qemu-img: Resolve relative backing paths in rebase

Currently, rebase interprets a relative path for the new backing image
as follows:
(1) Open the new backing image with the given relative path (thus relative to
    qemu-img's working directory).
(2) Write it directly into the overlay's backing path field (thus
    relative to the overlay).

If the overlay is not in qemu-img's working directory, both will be
different interpretations, which may either lead to an error somewhere
(either rebase fails because it cannot open the new backing image, or
your overlay becomes unusable because its backing path does not point to
a file), or, even worse, it may result in your rebase being performed
for a different backing file than what your overlay will point to after
the rebase.

Fix this by interpreting the target backing path as relative to the
overlay, like qemu-img does everywhere else.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1569835
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509182002.8044-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

iotests: Let 216 make use of qemu-io's exit code

As a showcase of how you can use qemu-io's exit code to determine
success or failure (same for qemu-img), this test is changed to use
qemu_io_silent() instead of qemu_io(), and to assert the exit code
instead of logging the filtered result.

One real advantage of this is that in case of an error, you get a
backtrace that helps you locate the issue in the test file quickly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

iotests.py: Add qemu_io_silent

With qemu-io now returning a useful exit code, some tests may find it
sufficient to just query that instead of logging (and filtering) the
whole output.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-io: Exit with error when a command failed

Currently, qemu-io basically always returns success when it gets to
interactive mode (so once the whole command line has been parsed; even
before the commands on the command line are interpreted).  That is not
very useful.

This patch makes qemu-io return failure when any of the executed
commands failed.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1519617
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-io: Let command functions return error code

This is basically what everything else in the qemu code base does, so we
can do it here, too.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-io: Drop command functions' return values

For qemu-io, a function returns an integer with two possible values: 0
for "qemu-io may continue execution", or 1 for "qemu-io should exit".
However, there is only a single command that returns 1, and that is
"quit".

So let's turn this case into a global variable instead so we can make
better use of the return value in a later patch.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

iotests: Repairing error during snapshot deletion

This adds a test for an I/O error during snapshot deletion, and maybe
more importantly, for how to repair the resulting image.  If the
snapshot has been deleted before the error occurs, the only negative
result will be leaked clusters -- and those should be repairable with
qemu-img check -r leaks.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509200059.31125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qcow2: Repair OFLAG_COPIED when fixing leaks

Repairing OFLAG_COPIED is usually safe because it is done after the
refcounts have been repaired.  Therefore, it we did not find anyone else
referencing a data or L2 cluster, it makes no sense to not set
OFLAG_COPIED -- and the other direction (clearing OFLAG_COPIED) is
always safe, anyway, it may just induce leaks.

Furthermore, if OFLAG_COPIED is actually consistent with a wrong (leaky)
refcount, we will decrement the refcount with -r leaks, but OFLAG_COPIED
will then be wrong.  qemu-img check should not produce images that are
more corrupted afterwards then they were before.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1527085
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509200059.31125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

iotests: Rework 113

This test case has been broken since 398e6ad014df261d (roughly half a
year).  qemu-img amend requires its output image to be R/W, so it opens
it as such; the node is then turned into an read-only node automatically
which is now accompanied by a warning, however.  This warning has not
been part of the reference output.

For one thing, this warning shows that we cannot keep the test case as
it is.  We would need a format that has no create_opts but that does
have write support -- we do not have such a format, though.

Another thing is that qemu now actually checks whether an image format
supports amendment instead of whether it has create_opts (since the
former always implies the latter).  So we can now use any format that
does not support amendment (even if it supports creation) and thus test
the same code path.

The reason nobody has noticed the breakage until now of course is the
fact that nobody runs the iotests for nbd+bochs.  There actually was
never any reason to set the protocol to "nbd" but because that was
technically correct; functionally it made no difference.  So that is the
first thing we are going to change: Make the protocol "file" instead so
that people might actually notice breakage here.

Secondly, now that bochs no longer works for the amend test case, we
have to change the format there anyway.  Set let us just bend the truth
a bit, declare this test a raw test.  In fact, that does not even
concern the bochs test cases, other than the output now reading 'bochs'
instead of 'IMGFMT'.

So with this test now being a raw test, we can rework the amend test
case to use raw instead.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180509210023.20283-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

iotests: Test help option for unsupporting formats

This adds test cases to 082 for qemu-img create/convert/amend "-o help"
on formats that do not support creation or amendment, respectively.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-img: Recognize no creation support in -o help

The only users of print_block_option_help() are qemu-img create and
qemu-img convert for the output image, so this function is always used
for image creation (it used to be used for amendment also, but that is
no longer the case).

So if image creation is not supported by either the format or the
protocol, there is no need to print any option description, because the
user cannot create an image like this anyway.

This also fixes an assertion failure:

    $ qemu-img create -f bochs -o help
    Supported options:
    qemu-img: util/qemu-option.c:219:
    qemu_opts_print_help: Assertion `list' failed.
    [1]    24831 abort (core dumped)  qemu-img create -f bochs -o help

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-img: Add print_amend_option_help()

The more generic print_block_option_help() function is not really
suitable for qemu-img amend, for a couple of reasons:
(1) We do not need to append the protocol-level options, as amendment
    happens only on one node and does not descend downwards to its
    children.
(2) print_block_option_help() says those options are "supported".  For
    option amendment, we do not really know that.  So this new function
    explicitly says that those options are the creation options, and not
    all of them may be supported.
(3) If the driver does not support option amendment, we should not print
    anything (except for an error message that amendment is not
    supported).

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-option: Pull out "Supported options" print

It really is up to the caller to decide what this list of options means.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

block: Add Error parameter to bdrv_amend_options

Looking at the qcow2 code that is riddled with error_report() calls,
this is really how it should have been from the start.

Along the way, turn the target_version/current_version comparisons at
the beginning of qcow2_downgrade() into assertions (the caller has to
make sure these conditions are met), and rephrase the error message on
using compat=1.1 to get refcount widths other than 16 bits.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509210023.20283-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

qemu-img: Amendment support implies create_opts

Instead of checking whether a driver has a non-NULL create_opts we
should check whether it supports image amendment in the first place.  If
it does, it must have create_opts.

On the other hand, if it does not have create_opts (so it does not
support amendment either), the error message "does not support any
options" is a bit useless.  Stating clearly that the driver has no
amendment support whatsoever is probably better.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

iotests: Add creation test to 153

This patch adds a test case to 153 which tries to overwrite an image
(using qemu-img create) while it is in use.  Without the original user
explicitly sharing the necessary permissions (writing and truncation),
this should not be allowed.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180509215336.31304-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

block/file-posix: File locking during creation

When creating a file, we should take the WRITE and RESIZE permissions.
We do not need either for the creation itself, but we do need them for
clearing and resizing it.  So we can take the proper permissions by
replacing O_TRUNC with an explicit truncation to 0, and by taking the
appropriate file locks between those two steps.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509215336.31304-3-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

block/file-posix: Pass FD to locking helpers

raw_apply_lock_bytes() and raw_check_lock_bytes() currently take a
BDRVRawState *, but they only use the lock_fd field.  During image
creation, we do not have a BDRVRawState, but we do have an FD; so if we
want to reuse the functions there, we should modify them to receive only
the FD.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180509215336.31304-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-3.0-pull-request' into staging

Convert to TranslatorOps

I've updated the series to fix conflicts with:

21528149eb target/m68k: Add trailing '\n' to qemu_log() call
07ea28b418 tcg: Pass tb and index to tcg_gen_exit_tb separately

# gpg: Signature made Mon 11 Jun 2018 11:48:52 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-3.0-pull-request:
  target/m68k: Merge disas_m68k_insn into m68k_tr_translate_insn
  target/m68k: Improve ending TB at page boundaries
  target/m68k: Convert to TranslatorOps
  target/m68k: Convert to DisasContextBase
  target/m68k: Rename DISAS_UPDATE and gen_lookup_tb
  target/m68k: Use lookup_and_goto_tb for DISAS_JUMP
  target/m68k: Remove DISAS_JUMP_NEXT as unused
  target/m68k: Replace DISAS_TB_JUMP with DISAS_NORETURN
  target/m68k: Use DISAS_NORETURN for exceptions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/m68k: Merge disas_m68k_insn into m68k_tr_translate_insn

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Improve ending TB at page boundaries

Rather than limit total TB size to PAGE-32 bytes, end the TB when
near the end of a page.  This should provide proper semantics of
SIGSEGV when executing near the end of a page.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Convert to TranslatorOps

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Convert to DisasContextBase

Removed ctx->insn_pc in favour of ctx->base.pc_next.
Yes, it is annoying, but didn't want to waste its 4 bytes.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging

Pull request

# gpg: Signature made Fri 08 Jun 2018 18:46:24 BST
# gpg:                using RSA key 7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/ide-pull-request: (30 commits)
  ide: introduce ide_transfer_start_norecurse
  atapi: call ide_set_irq before ide_transfer_start
  ide: make ide_transfer_stop idempotent
  ide: call ide_cmd_done from ide_transfer_stop
  ide: push end_transfer_func out of start_transfer callback, rename callback
  ahci: move PIO Setup FIS before transfer, fix it for ATAPI commands
  libqos/ahci: track sector size
  MAINTAINERS: Add the cdrom-test to John's section
  tests/cdrom-test: Test that -cdrom parameter is working
  tests/cdrom-test: Test booting from CD-ROM ISO image file
  tests/boot-sector: Add magic bytes to s390x boot code header
  ahci: make ahci_mem_write traces more descriptive
  ahci: delete old host register address definitions
  ahci: adjust ahci_mem_write to work on registers
  ahci: fix spacing damage on ahci_mem_write
  ahci: make mem_read_32 traces more descriptive
  ahci: modify ahci_mem_read_32 to work on register numbers
  ahci: fix host register max address
  ahci: add host register enumeration
  ahci: delete old port register address definitions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/m68k: Rename DISAS_UPDATE and gen_lookup_tb

The name gen_lookup_tb is at odds with tcg_gen_lookup_and_goto_tb.
For these cases, we do indeed want to exit back to the main loop.
Similarly, DISAS_UPDATE performs no actual update, whereas DISAS_EXIT
does what it says.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Use lookup_and_goto_tb for DISAS_JUMP

These are all indirect or out-of-page direct jumps.
We can indirectly chain to the next TB without going
back to the main loop.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Remove DISAS_JUMP_NEXT as unused

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Replace DISAS_TB_JUMP with DISAS_NORETURN

We have exited the TB after using goto_tb; there is no
distinction from DISAS_NORETURN.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: Use DISAS_NORETURN for exceptions

The raise_exception helper does not return.  Do not generate
any code following that.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

ide: introduce ide_transfer_start_norecurse

For the case where the end_transfer_func is also the caller of
ide_transfer_start, the mutual recursion can lead to unlimited
stack usage.  Introduce a new version that can be used to change
tail recursion into a loop, and use it in trace_ide_atapi_cmd_reply_end.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606190955.20845-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

atapi: call ide_set_irq before ide_transfer_start

The ATAPI_INT_REASON_IO interrupt is raised when I/O starts, but in the
AHCI case ide_set_irq was actually called at the end of a mutual recursion.
Move it early, with the side effect that ide_transfer_start becomes a tail
call in ide_atapi_cmd_reply_end.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606190955.20845-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ide: make ide_transfer_stop idempotent

There is code checking s->end_transfer_func and it was not taught about
ide_transfer_cancel.  We can just use ide_transfer_stop because
s->end_transfer_func is only ever called in the DRQ phase.

ide_transfer_cancel can then be removed, since it would just be
calling ide_transfer_halt.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606190955.20845-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ide: call ide_cmd_done from ide_transfer_stop

The code can simply be moved to the sole caller that has notify == true.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606190955.20845-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ide: push end_transfer_func out of start_transfer callback, rename callback

Now that end_transfer_func is a tail call in ahci_start_transfer,
formalize the fact that the callback (of which ahci_start_transfer is
the sole implementation) takes care of the transfer too: rename it to
pio_transfer and, if it is present, call the end_transfer_func as soon
as it returns.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606190955.20845-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: move PIO Setup FIS before transfer, fix it for ATAPI commands

The PIO Setup FIS is written in the PIO:Entry state, which comes before
the ATA and ATAPI data transfer states.  As a result, the PIO Setup FIS
interrupt is now raised before DMA ends for ATAPI commands, and tests have
to be adjusted.

This is also hinted by the description of the command header in the AHCI
specification, where the "A" bit is described as

    When ‘1’, indicates that a PIO setup FIS shall be sent by the device
    indicating a transfer for the ATAPI command.

and also by the description of the ACMD (ATAPI command region):

    The ATAPI command must be either 12 or 16 bytes in length. The length
    transmitted by the HBA is determined by the PIO setup FIS that is sent
    by the device requesting the ATAPI command.

QEMU, which conflates the "generator" and the "receiver" of the FIS into
one device, always uses ATAPI_PACKET_SIZE, aka 12, for the length.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606190955.20845-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

libqos/ahci: track sector size

It's not always 512, and it does wind up mattering for PIO tranfers,
because this means DRQ blocks are four times as big for ATAPI.
Replace an instance of 2048 with the correct define, too.

This patch by itself winds changing no behavior. fis->count is ignored
for CMD_PACKET, and sect_count only gets used in non-ATAPI cases.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606190955.20845-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

MAINTAINERS: Add the cdrom-test to John's section

The cdrom-test checks various block types - IDE, SCSI and
virtio, so it's a little bit hard to decide where this should
belong to in the MAINTAINERS file. But John volunteered to take
it, so let's put it into the IDE section for now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

tests/cdrom-test: Test that -cdrom parameter is working

Commit 1454509726719e0933c800 recently broke the "-cdrom" parameter
on a couple of boards without us noticing it immediately. Thus let's
add a test which checks that "-cdrom" can at least be used to start
QEMU with certain machine types.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-By: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

tests/cdrom-test: Test booting from CD-ROM ISO image file

We already have the code for a boot file in tests/boot-sector.c,
so if the genisoimage program is available, we can easily create
a bootable CD ISO image that we can use for testing whether our
CD-ROM emulation and the BIOS CD-ROM boot works correctly.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-By: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

tests/boot-sector: Add magic bytes to s390x boot code header

We're going to use the s390x boot code for testing CD-ROM booting.
But the ISO loader of the s390-ccw bios is a little bit more picky
than the network loader and expects some magic bytes in the header
of the file (see linux_s390_magic in pc-bios/s390-ccw/bootmap.c), so
we've got to add them in our boot code here, too.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-By: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: make ahci_mem_write traces more descriptive

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-17-jsnow@redhat.com
[Fixed format specifiers. --js]
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: delete old host register address definitions

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: adjust ahci_mem_write to work on registers

Actually, this function looks pretty broken, but for now, let's finish
up what this series of commits came here to do.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: fix spacing damage on ahci_mem_write

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: make mem_read_32 traces more descriptive

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: modify ahci_mem_read_32 to work on register numbers

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: fix host register max address

Yes, comment, it ought to be 0x2C.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: add host register enumeration

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: delete old port register address definitions

They're now unused.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: make port write traces more descriptive

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-8-jsnow@redhat.com
[Changed format specifier. --js]
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: modify ahci_port_write to use register numbers

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: combine identical clauses in port write

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: fix spacing damage on ahci_port_write

Churn.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-5-jsnow@redhat.com
[Fix patchew/checkpatch nit. --js]
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: make port read traces more descriptive

A trace is added to let us watch unimplemented registers specifically,
as these are more likely to cause us trouble. Otherwise, the port read
traces now tell us what register is getting hit, which is nicer.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: modify ahci_port_read to use register numbers

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: add port register enumeration

Instead of tracking offsets, lets count the registers.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: don't schedule unnecessary BH

The comment gives us a hint. *Maybe* we still have something to
process. Well, why not check?

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180531004323.4611-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: fix PxCI register race

Fixes: https://bugs.launchpad.net/qemu/+bug/1769189
AHCI presently signals completion prior to the PxCI register being
cleared to indicate completion. If a guest driver attempts to issue
a new command in its IRQ handler, it might be surprised to learn there
is still a command pending.

In the case of Windows 10's boot driver, it will actually poll the IRQ
register hoping to find out when the command is done running -- which
will never happen, as there isn't a command running.

Fix this: clear PxCI in ahci_cmd_done and not in the asynchronous BH.
Because it now runs synchronously, we don't need to check if the command
is actually done by spying on the ATA registers. We know it's done.

CC: qemu-stable <qemu-stable@nongnu.org>
Reported-by: François Guerraz <kubrick@fgv6.net>
Tested-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180531004323.4611-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

ahci: trim signatures on raise/lower

These functions work on the AHCI device, not the individual
AHCI devices, so trim the AHCIDevice argument.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180531004323.4611-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180608' into staging

target-arm queue:
 * arm_gicv3_kvm: fix migration of registers corresponding to
   IRQs 992 to 1020 in the KVM GIC
 * aspeed: remove ignore_memory_transaction_failures on all boards
 * aspeed: add support for the witherspoon-bmc board
 * aspeed: add an I2C RTC device and EEPROM I2C devices
 * aspeed: add the pc9552 chips to the witherspoon machine
 * ftgmac100: fix various bugs
 * hw/arm: Remove the deprecated xlnx-ep108 machine
 * hw/i2c: Add trace events
 * add missing '\n' on various qemu_log() logging strings
 * sdcard: clean up spec version support so we report the
   right spec version to the guest and only implement the
   commands that are supposed to be present in that version

# gpg: Signature made Fri 08 Jun 2018 13:36:37 BST
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180608: (31 commits)
  sdcard: Disable CMD19/CMD23 for Spec v2
  sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)
  sdcard: Disable SEND_IF_COND (CMD8) for Spec v1
  sdcard: Add a 'spec_version' property, default to Spec v2.00
  sdcard: Allow commands valid in SPI mode
  sdcard: Update the Configuration Register (SCR) to Spec Version 1.10
  target/xtensa: Add trailing '\n' to qemu_log() calls
  RISC-V: Add trailing '\n' to qemu_log() calls
  target/m68k: Add trailing '\n' to qemu_log() call
  target/arm: Add trailing '\n' to qemu_log() calls
  stellaris: Add trailing '\n' to qemu_log() calls
  hw/mips/boston: Add trailing '\n' to qemu_log() calls
  hw/core/register: Add trailing '\n' to qemu_log() call
  ppc/pnv: Add trailing '\n' to qemu_log() calls
  xilinx-dp: Add trailing '\n' to qemu_log() call
  hw/digic: Add trailing '\n' to qemu_log() calls
  hw/sd/milkymist-memcard: Add trailing '\n' to qemu_log() call
  hw/i2c: Add trace events
  hw/arm: Remove the deprecated xlnx-ep108 machine
  ftgmac100: remove check on runt messages
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sdcard: Disable CMD19/CMD23 for Spec v2

These commands got introduced by Spec v3
(see 0c3fb03f7ec and 4481bbc79d2).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sdcard: Disable SEND_IF_COND (CMD8) for Spec v1

CMD8 is "Reserved" in Spec v1.10.

Spec v2.00 introduces the SEND_IF_COND command:

  6.4.1 Power Up

    CMD8 is newly added in the Physical Layer Specification Version
    2.00 to support multiple voltage ranges and used to check whether
    the card supports supplied voltage. The version 2.00 or later host
    shall issue CMD8 and verify voltage before card initialization.
    The host that does not support CMD8 shall supply high voltage range.

Message-Id: 201204252110.20873.paul@codesourcery.com
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sdcard: Add a 'spec_version' property, default to Spec v2.00

As of this commit, the Spec v1 is not working, and all controllers
expect the cards to be conformant to Spec v2.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sdcard: Allow commands valid in SPI mode

From the "Physical Layer Simplified Specification Version 1.10"
  Chapter 7.3 "SPI Mode Transaction Packets"
    Table 57: "Commands and arguments"

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sdcard: Update the Configuration Register (SCR) to Spec Version 1.10

The initial implementation is based on the Specs v1.10 (see a1bb27b1e98).

However the SCR is anouncing the card being v1.01.

The new chapters added in version 1.10 are:

    4.3.10 Switch function command

    Switch function command (CMD6) 1 is used to switch or expand
    memory card functions. [...]
    This is a new feature, introduced in SD physical Layer
    Specification Version 1.10. Therefore, cards that are
    compatible with earlier versions of the spec do not support
    it. The host shall check the "SD_SPEC" field in the SCR
    register to recognize what version of the spec the card
    complies with before using CMD6. It is mandatory for SD
    memory card of Ver1.10 to support CMD6.

    4.3.11 High-Speed mode (25MB/sec interface speed)

    Though the Rev 1.01 SD memory card supports up to 12.5MB/sec
    interface speed, the speed of 25MB/sec is necessary to support
    increasing performance needs of the host and because of memory
    size which continues to grow.
    To achieve 25MB/sec interface speed, clock rate is increased to
    50MHz and CLK/CMD/DAT signal timing and circuit conditions are
    reconsidered and changed from Physical Layer Specification
    Version 1.01.

    4.3.12 Command system (This chapter is newly added in version 1.10)

    SD commands CMD34-37, CMD50, CMD57 are reserved for SD command
    system expansion via the switch command.
    [These commands] will be considered as illegal commands (as
    defined in revision 1.01 of the SD physical layer specification).

The SWITCH_FUNCTION is implemented since the first commit, a1bb27b1e98.

The 25MB/sec High-Speed mode was already updated in d7ecb867529.

The current implementation does not implements CMD34-37, CMD50 and
CMD57, thus these commands already return ILLEGAL.

With this patch, the SCR register now matches the description of the header:

 * SD Memory Card emulation as defined in the "SD Memory Card Physical
 * layer specification, Version 1.10."

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/xtensa: Add trailing '\n' to qemu_log() calls

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 20180606152128.449-12-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

RISC-V: Add trailing '\n' to qemu_log() calls

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-11-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/m68k: Add trailing '\n' to qemu_log() call

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20180606152128.449-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add trailing '\n' to qemu_log() calls

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-9-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

stellaris: Add trailing '\n' to qemu_log() calls

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-8-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/mips/boston: Add trailing '\n' to qemu_log() calls

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/core/register: Add trailing '\n' to qemu_log() call

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180606152128.449-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ppc/pnv: Add trailing '\n' to qemu_log() calls

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20180606152128.449-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

xilinx-dp: Add trailing '\n' to qemu_log() call

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180606152128.449-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/digic: Add trailing '\n' to qemu_log() calls

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/sd/milkymist-memcard: Add trailing '\n' to qemu_log() call

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/i2c: Add trace events

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606191801.6331-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: Remove the deprecated xlnx-ep108 machine

It has been marked as deprecated since QEMU v2.11, so it is time to
remove this now. The xlnx-zcu102 machine is very much the same and
can be used as a replacement instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ftgmac100: remove check on runt messages

This is a ethernet wire limitation not needed in emulation. It breaks
U-Boot n/w stack also.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180530061711.23673-5-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ftgmac100: fix multicast hash routine

Based on the multicast hash calculation of the FTGMAC100 Linux driver.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ftgmac100: add IEEE 802.1Q VLAN support

The ftgmac100 NIC supports VLAN tag insertion and the MAC engine also
has a control to remove VLAN tags from received packets.

The VLAN control bits and VLAN tag information are contained in the
second word of the transmit and receive descriptors. The Insert VLAN
bit and the VLAN Tag available bit are only valid in the first segment
of the packet.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ftgmac100: compute maximum frame size depending on the protocol

The maximum frame size includes the CRC and depends if a VLAN tag is
inserted or not. Adjust the frame size limit in the transmit handler
using on the FTGMAC100State buffer size and in the receive handler use
the packet protocol.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aspeed: add the pc9552 chips to the witherspoon machine

The pca9552 LED blinkers on the Witherspoon machine are used for leds
but also as GPIOs to control fans and GPUs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-8-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

misc: add pca9552 LED blinker model

Specs are available here :

    https://www.nxp.com/docs/en/application-note/AN264.pdf

This is a simple model supporting the basic registers for led and GPIO
mode. The device also supports two blinking rates but not the model
yet.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-7-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aspeed: Add EEPROM I2C devices

The Aspeed boards have at least one EEPROM to hold the Vital Product
Data (VPD).

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180530064049.27976-6-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

smbus: add a smbus_eeprom_init_one() routine

This is an helper routine to add a single EEPROM on an I2C bus. It can
be directly used by smbus_eeprom_init() which adds a certain number of
EEPROMs on mips and x86 machines.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aspeed: add an I2C RTC device to all machines

The AST2500 EVB does not have an RTC but we can pretend that one is
plugged on the I2C bus header.

The romulus and witherspoon boards expects an Epson RX8900 I2C RTC but
a ds1338 is good enough for the basic features we need.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180530064049.27976-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aspeed: add support for the witherspoon-bmc board

The Witherspoon boards are OpenPOWER system hosting POWER9 Processors.
Add support for their BMC including a couple of I2C devices as found
on real HW.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180530064049.27976-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aspeed: remove ignore_memory_transaction_failures on all boards

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180530064049.27976-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm_gicv3_kvm: kvm_dist_get/put: skip the registers banked by GICR

While we skip the GIC_INTERNAL irqs, we don't change the register offset
accordingly. This will overlap the GICR registers value and leave the
last GIC_INTERNAL irq's registers out of update.

Fix this by skipping the registers banked by GICR.

Also for migration compatibility if the migration source (old version
qemu) doesn't send gicd_no_migration_shift_bug = 1 to destination, then
we shift the data of PPI to get the right data for SPI.

Fixes: 367b9f527becdd20ddf116e17a3c0c2bbc486920
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Message-id: 1527816987-16108-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

chardev: Restore CR,LF on stdio

Remove the 'stair-step output' on stdio.

This partially reverts commit 12fb0ac05, which was correct
on the mailing list but got corrupted by the maintainer :p

Introduced-by: 3b876140-c035-dd39-75d0-d54c48128fac@redhat.com
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607210818.12727-1-f4bug@amsat.org
Suggested-by: Thomas Huth <thuth@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp updates

Prasad J Pandit (2):
  slirp: Fix buffer overflow on packet reassembling

Samuel Thibault (3):
  slirp: Add Samuel Thibault's staging tree for slirp
  slirp: fix domainname version availability

# gpg: Signature made Fri 08 Jun 2018 07:12:24 BST
# gpg:                using RSA key 996849C1CF560478
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>"
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: 3A3A 5D46 4660 E867 610C  A427 9968 49C1 CF56 0478

* remotes/thibault/tags/samuel-thibault:
  slirp: reformat m_inc routine
  slirp: correct size computation while concatenating mbuf
  slirp: fix domainname version availability
  slirp: Add Samuel Thibault's staging tree for slirp
  slirp: Fix spurious error report when sending directly

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

slirp: reformat m_inc routine

Coding style changes to the m_inc routine and minor refactoring.

Reported-by: ZDI Disclosures <zdi-disclosures@trendmicro.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

slirp: correct size computation while concatenating mbuf

While reassembling incoming fragmented datagrams, 'm_cat' routine
extends the 'mbuf' buffer, if it has insufficient room. It computes
a wrong buffer size, which leads to overwriting adjacent heap buffer
area. Correct this size computation in m_cat.

Reported-by: ZDI Disclosures <zdi-disclosures@trendmicro.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

slirp: fix domainname version availability

The change missed the 2.12 deadline.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>

slirp: Add Samuel Thibault's staging tree for slirp

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Thomas Huth <thuth@redhat.com>

Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging

Mostly bug fixes and code sanitization motivated by the upcoming
support for Darwin hosts. Thanks to Keno Fischer.

# gpg: Signature made Thu 07 Jun 2018 11:30:56 BST
# gpg:                using RSA key 71D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg:                 aka "Gregory Kurz <gregory.kurz@free.fr>"
# gpg:                 aka "[jpeg image of size 3330]"
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3  4910 71D4 D5E5 822F 73D6

* remotes/gkurz/tags/for-upstream:
  9p: xattr: Properly translate xattrcreate flags
  9p: Properly check/translate flags in unlinkat
  9p: local: Avoid warning if FS_IOC_GETVERSION is not defined
  9p: xattr: Fix crashes due to free of uninitialized value
  9p: Move a couple xattr functions to 9p-util
  9p: local: Properly set errp in fstatfs error path
  9p: proxy: Fix size passed to `connect`

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

9p: xattr: Properly translate xattrcreate flags

As with unlinkat, these flags come from the client and need to
be translated to their host values. The protocol values happen
to match linux, but that need not be true in general.

Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Greg Kurz <groug@kaod.org>

9p: Properly check/translate flags in unlinkat

The 9p-local code previously relied on P9_DOTL_AT_REMOVEDIR and AT_REMOVEDIR
having the same numerical value and deferred any errorchecking to the
syscall itself. However, while the former assumption is true on Linux,
it is not true in general. 9p-handle did this properly however. Move
the translation code to the generic 9p server code and add an error
if unrecognized flags are passed.

Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Greg Kurz <groug@kaod.org>