virtio-blk: make some functions static

Some functions that were called from the dataplane code are now only used
locally:

virtio_blk_init_request()
virtio_blk_handle_request()
virtio_blk_submit_multireq()

since commit "03de2f527499 virtio-blk: do not use vring in dataplane", and

virtio_blk_free_request()

since commit "6aa46d8ff1ee virtio: move VirtQueueElement at the beginning
of the structs".

This patch converts them to static.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-9p: add parentheses to sizeof operator

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-serial: add missing virtio_detach_element() call

Ports enter a "throttled" state when writing to the chardev would block.
The current output VirtQueueElement is kept around until the chardev
becomes writable again.

There are several places in the virtio-serial lifecycle where the
VirtQueueElement should be thrown away.  For example, if the virtio
device is reset then virtqueue elements are no longer valid.

This patch adds the discard_throttle_data() function to unmap the
scatter-gather list and decrement vq->inuse.  This ensures that the
VirtQueueElement is freed properly.

Cc: amit.shah@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-blk: add missing virtio_detach_element() call

Make sure to unmap the scatter-gather list and decrement vq->inuse
before freeing requests in virtio_blk_reset().

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: add virtio_detach_element()

During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.

Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset.  Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests: acpi tables expected blobs update

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests: acpi: extend cphp testcase with numa check

so it would be possible to verify _PXM generation in
DSDT and SRAT tables.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: provide _PXM method for CPU devices if QEMU is started numa enabled

Workaround for long standing issue where Linux kernel
assigns hotplugged CPU to 1st numa node as it discards
proximity for possible CPUs from SRAT after it's parsed.

_PXM method allows linux query proximity directly from
hotplugged CPU object, which allows Linux to assing CPU
to the correct numa node.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

numa: reduce code duplication by adding helper numa_get_node_for_cpu()

Replace repeated pattern

    for (i = 0; i < nb_numa_nodes; i++) {
        if (test_bit(idx, numa_info[i].node_cpu)) {
           ...
           break;

with a helper function to lookup numa node index for cpu.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-serial: enable virtio console emergency write feature

Add support for enabling the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced
the plumbing required for this; now we expose the virtio feature to
the guest. The feature is disabled for compatibility machines to avoid
exposing a new feature to existing guests.

As required by the virtio 1.0 spec, the emergency write functionality
is available to the guest even if the guest doesn't negotatiate the
feature, as well as before feature negotation.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-serial: add plumbing for virtio console emergency write support

Add the infrastructure required for the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the
size of the configuration area, guests will not be able to actually
make use of this without further patches.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-balloon: Remove needless precompiled directive

Since there in wrapper around madvise(), the virtio-balloon
code is able to work without the precompiled directive, the
directive can be removed.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewd-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

bsd-user: fix FreeBSD build after d148d90e

Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1475611369-74971-1-git-send-email-emaste@freebsd.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161006' into staging

ppc patch queue 2016-10-06

Currently accumulated target-ppc and spapr machine related patches.
  - More POWER9 instruction implementations
  - Additional test case / enabling of test cases for Power
  - Assorted fixes

# gpg: Signature made Thu 06 Oct 2016 07:05:07 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.8-20161006: (29 commits)
  hw/ppc/spapr: Use POWER8 by default for the pseries-2.8 machine
  tests/pxe: Use -nodefaults to speed up ppc64/ipv6 pxe test
  spapr: fix check of cpu alias name in spapr_get_cpu_core_type()
  tests: enable ohci/uhci/xhci tests on PPC64
  libqos: use generic qtest_shutdown()
  libqos: add PCI management in qtest_vboot()/qtest_shutdown()
  libqos: add PPC64 PCI support
  target-ppc: fix vmx instruction type/type2
  target-ppc/kvm: Enable transactional memory on POWER8 with KVM-HV, too
  target-ppc/kvm: Add a wrapper function to check for KVM-PR
  MAINTAINERS: Add two more ppc related files
  target-ppc: Implement mtvsrws instruction
  target-ppc: add vclzlsbb/vctzlsbb instructions
  target-ppc: add vector compare not equal instructions
  target-ppc: fix invalid mask - cmpl, bctar
  target-ppc: add stxvb16x instruction
  target-ppc: add lxvb16x instruction
  target-ppc: add stxvh8x instruction
  target-ppc: add lxvh8x instruction
  target-ppc: improve stxvw4x implementation
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

rules.mak: quiet-command: Split command name and args to print

The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
"  NAME   some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.

Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.

In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).

Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)

A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org

hw/ppc/spapr: Use POWER8 by default for the pseries-2.8 machine

A couple of distributors are compiling their distributions
with "-mcpu=power8" for ppc64le these days, so the user sooner
or later runs into a crash there when not explicitely specifying
the "-cpu POWER8" option to QEMU (which is currently using POWER7
for the "pseries" machine by default). Due to this reason, the
linux-user target already switched to POWER8 a while ago (see commit
de3f1b98410e0d5b406a0df3a48547b559d18602). Since the softmmu target
of course has the same problem, we should switch there to POWER8 for
the newer machine types, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

tests/pxe: Use -nodefaults to speed up ppc64/ipv6 pxe test

SLOF is unfortunately quite slow when running with TCG, so
the pxe test is also performing rather slow here. By using
"-nodefaults" we can disable some devices (vscsi) that we
are not interested in here, so that SLOF does not have to
scan them during boot and thus starts up a little bit faster.
The ppc64 pxe-test now only takes 27 seconds on my laptop
instead of 33 seconds.
The "-nodefaults" flag seems to work fine for the x86 tests,
too, so it is added here unconditionally here (though there
is no speed-up on x86 by using this flag).

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr: fix check of cpu alias name in spapr_get_cpu_core_type()

If the user passes an alias name and a property to -cpu, QEMU fails to
find the CPU definition and exits.

$ qemu-system-ppc64 -cpu POWER8E,compat=power7
qemu-system-ppc64: Unable to find sPAPR CPU Core definition

This happens because spapr_get_cpu_core_type() passes the full string from
the command line (i.e. "POWER8E,compat=power7") to ppc_cpu_lookup_alias(),
instead of the alias name piece only (i.e. "POWER8E").

The fix is to pass model_pieces[0] to ppc_cpu_lookup_alias().

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

tests: enable ohci/uhci/xhci tests on PPC64

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

libqos: use generic qtest_shutdown()

Machine specific shutdown function can be registered by
the machine specific qtest_XXX_boot() if needed.

So we will not have to test twice the architecture (on boot and on
shutdown) if the test can be run on several architectures.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

libqos: add PCI management in qtest_vboot()/qtest_shutdown()

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

libqos: add PPC64 PCI support

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
[dwg: Fixed build problem on 32-bit hosts]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: fix vmx instruction type/type2

A few of the new instructions added inadvertently changed the type of
old instruction(PPC_ALTIVEC) to PPC2_ALTIVEC_207 in the dual form
declaration.

commit: b5d569a1 (target-ppc: add vector extract instructions)
commit: e7b1e06f (target-ppc: add vector insert instructions)
commit: 3aa56a19 (target-ppc: add vector compare not equal instructions)

New ISA 3.0 instructions added:
    vextractub     PPC_NONE     PPC2_ISA300
    vextractuh     PPC_NONE     PPC2_ISA300
    vextractuw     PPC_NONE     PPC2_ISA300
    vinsertb       PPC_NONE     PPC2_ISA300
    vinserth       PPC_NONE     PPC2_ISA300
    vinsertw       PPC_NONE     PPC2_ISA300
    vcmpneb        PPC_NONE     PPC2_ISA300
    vcmpneh        PPC_NONE     PPC2_ISA300
    vcmpnew        PPC_NONE     PPC2_ISA300

Affected older instructions:
    vspltb         PPC_ALTIVEC  PPC_NONE
    vsplth         PPC_ALTIVEC  PPC_NONE
    vspltw         PPC_ALTIVEC  PPC_NONE
    vspltisb       PPC_ALTIVEC  PPC_NONE
    vspltish       PPC_ALTIVEC  PPC_NONE
    vspltisw       PPC_ALTIVEC  PPC_NONE
    vcmpequb       PPC_ALTIVEC  PPC_NONE
    vcmpequh       PPC_ALTIVEC  PPC_NONE
    vcmpequw       PPC_ALTIVEC  PPC_NONE

Change the instruction type/type2 for the older instructions back to
what it was(PPC_ALTIVEC).

CC: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc/kvm: Enable transactional memory on POWER8 with KVM-HV, too

Transactional memory is also supported on POWER8 KVM-HV if the
KVM_CAP_PPC_HTM is not available in the kernel yet, so add a hack
to allow TM here, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc/kvm: Add a wrapper function to check for KVM-PR

It makes more sense if we have a proper function to check
for KVM-PR than to check for the GET_PVINFO extension all
over the place.

Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Expanded a comment to discourage overuse of this function]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

MAINTAINERS: Add two more ppc related files

The file hw/intc/heathrow_pic.c belongs to the Old World Mac
machine, and pc-bios/ppc_rom.bin belongs to the PReP machine.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: Implement mtvsrws instruction

mtvsrws: Move To VSR Word & Splat

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: add vclzlsbb/vctzlsbb instructions

The following vector instructions are added from ISA 3.0.

vclzlsbb - Vector Count Leading Zero Least-Significant Bits Byte
vctzlsbb - Vector Count Trailing Zero Least-Significant Bits Byte

Signed-off-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: add vector compare not equal instructions

The following vector compare not equal instructions are added from ISA 3.0.

vcmpneb - Vector Compare Not Equal Byte
vcmpneh - Vector Compare Not Equal Halfword
vcmpnew - Vector Compare Not Equal Word

Signed-off-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: fix invalid mask - cmpl, bctar

cmpl:  invalid bit mask should be 0x00400001
bctar: invalid bit mask should be 0x0000E000

Signed-off-by: Avinesh Kumar <avinesku@linux.vnet.ibm.com>
Signed-off-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: add stxvb16x instruction

stxvb16x: Store VSX Vector Byte*16

Vector (8-bit elements):
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Store results in following:

Little/Big-endian Storage
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: add lxvb16x instruction

lxvb16x: Load VSX Vector Byte*16

Little/Big-endian Storage
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Vector load results in (8-bit elements):
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|F0|F1|F2|F3|F4|F5|F6|F7|E0|E1|E2|E3|E4|E5|E6|E7|
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: add stxvh8x instruction

stxvh8x:  Store VSX Vector Halfword*8

Vector (16-bit elements):
+------+------+------+------+------+------+------+------+
| 0001 | 1011 | 2021 | 3031 | 4041 | 5051 | 6061 | 7071 |
+------+------+------+------+------+------+------+------+

Store results in following:

Big-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 00 01 | 10 11 | 20 21 | 30 31 | 40 41 | 50 51 | 60 61 | 70 71 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Little-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 01 00 | 11 10 | 21 20 | 31 30 | 41 40 | 51 50 | 61 60 | 71 70 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[dwg: Tweak commit description]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: add lxvh8x instruction

lxvh8x:  Load VSX Vector Halfword*8

Big-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 00 01 | 10 11 | 20 21 | 30 31 | 40 41 | 50 51 | 60 61 | 70 71 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Little-Endian Storage
+-------+-------+-------+-------+-------+-------+-------+-------+
| 01 00 | 11 10 | 21 20 | 31 30 | 41 40 | 51 50 | 61 60 | 71 70 |
+-------+-------+-------+-------+-------+-------+-------+-------+

Vector load results in (16-bit elements):
+------+------+------+------+------+------+------+------+
| 0001 | 1011 | 2021 | 3031 | 4041 | 5051 | 6061 | 7071 |
+------+------+------+------+------+------+------+------+

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[dwg: Tweak to commit description]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: improve stxvw4x implementation

Manipulate data and store 8bytes instead of 4bytes.

Vector (32-bit elements):
+----------+----------+----------+----------+
| 00112233 | 44556677 | 8899AABB | CCDDEEFF |
+----------+----------+----------+----------+

Store results in following:

Big-Endian Storage
+-------------+-------------+-------------+-------------+
| 00 11 22 33 | 44 55 66 77 | 88 99 AA BB | CC DD EE FF |
+-------------+-------------+-------------+-------------+

Little-Endian Storage
+-------------+-------------+-------------+-------------+
| 33 22 11 00 | 77 66 55 44 | BB AA 99 88 | FF EE DD CC |
+-------------+-------------+-------------+-------------+

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: improve lxvw4x implementation

Load 8byte at a time and manipulate.

Big-Endian Storage
+-------------+-------------+-------------+-------------+
| 00 11 22 33 | 44 55 66 77 | 88 99 AA BB | CC DD EE FF |
+-------------+-------------+-------------+-------------+

Little-Endian Storage
+-------------+-------------+-------------+-------------+
| 33 22 11 00 | 77 66 55 44 | BB AA 99 88 | FF EE DD CC |
+-------------+-------------+-------------+-------------+

Vector load results in (32-bit elements):
+----------+----------+----------+----------+
| 00112233 | 44556677 | 8899AABB | CCDDEEFF |
+----------+----------+----------+----------+

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[dwg: Slight tweak to commit description]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: Implement mtvsrdd instruction

mtvsrdd: Move To VSR Double Doubleword

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: Implement mfvsrld instruction

mfvsrld: Move From VSR Lower Doubleword

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Check the availability of transactional memory

KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

hw/ppc/spapr: Fix the selection of the processor features

The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

hw/ppc/spapr: Move code related to "ibm,pa-features" to a separate function

The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

pseries: Add 2.8 machine type, set up compatibility macros

Now that 2.7 is released, create the pseries-2.8 machine type and add the
boilerplate compatiblity macro stuff.  There's nothing new to put into the
2.7 compatiliby properties yet, but we'll need something eventually, so
we might as well get it ready now.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

tests: Test IPv6 and ppc64 in the PXE tester

The firmware of the pseries machine, SLOF, is able to load files via
IPv6 networking, too. So to test both, network bootloading on ppc64
and IPv6 (via Slirp) , let's add some PXE tests for this environment,
too. Since we can not use the normal x86 boot sector for network boot
loading, we use a simple Forth script on ppc64 instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr_vscsi: fix build error introduced by f19661c8

A typo introduced in f19661c8 prevents qemu from building when configured
with --enable-trace-backend=dtrace.

Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20161004' into staging

HMP pull

Just Wanpeng's pull request this time, but
this pull is as much about me checking out my
process.

# gpg: Signature made Tue 04 Oct 2016 18:24:10 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-hmp-20161004:
  hmp: fix qemu crash due to ioapic state dump w/ split irqchip

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hmp: fix qemu crash due to ioapic state dump w/ split irqchip

The qemu will crash when info ioapic through hmp if irqchip
is split. Below message is splat:

KVM_GET_IRQCHIP failed: Unknown error -6

This patch fix it by dumping the ioapic state from the qemu
emulated ioapic if irqchip is split.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1474602456-3232-1-git-send-email-wanpeng.li@hotmail.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20160923090824.GF15411@pxdev.xzpeter.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Thu 29 Sep 2016 14:11:30 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  oslib-posix: add a configure switch to debug stack usage
  coroutine-sigaltstack: use helper for allocating stack memory
  coroutine-ucontext: use helper for allocating stack memory
  coroutine: add a macro for the coroutine stack size
  coroutine-sigaltstack: rename coroutine struct appropriately
  oslib-posix: add helpers for stack alloc and free
  block: Remove qemu_root_bds_opts
  block: Move 'discard' option to bdrv_open_common()
  block: Use 'detect-zeroes' option for 'blockdev-change-medium'
  block: Parse 'detect-zeroes' in bdrv_open_common()
  block/qapi: Move 'aio' option to file driver
  block/qapi: Use separate options type for curl driver
  block: Drop aio/cache consistency check from qmp_blockdev_add()
  block: Fix error path in qmp_blockdev_change_medium()
  block-backend: remove blk_flush_all
  qemu: use bdrv_flush_all for vm_stop et al
  block: reintroduce bdrv_flush_all

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20161004' into staging

target-arm queue:
 * Netduino 2 improvements (SPI, ADC devices)
 * fix some Mainstone key mappings
 * vmstateify tsc210x, tsc2005
 * virt: add 2.8 machine type
 * virt: support in-kernel GICv3 ITS
 * generic-loader device
 * A64: fix iss_sf decoding in disas_ld_lit
 * correctly handle 'sub pc, pc, 1' for ARMv6

# gpg: Signature made Tue 04 Oct 2016 13:41:34 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20161004: (27 commits)
  target-arm: Correctly handle 'sub pc, pc, 1' for ARMv6
  target-arm: A64: Fix decoding of iss_sf in disas_ld_lit
  cadence_gem: Fix priority queue out of bounds access
  docs: Add a generic loader explanation document
  generic-loader: Add a generic loader
  ARM: Virt: ACPI: Add GIC ITS description in ACPI MADT table
  ACPI: Add GIC Interrupt Translation Service Structure definition
  arm/virt: Add ITS to the virt board
  hw/intc/arm_gicv3_its: Implement support for in-kernel ITS emulation
  kvm-all: Pass requester ID to MSI routing functions
  target-arm: move gicv3_class_name from machine to kvm_arm.h
  hw/intc/arm_gicv3_its: Implement ITS base class
  hw/intc/arm_gic(v3)_kvm: Initialize gsi routing
  hw/arm/virt: add 2.8 machine type
  vmstateify tsc210x
  vmstateify tsc2005
  hw/arm: Fix Integrator/CM initialization
  mainstone: Add mapping for dot, slash and backspace.
  mainstone: Fix incorrect key mapping for Enter key.
  MAINTAINERS: Add Alistair to the maintainers list
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Correctly handle 'sub pc, pc, 1' for ARMv6

In the ARM v6 architecture, 'sub pc, pc, 1' is not an interworking
branch, so the computed new value is written to r15 as a normal
value. The architecture says that in this case, bits [1:0] of
the value written must be ignored if we are in ARM mode (or
bit [0] ignored if in Thumb mode); this is a change from the
ARMv4/v5 specification that behaviour is UNPREDICTABLE.
Use the correct mask on the PC value when doing a non-interworking
store to PC.

A popular library used on RaspberryPi uses this instruction
as part of a trick to determine whether it is running on
ARMv6 or ARMv7, and we were mishandling the sequence.

Fixes bug: https://bugs.launchpad.net/bugs/1625295

Reported-by: <stu.axon@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474380941-4730-1-git-send-email-peter.maydell@linaro.org

target-arm: A64: Fix decoding of iss_sf in disas_ld_lit

Fix the decoding of iss_sf in disas_ld_lit.
The SF (Sixty-Four) field in the ISS (Instruction Specific Syndrome)
is a bit that specifies the width of the register that the
instruction loads to.

If cleared it specifies 32 bits.
If set it specifies 64 bits.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1475230780-8669-1-git-send-email-edgar.iglesias@gmail.com
[PMM: tweaked phrasing per on-list discussion]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

cadence_gem: Fix priority queue out of bounds access

There was an error with some of the register implementation assuming
there are 16 priority queues supported when the IP only supports 8. This
patch corrects the registers to only support 8 queues.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 33bf2d28326d22875602234b8b15cf56fb678333.1474911607.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs: Add a generic loader explanation document

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 9d991a2df990cf55e2630410a5a03ea48930af5d.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

generic-loader: Add a generic loader

Add a generic loader to QEMU which can be used to load images or set
memory values.

Internally inside QEMU this is a device. It is a strange device that
provides no hardware interface but allows QEMU to monkey patch memory
specified when it is created. To be able to do this it has a reset
callback that does the memory operations.

This device allows the user to monkey patch memory. To be able to do
this it needs a backend to manage the datas, the same as other
memory-related devices. In this case as the backend is so trivial we
have merged it with the frontend instead of creating and maintaining a
seperate backend.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 10f2a9dce5e5e11b6c6d959415b0ad6ee22bcba5.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ARM: Virt: ACPI: Add GIC ITS description in ACPI MADT table

If GIC ITS is supported, add description in ACPI MADT table, then guest
could use ITS when booting with ACPI.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-9-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ACPI: Add GIC Interrupt Translation Service Structure definition

ACPI Spec 6.0 introduces GIC Interrupt Translation Service Structure.
Here we add the definition of the Structure.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-8-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm/virt: Add ITS to the virt board

If supported by the configuration, ITS will be added automatically.

This patch also renames v2m_phandle to msi_phandle because it's now used
by both MSI implementations.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-7-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3_its: Implement support for in-kernel ITS emulation

The ITS control frame is in-kernel emulated while accesses to the
GITS_TRANSLATER are mediated through the KVM_SIGNAL_MSI ioctl (MSI
direct MSI injection advertised by the CAP_SIGNAL_MSI capability)

the kvm_gsi_direct_mapping is explicitly set to false to emphasize the
difference with GICv2M. Direct mapping cannot work with ITS since
the content of the MSI data is not the target interrupt ID but an
eventd id.

GSI routing is advertised (kvm_gsi_routing_allowed) as well as
msi/irqfd signaling (kvm_msi_via_irqfd_allowed).

The MSI frame (GITS_TRANSLATER) absolute GPA is computed on first
kvm_its_send_msi() call. It is then passed through KVM_SIGNAL_MSI
ioctl.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-6-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

kvm-all: Pass requester ID to MSI routing functions

Introduce global kvm_msi_use_devid flag plus associated
kvm_msi_devid_required() macro. Passes the device ID,
if needed, while building the MSI route entry. Device IDs are
required by the ARM GICv3 ITS (IRQ remapping function is based on
this information).

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-5-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: move gicv3_class_name from machine to kvm_arm.h

Machine.c contains code related to migration. Let's move
gicv3_class_name to kvm_arm.h instead.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-4-git-send-email-eric.auger@redhat.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3_its: Implement ITS base class

This is the basic skeleton for both KVM and software-emulated ITS.
Since we already prepare status structure, we also introduce complete
VMState description. But, because we currently have no migratable
implementations, we also set unmigratable flag.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gic(v3)_kvm: Initialize gsi routing

Advertise gsi routing and set up irqchip routing entries for
GIC SPIs.

This is not mandated as long as MSI routing is not used
(because the kernel sets a default irqchip routing table).
However once MSI routing gets used (for VIRTIO-PCI vhost for
example), the first call to KVM_SET_GSI_ROUTING overrides the
kernel default irqchip table.

If no routing entry exists for the GSI, any IRQFD signaling for
this GSI will fail.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/virt: add 2.8 machine type

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1474641676-25017-1-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

vmstateify tsc210x

I'm now saving all 3 of the pll entries; only 2 were saved before.
There are a couple of times that were previously stored as offsets
from 'now' calculated before saving;  with vmstate it's easier
to store the 'now' and fix it up on reload.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1474977735-10156-3-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

vmstateify tsc2005

I've converted the fields in it's main data structure
to fixed size types in ways that look sane.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1474977735-10156-2-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: Fix Integrator/CM initialization

Initialization of a class instance cannot depend on its own properties
as these are not yet set.  Move parts of integratorcm_init() that depend
on the "memsz" property to the newly added integratorcm_realize().

This fixes: https://bugs.launchpad.net/qemu/+bug/1624726

Signed-off-by: Jakub Jermar <jakub@jermar.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

mainstone: Add mapping for dot, slash and backspace.

Add missed out mappings. These mappings are from the "Intel PXA27x
Processor Developer's Kit User Guide".

Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475063033-8176-3-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

mainstone: Fix incorrect key mapping for Enter key.

According to the manual the (5, 5) corresponds to backspace key, and
not Enter key. Linux kernel maps (5, 4) to the enter key. Fixing it up
to match the mapping in the Linux kernel.

Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475063033-8176-2-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: Add Alistair to the maintainers list

Add Alistair Francis as the maintainer for the Netduino 2
and SMM32F205 SoC.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a46ccf398b050a41cc3b3d0e94bcff4ce2d85e0.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

STM32F205: Connect the SPI devices

Connect the SPI devices to the STM32F205 SoC.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d05849120420f8db0d9aa053bd23134c33cd9180.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

STM32F205: Connect the ADC devices

Connect the ADC devices to the STM32F205 SoC.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Message-id: 6214eda399da7b47014f6f895be25323d52dbc9e.1474742262.git.alistair@alistair23.me
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

irq: Add a new irq device that allows the ORing of lines

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Message-id: 52e5d361e3b5a0ea8554aca73ee65ae2b586112e.1474742262.git.alistair@alistair23.me
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

STM32F2xx: Add the SPI device

Add the STM32F2xx SPI device.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8197811d5c94f814fa67c6a33ca2f7fd0aa97432.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

STM32F2xx: Add the ADC device

Add the STM32F2xx ADC device. This device randomly
generates values on each read.

This also includes creating a hw/adc directory.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

STM32F2xx: Display PWM duty cycle from timer

If correctly configured allow the STM32F2xx timer to print
out the PWM duty cycle information.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: cdb59039a25e061615713a94b40797baa12ea9f9.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

STM32F205: Remove the individual device variables

Cleanup the individual DeviceState and SysBusDevice
variables to re-use the same variable for each
device.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fc5d75a57d320b69704df2c1146ff0fd482e4a88.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging

x86 bug fixes

Fix for a XSAVE regression when using "-cpu host", and a fix on
the Opteron_G3 CPU model.

# gpg: Signature made Mon 03 Oct 2016 20:08:13 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: Correct family/model/stepping for Opteron_G3
  target-i386: Report known CPUID[EAX=0xD,ECX=0]:EAX bits as migratable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into staging

# gpg: Signature made Sun 02 Oct 2016 02:49:58 BST
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/for-upstream:
  docker: Build in a clean directory
  smbios: fix uuid copy
  xenpv: Fix qemu_uuid compiling error

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-i386: Correct family/model/stepping for Opteron_G3

Current CPU definition for AMD Opteron third generation includes
features like SSE4a and LAHF_LM support in emulated CPUID. These
features are present in K8 rev.E or K10 CPUs and later. However,
current G3 family and model describe 2nd generation K8 cores instead.

This is incorrect but was considered harmless until our tests found a
problem with linux kernels >= 3.10 (and maybe earlier) which specifically
check for Opteron K8 model when parsing CPUID leaf 0x80000001:
http://lxr.free-electrons.com/source/arch/x86/kernel/cpu/amd.c?v=3.16#L552
This code will disable LAHF_LM feature in /proc/cpuinfo if model number
is inconsistent.

This change sets Opteron_G3 family/model/stepping to 16/2/3 which is
a proper Opteron 3rd generation 2350 CPU.

Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

target-i386: Report known CPUID[EAX=0xD,ECX=0]:EAX bits as migratable

A regression was introduced by commit 96193c22a "target-i386:
Move xsave component mask to features array": all
CPUID[EAX=0xD,ECX=0]:EAX bits were being reported as unmigratable
because they don't have feature names defined. This broke
"-cpu host" because it enables only migratable features by
default.

This adds a new field to FeatureWordInfo: migratable_flags, which
will make those features be reported as migratable even if they
don't have a property name defined.

Reported-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Paolo Bonzini <bonzini@gnu.org>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

docker: Build in a clean directory

Currently we configure and build under "$QEMU_SRC/tests/docker" which is
dubious. Create a fixed directory (to be friendly to ccache) and change
to there before calling build_qemu.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1475047892-11955-1-git-send-email-famz@redhat.com>

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20160927' into staging

Couple of s390x patches:
- some PCI cleanups
- fix build error due to uuid rework
- fix potential deadlock in sigp handling
- enable ccw devices in BIOS and enforce checking in QEMU

# gpg: Signature made Wed 28 Sep 2016 12:27:03 BST
# gpg:                using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB  FBCA 117B BC80 B5A6 1C7C

* remotes/borntraeger/tags/s390x-20160927:
  s390x/kvm: fix build against qemu_uuid
  s390x/css: {c,h,t,r,x}sch: require enable AND device number valid
  pc-bios/s390-ccw.img: rebuild image
  pc-bios/s390-ccw: enable subchannel for IPL I/O devices
  s390x/kvm: Fix potential deadlock in sigp handling
  s390x/pci: code cleanup
  s390x/pci: assign msix io region for each pci device
  s390x/pci: re-arrange variable declarations

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/yongbok/tags/mips-20160929' into staging

MIPS patches 2016-09-29

Changes:
* MIPS Maintainer update
* vmstateify rc4030

# gpg: Signature made Thu 29 Sep 2016 13:09:09 BST
# gpg:                using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA  2B5C 2238 EB86 D5F7 97C2

* remotes/yongbok/tags/mips-20160929:
  hw/dma: vmstateify rc4030
  MAINTAINERS: update target-mips maintainers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging

# gpg: Signature made Thu 29 Sep 2016 21:13:46 BST
# gpg:                using RSA key 0x7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/ide-pull-request:
  ide: Fix memory leak in ide_register_restart_cb()
  MAINTAINERS: Add some more headers to the IDE section
  ahci: clear aiocb in ncq_cb
  ide: fix DMA register transitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ide: Fix memory leak in ide_register_restart_cb()

Fix a memory leak in ide_register_restart_cb() in hw/ide/core.c and add
idebus_unrealize() in hw/ide/qdev.c to have calls to
qemu_del_vm_change_state_handler() to deal with the dangling change
state handler during hot-unplugging ide devices which might lead to a
crash.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1474995212-10580-1-git-send-email-ashijeetacharya@gmail.com
[Minor whitespace fix --js]
Signed-off-by: John Snow <jsnow@redhat.com>

MAINTAINERS: Add some more headers to the IDE section

The folder include/hw/ide/ belongs to the IDE section.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1474646996-30421-1-git-send-email-thuth@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: clear aiocb in ncq_cb

Similar to existing fixes for IDE (87ac25fd) and ATAPI (7f951b2d), the
AIOCB must be cleared in the callback. Otherwise, we may accidentally
try to reset a dangling pointer in bdrv_aio_cancel() from a port reset.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1474575040-32079-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ide: fix DMA register transitions

ATA8-APT defines the state transitions for both a host controller and
for the hardware device during the lifecycle of a DMA transfer, in
section 9.7 "DMA command protocol."

One of the interesting tidbits here is that when a device transitions
from DDMA0 ("Prepare state") to DDMA1 ("Data_Transfer State"), it can
choose to set either BSY or DRQ to signal this transition, but not both.

as ide_sector_dma_start is the last point in our preparation process
before we begin the real data transfer process (for either AHCI or BMDMA),
this is the correct transition point for DDMA0 to DDMA1.

I have chosen !BSY && DRQ for QEMU to make the transition from DDMA0 the
most obvious.

Reported-by: Benjamin David Lunt <fys@fysnet.net>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1470175541-19344-1-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

oslib-posix: add a configure switch to debug stack usage

this adds a knob to track the maximum stack usage of stacks
created by qemu_alloc_stack.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

coroutine-sigaltstack: use helper for allocating stack memory

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

coroutine-ucontext: use helper for allocating stack memory

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

coroutine: add a macro for the coroutine stack size

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

coroutine-sigaltstack: rename coroutine struct appropriately

The name of the sigaltstack coroutine struct was misleading.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

oslib-posix: add helpers for stack alloc and free

the allocated stack will be adjusted to the minimum supported stack size
by the OS and rounded up to be a multiple of the system pagesize.
Additionally an architecture dependent guard page is added to the stack
to catch stack overflows.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Remove qemu_root_bds_opts

The remaining options in qemu_root_bds_opts (aio and copy-on-read)
aren't used any more, the QAPI schema doesn't contain them. Therefore
all the code processing qemu_root_bds_opts options is dead and can be
removed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

block: Move 'discard' option to bdrv_open_common()

This enables its use for nested child nodes. The compatibility
between the 'discard' and 'detect-zeroes' setting is checked in
bdrv_open_common() now as the former setting isn't available before
calling bdrv_open() any more.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

block: Use 'detect-zeroes' option for 'blockdev-change-medium'

Instead of modifying the new BDS after it has been opened, use the newly
supported 'detect-zeroes' option in bdrv_open_common() so that all
requirements are checked (detect-zeroes=unmap requires discard=unmap).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

block: Parse 'detect-zeroes' in bdrv_open_common()

Amongst others, this means that you can now use the 'detect-zeroes'
option for non-top-level nodes in blockdev-add, like the QAPI schema
promises.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

block/qapi: Move 'aio' option to file driver

The option whether or not to use a native AIO interface really isn't a
generic option for all drivers, but only applies to the native file
protocols. This patch moves the option in blockdev-add to the
appropriate places (raw-posix and raw-win32).

We still have to keep the flag BDRV_O_NATIVE_AIO for compatibility
because so far the AIO option was usually specified on the wrong layer
(the top-level format driver, which didn't even look at it) and then
inherited by the protocol driver (where it was actually used). We can't
forbid this use except in new interfaces.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

block/qapi: Use separate options type for curl driver

We're going to add an option to the file drivers which doesn't apply to
the curl drivers, so give them a separate option type.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

block: Drop aio/cache consistency check from qmp_blockdev_add()

The TODO comment has been addressed a while ago and this is now checked
in raw-posix, so we don't have to special case this in blockdev-add any
more.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>