arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow

The external output reset signal was originally disabled and sent from
firmware. However, an unfixed bug in the firmware on tomato prevents
the signal from being sent, causing the device to fail to boot. To fix
this, enable external output reset signal to allow the device to reboot
normally.

Fixes: 5eb2e303ec6b ("arm64: dts: mediatek: Introduce MT8195 Cherry platform's Tomato")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240124-send-upstream-v3-1-5097c9862a73@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mt7986: add port@5 as CPU port

On MediaTek MT7986b RFB and MediaTek MT7986a RFB, port 5 of the MT7531
switch is connected to the second MAC of the SoC as a CPU port. Add the
port and set up the second MAC on the bindings.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240219-for-mediatek-v1-2-7078f23eab82@arinc9.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mt7622: add port@5 as CPU port

On Banana Pi BPI-R64 and MediaTek MT7622 RFB1 board, port 5 of the MT7531
switch is connected to the second MAC of the SoC as a CPU port. Add the
port and set up the second MAC on the bindings.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240219-for-mediatek-v1-1-7078f23eab82@arinc9.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties

Use id-gpios and vbus-gpios instead.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215093214.796821-3-alexander.stein@ew.tq-group.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: replace underscores in node names

Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240213144626.341463-1-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers

The mtu3 usb controllers don't list the xhci clock, though they require
it, and thus rely on the bootloader leaving it on in order to work.

When booting with the upstream arm64 defconfig, the usb controllers will
defer probe until modules have loaded since they have an indirect
dependency on CONFIG_MTK_CMDQ, which is configured as a module. However
at the point where modules are loaded, unused clocks are also disabled,
causing the usb controllers to probe without the xhci clock enabled and
fail to probe:

mtu3 11201000.usb: clks of sts1 are not stable!
mtu3 11201000.usb: device enable failed -110
mtu3 11201000.usb: mtu3 hw init failed:-110
mtu3 11201000.usb: failed to initialize gadget
mtu3: probe of 11201000.usb failed with error -110

(and same for the one at 11281000)

Add the missing clock for the usb controllers so that they can
successfully probe without relying on the bootloader state.

Fixes: f6c3e61c5486 ("arm64: dts: mediatek: mt8186: Add MTU3 nodes")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240213-mt8186-ssusb-domain-clk-fix-v2-2-1f981d35f3fd@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains

The ssusb power domains currently don't list any clocks, despite
depending on some, and thus rely on the bootloader leaving the required
clocks on in order to work.

When booting with the upstream arm64 defconfig, the power domain
controller will defer probe until modules have loaded since it has an
indirect dependency on CONFIG_MTK_CMDQ, which is configured as a module.
However at the point where modules are loaded, unused clocks are also
disabled, causing the ssusb domains to fail to be enabled and
consequently the controller to fail probe:

mtk-power-controller 10006000.syscon:power-controller: /soc/syscon@10006000/power-controller/power-domain@4: failed to power on domain: -110
mtk-power-controller: probe of 10006000.syscon:power-controller failed with error -110

Add the missing clocks for the ssusb power domains so that they can
successfully probe without relying on the bootloader state.

Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240213-mt8186-ssusb-domain-clk-fix-v2-1-1f981d35f3fd@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes

This fixes:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: /: memory@40000000: 'device_type' is a required property
        from schema $id: http://devicetree.org/schemas/memory.yaml#
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dtb: /: memory@40000000: 'device_type' is a required property
        from schema $id: http://devicetree.org/schemas/memory.yaml#

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240122132357.31264-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7986: reorder nodes

Use order described as preferred in DTS Coding Style:
1. Sort bus nodes by unit address
2. Use alpha-numerical order for the rest

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240212121620.15035-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7986: reorder properties

Use order described as preferred in DTS Coding Style. Mostly just move
"compatible", "reg" and "ranges" properties. In two nodes also move
vendor-prefixed props down.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240212121620.15035-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Add Acelink EW-7886CAX

Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point.
It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and
on-SoC Wi-Fi.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231207080512.3688-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm64: dts: mediatek: Add Acelink EW-7886CAX access point

Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231207080512.3688-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: vendor-prefixes: add acelink

Acelink is a Taiwan company providing network products (routers, access
points, switches, cameras and more).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231207080512.3688-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board

Add a device tree for the Radxa NIO 12L SBC, powered by the MediaTek
MT8395 Genio 1200 SoC.

This board features:
 * MT6359 + MT6360 PMICs at I2C-6
   - Regulators, battery charger, TypeC Port Controller Interface
   - Audio through 3.5mm jack (2CH out, 1CH in)
 * Two MT6315 PMICs over SPMI
   - CPU-Big and GPU Core regulators
 * Network Connectivity
   - Realtek RTL8211FD MDIO PHY/Transceiver, 10/100/1000M Ethernet
   - MT7921E WiFi (PCIe1) / Bluetooth (USB 2.0) combo chip
 * Storage
   - On-board UFS storage
   - On-board eMMC on MMC0 controller
   - MicroSD card slot on MMC1 controller
 * Other connectivity
   - 1x USB Type-C Charging/Power only port
   - 1x USB 3.2 SuperSpeed Type-C OTG+DisplayPort mode
     - Muxed by ITE IT5205 Alternate Mode Passive MUX
   - 4x USB 3.0 Type-A ports on VL805 USB Hub (PCIe0)
   - 1x HDMI IN port
   - 1x HDMI OUT port
   - 1x MIPI DSI (Display) port
   - 2x MIPI CSI (Camera) ports
 * 40-pin Expansion Header
   - Two UART ports
   - I2C, SPI busses
   - I2S for external audio chips
   - ADC
   - GPIOs

Link: https://lore.kernel.org/r/20240202114821.79227-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible

Add a board compatible for the Radxa NIO 12L, based on the MediaTek
MT8395 SoC.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240202114821.79227-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8186: Add video decoder device nodes

Add mt8186 video decoder device nodes.

Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
[eugen.hristev@collabora.com: minor cleanup]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231220133302.39411-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8195: Add MTU3 nodes and correctly describe USB

The MT8195 SoC has four USB controllers: only one is a direct path to
a XHCI controller, while the other three (0, 2 and 3) are behind the
MTU3 DRD controller instead!

Add the missing MTU3 nodes, default disabled, for controllers 0, 2 and
3 and move the related XHCI nodes to be children of their MTU3 DRD to
correctly describe the SoC.

In order to retain USB functionality on all of the MT8195 and MT8395
boards, also move the vusb33 supply and enable the relevant MTU3 nodes
with special attention to the MT8195 Cherry Chromebook, where it was
necessary to set the dr_mode of all MTU3 controllers to host to avoid
interfering with the EC performing DRD on its own.

Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240115084336.938426-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Add MT8186 Magneton Chromebooks

Add entries for the MT8186 based Chromebooks, also collectively known
as the Lenovo IdeaPad Slim 3 Chromebook (14M868). It is also based on
the "Steelix" design. Being a laptop instead of a convertible device,
there is no stylus, which is similar to Rusty. However Magneton does
not have ports on the right side of the device.

Three variants are listed separately. These use different touchscreen
controllers, or lack a touchscreen altogether.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-10-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty

MT8186 Rusty, otherwise known as the Lenovo 100e Chromebook Gen 4, is an
MT8186 based laptop. It is based on the "Steelix" design. Being a laptop
instead of a convertible device, there is no touchscreen or stylus.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-9-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Introduce MT8186 Steelix

The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
is a convertible device based on a common design of the same name. The
device comes in different variants. Of them, whether a world facing
camera is integrated is the only differentiating factor between the
two device trees added. The different SKU IDs describe this alone.

The other device difference is the trackpad component used. This is
simply handled by having both possible components described in the
device tree, and letting the implementation figure out which one is
actually available. The system bootloader / firmware does not
differentiate this in that they share the same SKU IDs.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-8-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool

Tentacruel and Tentacool are MT8186 based Chromebooks based on the
Krabby design.

Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
convertible device with touchscreen and stylus.

Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
device. It does not have a touchscreen or stylus.

The two devices both have two variants. The difference is a second
source trackpad controller that shares the same address as the original,
but is incompatible.

The extra SKU IDs for the Tentacruel devices map to different sensor
components attached to the Embedded Controller. These are not visible
to the main processor.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm: mediatek: Add MT8186 Magneton Chromebooks

Add entries for the MT8186 based Chromebooks, also collectively known
as the Lenovo IdeaPad Slim 3 Chromebook (14M868). It is also based on
the "Steelix" design. Being a laptop instead of a convertible device,
there is no touchscreen or stylus, which is similar to Rusty. However
Magneton does not have ports on the right side of the device.

Three variants are listed separately. These use different touchscreen
controllers, or lack a touchscreen altogether.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-6-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm: mediatek: Add MT8186 Rusty Chromebook

Add an entry for the MT8186 based Rusty Chromebook, also known as the
Lenovo 100e Chromebook Gen 4.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm: mediatek: Add MT8186 Steelix Chromebook

Add an entry for the MT8186 based Steelix Chromebook, also known as the
Lenovo 300e Yoga Chromebook Gen 4.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm: mediatek: Add MT8186 Tentacruel / Tentacool Chromebooks

Add entries for MT8186 based Tentacruel / Tentacool Chromebooks. The two
are based on the same board design: the former is a convertible device
with a touchscreen, stylus, and some extra buttons; the latter is a
clamshell device and lacks these additional features.

The two devices both have two variants. The difference is a second
source trackpad controller that shares the same address as the original,
but is incompatible.

The extra SKU IDs for the Tentacruel devices map to different sensor
components attached to the Embedded Controller. These are not visible
to the main processor.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm: mediatek: Sort entries by SoC then board compatibles

Some of the new MediaTek board entries were inserted in a chronological
order, or just randomly. This makes it harder to search for an entry.

Sort the entries by first grouping by SoC, then sorting by board
compatible strings. Also add a comment at the top asking people to do
the same.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8186: Add jpgenc node

Add JPEG encoder node.

Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Max Staudt <mstaudt@chromium.org>
Tested-by: Max Staudt <mstaudt@chromium.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
[eugen.hristev@collabora.com: minor cleanup]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240127084258.68302-2-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: media: mediatek-jpeg-encoder: change max iommus count

MT8186 has 4 iommus in the list, to cope with this situation, adjust
the maxItems to 4 (instead of previous 2).
Add also minItems as 2 to keep compatibility with current devices.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240127084258.68302-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8186: Add venc node

Add video encoder node.

Signed-off-by: Kyrie Wu <kyrie.wu@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
[eugen.hristev@collabora.com: minor cleanup]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-7-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8186: fix VENC power domain clocks

The larb clock is in fact a subsys clock, so it must be prefixed by
'subsys-' to be correctly identified in the driver.

Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-6-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: media: mtk-vcodec-encoder: add compatible for mt8186

Add compatible for the mt8186 encoder which currently works in the same
way as mt8183.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-5-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8192: fix vencoder clock name

Clock name should be `venc_sel` as per binding.
Fix the warning message :
arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dtb: vcodec@17020000: clock-names:0: 'venc_sel' was expected
        from schema $id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml#

Fixes: aa8f3711fc87 ("arm64: dts: mt8192: Add H264 venc device node")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-4-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: media: mtk-vcodec-encoder: fix non-vp8 clock name

Looking at the binding it makes sense that the `-vp8` compatible has
the `venc_lt_sel` while the other bindings have the `venc_sel` as name for
the clock.
This was also mentioned in the txt version of the binding before the
conversion:
 `
 clock-names: avc encoder must contain "venc_sel", vp8 encoder must
 contain "venc_lt_sel", decoder must contain "vcodecpll", "univpll_d2",
 `

So it is easier to check for compatible that includes vp8, since that's
just one, to have the requirement for the clock name property as
`venc_lt_sel`, rather than for all the others, some of which are missing,
thus for them, the requirement is wrongly `venc_lt_sel`.

Reordered the if/then/else to match `-vp8` and have all the rest of
the compatibles using the other clock name (`venc_sel`).

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-3-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Add socinfo efuses to MT8173/83/96/92/95 SoCs

Add efuse nodes for socinfo retrieval for MT8173, MT8183, MT8186,
MT8192 and MT8195.

Signed-off-by: William-tw Lin <william-tw.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231222080739.21706-2-william-tw.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8195: Enable cros-ec-spi as wake source

The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.

Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.

Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.

Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240102140734.v4.12.Iee33a7f1f991408cef372744199026f936bf54e2@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8192: Enable cros-ec-spi as wake source

The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.

Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.

Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.

Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240102140734.v4.11.Ibd330d26a00f5e219a7e448452769124833a9762@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8183: Enable cros-ec-spi as wake source

The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.

Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.

Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.

Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240102140734.v4.10.Iba4a8b7e908989e57f7838a80013a4062be5e614@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8173: Enable cros-ec-spi as wake source

The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.

Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.

Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.

Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240102140734.v4.9.Ic09ebe116c18e83cc1161f4bb073fea8043f03f3@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7988: add clock controllers

Add bindings of on-SoC clocks.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240108085228.4727-4-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Add initial MT7988A and BPI-R4

MT7988A (AKA MediaTek Filogic 880) is a quad-core ARM Cortex-A73
platform designed for Wi-Fi 7 devices (there is no wireless on SoC
though). The first public MT7988A device is Banana Pi BPI-R4.

Many SoC parts remain to be added (they need their own bindings or
depend on missing clocks). Those present block however are correct and
having base .dtsi will help testing & working on missing stuff.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240108085228.4727-3-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm64: mediatek: Add MT7988A and BPI-R4

MT7988A is another MediaTek's SoC with just 1 device available right
now: Banana Pi BPI-R4.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240108085228.4727-2-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: Add initial MT7981B and Xiaomi AX3000T

MT7981B (AKA MediaTek Filogic 820) is a dual-core ARM Cortex-A53 SoC.
One of market devices using this SoC is Xiaomi AX3000T.

This is initial contribution with basic SoC support. More hardware block
will get added later. Some will need their bindings (like auxadc).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240111103928.721-3-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

dt-bindings: arm64: mediatek: Add MT7981B and Xiaomi AX3000T

MT7981B (AKA Filogic 820) is MediaTek's dual-core ARM Cortex-A53 SoC.
One of market devices using this SoC is Xiaomi AX3000T.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240111103928.721-2-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt8192-asurada: Remove CrosEC base detection node

The commit adding the ChromeOS EC to the Asurada Devicetree mistakenly
added a base detection node. While tablet mode detection is supported by
CrosEC and used by Hayato, it is done through the cros-ec-keyb driver.
The base detection node, which is handled by the hid-google-hammer
driver, also provides tablet mode detection but by checking base
attachment status on the CrosEC, which is not supported for Asurada.

Hence, remove the unused CrosEC base detection node for Asurada.

Fixes: eb188a2aaa82 ("arm64: dts: mediatek: asurada: Add ChromeOS EC")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240207-mt8192-asurada-cbas-remove-v1-1-04cb65951975@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7986: add "#reset-cells" to infracfg

MT7986's Infrastructure System Configuration Controller includes reset
controller. It can reset blocks as specified in the
include/dt-bindings/reset/mt7986-resets.h . Add #reset-cells so it can
be referenced properly.

This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: infracfg@10001000: '#reset-cells' is a required property
        from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#

Fixes: 1f9986b258c2 ("arm64: dts: mediatek: add clock support for mt7986a")
Cc: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240101182040.28538-2-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM

PWM is not a clock provider and its binding doesn't specify
"#clock-cells" property.

This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: pwm@10048000: '#clock-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
        from schema $id: http://devicetree.org/schemas/pwm/mediatek,mt2712-pwm.yaml#

Fixes: eabb04df46c6 ("arm64: dts: mt7986: add PWM")
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240101182040.28538-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7986: fix SPI nodename

This fixes following validation errors:
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtb: spi_nand@0: $nodename:0: 'spi_nand@0' does not match '^(flash|.*sram|nand)(@.*)?$'
        from schema $id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dtb: spi_nand@0: $nodename:0: 'spi_nand@0' does not match '^(flash|.*sram|nand)(@.*)?$'
        from schema $id: http://devicetree.org/schemas/mtd/spi-nand.yaml#

Fixes: 885e153ed7c1 ("arm64: dts: mt7986: add spi related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231116130952.5099-2-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7986: fix SPI bus width properties

This fixes SPI setup and resolves following validation errors:
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtb: spi_nand@0: Unevaluated properties are not allowed ('spi-rx-buswidth', 'spi-tx-buswidth' were unexpected)
        from schema $id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dtb: spi_nand@0: Unevaluated properties are not allowed ('spi-rx-buswidth', 'spi-tx-buswidth' were unexpected)
        from schema $id: http://devicetree.org/schemas/mtd/spi-nand.yaml#

Fixes: 885e153ed7c1 ("arm64: dts: mt7986: add spi related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231116130952.5099-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7986: drop crypto's unneeded/invalid clock name

According to the "inside-secure,safexcel-eip97" binding "clock-names" is
required only if there are two clocks specified. If present the first
name must by "core".

Name "infra_eip97_ck" is invalid and was probably just a typo. Drop it.

Fixes: ecc5287cfe53 ("arm64: dts: mt7986: add crypto related device nodes")
Cc: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231116132411.7665-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mediatek: mt7986: fix reference to PWM in fan node

This fixes typo and resolves following validation error:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: pwm-fan: pwms: [[54, 0, 10000], [0]] is too long
        from schema $id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#

Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231116130816.4932-1-zajec5@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arm64: dts: mt8183: Move CrosEC base detection node to kukui-based DTs

The cbas node is used to describe base detection functionality in the
ChromeOS EC, which is used for units that have a detachable keyboard and
thus rely on this functionality to switch between tablet and laptop
mode.

Despite the original commit having added the cbas node to the
mt8183-kukui.dtsi, not all machines that include it are detachables. In
fact all machines that include from mt8183-kukui-jacuzzi.dtsi are either
clamshells (ie normal laptops) or convertibles, meaning the keyboard can
be flipped but not detached. The detection for the keyboard getting
flipped is handled by the driver bound to the keyboard-controller node
in the EC.

Move the base detection node from the base kukui dtsi to the dtsis where
all machines are detachables, and thus actually make use of the node.

Fixes: 4fa8492d1e5b ("arm64: dts: mt8183: add cbas node under cros_ec")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240116-mt8183-kukui-cbas-remove-v3-1-055e21406e86@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Linux 6.8-rc1

Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Merge tag 'timers-core-2024-01-21' of git://git./linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Merge tag 'powerpc-6.8-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

bcachefs: Improve inode_to_text()

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: logged_ops_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: reflink_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; extents_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: ec_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: subvolume_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: snapshot_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: alloc_background_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: xattr_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: dirent_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: inode_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs; quota_format.h

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: sb-counters_format.h

bcachefs_format.h has gotten too big; let's do some organizing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: counters.c -> sb-counters.c

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: comment bch_subvolume

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_snapshot::btime

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: add missing __GFP_NOWARN

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: opts->compression can now also be applied in the background

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Prep work for variable size btree node buffers

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: grab s_umount only if snapshotting

When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.

$ cat test.sh
prog=bcachefs

$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots

while true;do
    $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
    sleep 1s
done

$ cat /etc/mongodb.conf
systemLog:
  destination: file
  logAppend: true
  path: /mnt/data/mongod.log

storage:
  dbPath: /mnt/data/

lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G            E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
               but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
               which lock already depends on the new lock.

[ 3437.456553]
               the existing dependency chain (in reverse order) is:
[ 3437.457054]
               -> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507]        down_read+0x3e/0x170
[ 3437.457772]        bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206]        __x64_sys_ioctl+0x93/0xd0
[ 3437.458498]        do_syscall_64+0x42/0xf0
[ 3437.458779]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
               -> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615]        down_read+0x3e/0x170
[ 3437.459878]        bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276]        bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686]        notify_change+0x1f1/0x4a0
[ 3437.461283]        do_truncate+0x7f/0xd0
[ 3437.461555]        path_openat+0xa57/0xce0
[ 3437.461836]        do_filp_open+0xb4/0x160
[ 3437.462116]        do_sys_openat2+0x91/0xc0
[ 3437.462402]        __x64_sys_openat+0x53/0xa0
[ 3437.462701]        do_syscall_64+0x42/0xf0
[ 3437.462982]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
               -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843]        down_write+0x3b/0xc0
[ 3437.464223]        bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493]        vfs_write+0x21b/0x4c0
[ 3437.464653]        ksys_write+0x69/0xf0
[ 3437.464839]        do_syscall_64+0x42/0xf0
[ 3437.465009]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
               -> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471]        __lock_acquire+0x1455/0x21b0
[ 3437.465656]        lock_acquire+0xc6/0x2b0
[ 3437.465822]        mnt_want_write+0x46/0x1a0
[ 3437.465996]        filename_create+0x62/0x190
[ 3437.466175]        user_path_create+0x2d/0x50
[ 3437.466352]        bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617]        __x64_sys_ioctl+0x93/0xd0
[ 3437.466791]        do_syscall_64+0x42/0xf0
[ 3437.466957]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
               other info that might help us debug this:

[ 3437.469670] 2 locks held by bcachefs/35533:
               other info that might help us debug this:

[ 3437.467507] Chain exists of:
                 sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48

[ 3437.467979]  Possible unsafe locking scenario:

[ 3437.468223]        CPU0                    CPU1
[ 3437.468405]        ----                    ----
[ 3437.468585]   rlock(&type->s_umount_key#48);
[ 3437.468758]                                lock(&c->snapshot_create_lock);
[ 3437.469030]                                lock(&type->s_umount_key#48);
[ 3437.469291]   rlock(sb_writers#10);
[ 3437.469434]
                *** DEADLOCK ***

[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838]  #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294]  #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
               stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G            E      6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795]  <TASK>
[ 3437.471884]  dump_stack_lvl+0x57/0x90
[ 3437.472035]  check_noncircular+0x132/0x150
[ 3437.472202]  __lock_acquire+0x1455/0x21b0
[ 3437.472369]  lock_acquire+0xc6/0x2b0
[ 3437.472518]  ? filename_create+0x62/0x190
[ 3437.472683]  ? lock_is_held_type+0x97/0x110
[ 3437.472856]  mnt_want_write+0x46/0x1a0
[ 3437.473025]  ? filename_create+0x62/0x190
[ 3437.473204]  filename_create+0x62/0x190
[ 3437.473380]  user_path_create+0x2d/0x50
[ 3437.473555]  bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819]  ? lock_acquire+0xc6/0x2b0
[ 3437.474002]  ? __fget_files+0x2a/0x190
[ 3437.474195]  ? __fget_files+0xbc/0x190
[ 3437.474380]  ? lock_release+0xc5/0x270
[ 3437.474567]  ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764]  ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090]  __x64_sys_ioctl+0x93/0xd0
[ 3437.475277]  do_syscall_64+0x42/0xf0
[ 3437.475454]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================

In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.

Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().

Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:

[  406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[  406.830676 ] #PF: supervisor read access in kernel mode
[  406.831643 ] #PF: error_code(0x0000) - not-present page
[  406.832487 ] PGD 0 P4D 0
[  406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[  406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G           OE      6.7.0-rc7-custom+ #90
[  406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[  406.835796 ] RIP: 0010:kfree+0x62/0x140
[  406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[  406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[  406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[  406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[  406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[  406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[  406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[  406.840451 ] FS:  00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[  406.840851 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[  406.841464 ] Call Trace:
[  406.841583 ]  <TASK>
[  406.841682 ]  ? __die+0x1f/0x70
[  406.841828 ]  ? page_fault_oops+0x159/0x470
[  406.842014 ]  ? fixup_exception+0x22/0x310
[  406.842198 ]  ? exc_page_fault+0x1ed/0x200
[  406.842382 ]  ? asm_exc_page_fault+0x22/0x30
[  406.842574 ]  ? bch2_fs_release+0x54/0x280 [bcachefs]
[  406.842842 ]  ? kfree+0x62/0x140
[  406.842988 ]  ? kfree+0x104/0x140
[  406.843138 ]  bch2_fs_release+0x54/0x280 [bcachefs]
[  406.843390 ]  kobject_put+0xb7/0x170
[  406.843552 ]  deactivate_locked_super+0x2f/0xa0
[  406.843756 ]  cleanup_mnt+0xba/0x150
[  406.843917 ]  task_work_run+0x59/0xa0
[  406.844083 ]  exit_to_user_mode_prepare+0x197/0x1a0
[  406.844302 ]  syscall_exit_to_user_mode+0x16/0x40
[  406.844510 ]  do_syscall_64+0x4e/0xf0
[  406.844675 ]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  406.844907 ] RIP: 0033:0x7f0a2664e4fb

Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bios must be 512 byte algined

Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: remove redundant variable tmp

The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve trace_trans_restart_relock

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Fix excess transaction restarts in __bchfs_fallocate()

drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: extents_to_bp_state

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bkey_and_val_eq()

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Better journal tracepoints

Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Print size of superblock with space allocated

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Avoid flushing the journal in the discard path

When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.

But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve move_extent tracepoint

Also print out the data_opts, so that we can see what specifically is
being done to an extent.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add missing bch2_moving_ctxt_flush_all()

This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Re-add move_extent_write tracepoint

It appears this was accidentally deleted at some point - also, do a bit
of cleanup.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amount

Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.

This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Add .val_to_text() for KEY_TYPE_cookie

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't pass memcmp() as a pointer

Some (buggy!) compilers have issues with this.

Fixes: https://github.com/koverstreet/bcachefs/issues/625
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs

Pull header fix from Kent Overstreet:
 "Just one small fixup for the RT build"

* tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs:
  spinlock: Fix failing build for PREEMPT_RT

bcachefs: Reduce would_deadlock restarts

We don't have to take locks in any particular ordering - we'll make
forward progress just fine - but if we try to stick to an ordering, it
can help to avoid excessive would_deadlock transaction restarts.

This tweaks the reflink path to take extents btree locks in the right
order.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_trans_account_disk_usage_change()

The disk space accounting rewrite is splitting out accounting for each
replicas set - those are moving to btree keys, instead of percpu
counters.

This breaks bch2_trans_fs_usage_apply() up, splitting out the part we
will still need.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch_fs_usage_base

Split out base filesystem usage into its own type; prep work for
breaking up bch2_trans_fs_usage_apply().

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_prt_compression_type()

bounds checking helper, since compression types are extensible

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: helpers for printing data types

We need bounds checking since new versions may introduce new data types.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: BTREE_TRIGGER_ATOMIC

Add a new flag to be explicit about when we're running atomic triggers.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: drop to_text code for obsolete bps in alloc keys

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: eytzinger_for_each() declares loop iter

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>