git.maquefel.me Git - linux.git/log

Merge tag 'acpi-6.7-rc5' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"Fix a possible crash on an attempt to free unallocated memory in the
  error path of acpi_evaluate_reference() that has been introduced by
  one of the recent changes (Rafael Wysocki)"

* tag 'acpi-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: utils: Fix error path in acpi_evaluate_reference()

Merge tag 'hwmon-for-v6.7-rc5' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

- acpi_power_meter: Fix 4.29 MW output seen if acpi reports bad data

- corsair-psu: Fix ability to probe if the driver is built into the kernel

- ltc2991: Fix spelling mistake "contiuous" -> "continuous"

- max31827: Add missing regulator header file include

- nzxt-kraken2: Fix error handling path in probe function

* tag 'hwmon-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (corsair-psu) Fix probe when built-in
  hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()
  hwmon: (acpi_power_meter) Fix 4.29 MW bug
  hwmon: max31827: include regulator header
  hwmon: ltc2991: Fix spelling mistake "contiuous" -> "continuous"

Merge tag 'pwm/for-6.7-rc5-fixes' of https://git.pengutronix.de/git/ukl/linux

Pull pwm fix from Uwe Kleine-König:
"This fixes a null pointer exception in the bcm2835 pwm driver.

  The problem was introduced by a combination of two commits merged for
  v6.7-rc1 where each change alone would have been fine.

  Thanks to Florian Fainelli for noticing and fixing the issue"

* tag 'pwm/for-6.7-rc5-fixes' of https://git.pengutronix.de/git/ukl/linux:
  pwm: bcm2835: Fix NPD in suspend/resume

Merge tag 'sound-6.7-rc5' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"This is a typical bump in the middle of its way; we've gathered lots
  of fixes (mostly for ASoC) at this time:

   - PCM array out-of-bound access fix

   - Correction of SOC PCM merge error

   - Lots of ASoC SOF Intel updates

   - A few ASoC AMD quirks

   - More proper timer handling in PCM test module

   - HD-audio and USB-audio quirks as usual

   - Other device-specific fixes for various ASoC codecs"

* tag 'sound-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
  ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7
  ALSA: pcmtest: stop timer before buffer is released
  ALSA: hda/realtek: Add Framework laptop 16 to quirks
  ALSA: hda/realtek: add new Framework laptop to quirks
  ALSA: pcm: fix out-of-bounds in snd_pcm_state_names
  ASoC: qcom: sc8280xp: Limit speaker digital volumes
  ASoC: ops: add correct range check for limiting volume
  ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5
  ALSA: hda/realtek: fix speakers on XPS 9530 (2023)
  ALSA: usb-audio: Add Pioneer DJM-450 mixer controls
  ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populate
  ASoC: da7219: Support low DC impedance headset
  ASoC: amd: acp: Add support for a new Huawei Matebook laptop
  ALSA: hda/realtek: Apply quirk for ASUS UM3504DA
  ASoC: SOF: ipc4-topology: Correct data structures for the GAIN module
  ASoC: SOF: ipc4-topology: Correct data structures for the SRC module
  ASoC: hdac_hda: Conditionally register dais for HDMI and Analog
  ASoC: codecs: lpass-tx-macro: set active_decimator correct default value
  ASoC: amd: yc: Fix non-functional mic on ASUS E1504FA
  ASoC: amd: yc: Add DMI entry to support System76 Pangolin 13
  ...

Merge tag 'drm-fixes-2023-12-08' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and i915 as usual. A couple of
  nouveau, panfrost, one core and one bridge Kconfig.

  Seems about normal for rc5.

  atomic-helpers:
   - invoke end_fb_access while owning plane state

  i915:
   - fix a missing dep for a previous fix
   - Relax BXT/GLK DSI transcoder hblank limits
   - Fix DP MST .mode_valid_ctx() return values
   - Reject DP MST modes that require bigjoiner (as it's not yet
     supported on DP MST)
   - Fix _intel_dsb_commit() variable type to allow negative values

  nouveau:
   - document some bits of gsp rm
   - flush vmm more on tu102 to avoid hangs

  panfrost:
   - fix imported dma-buf objects residency
   - fix device freq update

  bridge:
   - tc358768 - fix Kconfig

  amdgpu:
   - Disable MCBP on gfx9
   - DC vbios fix
   - eDP fix
   - dml2 UBSAN fix
   - SMU 14 fix
   - RAS fixes
   - dml KASAN/KCSAN fix
   - PSP 13 fix
   - Clockgating fixes
   - Suspend fix

  exynos:
   - fix pointer dereference
   - fix wrong error check"

* tag 'drm-fixes-2023-12-08' of git://anongit.freedesktop.org/drm/drm: (27 commits)
  drm/exynos: fix a wrong error checking
  drm/exynos: fix a potential error pointer dereference
  drm/amdgpu: fix buffer funcs setting order on suspend
  drm/amdgpu: Avoid querying DRM MGCG status
  drm/amdgpu: Update HDP 4.4.2 clock gating flags
  drm/amdgpu: Add NULL checks for function pointers
  drm/amdgpu: Restrict extended wait to PSP v13.0.6
  drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml
  drm/amdgpu: optimize the printing order of error data
  drm/amdgpu: Update fw version for boot time error query
  drm/amd/pm: support new mca smu error code decoding
  drm/amd/swsmu: update smu v14_0_0 driver if version and metrics table
  drm/amd/display: Fix array-index-out-of-bounds in dml2
  drm/amd/display: Add monitor patch for specific eDP
  drm/amd/display: Use channel_width = 2 for vram table 3.0
  drm/amdgpu: disable MCBP by default
  drm/atomic-helpers: Invoke end_fb_access while owning plane state
  drm/i915: correct the input parameter on _intel_dsb_commit()
  drm/i915/mst: Reject modes that require the bigjoiner
  drm/i915/mst: Fix .mode_valid_ctx() return values
  ...

hwmon: (corsair-psu) Fix probe when built-in

It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
but the tester did not provide a Tested-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Merge tag 'riscv-for-linus-6.7-rc5' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A pair of fixes to the new module load-time relocation code

- A fix for hwprobe overflowing on rv32

- A fix for to correctly decode C.SWSP and C.SDSP, which manifests in
   misaligned access handling

- A fix for a boot-time shadow call stack initialization ordering issue

- A fix for Andes' errata probing, which was calling
   riscv_noncoherent_supported() too late in the boot process and
   triggering an oops

* tag 'riscv-for-linus-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: errata: andes: Probe for IOCP only once in boot stage
  riscv: Fix SMP when shadow call stacks are enabled
  dt-bindings: perf: riscv,pmu: drop unneeded quotes
  riscv: fix misaligned access handling of C.SWSP and C.SDSP
  RISC-V: hwprobe: Always use u64 for extension bits
  Support rv32 ULEB128 test
  riscv: Correct type casting in module loading
  riscv: Safely remove entries from relocation list

Merge tag 'soc-fixes-6.7-1' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
  Arm machines as well as Microchip RISC-V, and most of these address
  build-time warnings for spec violations and other minor issues. One of
  the Mediatek warnings was enabled by default and prevented a clean
  build.

  The ones that address serious runtime issues are all on the i.MX
  platform:

   - a boot time panic on imx8qm

   - USB hanging under load on imx8

   - regressions on the imx93 ethernet phy

  Code fixes include a minor error handling for the i.MX PMU driver, and
  a number of firmware driver fixes:

   - OP-TEE fix for supplicant based device enumeration, and a new sysfs
     attribute to needed to fix a race against userspace

   - Arm SCMI fix for possible truncation/overflow in the frequency
     computations

   - Multiple FF-A fixes for the newly added notification support"

* tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits)
  MAINTAINERS: change the S32G2 maintainer's email address.
  arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
  ARM: dts: imx28-xea: Pass the 'model' property
  ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
  MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8-apalis: set wifi regulator to always-on
  ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
  arm64: dts: imx8ulp: update gpio node name to align with register address
  arm64: dts: imx93: update gpio node name to align with register address
  arm64: dts: imx93: correct mediamix power
  arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
  arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
  arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
  dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
  ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
  arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
  arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
  arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
  firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
  firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
  ...

Merge tag 'trace-v6.7-rc4' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Snapshot buffer issues:

   1. When instances started allowing latency tracers, it uses a
      snapshot buffer (another buffer that is not written to but swapped
      with the main buffer that is). The snapshot buffer needs to be the
      same size as the main buffer. But when the snapshot buffers were
      added to instances, the code to make the snapshot equal to the
      main buffer still was only doing it for the main buffer and not
      the instances.

   2. Need to stop the current tracer when resizing the buffers.
      Otherwise there can be a race if the tracer decides to make a
      snapshot between resizing the main buffer and the snapshot buffer.

   3. When a tracer is "stopped" in disables both the main buffer and
      the snapshot buffer. This needs to be done for instances and not
      only the main buffer, now that instances also have a snapshot
      buffer.

- Buffered event for filtering issues:

   When filtering is enabled, because events can be dropped often, it is
   quicker to copy the event into a temp buffer and write that into the
   main buffer if it is not filtered or just drop the event if it is,
   than to write the event into the ring buffer and then try to discard
   it. This temp buffer is allocated and needs special synchronization
   to do so. But there were some issues with that:

   1. When disabling the filter and freeing the buffer, a call to all
      CPUs is required to stop each per_cpu usage. But the code called
      smp_call_function_many() which does not include the current CPU.
      If the task is migrated to another CPU when it enables the CPUs
      via smp_call_function_many(), it will not enable the one it is
      currently on and this causes issues later on. Use
      on_each_cpu_mask() instead, which includes the current CPU.

    2.When the allocation of the buffered event fails, it can give a
      warning. But the buffered event is just an optimization (it's
      still OK to write to the ring buffer and free it). Do not WARN in
      this case.

    3.The freeing of the buffer event requires synchronization. First a
      counter is decremented to zero so that no new uses of it will
      happen. Then it sets the buffered event to NULL, and finally it
      frees the buffered event. There's a synchronize_rcu() between the
      counter decrement and the setting the variable to NULL, but only a
      smp_wmb() between that and the freeing of the buffer. It is
      theoretically possible that a user missed seeing the decrement,
      but will use the buffer after it is free. Another
      synchronize_rcu() is needed in place of that smp_wmb().

- ring buffer timestamps on 32 bit machines

   The ring buffer timestamp on 32 bit machines has to break the 64 bit
   number into multiple values as cmpxchg is required on it, and a 64
   bit cmpxchg on 32 bit architectures is very slow. The code use to
   just use two 32 bit values and make it a 60 bit timestamp where the
   other 4 bits were used as counters for synchronization. It later came
   known that the timestamp on 32 bit still need all 64 bits in some
   cases. So 3 words were created to handle the 64 bits. But issues
   arised with this:

    1. The synchronization logic still only compared the counter with
       the first two, but not with the third number, so the
       synchronization could fail unknowingly.

    2. A check on discard of an event could race if an event happened
       between the discard and updating one of the counters. The counter
       needs to be updated (forcing an absolute timestamp and not to use
       a delta) before the actual discard happens.

* tag 'trace-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Test last update in 32bit version of __rb_time_read()
  ring-buffer: Force absolute timestamp on discard of event
  tracing: Fix a possible race when disabling buffered events
  tracing: Fix a warning when allocating buffered events fails
  tracing: Fix incomplete locking when disabling buffered events
  tracing: Disable snapshot buffer when stopping instance tracers
  tracing: Stop current tracer when resizing buffer
  tracing: Always update snapshot buffer size

Merge tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
  cc:stable. The remainder address post-6.6 issues or aren't considered
  serious enough to justify backporting"

* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
  mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
  nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
  mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
  scripts/gdb: fix lx-device-list-bus and lx-device-list-class
  MAINTAINERS: drop Antti Palosaari
  highmem: fix a memory copy problem in memcpy_from_folio
  nilfs2: fix missing error check for sb_set_blocksize call
  kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
  units: add missing header
  drivers/base/cpu: crash data showing should depends on KEXEC_CORE
  mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
  scripts/gdb/tasks: fix lx-ps command error
  mm/Kconfig: make userfaultfd a menuconfig
  selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
  mm/damon/core: copy nr_accesses when splitting region
  lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
  checkstack: fix printed address
  mm/memory_hotplug: fix error handling in add_memory_resource()
  mm/memory_hotplug: add missing mem_hotplug_lock
  .mailmap: add a new address mapping for Chester Lin
  ...

Merge tag 'v6.7-rockchip-dtsfixes1' of git://git./linux/kernel/git/mmind/linux-rockchip into arm/fixes

Devicetree fixes for the 6.7-cycle.

All over the place this time. From adapting the size of the vdec nodes
on rk3328 and rk3399, fixing some wrong pinctrl settings on rk3128 and
the Turing RK1 board, emmc-settings fixes on rk3588 and interrupt-name
mishaps, down to some dt-cleanups.

Also this adds the missing rockchip,rk3588-pmugrf compatible to the soc
grf binding, that I somehow messed up during the pull requests for the
-rc1 . At least with it included the dt-checker is happier.

* tag 'v6.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
  arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
  arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
  arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls
  ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128
  arm64: dts: rockchip: minor whitespace cleanup around '='
  ARM: dts: rockchip: minor whitespace cleanup around '='
  dt-bindings: soc: rockchip: grf: add rockchip,rk3588-pmugrf
  arm64: dts: rockchip: fix rk356x pcie msg interrupt name
  arm64: dts: rockchip: Expand reg size of vdec node for RK3399
  arm64: dts: rockchip: Expand reg size of vdec node for RK3328

Link: https://lore.kernel.org/r/2709704.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'exynos-drm-next-for-v6.7-rc5' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes

Two fixups
- Fix a potential error pointer dereference by checking the return value
  of exynos_drm_crtc_get_by_type() function before accessing to crtc
  object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
  by Dan[1]

[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207042223.2473706-1-inki.dae@samsung.com

Merge tag 'amd-drm-fixes-6.7-2023-12-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.7-2023-12-06:

amdgpu:
- Disable MCBP on gfx9
- DC vbios fix
- eDP fix
- dml2 UBSAN fix
- SMU 14 fix
- RAS fixes
- dml KASAN/KCSAN fix
- PSP 13 fix
- Clockgating fixes
- Suspend fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206221102.4995-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2023-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v6.7-rc5:
- Document nouveau's GSP-RM.
- Flush vmm harder on nouveau tu102.
- Panfrost fix for imported dma-buf objects, and device frequency.
- Kconfig Build fix for tc358768.
- Call end_fb_access after atomic commit.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/05a26dc0-8cf1-4b1f-abb6-3bf471fbfc99@linux.intel.com

Merge tag 'net-6.7-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.

  Current release - regressions:

   - veth: fix packet segmentation in veth_convert_skb_to_xdp_buff

  Current release - new code bugs:

   - tcp: assorted fixes to the new Auth Option support

  Older releases - regressions:

   - tcp: fix mid stream window clamp

   - tls: fix incorrect splice handling

   - ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()

   - dsa: mv88e6xxx: restore USXGMII support for 6393X

   - arcnet: restore support for multiple Sohard Arcnet cards

  Older releases - always broken:

   - tcp: do not accept ACK of bytes we never sent

   - require admin privileges to receive packet traces via netlink

   - packet: move reference count in packet_sock to atomic_long_t

   - bpf:
      - fix incorrect branch offset comparison with cpu=v4
      - fix prog_array_map_poke_run map poke update

   - netfilter:
      - three fixes for crashes on bad admin commands
      - xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
      - nf_tables: fix 'exist' matching on bigendian arches

   - leds: netdev: fix RTNL handling to prevent potential deadlock

   - eth: tg3: prevent races in error/reset handling

   - eth: r8169: fix rtl8125b PAUSE storm when suspended

   - eth: r8152: improve reset and surprise removal handling

   - eth: hns: fix race between changing features and sending

   - eth: nfp: fix sleep in atomic for bonding offload"

* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
  net/smc: fix missing byte order conversion in CLC handshake
  net: dsa: microchip: provide a list of valid protocols for xmit handler
  drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
  psample: Require 'CAP_NET_ADMIN' when joining "packets" group
  bpf: sockmap, updating the sg structure should also update curr
  net: tls, update curr on splice as well
  nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
  net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
  tcp: do not accept ACK of bytes we never sent
  selftests/bpf: Add test for early update in prog_array_map_poke_run
  bpf: Fix prog_array_map_poke_run map poke update
  netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
  netfilter: nf_tables: validate family when identifying table via handle
  netfilter: nf_tables: bail out on mismatching dynset and set expressions
  netfilter: nf_tables: fix 'exist' matching on bigendian arches
  netfilter: nft_set_pipapo: skip inactive elements during set walk
  netfilter: bpf: fix bad registration on nf_defrag
  leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
  octeontx2-af: Update Tx link register range
  ...

Merge tag 'drm-intel-fixes-2023-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.7-rc5:
- d21a3962d304 ("drm/i915: Call intel_pre_plane_updates() also for pipes
getting enabled") in the previous fixes pull depends on a change that
wasn't included. Pick it up.
- Relax BXT/GLK DSI transcoder hblank limits
- Fix DP MST .mode_valid_ctx() return values
- Reject DP MST modes that require bigjoiner (as it's not yet supported on DP MST)
- Fix _intel_dsb_commit() variable type to allow negative values

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87msum1hv8.fsf@intel.com

Merge tag 'cgroup-for-6.7-rc4-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
"Just one fix.

  Commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
  changed how freezing state is recorded which made cgroup_freezing()
  disagree with the actual state of the task while thawing triggering a
  warning. Fix it by updating cgroup_freezing()"

* tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup_freezer: cgroup_freezing: Check if not frozen

ACPI: utils: Fix error path in acpi_evaluate_reference()

If a pointer to an uninitialized struct acpi_handle_list is passed to
acpi_evaluate_reference() and it decides to bail out early, either
because acpi_evaluate_object() fails, or because it produces invalid
data, the handles pointer from the struct acpi_handle_list will be
passed to kfree() and if it is not NULL, the kernel will crash on an
attempt to free unallocated memory.

Address this by moving the "end" label in acpi_evaluate_reference() to
the end of the function, which is sufficient, because no cleanup is
needed in that case.

Fixes: 2e57d10a6591 ("ACPI: utils: Dynamically determine acpi_handle_list size")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>

Merge tag 'wq-for-6.7-rc4-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fix from Tejun Heo:
"Just one patch to fix a bug which can crash the kernel if the
  housekeeping and wq_unbound_cpu cpumask configuration combination
  leaves the latter empty"

* tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Make sure that wq_unbound_cpumask is never empty

Merge tag 'regmap-fix-v6.7-rc4' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
"An incremental fix for the fix introduced during the merge window for
  caching of the selector for windowed register ranges. We were
  incorrectly leaking an error code in the case where the last selector
  accessed was for some reason not cached"

* tag 'regmap-fix-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: fix bogus error on regcache_sync success

Merge tag 'devicetree-fixes-for-6.7-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

- Fix dt-extract-compatibles for builds with in tree build directory

- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email

- Fix the of_reconfig_get_state_change() return value documentation

- Add missing #power-domain-cells property to QCom MPM

- Fix warnings in i.MX LCDIF and adi,adv7533

* tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: adi,adv75xx: Document #sound-dai-cells
  dt-bindings: lcdif: Properly describe the i.MX23 interrupts
  dt-bindings: interrupt-controller: Allow #power-domain-cells
  of: dynamic: Fix of_reconfig_get_state_change() return value documentation
  dt-bindings: display: mediatek: dsi: remove Xinlei's mail
  dt: dt-extract-compatibles: Don't follow symlinks when walking tree

Merge tag 'platform-drivers-x86-v6.7-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

- Fix i8042 filter resource handling, input, and suspend issues in
   asus-wmi

- Skip zero instance WMI blocks to avoid issues with some laptops

- Differentiate dev/production keys in mlxbf-bootctl

- Correct surface serdev related return value to avoid leaking errno
   into userspace

- Error checking fixes

* tag 'platform-drivers-x86-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/mellanox: Check devm_hwmon_device_register_with_groups() return value
  platform/mellanox: Add null pointer checks for devm_kasprintf()
  mlxbf-bootctl: correctly identify secure boot with development keys
  platform/x86: wmi: Skip blocks with zero instances
  platform/surface: aggregator: fix recv_buf() return value
  platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspend
  platform/x86: asus-wmi: Filter Volume key presses if also reported via atkbd
  platform/x86: asus-wmi: Change q500a_i8042_filter() into a generic i8042-filter
  platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code

Merge tag 'x86-int80-20231207' of git://git./linux/kernel/git/tip/tip

Pull x86 int80 fixes from Dave Hansen:
"Avoid VMM misuse of 'int 0x80' handling in TDX and SEV guests.

  It also has the very nice side effect of getting rid of a bunch of
  assembly entry code"

* tag 'x86-int80-20231207' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tdx: Allow 32-bit emulation by default
  x86/entry: Do not allow external 0x80 interrupts
  x86/entry: Convert INT 0x80 emulation to IDTENTRY
  x86/coco: Disable 32-bit emulation by default on TDX and SEV

ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7

Lenovo Yoga Pro 7 14APH8 (PCI SSID 17aa:3882) seems requiring the
similar workaround like Yoga 9 model for the bass speaker.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAGGk=CRRQ1L9p771HsXTN_ebZP41Qj+3gw35Gezurn+nokRewg@mail.gmail.com
Link: https://lore.kernel.org/r/20231207182035.30248-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning

After backporting commit 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY
flag support") in CentOS Stream 9, CI reported the following error:

    In file included from ./include/linux/kernel.h:17,
                     from ./include/linux/list.h:9,
                     from ./include/linux/preempt.h:11,
                     from ./include/linux/spinlock.h:56,
                     from net/vmw_vsock/virtio_transport_common.c:9:
    net/vmw_vsock/virtio_transport_common.c: In function ‘virtio_transport_can_zcopy‘:
    ./include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
       20 |         (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
          |                                   ^~
    ./include/linux/minmax.h:26:18: note: in expansion of macro ‘__typecheck‘
       26 |                 (__typecheck(x, y) && __no_side_effects(x, y))
          |                  ^~~~~~~~~~~
    ./include/linux/minmax.h:36:31: note: in expansion of macro ‘__safe_cmp‘
       36 |         __builtin_choose_expr(__safe_cmp(x, y), \
          |                               ^~~~~~~~~~
    ./include/linux/minmax.h:45:25: note: in expansion of macro ‘__careful_cmp‘
       45 | #define min(x, y)       __careful_cmp(x, y, <)
          |                         ^~~~~~~~~~~~~
    net/vmw_vsock/virtio_transport_common.c:63:37: note: in expansion of macro ‘min‘
       63 |                 int pages_to_send = min(pages_in_iov, MAX_SKB_FRAGS);

We could solve it by using min_t(), but this operation seems entirely
unnecessary, because we also pass MAX_SKB_FRAGS to iov_iter_npages(),
which performs almost the same check, returning at most MAX_SKB_FRAGS
elements. So, let's eliminate this unnecessary comparison.

Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Cc: avkrasnov@salutedevices.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Link: https://lore.kernel.org/r/20231206164143.281107-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: fix missing byte order conversion in CLC handshake

The byte order conversions of ISM GID and DMB token are missing in
process of CLC accept and confirm. So fix it.

Fixes: 3d9725a6a133 ("net/smc: common routine for CLC accept and confirm")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/1701882157-87956-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: microchip: provide a list of valid protocols for xmit handler

Provide a list of valid protocols for which the driver will provide
it's deferred xmit handler.

When using DSA_TAG_PROTO_KSZ8795 protocol, it does not provide a
"connect" method, therefor ksz_connect() is not allocating ksz_tagger_data.

This avoids the following null pointer dereference:
ksz_connect_tag_protocol from dsa_register_switch+0x9ac/0xee0
dsa_register_switch from ksz_switch_register+0x65c/0x828
ksz_switch_register from ksz_spi_probe+0x11c/0x168
ksz_spi_probe from spi_probe+0x84/0xa8
spi_probe from really_probe+0xc8/0x2d8

Fixes: ab32f56a4100 ("net: dsa: microchip: ptp: add packet transmission timestamping")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231206071655.1626479-1-sean@geanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'generic-netlink-multicast-fixes'

Ido Schimmel says:

====================
Generic netlink multicast fixes

Restrict two generic netlink multicast groups - in the "psample" and
"NET_DM" families - to be root-only with the appropriate capabilities.
See individual patches for more details.
====================

Link: https://lore.kernel.org/r/20231206213102.1824398-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group

The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.

Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.

A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.

Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.

Tested using [1].

Before:

# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo

After:

# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group

[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>

int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;

sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}

err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}

grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}

err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}

return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c

Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

psample: Require 'CAP_NET_ADMIN' when joining "packets" group

The "psample" generic netlink family notifies sampled packets over the
"packets" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by marking the group with the 'GENL_UNS_ADMIN_PERM' flag. This will
prevent non-root users or root without the 'CAP_NET_ADMIN' capability
(in the user namespace owning the network namespace) from joining the
group.

Tested using [1].

Before:

# capsh -- -c ./psample_repo
# capsh --drop=cap_net_admin -- -c ./psample_repo

After:

# capsh -- -c ./psample_repo
# capsh --drop=cap_net_admin -- -c ./psample_repo
Failed to join "packets" multicast group

[1]
$ cat psample.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>

int join_grp(struct nl_sock *sk, const char *grp_name)
{
int grp, err;

grp = genl_ctrl_resolve_grp(sk, "psample", grp_name);
if (grp < 0) {
fprintf(stderr, "Failed to resolve \"%s\" multicast group\n",
grp_name);
return grp;
}

err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"%s\" multicast group\n",
grp_name);
return err;
}

return 0;
}

int main(int argc, char **argv)
{
struct nl_sock *sk;
int err;

sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}

err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}

err = join_grp(sk, "config");
if (err)
return err;

err = join_grp(sk, "packets");
if (err)
return err;

return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o psample_repo psample.c

Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fixes-for-ktls'

John Fastabend says:

====================
Couple fixes for TLS and BPF interactions.
====================

Link: https://lore.kernel.org/r/20231206232706.374377-1-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf: sockmap, updating the sg structure should also update curr

Curr pointer should be updated when the sg structure is shifted.

Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: tls, update curr on splice as well

The curr pointer must also be updated on the splice similar to how
we do this for other copy types.

Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231206232706.374377-2-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

x86/tdx: Allow 32-bit emulation by default

32-bit emulation was disabled on TDX to prevent a possible attack by
a VMM injecting an interrupt on vector 0x80.

Now that int80_emulation() has a check for external interrupts the
limitation can be lifted.

To distinguish software interrupts from external ones, int80_emulation()
checks the APIC ISR bit relevant to the 0x80 vector. For
software interrupts, this bit will be 0.

On TDX, the VAPIC state (including ISR) is protected and cannot be
manipulated by the VMM. The ISR bit is set by the microcode flow during
the handling of posted interrupts.

[ dhansen: more changelog tweaks ]

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+

x86/entry: Do not allow external 0x80 interrupts

The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
also triggers the same codepath.

An external interrupt on vector 0x80 will currently be interpreted as a
32-bit system call, and assuming that it was a user context.

Panic on external interrupts on the vector.

To distinguish software interrupts from external ones, the kernel checks
the APIC ISR bit relevant to the 0x80 vector. For software interrupts,
this bit will be 0.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+

x86/entry: Convert INT 0x80 emulation to IDTENTRY

There is no real reason to have a separate ASM entry point implementation
for the legacy INT 0x80 syscall emulation on 64-bit.

IDTENTRY provides all the functionality needed with the only difference
that it does not:

- save the syscall number (AX) into pt_regs::orig_ax
- set pt_regs::ax to -ENOSYS

Both can be done safely in the C code of an IDTENTRY before invoking any of
the syscall related functions which depend on this convention.

Aside of ASM code reduction this prepares for detecting and handling a
local APIC injected vector 0x80.

[ kirill.shutemov: More verbose comments ]
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+

x86/coco: Disable 32-bit emulation by default on TDX and SEV

The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
triggers the same handler.

The kernel interprets an external interrupt on vector 0x80 as a 32-bit
system call that came from userspace.

A VMM can inject external interrupts on any arbitrary vector at any
time. This remains true even for TDX and SEV guests where the VMM is
untrusted.

Put together, this allows an untrusted VMM to trigger int80 syscall
handling at any given point. The content of the guest register file at
that moment defines what syscall is triggered and its arguments. It
opens the guest OS to manipulation from the VMM side.

Disable 32-bit emulation by default for TDX and SEV. User can override
it with the ia32_emulation=y command line option.

[ dhansen: reword the changelog ]

Reported-by: Supraja Sridhara <supraja.sridhara@inf.ethz.ch>
Reported-by: Benedict Schlüter <benedict.schlueter@inf.ethz.ch>
Reported-by: Mark Kuhne <mark.kuhne@inf.ethz.ch>
Reported-by: Andrin Bertschi <andrin.bertschi@inf.ethz.ch>
Reported-by: Shweta Shinde <shweta.shinde@inf.ethz.ch>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+: 1da5c9b x86: Introduce ia32_enabled()
Cc: <stable@vger.kernel.org> # v6.0+

Merge tag 'nf-23-12-06' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Incorrect nf_defrag registration for bpf link infra, from D. Wythe.

2) Skip inactive elements in pipapo set backend walk to avoid double
   deactivation, from Florian Westphal.

3) Fix NFT_*_F_PRESENT check with big endian arch, also from Florian.

4) Bail out if number of expressions in NFTA_DYNSET_EXPRESSIONS mismatch
   stateful expressions in set declaration.

5) Honor family in table lookup by handle. Broken since 4.16.

6) Use sk_callback_lock to protect access to sk->sk_socket in xt_owner.
   sock_orphan() might zap this pointer, from Phil Sutter.

All of these fixes address broken stuff for several releases.

* tag 'nf-23-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
  netfilter: nf_tables: validate family when identifying table via handle
  netfilter: nf_tables: bail out on mismatching dynset and set expressions
  netfilter: nf_tables: fix 'exist' matching on bigendian arches
  netfilter: nft_set_pipapo: skip inactive elements during set walk
  netfilter: bpf: fix bad registration on nf_defrag
====================

Link: https://lore.kernel.org/r/20231206180357.959930-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-12-06

We've added 4 non-merge commits during the last 6 day(s) which contain
a total of 7 files changed, 185 insertions(+), 55 deletions(-).

The main changes are:

1) Fix race found by syzkaller on prog_array_map_poke_run when
   a BPF program's kallsym symbols were still missing, from Jiri Olsa.

2) Fix BPF verifier's branch offset comparison for BPF_JMP32 | BPF_JA,
   from Yonghong Song.

3) Fix xsk's poll handling to only set mask on bound xsk sockets,
   from Yewon Choi.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add test for early update in prog_array_map_poke_run
  bpf: Fix prog_array_map_poke_run map poke update
  xsk: Skip polling event check for unbound socket
  bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4
====================

Link: https://lore.kernel.org/r/20231206220528.12093-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'imx-fixes-6.7' of git://git./linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.7:

- A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX
  entry.
- A series from Alexander Stein to fix #pwm-cells for imx8-ss.
- A series from Haibo Chen to fix GPIO node name for i.MX93 and
  i.MX8ULP.
- Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix
  an issue that the controller may hang when processing transactions
  under heavy USB traffic from multiple endpoints.
- Fix mediamix block power on/off for i.MX93 by correcting the power
  domain clock to be 'nic_media'.
- A couple of Ethernet PHY clock regression fixes for imx6ul-pico and
  imx6q-skov board.
- Fix edma3 power domain for i.MX8QM to fix a panic during startup
  process.

* tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx28-xea: Pass the 'model' property
  ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
  MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8-apalis: set wifi regulator to always-on
  ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
  arm64: dts: imx8ulp: update gpio node name to align with register address
  arm64: dts: imx93: update gpio node name to align with register address
  arm64: dts: imx93: correct mediamix power
  arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
  arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
  arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
  dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
  ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
  arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
  ARM: dts: imx6q: skov: fix ethernet clock regression
  arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config

Link: https://lore.kernel.org/r/20231207005202.GF270430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

nfp: flower: fix for take a mutex lock in soft irq context and rcu lock

The neighbour event callback call the function nfp_tun_write_neigh,
this function will take a mutex lock and it is in soft irq context,
change the work queue to process the neighbour event.

Move the nfp_tun_write_neigh function out of range rcu_read_lock/unlock()
in function nfp_tunnel_request_route_v4 and nfp_tunnel_request_route_v6.

Fixes: abc210952af7 ("nfp: flower: tunnel neigh support bond offload")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ALSA: pcmtest: stop timer before buffer is released

Stop timer in the 'trigger' and 'sync_stop' callbacks since we want
the timer to be stopped before the DMA buffer is released. Otherwise,
it could trigger a kernel panic in some circumstances, for instance
when the DMA buffer is already released but the timer callback is
still running.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20231206223211.12761-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'parisc-for-6.7-rc5' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:
"A single line patch for parisc which fixes the build in tinyconfig
  configurations:

   - Fix asm operand number out of range build error in bug table"

* tag 'parisc-for-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix asm operand number out of range build error in bug table

ALSA: hda/realtek: Add Framework laptop 16 to quirks

The Framework 16" laptop has the same controller as other Framework
models. Apply the presence detection quirk.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206193927.2996-1-mario.limonciello@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-05 (ice, i40e, iavf)

This series contains updates to ice, i40e and iavf drivers.

Michal fixes incorrect usage of VF MSIX value and index calculation for
ice.

Marcin restores disabling of Rx VLAN filtering which was inadvertently
removed for ice.

Ivan Vecera corrects improper messaging of MFS port for i40e.

Jake fixes incorrect checking of coalesce values on iavf.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero
  i40e: Fix unexpected MFS warning message
  ice: Restore fix disabling RX VLAN filtering
  ice: change vfs.num_msix_per to vf->num_msix
====================

Link: https://lore.kernel.org/r/20231205211918.2123019-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: Restore USXGMII support for 6393X

In 4a56212774ac, USXGMII support was added for 6393X, but this was
lost in the PCS conversion (the blamed commit), most likely because
these efforts where more or less done in parallel.

Restore this feature by porting Michal's patch to fit the new
implementation.

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Michal Smulski <michal.smulski@ooma.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: e5b732a275f5 ("net: dsa: mv88e6xxx: convert 88e639x to phylink_pcs")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Link: https://lore.kernel.org/r/20231205221359.3926018-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: do not accept ACK of bytes we never sent

This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.

ACK seq validation is currently following RFC 5961 5.2 guidelines:

   The ACK value is considered acceptable only if
   it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
   SND.NXT).  All incoming segments whose ACK value doesn't satisfy the
   above condition MUST be discarded and an ACK sent back.  It needs to
   be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
   duplicate (SEG.ACK < SND.UNA), it can be ignored.  If the ACK
   acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
   ACK, drop the segment, and return".  The "ignored" above implies that
   the processing of the incoming data segment continues, which means
   the ACK value is treated as acceptable.  This mitigation makes the
   ACK check more stringent since any ACK < SND.UNA wouldn't be
   accepted, instead only ACKs that are in the range ((SND.UNA -
   MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.

This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.

This greatly improves TCP security at a little cost.

I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.

tp->bytes_acked was added in linux-4.2

Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:

0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0

// ---------------- Handshake ------------------- //

// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.

+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4

// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997

// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535

// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001

Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yepeng Pan <yepeng.pan@cispa.de>
Reported-by: Christian Rossow <rossow@cispa.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/exynos: fix a wrong error checking

Fix a wrong error checking in exynos_drm_dma.c module.

In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.

However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.

This issue[1] was reported by Dan.

Changelog v1:
- fix build warning.

[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/

Reported-by : Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix a potential error pointer dereference

Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()

The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.

Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()

I conducted real-time testing and observed that
madvise_cold_or_pageout_pte_range() causes significant latency under
memory pressure, which can be effectively reduced by adding cond_resched()
within the loop.

I tested on the LicheePi 4A board using Cylictest for latency testing and
Ftrace for latency tracing.  The board uses TH1520 processor and has a
memory size of 8GB.  The kernel version is 6.5.0 with the PREEMPT_RT patch
applied.

The script I tested is as follows:

echo wakeup_rt > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/tracing_on
echo 0 > /sys/kernel/tracing/tracing_max_latency
stress-ng --vm 8 --vm-bytes 2G &
cyclictest --mlockall --smp --priority=99 --distance=0 --duration=30m
echo 0 > /sys/kernel/tracing/tracing_on
cat /sys/kernel/tracing/trace

The tracing results before modification are as follows:

# tracer: wakeup_rt
#
# wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00003-g999d221864bf
# --------------------------------------------------------------------
# latency: 2552 us, #6/6, CPU#3 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4)
#    -----------------
#    | task: cyclictest-196 (uid:0 nice:0 policy:1 rt_prio:99)
#    -----------------
#
#                    _--------=> CPU#
#                   / _-------=> irqs-off/BH-disabled
#                  | / _------=> need-resched
#                  || / _-----=> need-resched-lazy
#                  ||| / _----=> hardirq/softirq
#                  |||| / _---=> preempt-depth
#                  ||||| / _--=> preempt-lazy-depth
#                  |||||| / _-=> migrate-disable
#                  ||||||| /     delay
#  cmd     pid     |||||||| time  |   caller
#     \   /        ||||||||  \    |    /
stress-n-206       3dn.h512    2us :      206:120:R   + [003]     196:  0:R cyclictest
stress-n-206       3dn.h512    7us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup
=> ttwu_do_activate
=> try_to_wake_up
=> wake_up_process
=> hrtimer_wakeup
=> __hrtimer_run_queues
=> hrtimer_interrupt
=> riscv_timer_interrupt
=> handle_percpu_devid_irq
=> generic_handle_domain_irq
=> riscv_intc_irq
=> handle_riscv_irq
=> do_irq
stress-n-206       3dn.h512    9us#: 0
stress-n-206       3d...3.. 2544us : __schedule
stress-n-206       3d...3.. 2545us :      206:120:R ==> [003]     196:  0:R cyclictest
stress-n-206       3d...3.. 2551us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup_sched_switch
=> __schedule
=> preempt_schedule
=> migrate_enable
=> rt_spin_unlock
=> madvise_cold_or_pageout_pte_range
=> walk_pgd_range
=> __walk_page_range
=> walk_page_range
=> madvise_pageout
=> madvise_vma_behavior
=> do_madvise
=> sys_madvise
=> do_trap_ecall_u
=> ret_from_exception

The tracing results after modification are as follows:

# tracer: wakeup_rt
#
# wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00004-gca3876fc69a6-dirty
# --------------------------------------------------------------------
# latency: 1689 us, #6/6, CPU#0 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4)
#    -----------------
#    | task: cyclictest-217 (uid:0 nice:0 policy:1 rt_prio:99)
#    -----------------
#
#                    _--------=> CPU#
#                   / _-------=> irqs-off/BH-disabled
#                  | / _------=> need-resched
#                  || / _-----=> need-resched-lazy
#                  ||| / _----=> hardirq/softirq
#                  |||| / _---=> preempt-depth
#                  ||||| / _--=> preempt-lazy-depth
#                  |||||| / _-=> migrate-disable
#                  ||||||| /     delay
#  cmd     pid     |||||||| time  |   caller
#     \   /        ||||||||  \    |    /
stress-n-232       0dn.h413    1us+:      232:120:R   + [000]     217:  0:R cyclictest
stress-n-232       0dn.h413   12us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup
=> ttwu_do_activate
=> try_to_wake_up
=> wake_up_process
=> hrtimer_wakeup
=> __hrtimer_run_queues
=> hrtimer_interrupt
=> riscv_timer_interrupt
=> handle_percpu_devid_irq
=> generic_handle_domain_irq
=> riscv_intc_irq
=> handle_riscv_irq
=> do_irq
stress-n-232       0dn.h413   19us#: 0
stress-n-232       0d...3.. 1671us : __schedule
stress-n-232       0d...3.. 1676us+:      232:120:R ==> [000]     217:  0:R cyclictest
stress-n-232       0d...3.. 1687us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup_sched_switch
=> __schedule
=> preempt_schedule
=> migrate_enable
=> free_unref_page_list
=> release_pages
=> free_pages_and_swap_cache
=> tlb_batch_pages_flush
=> tlb_flush_mmu
=> unmap_page_range
=> unmap_vmas
=> unmap_region
=> do_vmi_align_munmap.constprop.0
=> do_vmi_munmap
=> __vm_munmap
=> sys_munmap
=> do_trap_ecall_u
=> ret_from_exception

After the modification, the cause of maximum latency is no longer
madvise_cold_or_pageout_pte_range(), so this modification can reduce the
latency caused by madvise_cold_or_pageout_pte_range().

Currently the madvise_cold_or_pageout_pte_range() function exhibits
significant latency under memory pressure, which can be effectively
reduced by adding cond_resched() within the loop.

When the batch_count reaches SWAP_CLUSTER_MAX, we reschedule
the task to ensure fairness and avoid long lock holding times.

Link: https://lkml.kernel.org/r/85363861af65fac66c7a98c251906afc0d9c8098.1695291046.git.wangjiexun@tinylab.org
Signed-off-by: Jiexun Wang <wangjiexun@tinylab.org>
Cc: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()

If nilfs2 reads a disk image with corrupted segment usage metadata, and
its segment usage information is marked as an error for the segment at the
write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs
during log writing.

Segments newly allocated for writing with nilfs_sufile_alloc() will not
have this error flag set, but this unexpected situation will occur if the
segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active
segment) was marked in error.

Fix this issue by inserting a sanity check to treat it as a file system
corruption.

Since error returns are not allowed during the execution phase where
nilfs_sufile_set_segment_usage() is used, this inserts the sanity check
into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the
segment usage record to be updated and sets it up in a dirty state for
writing.

In addition, nilfs_sufile_set_segment_usage() is also called when
canceling log writing and undoing segment usage update, so in order to
avoid issuing the same kernel warning in that case, in case of
cancellation, avoid checking the error flag in
nilfs_sufile_set_segment_usage().

Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14e9f834f6ddecece094
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI

After commit a08c7193e4f1 "mm/filemap: remove hugetlb special casing in
filemap.c", hugetlb pages are stored in the page cache in base page sized
indexes.  This leads to multi index stores in the xarray which is only
supporting through CONFIG_XARRAY_MULTI.  The other page cache user of
multi index stores ,THP, selects XARRAY_MULTI.  Have CONFIG_HUGETLB_PAGE
follow this behavior as well to avoid the BUG() with a CONFIG_HUGETLB_PAGE
&& !CONFIG_XARRAY_MULTI config.

Link: https://lkml.kernel.org/r/20231204183234.348697-1-sidhartha.kumar@oracle.com
Fixes: a08c7193e4f1 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

scripts/gdb: fix lx-device-list-bus and lx-device-list-class

After the conversion to bus_to_subsys() and class_to_subsys(), the gdb
scripts listing the system buses and classes respectively was broken, fix
those by returning the subsys_priv pointer and have the various caller
de-reference either the 'bus' or 'class' structure members accordingly.

Link: https://lkml.kernel.org/r/20231130043317.174188-1-florian.fainelli@broadcom.com
Fixes: 7b884b7f24b4 ("driver core: class.c: convert to only use class_to_subsys")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: drop Antti Palosaari

He is currently inactive (last message from him is two years ago [1]).
His media tree [2] is also dormant (latest activity is 6 years ago), yet
his site is still online [3].

Drop him from MAINTAINERS and add CREDITS entry for him. We thank him
for maintaining various DVB drivers.

[1]: https://lore.kernel.org/all/660772b3-0597-02db-ed94-c6a9be04e8e8@iki.fi/
[2]: https://git.linuxtv.org/anttip/media_tree.git/
[3]: https://palosaari.fi/linux/

Link: https://lkml.kernel.org/r/20231130083848.5396-1-bagasdotme@gmail.com
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

highmem: fix a memory copy problem in memcpy_from_folio

Clang static checker complains that value stored to 'from' is never read.
And memcpy_from_folio() only copy the last chunk memory from folio to
destination. Use 'to += chunk' to replace 'from += chunk' to fix this
typo problem.

Link: https://lkml.kernel.org/r/20231130034017.1210429-1-suhui@nfschina.com
Fixes: b23d03ef7af5 ("highmem: add memcpy_to_folio() and memcpy_from_folio()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix missing error check for sb_set_blocksize call

When mounting a filesystem image with a block size larger than the page
size, nilfs2 repeatedly outputs long error messages with stack traces to
the kernel log, such as the following:

getblk(): invalid block size 8192 requested
logical block size: 512
...
Call Trace:
  dump_stack_lvl+0x92/0xd4
  dump_stack+0xd/0x10
  bdev_getblk+0x33a/0x354
  __breadahead+0x11/0x80
  nilfs_search_super_root+0xe2/0x704 [nilfs2]
  load_nilfs+0x72/0x504 [nilfs2]
  nilfs_mount+0x30f/0x518 [nilfs2]
  legacy_get_tree+0x1b/0x40
  vfs_get_tree+0x18/0xc4
  path_mount+0x786/0xa88
  __ia32_sys_mount+0x147/0x1a8
  __do_fast_syscall_32+0x56/0xc8
  do_fast_syscall_32+0x29/0x58
  do_SYSENTER_32+0x15/0x18
  entry_SYSENTER_32+0x98/0xf1
...

This overloads the system logger.  And to make matters worse, it sometimes
crashes the kernel with a memory access violation.

This is because the return value of the sb_set_blocksize() call, which
should be checked for errors, is not checked.

The latter issue is due to out-of-buffer memory being accessed based on a
large block size that caused sb_set_blocksize() to fail for buffers read
with the initial minimum block size that remained unupdated in the
super_block structure.

Since nilfs2 mkfs tool does not accept block sizes larger than the system
page size, this has been overlooked.  However, it is possible to create
this situation by intentionally modifying the tool or by passing a
filesystem image created on a system with a large page size to a system
with a smaller page size and mounting it.

Fix this issue by inserting the expected error handling for the call to
sb_set_blocksize().

Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP

Ignat Korchagin complained that a potential config regression was
introduced by commit 89cde455915f ("kexec: consolidate kexec and crash
options into kernel/Kconfig.kexec").  Before the commit, CONFIG_CRASH_DUMP
has no dependency on CONFIG_KEXEC.  After the commit, CRASH_DUMP selects
KEXEC.  That enforces system to have CONFIG_KEXEC=y as long as
CONFIG_CRASH_DUMP=Y which people may not want.

In Ignat's case, he sets CONFIG_CRASH_DUMP=y, CONFIG_KEXEC_FILE=y and
CONFIG_KEXEC=n because kexec_load interface could have security issue if
kernel/initrd has no chance to be signed and verified.

CRASH_DUMP has select of KEXEC because Eric, author of above commit, met a
LKP report of build failure when posting patch of earlier version.  Please
see below link to get detail of the LKP report:

    https://lore.kernel.org/all/3e8eecd1-a277-2cfb-690e-5de2eb7b988e@oracle.com/T/#u

In fact, that LKP report is triggered because arm's <asm/kexec.h> is
wrapped in CONFIG_KEXEC ifdeffery scope.  That is wrong.  CONFIG_KEXEC
controls the enabling/disabling of kexec_load interface, but not kexec
feature.  Removing the wrongly added CONFIG_KEXEC ifdeffery scope in
<asm/kexec.h> of arm allows us to drop the select KEXEC for CRASH_DUMP.
Meanwhile, change arch/arm/kernel/Makefile to let machine_kexec.o
relocate_kernel.o depend on KEXEC_CORE.

Link: https://lkml.kernel.org/r/20231128054457.659452-1-bhe@redhat.com
Fixes: 89cde455915f ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

units: add missing header

BITS_PER_BYTE is defined in bits.h.

Link: https://lkml.kernel.org/r/20231128174404.393393-1-andriy.shevchenko@linux.intel.com
Fixes: e8eed5f7366f ("units: Add BYTES_PER_*BIT")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Damian Muszynski <damian.muszynski@intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drivers/base/cpu: crash data showing should depends on KEXEC_CORE

After commit 88a6f8994421 ("crash: memory and CPU hotplug sysfs
attributes"), on x86_64, if only below kernel configs related to kdump are
set, compiling error are triggered.

----
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
------

------------------------------------------------------
drivers/base/cpu.c: In function `crash_hotplug_show':
drivers/base/cpu.c:309:40: error: implicit declaration of function `crash_hotplug_cpu_support'; did you mean `crash_hotplug_show'? [-Werror=implicit-function-declaration]
  309 |         return sysfs_emit(buf, "%d\n", crash_hotplug_cpu_support());
      |                                        ^~~~~~~~~~~~~~~~~~~~~~~~~
      |                                        crash_hotplug_show
cc1: some warnings being treated as errors
------------------------------------------------------

CONFIG_KEXEC is used to enable kexec_load interface, the
crash_notes/crash_notes_size/crash_hotplug showing depends on
CONFIG_KEXEC is incorrect. It should depend on KEXEC_CORE instead.

Fix it now.

Link: https://lkml.kernel.org/r/20231128055248.659808-1-bhe@redhat.com
Fixes: 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions

If a scheme is set to not applied to any monitoring target region for any
reasons including the target access pattern, quota, filters, or
watermarks, writing 'update_schemes_tried_regions' to 'state' DAMON sysfs
file can indefinitely hang. Fix the case by implementing a timeout for
the operation. The time limit is two apply intervals of each scheme.

Link: https://lkml.kernel.org/r/20231124213840.39157-1-sj@kernel.org
Fixes: 4d4e41b68299 ("mm/damon/sysfs-schemes: do not update tried regions more than one DAMON snapshot")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

scripts/gdb/tasks: fix lx-ps command error

Since commit 8e1f385104ac ("kill task_struct->thread_group") remove
the thread_group, we will encounter below issue.

(gdb) lx-ps
TASK PID COMM
0xffff800086503340 0 swapper/0
Python Exception <class 'gdb.error'>: There is no member named thread_group.
Error occurred in Python: There is no member named thread_group.

We use signal->thread_head to iterate all threads instead.

[Kuan-Ying.Lee@mediatek.com: v2]
Link: https://lkml.kernel.org/r/20231129065142.13375-2-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20231127070404.4192-2-Kuan-Ying.Lee@mediatek.com
Fixes: 8e1f385104ac ("kill task_struct->thread_group")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/Kconfig: make userfaultfd a menuconfig

PTE_MARKER_UFFD_WP is a subconfig for userfaultfd. To make it clear,
switch to use menuconfig for userfaultfd.

Link: https://lkml.kernel.org/r/20231123224204.1060152-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS

Commit 05f1edac8009 ("selftests/mm: run all tests from run_vmtests.sh")
fixed the inconsistency caused by tests being defined as TEST_GEN_PROGS.
This issue was leading to tests not being executed via run_vmtests.sh and
furthermore some tests running twice due to the kselftests wrapper also
executing them.

Fix the definition of two tests (soft-dirty and pagemap_ioctl) that are
still incorrectly defined.

Link: https://lkml.kernel.org/r/20231120222908.28559-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/core: copy nr_accesses when splitting region

Regions split function ('damon_split_region_at()') is called at the
beginning of an aggregation interval, and when DAMOS applying the actions
and charging quota. Because 'nr_accesses' fields of all regions are reset
at the beginning of each aggregation interval, and DAMOS was applying the
action at the end of each aggregation interval, there was no need to copy
the 'nr_accesses' field to the split-out region.

However, commit 42f994b71404 ("mm/damon/core: implement scheme-specific
apply interval") made DAMOS applies action on its own timing interval.
Hence, 'nr_accesses' should also copied to split-out regions, but the
commit didn't. Fix it by copying it.

Link: https://lkml.kernel.org/r/20231119171529.66863-1-sj@kernel.org
Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly

group_cpus_evenly() could be part of storage driver's error handler, such
as nvme driver, when may happen during CPU hotplug, in which storage queue
has to drain its pending IOs because all CPUs associated with the queue
are offline and the queue is becoming inactive.  And handling IO needs
error handler to provide forward progress.

Then deadlock is caused:

1) inside CPU hotplug handler, CPU hotplug lock is held, and blk-mq's
   handler is waiting for inflight IO

2) error handler is waiting for CPU hotplug lock

3) inflight IO can't be completed in blk-mq's CPU hotplug handler
   because error handling can't provide forward progress.

Solve the deadlock by not holding CPU hotplug lock in group_cpus_evenly(),
in which two stage spreads are taken: 1) the 1st stage is over all present
CPUs; 2) the end stage is over all other CPUs.

Turns out the two stage spread just needs consistent 'cpu_present_mask',
and remove the CPU hotplug lock by storing it into one local cache.  This
way doesn't change correctness, because all CPUs are still covered.

Link: https://lkml.kernel.org/r/20231120083559.285174-1-ming.lei@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

checkstack: fix printed address

All addresses printed by checkstack have an extra incorrect 0 appended at
the end.

This was introduced with commit 677f1410e058 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:

0000000000100a30 <do_one_initcall>:
...
100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15)

So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.

Fix this by using the proper regex, and simplify the code a bit.

Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com
Fixes: 677f1410e058 ("scripts/checkstack.pl: don't display $dre as different entity")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory_hotplug: fix error handling in add_memory_resource()

In add_memory_resource(), creation of memory block devices occurs after
successful call to arch_add_memory().  However, creation of memory block
devices could fail.  In that case, arch_remove_memory() is called to
perform necessary cleanup.

Currently with or without altmap support, arch_remove_memory() is always
passed with altmap set to NULL during error handling.  This leads to
freeing of struct pages using free_pages(), eventhough the allocation
might have been performed with altmap support via
altmap_alloc_block_buf().

Fix the error handling by passing altmap in arch_remove_memory(). This
ensures the following:
* When altmap is disabled, deallocation of the struct pages array occurs
  via free_pages().
* When altmap is enabled, deallocation occurs via vmem_altmap_free().

Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory_hotplug: add missing mem_hotplug_lock

From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).

mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.

When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0:      | CPU 1:
memory_offline()      |
-> offline_pages()      |
-> mem_hotplug_begin()      |
   ...      |
-> mem_hotplug_done()      |
     | kmemleak_scan()
     | -> get_online_mems()
     |    ...
-> mhp_deinit_memmap_on_memory()      |
  [not protected by mem_hotplug_begin/done()]|
  Marks memory section as offline,      |   Retrieves zone_start_pfn
  poisons vmemmap struct pages and updates   |   and struct page members.
  the zone related data      |
         |    ...
         | -> put_online_mems()

Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory().  Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.

online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.

Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

.mailmap: add a new address mapping for Chester Lin

My company email address is going to be disabled so let's create a mapping
that links to my private/community email just in case people might still
try to reach me via the old one.

Link: https://lkml.kernel.org/r/20231117022807.29461-1-clin@suse.com
Signed-off-by: Chester Lin <clin@suse.com>
Cc: Chester Lin <chester62515@gmail.com>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: fix oops when filemap_map_pmd() without prealloc_pte

syzbot reports oops in lockdep's __lock_acquire(), called from
__pte_offset_map_lock() called from filemap_map_pages(); or when I run the
repro, the oops comes in pmd_install(), called from filemap_map_pmd()
called from filemap_map_pages(), just before the __pte_offset_map_lock().

The problem is that filemap_map_pmd() has been assuming that when it finds
pmd_none(), a page table has already been prepared in prealloc_pte; and
indeed do_fault_around() has been careful to preallocate one there, when
it finds pmd_none(): but what if *pmd became none in between?

My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it
easy for *pmd to be cleared while servicing a page fault; but even before
those, a huge *pmd might be zapped while a fault is serviced.

The difference in symptomatic stack traces comes from the "memory model"
in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some
models that is strict, and will oops on the NULL prealloc_pte; in other
models, it will construct a bogus value to be populated into *pmd, then
__pte_offset_map_lock() oops when trying to access split ptlock pointer
(or some other symptom in normal case of ptlock embedded not pointer).

Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/
Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com
Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>,
Cc: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

squashfs: squashfs_read_data need to check if the length is 0

When the length passed in is 0, the pagemap_scan_test_walk() caller should
bail. This error causes at least a WARN_ON().

Link: https://lkml.kernel.org/r/20231116031352.40853-1-lizhi.xu@windriver.com
Reported-by: syzbot+32d3767580a1ea339a81@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000000526f2060a30a085@google.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/selftests: fix pagemap_ioctl memory map test

__FILE__ is not guaranteed to exist in current dir. Replace that with
argv[0] for memory map test.

Link: https://lkml.kernel.org/r/20231116201547.536857-4-peterx@redhat.com
Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/pagemap: fix wr-protect even if PM_SCAN_WP_MATCHING not set

The new pagemap ioctl contains a fast path for wr-protections without
looking into category masks. It forgets to check PM_SCAN_WP_MATCHING
before applying the wr-protections. It can cause, e.g., pte markers
installed on archs that do not even support uffd wr-protect.

WARNING: CPU: 0 PID: 5059 at mm/memory.c:1520 zap_pte_range mm/memory.c:1520 [inline]

Link: https://lkml.kernel.org/r/20231116201547.536857-3-peterx@redhat.com
Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+7ca4b2719dc742b8d0a4@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/pagemap: fix ioctl(PAGEMAP_SCAN) on vma check

Patch series "mm/pagemap: A few fixes to the recent PAGEMAP_SCAN".

This series should fix two known reports from syzbot on the new
PAGEMAP_SCAN ioctl():

https://lore.kernel.org/all/000000000000b0e576060a30ee3b@google.com/
https://lore.kernel.org/all/000000000000773fa7060a31e2cc@google.com/

The 3rd patch is something I found when testing these patches.

This patch (of 3):

The new ioctl(PAGEMAP_SCAN) relies on vma wr-protect capability provided
by userfault, however in the vma test it didn't explicitly require the vma
to have wr-protect function enabled, even if PM_SCAN_WP_MATCHING flag is
set.

It means the pagemap code can now apply uffd-wp bit to a page in the vma
even if not registered to userfaultfd at all.

Then in whatever way as long as the pte got written and page fault
resolved, we'll apply the write bit even if uffd-wp bit is set. We'll see
a pte that has both UFFD_WP and WRITE bit set. Anything later that looks
up the pte for uffd-wp bit will trigger the warning:

WARNING: CPU: 1 PID: 5071 at arch/x86/include/asm/pgtable.h:403 pte_uffd_wp arch/x86/include/asm/pgtable.h:403 [inline]

Fix it by doing proper check over the vma attributes when
PM_SCAN_WP_MATCHING is specified.

Link: https://lkml.kernel.org/r/20231116201547.536857-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20231116201547.536857-2-peterx@redhat.com
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+e94c5aaf7890901ebf9b@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: kmem: properly initialize local objcg variable in current_obj_cgroup()

Erhard reported that the 6.7-rc1 kernel panics on boot if being
built with clang-16. The problem was not reproducible with gcc.

[    5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI
[    5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf]
[    5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 #77
[    5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[    5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5
[    5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3
[    5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02
[    5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08
[    5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa
[    5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000
[    5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18
[    5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba
[    5.977860] FS:  00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000
[    5.977860] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0
[    5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    5.977860] Call Trace:
[    5.977860]  <TASK>
[    5.977860]  ? __die_body+0x16/0x75
[    5.977860]  ? die_addr+0x4a/0x70
[    5.977860]  ? exc_general_protection+0x1c9/0x2d0
[    5.977860]  ? cgroup_mkdir+0x455/0x9fb
[    5.977860]  ? __x64_sys_mkdir+0x69/0x80
[    5.977860]  ? asm_exc_general_protection+0x26/0x30
[    5.977860]  ? obj_cgroup_charge_pages+0x27/0x2d5
[    5.977860]  obj_cgroup_charge+0x114/0x1ab
[    5.977860]  pcpu_alloc+0x1a6/0xa65
[    5.977860]  ? mem_cgroup_css_alloc+0x1eb/0x1140
[    5.977860]  ? cgroup_apply_control_enable+0x26b/0x7c0
[    5.977860]  mem_cgroup_css_alloc+0x23f/0x1140
[    5.977860]  cgroup_apply_control_enable+0x26b/0x7c0
[    5.977860]  ? cgroup_kn_set_ugid+0x2d/0x1a0
[    5.977860]  cgroup_mkdir+0x455/0x9fb
[    5.977860]  ? __cfi_cgroup_mkdir+0x10/0x10
[    5.977860]  kernfs_iop_mkdir+0x130/0x170
[    5.977860]  vfs_mkdir+0x405/0x530
[    5.977860]  do_mkdirat+0x188/0x1f0
[    5.977860]  __x64_sys_mkdir+0x69/0x80
[    5.977860]  do_syscall_64+0x7d/0x100
[    5.977860]  ? do_syscall_64+0x89/0x100
[    5.977860]  ? do_syscall_64+0x89/0x100
[    5.977860]  ? do_syscall_64+0x89/0x100
[    5.977860]  ? do_syscall_64+0x89/0x100
[    5.977860]  entry_SYSCALL_64_after_hwframe+0x4b/0x53
[    5.977860] RIP: 0033:0x7f297671defb
[    5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88
[    5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053
[    5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb
[    5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0
[    5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000
[    5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80
[    5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0
[    5.977860]  </TASK>
[    5.977860] Modules linked in:
[    6.014095] ---[ end trace 0000000000000000 ]---
[    6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5
[    6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3
[    6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02
[    6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08
[    6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa
[    6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000
[    6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18
[    6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba
[    6.022609] FS:  00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000
[    6.023593] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0
[    6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Actually the problem is caused by uninitialized local variable in
current_obj_cgroup().  If the root memory cgroup is set as an active
memory cgroup for a charging scope (as in the trace, where systemd tries
to create the first non-root cgroup, so the parent cgroup is the root
cgroup), the "for" loop is skipped and uninitialized objcg is returned,
causing a panic down the accounting stack.

The fix is trivial: initialize the objcg variable to NULL unconditionally
before the "for" loop.

[vbabka@suse.cz: remove redundant assignment]
Link: https://lkml.kernel.org/r/4bd106d5-c3e3-6731-9a74-cff81e2392de@suse.cz
Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev
Fixes: e86828e5446d ("mm: kmem: scoped objcg protection")
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1959
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/kmemleak: move set_track_prepare() outside raw_spinlocks

set_track_prepare() will call __alloc_pages() which attempts to acquire
zone->lock(spinlocks), so move it outside object->lock(raw_spinlocks)
because it's not right to acquire spinlocks while holding raw_spinlocks in
RT mode.

Link: https://lkml.kernel.org/r/20231115082138.2649870-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Revert "mm/kmemleak: move the initialisation of object to __link_object"

Patch series "Fix invalid wait context of set_track_prepare()".

Geert reported an invalid wait context[1] which is resulted by moving
set_track_prepare() inside kmemleak_lock.  This is not allowed because in
RT mode, the spinlocks can be preempted but raw_spinlocks can not, so it
is not allowd to acquire spinlocks while holding raw_spinlocks.  The
second patch fix same problem in kmemleak_update_trace().

This patch (of 2):

Move the initialisation of object back to__alloc_object() because
set_track_prepare() attempt to acquire zone->lock(spinlocks) while
__link_object is holding kmemleak_lock(raw_spinlocks).  This is not right
for RT mode.

This reverts commit 245245c2fffd00 ("mm/kmemleak: move the initialisation
of object to __link_object").

Link: https://lkml.kernel.org/r/20231115082138.2649870-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20231115082138.2649870-2-liushixin2@huawei.com
Fixes: 245245c2fffd ("mm/kmemleak: move the initialisation of object to __link_object")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/linux-mm/CAMuHMdWj0UzwNaxUvcocTfh481qRJpOWwXxsJCTJfu1oCqvgdA@mail.gmail.com/ [1]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory.c:zap_pte_range() print bad swap entry

We have a report of this WARN() triggering. Let's print the offending
swp_entry_t to help diagnosis.

Link: https://lkml.kernel.org/r/000000000000b0e576060a30ee3b@google.com
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

hugetlb: fix null-ptr-deref in hugetlb_vma_lock_write

The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping.  A pointer to the reserve map
is in vma->vm_private_data.  __vma_private_lock was checking the pointer
for NULL.  However, it is possible that the low bits of the pointer could
be used as flags.  In such instances, vm_private_data is not NULL and not
a valid pointer.  This results in the null-ptr-deref reported by syzbot:

general protection fault, probably for non-canonical address 0xdffffc000000001d:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5753 [inline]
lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
down_write+0x93/0x200 kernel/locking/rwsem.c:1573
hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
__hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
unmap_vmas+0x2f4/0x470 mm/memory.c:1733
exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
__mmput+0x12a/0x4d0 kernel/fork.c:1349
mmput+0x62/0x70 kernel/fork.c:1371
exit_mm kernel/exit.c:567 [inline]
do_exit+0x9ad/0x2a20 kernel/exit.c:861
__do_sys_exit kernel/exit.c:991 [inline]
__se_sys_exit kernel/exit.c:989 [inline]
__x64_sys_exit+0x42/0x50 kernel/exit.c:989
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Mask off low bit flags before checking for NULL pointer.  In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.

Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/
Fixes: bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: add Andrew Morton for lib/*

Add myself as the fallthough maintainer for material under lib/.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dt-bindings: display: adi,adv75xx: Document #sound-dai-cells

When using audio from ADV7533 or ADV7535 and describing the audio
card via simple-audio-card, the '#sound-dai-cells' needs to be passed.

Document the '#sound-dai-cells' property to fix the following
dt-schema warning:

imx8mn-beacon-kit.dtb: hdmi@3d: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20231206093643.2198562-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: lcdif: Properly describe the i.MX23 interrupts

i.MX23 has two LCDIF interrupts instead of a single one like other
i.MX devices.

Take this into account for properly describing the i.MX23 LCDIF
interrupts.

This fixes the following dt-schema warning:

imx23-olinuxino.dtb: lcdif@80030000: interrupts: [[46], [45]] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231206112337.2234849-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>

selftests/bpf: Add test for early update in prog_array_map_poke_run

Adding test that tries to trigger the BUG_IN during early map update
in prog_array_map_poke_run function.

The idea is to share prog array map between thread that constantly
updates it and another one loading a program that uses that prog
array.

Eventually we will hit a place where the program is ok to be updated
(poke->tailcall_target_stable check) but the address is still not
registered in kallsyms, so the bpf_arch_text_poke returns -EINVAL
and cause imbalance for the next tail call update check, which will
fail with -EBUSY in bpf_arch_text_poke as described in previous fix.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-3-jolsa@kernel.org

bpf: Fix prog_array_map_poke_run map poke update

Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.

There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.

The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.

I'm hitting following race during the program load:

  CPU 0                             CPU 1

  bpf_prog_load
    bpf_check
      do_misc_fixups
        prog_array_map_poke_track

                                    map_update_elem
                                      bpf_fd_array_map_update_elem
                                        prog_array_map_poke_run

                                          bpf_arch_text_poke returns -EINVAL

    bpf_prog_kallsyms_add

After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.

Similar race exists on the program unload.

Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.

Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.

  [0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810

Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Lee Jones <lee@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org

drm/amdgpu: fix buffer funcs setting order on suspend

We need to disable this after the last eviction
call, but before we disable the SDMA IP.

Fixes: b70438004a14 ("drm/amdgpu: move buffer funcs setting up a level")
Link: https://lore.kernel.org/r/87edgv4x3i.fsf@vps.thesusis.net
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Tested-by: Phillip Susi <phill@thesusis.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Phillip Susi <phill@thesusis.net>
Cc: Luben Tuikov <ltuikov89@gmail.com>

drm/amdgpu: Avoid querying DRM MGCG status

MP0 v13.0.6 SOCs don't support DRM MGCG.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update HDP 4.4.2 clock gating flags

HDP 4.4.2 clockgating is enabled by default, update the flags
accordingly.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add NULL checks for function pointers

Check if function is implemented before making the call.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Restrict extended wait to PSP v13.0.6

Only PSPv13.0.6 SOCs take a longer time to reach steady state. Other
PSPv13 based SOCs don't need extended wait. Also, reduce PSPv13.0.6 wait
time.

Cc: stable@vger.kernel.org
Fixes: fc5988907156 ("drm/amdgpu: update retry times for psp vmbx wait")
Fixes: d8c1925ba8cd ("drm/amdgpu: update retry times for psp BL wait")
Link: https://lore.kernel.org/amd-gfx/34dd4c66-f7bf-44aa-af8f-c82889dd652c@amd.com/
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml

Does the same thing as:
commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2")

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302107.hUDXVyWT-lkp@intel.com/
Fixes: 67e38874b85b ("drm/amd/display: Increase num voltage states to 40")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Samson Tam <samson.tam@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>

drm/amdgpu: optimize the printing order of error data

sort error data list to optimize the printing order.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update fw version for boot time error query

Boot time error query is not available until fw a10109

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: support new mca smu error code decoding

support new mca smu error code decoding from smu 85.86.0 for smu v13.0.6

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/swsmu: update smu v14_0_0 driver if version and metrics table

Increment the driver if version and add new mems to the mertics table.

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix array-index-out-of-bounds in dml2

[Why]
UBSAN errors observed in dmesg.
array-index-out-of-bounds in dml2/display_mode_core.c

[How]
Fix the index.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add monitor patch for specific eDP

[WHY]
Some eDP panels's ext caps don't write initial value cause the value of
dpcd_addr(0x317) is random. It means that sometimes the eDP will
clarify it is OLED, miniLED...etc cause the backlight control interface
is incorrect.

[HOW]
Add a new panel patch to remove sink ext caps(HDR,OLED...etc)

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use channel_width = 2 for vram table 3.0

VBIOS has suggested to use channel_width=2 for any ASIC that uses vram
info 3.0. This is because channel_width in the vram table no longer
represents the memory width

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable MCBP by default

Disable MCBP(mid command buffer preemption) by default as old Mesa
hangs with it. We shall not enable the feature that breaks old usermode
driver.

Fixes: 50a7c8765ca6 ("drm/amdgpu: enable mcbp by default on gfx9")
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

ring-buffer: Test last update in 32bit version of __rb_time_read()

Since 64 bit cmpxchg() is very expensive on 32bit architectures, the
timestamp used by the ring buffer does some interesting tricks to be able
to still have an atomic 64 bit number. It originally just used 60 bits and
broke it up into two 32 bit words where the extra 2 bits were used for
synchronization. But this was not enough for all use cases, and all 64
bits were required.

The 32bit version of the ring buffer timestamp was then broken up into 3
32bit words using the same counter trick. But one update was not done. The
check to see if the read operation was done without interruption only
checked the first two words and not last one (like it had before this
update). Fix it by making sure all three updates happen without
interruption by comparing the initial counter with the last updated
counter.

Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ring-buffer: Force absolute timestamp on discard of event

There's a race where if an event is discarded from the ring buffer and an
interrupt were to happen at that time and insert an event, the time stamp
is still used from the discarded event as an offset. This can screw up the
timings.

If the event is going to be discarded, set the "before_stamp" to zero.
When a new event comes in, it compares the "before_stamp" with the
"write_stamp" and if they are not equal, it will insert an absolute
timestamp. This will prevent the timings from getting out of sync due to
the discarded event.

Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 6f6be606e763f ("ring-buffer: Force before_stamp and write_stamp to be different on discard")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>