irqdomain: Fix association race

commit b06730a571a9ff1ba5bd6b20bf9e50e5a12f1ec6 upstream.

The sanity check for an already mapped virq is done outside of the
irq_domain_mutex-protected section which means that an (unlikely) racing
association may not be detected.

Fix this by factoring out the association implementation, which will
also be used in a follow-on change to fix a shared-interrupt mapping
race.

Fixes: ddaf144c61da ("irqdomain: Refactor irq_domain_associate_many()")
Cc: stable@vger.kernel.org # 3.11
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Align ima_file_mmap() parameters with mmap_file LSM hook

commit 4971c268b85e1c7a734a61622fc0813c86e2362e upstream.

Commit 98de59bfe4b2f ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().

However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.

A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.

Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.

Cc: stable@vger.kernel.org
Fixes: 98de59bfe4b2 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brd: return 0/-error from brd_insert_page()

commit db0ccc44a20b4bb3039c0f6885a1f9c3323c7673 upstream.

It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.

Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/hw-vuln: Document the interaction between IBRS and STIBP

commit e02b50ca442e88122e1302d4dbc1b71a4808c13f upstream.

Explain why STIBP is needed with legacy IBRS as currently implemented
(KERNEL_IBRS) and why STIBP is not needed when enhanced IBRS is enabled.

Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227060541.1939092-2-kpsingh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Allow enabling STIBP with legacy IBRS

commit 6921ed9049bc7457f66c1596c5b78aec0dae4a9d upstream.

When plain IBRS is enabled (not enhanced IBRS), the logic in
spectre_v2_user_select_mitigation() determines that STIBP is not needed.

The IBRS bit implicitly protects against cross-thread branch target
injection. However, with legacy IBRS, the IBRS bit is cleared on
returning to userspace for performance reasons which leaves userspace
threads vulnerable to cross-thread branch target injection against which
STIBP protects.

Exclude IBRS from the spectre_v2_in_ibrs_mode() check to allow for
enabling STIBP (through seccomp/prctl() by default or always-on, if
selected by spectre_v2_user kernel cmdline parameter).

  [ bp: Massage. ]

Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Reported-by: José Oliveira <joseloliveira11@gmail.com>
Reported-by: Rodrigo Branco <rodrigo@kernelhacking.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230220120127.1975241-1-kpsingh@kernel.org
Link: https://lore.kernel.org/r/20230221184908.2349578-1-kpsingh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/AMD: Fix mixed steppings support

commit 7ff6edf4fef38ab404ee7861f257e28eaaeed35f upstream.

The AMD side of the loader has always claimed to support mixed
steppings. But somewhere along the way, it broke that by assuming that
the cached patch blob is a single one instead of it being one per
*node*.

So turn it into a per-node one so that each node can stash the blob
relevant for it.

  [ NB: Fixes tag is not really the exactly correct one but it is good
    enough. ]

Fixes: fe055896c040 ("x86/microcode: Merge the early microcode loader")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org> # 2355370cd941 ("x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter")
Cc: <stable@kernel.org> # a5ad92134bd1 ("x86/microcode/AMD: Add a @cpu parameter to the reloading functions")
Link: https://lore.kernel.org/r/20230130161709.11615-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/AMD: Add a @cpu parameter to the reloading functions

commit a5ad92134bd153a9ccdcddf09a95b088f36c3cce upstream.

Will be used in a subsequent change.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130161709.11615-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter

commit 2355370cd941cbb20882cc3f34460f9f2b8f9a18 upstream.

It is always the BSP.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130161709.11615-2-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range

commit f1c97a1b4ef709e3f066f82e3ba3108c3b133ae6 upstream.

When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.

arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.

For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:

   0xffffffff816cb5e9 <+9>:     push   %r12
   0xffffffff816cb5eb <+11>:    xor    %r12d,%r12d
   0xffffffff816cb5ee <+14>:    test   %rdi,%rdi
   0xffffffff816cb5f1 <+17>:    setne  %r12b
   0xffffffff816cb5f5 <+21>:    push   %rbp

1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
  After the optimization, "func" code changes to:

   0xffffffff816cc079 <+9>:     push   %r12
   0xffffffff816cc07b <+11>:    jmp    0xffffffffa0210000
   0xffffffff816cc080 <+16>:    incl   0xf(%rcx)
   0xffffffff816cc083 <+19>:    xchg   %eax,%ebp
   0xffffffff816cc084 <+20>:    (bad)
   0xffffffff816cc085 <+21>:    push   %rbp

Now op1->flags == KPROBE_FLAG_OPTIMATED;

2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.

register_kprobe(kp2)
  register_aggr_kprobe
    alloc_aggr_kprobe
      __prepare_optimized_kprobe
        arch_prepare_optimized_kprobe
          __recover_optprobed_insn    // copy original bytes from kp1->optinsn.copied_insn,
                                      // jump address = <func+14>

3. disable kp1:

disable_kprobe(kp1)
  __disable_kprobe
    ...
    if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
      ret = disarm_kprobe(orig_p, true)       // add op1 in unoptimizing_list, not unoptimized
      orig_p->flags |= KPROBE_FLAG_DISABLED;  // op1->flags ==  KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
    ...

4. unregister kp2
__unregister_kprobe_top
  ...
  if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
    optimize_kprobe(op)
      ...
      if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
        return;
      p->kp.flags |= KPROBE_FLAG_OPTIMIZED;   //  now op2 has KPROBE_FLAG_OPTIMIZED
  }

"func" code now is:

   0xffffffff816cc079 <+9>:     int3
   0xffffffff816cc07a <+10>:    push   %rsp
   0xffffffff816cc07b <+11>:    jmp    0xffffffffa0210000
   0xffffffff816cc080 <+16>:    incl   0xf(%rcx)
   0xffffffff816cc083 <+19>:    xchg   %eax,%ebp
   0xffffffff816cc084 <+20>:    (bad)
   0xffffffff816cc085 <+21>:    push   %rbp

5. if call "func", int3 handler call setup_detour_execution:

  if (p->flags & KPROBE_FLAG_OPTIMIZED) {
    ...
    regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
    ...
  }

The code for the destination address is

   0xffffffffa021072c:  push   %r12
   0xffffffffa021072e:  xor    %r12d,%r12d
   0xffffffffa0210731:  jmp    0xffffffff816cb5ee <func+14>

However, <func+14> is not a valid start instruction address. As a result, an error occurs.

Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Fix __recover_optprobed_insn check optimizing logic

commit 868a6fc0ca2407622d2833adefe1c4d284766c4c upstream.

Since the following commit:

  commit f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")

modified the update timing of the KPROBE_FLAG_OPTIMIZED, a optimized_kprobe
may be in the optimizing or unoptimizing state when op.kp->flags
has KPROBE_FLAG_OPTIMIZED and op->list is not empty.

The __recover_optprobed_insn check logic is incorrect, a kprobe in the
unoptimizing state may be incorrectly determined as unoptimizing.
As a result, incorrect instructions are copied.

The optprobe_queued_unopt function needs to be exported for invoking in
arch directory.

Link: https://lore.kernel.org/all/20230216034247.32348-2-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot: Disable SVM, not just VMX, when stopping CPUs

commit a2b07fa7b93321c059af0c6d492cc9a4f1e390aa upstream.

Disable SVM and more importantly force GIF=1 when halting a CPU or
rebooting the machine.  Similar to VMX, SVM allows software to block
INITs via CLGI, and thus can be problematic for a crash/reboot.  The
window for failure is smaller with SVM as INIT is only blocked while
GIF=0, i.e. between CLGI and STGI, but the window does exist.

Fixes: fba4f472b33a ("x86/reboot: Turn off KVM when halting a CPU")
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot: Disable virtualization in an emergency if SVM is supported

commit d81f952aa657b76cea381384bef1fea35c5fd266 upstream.

Disable SVM on all CPUs via NMI shootdown during an emergency reboot.
Like VMX, SVM can block INIT, e.g. if the emergency reboot is triggered
between CLGI and STGI, and thus can prevent bringing up other CPUs via
INIT-SIPI-SIPI.

Cc: stable@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/crash: Disable virt in core NMI crash handler to avoid double shootdown

commit 26044aff37a5455b19a91785086914fd33053ef4 upstream.

Disable virtualization in crash_nmi_callback() and rework the
emergency_vmx_disable_all() path to do an NMI shootdown if and only if a
shootdown has not already occurred.   NMI crash shootdown fundamentally
can't support multiple invocations as responding CPUs are deliberately
put into halt state without unblocking NMIs.  But, the emergency reboot
path doesn't have any work of its own, it simply cares about disabling
virtualization, i.e. so long as a shootdown occurred, emergency reboot
doesn't care who initiated the shootdown, or when.

If "crash_kexec_post_notifiers" is specified on the kernel command line,
panic() will invoke crash_smp_send_stop() and result in a second call to
nmi_shootdown_cpus() during native_machine_emergency_restart().

Invoke the callback _before_ disabling virtualization, as the current
VMCS needs to be cleared before doing VMXOFF.  Note, this results in a
subtle change in ordering between disabling virtualization and stopping
Intel PT on the responding CPUs.  While VMX and Intel PT do interact,
VMXOFF and writes to MSR_IA32_RTIT_CTL do not induce faults between one
another, which is all that matters when panicking.

Harden nmi_shootdown_cpus() against multiple invocations to try and
capture any such kernel bugs via a WARN instead of hanging the system
during a crash/dump, e.g. prior to the recent hardening of
register_nmi_handler(), re-registering the NMI handler would trigger a
double list_add() and hang the system if CONFIG_BUG_ON_DATA_CORRUPTION=y.

 list_add double add: new=ffffffff82220800, prev=ffffffff8221cfe8, next=ffffffff82220800.
 WARNING: CPU: 2 PID: 1319 at lib/list_debug.c:29 __list_add_valid+0x67/0x70
 Call Trace:
  __register_nmi_handler+0xcf/0x130
  nmi_shootdown_cpus+0x39/0x90
  native_machine_emergency_restart+0x1c9/0x1d0
  panic+0x237/0x29b

Extract the disabling logic to a common helper to deduplicate code, and
to prepare for doing the shootdown in the emergency reboot path if SVM
is supported.

Note, prior to commit ed72736183c4 ("x86/reboot: Force all cpus to exit
VMX root if VMX is supported"), nmi_shootdown_cpus() was subtly protected
against a second invocation by a cpu_vmx_enabled() check as the kdump
handler would disable VMX if it ran first.

Fixes: ed72736183c4 ("x86/reboot: Force all cpus to exit VMX root if VMX is supported")
Cc: stable@vger.kernel.org
Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/all/20220427224924.592546-2-gpiccoli@igalia.com
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows)

commit 6a3236580b0b1accc3976345e723104f74f6f8e6 upstream.

Set GIF=1 prior to disabling SVM to ensure that INIT is recognized if the
kernel is disabling SVM in an emergency, e.g. if the kernel is about to
jump into a crash kernel or may reboot without doing a full CPU RESET.
If GIF is left cleared, the new kernel (or firmware) will be unabled to
awaken APs.  Eat faults on STGI (due to EFER.SVME=0) as it's possible
that SVM could be disabled via NMI shootdown between reading EFER.SVME
and executing STGI.

Link: https://lore.kernel.org/all/cbcb6f35-e5d7-c1c9-4db9-fe5cc4de579a@amd.com
Cc: stable@vger.kernel.org
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130233650.1404148-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: disable migration mode when dirty tracking is disabled

commit f2d3155e2a6bac44d16f04415a321e8707d895c6 upstream.

Migration mode is a VM attribute which enables tracking of changes in
storage attributes (PGSTE). It assumes dirty tracking is enabled on all
memslots to keep a dirty bitmap of pages with changed storage attributes.

When enabling migration mode, we currently check that dirty tracking is
enabled for all memslots. However, userspace can disable dirty tracking
without disabling migration mode.

Since migration mode is pointless with dirty tracking disabled, disable
migration mode whenever userspace disables dirty tracking on any slot.

Also update the documentation to clarify that dirty tracking must be
enabled when enabling migration mode, which is already enforced by the
code in kvm_s390_vm_start_migration().

Also highlight in the documentation for KVM_S390_GET_CMMA_BITS that it
can now fail with -EINVAL when dirty tracking is disabled while
migration mode is on. Move all the error codes to a table so this stays
readable.

To disable migration mode, slots_lock should be held, which is taken
in kvm_set_memory_region() and thus held in
kvm_arch_prepare_memory_region().

Restructure the prepare code a bit so all the sanity checking is done
before disabling migration mode. This ensures migration mode isn't
disabled when some sanity check fails.

Cc: stable@vger.kernel.org
Fixes: 190df4a212a7 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230127140532.230651-2-nrb@linux.ibm.com
Message-Id: <20230127140532.230651-2-nrb@linux.ibm.com>
[frankja@linux.ibm.com: fixed commit message typo, moved api.rst error table upwards]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: hyper-v: placate modpost section mismatch error

commit 45dd9bc75d9adc9483f0c7d662ba6e73ed698a0b upstream.

modpost reports section mismatch errors/warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)

This "(unknown) (section: .init.data)" all refer to svm_x86_ops.

Tag svm_hv_hardware_setup() with __init to fix a modpost warning as the
non-stub implementation accesses __initdata (svm_x86_ops), i.e. would
generate a use-after-free if svm_hv_hardware_setup() were actually invoked
post-init.  The helper is only called from svm_hardware_setup(), which is
also __init, i.e. lack of __init is benign other than the modpost warning.

Fixes: 1e0c7d40758b ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230222073315.9081-1-rdunlap@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Fix potential overflow in SEV's send|receive_update_data()

commit f94f053aa3a5d6ff17951870483d9eb9e13de2e2 upstream.

KVM_SEV_SEND_UPDATE_DATA and KVM_SEV_RECEIVE_UPDATE_DATA have an integer
overflow issue. Params.guest_len and offset are both 32 bits wide, with a
large params.guest_len the check to confirm a page boundary is not
crossed can falsely pass:

    /* Check if we are crossing the page boundary *
    offset = params.guest_uaddr & (PAGE_SIZE - 1);
    if ((params.guest_len + offset > PAGE_SIZE))

Add an additional check to confirm that params.guest_len itself is not
greater than PAGE_SIZE.

Note, this isn't a security concern as overflow can happen if and only if
params.guest_len is greater than 0xfffff000, and the FW spec says these
commands fail with lengths greater than 16KB, i.e. the PSP will detect
KVM's goof.

Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Fixes: d3d1af85e2c7 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: Thomas Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230207171354.4012821-1-pgonda@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI

commit ba5838abb05334e4abfdff1490585c7f365e0424 upstream.

Inject a #GP if the guest attempts to set reserved bits in the x2APIC-only
Self-IPI register.  Bits 7:0 hold the vector, all other bits are reserved.

Reported-by: Marc Orr <marcorr@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Destroy target device if coalesced MMIO unregistration fails

commit b1cb1fac22abf102ffeb29dd3eeca208a3869d54 upstream.

Destroy and free the target coalesced MMIO device if unregistering said
device fails.  As clearly noted in the code, kvm_io_bus_unregister_dev()
does not destroy the target device.

  BUG: memory leak
  unreferenced object 0xffff888112a54880 (size 64):
    comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s)
    hex dump (first 32 bytes):
      38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff  8.g.....8.g.....
      e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff  .........0g.....
    backtrace:
      [<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline]
      [<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline]
      [<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150
      [<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323
      [<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline]
      [<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline]
      [<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696
      [<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713
      [<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline]
      [<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline]
      [<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
      [<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290
      [<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

  BUG: leak checking failed

Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed")
Cc: stable@vger.kernel.org
Reported-by: 柳菁峰 <liujingfeng@qianxin.com>
Reported-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20221219171924.67989-1-seanjc@google.com
Link: https://lore.kernel.org/all/20230118220003.1239032-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/siw: Fix user page pinning accounting

[ Upstream commit 65a8fc30fb6722fc25adec6d7dd5b53b0bb85820 ]

To avoid racing with other user memory reservations, immediately
account full amount of pages to be pinned.

Fixes: 2251334dcac9 ("rdma/siw: application buffer management")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20230202101000.402990-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix file corruption when appending just after end of preallocated extent

commit 36ec52ea038b18a53e198116ef7d7e70c87db046 upstream.

When we append new block just after the end of preallocated extent, the
code in inode_getblk() wrongly determined we're going to use the
preallocated extent which resulted in adding block into a wrong logical
offset in the file. Sequence like this manifests it:

xfs_io -f -c "pwrite 0x2cacf 0xd122" -c "truncate 0x2dd6f" \
  -c "pwrite 0x27fd9 0x69a9" -c "pwrite 0x32981 0x7244" <file>

The code that determined the use of preallocated extent is actually
stale because udf_do_extend_file() does not create preallocation anymore
so after calling that function we are sure there's no usable
preallocation. Just remove the faulty condition.

CC: stable@vger.kernel.org
Fixes: 16d055656814 ("udf: Discard preallocation before extending file with a hole")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Detect system inodes linked into directory hierarchy

commit 85a37983ec69cc9fcd188bc37c4de15ee326355a upstream.

When UDF filesystem is corrupted, hidden system inodes can be linked
into directory hierarchy which is an avenue for further serious
corruption of the filesystem and kernel confusion as noticed by syzbot
fuzzed images. Refuse to access system inodes linked into directory
hierarchy and vice versa.

CC: stable@vger.kernel.org
Reported-by: syzbot+38695a20b8addcbc1084@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Preserve link count of system files

commit fc8033a34a3ca7d23353e645e6dde5d364ac5f12 upstream.

System files in UDF filesystem have link count 0. To not confuse VFS we
fudge the link count to be 1 when reading such inodes however we forget
to restore the link count of 0 when writing such inodes. Fix that.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Do not update file length for failed writes to inline files

commit 256fe4162f8b5a1625b8603ca5f7ff79725bfb47 upstream.

When write to inline file fails (or happens only partly), we still
updated length of inline data as if the whole write succeeded. Fix the
update of length of inline data to happen only if the write succeeds.

Reported-by: syzbot+0937935b993956ba28ab@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Do not bother merging very long extents

commit 53cafe1d6d8ef9f93318e5bfccc0d24f27d41ced upstream.

When merging very long extents we try to push as much length as possible
to the first extent. However this is unnecessarily complicated and not
really worth the trouble. Furthermore there was a bug in the logic
resulting in corrupting extents in the file as syzbot reproducer shows.
So just don't bother with the merging of extents that are too long
together.

CC: stable@vger.kernel.org
Reported-by: syzbot+60f291a24acecb3c2bd5@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Truncate added extents on failed expansion

commit 70bfb3a8d661d4fdc742afc061b88a7f3fc9f500 upstream.

When a file expansion failed because we didn't have enough space for
indirect extents make sure we truncate extents created so far so that we
don't leave extents beyond EOF.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Test ptrace as much as possible with Yama

commit 8677e555f17f51321d0730b945aeb7d4b95f998f upstream.

Update ptrace tests according to all potential Yama security policies.
This is required to make such tests pass even if Yama is enabled.

Tests are not skipped but they now check both Landlock and Yama boundary
restrictions at run time to keep a maximum test coverage (i.e. positive
and negative testing).

Signed-off-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230114020306.1407195-2-jeffxu@google.com
Cc: stable@vger.kernel.org
[mic: Add curly braces around EXPECT_EQ() to make it build, and improve
commit message]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Skip overlayfs tests when not supported

commit 366617a69e60610912836570546f118006ebc7cb upstream.

overlayfs may be disabled in the kernel configuration, causing related
tests to fail.  Check that overlayfs is supported at runtime, so we can
skip layout2_overlay.* accordingly.

Signed-off-by: Jeff Xu <jeffxu@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230113053229.1281774-2-jeffxu@google.com
[mic: Reword comments and constify variables]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix non-auto defrag path not working issue

commit 236b9254f8d1edc273ad88b420aa85fbd84f492d upstream.

This fixes three issues on move extents ioctl without auto defrag:

a) In ocfs2_find_victim_alloc_group(), we have to convert bits to block
   first in case of global bitmap.

b) In ocfs2_probe_alloc_group(), when finding enough bits in block
   group bitmap, we have to back off move_len to start pos as well,
   otherwise it may corrupt filesystem.

c) In ocfs2_ioctl_move_extents(), set me_threshold both for non-auto
   and auto defrag paths.  Otherwise it will set move_max_hop to 0 and
   finally cause unexpectedly ENOSPC error.

Currently there are no tools triggering the above issues since
defragfs.ocfs2 enables auto defrag by default.  Tested with manually
changing defragfs.ocfs2 to run non auto defrag path.

Link: https://lkml.kernel.org/r/20230220050526.22020-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix defrag path triggering jbd2 ASSERT

commit 60eed1e3d45045623e46944ebc7c42c30a4350f0 upstream.

code path:

ocfs2_ioctl_move_extents
 ocfs2_move_extents
  ocfs2_defrag_extent
   __ocfs2_move_extent
    + ocfs2_journal_access_di
    + ocfs2_split_extent  //sub-paths call jbd2_journal_restart
    + ocfs2_journal_dirty //crash by jbs2 ASSERT

crash stacks:

PID: 11297  TASK: ffff974a676dcd00  CPU: 67  COMMAND: "defragfs.ocfs2"
 #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
 #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
 #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
 #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
    [exception RIP: jbd2_journal_dirty_metadata+0x2ba]
    RIP: ffffffffc09ca54a  RSP: ffffb25d8dad3b70  RFLAGS: 00010207
    RAX: 0000000000000000  RBX: ffff9706eedc5248  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: ffff97337029ea28  RDI: ffff9706eedc5250
    RBP: ffff9703c3520200   R8: 000000000f46b0b2   R9: 0000000000000000
    R10: 0000000000000001  R11: 00000001000000fe  R12: ffff97337029ea28
    R13: 0000000000000000  R14: ffff9703de59bf60  R15: ffff9706eedc5250
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
 #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
 #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]

Analysis

This bug has the same root cause of 'commit 7f27ec978b0e ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'.  For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.

How to fix

For ocfs2_split_extent() can handle journal operations totally by itself.
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair.  The fix method is to remove
journal access/dirty from __ocfs2_move_extent().

The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html

Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix cgroup writeback accounting with fs-layer encryption

commit 844545c51a5b2a524b22a2fe9d0b353b827d24b4 upstream.

When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), f2fs encrypts the
pagecache page into a bounce page, then writes the bounce page.

It also passes the bounce page to wbc_account_cgroup_owner().  That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.

Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().

Fixes: 578c647879f7 ("f2fs: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix information leak in f2fs_move_inline_dirents()

commit 9a5571cff4ffcfc24847df9fd545cc5799ac0ee5 upstream.

When converting an inline directory to a regular one, f2fs is leaking
uninitialized memory to disk because it doesn't initialize the entire
directory block.  Fix this by zero-initializing the block.

This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded
initializing when converting inline dentry"), which didn't consider the
security implications of leaking uninitialized memory to disk.

This was found by running xfstest generic/435 on a KMSAN-enabled kernel.

Fixes: 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry")
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: send FIN ack back in right cases

commit 00908b3388255fc1d3782b744d07f327712f401f upstream.

This patch moves to send a ack back for receiving a FIN message only
when we are in valid states. In other cases and there might be a sender
waiting for a ack we just let it timeout at the senders time and
hopefully all other cleanups will remove the FIN message on their
sending queue. As an example we should never send out an ACK being in
LAST_ACK state or we cannot assume a working socket communication when
we are in CLOSED state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: move sending fin message into state change handling

commit a58496361802070996f9bd76e941d109c4a85ebd upstream.

This patch moves the send fin handling, which should appear in a specific
state change, into the state change handling while the per node
state_lock is held. I experienced issues with other messages because
we changed the state and a fin message was sent out in a different state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: don't set stop rx flag after node reset

commit 15c63db8e86a72e0d5cfb9bf0cd1870e39a3e5fe upstream.

Similar to the stop tx flag, the rx flag should warn about a dlm message
being received at DLM_FIN state change, when we are assuming no other
dlm application messages. If we receive a FIN message and we are in the
state DLM_FIN_WAIT2 we call midcomms_node_reset() which puts the
midcomms node into DLM_CLOSED state. Afterwards we should not set the
DLM_NODE_FLAG_STOP_RX flag any more.  This patch changes the setting
DLM_NODE_FLAG_STOP_RX in those state changes when we receive a FIN
message and we assume there will be no other dlm application messages
received until we hit DLM_CLOSED state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix inode->i_blocks for non-512 byte sector size device

commit 39c1ce8eafc0ff64fb9e28536ccc7df6a8e2999d upstream.

inode->i_blocks is not real number of blocks, but 512 byte ones.

Fixes: 98d917047e8b ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: redefine DIR_DELETED as the bad cluster number

commit bdaadfd343e3cba49ad0b009ff4b148dad0fa404 upstream.

When a file or a directory is deleted, the hint for the cluster of
its parent directory in its in-memory inode is set as DIR_DELETED.
Therefore, DIR_DELETED must be one of invalid cluster numbers. According
to the exFAT specification, a volume can have at most 2^32-11 clusters.
However, DIR_DELETED is wrongly defined as 0xFFFF0321, which could be
a valid cluster number. To fix it, let's redefine DIR_DELETED as
0xFFFFFFF7, the bad cluster number.

Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix unexpected EOF while reading dir

commit 6cb5d1a16a51d080fbc1649a5144cbc5ca7d6f88 upstream.

If the position is not aligned with the dentry size, the return
value of readdir() will be NULL and errno is 0, which means the
end of the directory stream is reached.

If the position is aligned with dentry size, but there is no file
or directory at the position, exfat_readdir() will continue to
get dentry from the next dentry. So the dentry gotten by readdir()
may not be at the position.

After this commit, if the position is not aligned with the dentry
size, round the position up to the dentry size and continue to get
the dentry.

Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix reporting fs error when reading dir beyond EOF

commit 706fdcac002316893434d753be8cfb549fe1d40d upstream.

Since seekdir() does not check whether the position is valid, the
position may exceed the size of the directory. We found that for
a directory with discontinuous clusters, if the position exceeds
the size of the directory and the excess size is greater than or
equal to the cluster size, exfat_readdir() will return -EIO,
causing a file system error and making the file system unavailable.

Reproduce this bug by:

seekdir(dir, dir_size + cluster_size);
dirent = readdir(dir);

The following log will be printed if mount with 'errors=remount-ro'.

[11166.712896] exFAT-fs (sdb1): error, invalid access to FAT (entry 0xffffffff)
[11166.712905] exFAT-fs (sdb1): Filesystem has been set read-only

Fixes: 1e5654de0f51 ("exfat: handle wrong stream entry size in exfat_readdir()")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: hfsplus: fix UAF issue in hfsplus_put_super

commit 07db5e247ab5858439b14dd7cc1fe538b9efcf32 upstream.

The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.

As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.

To fix this error, we move all iput calls before hfsplus_btree_close.

Note that this patch is tested on Syzbot.

Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hfs: fix missing hfs_bnode_get() in __hfs_bnode_create

commit a9dc087fd3c484fd1ed18c5efb290efaaf44ce03 upstream.

Syzbot found a kernel BUG in hfs_bnode_put():

 kernel BUG at fs/hfs/bnode.c:466!
 invalid opcode: 0000 [#1] PREEMPT SMP KASAN
 CPU: 0 PID: 3634 Comm: kworker/u4:5 Not tainted 6.1.0-rc7-syzkaller-00190-g97ee9d1c1696 #0
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
 Workqueue: writeback wb_workfn (flush-7:0)
 RIP: 0010:hfs_bnode_put+0x46f/0x480 fs/hfs/bnode.c:466
 Code: 8a 80 ff e9 73 fe ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a0 fe ff ff 48 89 df e8 db 8a 80 ff e9 93 fe ff ff e8 a1 68 2c ff <0f> 0b e8 9a 68 2c ff 0f 0b 0f 1f 84 00 00 00 00 00 55 41 57 41 56
 RSP: 0018:ffffc90003b4f258 EFLAGS: 00010293
 RAX: ffffffff825e318f RBX: 0000000000000000 RCX: ffff8880739dd7c0
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffc90003b4f430 R08: ffffffff825e2d9b R09: ffffed10045157d1
 R10: ffffed10045157d1 R11: 1ffff110045157d0 R12: ffff8880228abe80
 R13: ffff88807016c000 R14: dffffc0000000000 R15: ffff8880228abe00
 FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fa6ebe88718 CR3: 000000001e93d000 CR4: 00000000003506f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  hfs_write_inode+0x1bc/0xb40
  write_inode fs/fs-writeback.c:1440 [inline]
  __writeback_single_inode+0x4d6/0x670 fs/fs-writeback.c:1652
  writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1878
  __writeback_inodes_wb+0x125/0x420 fs/fs-writeback.c:1949
  wb_writeback+0x440/0x7b0 fs/fs-writeback.c:2054
  wb_check_start_all fs/fs-writeback.c:2176 [inline]
  wb_do_writeback fs/fs-writeback.c:2202 [inline]
  wb_workfn+0x827/0xef0 fs/fs-writeback.c:2235
  process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
  worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
  kthread+0x266/0x300 kernel/kthread.c:376
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
  </TASK>

The BUG_ON() is triggered at here:

/* Dispose of resources used by a node */
void hfs_bnode_put(struct hfs_bnode *node)
{
if (node) {
  <skipped>
  BUG_ON(!atomic_read(&node->refcnt)); <- we have issue here!!!!
  <skipped>
  }
}

By tracing the refcnt, I found the node is created by hfs_bmap_alloc()
with refcnt 1.  Then the node is used by hfs_btree_write().  There is a
missing of hfs_bnode_get() after find the node.  The issue happened in
following path:

<alloc>
 hfs_bmap_alloc
   hfs_bnode_find
     __hfs_bnode_create   <- allocate a new node with refcnt 1.
   hfs_bnode_put          <- decrease the refcnt

<write>
 hfs_btree_write
   hfs_bnode_find
     __hfs_bnode_create
       hfs_bnode_findhash <- find the node without refcnt increased.
   hfs_bnode_put   <- trigger the BUG_ON() since refcnt is 0.

Link: https://lkml.kernel.org/r/20221212021627.3766829-1-liushixin2@huawei.com
Reported-by: syzbot+5b04b49a7ec7226c7426@syzkaller.appspotmail.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct HDMI phy compatible in Exynos4

commit af1c89ddb74f170eccd5a57001d7317560b638ea upstream.

The HDMI phy compatible was missing vendor prefix.

Fixes: ed80d4cab772 ("ARM: dts: add hdmi related nodes for exynos4 SoCs")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230125094513.155063-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length

commit fb533473d1595fe79ecb528fda1de33552b07178 upstream.

ksmbd allowed the actual frame length to be smaller than the rfc1002
length. If allowed, it is possible to allocates a large amount of memory
that can be limited by credit management and can eventually cause memory
exhaustion problem. This patch do not allow it except SMB2 Negotiate
request which will be validated when message handling proceeds.
Also, Allow a message that padded to 8byte boundary.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix wrong data area length for smb2 lock request

commit 8f8c43b125882ac14372f8dca0c8e50a59e78d79 upstream.

When turning debug mode on, The following error message from
ksmbd_smb2_check_message() is coming.

ksmbd: cli req padded more than expected. Length 112 not 88 for cmd:10 mid:14

data area length calculation for smb2 lock request in smb2_get_data_area_len() is
incorrect.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath

commit b613c7f31476c44316bfac1af7cac714b7d6bef9 upstream.

A non-first waiter can potentially spin in the for loop of
rwsem_down_write_slowpath() without sleeping but fail to acquire the
lock even if the rwsem is free if the following sequence happens:

  Non-first RT waiter    First waiter      Lock holder
  -------------------    ------------      -----------
  Acquire wait_lock
  rwsem_try_write_lock():
    Set handoff bit if RT or
      wait too long
    Set waiter->handoff_set
  Release wait_lock
                         Acquire wait_lock
                         Inherit waiter->handoff_set
                         Release wait_lock
   Clear owner
                                           Release lock
  if (waiter.handoff_set) {
    rwsem_spin_on_owner(();
    if (OWNER_NULL)
      goto trylock_again;
  }
  trylock_again:
  Acquire wait_lock
  rwsem_try_write_lock():
     if (first->handoff_set && (waiter != first))
return false;
  Release wait_lock

A non-first waiter cannot really acquire the rwsem even if it mistakenly
believes that it can spin on OWNER_NULL value. If that waiter happens
to be an RT task running on the same CPU as the first waiter, it can
block the first waiter from acquiring the rwsem leading to live lock.
Fix this problem by making sure that a non-first waiter cannot spin in
the slowpath loop without sleeping.

Fixes: d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230126003628.365092-2-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: hold block group refcount during async discard

commit 2b5463fcbdfb24e898916bcae2b1359042d26963 upstream.

Async discard does not acquire the block group reference count while it
holds a reference on the discard list. This is generally OK, as the
paths which destroy block groups tend to try to synchronize on
cancelling async discard work. However, relying on cancelling work
requires careful analysis to be sure it is safe from races with
unpinning scheduling more work.

While I am unable to find a race with unpinning in the current code for
either the unused bgs or relocation paths, I believe we have one in an
older version of auto relocation in a Meta internal build. This suggests
that this is in fact an error prone model, and could be fragile to
future changes to these bg deletion paths.

To make this ownership more clear, add a refcount for async discard. If
work is queued for a block group, its refcount should be incremented,
and when work is completed or canceled, it should be decremented.

CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix uninitialized memory read in smb3_qfs_tcon()

commit d447e794a37288ec7a080aa1b044a8d9deebbab7 upstream.

oparms was not fully initialized

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kprobes: fix current_kprobe never cleared after kprobes reenter

commit cd57953936f2213dfaccce10d20f396956222c7d upstream.

Recent test_kprobe_missed kprobes kunit test uncovers the following
problem. Once kprobe is triggered from another kprobe (kprobe reenter),
all future kprobes on this cpu are considered as kprobe reenter, thus
pre_handler and post_handler are not being called and kprobes are counted
as "missed".

Commit b9599798f953 ("[S390] kprobes: activation and deactivation")
introduced a simpler scheme for kprobes (de)activation and status
tracking by using push_kprobe/pop_kprobe, which supposed to work for
both initial kprobe entry as well as kprobe reentry and helps to avoid
handling those two cases differently. The problem is that a sequence of
calls in case of kprobes reenter:
push_kprobe() <- NULL (current_kprobe)
push_kprobe() <- kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it
to NULL. In fact push_kprobe/pop_kprobe can only store a single state
(there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but
sufficient, there is no need to have another prev_kprobe just to store
NULL. To make a simple and backportable fix simply reset "prev_kprobe"
when kprobe is poped from this "stack". No need to worry about
"kprobe_status" in this case, because its value is only checked when
current_kprobe != NULL.

Cc: stable@vger.kernel.org
Fixes: b9599798f953 ("[S390] kprobes: activation and deactivation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler

commit 42e19e6f04984088b6f9f0507c4c89a8152d9730 upstream.

Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last  enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last  enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G                 N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
 [<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
 [<00000003e3d02e82>] __might_resched+0x60a/0x668
 [<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
 [<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
 [<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
 [<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
 [<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
 [<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
 [<00000003e3ce30f8>] kthread+0x2d0/0x398
 [<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
 [<00000003e60ccada>] ret_from_fork+0xa/0x40

The reason for this error report is that kprobes handling code failed
to restore irqs.

The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep  <- original kprobe (saves kprobe_saved_imask)
enable_singlestep  <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)

There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.

Cc: stable@vger.kernel.org
Fixes: 4ba069b802c2 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: discard .interp section

commit e9c9cb90e76ffaabcc7ca8f275d9e82195fd6367 upstream.

When debugging vmlinux with QEMU + GDB, the following GDB error may
occur:

    (gdb) c
    Continuing.
    Warning:
    Cannot insert breakpoint -1.
    Cannot access memory at address 0xffffffffffff95c0

    Command aborted.
    (gdb)

The reason is that, when .interp section is present, GDB tries to
locate the file specified in it in memory and put a number of
breakpoints there (see enable_break() function in gdb/solib-svr4.c).
Sometimes GDB finds a bogus location that matches its heuristics,
fails to set a breakpoint and stops. This makes further debugging
impossible.

The .interp section contains misleading information anyway (vmlinux
does not need ld.so), so fix by discarding it.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/extmem: return correct segment type in __segment_load()

commit 8c42dd78df148c90e48efff204cce38743906a79 upstream.

Commit f05f62d04271f ("s390/vmem: get rid of memory segment list")
reshuffled the call to vmem_add_mapping() in __segment_load(), which now
overwrites rc after it was set to contain the segment type code.

As result, __segment_load() will now always return 0 on success, which
corresponds to the segment type code SEG_TYPE_SW, i.e. a writeable
segment. This results in a kernel crash when loading a read-only segment
as dcssblk block device, and trying to write to it.

Instead of reshuffling code again, make sure to return the segment type
on success, and also describe this rather delicate and unexpected logic
in the function comment. Also initialize new segtype variable with
invalid value, to prevent possible future confusion.

Fixes: f05f62d04271 ("s390/vmem: get rid of memory segment list")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi_ssif: Rename idle state and check

commit 8230831c43a328c2be6d28c65d3f77e14c59986b upstream.

Rename the SSIF_IDLE() to IS_SSIF_IDLE(), since that is more clear, and
rename SSIF_NORMAL to SSIF_IDLE, since that's more accurate.

Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi:ssif: resend_msg() cannot fail

commit 95767ed78a181d5404202627499f9cde56053b96 upstream.

The resend_msg() function cannot fail, but there was error handling
around using it.  Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.

Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pm8xxx: fix set-alarm race

commit c88db0eff9722fc2b6c4d172a50471d20e08ecc6 upstream.

Make sure to disable the alarm before updating the four alarm time
registers to avoid spurious alarms during the update.

Note that the disable needs to be done outside of the ctrl_reg_lock
section to prevent a racing alarm interrupt from disabling the newly set
alarm when the lock is released.

Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Cc: stable@vger.kernel.org # 3.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20230202155448.6715-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: don't allow multiple bios for IOCB_NOWAIT issue

commit 67d59247d4b52c917e373f05a807027756ab216f upstream.

If we're doing a large IO request which needs to be split into multiple
bios for issue, then we can run into the same situation as the below
marked commit fixes - parts will complete just fine, one or more parts
will fail to allocate a request. This will result in a partially
completed read or write request, where the caller gets EAGAIN even though
parts of the IO completed just fine.

Do the same for large bios as we do for splits - fail a NOWAIT request
with EAGAIN. This isn't technically fixing an issue in the below marked
patch, but for stable purposes, we should have either none of them or
both.

This depends on: 613b14884b85 ("block: handle bio_split_to_limits() NULL return")

Cc: stable@vger.kernel.org # 5.15+
Fixes: 9cea62b2cbab ("block: don't allow splitting of a REQ_NOWAIT bio")
Link: https://github.com/axboe/liburing/issues/766
Reported-and-tested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: coreboot: framebuffer: Ignore reserved pixel color bits

commit e6acaf25cba14661211bb72181c35dd13b24f5b3 upstream.

The coreboot framebuffer doesn't support transparency, its 'reserved'
bit field is merely padding for byte/word alignment of pixel colors [1].
When trying to match the framebuffer to a simplefb format, the kernel
driver unnecessarily requires the format's transparency bit field to
exactly match this padding, even if the former is zero-width.

Due to a coreboot bug [2] (fixed upstream), some boards misreport the
reserved field's size as equal to its position (0x18 for both on a
'Lick' Chromebook), and the driver fails to probe where it would have
otherwise worked fine with e.g. the a8r8g8b8 or x8r8g8b8 formats.

Remove the transparency comparison with reserved bits. When the
bits-per-pixel and other color components match, transparency will
already be in a subset of the reserved field. Not forcing it to match
reserved bits allows the driver to work on the boards which misreport
the reserved field. It also enables using simplefb formats that don't
have transparency bits, although this doesn't currently happen due to
format support and ordering in linux/platform_data/simplefb.h.

[1] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.19/src/commonlib/include/commonlib/coreboot_tables.h#255
[2] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.13/src/drivers/intel/fsp2_0/graphics.c#82

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230122190433.195941-1-alpernebiyasak@gmail.com
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu

commit c6015bf3ff1ffb3caa27eb913797438a0fc634a0 upstream.

Fixing transmission failure which results in
"authentication with ... timed out". This can be
fixed by disable the REG_TXPAUSE.

Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217030659.12577-1-JunASAKA@zzy040330.moe
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/shmem-helper: Revert accidental non-GPL export

[ Upstream commit 047a754558d640eaa080fce3b22ca9f3d4e04626 ]

The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(),
but in the process it accidentally changed the export type from GPL to
non-GPL. Switch it back to GPL.

Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: zero out pointers after putting nfsd_files on COPY setup error

[ Upstream commit 1f0001d43d0c0ac2a19a34a914f6595ad97cbc1d ]

At first, I thought this might be a source of nfsd_file overputs, but
the current callers seem to avoid an extra put when nfsd4_verify_copy
returns an error.

Still, it's "bad form" to leave the pointers filled out when we don't
have a reference to them anymore, and that might lead to bugs later.
Zero them out as a defensive coding measure.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm cache: add cond_resched() to various workqueue loops

[ Upstream commit 76227f6dc805e9e960128bcc6276647361e0827c ]

Otherwise on resource constrained systems these workqueues may be too
greedy.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm thin: add cond_resched() to various workqueue loops

[ Upstream commit e4f80303c2353952e6e980b23914e4214487f2a6 ]

Otherwise on resource constrained systems these workqueues may be too
greedy.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5

[ Upstream commit 38b2d8efd03d2e56431b611e3523f0158306451d ]

Another Lenovo convertable where the panel is installed landscape but is
reported to the kernel as portrait.

Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230214164659.3583-1-darrell.kavanagh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Don't restart communication if not necessary

[ Upstream commit 498ba20690357691103de0f766960355247c78be ]

Don't stop and restart communication with the device unless we need to
modify the connect flags used because of a device quirk.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230125121723.3122-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: snic: Fix memory leak with using debugfs_lookup()

[ Upstream commit ad0e4e2fab928477f74d742e6e77d79245d3d3e7 ]

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.

Link: https://lore.kernel.org/r/20230202141009.2290380-1-gregkh@linuxfoundation.org
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: at91: use devm_kasprintf() to avoid potential leaks

[ Upstream commit 1c4e5c470a56f7f7c649c0c70e603abc1eab15c4 ]

Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality thus
there is no need for fixes tag.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203132714.1931596-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (coretemp) Simplify platform device handling

[ Upstream commit 6d03bbff456befeccdd4d663177c4d6c75d0c4ff ]

Coretemp's platform driver is unconventional. All the real work is done
globally by the initcall and CPU hotplug notifiers, while the "driver"
effectively just wraps an allocation and the registration of the hwmon
interface in a long-winded round-trip through the driver core.  The whole
logic of dynamically creating and destroying platform devices to bring
the interfaces up and down is error prone, since it assumes
platform_device_add() will synchronously bind the driver and set drvdata
before it returns, thus results in a NULL dereference if drivers_autoprobe
is turned off for the platform bus. Furthermore, the unusual approach of
doing that from within a CPU hotplug notifier, already commented in the
code that it deadlocks suspend, also causes lockdep issues for other
drivers or subsystems which may want to legitimately register a CPU
hotplug notifier from a platform bus notifier.

All of these issues can be solved by ripping this unusual behaviour out
completely, simply tying the platform devices to the lifetime of the
module itself, and directly managing the hwmon interfaces from the
hotplug notifiers. There is a slight user-visible change in that
/sys/bus/platform/drivers/coretemp will no longer appear, and
/sys/devices/platform/coretemp.n will remain present if package n is
hotplugged off, but hwmon users should really only be looking for the
presence of the hwmon interfaces, whose behaviour remains unchanged.

Link: https://lore.kernel.org/lkml/20220922101036.87457-1-janusz.krzysztofik@linux.intel.com/
Link: https://gitlab.freedesktop.org/drm/intel/issues/6641
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://lore.kernel.org/r/20230103114620.15319-1-janusz.krzysztofik@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Improve gfs2_make_fs_rw error handling

[ Upstream commit b66f723bb552ad59c2acb5d45ea45c890f84498b ]

In gfs2_make_fs_rw(), make sure to call gfs2_consist() to report an
inconsistency and mark the filesystem as withdrawn when
gfs2_find_jhead() fails.

At the end of gfs2_make_fs_rw(), when we discover that the filesystem
has been withdrawn, make sure we report an error.  This also replaces
the gfs2_withdrawn() check after gfs2_find_jhead().

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: syzbot+f51cb4b9afbd87ec06f2@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: s5m8767: Bounds check id indexing into arrays

[ Upstream commit e314e15a0b58f9d051c00b25951073bcdae61953 ]

The compiler has no way to know if "id" is within the array bounds of
the regulators array. Add a check for this and a build-time check that
the regulators and reg_voltage_map arrays are sized the same. Seen with
GCC 13:

../drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe':
../drivers/regulator/s5m8767.c:936:35: warning: array subscript [0, 36] is outside array bounds of 'struct regulator_desc[37]' [-Warray-bounds=]
  936 |                         regulators[id].vsel_reg =
      |                         ~~~~~~~~~~^~~~

Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230128005358.never.313-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: max77802: Bounds check regulator id against opmode

[ Upstream commit 4fd8bcec5fd7c0d586206fa2f42bd67b06cdaa7e ]

Explicitly bounds-check the id before accessing the opmode array. Seen
with GCC 13:

../drivers/regulator/max77802-regulator.c: In function 'max77802_enable':
../drivers/regulator/max77802-regulator.c:217:29: warning: array subscript [0, 41] is outside array bounds of 'unsigned int[42]' [-Warray-bounds=]
  217 |         if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
      |             ~~~~~~~~~~~~~~~~^~~~
../drivers/regulator/max77802-regulator.c:62:22: note: while referencing 'opmode'
   62 |         unsigned int opmode[MAX77802_REG_MAX];
      |                      ^~~~~~

Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230127225203.never.864-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: kirkwood: Iterate over array indexes instead of using pointer math

[ Upstream commit b3bcedc0402fcdc5c8624c433562d9d1882749d8 ]

Walking the dram->cs array was seen as accesses beyond the first array
item by the compiler. Instead, use the array index directly. This allows
for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen
with GCC 13 with -fstrict-flex-arrays:

../sound/soc/kirkwood/kirkwood-dma.c: In function
'kirkwood_dma_conf_mbus_windows.constprop':
../sound/soc/kirkwood/kirkwood-dma.c:90:24: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=]
   90 |                 if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
      |                      ~~^~~~~~

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230127224128.never.410-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-compress: Reposition and add pcm_mutex

[ Upstream commit aa9ff6a4955fdba02b54fbc4386db876603703b7 ]

If panic_on_warn is set and compress stream(DPCM) is started,
then kernel panic occurred because card->pcm_mutex isn't held appropriately.
In the following functions, warning were issued at this line
"snd_soc_dpcm_mutex_assert_held".

static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe,
struct snd_soc_pcm_runtime *be, int stream)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}

void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}

void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd,
    int stream, int action)
{
...
snd_soc_dpcm_mutex_assert_held(rtd);
...
}

int dpcm_dapm_stream_event(struct snd_soc_pcm_runtime *fe, int dir,
int event)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}

These functions are called by soc_compr_set_params_fe, soc_compr_open_fe
and soc_compr_free_fe
without pcm_mutex locking. And this is call stack.

[  414.527841][ T2179] pc : dpcm_process_paths+0x5a4/0x750
[  414.527848][ T2179] lr : dpcm_process_paths+0x37c/0x750
[  414.527945][ T2179] Call trace:
[  414.527949][ T2179]  dpcm_process_paths+0x5a4/0x750
[  414.527955][ T2179]  soc_compr_open_fe+0xb0/0x2cc
[  414.527972][ T2179]  snd_compr_open+0x180/0x248
[  414.527981][ T2179]  snd_open+0x15c/0x194
[  414.528003][ T2179]  chrdev_open+0x1b0/0x220
[  414.528023][ T2179]  do_dentry_open+0x30c/0x594
[  414.528045][ T2179]  vfs_open+0x34/0x44
[  414.528053][ T2179]  path_openat+0x914/0xb08
[  414.528062][ T2179]  do_filp_open+0xc0/0x170
[  414.528068][ T2179]  do_sys_openat2+0x94/0x18c
[  414.528076][ T2179]  __arm64_sys_openat+0x78/0xa4
[  414.528084][ T2179]  invoke_syscall+0x48/0x10c
[  414.528094][ T2179]  el0_svc_common+0xbc/0x104
[  414.528099][ T2179]  do_el0_svc+0x34/0xd8
[  414.528103][ T2179]  el0_svc+0x34/0xc4
[  414.528125][ T2179]  el0t_64_sync_handler+0x8c/0xfc
[  414.528133][ T2179]  el0t_64_sync+0x1a0/0x1a4
[  414.528142][ T2179] Kernel panic - not syncing: panic_on_warn set ...

So, I reposition and add pcm_mutex to resolve lockdep error.

Signed-off-by: Shinhyung Kang <s47.kang@samsung.com>
Link: https://lore.kernel.org/r/016401d90ac4$7b6848c0$7238da40$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

docs/scripts/gdb: add necessary make scripts_gdb step

[ Upstream commit 6b219431037bf98c9efd49716aea9b68440477a3 ]

In order to debug the kernel successfully with gdb you need to run
'make scripts_gdb' nowadays.

This was changed with the following commit:

Commit 67274c083438340ad16c ("scripts/gdb: delay generation of gdb
constants.py")

In order to have a complete guide for beginners this remark
should be added to the offial documentation.

Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Link: https://lore.kernel.org/r/20230112-documentation-gdb-v2-1-292785c43dc9@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Add missing check for alloc_ordered_workqueue

[ Upstream commit 115906ca7b535afb1fe7b5406c566ccd3873f82b ]

Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference.

Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/517646/
Link: https://lore.kernel.org/r/20230110021651.12770-1-jiasheng@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: amd: display: Fix memory leakage

[ Upstream commit 6b8701be1f66064ca72733c5f6e13748cdbf8397 ]

This commit fixes memory leakage in dc_construct_ctx() function.

Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "fbcon: don't lose the console font across generic->chip driver switch"

[ Upstream commit 12d5796d55f9fd9e4b621003127c99e176665064 ]

This reverts commit ae1287865f5361fa138d4d3b1b6277908b54eac9.

Always free the console font when deinitializing the framebuffer
console. Subsequent framebuffer consoles will then use the default
font. Rely on userspace to load any user-configured font for these
consoles.

Commit ae1287865f53 ("fbcon: don't lose the console font across
generic->chip driver switch") was introduced to work around losing
the font during graphics-device handover. [1][2] It kept a dangling
pointer with the font data between loading the two consoles, which is
fairly adventurous hack. It also never covered cases when the other
consoles, such as VGA text mode, where involved.

The problem has meanwhile been solved in userspace. Systemd comes
with a udev rule that re-installs the configured font when a console
comes up. [3] So the kernel workaround can be removed.

This also removes one of the two special cases triggered by setting
FBINFO_MISC_FIRMWARE in an fbdev driver.

Tested during device handover from efifb and simpledrm to radeon. Udev
reloads the configured console font for the new driver's terminal.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=892340
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1074624
Link: https://cgit.freedesktop.org/systemd/systemd/tree/src/vconsole/90-vconsole.rules.in?h=v222
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219160516.23436-3-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write

[ Upstream commit 21681b81b9ae548c5dae7ae00d931197a27f480c ]

During the sysfs firmware write process, a use-after-free read warning is
logged from the lpfc_wr_object() routine:

  BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc]
  Use-after-free read at 0x0000000000cf164d (in kfence-#111):
  lpfc_wr_object+0x235/0x310 [lpfc]
  lpfc_write_firmware.cold+0x206/0x30d [lpfc]
  lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc]
  lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc]
  kernfs_fop_write_iter+0x121/0x1b0
  new_sync_write+0x11c/0x1b0
  vfs_write+0x1ef/0x280
  ksys_write+0x5f/0xe0
  do_syscall_64+0x59/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

The driver accessed wr_object pointer data, which was initialized into
mailbox payload memory, after the mailbox object was released back to the
mailbox pool.

Fix by moving the mailbox free calls to the end of the routine ensuring
that we don't reference internal mailbox memory after release.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: free iio for atombios when driver shutdown

[ Upstream commit 4773fadedca918faec443daaca5e4ea1c0ced144 ]

Fix below kmemleak when unload radeon driver:

unreferenced object 0xffff9f8608ede200 (size 512):
  comm "systemd-udevd", pid 326, jiffies 4294682822 (age 716.338s)
  hex dump (first 32 bytes):
    00 00 00 00 c4 aa ec aa 14 ab 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000062fadebe>] kmem_cache_alloc_trace+0x2f1/0x500
    [<00000000b6883cea>] atom_parse+0x117/0x230 [radeon]
    [<00000000158c23fd>] radeon_atombios_init+0xab/0x170 [radeon]
    [<00000000683f672e>] si_init+0x57/0x750 [radeon]
    [<00000000566cc31f>] radeon_device_init+0x559/0x9c0 [radeon]
    [<0000000046efabb3>] radeon_driver_load_kms+0xc1/0x1a0 [radeon]
    [<00000000b5155064>] drm_dev_register+0xdd/0x1d0
    [<0000000045fec835>] radeon_pci_probe+0xbd/0x100 [radeon]
    [<00000000e69ecca3>] pci_device_probe+0xe1/0x160
    [<0000000019484b76>] really_probe.part.0+0xc1/0x2c0
    [<000000003f2649da>] __driver_probe_device+0x96/0x130
    [<00000000231c5bb1>] driver_probe_device+0x24/0xf0
    [<0000000000a42377>] __driver_attach+0x77/0x190
    [<00000000d7574da6>] bus_for_each_dev+0x7f/0xd0
    [<00000000633166d2>] driver_attach+0x1e/0x30
    [<00000000313b05b8>] bus_add_driver+0x12c/0x1e0

iio was allocated in atom_index_iio() called by atom_parse(),
but it doesn't got released when the dirver is shutdown.
Fix this kmemleak by free it in radeon_atombios_fini().

Signed-off-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tiny: ili9486: Do not assume 8-bit only SPI controllers

[ Upstream commit 77772e607522daa61f3af74df018559db75c43d6 ]

The pixel data for the ILI9486 is always 16-bits wide and it must be
sent over the SPI bus. When the controller is only able to deal with
8-bit transfers, this 16-bits data needs to be swapped before the
sending to account for the big endian bus, this is on the contrary not
needed when the SPI controller already supports 16-bits transfers.

The decision about swapping the pixel data or not is taken in the MIPI
DBI code by probing the controller capabilities: if the controller only
suppors 8-bit transfers the data is swapped, otherwise it is not.

This swapping/non-swapping is relying on the assumption that when the
controller does support 16-bit transactions then the data is sent
unswapped in 16-bits-per-word over SPI.

The problem with the ILI9486 driver is that it is forcing 8-bit
transactions also for controllers supporting 16-bits, violating the
assumption and corrupting the pixel data.

Align the driver to what is done in the MIPI DBI code by adjusting the
transfer size to the maximum allowed by the SPI controller.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-2-f86b4463b9e4@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Add Mapping for System Microphone Mute

[ Upstream commit 2d60f9f4f26785a00273cb81fe60eff129ebd449 ]

HUTRR110 added a new usage code for a key that is supposed to
mute/unmute microphone system-wide.

Map the new usage code(0x01 0xa9) to keycode KEY_MICMUTE.
Additionally hid-debug is adjusted to recognize this keycode as well.

Signed-off-by: Jingyuan Liang <jingyliang@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/omap: dsi: Fix excessive stack usage

[ Upstream commit cfca78971b9233aef0891507a98fba62046d4542 ]

dsi_dump_dsi_irqs(), a function used for debugfs prints, has a large
struct in its frame, which can result in:

drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As the performance of the function is of no concern, let's allocate the
struct with kmalloc instead.

Compile-tested only.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-1-tomi.valkeinen@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix potential null-deref in dm_resume

[ Upstream commit 7a7175a2cd84b7874bebbf8e59f134557a34161b ]

[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null

[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write

[ Upstream commit 639f6ad6df7f47db48b59956b469a6917a136afb ]

[WHY]
It causes regression AMD source will not write DPCD 340.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scm: add user copy checks to put_cmsg()

[ Upstream commit 5f1eb1ff58ea122e24adf0bc940f268ed2227462 ]

This is a followup of commit 2558b8039d05 ("net: use a bounce
buffer for copying skb->mark")

x86 and powerpc define user_access_begin, meaning
that they are not able to perform user copy checks
when using user_write_access_begin() / unsafe_copy_to_user()
and friends [1]

Instead of waiting bugs to trigger on other arches,
add a check_object_size() in put_cmsg() to make sure
that new code tested on x86 with CONFIG_HARDENED_USERCOPY=y
will perform more security checks.

[1] We can not generically call check_object_size() from
unsafe_copy_to_user() because UACCESS is enabled at this point.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_netvsc: Check status in SEND_RNDIS_PKT completion message

[ Upstream commit dca5161f9bd052e9e73be90716ffd57e8762c697 ]

Completion responses to SEND_RNDIS_PKT messages are currently processed
regardless of the status in the response, so that resources associated
with the request are freed.  While this is appropriate, code bugs that
cause sending a malformed message, or errors on the Hyper-V host, go
undetected. Fix this by checking the status and outputting a rate-limited
message if there is an error.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1676264881-48928-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE

[ Upstream commit 1eec3b95b5ce7fb2cdd273ac4f8b24b1ed6776a1 ]

This patch adds VID:PID 13d3:3529 to the btusb.c file.

This VID:PID is found in the Realtek RTL8821CE module
(M.2 module AW-CB304NF on an ASUS E210MA laptop)

Output of /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3529 Rev= 1.10
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Moises Cardona <moisesmcardona@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: EM: fix memory leak with using debugfs_lookup()

[ Upstream commit a0e8c13ccd6a9a636d27353da62c2410c4eca337 ]

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: domains: fix memory leak with using debugfs_lookup()

[ Upstream commit 0b6200e1e9f53dabdc30d0f6c51af9a5f664d32b ]

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

time/debug: Fix memory leak with using debugfs_lookup()

[ Upstream commit 5b268d8abaec6cbd4bd70d062e769098d96670aa ]

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230202151214.2306822-1-gregkh@linuxfoundation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/idle: mark arch_cpu_idle() noinstr

[ Upstream commit a9cbc1b471d291c865907542394f1c483b93a811 ]

linux-next commit ("cpuidle: tracing: Warn about !rcu_is_watching()")
adds a new warning which hits on s390's arch_cpu_idle() function:

RCU not on for: arch_cpu_idle+0x0/0x28
WARNING: CPU: 2 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x24c/0x258
Modules linked in:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.2.0-rc6-next-20230202 #4
Hardware name: IBM 8561 T01 703 (z/VM 7.3.0)
Krnl PSW : 0404d00180000000 00000000002b55c0 (arch_ftrace_ops_list_func+0x250/0x258)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: c0000000ffffbfff 0000000080000002 0000000000000026 0000000000000000
           0000037ffffe3a28 0000037ffffe3a20 0000000000000000 0000000000000000
           0000000000000000 0000000000f4acf6 00000000001044f0 0000037ffffe3cb0
           0000000000000000 0000000000000000 00000000002b55bc 0000037ffffe3bb8
Krnl Code: 00000000002b55b0: c02000840051        larl    %r2,0000000001335652
           00000000002b55b6: c0e5fff512d1        brasl   %r14,0000000000157b58
          #00000000002b55bc: af000000            mc      0,0
          >00000000002b55c0: a7f4ffe7            brc     15,00000000002b558e
           00000000002b55c4: 0707                bcr     0,%r7
           00000000002b55c6: 0707                bcr     0,%r7
           00000000002b55c8: eb6ff0480024        stmg    %r6,%r15,72(%r15)
           00000000002b55ce: b90400ef            lgr     %r14,%r15
Call Trace:
 [<00000000002b55c0>] arch_ftrace_ops_list_func+0x250/0x258
([<00000000002b55bc>] arch_ftrace_ops_list_func+0x24c/0x258)
 [<0000000000f5f0fc>] ftrace_common+0x1c/0x20
 [<00000000001044f6>] arch_cpu_idle+0x6/0x28
 [<0000000000f4acf6>] default_idle_call+0x76/0x128
 [<00000000001cc374>] do_idle+0xf4/0x1b0
 [<00000000001cc6ce>] cpu_startup_entry+0x36/0x40
 [<0000000000119d00>] smp_start_secondary+0x140/0x150
 [<0000000000f5d2ae>] restart_int_handler+0x6e/0x90

Mark arch_cpu_idle() noinstr like all other architectures with
CONFIG_ARCH_WANTS_NO_INSTR (should) have it to fix this.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uaccess: Add minimum bounds check on kernel buffer size

[ Upstream commit 04ffde1319a715bd0550ded3580d4ea3bc003776 ]

While there is logic about the difference between ksize and usize,
copy_struct_from_user() didn't check the size of the destination buffer
(when it was known) against ksize. Add this check so there is an upper
bounds check on the possible memset() call, otherwise lower bounds
checks made by callers will trigger bounds warnings under -Warray-bounds.
Seen under GCC 13:

In function 'copy_struct_from_user',
    inlined from 'iommufd_fops_ioctl' at
../drivers/iommu/iommufd/main.c:333:8:
../include/linux/fortify-string.h:59:33: warning: '__builtin_memset' offset [57, 4294967294] is out of the bounds [0, 56] of object 'buf' with type 'union ucmd_buffer' [-Warray-bounds=]
   59 | #define __underlying_memset     __builtin_memset
      |                                 ^
../include/linux/fortify-string.h:453:9: note: in expansion of macro '__underlying_memset'
  453 |         __underlying_memset(p, c, __fortify_size); \
      |         ^~~~~~~~~~~~~~~~~~~
../include/linux/fortify-string.h:461:25: note: in expansion of macro '__fortify_memset_chk'
  461 | #define memset(p, c, s) __fortify_memset_chk(p, c, s, \
      |                         ^~~~~~~~~~~~~~~~~~~~
../include/linux/uaccess.h:334:17: note: in expansion of macro 'memset'
  334 |                 memset(dst + size, 0, rest);
      |                 ^~~~~~
../drivers/iommu/iommufd/main.c: In function 'iommufd_fops_ioctl':
../drivers/iommu/iommufd/main.c:311:27: note: 'buf' declared here
  311 |         union ucmd_buffer buf;
      |                           ^~~

Cc: Christian Brauner <brauner@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexander Potapenko <glider@google.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20230203193523.never.667-kees@kernel.org/
Signed-off-by: Sasha Levin <sashal@kernel.org>

coda: Avoid partial allocation of sig_inputArgs

[ Upstream commit 48df133578c70185a95a49390d42df1996ddba2a ]

GCC does not like having a partially allocated object, since it cannot
reason about it for bounds checking when it is passed to other code.
Instead, fully allocate sig_inputArgs. (Alternatively, sig_inputArgs
should be defined as a struct coda_in_hdr, if it is actually not using
any other part of the union.) Seen under GCC 13:

../fs/coda/upcall.c: In function 'coda_upcall':
../fs/coda/upcall.c:801:22: warning: array subscript 'union inputArgs[0]' is partly outside array bounds of 'unsigned char[20]' [-Warray-bounds=]
  801 |         sig_inputArgs->ih.opcode = CODA_SIGNAL;
      |                      ^~

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: coda@cs.cmu.edu
Cc: codalist@coda.cs.cmu.edu
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230127223921.never.882-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fw_tracer: Fix debug print

[ Upstream commit 988c2352273997a242f15c4fc3711773515006a2 ]

The debug message specify tdsn, but takes as an argument the
tmsn. The correct argument is tmsn, hence, fix the print.

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Fix Lenovo Ideapad Z570 DMI match

[ Upstream commit 2d11eae42d52a131f06061015e49dc0f085c5bfc ]

Multiple Ideapad Z570 variants need acpi_backlight=native to force native
use on these pre Windows 8 machines since acpi_video backlight control
does not work here.

The original DMI quirk matches on a product_name of "102434U" but other
variants may have different product_name-s such as e.g. "1024D9U".

Move to checking product_version instead as is more or less standard for
Lenovo DMI quirks for similar reasons.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup

[ Upstream commit 1b88b47e898edef0e56e3a2f4e49f052a136153d ]

Free rx_head skb in mt76_dma_rx_cleanup routine in order to avoid
possible memory leak at module unload.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power/x86/intel-speed-select: Add Emerald Rapid quirk

[ Upstream commit 61f9fdcdcd01f9a996b6db4e7092fcdfe8414ad5 ]

Need memory frequency quirk as Sapphire Rapids in Emerald Rapids.
So add Emerald Rapids CPU model check in is_spr_platform().

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject, changelog and code edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj()

[ Upstream commit dac7f50a45216d652887fb92d6cd3b7ca7f006ea ]

static analyzer detect null pointer dereference case for 'type'
function __nft_obj_type_get() can return NULL value which require to handle
if type is NULL pointer return -ENOENT.

This is a theoretical issue, since an existing object has a type, but
better add this failsafe check.

Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: Check syscall_trace_enter() return code

[ Upstream commit 2ca8a1de4437f21562e57f9ac123914747a8e7a1 ]

Check return code of syscall_trace_enter(), and skip syscall
if -1. Return code will be left at what had been set by
ptrace or seccomp (in regs->d0).

No regression seen in testing with strace on ARAnyM.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-2-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: Add a check for oversized packets

[ Upstream commit 5c0862c2c962052ed5055220a00ac1cefb92fbcd ]

Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon: Wipe entire pool on error

[ Upstream commit aa85923a954e7704bc9d3847dabeb8540aa98d13 ]

To work around a Clang __builtin_object_size bug that shows up under
CONFIG_FORTIFY_SOURCE and UBSAN_BOUNDS, move the per-loop-iteration
mem_block wipe into a single wipe of the entire pool structure after
the loop.

Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1780
Cc: Weili Qian <qianweili@huawei.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://lore.kernel.org/r/20230106041945.never.831-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource: Suspend the watchdog temporarily when high read latency detected

[ Upstream commit b7082cdfc464bf9231300605d03eebf943dda307 ]

Bugs have been reported on 8 sockets x86 machines in which the TSC was
wrongly disabled when the system is under heavy workload.

 [ 818.380354] clocksource: timekeeping watchdog on CPU336: hpet wd-wd read-back delay of 1203520ns
 [ 818.436160] clocksource: wd-tsc-wd read-back delay of 181880ns, clock-skew test skipped!
 [ 819.402962] clocksource: timekeeping watchdog on CPU338: hpet wd-wd read-back delay of 324000ns
 [ 819.448036] clocksource: wd-tsc-wd read-back delay of 337240ns, clock-skew test skipped!
 [ 819.880863] clocksource: timekeeping watchdog on CPU339: hpet read-back delay of 150280ns, attempt 3, marking unstable
 [ 819.936243] tsc: Marking TSC unstable due to clocksource watchdog
 [ 820.068173] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
 [ 820.092382] sched_clock: Marking unstable (818769414384, 1195404998)
 [ 820.643627] clocksource: Checking clocksource tsc synchronization from CPU 267 to CPUs 0,4,25,70,126,430,557,564.
 [ 821.067990] clocksource: Switched to clocksource hpet

This can be reproduced by running memory intensive 'stream' tests,
or some of the stress-ng subcases such as 'ioport'.

The reason for these issues is the when system is under heavy load, the
read latency of the clocksources can be very high.  Even lightweight TSC
reads can show high latencies, and latencies are much worse for external
clocksources such as HPET or the APIC PM timer.  These latencies can
result in false-positive clocksource-unstable determinations.

These issues were initially reported by a customer running on a production
system, and this problem was reproduced on several generations of Xeon
servers, especially when running the stress-ng test.  These Xeon servers
were not production systems, but they did have the latest steppings
and firmware.

Given that the clocksource watchdog is a continual diagnostic check with
frequency of twice a second, there is no need to rush it when the system
is under heavy load.  Therefore, when high clocksource read latencies
are detected, suspend the watchdog timer for 5 minutes.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>