Merge tag 'pull-riscv-to-apply-20211220-1' of github.com:alistair23/qemu into staging

First RISC-V PR for QEMU 7.0

 - Add support for ratified 1.0 Vector extension
 - Drop support for draft 0.7.1 Vector extension
 - Support Zfhmin and Zfh extensions
 - Improve kernel loading for non-Linux platforms

# gpg: Signature made Sun 19 Dec 2021 08:56:08 PM PST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* tag 'pull-riscv-to-apply-20211220-1' of github.com:alistair23/qemu: (88 commits)
  hw/riscv: Use load address rather than entry point for fw_dynamic next_addr
  target/riscv: Enable bitmanip Zb[abcs] instructions
  riscv: Set 5.4 as minimum kernel version for riscv32
  target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing instructions
  target/riscv: rvv-1.0: update opivv_vadc_check() comment
  target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm
  target/riscv: rvv-1.0: add vector unit-stride mask load/store insns
  target/riscv: rvv-1.0: add evl parameter to vext_ldst_us()
  target/riscv: rvv-1.0: add vsetivli instruction
  target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11
  target/riscv: rvv-1.0: floating-point reciprocal estimate instruction
  target/riscv: rvv-1.0: floating-point reciprocal square-root estimate instruction
  target/riscv: gdb: support vector registers for rv64 & rv32
  target/riscv: rvv-1.0: trigger illegal instruction exception if frm is not valid
  target/riscv: rvv-1.0: implement vstart CSR
  target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits
  target/riscv: rvv-1.0: narrowing floating-point/integer type-convert
  target/riscv: add "set round to odd" rounding mode helper function
  target/riscv: rvv-1.0: widening floating-point/integer type-convert
  target/riscv: rvv-1.0: floating-point/integer type-convert instructions
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/riscv: Use load address rather than entry point for fw_dynamic next_addr

The original BBL boot method had the kernel embedded as an opaque blob
that was blindly jumped to, which OpenSBI implemented as fw_payload.
OpenSBI then implemented fw_jump, which allows the payload to be loaded
elsewhere, but still blindly jumps to a fixed address at which the
kernel is to be loaded. Finally, OpenSBI introduced fw_dynamic, which
allows the previous stage to inform it where to jump to, rather than
having to blindly guess like fw_jump, or embed the payload as part of
the build like fw_payload. When used with an opaque binary (i.e. the
output of objcopy -O binary), it matches the behaviour of the previous
methods. However, when used with an ELF, QEMU currently passes on the
ELF's entry point address, which causes a discrepancy compared with all
the other boot methods if that entry point is not the first instruction
in the binary.

This difference specific to fw_dynamic with an ELF is not apparent when
booting Linux, since its entry point is the first instruction in the
binary. However, FreeBSD has a separate ELF entry point, following the
calling convention used by its bootloader, that differs from the first
instruction in the binary, used for the legacy SBI entry point, and so
the specific combination of QEMU's default fw_dynamic firmware with
booting FreeBSD as an ELF rather than a raw binary does not work.

Thus, align the behaviour when loading an ELF with the behaviour when
loading a raw binary; namely, use the base address of the loaded kernel
in place of the entry point.

The uImage code is left as-is in using the U-Boot header's entry point,
since the calling convention for that entry point is the same as the SBI
one and it mirrors what U-Boot will do.

Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211214032456.70203-1-jrtc27@jrtc27.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Enable bitmanip Zb[abcs] instructions

The bitmanip extension has now been ratified [1] and upstream tooling
(gcc/binutils) support it too, so move them out of experimental and also
enable by default (for better test exposure/coverage)

[1] https://wiki.riscv.org/display/TECH/Recently+Ratified+Extensions

Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211216051844.3921088-1-vineetg@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

riscv: Set 5.4 as minimum kernel version for riscv32

5.4 is first stable API as far as rv32 is concerned see [1]

[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=7a55dd3fb6d2c307a002a16776be84310b9c8989

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Message-Id: <20211216073111.2890607-1-raj.khem@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing instructions

SEW has the limitation which cannot exceed ELEN.

Widening instructions have a destination group with EEW = 2*SEW
and narrowing instructions have a source operand with EEW = 2*SEW.
Both of the instructions have the limitation of: 2*SEW <= ELEN.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-78-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: update opivv_vadc_check() comment

Vector Integer Add-with-Carry / Subtract-with-Borrow Instructions is
moved to Section 11.4 in RVV v1.0 spec. Update the comment, no
functional changes.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-77-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-76-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add vector unit-stride mask load/store insns

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-75-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add evl parameter to vext_ldst_us()

Add supports of Vector unit-stride mask load/store instructions
(vlm.v, vsm.v), which has:
    evl (effective vector length) = ceil(env->vl / 8).

The new instructions operate the same as unmasked byte loads and stores.
Add evl parameter to reuse vext_ldst_us().

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-74-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add vsetivli instruction

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-73-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11

Rename r2_zimm to r2_zimm11 for the upcoming vsetivli instruction.
vsetivli has 10-bits of zimm but vsetvli has 11-bits of zimm.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-72-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point reciprocal estimate instruction

Implement the floating-point reciprocal estimate to 7 bits instruction.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-71-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point reciprocal square-root estimate instruction

Implement the floating-point reciprocal square-root estimate to 7 bits
instruction.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-70-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: gdb: support vector registers for rv64 & rv32

Signed-off-by: Hsiangkai Wang <kai.wang@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-69-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: trigger illegal instruction exception if frm is not valid

If the frm field contains an invalid rounding mode (101-111),
attempting to execute any vector floating-point instruction, even
those that do not depend on the rounding mode, will raise an illegal
instruction exception.

Call gen_set_rm() with DYN rounding mode to check and trigger illegal
instruction exception if frm field contains invalid value at run-time
for vector floating-point instructions.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-68-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: implement vstart CSR

* Update and check vstart value for vector instructions.
* Add whole register move instruction helper functions as we have to
  call helper function for case where vstart is not zero.
* Remove probe_pages() calls in vector load/store instructions
  (except fault-only-first loads) to raise the memory access exception
  at the exact processed vector element.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-67-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-66-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: narrowing floating-point/integer type-convert

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-65-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: add "set round to odd" rounding mode helper function

helper_set_rounding_mode() is responsible for SIGILL, and "round to odd"
should be an interface private to translation, so add a new independent
helper_set_rod_rounding_mode().

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-64-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: widening floating-point/integer type-convert

Add the following instructions:

* vfwcvt.rtz.xu.f.v
* vfwcvt.rtz.x.f.v

Also adjust GEN_OPFV_WIDEN_TRANS() to accept multiple floating-point
rounding modes.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-63-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point/integer type-convert instructions

Add the following instructions:

* vfcvt.rtz.xu.f.v
* vfcvt.rtz.x.f.v

Also adjust GEN_OPFV_TRANS() to accept multiple floating-point rounding
modes.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-62-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: introduce floating-point rounding mode enum

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-61-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point min/max instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-60-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: remove integer extract instruction

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-59-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: remove vmford.vv and vmford.vf

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-58-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: remove widening saturating scaled multiply-add

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-57-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: single-width scaling shift instructions

log(SEW) truncate vssra.vi immediate value.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-56-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: widening floating-point reduction instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-55-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: single-width floating-point reduction

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-54-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: narrowing fixed-point clip instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-53-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point slide instructions

Add the following instructions:

* vfslide1up.vf
* vfslide1down.vf

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-52-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: slide instructions

* Remove clear function from helper functions as the tail elements
  are unchanged in RVV 1.0.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-51-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: mask-register logical instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-50-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point compare instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-49-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: integer comparison instructions

* Sign-extend vmselu.vi and vmsgtu.vi immediate values.
* Remove "set tail elements to zeros" as tail elements can be unchanged
  for either VTA to have undisturbed or agnostic setting.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-48-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: single-width saturating add and subtract instructions

Sign-extend vsaddu.vi immediate value.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-47-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: widening integer multiply-add instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-46-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: narrowing integer right shift instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-45-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow

* Only do carry-in or borrow-in if is masked (vm=0).
* Remove clear function from helper functions as the tail elements
  are unchanged in RVV 1.0.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-44-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: single-width bit shift instructions

Truncate vsll.vi, vsrl.vi, vsra.vi's immediate values to lg2(SEW) bits.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-43-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: single-width averaging add and subtract instructions

Add the following instructions:

* vaaddu.vv
* vaaddu.vx
* vasubu.vv
* vasubu.vx

Remove the following instructions:

* vadd.vi

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-42-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: integer extension instructions

Add the following instructions:

* vzext.vf2
* vzext.vf4
* vzext.vf8
* vsext.vf2
* vsext.vf4
* vsext.vf8

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211210075704.23951-41-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: whole register move instructions

Add the following instructions:

* vmv1r.v
* vmv2r.v
* vmv4r.v
* vmv8r.v

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-40-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point scalar move instructions

NaN-boxed the scalar floating-point register based on RVV 1.0's rules.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-39-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point move instruction

NaN-boxed the scalar floating-point register based on RVV 1.0's rules.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-38-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: integer scalar move instructions

* Remove "vmv.s.x: dothing if rs1 == 0" constraint.
* Add vmv.x.s instruction.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-37-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: register gather instructions

* Add vrgatherei16.vv instruction.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-36-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: allow load element with sign-extended

For some vector instructions (e.g. vmv.s.x), the element is loaded with
sign-extended.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-35-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: element index instruction

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-34-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: iota instruction

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-33-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: set-X-first mask bit instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-32-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: find-first-set mask bit instruction

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-31-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: count population in mask instruction

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-30-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point classify instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-29-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: floating-point square-root instruction

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-28-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: take fractional LMUL into vector max elements calculation

Update vext_get_vlmax() and MAXSZ() to take fractional LMUL into
calculation for RVV 1.0.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-27-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: update vext_max_elems() for load/store insns

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-26-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: load/store whole register instructions

Add the following instructions:

* vl<nf>re<eew>.v
* vs<nf>r.v

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-25-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: fault-only-first unit stride load

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-24-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: fix address index overflow bug of indexed load/store insns

Replace ETYPE from signed int to unsigned int to prevent index overflow
issue, which would lead to wrong index address.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-23-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: index load and store instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-22-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: stride load and store instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-21-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: configure instructions

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-20-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: remove amo operations instructions

Vector AMOs are removed from standard vector extensions. Will be added
later as separate Zvamo extension, but will need a different encoding
from earlier proposal.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-19-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv:1.0: add translation-time nan-box helper function

* Add fp16 nan-box check generator function, if a 16-bit input is not
  properly nanboxed, then the input is replaced with the default qnan.
* Add do_nanbox() helper function to utilize gen_check_nanbox_X() to
  generate the NaN-boxed floating-point values based on SEW setting.
* Apply nanbox helper in opfvf_trans().

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-18-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: introduce more imm value modes in translator functions

Immediate value in translator function is extended not only
zero-extended and sign-extended but with more modes to be applicable
with multiple formats of vector instructions.

* IMM_ZX:         Zero-extended
* IMM_SX:         Sign-extended
* IMM_TRUNC_SEW:  Truncate to log(SEW) bit
* IMM_TRUNC_2SEW: Truncate to log(2*SEW) bit

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-17-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: update check functions

Update check functions with RVV 1.0 rules.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-16-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add VMA and VTA

Introduce vma and vta fields in vtype register.

According to RVV 1.0 spec (section 3.3.3):

When a set is marked agnostic, the corresponding set of destination
elements in any vector or mask destination operand can either retain
the value they previously held, or are overwritten with 1s.

So, either vta/vma is set to undisturbed or agnostic, it's legal to
retain the inactive masked-off elements and tail elements' original
values unchanged. Therefore, besides declaring vta/vma fields in vtype
register, also remove all the tail elements clean functions in this
commit.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-15-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add fractional LMUL

Introduce the concepts of fractional LMUL for RVV 1.0.
In RVV 1.0, LMUL bits are contiguous in vtype register.

Also rearrange rvv bits in TB_FLAGS to skip MSTATUS_VS (0x600)
and MSTATUS_FS (0x6000) bits.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-14-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: remove MLEN calculations

As in RVV 1.0 design, MLEN is hardcoded with value 1 (Section 4.5).
Thus, remove all MLEN related calculations.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-13-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr registers

If VS field is off, accessing vector csr registers should raise an
illegal-instruction exception.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-12-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add vlenb register

Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-11-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add vcsr register

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-10-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: remove rvv related codes from fcsr registers

* Remove VXRM and VXSAT fields from FCSR register as they are only
  presented in VCSR register.
* Remove RVV loose check in fs() predicate function.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-9-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add translation-time vector context status

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-8-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: introduce writable misa.v field

Implementations may have a writable misa.v field. Analogous to the way
in which the floating-point unit is handled, the mstatus.vs field may
exist even if misa.v is clear.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-7-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add sstatus VS field

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-6-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: set mstatus.SD bit if mstatus.VS is dirty

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: rvv-1.0: add mstatus VS field

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use FIELD_EX32() to extract wd field

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: drop vector 0.7.1 and add 1.0 support

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20211210075704.23951-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: zfh: add Zfhmin cpu property

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-9-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: zfh: implement zfhmin extension

Zfhmin extension is a subset of Zfh extension, consisting only of data
transfer and conversion instructions.

If enabled, only the following instructions from Zfh extension are
included:
  * flh, fsh, fmv.x.h, fmv.h.x, fcvt.s.h, fcvt.h.s
  * If D extension is present: fcvt.d.h, fcvt.h.d

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-8-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: zfh: add Zfh cpu property

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-7-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: zfh: half-precision floating-point classify

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-6-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: zfh: half-precision floating-point compare

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-5-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: zfh: half-precision convert and move

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-4-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: zfh: half-precision computational

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211210074329.5775-3-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: zfh: half-precision load and store

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211210074329.5775-2-frank.chang@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* configure and meson cleanups and fixes
* remove unnecessary #ifdef
* SCSI and i386 fixes

# gpg: Signature made Sat 18 Dec 2021 02:00:22 AM PST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
  hw/i386/vmmouse: Require 'i8042' property to be set
  tests/qtest/fuzz-megasas-test: Add test for GitLab issue #521
  hw/scsi/megasas: Fails command if SGL buffer overflows
  hw/scsi: Fix scsi_bus_init_named() docstring
  meson: add "check" argument to run_command
  cpu: remove unnecessary #ifdef CONFIG_TCG
  meson: reenable test-fdmon-epoll
  configure: remove DIRS
  configure: remove unnecessary symlinks
  configure, meson: move ARCH to meson.build
  meson: rename "arch" variable
  configure: unify x86_64 and x32
  configure: unify ppc64 and ppc64le
  configure: unify two case statements on $cpu
  configure: move target detection before CPU detection
  configure: make $targetos lowercase, use windows instead of MINGW32

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/i386/vmmouse: Require 'i8042' property to be set

If the 'i8042' property is not set, mouse events handled by
vmmouse_mouse_event() end calling i8042_isa_mouse_fake_event()
with a NULL argument, resulting in ps2_mouse_fake_event() being
called with invalid PS2MouseState pointer. Fix by requiring
the 'i8042' property to be always set:

  $ qemu-system-x86_64 -device vmmouse
  qemu-system-x86_64: -device vmmouse: 'i8042' link is not set

Fixes: 91c9e09147b ("vmmouse: convert to qdev")
Reported-by: Calvin Buckley <calvin@cmpct.info>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/752
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211201223253.36080-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tests/qtest/fuzz-megasas-test: Add test for GitLab issue #521

Without the previous commit, this test triggers:

  $ make check-qtest-x86_64
  [...]
  Running test qtest-x86_64/fuzz-megasas-test
  qemu-system-x86_64: softmmu/physmem.c:3229: address_space_unmap: Assertion `mr != NULL' failed.
  Broken pipe
  ERROR qtest-x86_64/fuzz-megasas-test - too few tests run (expected 2, got 1)

Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20211119201141.532377-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/scsi/megasas: Fails command if SGL buffer overflows

If we detect an overflow on the SGL buffer, do not
keep processing the command: discard it. TARGET_FAILURE
sense code will be returned (MFI_STAT_SCSI_DONE_WITH_ERROR).

Reported-by: Alexander Bulekov <alxndr@bu.edu>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/521
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20211119201141.532377-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/scsi: Fix scsi_bus_init_named() docstring

Commit 739e95f5741 ("scsi: Replace scsi_bus_new() with
scsi_bus_init(), scsi_bus_init_named()") forgot to rename
scsi_bus_init() in the function documentation string.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211122104744.1051554-1-f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: add "check" argument to run_command

Meson is planning to change the default of the "check" argument to
run_command (from false to true).  Be explicit and include it in
all invocations.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

cpu: remove unnecessary #ifdef CONFIG_TCG

"if (tcg_enabled())" allows elision of the code inside it; we only need
the prototype to exist, so that the code compile even for the --disable-tcg
case.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: reenable test-fdmon-epoll

The test was disabled when CONFIG_EPOLL_CREATE1 was moved out
of config-host.mak.  Fix the condition.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: remove DIRS

DIRS is used to create the directory in which the LINKS symbolic links
reside, or to create directories for object files.  The former can
be done directly in the symlinking loop, while the latter is done
by Meson already, so DIRS is not necessary.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure: remove unnecessary symlinks

Make pc-bios/meson.build use the files in the source tree as inputs
to bzip2.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure, meson: move ARCH to meson.build

$ARCH and the HOST_* symbols are only used by the QEMU build; configure
uses $cpu instead.  Remove it from config-host.mak.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>