exclude
  configure: move deprecated feature processing to supported_target
  iotests: Drop readlink -f
  linux-user: test, don't assert addr != test in pgb_reserved_va

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-09-16' into staging

* Fix "readlink -f" problem in iotests on macOS (to fix the Cirrus-CI tests)
* Some minor qtest improvements
* Fix the unit tests to work on MSYS2, too
* Enable building and testing on MSYS2 in the Cirrus-CI
* Build FreeBSD with one task again in the Cirrus-CI

# gpg: Signature made Wed 16 Sep 2020 12:24:29 BST
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2020-09-16: (24 commits)
  cirrus: Building freebsd in a single shot
  ci: Enable msys2 ci in cirrus
  tests: Fixes test-qdev-global-props.c
  tests: fix test-util-sockets.c
  tests: Fixes test-io-channel-file by mask only owner file state mask bits
  tests: fixes aio-win32 about aio_remove_fd_handler, get it consistence with aio-posix.c
  tests: Fixes test-io-channel-socket.c tests under msys2/mingw
  vmstate: Fixes test-vmstate.c on msys2/mingw
  meson: remove empty else and duplicated gio deps
  meson: Use -b to ignore CR vs. CR-LF issues on Windows
  osdep: file locking functions are not available on Win32
  tests: test-replication disable /replication/secondary/* on msys2/mingw.
  tests: Fixes test-replication.c on msys2/mingw.
  meson: disable crypto tests are empty under win32
  meson: Disable test-char on msys2/mingw for fixing tests stuck
  rcu: fixes test-logging.c by call drain_call_rcu before rmdir_full
  tests: Convert g_free to g_autofree macro in test-logging.c
  rcu: Implement drain_call_rcu
  qga/commands-win32: Fix problem with redundant protype declaration
  Simplify the .gitignore file
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

microvm: enable ramfb

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200915120909.20838-22-kraxel@redhat.com

tests/acpi: update expected data files for microvm

Also clear tests/qtest/bios-tables-test-allowed-diff.h

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200915120909.20838-21-kraxel@redhat.com

tests/acpi: add microvm test

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-20-kraxel@redhat.com

tests/acpi: allow override blkdev

microvm needs virtio-blk instead of ide.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-19-kraxel@redhat.com

tests/acpi: allow microvm test data updates.

Also add empty test data files.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200915120909.20838-18-kraxel@redhat.com

microvm: wire up hotplug

The cpu hotplug code handles the initialization of coldplugged cpus
too, so it is needed even in case cpu hotplug is not supported.

Wire cpu hotplug up for microvm.
Without this we get a broken MADT table.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-17-kraxel@redhat.com

x86: move cpu hotplug from pc to x86

The cpu hotplug code handles the initialization of coldplugged cpus
too, so it is needed even in case cpu hotplug is not supported.

Move the code from pc to x86, so microvm can use it.

Move both plug and unplug to keep everything in one place, even
though microvm needs plug only.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-16-kraxel@redhat.com

x86: move acpi_dev from pc/microvm

Both pc and microvm machine types have a acpi_dev field.
Move it to the common base type.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-15-kraxel@redhat.com

x86: constify x86_machine_is_*_enabled

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200915120909.20838-14-kraxel@redhat.com

microvm/acpi: disable virtio-mmio cmdline hack

... in case we are using ACPI.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-13-kraxel@redhat.com

microvm/acpi: use seabios with acpi=on

With acpi=off continue to use qboot.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-12-kraxel@redhat.com

microvm/acpi: use GSI 16-23 for virtio

With ACPI enabled and IO-APIC being properly declared in the ACPI tables
we can use interrupt lines 16-23 for virtio and avoid shared interrupts.

With acpi disabled we continue to use lines 5-12.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-11-kraxel@redhat.com

microvm/acpi: add acpi_dsdt_add_virtio() for x86

Makes x86 linux kernel find virtio-mmio devices automatically.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-10-kraxel@redhat.com

microvm/acpi: add minimal acpi support

$subject says all.  Can be controlled using -M microvm,acpi=on/off.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-9-kraxel@redhat.com

microvm: make virtio irq base runtime configurable

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-8-kraxel@redhat.com

acpi: move acpi_dsdt_add_power_button() to ged

Allow reuse for microvm.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-7-kraxel@redhat.com

acpi: ged: add x86 device variant.

Set AcpiDeviceIfClass->madt_cpu,
otherwise identical to TYPE_ACPI_GED.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-6-kraxel@redhat.com

acpi: ged: add control regs

Add control regs (sleep, reset) for hw-reduced acpi.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-5-kraxel@redhat.com

seabios: add bios-microvm.bin binary

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-4-kraxel@redhat.com

seabios: add microvm config, update build rules

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-3-kraxel@redhat.com

microvm: name qboot binary qboot.rom

qboot isn't a bios and shouldnt be named that way.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200915120909.20838-2-kraxel@redhat.com

Merge remote-tracking branch 'remotes/berrange/tags/block-odirect-pull-request' into staging

block: improve error reporting for unsupported O_DIRECT

# gpg: Signature made Wed 16 Sep 2020 10:45:48 BST
# gpg:                using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/block-odirect-pull-request:
  block/file: switch to use qemu_open/qemu_create for improved errors
  util: give a specific error message when O_DIRECT doesn't work
  util: introduce qemu_open and qemu_create with error reporting
  util: add Error object for qemu_open_internal error reporting
  util: refactor qemu_open_old to split off variadic args handling
  util: rename qemu_open() to qemu_open_old()
  util: split off a helper for dealing with O_CLOEXEC flag
  monitor: simplify functions for getting a dup'd fdset entry

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20200915' into staging

The intention of the following two patches is making users aware about
the negative file I/O performance impact when using a very low value
for 9P client parameter 'msize', which especially is the case if no
'msize' parameter was supplied by the user with a 9P Linux client at all.

All it does is logging a performance warning on host side (once) in
that case. By setting 'msize' on client side to any value larger than
8192 the performance warning will disappear.

See https://wiki.qemu.org/Documentation/9psetup#msize for details.

# gpg: Signature made Tue 15 Sep 2020 11:37:32 BST
# gpg:                using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg:                issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38  4926 30DB 47C3 A012 D5F4
#      Subkey fingerprint: 96D8 D110 CF7A F808 4F88  5901 34C2 B587 65A4 7395

* remotes/cschoenebeck/tags/pull-9p-20200915:
  9pfs: disable msize warning for synth driver
  9pfs: log warning if msize <= 8192

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

cirrus: Building freebsd in a single shot

This reverts commit 45f7b7b9f38f5c4d1529a37c93dedfc26a231bba
("cirrus.yml: Split FreeBSD job into two parts").

freebsd 1 hour limit not hit anymore

I think we going to a wrong direction, I think there is some tests a stall the test runner,
please look at
https://cirrus-ci.com/task/5110577531977728
When its running properly, the consumed time are little, but when tests running too long,
look at the cpu usage, the cpu usage are nearly zero. doesn't consuming time.

And look at
https://cirrus-ci.com/task/6119341601062912

If the tests running properly, the time consuming are little
We should not hide the error by split them

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ed Maste <emaste@FreeBSD.org>
Message-Id: <20200915121318.247-16-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

ci: Enable msys2 ci in cirrus

Install msys2 in a proper way refer to:
 https://github.com/cirruslabs/cirrus-ci-docs/issues/699
The https://wiki.qemu.org/Hosts/W32#Native_builds_with_MSYS2 need to be updated.
There is no need of --cross-prefix, open mingw64.exe instead of msys2.exe then
we don't need the --cross-prefix, besides we use environment variable settings:
    MSYS: winsymlinks:nativestrict
    MSYSTEM: MINGW64
    CHERE_INVOKING: 1
to opening mingw64 native shell.

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-25-luoyonggang@gmail.com>
[thuth: Add --target-list-exclude to speed it up a little bit, and
        add capstone package to avoid build failure with internal capstone]
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests: Fixes test-qdev-global-props.c

On win32 the line ending are \r\n, so we skip the \n in function test_dynamic_globalprop

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915171234.236-22-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests: fix test-util-sockets.c

Fixes following errors:
Running test test-util-sockets
ERROR test-util-sockets - missing test plan

# Start of name tests
**
ERROR:../tests/test-util-sockets.c:93:test_socket_fd_pass_name_good: assertion failed (fd != -1): (-1 != -1)
Bail out! ERROR:../tests/test-util-sockets.c:93:test_socket_fd_pass_name_good: assertion failed (fd != -1): (-1 != -1)

First should call to qemu_init_main_loop before socket_init,
then on win32 doesn't support for SOCKET_ADDRESS_TYPE_FD socket type

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-21-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests: Fixes test-io-channel-file by mask only owner file state mask bits

This is the error on msys2/mingw
Running test test-io-channel-file
**
ERROR:../tests/test-io-channel-file.c:59:test_io_channel_file_helper: assertion failed (TEST_MASK & ~mask == st.st_mode & 0777): (384 == 438)
ERROR test-io-channel-file - Bail out! ERROR:../tests/test-io-channel-file.c:59:test_io_channel_file_helper: assertion failed (TEST_MASK & ~mask == st.st_mode & 0777): (384 == 438)

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915171234.236-20-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests: fixes aio-win32 about aio_remove_fd_handler, get it consistence with aio-posix.c

This is a fixes for
(C:\work\xemu\qemu\build\tests\test-aio-multithread.exe:19100): GLib-CRITICAL **: 23:03:24.965: g_source_remove_poll: assertion '!SOURCE_DESTROYED (source)' failed
ERROR test-aio-multithread - Bail out! GLib-FATAL-CRITICAL: g_source_remove_poll: assertion '!SOURCE_DESTROYED (source)' failed

(C:\work\xemu\qemu\build\tests\test-bdrv-drain.exe:21036): GLib-CRITICAL **: 23:03:29.861: g_source_remove_poll: assertion '!SOURCE_DESTROYED (source)' failed
ERROR test-bdrv-drain - Bail out! GLib-FATAL-CRITICAL: g_source_remove_poll: assertion '!SOURCE_DESTROYED (source)' failed

And the idea comes from https://patchwork.kernel.org/patch/9975239/

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200915171234.236-19-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

block/file: switch to use qemu_open/qemu_create for improved errors

Currently at startup if using cache=none on a filesystem lacking
O_DIRECT such as tmpfs, at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument

while at QMP level the hint is missing, so QEMU reports just

  "error": {
      "class": "GenericError",
      "desc": "Could not open '/tmp/foo.img': Invalid argument"
  }

which is close to useless for the end user trying to figure out what
they did wrong.

With this change at startup QEMU prints

qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img': filesystem does not support O_DIRECT

while at the QMP level QEMU reports a massively more informative

  "error": {
     "class": "GenericError",
     "desc": "Unable to open '/tmp/foo.img': filesystem does not support O_DIRECT"
  }

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

util: give a specific error message when O_DIRECT doesn't work

A common error scenario is to tell QEMU to use O_DIRECT in combination
with a filesystem that doesn't support it. To aid users to diagnosing
their mistake we want to provide a clear error message when this happens.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

util: introduce qemu_open and qemu_create with error reporting

qemu_open_old() works like open(): set errno and return -1 on failure.
It has even more failure modes, though.  Reporting the error clearly
to users is basically impossible for many of them.

Our standard cure for "errno is too coarse" is the Error object.
Introduce two new helper methods:

  int qemu_open(const char *name, int flags, Error **errp);
  int qemu_create(const char *name, int flags, mode_t mode, Error **errp);

Note that with this design we no longer require or even accept the
O_CREAT flag. Avoiding overloading the two distinct operations
means we can avoid variable arguments which would prevent 'errp' from
being the last argument. It also gives us a guarantee that the 'mode' is
given when creating files, avoiding a latent security bug.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

util: add Error object for qemu_open_internal error reporting

Instead of relying on the limited information from errno, we can now
also provide detailed error messages to callers that ask for it.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

util: refactor qemu_open_old to split off variadic args handling

This simple refactoring prepares for future patches. The variadic args
handling is split from the main bulk of the open logic.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

util: rename qemu_open() to qemu_open_old()

We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

util: split off a helper for dealing with O_CLOEXEC flag

We're going to have multiple callers to open() from qemu_open()
soon. Readability would thus benefit from having a helper for
dealing with O_CLOEXEC.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

monitor: simplify functions for getting a dup'd fdset entry

Currently code has to call monitor_fdset_get_fd, then dup
the return fd, and then add the duplicate FD back into the
fdset. This dance is overly verbose for the caller and
introduces extra failure modes which can be avoided by
folding all the logic into monitor_fdset_dup_fd_add and
removing monitor_fdset_get_fd entirely.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

scripts/git.orderfile: Display meson files along with buildsys ones

Since commit a56650518f5 ("configure: integrate Meson in the build
system") we replaced many Makefile by Meson files. Adapt the
git.orderfile script to display the new file at the same position.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200907161222.41915-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/timer/hpet: Fix debug format strings

Fix compiler errors when compiling with -DHPET_DEBUG due to mismatch
between format string token "%x" and the argument type uint64_t.

Also "%#x" is replaced by "0x%" PRIx64 according to the coding style.

Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200909083650.46771-3-dovmurik@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw

Fix compiler error about defined but not used functions when compiling
with -DHPET_DEBUG by deleting the unused debug functions hpet_ram_readb
and hpet_ram_readw.

Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200909083650.46771-2-dovmurik@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

meson: remove empty else and duplicated gio deps

Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200915171234.236-14-luoyonggang@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

configure: add [lm32|unicore32]-softmmu to deprecation logic

While we are at it move the few places where they are into the
deprecation build bucket.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200915134317.11110-9-alex.bennee@linaro.org>