qga: Improve error for guest-set-user-password parameter @crypted

The Windows version of guest-set-user-password rejects argument
"crypted": true with the rather useless "this feature or command is
not currently supported".  Improve to "'crypted' must be off on this
host".

QERR_UNSUPPORTED is now unused.  Drop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240911131206.2503035-3-armbru@redhat.com>

qga/qapi-schema: Drop obsolete note on "unsupported" errors

The note talks about "unsupported" errors and QERR_UNSUPPORTED.  The
former is vague, and the latter makes sense only in C, not in external
interface documentation.  Fortunately, we don't have to address this
anymore: recent merge commit 3b5efc553eb got rid of these errors.
Delete the note.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240911131206.2503035-2-armbru@redhat.com>

Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20241016

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg:                using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C  6C2C 40A2 FFF2 3926 3EDF

* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
  hw/loongarch/fw_cfg: Build in common_ss[]
  hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
  target/loongarch: Avoid bits shift exceeding width of bool type
  hw/loongarch/virt: Add FDT table support with acpi ged pm register
  acpi: ged: Add macro for acpi sleep control register

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'single-binary-20241015' of https://github.com/philmd/qemu into staging

Remove some target-specific endianness knowledge from target/.

For MIPS, propagate endianness at the board level, using QOM property.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmcOihcACgkQ4+MsLN6t
# wN4VaRAAor+5gUJiV0OOMQVfP8e1o9ssKcYy9m31zLeii1Iq2M/2oz6YK4OjdQDe
# oJ8VRJvBPKC2Bpi14TfKsSGaP8CGNO/hdxcMi71pjHZC+bjHt5Uv0U/7T4XCBWuV
# N+85juN1PTc4cci4FkGIXaPB1YWL00L56BDCzja0uhLF4+Xe2eYGVrPXeFCkN/3I
# Ky7jHlB/dgzc47kTXvg5snCee2egDFf/x4igwZj6+gWJyo+jubRpwoOqKbK2M0Nd
# VvNpBVFNGZMP3Fn9lh45uDOuRWGu6zSIPBVkjoFc+wdGsFsITIMrZ3h46UffsGTJ
# F1j6Zsq6hoLbaNRRjZ6OsN6u683oo1lknmWauD62LrjXcX0RlRwRFbMD0AjedR8t
# 6+YHg5LlwGg6r/AOtEe28ggXZohB2vjr2V0MJm1x/XgLYhFHoN3//jxn22oOHj4p
# 0z3+eDc3Se8JNRV6jPMHbbuTqZqZjRgVFbYN3aMbdoXYzhpYnrPj6f7WQL2smiAW
# C2vdswrubQWKou1wcn6rbg0nnMRVTh+GxrtZ3mkgaxNzgNFxsrX8YubMsh77XUcr
# mnCGj1tE3hp40xsuSk6yZXY3ZZiTyZasvO1wq4gWOI9le0Zmq+d335F9+IVJ8RlP
# YhA+MY5aeomsixVRdmrPrgOfanQiHXv02lsbperU8QFfGRhf2Y8=
# =Qydb
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Oct 2024 16:28:23 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* tag 'single-binary-20241015' of https://github.com/philmd/qemu: (33 commits)
  hw/mips: Have mips_cpu_create_with_clock() take an endianness argument
  hw/mips/cps: Set the vCPU 'cpu-big-endian' property
  target/mips: Expose MIPSCPU::is_big_endian property
  target/mips: Use tcg_constant_tl() instead of tcg_gen_movi_tl()
  target/mips: Use gen_op_addr_addi() when possible
  target/mips: Have gen_addiupc() expand $pc during translation
  target/mips: Replace MO_TE by mo_endian()
  target/mips: Introduce mo_endian() helper
  target/mips: Remove unused MEMOP_IDX() macro
  target/mips: Rename unused sysemu argument of OP_LD_ATOMIC()
  target/mips: Explode MO_TExx -> MO_TE | MO_xx
  target/mips: Factor mo_endian_rev() out of MXU code
  target/mips: Convert mips16e decr_and_load/store() macros to functions
  target/mips: Replace MO_TE by  mo_endian_env() in get_pte()
  target/mips: Introduce mo_endian_env() helper
  target/mips: Rename cpu_is_bigendian() -> disas_is_bigendian()
  target/mips: Declare mips_env_is_bigendian() in 'internal.h'
  hw/xtensa/xtfpga: Remove TARGET_BIG_ENDIAN #ifdef'ry
  target/ppc: Use tcg_constant_tl() instead of tcg_gen_movi_tl()
  target/tricore: Use tcg_constant_tl() instead of tcg_gen_movi_tl()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/loongarch/fw_cfg: Build in common_ss[]

Nothing in LoongArch fw_cfg.c requires target specific definitions.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-3-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>

hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-2-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>

target/loongarch: Avoid bits shift exceeding width of bool type

Variable env->cf[i] is defined as bool type, it is treated as int type
with shift operation. However the max possible width is 56 for the shift
operation, exceeding the width of int type. And there is existing api
read_fcc() which is converted to u64 type with bitwise shift, it can be
used to dump fp registers into coredump note segment.

Resolves: Coverity CID 1561133
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240914064645.2099169-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

hw/loongarch/virt: Add FDT table support with acpi ged pm register

ACPI ged is used for power management on LoongArch virt platform, in
general it is parsed from acpi table. However if system boot directly from
elf kernel, no UEFI bios is provided and acpi table cannot be used also.

Here acpi ged pm register is exposed with FDT table, it is compatbile
with syscon method in FDT table, only that acpi ged pm register is accessed
with 8-bit mode, rather with 32-bit mode.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918014206.2165821-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

acpi: ged: Add macro for acpi sleep control register

Macro definition is added for acpi sleep control register, ged emulation
driver can use the macro , also it can be used in FDT table if ged is
exposed with FDT table.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240918014206.2165821-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

hw/mips: Have mips_cpu_create_with_clock() take an endianness argument

mips_cpu_create_with_clock() creates a vCPU. Pass it the vCPU
endianness requested by argument. Update the board call sites.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-17-philmd@linaro.org>

hw/mips/cps: Set the vCPU 'cpu-big-endian' property

Have the CPS expose a 'cpu-big-endian' property so it can
set it to the vCPUs it creates.
Note, since the number of vCPUs created is dynamic, we can
not use QOM aliases.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-16-philmd@linaro.org>

target/mips: Expose MIPSCPU::is_big_endian property

Add the "big-endian" property and set the CP0C0_BE bit in CP0_Config0.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-15-philmd@linaro.org>

target/mips: Use tcg_constant_tl() instead of tcg_gen_movi_tl()

Directly use tcg_constant_tl() for constant integer, this
save a call to tcg_gen_movi_tl(), often saving a temp register.

Most of the places found using the following Coccinelle spatch script:

  @@
  identifier tmp;
  constant val;
  @@
  *    TCGv tmp = tcg_temp_new();
       ...
  *    tcg_gen_movi_tl(tmp, val);

  @@
  identifier tmp;
  int val;
  @@
  *    TCGv tmp = tcg_temp_new();
       ...
  *    tcg_gen_movi_i64(tmp, val);

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-2-philmd@linaro.org>

target/mips: Use gen_op_addr_addi() when possible

Replace tcg_gen_movi_tl() + gen_op_addr_add() by a single
gen_op_addr_addi() call.

gen_op_addr_addi() calls tcg_gen_addi_tl() which might
optimize if the immediate is zero.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-13-philmd@linaro.org>

target/mips: Have gen_addiupc() expand $pc during translation

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-12-philmd@linaro.org>

target/mips: Replace MO_TE by mo_endian()

Replace compile-time MO_TE evaluation by runtime mo_endian() one,
which expand target endianness from DisasContext.

Mechanical change using:

  $ sed -i -e 's/MO_TE/mo_endian(ctx)/' \
     $(git grep -l MO_TE target/mips)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-11-philmd@linaro.org>

target/mips: Introduce mo_endian() helper

Introduce mo_endian() which returns the endian MemOp
corresponding to the vCPU DisasContext.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-10-philmd@linaro.org>

target/mips: Remove unused MEMOP_IDX() macro

MEMOP_IDX() is unused since commit 948f88661c6 ("target/mips:
Use cpu_*_data_ra for msa load/store"), remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241014232235.51988-1-philmd@linaro.org>

target/mips: Rename unused sysemu argument of OP_LD_ATOMIC()

In commit 6d0cad12594 ("target/mips: Finish conversion to
tcg_gen_qemu_{ld,st}_*") we renamed the argument of the user
definition. Rename the system part for coherency. Since the
argument is ignored, prefix with 'ignored_'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-9-philmd@linaro.org>

target/mips: Explode MO_TExx -> MO_TE | MO_xx

Extract the implicit MO_TE definition in order to replace
it by runtime variable in the next commit.

Mechanical change using:

  $ for n in UW UL UQ UO SW SL SQ; do \
      sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
           $(git grep -l MO_TE$n target/mips); \
    done

manually remove superfluous parenthesis in nanoMIPS gen_save().

Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-8-philmd@linaro.org>

target/mips: Factor mo_endian_rev() out of MXU code

Instead of swapping the reversed target endianness
using MO_BSWAP, directly return the correct endianness.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-7-philmd@linaro.org>

target/mips: Convert mips16e decr_and_load/store() macros to functions

Functions are easier to rework than macros. Besides,
there is no gain here in inlining these.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-6-philmd@linaro.org>

target/mips: Replace MO_TE by  mo_endian_env() in get_pte()

Replace compile-time MO_TE evaluation by runtime mo_endian_env()
one, which expand target endianness from vCPU env.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-5-philmd@linaro.org>

target/mips: Introduce mo_endian_env() helper

Introduce mo_endian_env() which returns the endian
MemOp corresponding to the vCPU env.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-4-philmd@linaro.org>

target/mips: Rename cpu_is_bigendian() -> disas_is_bigendian()

Methods using the 'cpu_' prefix usually take a (Arch)CPUState
argument. Since this method takes a DisasContext argument,
rename it as disas_is_bigendian().

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-3-philmd@linaro.org>

target/mips: Declare mips_env_is_bigendian() in 'internal.h'

In order to re-use cpu_is_bigendian(), declare it on "internal.h"
after renaming it as mips_env_is_bigendian().

Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-2-philmd@linaro.org>

hw/xtensa/xtfpga: Remove TARGET_BIG_ENDIAN #ifdef'ry

Move code evaluation from preprocessor to compiler so
both if() ladders are processed. Mostly style change.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240930073450.33195-8-philmd@linaro.org>

target/ppc: Use tcg_constant_tl() instead of tcg_gen_movi_tl()

Directly use tcg_constant_tl() for constant integer,
this save a call to tcg_gen_movi_tl() and a temp register.

Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-4-philmd@linaro.org>

target/tricore: Use tcg_constant_tl() instead of tcg_gen_movi_tl()

Directly use tcg_constant_tl() for constant integer,
this save a call to tcg_gen_movi_tl().

Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-3-philmd@linaro.org>

target/tricore: Use explicit little-endian LD/ST API

The TriCore architecture uses little endianness. Directly use
the little-endian LD/ST API.

Mechanical change using:

  $ end=le; \
    for acc in uw w l q tul; do \
      sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
             -e "s/st${acc}_p(/st${acc}_${end}_p(/" \
        $(git grep -wlE '(ld|st)t?u?[wlq]_p' target/tricore/); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-15-philmd@linaro.org>

target/loongarch: Use explicit little-endian LD/ST API

The LoongArch architecture uses little endianness. Directly
use the little-endian LD/ST API.

Mechanical change using:

  $ end=le; \
    for acc in uw w l q tul; do \
      sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
             -e "s/st${acc}_p(/st${acc}_${end}_p(/" \
        $(git grep -wlE '(ld|st)t?u?[wlq]_p' target/loongarch/); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-13-philmd@linaro.org>

linux-user/i386: Use explicit little-endian LD/ST API

The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-4-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/avr: Use explicit little-endian LD/ST API

The AVR architecture uses little endianness. Directly use
the little-endian LD/ST API.

Mechanical change using:

  $ end=le; \
    for acc in uw w l q tul; do \
      sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
             -e "s/st${acc}_p(/st${acc}_${end}_p(/" \
        $(git grep -wlE '(ld|st)t?u?[wlq]_p' target/avr/); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-11-philmd@linaro.org>

hw/i386: Use explicit little-endian LD/ST API

The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.

Mechanical change using:

  $ end=le; \
    for acc in uw w l q tul; do \
      sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
             -e "s/st${acc}_p(/st${acc}_${end}_p(/" \
        $(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/i386/); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-9-philmd@linaro.org>

target/hexagon: Use explicit little-endian LD/ST API

The Hexagon architecture uses little endianness. Directly use
the little-endian LD/ST API.

Mechanical change using:

  $ end=le; \
    for acc in uw w l q tul; do \
      sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
             -e "s/st${acc}_p(/st${acc}_${end}_p(/" \
        $(git grep -wlE '(ld|st)t?u?[wlq]_p' target/hexagon/); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-8-philmd@linaro.org>

target/alpha: Use explicit little-endian LD/ST API

The Alpha architecture uses little endianness. Directly use
the little-endian LD/ST API.

Mechanical change using:

  $ end=le; \
    for acc in uw w l q tul; do \
      sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
             -e "s/st${acc}_p(/st${acc}_${end}_p(/" \
        $(git grep -wlE '(ld|st)t?u?[wlq]_p' target/alpha/); \
    done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-7-philmd@linaro.org>

gdbstub/helpers: Introduce ldtul_$endian_p() helpers

Introduce ldtul_le_p() and ldtul_be_p() to use directly
in place of ldtul_p() when a target endianness is fixed.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010175246.15779-3-philmd@linaro.org>

target/alpha: Replace ldtul_p() -> ldq_p()

The Alpha target is only built for 64-bit.
Using ldtul_p() is pointless, replace by ldq_p().

Mechanical change doing:

  $ sed -i -e 's/ldtul_p/ldq_p/' $(git grep -wl ldtul_p target/alpha/)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-4-philmd@linaro.org>

target/hexagon: Replace ldtul_p() -> ldl_p()

The Hexagon target is only built for 32-bit.
Using ldtul_p() is pointless, replace by ldl_p().

Mechanical change doing:

  $ sed -i -e 's/ldtul_p/ldl_p/' \
      $(git grep -wl ldtul_p target/hexagon/)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-3-philmd@linaro.org>

exec/memop: Remove unused memop_big_endian() helper

Last use of memop_big_endian() was removed in commit 592134617c9
("accel/tcg: Reorg system mode store helpers").

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-3-philmd@linaro.org>

exec/tswap: Massage target_needs_bswap() definition

Invert target_needs_bswap() comparison to match the
COMPILING_PER_TARGET definition (2 lines upper).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010175246.15779-2-philmd@linaro.org>

qemu/bswap: Undefine CPU_CONVERT() once done

Better undefined macros once we are done with them,
like we do few lines later with DO_STN_LDN_P().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-2-philmd@linaro.org>

Merge tag 'pull-target-arm-20241015-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * hw/arm/omap1: Remove unused omap_uwire_attach() method
 * stm32f405: Add RCC device to stm32f405 SoC
 * arm/gicv3: add missing casts
 * hw/misc: Create STM32L4x5 SYSCFG clock
 * hw/arm: Add SPI to Allwinner A10
 * hw/intc/omap_intc: Remove now-unnecessary abstract base class
 * hw/char/pl011: Use correct masks for IBRD and FBRD
 * docs/devel: Convert txt files to rST
 * Remove MAX111X, MAX7310, DSCM-1XXXX, pcmcia devices (used only
   by now-removed omap/pxa2xx boards)
 * vl.c: Remove pxa2xx-specific -portrait and -rotate options
 * dma: Fix function names in documentation
 * hw/arm/xilinx_zynq: Add various missing unimplemented devices

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmcOeWEZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jCMD/482mpT1s+mrEJFWSJJXU4G
# 8kr4Zj6+NafbayJ0vHTkpSbkEbPxuvDiUqmlnbI+3o11i+Z3IyiaGZbba7dyNnKl
# 02MdQavL0dB+eMrcFNofRRvwvsposuj2ixgwTQe6L32HSFdHerVVwuhHM/wfwyCh
# DKt7gPRovD/7CtwDOSpyW7cK64WK1IUlE8VEsbFdQbCPkopm55LQ2sLT4TshadpG
# A6xcxyLN0x/lHgCmvijB1T09LSc1nQpUEQNIokC4f1Rmy6HNgGDYY1G7GAJf99mT
# nWhATuuhZThiYfRbN5KQoS9tGEUduxtkGhHiOgpdXpgc3cS7RusCHoqAnibpsVh3
# TgAkaRAX1d/jQ2KYR2h2jI3nh66ObhrFRT3dkzRZrIvmK9zeWUKmS9lzZ94aVfPH
# +MtBPwsO5OhzEABs8WpMY9V1nYaYDsFATMc1akUSaSLn1Er9Uz66NIk+J4Lob4P0
# 78IPvTmwvAIITiqQvkISsc37n5a2/toeaffU2hPKtQLlhyilWynEZA5YItrXSTuk
# gYIBxyZSbzGj/ofZ9T9C0GDLbhJp9ksNIpIqRUiHOH3z9b85r7HVZORp+COw/ZXR
# UGak6rpJ+XVOxVL/cPRTvZB0RbUHIZh7WLNH2G7Tfv4E4llqL81iuImHXVh/2CXO
# 9GWr9qbDLDYQ+BI7ipLAYg==
# =n2CA
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Oct 2024 15:17:05 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20241015-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
  hw/arm/xilinx_zynq: Add various missing unimplemented devices
  dma: Fix function names in documentation
  vl.c: Remove pxa2xx-specific -portrait and -rotate options
  hw/block: Remove ecc
  hw: Remove PCMCIA subsystem
  hw/ide: Remove DSCM-1XXXX microdrive device model
  hw/gpio: Remove MAX7310 device
  hw/adc: Remove MAX111X device
  docs/devel/lockcnt: Include kernel-doc API documentation
  include: Move QemuLockCnt APIs to their own header
  docs/devel/rcu: Convert to rST format
  docs/devel/multiple-iothreads: Convert to rST format
  docs/devel/lockcnt: Convert to rST format
  docs/devel/blkverify: Convert to rST format
  docs/devel/blkdebug: Convert to rST format
  hw/char/pl011: Use correct masks for IBRD and FBRD
  hw/intc/omap_intc: Remove now-unnecessary abstract base class
  hw/arm: Add SPI to Allwinner A10
  hw/ssi: Allwinner A10 SPI emulation
  tests/qtest: Check STM32L4x5 clock connections
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xilinx_zynq: Add various missing unimplemented devices

Add unimplemented-device blocks to the xilinx_zynq board
corresponding to various devices documented in the TRM
and in the device tree.

See: ug585-Zynq-7000-TRM manual B.3 (Module Summary)

Signed-off-by: Chao Liu <chao.liu@yeah.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message. Removed the clearing of
 the ignore_memory_transaction_failures flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dma: Fix function names in documentation

Ensure the function names match.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20241012-dma-v2-1-6afddf5f3c8d@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

vl.c: Remove pxa2xx-specific -portrait and -rotate options

The ``-portrait`` and ``-rotate`` options were documented as only
working with the PXA LCD device, and all the machine types using
that display device were removed in 9.2.

These options were intended to simulate a mobile device being
rotated by the user, and had three effects:
 * the display output was rotated by 90, 180 or 270 degrees
   (implemented in the PXA display device models)
 * the mouse/trackpad input was rotated the opposite way
   (implemented in generic code)
 * the machine model would signal to the guest about its
   orientation
   (implemented by e.g. the spitz machine model)

Of these three things, the input-rotation was coded without being
restricted to boards which supported the full set of device-rotation
handling, so in theory the options were usable on other machine
models with odd effects (rotating input but not display output).  But
this was never intended or documented behaviour, so we can reasonably
drop these command line arguments without a formal deprecate-and-drop
cycle for them.

Remove the options, and their implementation and documentation.
Describe the removal in removed-features.rst.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-7-peter.maydell@linaro.org

hw/block: Remove ecc

The ecc.c code was used only by the PXA2xx and OMAP2 SoC devices,
which we have removed, so it is now completely unused.

Note that hw/misc/eccmemctl.c does not in fact use any of the
code frome ecc.c, so that KConfig dependency was incorrect.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-6-peter.maydell@linaro.org

hw: Remove PCMCIA subsystem

The only PCMCIA subsystem was the PXA2xx SoC and the machines
using it, which have now been removed. Although in theory
we have a few machine types which have PCMCIA (e.g. kzm,
the strongarm machines, sh4's sh7750), none of those machines
implement their PCMCIA controller, and they're all old and
no longer very interesting machine types.

Rather than keeping all the PCMCIA code in-tree without any
active users of it, delete it. If we need PCMCIA in future
we can always resurrect it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241003140010.1653808-5-peter.maydell@linaro.org

hw/ide: Remove DSCM-1XXXX microdrive device model

The DSCM-1XXXX microdrive device model was used only by the
XScale-based Zaurus machine types.  Now they have been removed, we
can delete this device too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-4-peter.maydell@linaro.org

hw/gpio: Remove MAX7310 device

The MAX7310 GPIO controller was used only by the XScale-based Zaurus
machine types.  Now they have been removed we can remove this device
model as well.

Because this device is an I2C device, in theory it could be created
by users on the command line for boards with a different I2c
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs/outputs.
The only example a web search produces for "device max7310" is a user
trying to create this because they didn't realize that there was no
way to manipulate the GPIO lines.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-3-peter.maydell@linaro.org

hw/adc: Remove MAX111X device

The MAX111X ADC device was used only by the XScale-based
Zaurus machine types. Now they have all been removed, we can
drop this device model too.

Because this device is an SSI device, in theory it could be created
by users on the command line for boards with a different SSI
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs which
correspond to ADC inputs, or the GPIO output which is an interrupt
line.  The only example a web search produces for "device max1111" or
"device max1110" is our own bug report
  https://gitlab.com/qemu-project/qemu/-/issues/2228
where it's used as an example of a bogus command that causes an
assertion in an aspeed machine type that wasn't expecting anything
other than flash devices on its SMC bus.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-2-peter.maydell@linaro.org

docs/devel/lockcnt: Include kernel-doc API documentation

Pull in the kernel-doc API documentation into the lockcnt docs.
This requires us to fix one rST markup syntax error in the
header file comments.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240816132212.3602106-8-peter.maydell@linaro.org

include: Move QemuLockCnt APIs to their own header

Currently the QemuLockCnt data structure and associated functions are
in the include/qemu/thread.h header.  Move them to their own
qemu/lockcnt.h.  The main reason for doing this is that it means we
can autogenerate the documentation comments into the docs/devel
documentation.

The copyright/author in the new header is drawn from lockcnt.c,
since the header changes were added in the same commit as
lockcnt.c; since neither thread.h nor lockcnt.c state an explicit
license, the standard default of GPL-2-or-later applies.

We include the new header (and the .c file, which was accidentally
omitted previously) in the "RCU" part of MAINTAINERS, since that
is where the lockcnt.rst documentation is categorized.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20240816132212.3602106-7-peter.maydell@linaro.org

docs/devel/rcu: Convert to rST format

Convert docs/devel/rcu.txt to rST format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240816132212.3602106-6-peter.maydell@linaro.org

docs/devel/multiple-iothreads: Convert to rST format

Convert docs/devel/multiple-iothreads.txt to rST format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240816132212.3602106-5-peter.maydell@linaro.org

docs/devel/lockcnt: Convert to rST format

Convert docs/devel/lockcnt.txt to rST format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240816132212.3602106-4-peter.maydell@linaro.org

docs/devel/blkverify: Convert to rST format

Convert blkverify.txt to rST format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240816132212.3602106-3-peter.maydell@linaro.org

docs/devel/blkdebug: Convert to rST format

Convert blkdebug.txt to rST format.  We put it into index-build.rst
because it falls under the "test" part of "QEMU Build and Test
System".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240816132212.3602106-2-peter.maydell@linaro.org

hw/char/pl011: Use correct masks for IBRD and FBRD

In commit b88cfee90268cad we defined masks for the IBRD and FBRD
integer and fractional baud rate divider registers, to prevent the
guest from writing invalid values which could cause division-by-zero.
Unfortunately we got the mask values the wrong way around: the FBRD
register is six bits and the IBRD register is 16 bits, not
vice-versa.

You would only run into this bug if you programmed the UART to a baud
rate of less than 9600, because for 9600 baud and above the IBRD
value will fit into 6 bits, as per the table in
 https://developer.arm.com/documentation/ddi0183/g/programmers-model/register-descriptions/fractional-baud-rate-register--uartfbrd

The only visible effects would be that the value read back from
the register by the guest would be truncated, and we would
print an incorrect baud rate in the debug logs.

Cc: qemu-stable@nongnu.org
Fixes: b88cfee90268 ("hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2610
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20241007144732.2491331-1-peter.maydell@linaro.org

hw/intc/omap_intc: Remove now-unnecessary abstract base class

The OMAP interrupt controller code used to have an omap-intc
class and an omap2-intc class, which shared common code via
the abstract class common-omap-intc. Now we have deleted
omap2-intc, we don't need the separate abstract base class;
fold int into omap-intc.

Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003135323.1653230-1-peter.maydell@linaro.org

hw/arm: Add SPI to Allwinner A10

The Allwinner A10 SPI controller is added to the Allwinner A10
description, so it is available when Cubieboard is emulated.

Update the documentation for Cubieboard to indicate SPI availability.

Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-3-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/ssi: Allwinner A10 SPI emulation

This patch implements Allwinner A10 SPI controller emulation.
Only master-mode functionality is implemented.

Since U-Boot and Linux SPI drivers for Allwinner A10 perform only
byte-wide CPU access (no DMA) to the transmit and receive registers of
the peripheral, the emulated controller does not implement DMA control,
and supports only byte-wide access to transmit and receive registers
(half-word and word accesses will be treated as byte accesses).

Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-2-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/qtest: Check STM32L4x5 clock connections

For USART, GPIO and SYSCFG devices, check that clock frequency before
and after enabling the peripheral clock in RCC is correct.

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003081105.40836-4-ines.varhol@telecom-paris.fr
[PMM: Added missing qtest_quit() call]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/clock: Expose 'qtest-clock-period' QOM property for QTests

Expose the clock period via the QOM 'qtest-clock-period' property so it
can be used in QTests. This property is only accessible in QTests (not
via HMP).

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241003081105.40836-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Create STM32L4x5 SYSCFG clock

This commit creates a clock in STM32L4x5 SYSCFG and wires it up to the
corresponding clock from STM32L4x5 RCC.

Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20241003081105.40836-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3_cpuif: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICC_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: 28cca59c46 ("hw/intc/arm_gicv3: Add NMI handling CPU interface registers")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3: Add cast to match the documentation

The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.

Add an explicit cast to match the documentation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: qemu-stable@nongnu.org
Fixes: d2c0c6aab6 ("hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/stm32f405: Add RCC device to stm32f405 SoC

Add the reset and clock controller device to the stm32f405 SoC.

Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweak commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc/stm32_rcc: Implement RCC device for STM32F4 SoCs

Generic RCC class for STM32 devices.  It can be used for most of
the STM32 chips.  Note that it only implements enable and reset
capabilities.

Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweaked commit message, added MAINTAINERS lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/omap1: Remove unused omap_uwire_attach() method

The recently removed 'cheetah' machine was the single user
of the omap_uwire_attach() method. Remove it altogether with
the uWireSlave structure. Replace the send/receive callbacks
by Unimplemented logging.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'chr-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging

chardev patch queue

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmcOLLEcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5eTaD/0Strje27bLtepVKLQU
# ZbD9X89G8lI2l87j9odwLjWcUEFCTVBhVgSCzrRdllWTlJoc5NVSUPQT9KcuWRpx
# MOjaiR+BO/QnflAKN0GfxCQAnPfYb/29rIe2Xr8co8byVUuE32GPcAy+0xoScOHD
# tpFbZegESsJ8MJN/pmYX83rt82mcNnCxIJxSxm7f4W8+3pdmFPsGQ8Ph+oVnz2n0
# Ag32e9rPUON6yeIZDyyc9Bn+JDxH+DsB8kK5N+KwoKvFIH3Knu725m8skwZvXjl0
# HmscpivJ4JS2N//Y0s891PaBFBzQOjWgv/EtBdW/LQZTcQdjaV4ZF1mUuom/oVPJ
# ydtoJz44dkSC/dOf4J6uwWTk7PNCqlqQfHRuZqosedIAw9MFvBSq5NhfPTut2qKr
# AWPu4r82zM18a/GEjRLPXCnF2APPGa56WhSxn8jGe+FIxcCADDCA9TAzSJLPMHJ8
# 5moXFmPXjYNrT/Wj4jsso73GCCGNPSNcJa+6/avn7SW8SjJGtpj3f7Qj5Aou5i+j
# zsFyzFlAKnGQMBi1Qv4kfd4H87hqGvVahT9+uG/pKfvNQw1VB4dKMWSNs1Utiuim
# sydt2VBwx6B923/6bmZ5HTbO5S9Hfep9jgwemPONNiIi5UeUCv6wTs0f8aallrv0
# idOZFmMK5JNn2NybEgALL1x6lg==
# =+W1p
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Oct 2024 09:49:53 BST
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* tag 'chr-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
  tests/unit/test-char: implement a few mux remove test cases
  chardev/mux: implement detach of frontends from mux
  chardev/mux: switch mux frontends management to bitset
  chardev/mux: introduce `mux_chr_attach_frontend() call
  chardev/mux: convert size members to unsigned int
  chardev/mux: use bool type for `linestart` and `term_got_escape`
  chardev/chardev-internal: remove unused `max_size` struct member
  chardev/char: fix qemu_chr_is_busy() check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/unit/test-char: implement a few mux remove test cases

This patch tests:

1. feasibility of removing mux which does not have frontends attached
   or frontends were prior detached.
2. inability to remove mux which has frontends attached (mux is "busy")

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
[ fixed *error leak ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-9-r.peniaev@gmail.com>

chardev/mux: implement detach of frontends from mux

With bitset management now it becomes feasible to implement
the logic of detaching frontends from multiplexer.

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-8-r.peniaev@gmail.com>

chardev/mux: switch mux frontends management to bitset

Frontends can be attached and detached during run-time (although detach
is not implemented, but will follow). Counter variable of muxes is not
enough for proper attach/detach management, so this patch implements
bitset: if bit is set for the `mux_bitset` variable, then frontend
device can be found in the `backend` array (yes, huge confusion with
backend and frontends names).

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-7-r.peniaev@gmail.com>

chardev/mux: introduce `mux_chr_attach_frontend() call

Move away logic which attaches frontend device to a mux
from `char-fe.c` to actual `char-mux.c` implementation
and make it a separate function.

No logic changes are made.

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-6-r.peniaev@gmail.com>

chardev/mux: convert size members to unsigned int

There is no sense to keep `focus`, `mux_cnt`, `prod`, `cons`
and `tag` variables as signed, those represent either size,
either position in array, which both are unsigned.

`focus` member of `MuxChardev` is kept signed, because initially
set to -1.

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-5-r.peniaev@gmail.com>

chardev/mux: use bool type for `linestart` and `term_got_escape`

Those are boolean variables, not signed integers.

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-4-r.peniaev@gmail.com>

chardev/chardev-internal: remove unused `max_size` struct member

Clean up forgotten leftovers.

Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-3-r.peniaev@gmail.com>

chardev/char: fix qemu_chr_is_busy() check

`mux_cnt` struct member never goes negative or decrements,
so mux chardev can be !busy only when there are no
frontends attached. This patch fixes the always-true
check.

Fixes: a4afa548fc6d ("char: move front end handlers in CharBackend")
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-2-r.peniaev@gmail.com>

Merge tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging

UI-related fixes & shareable 2d memory with -display dbus

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmcNHtIcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5SYTD/9fRNrgnZIvIbIGf0kv
# j3LguzwEsfn8eIUbJEIxtDnoS17zX1t981kP9J9ctUM6wnb0iQNYCXeTrF8Xrq0z
# psiPhHGwPyWMdn9SWRfj597ShPn75z340Qve5GUm7clGu2KILh7TqqACH8LzaX+5
# 6jqoZc3kqD+PYZHnYAi6v1YFfLIYfj0n6EaO/J4RRRZSrknpgct7jpmqL4wVzTIo
# KYlG5afdUUfhmSIv5ZDpuuEJppdG74K2H+hJKDPIOOQ8/i/IU2EQPJ00ppiOPbET
# nA0+piLGtHQwU24u5kDdbDlGL/y1KBKvGclOtzLQxWNStch5A6hqllNsuIg+0dJW
# MRO2WZ8C7P7LD1eGmtYVZF/NzjnlTW/hbM5i0poPqhfcwbVmlIXjDs8GUfMGfINr
# 1MVFGNjxfgadYZ1f6Q/JU/KWPJMR4Ik3C/SmGrRBlfra5YIts0ItDeGgfQIW9JGb
# 1CpOng6/3SvW01B6psrPL+wP+6PsK333KPIA77KafOEMyOyEyuSOUrTShXbyXBHc
# r/nLbWw2lZs4U0kgGRQ21+R3huTyw8LnikYpCnGwTWGCpb9NDFYg7z3CRrZW0hWx
# DIWfN7M6YymeYygPUV9Wjo6i4yq4QqWPp7/QXtkSdX3v44/D7NWytKGST+Hwjkpa
# h6U2vrsLdep2m47bnX/dEEP61g==
# =xdt/
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 14 Oct 2024 14:38:26 BST
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
  audio/pw: Report more accurate error when connecting to PipeWire fails
  tests: add basic -display dbus Map.Unix test
  ui: refactor using a common qemu_pixman_shareable
  virtio-gpu: allocate shareable 2d resources on !win32
  ui/dbus: implement Unix.Map
  ui/dbus: add Listener.Unix.Map interface XML
  ui/dbus: make Listener.Win32.Map win32-specific
  meson: find_program('gdbus-codegen') directly
  ui/surface: allocate shared memory on !win32
  ui/dbus: add trace for can_share_map
  ui/dbus: do not limit to one listener per connection / bus name
  ui/pixman: generalize shared_image_destroy
  util/memfd: report potential errors on free
  ui/dbus: discard pending CursorDefine on new one
  ui/dbus: discard display messages on disable
  ui/dbus: fix filtering all update messages
  ui/win32: fix potential use-after-free with dbus shared memory
  ui/dbus: fix leak on message filtering
  hw/audio/hda: fix memory leak on audio setup
  hw/audio/hda: free timer on exit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests: update lcitool to fix freebsd py311-yaml rename

This addresses the py311-yaml -> py311-pyyaml rename in FreeBSD.

The change to the OpenSUSE dockerfile is something that will allow
QEMU to access rust bindgen in future.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241014130255.10119-1-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

configure, meson: synchronize defaults for configure and Meson Rust options

If the defaults for --enable-rust ($rust in configure) and Meson's rust
option are out of sync, incremental builds will pick Meson's default.

This happens because, on an incremental build, configure does not run
Meson, Make does instead.  Meson then gets the command line options
from either coredata.dat (which has everything cached in Python's pickle
format) or cmd_line.txt (slow path when Meson version is upgraded), but
neither knows about the rust option, and the meson_options.txt default
is used.

This will cause have_rust to be true if rustc is available; and the build
to fail because configure did not put a RUST_TARGET_TRIPLE in config-host.mak.

When in the Rust pull request I changed the $rust default from auto
to disabled, I should have made the same change to meson_options.txt;
do it now.

Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241014110113.173946-1-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

meson: check in main meson.build for native Rust compiler

A working native Rust compiler is always needed in order to compile Rust
code, even when cross compiling, in order to build the procedural macros
that QEMU uses.

Right now, the check is done in rust/qemu-api-macros/meson.build, but this
has two disadvantages.  First, it makes the build fail when the Meson "rust"
option is set to "auto" (instead, Rust support should be disabled).  Second,
add_languages() is one of the few functions that are executed even by
"meson introspect", except that "meson introspect" executes both branches
of "if" statements!  Therefore, "meson introspect" tries to look for a
Rust compiler even if the option is disabled---and then fails because
the compiler is required by rust/qemu-api-macros/meson.build.  This is
visible for example if the compilation host has a stale
scripts/meson-buildoptions.sh and no rustc installed.

Both issues can be fixed by moving the check to the main meson.build,
together with the check for the cross compiler.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

audio/pw: Report more accurate error when connecting to PipeWire fails

According to its man page [1], pw_context_connect() sets errno on
failure:

  Returns a Core on success or NULL with errno set on error.

It may be handy to see errno when figuring out why PipeWire
failed to connect. That leaves us with just one possible path to
reach 'fail_error' label which is then moved to that path and
also its error message is adjusted slightly.

1: https://docs.pipewire.org/group__pw__core.html#ga5994e3a54e4ec718094ca02a1234815b

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <3a78811ad5b0e87816b7616ab21d2eeef00b9c52.1726647033.git.mprivozn@redhat.com>

tests: add basic -display dbus Map.Unix test

Only check we eventually get a shared memory scanout.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-20-marcandre.lureau@redhat.com>

ui: refactor using a common qemu_pixman_shareable

Use a common shareable type for win32 & unix, and helper functions.
This simplify the code as it avoids a lot of #ifdef'ery.

Note: if it helps review, commits could be reordered to introduce the
common type before introducing shareable memory for unix.

Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-19-marcandre.lureau@redhat.com>

virtio-gpu: allocate shareable 2d resources on !win32

Similar to what was done in commit 9462ff46 ("virtio-gpu/win32: allocate
shareable 2d resources/images") for win32, allocate resource memory with
memfd, so the associated display surface memory can be shared with a
different process.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-18-marcandre.lureau@redhat.com>

ui/dbus: implement Unix.Map

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-17-marcandre.lureau@redhat.com>

ui/dbus: add Listener.Unix.Map interface XML

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-16-marcandre.lureau@redhat.com>

ui/dbus: make Listener.Win32.Map win32-specific

There are no types specific to Windows, so the code compiles on other
platforms, but its useless on !Windows.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-15-marcandre.lureau@redhat.com>

meson: find_program('gdbus-codegen') directly

gio.pc variable is a bit bogus in context of cross-compilation, since it
contains an absolute path, relative to the sysroot directory. On Fedora, it ends
up as:
/usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig/usr/bin/gdbus-codegen
path which does not exist because it is not shipped by Fedora mingw
packages.

Instead, we can rely on meson find_program() behaviour to do a better
job based on its search order and capabilities.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-14-marcandre.lureau@redhat.com>

ui/surface: allocate shared memory on !win32

Use qemu_memfd_alloc() to allocate the display surface memory, which
will fallback on tmpfile/mmap() on systems without memfd, and allow to
share the display with other processes.

This is similar to how display memory is allocated on win32 since commit
09b4c198 ("console/win32: allocate shareable display surface").

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-13-marcandre.lureau@redhat.com>

ui/dbus: add trace for can_share_map

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-12-marcandre.lureau@redhat.com>

ui/dbus: do not limit to one listener per connection / bus name

This is an arbitrary limitation that doesn't concern QEMU directly and
may make some use cases unnecessarily more complicated.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-11-marcandre.lureau@redhat.com>

ui/pixman: generalize shared_image_destroy

Learn to free memfd-allocated shared memory.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-10-marcandre.lureau@redhat.com>

util/memfd: report potential errors on free

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-9-marcandre.lureau@redhat.com>

ui/dbus: discard pending CursorDefine on new one

Similar to scanout updates, let's discard pending cursor changes.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-8-marcandre.lureau@redhat.com>

ui/dbus: discard display messages on disable

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-7-marcandre.lureau@redhat.com>

ui/dbus: fix filtering all update messages

Filtering pending messages when a new scanout is given shouldn't discard
pending cursor changes, for example.

Since filtering happens in a different thread, use atomic set/get.

Fixes: fa88b85dea ("ui/dbus: filter out pending messages when scanout")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-6-marcandre.lureau@redhat.com>