hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'

Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220324181557.203805-2-zongyuan.li@smartx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/exynos4210: Drop Exynos4210Irq struct

The only time we use the int_combiner_irq[] and ext_combiner_irq[]
arrays in the Exynos4210Irq struct is during realize of the SoC -- we
initialize them with the input IRQs of the combiner devices, and then
connect those to outputs of other devices in
exynos4210_init_board_irqs().  Now that the combiner objects are
easily accessible as s->int_combiner and s->ext_combiner we can make
the connections directly from one device to the other without going
via these arrays.

Since these are the only two remaining elements of Exynos4210Irq,
we can remove that struct entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-19-peter.maydell@linaro.org

hw/arm/exynos4210: Put combiners into state struct

Switch the creation of the combiner devices to the new-style
"embedded in state struct" approach, so we can easily refer
to the object elsewhere during realize.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-18-peter.maydell@linaro.org

hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()

At this point, the function exynos4210_init_board_irqs() splits input
IRQ lines to connect them to the input combiner, output combiner and
external GIC.  The function exynos4210_combiner_get_gpioin() splits
some of the combiner input lines further to connect them to multiple
different inputs on the combiner.

Because (unlike qemu_irq_split()) the TYPE_SPLIT_IRQ device has a
configurable number of outputs, we can do all this in one place, by
making exynos4210_init_board_irqs() add extra outputs to the splitter
device when it must be connected to more than one input on each
combiner.

We do this with a new data structure, the combinermap, which is an
array each of whose elements is a list of the interrupt IDs on the
combiner which must be tied together.  As we loop through each
interrupt ID, if we find that it is the first one in one of these
lists, we configure the splitter device with eonugh extra outputs and
wire them up to the other interrupt IDs in the list.

Conveniently, for all the cases where this is necessary, the
lowest-numbered interrupt ID in each group is in the range of the
external combiner, so we only need to code for this in the first of
the two loops in exynos4210_init_board_irqs().

The old code in exynos4210_combiner_get_gpioin() which is being
deleted here had several problems which don't exist in the new code
in its handling of the multi-core timer interrupts:
 (1) the case labels specified bits 4 ... 8, but bit '8' doesn't
     exist; these should have been 4 ... 7
 (2) it used the input irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]
     multiple times as the input of several different splitters,
     which isn't allowed
 (3) in an apparent cut-and-paste error, the cases for all the
     multi-core timer inputs used "bit + 4" even though the
     bit range for the case was (intended to be) 4 ... 7, which
     meant it was looking at non-existent bits 8 ... 11.
None of these exist in the new code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-17-peter.maydell@linaro.org

hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs

The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0
and EXT_GIC_ID_MCT_G1 multiple times. This means that we will
connect multiple IRQs up to the same external GIC input, which
is not permitted. We do the same thing in the code in
exynos4210_init_board_irqs() because the conditionals selecting
an irq_id in the first loop match multiple interrupt IDs.

Overall we do this for interrupt IDs
(1, 4), (12, 4), (35, 4), (51, 4), (53, 4) for EXT_GIC_ID_MCT_G0
and
(1, 5), (12, 5), (35, 5), (51, 5), (53, 5) for EXT_GIC_ID_MCT_G1

These correspond to the cases for the multi-core timer that we are
wiring up to multiple inputs on the combiner in
exynos4210_combiner_get_gpioin().  That code already deals with all
these interrupt IDs being the same input source, so we don't need to
connect the external GIC interrupt for any of them except the first
(1, 4) and (1, 5). Remove the array entries and conditionals which
were incorrectly causing us to wire up extra lines.

This bug didn't cause any visible effects, because we only connect
up a device to the "primary" ID values (1, 4) and (1, 5), so the
extra lines would never be set to a level.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-16-peter.maydell@linaro.org

hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners

Currently for the interrupts MCT_G0 and MCT_G1 which are
the only ones in the input range of the external combiner
and which are also wired to the external GIC, we connect
them only to the internal combiner and the external GIC.
This seems likely to be a bug, as all other interrupts
which are in the input range of both combiners are
connected to both combiners. (The fact that the code in
exynos4210_combiner_get_gpioin() is also trying to wire
up these inputs on both combiners also suggests this.)

Wire these interrupts up to both combiners, like the rest.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-15-peter.maydell@linaro.org

hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines

In exynos4210_init_board_irqs(), the loop that handles IRQ lines that
are in a range that applies to the internal combiner only creates a
splitter for those interrupts which go to both the internal combiner
and to the external GIC, but it does nothing at all for the
interrupts which don't go to the external GIC, leaving the
irq_table[] array element empty for those.  (This will result in
those interrupts simply being lost, not in a QEMU crash.)

I don't have a reliable datasheet for this SoC, but since we do wire
up one interrupt line in this category (the HDMI I2C device on
interrupt 16,1), this seems like it must be a bug in the existing
QEMU code.  Fill in the irq_table[] entries where we're not splitting
the IRQ to both the internal combiner and the external GIC with the
IRQ line of the internal combiner.  (That is, these IRQ lines go to
just one device, not multiple.)

This bug didn't have any visible guest effects because the only
implemented device that was affected was the HDMI I2C controller,
and we never connect any I2C devices to that bus.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-14-peter.maydell@linaro.org

hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()

In exynos4210_init_board_irqs(), use the TYPE_SPLIT_IRQ device
instead of qemu_irq_split().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-13-peter.maydell@linaro.org

hw/arm/exynos4210: Delete unused macro definitions

Delete a couple of #defines which are never used.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-12-peter.maydell@linaro.org

hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c

The function exynos4210_combiner_get_gpioin() currently lives in
exynos4210_combiner.c, but it isn't really part of the combiner
device itself -- it is a function that implements the wiring up of
some interrupt sources to multiple combiner inputs.  Move it to live
with the other SoC-level code in exynos4210.c, along with a few
macros previously defined in exynos4210.h which are now used only
in exynos4210.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-11-peter.maydell@linaro.org

hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct

The only time we use the ext_gic_irq[] array in the Exynos4210Irq
struct is during realize of the SoC -- we initialize it with the
input IRQs of the external GIC device, and then connect those to
outputs of other devices further on in realize (including in the
exynos4210_init_board_irqs() function).  Now that the ext_gic object
is easily accessible as s->ext_gic we can make the connections
directly from one device to the other without going via this array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-10-peter.maydell@linaro.org

hw/arm/exynos4210: Put external GIC into state struct

Switch the creation of the external GIC to the new-style "embedded in
state struct" approach, so we can easily refer to the object
elsewhere during realize.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-9-peter.maydell@linaro.org

hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c

The function exynos4210_init_board_irqs() currently lives in
exynos4210_gic.c, but it isn't really part of the exynos4210.gic
device -- it is a function that implements (some of) the wiring up of
interrupts between the SoC's GIC and combiner components.  This means
it fits better in exynos4210.c, which is the SoC-level code.  Move it
there. Similarly, exynos4210_git_irq() is used almost only in the
SoC-level code, so move it too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-8-peter.maydell@linaro.org

hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]

Fix a missing set of spaces around '-' in the definition of
combiner_grp_to_gic_id[]. We're about to move this code, so
fix the style issue first to keep checkpatch happy with the
code-motion patch.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-7-peter.maydell@linaro.org

hw/arm/exynos4210: Coalesce board_irqs and irq_table

The exynos4210 code currently has two very similar arrays of IRQs:

 * board_irqs is a field of the Exynos4210Irq struct which is filled
   in by exynos4210_init_board_irqs() with the appropriate qemu_irqs
   for each IRQ the board/SoC can assert
 * irq_table is a set of qemu_irqs pointed to from the
   Exynos4210State struct.  It's allocated in exynos4210_init_irq,
   and the only behaviour these irqs have is that they pass on the
   level to the equivalent board_irqs[] irq

The extra indirection through irq_table is unnecessary, so coalesce
these into a single irq_table[] array as a direct field in
Exynos4210State which exynos4210_init_board_irqs() fills in.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-6-peter.maydell@linaro.org

hw/arm/exynos4210: Drop int_gic_irq[] from Exynos4210Irq struct

The only time we use the int_gic_irq[] array in the Exynos4210Irq
struct is in the exynos4210_realize() function: we initialize it with
the GPIO inputs of the a9mpcore device, and then a bit later on we
connect those to the outputs of the internal combiner.  Now that the
a9mpcore object is easily accessible as s->a9mpcore we can make the
connection directly from one device to the other without going via
this array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-5-peter.maydell@linaro.org

hw/arm/exynos4210: Put a9mpcore device into state struct

The exynos4210 SoC mostly creates its child devices as if it were
board code.  This includes the a9mpcore object.  Switch that to a
new-style "embedded in the state struct" creation, because in the
next commit we're going to want to refer to the object again further
down in the exynos4210_realize() function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-4-peter.maydell@linaro.org

hw/intc/exynos4210_gic: Remove unused TYPE_EXYNOS4210_IRQ_GATE

Now we have removed the only use of TYPE_EXYNOS4210_IRQ_GATE we can
delete the device entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220404154658.565020-3-peter.maydell@linaro.org

hw/arm/exynos4210: Use TYPE_OR_IRQ instead of custom OR-gate device

The Exynos4210 SoC device currently uses a custom device
"exynos4210.irq_gate" to model the OR gate that feeds each CPU's IRQ
line.  We have a standard TYPE_OR_IRQ device for this now, so use
that instead.

(This is a migration compatibility break, but that is OK for this
machine type.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404154658.565020-2-peter.maydell@linaro.org

hw/arm: versal: Connect the CRL

Connect the CRL (Clock Reset LPD) to the Versal SoC.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-5-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Add a model of the Xilinx Versal CRL

Add a model of the Xilinx Versal CRL.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: versal: Add the Cortex-R5Fs

Add the Cortex-R5Fs of the Versal RPU (Real-time Processing Unit)
subsystem.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-3-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: versal: Create an APU CPU Cluster

Create an APU CPU Cluster. This is in preparation to add the RPU.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-2-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-zynqmp: Connect 4 TTC timers

Connect the 4 TTC timers on the ZynqMP.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220331222017.2914409-3-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

timer: cadence_ttc: Break out header file to allow embedding

Break out header file to allow embedding of the the TTC.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220331222017.2914409-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF

It's not possible to provide the guest with the Security extensions
(TrustZone) when using KVM or HVF, because the hardware
virtualization extensions don't permit running EL3 guest code.
However, we weren't checking for this combination, with the result
that QEMU would assert if you tried it:

$ qemu-system-aarch64 -enable-kvm -machine virt,secure=on -cpu host -display none
Unexpected error in object_property_find_err() at ../../qom/object.c:1304:
qemu-system-aarch64: Property 'host-arm-cpu.secure-memory' not found
Aborted

Check for this combination of options and report an error, in the
same way we already do for attempts to give a KVM or HVF guest the
Virtualization or MTE extensions. Now we will report:

qemu-system-aarch64: mach-virt: KVM does not support providing Security extensions (TrustZone) to the guest CPU

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/961
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220404155301.566542-1-peter.maydell@linaro.org

Merge tag 'pull-tcg-20220420' of https://gitlab.com/rth7680/qemu into staging

Cleanup sysemu/tcg.h usage.
Fix indirect lowering vs cond branches
Remove ATOMIC_MMU_IDX
Add tcg_constant_ptr

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJgW38dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8tpggApfg2CDI0bRMDBh0g
# 04/xwNnzHuSa84/ocMOMUfD5pvBblUmeTH8fAwqcAPDM/EEZwWZl2V1bYzuIrbmR
# 8zV+r1cOenDF5Tz8PWfy8XssinTVtTWh/TE0XNV9R/SbEM9eMsjHNu5osKVuLuq1
# rnHWZf8LuY7xGsy4GYqPN0dLE6HtQOfpj/eLGRAj9mZ7re0jKeWg3GdxYoiYDmks
# NKmNHYcWD+SjjFvXlOafniQsHbBZmQc/qp7AShG/+VcYY9o1VfncWD6I2dV13RdB
# N7++ZhGyQR4NOVo6CN1zLKhfuJqzH2q+qJ7vQ3xtXNAk53LGQ91zjoE+3KaJTrcy
# dmnLUw==
# =aKdS
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 12:14:07 PM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-tcg-20220420' of https://gitlab.com/rth7680/qemu:
  tcg: Add tcg_constant_ptr
  accel/tcg: Remove ATOMIC_MMU_IDX
  tcg: Fix indirect lowering vs TCG_OPF_COND_BRANCH
  Don't include sysemu/tcg.h if it is not necessary

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-log-20220420' of https://gitlab.com/rth7680/qemu into staging

Clean up log locking.
Use the FILE* from qemu_log_trylock more often.
Support per-thread log files with -d tid.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJgStUdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+c9Af/ZXnKe6bz5yjXy1mS
# mNIBJUPKrz1RXFfJxuCfEDWrtNc/gvQyvc3weZG5X0cXpiczeWA5V/9xbE9hu5gV
# 4rePiIHWmOrais6GZlqEu2F8P3/XyqdPHtcdBfa1hDneixtpqMHCqnh36nQjHyiU
# ogFxEJ/M9tTwhuWZrXe/JSYAiALEDYMK9bk4RUMOP1c4v37rXqUNOAM1IPhfxLL/
# bK9DQMpz5oUNsWWaqBQ2wQWHkNTOpUEkKGQv0xcQF5SdpYwaxakW9B7/h4QSeOUn
# oY6MFTmkJ4BPrLnkcubn+3PICc9LW0OFuzNnUdMCbeqVbjAUQrdMDalKpy4uNFv9
# U1VqHg==
# =Mt5s
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 11:03:01 AM PDT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-log-20220420' of https://gitlab.com/rth7680/qemu: (39 commits)
  util/log: Support per-thread log files
  util/log: Limit RCUCloseFILE to file closing
  util/log: Rename QemuLogFile to RCUCloseFILE
  util/log: Combine two logfile closes
  util/log: Hoist the eval of is_daemonized in qemu_set_log_internal
  util/log: Rename qemu_logfile_mutex to global_mutex
  util/log: Rename qemu_logfile to global_file
  util/log: Rename logfilename to global_filename
  util/log: Remove qemu_log_close
  softmmu: Use qemu_set_log_filename_flags
  linux-user: Use qemu_set_log_filename_flags
  bsd-user: Use qemu_set_log_filename_flags
  util/log: Introduce qemu_set_log_filename_flags
  sysemu/os-win32: Test for and use _lock_file/_unlock_file
  include/qemu/log: Move entire implementation out-of-line
  include/exec/log: Do not reference QemuLogFile directly
  tests/unit: Do not reference QemuLogFile directly
  linux-user: Expand log_page_dump inline
  bsd-user: Expand log_page_dump inline
  util/log: Drop call to setvbuf
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add tcg_constant_ptr

Similar to tcg_const_ptr, defer to tcg_constant_{i32,i64}.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Remove ATOMIC_MMU_IDX

The last use of this macro was removed in f3e182b10013
("accel/tcg: Push trace info building into atomic_common.c.inc")

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Fix indirect lowering vs TCG_OPF_COND_BRANCH

With TCG_OPF_COND_BRANCH, we extended the lifetimes of
globals across extended basic blocks.  This means that
the liveness computed in pass 1 does not kill globals
in the same way as normal temps.

Introduce TYPE_EBB to match this lifetime, so that we
get correct register allocation for the temps that we
introduce during the indirect lowering pass.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b4cb76e6208 ("tcg: Do not kill globals at conditional branches")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Don't include sysemu/tcg.h if it is not necessary

This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu into staging

Testing, docs and gdbstub updates:

  - make -M virt test exercise -cpu max
  - document how binfmt_misc docker works
  - clean-up the devel TOC generation
  - clean-up check-tcg cross-compile behaviour
  - fix byte swap error in xmm gdbstub access
  - add float_convd test with reference files
  - more reference files for float_convs
  - more cleanly handle gdb crashing during check-tcg

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
# KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
# ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
# 4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
# wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
# mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
# QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
# =8q12
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 08:08:59 AM PDT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu: (25 commits)
  tests/guest-debug: better handle gdb crashes
  target/i386: fix byte swap issue with XMM register access
  tests/tcg: add missing reference files for float_convs
  tests/tcg: add float_convd test
  tests/tcg: remove duplicate sha512-sse case
  tests/tcg: fix non-static build
  tests/docker: remove SKIP_DOCKER_BUILD
  tests/tcg: isolate from QEMU's config-host.mak
  tests/tcg: invoke Makefile.target directly from QEMU's makefile
  tests/tcg: list test targets in Makefile.prereqs
  tests/tcg: prepare Makefile.prereqs at configure time
  tests/tcg: remove CONFIG_USER_ONLY from config-target.mak
  tests/tcg: remove CONFIG_LINUX_USER from config-target.mak
  tests/tcg: add compiler test variables when using containers
  tests/docker: do not duplicate rules for hexagon-cross
  tests/docker: simplify docker-TEST@IMAGE targets
  tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES)
  tests/docker: inline variable definitions or move close to use
  tests/docker: remove unnecessary default definitions
  tests/docker: remove dead variable
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util/log: Support per-thread log files

Add a new log flag, tid, to turn this feature on.
Require the log filename to be set, and to contain %d.

Do not allow tid to be turned off once it is on, nor let
the filename be change thereafter.  This avoids the need
for signalling each thread to re-open on a name change.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-40-richard.henderson@linaro.org>

util/log: Limit RCUCloseFILE to file closing

Use FILE* for global_file.  We can perform an rcu_read on that
just as easily as RCUCloseFILE*.  This simplifies a couple of
places, where previously we required taking the rcu_read_lock
simply to avoid racing to dereference RCUCloseFile->fd.

Only allocate the RCUCloseFile prior to call_rcu.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-39-richard.henderson@linaro.org>

util/log: Rename QemuLogFile to RCUCloseFILE

s/QemuLogFile/RCUCloseFILE/
s/qemu_logfile_free/rcu_close_file/

Emphasize that this is only a carrier for passing a pointer
to call_rcu for closing, and not the real logfile.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-38-richard.henderson@linaro.org>

util/log: Combine two logfile closes

Merge the close from the changed_name block with the close
from the !need_to_open_file block.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-37-richard.henderson@linaro.org>

util/log: Hoist the eval of is_daemonized in qemu_set_log_internal

Only call is_daemonized once.
We require the result on all paths after this point.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-36-richard.henderson@linaro.org>

util/log: Rename qemu_logfile_mutex to global_mutex

Rename to emphasize this covers the file-scope global variables.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-35-richard.henderson@linaro.org>

util/log: Rename qemu_logfile to global_file

Rename to emphasize this is the file-scope global variable.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-34-richard.henderson@linaro.org>

util/log: Rename logfilename to global_filename

Rename to emphasize this is the file-scope global variable.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-33-richard.henderson@linaro.org>

util/log: Remove qemu_log_close

The only real use is in cpu_abort, where we have just
flushed the file via qemu_log_unlock, and are just about
to force-crash the application via abort.  We do not
really need to close the FILE before the abort.

The two uses in test-logging.c can be handled with
qemu_set_log_filename_flags.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-32-richard.henderson@linaro.org>

softmmu: Use qemu_set_log_filename_flags

Perform all logfile setup at startup in one step.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-31-richard.henderson@linaro.org>

linux-user: Use qemu_set_log_filename_flags

Perform all logfile setup in one step.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-30-richard.henderson@linaro.org>

bsd-user: Use qemu_set_log_filename_flags

Perform all logfile setup in one step.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-29-richard.henderson@linaro.org>

util/log: Introduce qemu_set_log_filename_flags

Provide a function to set both filename and flags at
the same time.  This is the common case at startup.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-28-richard.henderson@linaro.org>

sysemu/os-win32: Test for and use _lock_file/_unlock_file

The bug referenced in os-win32.h was fixed in mingw-w64 v6.

According to repology, version 5 used by ubuntu 18, which is
not yet out of support, so provide a meson link test for it.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-27-richard.henderson@linaro.org>

include/qemu/log: Move entire implementation out-of-line

Move QemuLogFile, qemu_logfile, and all inline functions into qemu/log.c.
No need to expose these implementation details in the api.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-26-richard.henderson@linaro.org>

include/exec/log: Do not reference QemuLogFile directly

Use qemu_log_trylock/unlock instead of the raw rcu_read.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220417183019.755276-25-richard.henderson@linaro.org>

tests/unit: Do not reference QemuLogFile directly

Use qemu_log_lock/unlock instead of the raw rcu_read.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-24-richard.henderson@linaro.org>

linux-user: Expand log_page_dump inline

We have extra stuff to log at the same time.
Hoist the qemu_log_lock/unlock to the caller and use fprintf.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-23-richard.henderson@linaro.org>

bsd-user: Expand log_page_dump inline

We have extra stuff to log at the same time.
Hoist the qemu_log_trylock/unlock to the caller and use fprintf.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-22-richard.henderson@linaro.org>

util/log: Drop call to setvbuf

Now that the log buffer is flushed after every qemu_log_unlock,
which includes every call to qemu_log, we do not need to force
line buffering (or unbuffering for windows).  Block buffer the
entire loggable unit.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-21-richard.henderson@linaro.org>

util/log: Remove qemu_log_flush

All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>

util/log: Mark qemu_log_trylock as G_GNUC_WARN_UNUSED_RESULT

Now that all uses have been updated, consider a missing
test of the result of qemu_log_trylock a bug and Werror.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-19-richard.henderson@linaro.org>

util/log: Drop return value from qemu_log

The only user of this feature, tcg_dump_ops, has been
converted to use fprintf directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-18-richard.henderson@linaro.org>

util/log: Use qemu_log_trylock/unlock in qemu_log

Avoid using QemuLogFile and RCU directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-17-richard.henderson@linaro.org>

target/nios2: Remove log_cpu_state from reset

This is redundant with the logging done in cpu_common_reset.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-16-richard.henderson@linaro.org>

accel/tcg: Use cpu_dump_state between qemu_log_trylock/unlock

Inside log_cpu_state, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-15-richard.henderson@linaro.org>

exec/log: Remove log_disas and log_target_disas

These functions are no longer used.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-14-richard.henderson@linaro.org>

exec/translator: Pass the locked filepointer to disas_log hook

We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>

tcg: Pass the locked filepointer to tcg_dump_ops

We have already looked up and locked the filepointer.
Use fprintf instead of qemu_log directly for output
in and around tcg_dump_ops.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-12-richard.henderson@linaro.org>

util/log: Remove qemu_log_vprintf

This function is no longer used.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-11-richard.henderson@linaro.org>

*: Use fprintf between qemu_log_trylock/unlock

Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.

Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>

hw/xen: Split out xen_pv_output_msg

Do not replicate the individual logging statements.
Use qemu_log_trylock/unlock instead of qemu_log directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-9-richard.henderson@linaro.org>

util/log: Rename qemu_log_lock to qemu_log_trylock

This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.

To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>

util/log: Move qemu_log_lock, qemu_log_unlock out of line

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-7-richard.henderson@linaro.org>

os-posix: Use qemu_log_enabled

Do not reference qemu_logfile directly;
use the predicate provided by qemu/log.h.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-6-richard.henderson@linaro.org>

util/log: Pass Error pointer to qemu_set_log

Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>

util/log: Return bool from qemu_set_log_filename

Per the recommendations in qapi/error.h, return false on failure.

Use the return value in the monitor, the only place we aren't
already passing error_fatal or error_abort.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-4-richard.henderson@linaro.org>

target/hexagon: Remove qemu_set_log in hexagon_translate_init

This code appears to be trying to make sure there is a logfile.
But that's already true -- the logfile will either be set by -D,
or will be stderr.  In either case, not appropriate here.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-3-richard.henderson@linaro.org>

util/log: Drop manual log buffering

This buffering was introduced during the Paleozoic: 9fa3e853531.

There has never been an explanation as to why we may not allow
glibc to allocate the file buffer itself.  We certainly have
many other uses of mmap and malloc during user-only startup,
so presumably whatever the issue was, it has been fixed during
the preceeding 18 years.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-2-richard.henderson@linaro.org>

Merge tag 'pull-block-2022-04-20' of https://gitlab.com/hreitz/qemu into staging

Block patches:
- Some changes for qcow2's refcount repair algorithm to make it work for
  qcow2 images stored on block devices
- Skip test cases that require zstd when support for it is missing
- Some refactoring in the iotests' meson.build

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmJf/asSHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfYXUQAKQv5qKQBjU4MTwlS8A4h6B6OJgC1Sik
# 9BB7LO/QFjuuF4vNKpcUlf6i0epxPP8B5pmCjaAolMh6u6wZwL7hHq+SOYXvejTo
# vINW+r097U0qYPkSV+cS6tbW92rYJDD7VxF+34udiWXGjozsBTw/k9DfJaa9Ht66
# 2dw3AxUa4lxN1/ejFzDLx3DNaff+HctLhgVpHeBb0eN2zr2Ug5+ZFgMoiWwU6r6J
# EzTORLAzATerlQVYUkhh4Y/UdVLLw1SzTWOQv5b/NqvaLfKmYsQobSfjC2ajO8XJ
# P2REigcOAij5uWVRf4EY7xoqmADP8pXxuOTzw0hyGNLOLNcXoFbfW45WSPoY+YgH
# EH1TtC4vMsg/MlO/A3PJr9v+SNqxz32cul3MVrY3PuG4Dzz0riy9GhtFUU37igbj
# mR6pP3nSa/f2X4+9B6/UrPjLzusRvc8bvzYqVEnSLABav11npphkYaR9QT1fQUVD
# Zw26igXtmLKUcfop/EqShbhblk0ZLYDTj/Lx7X+thC9OCrK1QgF6qAsIUqiS1iHz
# vwdktRTCofo4ZIT/OCz5QeriJqDz0B7VJ8/4i/uvm2eq8BUsn2mJuyAGD2XtaONV
# rmASrV9VbajdxX5VptjKOOHG6aHtqQlKbyBFog8I4nqVFdjdSMalb++gBMCrPu1A
# 1iZPsOOyz/8+
# =BF0c
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 05:33:47 AM PDT
# gpg:                using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg:                issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00  4D34 A1FA 40D0 9801 9CDF

* tag 'pull-block-2022-04-20' of https://gitlab.com/hreitz/qemu:
  qcow2: Add errp to rebuild_refcount_structure()
  iotests/108: Test new refcount rebuild algorithm
  qcow2: Improve refcount structure rebuilding
  iotests/303: Check for zstd support
  iotests/065: Check for zstd support
  iotests.py: Add supports_qcow2_zstd_compression()
  tests/qemu-iotests: Move the bash and sanitizer checks to meson.build
  tests/qemu-iotests/meson.build: Improve the indentation

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tests/guest-debug: better handle gdb crashes

There are a number of GDB's on various distros which fail fairly hard
when attempting to talk to a cross-arch guest. The previous attempt to
catch this was incorrect as the shell will deliver signals as 128+n.
Fix the detection and while we are it improve the logging we dump into
the test output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-26-alex.bennee@linaro.org>

target/i386: fix byte swap issue with XMM register access

During the conversion to the gdb_get_reg128 helpers the high and low
parts of the XMM register where inadvertently swapped. This causes
reads of the register to report the incorrect value to gdb.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/971
Fixes: b7b8756a9c (target/i386: use gdb_get_reg helpers)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Message-Id: <20220419091020.3008144-25-alex.bennee@linaro.org>

tests/tcg: add missing reference files for float_convs

We might as well include a reference file for i386/x86_64. I was going
to include s390x as well but it's broken hence I raised:

  https://gitlab.com/qemu-project/qemu/-/issues/979.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220419091020.3008144-24-alex.bennee@linaro.org>

tests/tcg: add float_convd test

This is a simple transliteration of the float_convs test but this time
working with doubles. I'm used it to test the handling of vector
registers in gdbstub but wasn't able to find a non-ugly way to
automate it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-23-alex.bennee@linaro.org>

tests/tcg: remove duplicate sha512-sse case

We already generate the sha512-sse case in the i386 makefile which
works for both i386 and x86_64.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: f8a4c6d728 ("tests/tcg: add vectorised sha512 versions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-22-alex.bennee@linaro.org>

tests/tcg: fix non-static build

If linking with -static fails at configure time, -static should not be used
at build time either. Do not include BUILD_STATIC in $config_target_mak.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-18-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-21-alex.bennee@linaro.org>

tests/docker: remove SKIP_DOCKER_BUILD

It is now unused.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-17-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-20-alex.bennee@linaro.org>

tests/tcg: isolate from QEMU's config-host.mak

Do not include variables for the QEMU's own compiler, as they
are not necessarily related to the cross compiler used for tests/tcg.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-19-alex.bennee@linaro.org>

tests/tcg: invoke Makefile.target directly from QEMU's makefile

Build the "docker.py cc" invocation directly in tests/tcg/configure.sh, and
remove the Makefile.qemu wrapper around Makefile.target.  The config-*.mak
files now include the actual variables used when building the tests, rather
than the CROSS_* variables that Makefile.qemu used to "translate".

This is a first step towards generalizing the cross-compilation infrastructure
so that it can be used for firmware as well.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-18-alex.bennee@linaro.org>

tests/tcg: list test targets in Makefile.prereqs

Omit the rules altogether for targets that do not have a compiler.
Makefile.qemu now is only invoked if the tests are actually built/run.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-17-alex.bennee@linaro.org>

tests/tcg: prepare Makefile.prereqs at configure time

List the dependencies of the build-tcg-tests-* and run-tcg-tests-*
targets in a Makefile fragment, without going through Makefile.prereqs's
"parsing" of config-*.mak.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-13-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-16-alex.bennee@linaro.org>

tests/tcg: remove CONFIG_USER_ONLY from config-target.mak

Just check the target name instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-12-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-15-alex.bennee@linaro.org>

tests/tcg: remove CONFIG_LINUX_USER from config-target.mak

Just check the target name instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220401141326.1244422-11-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-14-alex.bennee@linaro.org>

tests/tcg: add compiler test variables when using containers

Even for container-based cross compilation use $(CROSS_CC_HAS_*) variables.
This makes the TCG test makefiles oblivious of whether the compiler is
invoked through a container or not.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-10-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-13-alex.bennee@linaro.org>

tests/docker: do not duplicate rules for hexagon-cross

The commands for docker-image-debian-hexagon-cross are the same as those
in debian-toolchain-run, just with a nonstandard path to build-toolchain.sh.
Reuse the definition by renaming the debian-hexagon-cross.docker.d directory.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-9-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-12-alex.bennee@linaro.org>

tests/docker: simplify docker-TEST@IMAGE targets

No need to go through the shell when we already have the test and images at
the point where the targets are declared.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-8-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-11-alex.bennee@linaro.org>

tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES)

Now that DOCKER_IMAGES is only defined after DOCKER_VIRTUAL_IMAGES is
complete, there is no need to re-filter DOCKER_IMAGES against it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-7-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-10-alex.bennee@linaro.org>

tests/docker: inline variable definitions or move close to use

Variables that are defined with ":=" are handled imperatively, so moving
them closer to the first use ensures that all the assignments prior to
the first use are taken into account.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-9-alex.bennee@linaro.org>

tests/docker: remove unnecessary default definitions

The definition of DOCKER_IMAGES and DOCKER_TESTS copes already with an
empty value of $(IMAGES) and $(TESTS), no need to force them to "%" if
undefined.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-5-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-8-alex.bennee@linaro.org>

tests/docker: remove dead variable

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-4-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-7-alex.bennee@linaro.org>

tests/docker: remove test targets

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-6-alex.bennee@linaro.org>

tests/docker: remove dead code for linux-user containers

debian-powerpc-user-cross was the only linux-user powered cross builder
and it was removed in commit 80394ccf21 ("tests/docker: remove
debian-powerpc-user-cross", 2019-09-26). Remove all the infrastructure
around it since it is now unused.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-5-alex.bennee@linaro.org>

docs/devel: drop :hidden: and :includehidden: tags

This was confusing and in the case of qtest was hiding the details of
the qgraph sub-document in the qtest pages.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-4-alex.bennee@linaro.org>

docs/devel: add some notes on the binfmt-image-debian targets

We document some of this on the wiki but lets move it into our
official developer notes documentation.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-3-alex.bennee@linaro.org>

tests/avocado: update aarch64_virt test to exercise -cpu max

The Fedora 29 kernel is quite old and importantly fails when running
in LPA2 scenarios. As it's not really exercising much of the CPU space
replace it with a custom 5.16.12 kernel with all the architecture
options turned on. There is a minimal buildroot initramfs included in
the kernel which has a few tools for stress testing the memory
subsystem. The userspace also targets the Neoverse N1 processor so
would fail with a v8.0 cpu like cortex-a53.

While we are at it move the test into its own file so it can have an
assigned maintainer.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-2-alex.bennee@linaro.org>

Merge tag 'pull-request-2022-04-20' of https://gitlab.com/thuth/qemu into staging

* Drop perl-Test-Harness from the CI containers / VMs
* Some qtest fixes
* Convert ccid doc to restructuredText
* Add compat machines for 7.1
* Allow overwrite smp and memory size in avocado tests

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmJf32MRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXEHQ//e4S4rlETwKwIQR6SqaOGl9wQr8yPX80r
# V6UFMt+MhTdtItBDa+cDrWY7xkBU3DpIPcfDRfg4P7F/WB5LFaXfYPQHIB28cmkQ
# f5nX4dIVfas/wS+2zk8uvaZEsuv0QiVCKldF2+Z49rE/1UMDfJkHJI+c3MvJToe7
# CPuzR9SL7wfb3gFV5YrDqyZFRtpUurNhQ3j7sfmh+9P+9QVZg118pDI/lE2WIIBT
# HwrB0/keRdgepEv/n+6bwIhf+XRPnKyK8ETRo5vaVaj5BxKDHDVaevNYABp1kBB5
# udyCrEtS4KjPmyNgsMc1ZnIdG2R2pGyRPPYvVUXVpODkAQFoprjTS4yc5Gauqeuj
# EtrDJDnV+EFtZZlnd2T4Uj+ZxTR9suXWF+kJU8R7vXX5Dffu7C7tAw88FqQoG1GR
# mlhtN4fng2PJ/wEZUc+OESVjLUW/3H8yA6rRsbD21gMFaPVxrxc5iXrJoPEWoz1q
# BPbc+1v+lf3PgIDTMokogV0HFaxl8Xoq7T1TaXhQHEbEchfPib55VAHnN7rXKJgs
# eQt7FBqRTCZdFgRnKNZ71NMGdW2suHRk2lpabGPcuGb/bxyJWc6lcdOM8uEMDUlq
# vzAZwbXx3mlGArx7jaGERTrColCgMa0WLbQZ54eP1qCJnqUbzadaIQxmlMaPFWgm
# 2imKnvET5PM=
# =vsLu
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 03:24:35 AM PDT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2022-04-20' of https://gitlab.com/thuth/qemu:
  tests/avocado: Allow overwrite smp and memory size command line options
  hw: Add compat machines for 7.1
  docs/ccid: convert to restructuredText
  tests/qtest: properly initialise the vring used idx
  tests/qtest: Move the fuzz tests to x86 only
  tests/qtest: Enable more tests for the "mipsel" target
  tests: Drop perl-Test-Harness from the CI containers / VMs

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qcow2: Add errp to rebuild_refcount_structure()

Instead of fprint()-ing error messages in rebuild_refcount_structure()
and its rebuild_refcounts_write_refblocks() helper, pass them through an
Error object to qcow2_check_refcounts() (which will then print it).

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220405134652.19278-4-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>