semihosting: Create qemu_semihosting_guestfd_init

For arm-compat, initialize console_{in,out}_gf;
otherwise, initialize stdio file descriptors.

This will go some way to cleaning up arm-compat, and
will allow other semihosting to use normal stdio.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Add GuestFDConsole

Add a GuestFDType for connecting to the semihosting console.
Hook up to read, write, isatty, and fstat syscalls.

Note that the arm-specific syscall flen cannot be applied
to the console, because the console is not a descriptor
exposed to the guest.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Create qemu_semihosting_console_write

Will replace qemu_semihosting_console_{outs,outc},
but we need more plumbing first.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Cleanup chardev init

Rename qemu_semihosting_connect_chardevs to
qemu_semihosting_chardev_init; pass the result
directly to qemu_semihosting_console_init.

Store the chardev in SemihostingConsole instead
of SemihostingConfig, which lets us drop
semihosting_get_chardev.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Expand qemu_semihosting_console_inc to read

Allow more than one character to be read at one time.
Will be used by m68k and nios2 semihosting for stdio.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Pass CPUState to qemu_semihosting_console_inc

We don't need CPUArchState, and we do want the CPUState of the
thread performing the operation -- use this instead of current_cpu.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Fix docs comment for qemu_semihosting_console_inc

The implementation of qemu_semihosting_console_inc does not
defer to gdbstub, but only reads from the fifo in console.c.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

gdbstub: Adjust gdb_syscall_complete_cb declaration

Change 'ret' to uint64_t.  This resolves a FIXME in the
m68k and nios2 semihosting that we've lost data.
Change 'err' to int.  There is nothing target-specific
about the width of the errno value.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Create semihost_sys_gettimeofday

This syscall will be used by m68k and nios2 semihosting.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Create semihost_sys_{stat,fstat}

These syscalls will be used by m68k and nios2 semihosting.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_system

Split out the non-ARM specific portions of SYS_SYSTEM to a
reusable function.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_rename

Split out the non-ARM specific portions of SYS_RENAME to a
reusable function.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_remove

Split out the non-ARM specific portions of SYS_REMOVE to a
reusable function.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_flen

The ARM-specific SYS_FLEN isn't really something that can be
reused by other semihosting apis, but there are parts that can
reused for the implementation of semihost_sys_fstat.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_isatty

Split out the non-ARM specific portions of SYS_ISTTY to a
reusable function.  This handles all GuestFD.

Add a common_semi_istty_cb helper to translate the Posix
error return, 0+ENOTTY, to the Arm semihosting not-a-file
success result.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_lseek

Split out the non-ARM specific portions of SYS_SEEK to a
reusable function.  This handles all GuestFD.  Isolate the
curious ARM-specific return value processing to a new
callback, common_semi_seek_cb.

Expand the internal type of the offset to int64_t, and
provide the whence argument, which will be required by
m68k and nios2 semihosting.

Note that gdb_do_syscall %x reads target_ulong, not int.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Bound length for semihost_sys_{read,write}

Fixes a minor bug in which a 64-bit guest on a 32-bit host could
truncate the length.  This would only ever cause a problem if
there were no bits set in the low 32, so that it truncates to 0.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_write

Split out the non-ARM specific portions of SYS_WRITE to a
reusable function.  This handles all GuestFD.  This removes
the last use of common_semi_syscall_len.

Note that gdb_do_syscall %x reads target_ulong, not int.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_read

Split out the non-ARM specific portions of SYS_READ to a
reusable function.  This handles all GuestFD.  Isolate the
curious ARM-specific return value processing to a new
callback, common_semi_rw_cb.

Note that gdb_do_syscall %x reads target_ulong, not int.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_close

Split out the non-ARM specific portions of SYS_CLOSE to a
reusable function.  This handles all GuestFD.

Note that gdb_do_syscall %x reads target_ulong, not int.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out semihost_sys_open

Split out the non-ARM specific portions of SYS_OPEN to a
reusable function.  This handles gdb and host file i/o.

Add helpers to validate the length of the filename string.
Prepare for usage by other semihosting by allowing the
filename length parameter to be 0, and calling strlen.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Move GET_ARG/SET_ARG earlier in the file

Moving this to be useful for another function
besides do_common_semihosting.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Use env more often in do_common_semihosting

We've already loaded cs->env_ptr into a local variable; use it.
Since env is unconditionally used, we don't need a dummy use.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out common-semi-target.h

Move the ARM and RISCV specific helpers into
their own header file.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out common_semi_has_synccache

We already have some larger ifdef blocks for ARM and RISCV;
split out a boolean test for SYS_SYNCCACHE.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split common_semi_flen_buf per target

We already have some larger ifdef blocks for ARM and RISCV;
split out common_semi_stack_bottom per target.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split is_64bit_semihosting per target

We already have some larger ifdef blocks for ARM and RISCV;
split the function into multiple implementations per arch.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Use struct gdb_stat in common_semi_flen_cb

Load the entire 64-bit size value.  While we're at it,
use offsetof instead of an integer constant.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

gdbstub: Convert GDB error numbers to host error numbers

Provide the callback with consistent state -- always use
host error numbers.  The individual callback can then
decide if the errno requires conversion for the guest.

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Define errno values in gdbstub.h

Define constants for the errno values defined by the
gdb remote fileio protocol.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Move gdb_stat and gdb_timeval to gdbstub.h

We have two copies of these structures, and require them
in semihosting/ going forward.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec: Move gdb open flags to gdbstub.h

There were 3 copies of these flags.  Place them in the
file with gdb_do_syscall, with which they belong.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Remove GDB_O_BINARY

The value is zero, and gdb always opens files in binary mode.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Move common-semi.h to include/semihosting/

This header is not private to the top-level semihosting directory,
so place it in the public include directory.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Return void from do_common_semihosting

Perform the cleanup in the FIXME comment in common_semi_gdb_syscall.
Do not modify guest registers until the syscall is complete,
which in the gdbstub case is asynchronous.

In the synchronous non-gdbstub case, use common_semi_set_ret
to set the result.  Merge set_swi_errno into common_semi_cb.
Rely on the latter for combined return value / errno setting.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Clean up common_semi_open_cb

Use common_semi_cb to return results instead of calling
set_swi_errno and common_semi_set_ret directly.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Clean up common_semi_flen_cb

Do not read from the gdb struct stat buffer if the callback is
reporting an error. Use common_semi_cb to finish returning results.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Adjust error checking in common_semi_cb

The err parameter is non-zero if and only if an error occured.
Use this instead of ret == -1 for determining if we need to
update the saved errno.

This fixes the errno setting of SYS_ISTTY, which returns 0 on
error, not -1.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Inline set_swi_errno into common_semi_cb

Do not store 'err' into errno only to read it back immediately.
Use 'ret' for the return value, not 'reg0'.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Split out guestfd.c

In arm-compat-semi.c, we have more advanced treatment of
guest file descriptors than we do in other implementations.
Split out GuestFD and related functions to a new file so
that they can be shared.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Simplify softmmu_lock_user_string

We are not currently bounding the search to the 1024 bytes
that we allocated, possibly overrunning the buffer.
Use softmmu_strlen_user to find the length and allocate the
correct size from the beginning.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Add target_strlen for softmmu-uaccess.h

Mirror the interface of the user-only function of the same name.
Use probe_access_flags for the common case of ram, and
cpu_memory_rw_debug for the uncommon case of mmio.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Use probe_access_flags (pmm)

accel/stubs: Add tcg stub for probe_access_flags

Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Move softmmu-uaccess.h functions out of line

Rather that static (and not even inline) functions within a
header, move the functions to semihosting/uaccess.c.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Improve condition for config.c and console.c

While CONFIG_SEMIHOSTING is currently only set for softmmu,
this will not continue to be true.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Return failure from softmmu-uaccess.h functions

We were reporting unconditional success for these functions;
pass on any failure from cpu_memory_rw_debug.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: Move exec/softmmu-semi.h to semihosting/softmmu-uaccess.h

We have a subdirectory for semihosting; move this file out of exec.
Rename to emphasize the contents are a replacement for the functions
in linux-user/bsd-user uaccess.c.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-target-arm-20220627' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * sphinx: change default language to 'en'
 * Diagnose attempts to emulate EL3 in hvf as well as kvm
 * More SME groundwork patches
 * virt: Fix calculation of physical address space size
   for v7VE CPUs (eg cortex-a15)

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmK5hKEZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3lggEACtE2balVHrVCeSQkRW+FnS
# avm5i54MIGf3cgNhTKwD9ED3hl03Xm49yQkaq0gB6Qa4wQPEcYQLSyzP+UYIILO5
# 3xoWEw0nbtKWBuCzdiolynL1VFht6GV+Ga8lShoBiQsI/eARC6ZELvBv7gbApf4p
# DpDq1ty7fXMmMCNM5vgX9fu/LXahSONDXbYMpHpohnaLXCEF9MwqpO5TJf65Bgze
# z2+NO4R5u26mCcad7ltoiz3OKkq4Bq+b+QXrm6LmvSCIkvk6MUZuU1NwHSiqUoV/
# nOwhJriOVl8JG0sX0xzNZADYBt0YlcVuDZzyxP8eOiQ54CVK7rJOJSi+aiGkg2Mn
# YC4CkFZY9iM5YTA6y6T5mye7kLb/pJ746rLM1ia6Ng3rUwoE9bdvruqTMfPPJuoo
# XxMBQrjRjY6BzESG0NbjLgg80dPtqeOipjglYI7GCvh0i2yQVmKLQon5TK9DsScC
# 7Gu6IPVWZAb3axGEuqjJ4E+7PyyEW7zYgWNOpZoQW958WHDK0KSPrOwqxAC+QdEi
# vagKJGCQPuZiOARpXm6F/nscEDcy7P33z120O9/R6HuticGaM/oBaWy89CR4hbHB
# NWx5+0h5M/je8hJFJJVfHldR3nIpvnUtb4KEVoiNuxkrGZoejgTlBdKNL4Nph0U0
# E+CQyMuBBQ88LEbyCjJS5w==
# =GILG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Jun 2022 03:51:21 PM +0530
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20220627' of https://git.linaro.org/people/pmaydell/qemu-arm: (25 commits)
  target/arm: Check V7VE as well as LPAE in arm_pamax
  target/arm: Extend arm_pamax to more than aarch64
  target/arm: Move pred_{full, gvec}_reg_{offset, size} to translate-a64.h
  target/arm: Add SVL to TB flags
  target/arm: Introduce sve_vqm1_for_el_sm
  target/arm: Add cpu properties for SME
  target/arm: Unexport aarch64_add_*_properties
  target/arm: Move arm_cpu_*_finalize to internals.h
  target/arm: Generalize cpu_arm_{get, set}_default_vec_len
  target/arm: Generalize cpu_arm_{get,set}_vq
  target/arm: Create ARMVQMap
  target/arm: Move error for sve%d property to arm_cpu_sve_finalize
  target/arm: Implement SMSTART, SMSTOP
  target/arm: Add the SME ZA storage to CPUARMState
  target/arm: Add PSTATE.{SM,ZA} to TB flags
  target/arm: Add SMIDR_EL1, SMPRI_EL1, SMPRIMAP_EL2
  target/arm: Add SMCR_ELx
  target/arm: Add SVCR
  target/arm: Add ARM_CP_SME
  target/arm: Add syn_smetrap
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Check V7VE as well as LPAE in arm_pamax

In machvirt_init we create a cpu but do not fully initialize it.
Thus the propagation of V7VE to LPAE has not been done, and we
compute the wrong value for some v7 cpus, e.g. cortex-a15.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1078
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Message-id: 20220619001541.131672-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Extend arm_pamax to more than aarch64

Move the code from hw/arm/virt.c that is supposed
to handle v7 into the one function.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Message-id: 20220619001541.131672-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move pred_{full, gvec}_reg_{offset, size} to translate-a64.h

We will need these functions in translate-sme.c.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add SVL to TB flags

We need SVL separate from VL for RDSVL et al, as well as
ZA storage loads and stores, which do not require PSTATE.SM.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Introduce sve_vqm1_for_el_sm

When Streaming SVE mode is enabled, the size is taken from
SMCR_ELx instead of ZCR_ELx.  The format is shared, but the
set of vector lengths is not.  Further, Streaming SVE does
not require any particular length to be supported.

Adjust sve_vqm1_for_el to pass the current value of PSTATE.SM
to the new function.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add cpu properties for SME

Mirror the properties for SVE.  The main difference is
that any arbitrary set of powers of 2 may be supported,
and not the stricter constraints that apply to SVE.

Include a property to control FEAT_SME_FA64, as failing
to restrict the runtime to the proper subset of insns
could be a major point for bugs.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220620175235.60881-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Unexport aarch64_add_*_properties

These functions are not used outside cpu64.c,
so make them static.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move arm_cpu_*_finalize to internals.h

Drop the aa32-only inline fallbacks,
and just use a couple of ifdefs.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Generalize cpu_arm_{get, set}_default_vec_len

Rename from cpu_arm_{get,set}_sve_default_vec_len,
and take the pointer to default_vq from opaque.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Generalize cpu_arm_{get,set}_vq

Rename from cpu_arm_{get,set}_sve_vq, and take the
ARMVQMap as the opaque parameter.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Create ARMVQMap

Pull the three sve_vq_* values into a structure.
This will be reused for SME.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move error for sve%d property to arm_cpu_sve_finalize

Keep all of the error messages together.  This does mean that
when setting many sve length properties we'll only generate
one error, but we only really need one.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement SMSTART, SMSTOP

These two instructions are aliases of MSR (immediate).
Use the two helpers to properly implement svcr_write.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add the SME ZA storage to CPUARMState

Place this late in the resettable section of the structure,
to keep the most common element offsets from being > 64k.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-10-richard.henderson@linaro.org
[PMM: expanded comment on zarray[] format]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add PSTATE.{SM,ZA} to TB flags

These are required to determine if various insns
are allowed to issue.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add SMIDR_EL1, SMPRI_EL1, SMPRIMAP_EL2

Implement the streaming mode identification register, and the
two streaming priority registers.  For QEMU, they are all RES0.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add SMCR_ELx

These cpregs control the streaming vector length and whether the
full a64 instruction set is allowed while in streaming mode.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add SVCR

This cpreg is used to access two new bits of PSTATE
that are not visible via any other mechanism.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add ARM_CP_SME

This will be used for controlling access to SME cpregs.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add syn_smetrap

This will be used for raising various traps for SME.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add SMEEXC_EL to TB flags

This is CheckSMEAccess, which is the basis for a set of
related tests for various SME cpregs and instructions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement TPIDR2_EL0

This register is part of SME, but isn't closely related to the
rest of the extension.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620175235.60881-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Catch invalid kvm state also for hvf

Some features such as running in EL3 or running M profile code are
incompatible with virtualization as QEMU implements it today. To prevent
users from picking invalid configurations on other virt solutions like
Hvf, let's run the same checks there too.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1073
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620192242.70573-2-agraf@csgraf.de
[PMM: Allow qtest accelerator too; tweak comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

accel: Introduce current_accel_name()

We need to fetch the name of the current accelerator in flexible error
messages more going forward. Let's create a helper that gives it to us
without casting in the target code.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620192242.70573-1-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sphinx: change default language to 'en'

Fixes the following Sphinx warning (treated as error) starting
with 5.0 release:

Warning, treated as error:
Invalid configuration value found: 'language = None'. Update your configuration to a valid langauge code. Falling back to 'en' (English).

Signed-off-by: Martin Liska <mliska@suse.cz>
Message-id: e91e51ee-48ac-437e-6467-98b56ee40042@suse.cz
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'qemu-sparc-20220626' of https://github.com/mcayland/qemu into staging

qemu-sparc queue

# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmK4moUeHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfaXsH/0+FT9TbHXCplB8h
# gvOETq9r5UscYMqUIbRPv7eFIhhZUfq4mCzpthZHYfMA6Tag0jMqaP5ymATm6Jm/
# GgS/7Fx+14uO54Cu4NwIFylRuDt39cESrBHrVjmXmYzOXx7a040+TPxtHHwSRXiQ
# Vvx5Oo0P8qQfADQe/Y9iray3JBdFMg4yejO37yrdfP58Nh2dzr9dNKw6apY8dwcv
# eTVTqVbYY5AAKOjStpxb0x8dFq/WXttclbeaiSZsK1wnuqhJdUtiMY3UaAfYdMEW
# kputMhTZqV/oopUY0mHmBEUK843s8bSQs2aoCSXLamGTWcrm27XNOsX0f4AYwf/y
# jWBcSvg=
# =0MrK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 26 Jun 2022 11:12:29 PM +0530
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* tag 'qemu-sparc-20220626' of https://github.com/mcayland/qemu: (55 commits)
  artist: set memory region owners for buffers to the artist device
  ps2: remove update_irq() function and update_arg parameter
  pckbd: add QEMU interface comment for I8042 device
  pckbd: switch I8042 device from update_irq() function to PS2 device gpio
  pckbd: add i8042_reset() function to I8042 device
  pckbd: add QEMU interface comment for I8042_MMIO device
  pckbd: switch I8042_MMIO device from update_irq() function to PS2 device gpio
  lasips2: add QEMU interface comment
  lasips2: switch over from update_irq() function to PS2 device gpio
  lasips2: use sysbus IRQ for output IRQ
  lasips2: implement lasips2_realize()
  lasips2: add base property
  lasips2: move initialisation of PS2 ports from lasi_initfn() to lasi_init()
  lasips2: move mapping of LASIPS2 registers to HPPA machine
  lasips2: implement lasips2_init() function
  lasips2: rename lasips2_init() to lasips2_initfn() and update it to return the LASIPS2 device
  lasips2: move lasips2 QOM types from lasips2.c to lasips2.h
  lasips2: QOMify LASIPS2State
  pl050: add QEMU interface comment
  pl050: switch over from update_irq() function to PS2 device gpio
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

artist: set memory region owners for buffers to the artist device

This fixes the output of "info qom-tree" so that the buffers appear as children
of the artist device, rather than underneath the "unattached" container.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624160839.886649-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Helge Deller <deller@gmx.de>

ps2: remove update_irq() function and update_arg parameter

Now that all the PS2 devices have been converted to use GPIOs the update_irq()
callback function and the update_arg parameter can be removed.

This allows these arguments to be completely removed from ps2_kbd_init() and
ps2_mouse_init(), along with the transitional logic that was added to
ps2_raise_irq() and ps2_lower_irq().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-55-mark.cave-ayland@ilande.co.uk>

pckbd: add QEMU interface comment for I8042 device

This describes the I8042 device interface implemented within QEMU.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624134109.881989-54-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

pckbd: switch I8042 device from update_irq() function to PS2 device gpio

Define a new qdev input gpio for handling incoming PS2 IRQs, and then wire up the
PS2 keyboard and mouse devices to use it. At the same time set update_irq() and
update_arg to NULL in ps2_kbd_init() and ps2_mouse_init() to ensure that any
accidental attempt to use the legacy update_irq() function will cause a NULL
pointer dereference.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-53-mark.cave-ayland@ilande.co.uk>

pckbd: add i8042_reset() function to I8042 device

This means that it is no longer necessary to call qemu_register_reset() manually
within i8042_realizefn().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-52-mark.cave-ayland@ilande.co.uk>

pckbd: add QEMU interface comment for I8042_MMIO device

This describes the I8042_MMIO device interface implemented within QEMU.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624134109.881989-51-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

pckbd: switch I8042_MMIO device from update_irq() function to PS2 device gpio

Define a new qdev input gpio for handling incoming PS2 IRQs, and then wire up the
PS2 keyboard and mouse devices to use it. At the same time set update_irq() and
update_arg to NULL in ps2_kbd_init() and ps2_mouse_init() to ensure that any
accidental attempt to use the legacy update_irq() function will cause a NULL
pointer dereference.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-50-mark.cave-ayland@ilande.co.uk>

lasips2: add QEMU interface comment

This describes the LASI PS2 device interface implemented within QEMU.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624134109.881989-49-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

lasips2: switch over from update_irq() function to PS2 device gpio

Add a qdev gpio input in lasips2_init() by taking the existing lasips2_port_set_irq()
function, updating it accordingly and then renaming to lasips2_set_irq(). Use these
new qdev gpio inputs to wire up the PS2 keyboard and mouse devices.

At the same time set update_irq() and update_arg to NULL in ps2_kbd_init() and
ps2_mouse_init() to ensure that any accidental attempt to use the legacy update_irq()
function will cause a NULL pointer dereference.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-48-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

lasips2: use sysbus IRQ for output IRQ

This enables the IRQ to be wired up using sysbus_connect_irq() in
lasips2_initfn().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-47-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

lasips2: implement lasips2_realize()

Move ps2_kbd_init() and ps2_mouse_init() from lasips2_initfn() to lasips2_realize.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-46-mark.cave-ayland@ilande.co.uk>

lasips2: add base property

This is in preparation for handling vmstate_register() within the device.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-45-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

lasips2: move initialisation of PS2 ports from lasi_initfn() to lasi_init()

This can be improved once the ps2_kbd_init() and ps2_mouse_init() functions have
been removed, but for now move the existing logic from lasi_initfn() to
lasi_init(). At the same time explicitly set keyboard port id to 0, even if it
isn't technically required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-44-mark.cave-ayland@ilande.co.uk>

lasips2: move mapping of LASIPS2 registers to HPPA machine

Now that the register memory regions are exposed as SysBus memory regions, move
the mapping of the LASIPS2 registers from lasips2_initfn() to the HPPA machine
(which is its only user).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-43-mark.cave-ayland@ilande.co.uk>

lasips2: implement lasips2_init() function

Move the initialisation of the keyboard and mouse memory regions to lasips2_init()
and expose them as SysBus memory regions.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-42-mark.cave-ayland@ilande.co.uk>

lasips2: rename lasips2_init() to lasips2_initfn() and update it to return the LASIPS2 device

When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy LASIPS2
wrapper function. Eventually the wrapper function will be removed, but for now
rename it to lasips2_initfn() to avoid a naming collision.

At the same time update lasips2_initfn() return the LASIPS2 device so that it
can later be accessed using qdev APIs by the HPPA machine.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-41-mark.cave-ayland@ilande.co.uk>

lasips2: move lasips2 QOM types from lasips2.c to lasips2.h

This allows the QOM types in lasips2.c to be used elsewhere by simply including
lasips2.h.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-40-mark.cave-ayland@ilande.co.uk>

lasips2: QOMify LASIPS2State

Currently lasip2_init() creates a new LASIPS2State directly which is used by the HPPA
machine. Introduce a new LASIPS2 QOM type that will soon be used to allow the HPPA
machine to be wired up using standard qdev GPIOs.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-39-mark.cave-ayland@ilande.co.uk>

pl050: add QEMU interface comment

This describes the PL050 device interface implemented within QEMU.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220624134109.881989-38-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

pl050: switch over from update_irq() function to PS2 device gpio

Add a new pl050_init() function which initialises a qdev input gpio for handling
incoming PS2 IRQs, and then wire up the PS2 device to use it. At the same time
set update_irq() and update_arg to NULL in ps2_kbd_init() and ps2_mouse_init()
to ensure that any accidental attempt to use the legacy update_irq() function will
cause a NULL pointer dereference.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220624134109.881989-37-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

pckbd: replace irq_kbd and irq_mouse with qemu_irq array in KBDState

This allows both IRQs to be declared as a single qdev gpio array.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-36-mark.cave-ayland@ilande.co.uk>

ps2: add gpio for output IRQ and optionally use it in ps2_raise_irq() and ps2_lower_irq()

Define the gpio for the PS2 output IRQ in ps2_init() and add logic to optionally
use it in ps2_raise_irq() and ps2_lower_irq() if the gpio is connected. If the
gpio is not connected then call the legacy update_irq() function as before.

This allows the incremental conversion of devices from the legacy update_irq()
function to use gpios instead.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-35-mark.cave-ayland@ilande.co.uk>

ps2: introduce ps2_lower_irq() instead of calling update_irq() directly

This consolidates the logic of lowering the PS2 IRQ into one single function.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-34-mark.cave-ayland@ilande.co.uk>

ps2: use ps2_raise_irq() instead of calling update_irq() directly

This consolidates the logic of raising the PS2 IRQ into one single function.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-33-mark.cave-ayland@ilande.co.uk>

ps2: make ps2_raise_irq() function static

This function is no longer used outside of ps2.c and so can be declared static.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-32-mark.cave-ayland@ilande.co.uk>

pckbd: move ps2_kbd_init() and ps2_mouse_init() to i8042_mmio_realize()

Move ps2_kbd_init() and ps2_mouse_init() from i8042_mm_init() to
i8042_mmio_realize() to further reduce the initialisation logic done in
i8042_mm_init().

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220624134109.881989-31-mark.cave-ayland@ilande.co.uk>