Merge remote-tracking branch 'armbru/tags/pull-qapi-2017-05-23' into staging

QAPI patches for 2017-05-23

# gpg: Signature made Tue 23 May 2017 12:33:32 PM BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* armbru/tags/pull-qapi-2017-05-23:
  qapi-schema: Remove obsolete note from ObjectTypeInfo
  block: Use QDict helpers for --force-share
  shutdown: Expose bool cause in SHUTDOWN and RESET events
  shutdown: Add source information to SHUTDOWN and RESET
  shutdown: Preserve shutdown cause through replay
  shutdown: Prepare for use of an enum in reset/shutdown_request
  shutdown: Simplify shutdown_signal
  sockets: Plug memory leak in socket_address_flatten()
  scripts/qmp/qom-set: fix the value argument passed to srv.command()

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'ehabkost/tags/numa-pull-request' into staging

Silence "make check" warnings on NUMA test

# gpg: Signature made Tue 23 May 2017 11:44:24 AM BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* ehabkost/tags/numa-pull-request:
  numa: Silence incomplete mapping warning under qtest

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'cohuck/tags/s390x-20170523' into staging

s390x updates:
- support for vfio-ccw to passthrough channel devices
- allow ccw bios to boot from scsi generic devices
- bugfix for initial reset

# gpg: Signature made Tue 23 May 2017 12:02:24 PM BST
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* cohuck/tags/s390x-20170523: (21 commits)
  s390/kvm: do not reset riccb on initial cpu reset
  MAINTAINERS: Add vfio-ccw maintainer
  vfio/ccw: update sense data if a unit check is pending
  s390x/css: ccw translation infrastructure
  s390x/css: introduce and realize ccw-request callback
  vfio/ccw: get irqs info and set the eventfd fd
  vfio/ccw: get io region info
  vfio/ccw: vfio based subchannel passthrough driver
  s390x/css: device support for s390-ccw passthrough
  s390x/css: realize css_create_sch
  s390x/css: realize css_sch_build_schib
  s390x/css: add s390-squash-mcss machine option
  linux-headers: update
  pc-bios/s390-ccw.img: rebuild image
  pc-bios/s390-ccw: Build a reasonable max_sectors limit
  pc-bios/s390-ccw: Get Block Limits VPD device data
  pc-bios/s390-ccw: Get list of supported VPD pages
  pc-bios/s390-ccw: Refactor scsi_inquiry function
  pc-bios/s390-ccw: Break up virtio-scsi read into multiples
  pc-bios/s390-ccw: Move SCSI block factor to outer read
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'jasowang/tags/net-pull-request' into staging

# gpg: Signature made Tue 23 May 2017 03:27:37 AM BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* jasowang/tags/net-pull-request:
  e1000e: Fix ICR "Other" causes clear logic
  net/filter-rewriter: Remove unused option in filter-rewriter
  net/filter-mirror.c: Rename filter_mirror_send() and fix codestyle
  net/filter-mirror.c: Remove duplicate check code.
  hmp / net: Mark host_net_add/remove as deprecated
  COLO-compare: Improve tcp compare trace event readability
  virtio-net: fix wild pointer when remove virtio-net queues
  net/dump: Issue a warning for the deprecated "-net dump"
  net/tap: Replace tap-haiku.c and tap-aix.c by a generic tap-stub.c

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

qapi-schema: Remove obsolete note from ObjectTypeInfo

The "This command is experimental" note in ObjectTypeInfo is obsolete
since 2012.  Commit 5192082097549c5b3aa7c913c6853d97a68172cb removed the
warning from the qom-list-types command documentation, but we forgot to
remove the warning from ObjectTypeInfo.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170516205351.12101-1-ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

block: Use QDict helpers for --force-share

Fam's addition of --force-share in commits 459571f7 and 335e9937
were developed prior to the addition of QDict scalar insertion
macros, but merged after the general cleanup in commit 46f5ac20.
Patch created mechanically by rerunning:

 spatch --sp-file scripts/coccinelle/qobject.cocci \
        --macro-file scripts/cocci-macro-file.h --dir . --in-place

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515195439.17677-1-eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

shutdown: Expose bool cause in SHUTDOWN and RESET events

Libvirt would like to be able to distinguish between a SHUTDOWN
event triggered solely by guest request and one triggered by a
SIGTERM or other action on the host.  While qemu_kill_report() was
already able to give different output to stderr based on whether a
shutdown was triggered by a host signal (but NOT by a host UI event,
such as clicking the X on the window), that information was then
lost to management.  The previous patches improved things to use an
enum throughout all callsites, so now we have something ready to
expose through QMP.

Note that for now, the decision was to expose ONLY a boolean,
rather than promoting ShutdownCause to a QAPI enum; this is because
libvirt has not expressed an interest in anything finer-grained.
We can still add additional details, in a backwards-compatible
manner, if a need later arises (if the addition happens before 2.10,
we can replace the bool with an enum; otherwise, the enum will have
to be in addition to the bool); this patch merely adds a helper
shutdown_caused_by_guest() to map the internal enum into the
external boolean.

Update expected iotest outputs to match the new data (complete
coverage of the affected tests is obtained by -raw, -qcow2, and -nbd).

Here is output from 'virsh qemu-monitor-event --loop' with the
patch installed:

event SHUTDOWN at 1492639680.731251 for domain fedora_13: {"guest":true}
event STOP at 1492639680.732116 for domain fedora_13: <null>
event SHUTDOWN at 1492639680.732830 for domain fedora_13: {"guest":false}

Note that libvirt runs qemu with -no-shutdown: the first SHUTDOWN event
was triggered by an action I took directly in the guest (shutdown -h),
at which point qemu stops the vcpus and waits for libvirt to do any
final cleanups; the second SHUTDOWN event is the result of libvirt
sending SIGTERM now that it has completed cleanup.  Libvirt is already
smart enough to only feed the first qemu SHUTDOWN event to the end user
(remember, virsh qemu-monitor-event is a low-level debugging interface
that is explicitly unsupported by libvirt, so it sees things that normal
end users do not); changing qemu to emit SHUTDOWN only once is outside
the scope of this series.

See also https://bugzilla.redhat.com/1384007

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

shutdown: Add source information to SHUTDOWN and RESET

Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.

It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.

Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

shutdown: Preserve shutdown cause through replay

With the recent addition of ShutdownCause, we want to be able to pass
a cause through any shutdown request, and then faithfully replay that
cause when later replaying the same sequence.  The easiest way is to
expand the reply event mechanism to track a series of values for
EVENT_SHUTDOWN, one corresponding to each value of ShutdownCause.

We are free to change the replay stream as needed, since there are
already no guarantees about being able to use a replay stream by
any other version of qemu than the one that generated it.

The cause is not actually fed back until the next patch changes the
signature for requesting a shutdown; a TODO marks that upcoming change.

Yes, this uses the gcc/clang extension of a ranged case label,
but this is not the first time we've used non-C99 constructs.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170515214114.15442-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

shutdown: Prepare for use of an enum in reset/shutdown_request

We want to track why a guest was shutdown; in particular, being able
to tell the difference between a guest request (such as ACPI request)
and host request (such as SIGINT) will prove useful to libvirt.
Since all requests eventually end up changing shutdown_requested in
vl.c, the logical change is to make that value track the reason,
rather than its current 0/1 contents.

Since command-line options control whether a reset request is turned
into a shutdown request instead, the same treatment is given to
reset_requested.

This patch adds an internal enum ShutdownCause that describes reasons
that a shutdown can be requested, and changes qemu_system_reset() to
pass the reason through, although for now nothing is actually changed
with regards to what gets reported.  The enum could be exported via
QAPI at a later date, if deemed necessary, but for now, there has not
been a request to expose that much detail to end clients.

For the most part, we turn 0 into SHUTDOWN_CAUSE_NONE, and 1 into
SHUTDOWN_CAUSE_HOST_ERROR; the only specific case where we have enough
information right now to use a different value is when we are reacting
to a host signal.  It will take a further patch to edit all call-sites
that can trigger a reset or shutdown request to properly pass in any
other reasons; this patch includes TODOs to point such places out.

qemu_system_reset() trades its 'bool report' parameter for a
'ShutdownCause reason', with all non-zero values having the same
effect; this lets us get rid of the weird #defines for VMRESET_*
as synonyms for bools.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

shutdown: Simplify shutdown_signal

There is no signal 0 (kill(pid, 0) has special semantics to probe whether
a process is alive), rather than actually sending a signal 0).  So we
can use the simpler 0, instead of -1, for our sentinel of whether a
shutdown request due to a signal has happened.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20170515214114.15442-2-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

sockets: Plug memory leak in socket_address_flatten()

socket_address_flatten() leaks a SocketAddress when its argument is
null.  Happens when opening a ChardevBackend of type 'udp' that is
configured without a local address.  Screwed up in commit bd269ebc due
to last minute semantic conflict resolution.  Spotted by Coverity.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1494866344-11013-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

scripts/qmp/qom-set: fix the value argument passed to srv.command()

When invoking the script with -s, we end up passing a bogus value
to QEMU:

$ ./scripts/qmp/qom-set -s /var/tmp/qmp-sock-exp /machine.accel kvm
{}
$ ./scripts/qmp/qom-get -s /var/tmp/qmp-sock-exp /machine.accel
/var/tmp/qmp-sock-exp

This happens because sys.argv[2] isn't necessarily the command line
argument that holds the value. It is sys.argv[4] when -s was also
passed.

Actually, the code already has a variable to handle that. This patch
simply uses it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <149373610338.5144.9635049015143453288.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

e1000e: Fix ICR "Other" causes clear logic

This commit fixes a bug which causes the guest to hang. The bug was
observed upon a "receive overrun" (bit #6 of the ICR register)
interrupt which could be triggered post migration in a heavy traffic
environment. Even though the "receive overrun" bit (#6) is masked out
by the IMS register (refer to the log below) the driver still receives
an interrupt as the "receive overrun" bit (#6) causes the "Other" -
bit #24 of the ICR register - bit to be set as documented below. The
driver handles the interrupt and clears the "Other" bit (#24) but
doesn't clear the "receive overrun" bit (#6) which leads to an
infinite loop. Apparently the Windows driver expects that the "receive
overrun" bit and other ones - documented below - to be cleared when
the "Other" bit (#24) is cleared.

So to sum that up:
1. Bit #6 of the ICR register is set by heavy traffic
2. As a results of setting bit #6, bit #24 is set
3. The driver receives an interrupt for bit 24 (it doesn't receieve an
   interrupt for bit #6 as it is masked out by IMS)
4. The driver handles and clears the interrupt of bit #24
5. Bit #6 is still set.
6. 2 happens all over again

The Interrupt Cause Read - ICR register:

The ICR has the "Other" bit - bit #24 - that is set when one or more
of the following ICR register's bits are set:

LSC - bit #2, RXO - bit #6, MDAC - bit #9, SRPD - bit #16, ACK - bit
#17, MNG - bit #18

This bug can occur with any of these bits depending on the driver's
behaviour and the way it configures the device. However, trying to
reproduce it with any bit other than RX0 is challenging and came to
failure as the drivers don't implement most of these bits, trying to
reproduce it with LSC (Link Status Change - bit #2) bit didn't succeed
too as it seems that Windows handles this bit differently.

Log sample of the storm:

27563@1494850819.411877:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004)
27563@1494850819.411900:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.411915:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412380:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412395:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412436:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412441:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412998:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004)

* This bug behaviour wasn't observed with the Linux driver.

This commit solves:
https://bugzilla.redhat.com/show_bug.cgi?id=1447935
https://bugzilla.redhat.com/show_bug.cgi?id=1449490

Cc: qemu-stable@nongnu.org
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/filter-rewriter: Remove unused option in filter-rewriter

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/filter-mirror.c: Rename filter_mirror_send() and fix codestyle

Because filter_mirror_receive_iov() and filter_redirector_receive_iov()
both use the filter_mirror_send() to send packet, so I change
filter_mirror_send() to filter_send() that looks more common.
And fix some codestyle.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/filter-mirror.c: Remove duplicate check code.

The s->outdev have checked in filter_mirror_set_outdev().

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hmp / net: Mark host_net_add/remove as deprecated

The netdev_add and netdev_del commands should be used nowadays instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

COLO-compare: Improve tcp compare trace event readability

Because of previous patch's trace arguments over the limit
of UST backend, so I rewrite the patch.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

virtio-net: fix wild pointer when remove virtio-net queues

The tx_bh or tx_timer will free in virtio_net_del_queue() function, when
removing virtio-net queues if the guest doesn't support multiqueue. But
it might be still referenced by virtio_net_set_status(), which needs to
be set NULL. And also the tx_waiting needs to be set zero to prevent
virtio_net_set_status() accessing tx_bh or tx_timer.

Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/dump: Issue a warning for the deprecated "-net dump"

Network dumping should be done with "-object filter-dump" nowadays.
Using "-net dump" via the VLAN mechanism is considered as deprecated
and might be removed in a future release. So warn the users now
to inform them to user the filter-dump method instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

net/tap: Replace tap-haiku.c and tap-aix.c by a generic tap-stub.c

The files tap-haiku.c and tap-aix.c are identical (except one line
of error message). We should avoid such code duplication, so replace
these by a generic tap-stub.c file instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

numa: Silence incomplete mapping warning under qtest

Silence "make check" warnings triggered by the numa/mon/cpus/partial
test case.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1495094971-177754-4-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Merge remote-tracking branch 'mcayland/tags/qemu-openbios-signed' into staging

Update OpenBIOS images

# gpg: Signature made Fri 19 May 2017 05:05:54 PM BST
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images to 3ebaaa2 built from submodule.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'kraxel/tags/pull-audio-20170519-1' into staging

audio: move & rename soundhw init code.

# gpg: Signature made Fri 19 May 2017 12:22:51 PM BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* kraxel/tags/pull-audio-20170519-1:
  audio: Rename hw/audio/audio.h to hw/audio/soundhw.h
  audio: Rename audio_init() to soundhw_init()
  audio: Move arch_init audio code to hw/audio/soundhw.c

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Update OpenBIOS images to 3ebaaa2 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Merge remote-tracking branch 'kraxel/tags/pull-ui-20170519-1' into staging

ui: egl-headless requires dmabuf support

# gpg: Signature made Fri 19 May 2017 09:46:40 AM BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* kraxel/tags/pull-ui-20170519-1:
  ui: egl-headless requires dmabuf support

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'quintela/tags/migration/20170518' into staging

migration/next for 20170518

# gpg: Signature made Thu 18 May 2017 06:23:26 PM BST
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* quintela/tags/migration/20170518:
  migration: Make savevm.c target independent
  exec: Create include for target_page_size()
  migration: migration.h was not needed
  migration: Remove vmstate.h from migration.h
  migration: Remove qemu-file.h from vmstate.h
  migration: Split vmstate-types.c from vmstate.c
  migration: Move qjson.h to migration/
  migration: Remove migration.h from colo.h
  migration: Export qemu-file-channel.c functions in its own file
  migration: Split migration/channel.c for channel operations
  migration: Create migration/xbzrle.h
  block migration: Allow compile time disable
  migration: Remove old MigrationParams
  migration: Remove use of old MigrationParams
  migration: Create block capability
  hmp: Use visitor api for hmp_migrate_set_parameter()
  postcopy: Require RAMBlocks that are whole pages
  migration: Fix non-multiple of page size migration

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

s390/kvm: do not reset riccb on initial cpu reset

The riccb is kept unchanged during initial cpu reset. Move the data
structure to the other registers that are unchanged.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

MAINTAINERS: Add vfio-ccw maintainer

Add Cornelia Huck as the vfio-ccw maintainer.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-14-bjsdjshi@linux.vnet.ibm.com>
[CH: add tree]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

vfio/ccw: update sense data if a unit check is pending

Concurrent-sense data is currently not delivered. This patch stores
the concurrent-sense data to the subchannel if a unit check is pending
and the concurrent-sense bit is enabled. Then a TSCH can retreive the
right IRB data back to the guest.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-13-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

s390x/css: ccw translation infrastructure

Implement a basic infrastructure of handling channel I/O instruction
interception for passed through subchannels:
1. Branch the code path of instruction interception handling by
   SubChannel type.
2. For a passed-through subchannel, issue the ORB to kernel to do ccw
   translation and perform an I/O operation.
3. Assign different condition code based on the I/O result, or
   trigger a program check.

Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-12-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

s390x/css: introduce and realize ccw-request callback

Introduce a new callback on subchannel to handle ccw-request.
Realize the callback in vfio-ccw device. Besides, resort to
the event notifier handler to handling the ccw-request results.
1. Pread the I/O results via MMIO region.
2. Update the scsw info to guest.
3. Inject an I/O interrupt to notify guest the I/O result.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-11-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

vfio/ccw: get irqs info and set the eventfd fd

vfio-ccw resorts to the eventfd mechanism to communicate with userspace.
We fetch the irqs info via the ioctl VFIO_DEVICE_GET_IRQ_INFO,
register a event notifier to get the eventfd fd which is sent
to kernel via the ioctl VFIO_DEVICE_SET_IRQS, then we can implement
read operation once kernel sends the signal.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-10-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

vfio/ccw: get io region info

vfio-ccw provides an MMIO region for I/O operations. We fetch its
information via ioctls here, then we can use it performing I/O
instructions and retrieving I/O results later on.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-9-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

vfio/ccw: vfio based subchannel passthrough driver

We use the IOMMU_TYPE1 of VFIO to realize the subchannels
passthrough, implement a vfio based subchannels passthrough
driver called "vfio-ccw".

Support qemu parameters in the style of:
"-device vfio-ccw,sysfsdev=$mdev_file_path,devno=xx.x.xxxx'

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-8-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

s390x/css: device support for s390-ccw passthrough

In order to support subchannels pass-through, we introduce a s390
subchannel device called "s390-ccw" to hold the real subchannel info.
The s390-ccw devices inherit from the abstract CcwDevice which connect
to the existing virtual-css-bus.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-7-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

s390x/css: realize css_create_sch

The S390 virtual css support already has a mechanism to create a
virtual subchannel and provide it to the guest. However, to
pass-through subchannels to a guest, we need to introduce a new
mechanism to create the subchannel according to the real device
information. Thus we reconstruct css_create_virtual_sch to a new
css_create_sch function to handle all these cases and do allocation
and initialization of the subchannel according to the device type
and machine configuration.

Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-6-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

s390x/css: realize css_sch_build_schib

The S390 virtual css support already has a mechanism to build a
virtual subchannel information block (schib) and provide virtual
subchannels to the guest. However, to pass-through subchannels to
a guest, we need to introduce a new mechanism to build its schib
according to the real device information. Thus we realize a new css
sch_build_schib function to extract the path_masks, chpids, chpid
type from sysfs. To reuse the existing code, we refactor
css_add_virtual_chpid to css_add_chpid.

Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-5-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

s390x/css: add s390-squash-mcss machine option

We want to support real (i.e. not virtual) channel devices
even for guests that do not support MCSS-E (where guests may
see devices from any channel subsystem image at once). As all
virtio-ccw devices are in css 0xfe (and show up in the default
css 0 for guests not activating MCSS-E), we need an option to
squash both the virtio subchannels and e.g. passed-through
subchannels from their real css (0-3, or 0 for hosts not
activating MCSS-E) into the default css. This will be
exploited in a later patch.

Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-4-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

linux-headers: update

Update against Linux v4.12-rc1.

Also include the new vfio_ccw.h header.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw.img: rebuild image

Contains the following commits:
- pc-bios/s390-ccw: Remove duplicate blk_factor adjustment
- pc-bios/s390-ccw: Move SCSI block factor to outer read
- pc-bios/s390-ccw: Break up virtio-scsi read into multiples
- pc-bios/s390-ccw: Refactor scsi_inquiry function
- pc-bios/s390-ccw: Get list of supported EVPD pages
- pc-bios/s390-ccw: Get Block Limits VPD device data
- pc-bios/s390-ccw: Build a reasonable max_sectors limit

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-9-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw: Build a reasonable max_sectors limit

Now that we've read all the possible limits that have been defined for
a virtio-scsi controller and the disk we're booting from, it's possible
that we are STILL going to exceed the limits of the host device.
For example, a "-device scsi-generic" device does not support the
Block Limits VPD page.

So, let's fallback to something that seems to work for most boot
configurations if larger values were specified (including if nothing
was explicitly specified, and we took default values).

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-8-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw: Get Block Limits VPD device data

The "Block Limits" Inquiry VPD page is optional for any SCSI device,
but if it's supported it provides a hint of the maximum I/O transfer
length for this particular device. If this page is supported by the
disk, let's issue that Inquiry and use the minimum of it and the
SCSI controller limit. That will cover this scenario:

  qemu-system-s390x ...
    -device virtio-scsi-ccw,id=scsi0,max_sectors=32768 ...
    -drive file=/dev/sda,if=none,id=drive0,format=raw ...
    -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,
            drive=drive0,id=disk0,max_io_size=1048576

controller: 32768 sectors x 512 bytes/sector = 16777216 bytes
      disk:                                     1048576 bytes

Now that we have a limit for a virtio-scsi disk, compare that with the
limit for the virtio-scsi controller when we actually build the I/O.
The minimum of these two limits should be the one we use.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-7-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw: Get list of supported VPD pages

The "Supported Pages" Inquiry EVPD page is mandatory for all SCSI devices,
and is used as a gateway for what VPD pages the device actually supports.
Let's issue this Inquiry, and dump that list with the debug facility.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-6-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw: Refactor scsi_inquiry function

If we want to issue any of the SCSI Inquiry EVPD pages,
which we do, we could use this function to issue both types
of commands with a little bit of refactoring.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-5-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw: Break up virtio-scsi read into multiples

A virtio-scsi request that goes through the host sd driver and exceeds
the maximum transfer size is automatically broken up for us.  But the
equivalent request going to the sg driver presumes that any length
requirements have already been honored.

Let's use the max_sectors field on the virtio-scsi controller device,
and break up all requests (both sd and sg) to avoid this problem.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-4-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw: Move SCSI block factor to outer read

Simple refactoring so that the blk_factor adjustment is
moved into virtio_scsi_read_many routine, in preparation
for another change.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-3-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

pc-bios/s390-ccw: Remove duplicate blk_factor adjustment

When using virtio-scsi, we multiply the READ(10) data_size by
a block factor twice when building the I/O.  This is fine,
since it's only 1 for SCSI disks, but let's clean it up.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20170510155359.32727-2-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

audio: Rename hw/audio/audio.h to hw/audio/soundhw.h

All the functions in hw/audio/audio.h are called "soundhw_*()"
and live in hw/audio/audiohw.c. Rename the header file for
consistency.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 20170508205735.23444-4-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: Rename audio_init() to soundhw_init()

To make it consistent with the remaining soundhw.c functions and
avoid confusion with the audio_init() function in audio/audio.c,
rename audio_init() to soundhw_init().

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20170508205735.23444-3-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: Move arch_init audio code to hw/audio/soundhw.c

There's no reason to keep the soundhw table in arch_init.c. Move
that code to a new hw/audio/soundhw.c file.

While moving the code, trivial coding style issues were fixed.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170508205735.23444-2-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ui: egl-headless requires dmabuf support

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170517122744.3541-1-kraxel@redhat.com

migration: Make savevm.c target independent

It only needed TARGET_PAGE_SIZE/BITS/BITS_MIN values, so just export
them from exec.h

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

exec: Create include for target_page_size()

That is the only function that we need from exec.c, and having to
include the whole sysemu.h for this.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---

/me leans to be less sloppy with copyright notices
thanks Dave

migration: migration.h was not needed

This files don't use any function from migration.h, so drop it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Remove vmstate.h from migration.h

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---

Minor rearrangements due to rebase

migration: Remove qemu-file.h from vmstate.h

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--

minor rearangements due to the rebase

migration: Split vmstate-types.c from vmstate.c

Now one just has the interperter, and the other has the basic types.
Once there, add copyright boilerplate.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--

Use GPL v2 or later.  Detected by David.

migration: Move qjson.h to migration/

It is only used for migration code.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Remove migration.h from colo.h

migration.h is not included in any includes now.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Export qemu-file-channel.c functions in its own file

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Split migration/channel.c for channel operations

Create an include for its exported functions.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Add proper header

migration: Create migration/xbzrle.h

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

block migration: Allow compile time disable

Many users now prefer to use drive_mirror over NBD as an
alternative to the older migrate -b option; drive_mirror is
more complex to setup but gives you more options (e.g. only
migrating some of the disks if some of them are shared).

Allow the large chunk of block migration code to be compiled
out for those who don't use it.

Based on a downstream-patch we've had for a while by Jeff Cody.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
--

- When compiled out, allow seting block only with false value (eric)

migration: Remove old MigrationParams

Not used anymore after moving block migration to use capabilities.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Remove use of old MigrationParams

We have change in the previous patch to use migration capabilities for
it.  Notice that we continue using the old command line flags from
migrate command from the time being.  Remove the set_params method as
now it is empty.

For savevm, one can't do a:

savevm -b/-i foo

but now one can do:

migrate_set_capability block on
savevm foo

And we can't use block migration. We could disable block capability
unconditionally, but it would not be much better.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- Maintain shared/enabled dependency (Xu suggestion)
- Now we maintain the dependency on the setter functions
- improve error messages

migration: Create block capability

Create one capability for block migration and one parameter for
incremental block migration.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---

- address all Markus comments
- use Markus and Eric text descriptions
- change logic another time
- improve text messages

hmp: Use visitor api for hmp_migrate_set_parameter()

We only use it for int64 at this point, I am not able to find a way to
parse an int with MiB units.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

postcopy: Require RAMBlocks that are whole pages

It turns out that it's legal to create a VM with RAMBlocks that aren't
a multiple of the pagesize in use; e.g. a 1025M main memory using
2M host pages.  That breaks postcopy's atomic placement of pages,
so disallow it.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Fix non-multiple of page size migration

Unfortunately it's legal to create a VM with a RAM size that's
not a multiple of the underlying host page or huge page size.
Recently I'd changed things to always send host sized pages,
and that breaks if we have say a 1025MB guest on 2MB hugepages.

Unfortunately we can't just make that illegal since it would break
migration from/to existing oddly configured VMs.

Symptom: qemu-system-x86_64: Illegal RAM offset 40100000
     as it transmits the fraction of the hugepage after the end
     of the RAMBlock (may also cause a crash on the source
     - possibly due to clearing bits after the bitmap)

Reported-by: Yumei Huang <yuhuang@redhat.com>
Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1449037

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Merge remote-tracking branch 'dgilbert/tags/pull-hmp-20170517' into staging

HMP pull

# gpg: Signature made Wed 17 May 2017 07:03:39 PM BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* dgilbert/tags/pull-hmp-20170517:
  ramblock: add new hmp command "info ramblock"
  utils: provide size_to_str()
  ramblock: add RAMBLOCK_FOREACH()

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'quintela/tags/migration/20170517' into staging

migration/next for 20170517

# gpg: Signature made Wed 17 May 2017 11:46:36 AM BST
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* quintela/tags/migration/20170517:
  migration: Move check_migratable() into qdev.c
  migration: Move postcopy stuff to postcopy-ram.c
  migration: Move page_cache.c to migration/
  migration: Create migration/blocker.h
  ram: Rename RAM_SAVE_FLAG_COMPRESS to RAM_SAVE_FLAG_ZERO
  migration: Pass Error ** argument to {save,load}_vmstate
  migration: Fix regression with compression threads

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'mst/tags/for_upstream' into staging

pci, virtio, vhost: fixes

A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 May 2017 10:42:06 PM BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* mst/tags/for_upstream:
  exec: abstract address_space_do_translate()
  pci: deassert intx when pci device unrealize
  virtio: allow broken device to notify guest
  Revert "hw/pci: disable pci-bridge's shpc by default"
  acpi-defs: clean up open brace usage
  ACPI: don't call acpi_pcihp_device_plug_cb on xen
  iommu: Don't crash if machine is not PC_MACHINE
  pc: add 2.10 machine type
  pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot
  libvhost-user: fix crash when rings aren't ready
  hw/virtio: fix vhost user fails to startup when MQ
  hw/arm/virt: generate 64-bit addressable ACPI objects
  hw/acpi-defs: replace leading X with x_ in FADT field names

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

exec: abstract address_space_do_translate()

This function is an abstraction helper for address_space_translate() and
address_space_get_iotlb_entry(). It does the lookup of address into
memory region section, then does proper IOMMU translation if necessary.
Refactor the two existing functions to use it.

This fixes vhost when IOMMU is disabled by guest.

Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pci: deassert intx when pci device unrealize

If a pci device is not reset by VM (by writing into config space)
and unplugged by VM, after that when VM reboots, qemu may assert:
pcibus_reset: Assertion `bus->irq_count[i] == 0' failed

Cc: qemu-stable@nongnu.org
Signed-off-by: herongguang <herongguang.he@huawei.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: allow broken device to notify guest

According to section 2.1.2 of the virtio-1 specification:

"The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that
a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET,
the device MUST send a device configuration change notification to the
driver."

Commit "f5ed36635d8f virtio: stop virtqueue processing if device is broken"
introduced a virtio_error() call that just does that:

- internally mark the device as broken
- set the DEVICE_NEEDS_RESET bit in the status
- send a configuration change notification

Unfortunately, virtio_notify_vector(), called by virtio_notify_config(),
returns right away when the device is marked as broken and the notification
isn't sent in this case.

The spec doesn't say whether a broken device can send notifications
in other situations or not. But since the driver isn't supposed to do
anything but to reset the device, it makes sense to keep the check in
virtio_notify_config().

Marking the device as broken AFTER the configuration change notification was
sent is enough to fix the issue.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

Revert "hw/pci: disable pci-bridge's shpc by default"

This reverts commit dc0ae767700c156894e36fab89a745a2dc4173de.

Disabling the shpc controller has an undesired side effect.
The PCI bridge remains with no attached devices at boot time,
and the guest operating systems do not allocate any resources
for it, leaving the bridge unusable. Note that the behaviour
is dictated by the pci bridge specification.

Revert the commit and leave the shpc controller even if is not
actually used by any architecture. Slot 0 remains unusable at boot time.

Keep shpc off for QEMU 2.9 machines.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

ramblock: add new hmp command "info ramblock"

To dump information about ramblocks. It looks like:

(qemu) info ramblock
              Block Name    PSize              Offset               Used              Total
            /objects/mem    2 MiB  0x0000000000000000 0x0000000080000000 0x0000000080000000
                vga.vram    4 KiB  0x0000000080060000 0x0000000001000000 0x0000000001000000
    /rom@etc/acpi/tables    4 KiB  0x00000000810b0000 0x0000000000020000 0x0000000000200000
                 pc.bios    4 KiB  0x0000000080000000 0x0000000000040000 0x0000000000040000
  0000:00:03.0/e1000.rom    4 KiB  0x0000000081070000 0x0000000000040000 0x0000000000040000
                  pc.rom    4 KiB  0x0000000080040000 0x0000000000020000 0x0000000000020000
    0000:00:02.0/vga.rom    4 KiB  0x0000000081060000 0x0000000000010000 0x0000000000010000
   /rom@etc/table-loader    4 KiB  0x00000000812b0000 0x0000000000001000 0x0000000000001000
      /rom@etc/acpi/rsdp    4 KiB  0x00000000812b1000 0x0000000000001000 0x0000000000001000

Ramblock is something hidden internally in QEMU implementation, and this
command should only be used by mostly QEMU developers on RAM stuff. It
is not a command suitable for QMP interface. So only HMP interface is
provided for it.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

utils: provide size_to_str()

Moving the algorithm from print_type_size() into size_to_str() so that
other component can also leverage it. With that, refactor
print_type_size().

The assert() in that logic is removed though, since even UINT64_MAX
would not overflow.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-3-git-send-email-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

ramblock: add RAMBLOCK_FOREACH()

So that it can simplifies the iterators.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging

x86 and machine queue, 2017-05-17

# gpg: Signature made Wed 17 May 2017 02:37:54 PM BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* ehabkost/tags/x86-and-machine-pull-request: (22 commits)
  tests: Add [+-]feature and feature=on|off test cases
  s390-pcibus: No need to set user_creatable=false explicitly
  xen-sysdev: Remove user_creatable flag
  virtio-mmio: Remove user_creatable flag
  sysbus-ohci: Remove user_creatable flag
  hpet: Remove user_creatable flag
  generic-sdhci: Remove user_creatable flag
  esp: Remove user_creatable flag
  fw_cfg: Remove user_creatable flag
  unimplemented-device: Remove user_creatable flag
  isabus-bridge: Remove user_creatable flag
  allwinner-ahci: Remove user_creatable flag
  sysbus-ahci: Remove user_creatable flag
  kvmvapic: Remove user_creatable flag
  ioapic: Remove user_creatable flag
  kvmclock: Remove user_creatable flag
  pflash_cfi01: Remove user_creatable flag
  fdc: Remove user_creatable flag from sysbus-fdc & SUNW,fdtwo
  iommu: Remove FIXME comment about user_creatable=true
  xen-backend: Remove FIXME comment about user_creatable flag
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

tests: Add [+-]feature and feature=on|off test cases

Add test code to ensure features are enabled/disabled correctly in the
command-line. The test case use the "feature-words" and
"filtered-features" properties to check if the features were
enabled/disabled correctly.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170508183205.10884-1-ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

s390-pcibus: No need to set user_creatable=false explicitly

TYPE_S390_PCI_HOST_BRIDGE is a subclass of TYPE_PCI_HOST_BRIDGE,
which is a subclass of TYPE_SYS_BUS_DEVICE. TYPE_SYS_BUS_DEVICE
already sets user_creatable=false, so we don't require an
explicit user_creatable=false assignment in
s390_pcihost_class_init().

Cc: Alexander Graf <agraf@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Frank Blaschka <frank.blaschka@de.ibm.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Pierre Morel <pmorel@linux.vnet.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-22-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

xen-sysdev: Remove user_creatable flag

TYPE_XENSYSDEV is only used internally by xen_be_init(), and is
not supposed to be plugged/unplugged dynamically. Remove the
user_creatable flag from the device class.

Cc: Juergen Gross <jgross@suse.com>,
Cc: Peter Maydell <peter.maydell@linaro.org>,
Cc: Thomas Huth <thuth@redhat.com>
Cc: sstabellini@kernel.org
Cc: Markus Armbruster <armbru@redhat.com>,
Cc: Marcel Apfelbaum <marcel@redhat.com>,
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-21-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

virtio-mmio: Remove user_creatable flag

virtio-mmio needs to be wired and mapped by other device or board
code, and won't work with -device. Remove the user_creatable flag
from the device class.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-20-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

sysbus-ohci: Remove user_creatable flag

sysbus-ohci needs to be mapped and wired by device or board code,
and won't work with -device. Remove the user_creatable flag from
the device class.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-19-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

hpet: Remove user_creatable flag

hpet needs to be mapped and wired by the board code and won't
work with -device. Remove the user_creatable flag from the device
class.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-18-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

generic-sdhci: Remove user_creatable flag

generic-sdhci needs to be wired by other devices' code, so it
can't be used with -device. Remove the user_creatable flag from
the device class.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-17-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

esp: Remove user_creatable flag

esp devices aren't going to work with -device, as they need IRQs
to be connected and mmio to be mapped (this is done by
esp_init()). Remove the user_creatable flag from the device
class.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

fw_cfg: Remove user_creatable flag

fw_cfg won't work with -device, as:
* fw_cfg_init1() won't get called for the device;
* The device won't appear at /machine/fw_cfg, and won't work with
  the -fw_cfg command-line option.

Remove the user_creatable flag from the device class.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-15-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

unimplemented-device: Remove user_creatable flag

unimplemented-device needs to be created and mapped using
create_unimplemented_device() (or equivalent code), and won't
work with -device. Remove the user_creatable flag from the device
class.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

isabus-bridge: Remove user_creatable flag

isabus-bridge needs to be created by isa_bus_new(), and won't
work with -device, as it won't create the TYPE_ISA_BUS bus
itself. Remove the user_creatable flag from the device class.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-13-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

allwinner-ahci: Remove user_creatable flag

allwinner-ahci needs its IRQ to be connected and mmio to be
mapped (this is done by the alwinner-a10 device realize method),
and won't work with -device. Remove the user_creatable flag from
the device class.

Cc: John Snow <jsnow@redhat.com>
Cc: qemu-block@nongnu.org
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Cc: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-12-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

sysbus-ahci: Remove user_creatable flag

The sysbus-ahci devices are supposed to be created and wired by
code from other devices, like calxeda_init() and
xlnx_zynqmp_realize(), and won't work with -device. Remove the
user_creatable flag from the device class.

Cc: John Snow <jsnow@redhat.com>
Cc: qemu-block@nongnu.org
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

kvmvapic: Remove user_creatable flag

The kvmvapic device is only usable when created by
apic_common_realize(), not using -device. Remove the
user_creatable flag from the device class.

Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-10-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

ioapic: Remove user_creatable flag

An ioapic device is already created by the q35 initialization
code, and using "-device ioapic" or "-device kvm-ioapic" will
always fail with "Only 1 ioapics allowed". Remove the
user_creatable flag from the ioapic device classes.

Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-9-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

kvmclock: Remove user_creatable flag

kvmclock should be used by guests only when the appropriate CPUID
feature flags are set on the VCPU, and it is automatically
created by kvmclock_create() when those feature flags are set.
This means creating a kvmclock device using -device is useless.
Remove user_creatable from its device class.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-8-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

pflash_cfi01: Remove user_creatable flag

TYPE_CFI_PFLASH01 devices need to be mapped by
pflash_cfi01_register() (or equivalent) and can't be used with
-device. Remove user_creatable from the device class.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-7-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

fdc: Remove user_creatable flag from sysbus-fdc & SUNW,fdtwo

sysbus-fdc and SUNW,fdtwo devices need IRQs to be wired and mmio
to be mapped, and can't be used with -device. Unset
user_creatable on their device classes.

Cc: John Snow <jsnow@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>