i.MX: add an emulation for RNGC

Add an emulation for the RNGC random number generator and the compatible
RNGB variant. These peripherals are included (at least) in imx25 and
imx35 chipsets.

The emulation supports the initial self test, reseeding the prng and
reading random numbers.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle

According to the specification "Semihosting for AArch32 and Aarch64",
the SYS_OPEN operation should return:

 - A nonzero handle if the call is successful
 - -1 if the call is not successful

So, it should never return 0.

Prior to commit 35e9a0a8ce4b ("target/arm/arm-semi: Make semihosting
code hand out its own file descriptors"), the guest fd matched to the
host fd. It returned a nonzero handle on success since the fd 0 is
already used for stdin.

Now that the guest fd is the index of guestfd_array, it starts from 0.

I noticed this issue particularly because Trusted Firmware-A built with
PLAT=qemu is no longer working. Its io_semihosting driver only handles
a positive return value as a valid filehandle.

Basically, there are two ways to fix this:

  - Use (guestfd - 1) as the index of guestfs_arrary. We need to insert
    increment/decrement to convert the guestfd and the array index back
    and forth.

  - Keep using guestfd as the index of guestfs_array. The first entry
    of guestfs_array is left unused.

I thought the latter is simpler. We end up with wasting a small piece
of memory for the unused first entry of guestfd_array, but this is
probably not a big deal.

Fixes: 35e9a0a8ce4b ("target/arm/arm-semi: Make semihosting code hand out its own file descriptors")
Cc: qemu-stable@nongnu.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200109041228.10131-1-masahiroy@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/allwinner-a10: Remove local qemu_irq variables

We won't reuse the CPU IRQ/FIQ variables. Simplify by calling
qdev_get_gpio_in() in place.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/allwinner-a10: Simplify by passing IRQs with qdev_pass_gpios()

By calling qdev_pass_gpios() we don't need to hold a copy of the
IRQs from the INTC into the SoC state.
Instead of filling an array of qemu_irq and passing it around, we
can now directly call qdev_get_gpio_in() on the SoC.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/allwinner-a10: Move SoC definitions out of header

These definitions are specific to the A10 SoC and don't need
to be exported to the different Allwinner peripherals.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

tests/boot_linux_console: Add a SD card test for the CubieBoard

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/

The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  [...]
  console: ahci-sunxi 1c18000.sata: Linked as a consumer to regulator.4
  console: ahci-sunxi 1c18000.sata: controller can't do 64bit DMA, forcing 32bit
  console: ahci-sunxi 1c18000.sata: AHCI 0001.0000 32 slots 1 ports 1.5 Gbps 0x1 impl platform mode
  console: ahci-sunxi 1c18000.sata: flags: ncq only
  console: scsi host0: ahci-sunxi
  console: ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 27
  console: of_cfs_init
  console: of_cfs_init: OK
  console: vcc3v0: disabling
  console: vcc5v0: disabling
  console: usb1-vbus: disabling
  console: usb2-vbus: disabling
  console: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  console: ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
  console: ata1.00: 40960 sectors, multi 16: LBA48 NCQ (depth 32)
  console: ata1.00: applying bridge limits
  console: ata1.00: configured for UDMA/100
  console: scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
  console: sd 0:0:0:0: Attached scsi generic sg0 type 0
  console: sd 0:0:0:0: [sda] 40960 512-byte logical blocks: (21.0 MB/20.0 MiB)
  console: sd 0:0:0:0: [sda] Write Protect is off
  console: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  console: sd 0:0:0:0: [sda] Attached SCSI disk
  console: EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
  console: EXT4-fs (sda): mounted filesystem without journal. Opts: (null)
  console: VFS: Mounted root (ext2 filesystem) readonly on device 8:0.
  [...]
  console: cat /proc/partitions
  console: / # cat /proc/partitions
  console: major minor  #blocks  name
  console: 1        0       4096 ram0
  console: 1        1       4096 ram1
  console: 1        2       4096 ram2
  console: 1        3       4096 ram3
  console: 8        0      20480 sda
  console: reboot
  console: / # reboot
  [...]
  console: sd 0:0:0:0: [sda] Synchronizing SCSI cache
  console: reboot: Restarting system
  PASS (48.39 s)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/boot_linux_console: Add initrd test for the CubieBoard

This test boots a Linux kernel on a CubieBoard and verify
the serial output is working.

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/

The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: CPU: ARMv7 Processor [410fc080] revision 0 (ARMv7), cr=50c5387d
  console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  console: OF: fdt: Machine model: Cubietech Cubieboard
  [...]
  console: Boot successful.
  console: cat /proc/cpuinfo
  console: / # cat /proc/cpuinfo
  console: processor      : 0
  console: model name     : ARMv7 Processor rev 0 (v7l)
  console: BogoMIPS       : 832.51
  [...]
  console: Hardware       : Allwinner sun4i/sun5i Families
  console: Revision       : 0000
  console: Serial         : 0000000000000000
  console: cat /proc/iomem
  console: / # cat /proc/iomem
  console: 01c00000-01c0002f : system-control@1c00000
  console: 01c02000-01c02fff : dma-controller@1c02000
  console: 01c05000-01c05fff : spi@1c05000
  console: 01c0b080-01c0b093 : mdio@1c0b080
  console: 01c0c000-01c0cfff : lcd-controller@1c0c000
  console: 01c0d000-01c0dfff : lcd-controller@1c0d000
  console: 01c0f000-01c0ffff : mmc@1c0f000
  [...]
  PASS (54.35 s)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20191230110953.25496-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: Add the Netduino Plus 2

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: dad8d8d47f7625913e35e27a1c00f603a6b08f9a.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: Add the STM32F4xx SoC

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1d145c4c13e5fa140caf131232a6f524c88fcd72.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Add the STM32F4xx EXTI device

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ef941d59fd8658589d34ed432e1d6dfdcf7fb1d0.1576658572.git.alistair@alistair23.me
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Add the STM32F4xx Sysconfig device

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 49b01423a09cef2ca832ff73a84a996568f1a8fc.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200115' into staging

Add cpu_{ld,st}*_mmuidx_ra
Remove MMU_MODE*_SUFFIX
Move tcg headers under include/

# gpg: Signature made Thu 16 Jan 2020 01:36:41 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20200115: (34 commits)
  MAINTAINERS: Replace Claudio Fontana for tcg/aarch64
  configure: Remove tcg/ from the preprocessor include search list
  tcg: Move TCG headers to include/tcg/
  tcg: Search includes in the parent source directory
  tcg: Search includes from the project root source directory
  cputlb: Expand cpu_ldst_template.h in cputlb.c
  cputlb: Remove support for MMU_MODE*_SUFFIX
  target/ppc: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX
  target/s390x: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX
  target/mips: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX
  target/m68k: Use cpu_*_mmuidx_ra instead of MMU_MODE{0,1}_SUFFIX
  target/xtensa: Remove MMU_MODE{0,1,2,3}_SUFFIX
  target/unicore32: Remove MMU_MODE{0,1}_SUFFIX
  target/sh4: Remove MMU_MODE{0,1}_SUFFIX
  target/microblaze: Remove MMU_MODE{0,1,2}_SUFFIX
  target/i386: Remove MMU_MODE{0,1,2}_SUFFIX
  target/cris: Remove MMU_MODE{0,1}_SUFFIX
  target/alpha: Remove MMU_MODE{0,1}_SUFFIX
  target/nios2: Remove MMU_MODE{0,1}_SUFFIX
  cputlb: Expand cpu_ldst_useronly_template.h in user-exec.c
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ui/gtk: Get display refresh rate with GDK version 3.22 or later

Commit c4c00922cc introduced the use of the GdkMonitor API, which
was introduced in GTK+ 3.22:
https://developer.gnome.org/gdk3/stable/api-index-3-22.html#api-index-3.22

Unfortunately this break building with older versions, as on Ubuntu
Xenial which provides GTK+ 3.18:

  $ lsb_release -cd
  Description:    Ubuntu 16.04.5 LTS
  Codename:       xenial

  $ ./configure && make
  GTK support       yes (3.18.9)
  GTK GL support    no
  [...]
    CC      ui/gtk.o
  qemu/ui/gtk.c: In function ‘gd_vc_gfx_init’:
  qemu/ui/gtk.c:1973:5: error: unknown type name ‘GdkMonitor’
       GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
       ^
  qemu/ui/gtk.c:1973:27: error: implicit declaration of function ‘gdk_display_get_monitor_at_window’ [-Werror=implicit-function-declaration]
       GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
                             ^
  qemu/ui/gtk.c:1973:5: error: nested extern declaration of ‘gdk_display_get_monitor_at_window’ [-Werror=nested-externs]
       GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
       ^
  qemu/ui/gtk.c:1973:27: error: initialization makes pointer from integer without a cast [-Werror=int-conversion]
       GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
                             ^
  qemu/ui/gtk.c:2035:28: error: implicit declaration of function ‘gdk_monitor_get_refresh_rate’ [-Werror=implicit-function-declaration]
       refresh_rate_millihz = gdk_monitor_get_refresh_rate(monitor);
                              ^
  qemu/ui/gtk.c:2035:5: error: nested extern declaration of ‘gdk_monitor_get_refresh_rate’ [-Werror=nested-externs]
       refresh_rate_millihz = gdk_monitor_get_refresh_rate(monitor);
       ^
  cc1: all warnings being treated as errors
  qemu/rules.mak:69: recipe for target 'ui/gtk.o' failed
  make: *** [ui/gtk.o] Error 1

GTK+ provides convenient definition in <gdk/gdkversionmacros.h>
(already include by <gdk/gdk.h>) to check which API are available.

We only use the GdkMonitor API to get the monitor refresh rate.

Extract this code as a new gd_refresh_rate_millihz() function,
and check GDK_VERSION_3_22 is defined before calling its API.
If it is not defined, return 0. This is safe and fixes our build
failure (see https://travis-ci.org/qemu/qemu/builds/636992508).

Reported-by: Travis-CI
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116115413.31650-1-philmd@redhat.com
Fixes: c4c00922cc (display/gtk: get proper refreshrate)
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: Replace Claudio Fontana for tcg/aarch64

Claudio's Huawei address has been defunct for quite a while.  In

  https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg06872.html

he asked for his personal address to be removed as well.

I will take over officially.

Cc: Claudio Fontana <claudio.fontana@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

configure: Remove tcg/ from the preprocessor include search list

All tcg includes are relative to the repository root directory,
we can safely remove the tcg/ directory from the include search
path list.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-5-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Move TCG headers to include/tcg/

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-4-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Search includes in the parent source directory

All the *.inc.c files included by tcg/$TARGET/tcg-target.inc.c
are in tcg/, their parent directory. To simplify the preprocessor
search path, include the relative parent path: '..'.

Patch created mechanically by running:

  $ for x in tcg-pool.inc.c tcg-ldst.inc.c; do \
    sed -i "s,#include \"$x\",#include \"../$x\"," \
      $(git grep -l "#include \"$x\""); \
    done

Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-3-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Search includes from the project root source directory

We currently search both the root and the tcg/ directories for tcg
files:

  $ git grep '#include "tcg/' | wc -l
  28

  $ git grep '#include "tcg[^/]' | wc -l
  94

To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.

Patch created mechanically by running:

  $ for x in \
      tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
      tcg-op-gvec.h tcg-gvec-desc.h; do \
    sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
      $(git grep -l "#include \"$x\""); \
    done

Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cputlb: Expand cpu_ldst_template.h in cputlb.c

Reduce the amount of preprocessor obfuscation by expanding
the text of each of the functions generated.  The result is
only slightly smaller than the original.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cputlb: Remove support for MMU_MODE*_SUFFIX

All users have now been converted to cpu_*_mmuidx_ra.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX

There are only two uses.  Within dcbz_common, the local variable
mmu_idx already contains the epid computation, and we can avoid
repeating it for the store.  Within helper_icbiep, the usage is
trivially expanded using PPC_TLB_EPID_LOAD.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX

The generated functions aside from *_real are unused.
The *_real functions have a couple of users in mem_helper.c;
use *_mmuidx_ra instead, with MMU_REAL_IDX.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Use *_mmuidx_ra directly, without intermediate macros.

target/mips: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX

The separate suffixed functions were used to construct
some do_##insn function switched on mmu_idx.  The interface
is exactly identical to the *_mmuidx_ra functions.  Replace
them directly and remove the constructions.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/m68k: Use cpu_*_mmuidx_ra instead of MMU_MODE{0,1}_SUFFIX

The generated *_user functions are unused.  The *_kernel functions
have a couple of users in op_helper.c; use *_mmuidx_ra instead,
with MMU_KERNEL_IDX.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Use *_mmuidx_ra directly, without intermediate macros.

target/xtensa: Remove MMU_MODE{0,1,2,3}_SUFFIX

The functions generated by these macros are unused.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/unicore32: Remove MMU_MODE{0,1}_SUFFIX

The functions generated by these macros are unused.

Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sh4: Remove MMU_MODE{0,1}_SUFFIX

The functions generated by these macros are unused.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/microblaze: Remove MMU_MODE{0,1,2}_SUFFIX

The functions generated by these macros are unused.

Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Remove MMU_MODE{0,1,2}_SUFFIX

The functions generated by these macros are unused.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Remove MMU_MODE{0,1}_SUFFIX

The functions generated by these macros are unused.

Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/alpha: Remove MMU_MODE{0,1}_SUFFIX

The functions generated by these macros are unused.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Remove MMU_MODE{0,1}_SUFFIX

The functions generated by these macros are unused.

Cc: Chris Wulff <crwulff@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cputlb: Expand cpu_ldst_useronly_template.h in user-exec.c

With the tracing hooks, the inline functions are no longer
so simple.  Reduce the amount of preprocessor obfuscation
by expanding the text of each of the functions generated.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Use cpu_*_mmuidx_ra instead of templates

Do not use exec/cpu_ldst_{,useronly_}template.h directly,
but instead use the functional interface.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cputlb: Provide cpu_(ld,st}*_mmuidx_ra for user-only

This finishes the new interface began with the previous patch.
Document the interface and deprecate MMU_MODE<N>_SUFFIX.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cputlb: Rename helper_ret_ld*_cmmu to cpu_ld*_code

There are no uses of the *_cmmu names other than the bare wrapping
within the *_code inlines.  Therefore rename the functions so we
can drop the inlines.

Use abi_ptr instead of target_ulong in preparation for user-only;
the two types are identical for softmmu.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

translator: Use cpu_ld*_code instead of open-coding

The DO_LOAD macros replicate the distinction already performed
by the cpu_ldst.h functions.  Use them.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cputlb: Move body of cpu_ldst_template.h out of line

With the tracing hooks, the inline functions are no longer
so simple.  Once out-of-line, the current tlb_entry lookup
is redundant with the one in the main load/store_helper.

This also begins the introduction of a new target facing
interface, with suffix *_mmuidx_ra.  This is not yet
official because the interface is not done for user-only.

Use abi_ptr instead of target_ulong in preparation for
user-only; the two types are identical for softmmu.

What remains in cpu_ldst_template.h are the expansions
for _code, _data, and MMU_MODE<N>_SUFFIX.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

plugins: Include trace/mem.h in api.c

Code movement in an upcoming patch will show that this file
was implicitly depending on trace/mem.h being included beforehand.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Include trace-root.h in syscall-trace.h

Code movement in an upcoming patch will show that this file
was implicitly depending on trace-root.h being included beforehand.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Include tcg.h in syscall.c

Code movement in an upcoming patch will show that this file
was implicitly depending on tcg.h being included indirectly.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Include tcg.h in tcg-runtime.c

Code movement in an upcoming patch will show that this file
was implicitly depending on tcg.h being included indirectly.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Include tcg.h in sve_helper.c

Code movement in an upcoming patch will show that this file
was implicitly depending on tcg.h being included indirectly.

Cc: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/s390x: Include tcg.h in mem_helper.c

Code movement in an upcoming patch will show that this file
was implicitly depending on tcg.h being included indirectly.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

trace: Remove trace_mem_build_info_no_se_[bl]e

It is easy for the atomic helpers to use trace_mem_build_info
directly, without resorting to symbol pasting.  For this usage,
we cannot use trace_mem_get_info, because the MemOp does not
support 16-byte accesses.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cputlb: Use trace_mem_get_info instead of trace_mem_build_info

In the cpu_ldst templates, we already require a MemOp, and it
is cleaner and clearer to pass that instead of 3 separate
arguments describing the memory operation.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/xtensa: Use probe_access for itlb_hit_test

We don't actually need the result of the read, only to probe that the
memory mapping exists.  This is exactly what probe_access does.

This is also the only user of any cpu_ld*_code_ra function.
Removing this allows the interface to be removed shortly.

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-01-14' into staging

QAPI patches for 2020-01-14

# gpg: Signature made Tue 14 Jan 2020 10:15:22 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-01-14:
  qapi: Simplify QAPISchemaModularCVisitor
  qapi: Fix code generation for empty modules
  qapi: Proper intermediate representation for modules
  qapi: Generate command registration stuff into separate files
  tests/Makefile.include: Fix missing test-qapi-emit-events.[ch]
  qapi: Tweak "command returns a nice type" check for clarity

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20200114-pull-request' into staging

ui: add "-display help", gtk refresh rate.

# gpg: Signature made Tue 14 Jan 2020 10:01:14 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20200114-pull-request:
  display/gtk: get proper refreshrate
  ui: Print available display backends with '-display help'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Tue 14 Jan 2020 09:30:45 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  linux-aio: increasing MAX_EVENTS to a larger hardcoded value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

Pull request

# gpg: Signature made Tue 14 Jan 2020 09:29:11 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace: update qemu-trace-stap to Python 3

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qapi: Simplify QAPISchemaModularCVisitor

Since the previous commit, QAPISchemaVisitor.visit_module() is called
just once.  Simplify QAPISchemaModularCVisitor accordingly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qapi: Fix code generation for empty modules

When a sub-module doesn't contain any definitions, we don't generate
code for it, but we do generate the #include.

We generate code only for modules that get visited.
QAPISchema.visit() visits only modules that have definitions.  It can
visit modules multiple times.

Clean this up as follows.  Collect entities in their QAPISchemaModule.
Have QAPISchema.visit() call QAPISchemaModule.visit() for each module.
Have QAPISchemaModule.visit() call .visit_module() for itself, and
QAPISchemaEntity.visit() for each of its entities.  This way, we visit
each module exactly once.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qapi: Proper intermediate representation for modules

Modules are represented only by their names so far.  Introduce class
QAPISchemaModule.  So far, it merely wraps the name.  The next patch
will put it to more interesting use.

Once again, arrays spice up the patch a bit.  For any other type,
@info points to the definition, which lets us map from @info to
module.  For arrays, there is no definition, and @info points to the
first use instead.  We have to use the element type's module instead,
which is only available after .check().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qapi: Generate command registration stuff into separate files

Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal.  Generate it into separate files.  This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>

tests/Makefile.include: Fix missing test-qapi-emit-events.[ch]

Commit 5d75648b56 "qapi: Generate QAPIEvent stuff into separate files"
added tests/test-qapi-emit-events.[ch] to the set of generated files,
but neglected to update tests/.gitignore and tests/Makefile.include.
Commit a0af8cee3c "tests/.gitignore: ignore test-qapi-emit-events.[ch]
for in-tree builds" fixed the former.  Now fix the latter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

qapi: Tweak "command returns a nice type" check for clarity

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

display/gtk: get proper refreshrate

Because some VMs in QEMU can get GPU virtualization (using technologies
such as iGVT-g, as mentioned previously), they could produce a video
output that had a higher display refresh rate than of what the GTK
display was displaying. (fxp. Playing a video game inside of a Windows
VM at 60 Hz, while the output stood locked at 33 Hz because of defaults
set in include/ui/console.h)

Since QEMU does indeed have internal systems for determining frame
times as defined in ui/console.c.
The code checks for a variable called update_interval that it later
uses for time calculation. This variable, however, isn't defined
anywhere in ui/gtk.c and instead ui/console.c just sets it to
GUI_REFRESH_INTERVAL_DEFAULT which is 30

update_interval represents the number of milliseconds per display
refresh, and by doing some math we get that 1000/30 = 33.33... Hz

This creates the mentioned problem and what this patch does is that it
checks for the display refresh rate reported by GTK itself (we can take
this as a safe value) and just converts it back to a number of
milliseconds per display refresh.

Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200108121342.29597-1-pavlica.nikola@gmail.com

[ kraxel: style tweak: add blank line between vars and code ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ui: Print available display backends with '-display help'

We already print availabled devices with "-device help", or available
backends with "-netdev help" or "-chardev help". Let's provide a way
for the users to query the available display backends, too.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200108144702.29969-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

trace: update qemu-trace-stap to Python 3

qemu-trace-stap does not support Python 3 yet:

  $ scripts/qemu-trace-stap list path/to/qemu-system-x86_64
  Traceback (most recent call last):
    File "scripts/qemu-trace-stap", line 175, in <module>
      main()
    File "scripts/qemu-trace-stap", line 171, in main
      args.func(args)
    File "scripts/qemu-trace-stap", line 118, in cmd_list
      print_probes(args.verbose, "*")
    File "scripts/qemu-trace-stap", line 114, in print_probes
      if line.startswith(prefix):
  TypeError: startswith first arg must be bytes or a tuple of bytes, not str

Now that QEMU requires Python 3.5 or later we can switch to pure Python
3.  Use Popen()'s universal_newlines=True argument to treat stdout as
text instead of binary.

Fixes: 62dd1048c0bd ("trace: add ability to do simple printf logging via systemtap")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1787395
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20200107112438.383958-1-stefanha@redhat.com
Message-Id: <20200107112438.383958-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

linux-aio: increasing MAX_EVENTS to a larger hardcoded value

Since commit 6040aedddb5f474a9c2304b6a432a652d82b3d3c "virtio-blk:
make queue size configurable",if the user set the queue size to
more than 128 ,it will not take effect. That's because linux aio's
maximum outstanding requests at a time is always less than or equal
to 128.

This patch simply increase MAX_EVENTS to a larger hardcoded value of
1024 as a shortterm fix.

Signed-off-by: wangyong <wang.yongD@h3c.com>
Message-id: faa5781afd354a96a0be152b288f636f@h3c.com
Message-Id: <faa5781afd354a96a0be152b288f636f@h3c.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200113-pull-request' into staging

usb: bugfixes for xhci, usb pass-through and usb redirection.

# gpg: Signature made Mon 13 Jan 2020 13:06:35 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20200113-pull-request:
  xhci: recheck slot status
  xhci: Fix memory leak in xhci_kick_epctx when poweroff GuestOS
  usbredir: Prevent recursion in usbredir_write
  usb-redir: remove 'remote wakeup' flag from configuration descriptor
  usb-host: remove 'remote wakeup' flag from configuration descriptor

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-01-12' into staging

* Move qtests into a separate directory
* Build index.html for docs

# gpg: Signature made Sun 12 Jan 2020 11:21:41 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2020-01-12:
  docs: build an index page for the HTML docs
  tests/libqos: Move the libqos files under tests/qtest/
  tests/Makefile: Move qtest-related settings to a separate Makefile.include
  test: Move qtests to a separate directory
  tests/Makefile: Separate unit test dependencies from qtest dependencies
  tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables
  tests/ptimer: Remove unnecessary inclusion of libqtest.h
  tests/Makefile: test-char does not need libqtest

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

xhci: recheck slot status

Factor out slot status check into a helper function.  Add an additional
check after completing transfers.  This is needed in case a guest
queues multiple transfers in a row and a device unplug happens while
qemu processes them.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1786413
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200107083606.12393-1-kraxel@redhat.com

xhci: Fix memory leak in xhci_kick_epctx when poweroff GuestOS

start vm with libvirt, when GuestOS running, enter poweroff command using
the xhci keyboard, then ASAN shows memory leak stack：

Direct leak of 80 byte(s) in 5 object(s) allocated from:
    #0 0xfffd1e6431cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
    #1 0xfffd1e107163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
    #2 0xaaad39051367 in qemu_sglist_init /qemu/dma-helpers.c:43
    #3 0xaaad3947c407 in pci_dma_sglist_init /qemu/include/hw/pci/pci.h:842
    #4 0xaaad3947c407 in xhci_xfer_create_sgl /qemu/hw/usb/hcd-xhci.c:1446
    #5 0xaaad3947c407 in xhci_setup_packet /qemu/hw/usb/hcd-xhci.c:1618
    #6 0xaaad3948625f in xhci_submit /qemu/hw/usb/hcd-xhci.c:1827
    #7 0xaaad3948625f in xhci_fire_transfer /qemu/hw/usb/hcd-xhci.c:1839
    #8 0xaaad3948625f in xhci_kick_epctx /qemu/hw/usb/hcd-xhci.c:1991
    #9 0xaaad3948f537 in xhci_doorbell_write /qemu/hw/usb/hcd-xhci.c:3158
    #10 0xaaad38bcbfc7 in memory_region_write_accessor /qemu/memory.c:483
    #11 0xaaad38bc654f in access_with_adjusted_size /qemu/memory.c:544
    #12 0xaaad38bd1877 in memory_region_dispatch_write /qemu/memory.c:1482
    #13 0xaaad38b1c77f in flatview_write_continue /qemu/exec.c:3167
    #14 0xaaad38b1ca83 in flatview_write /qemu/exec.c:3207
    #15 0xaaad38b268db in address_space_write /qemu/exec.c:3297
    #16 0xaaad38bf909b in kvm_cpu_exec /qemu/accel/kvm/kvm-all.c:2383
    #17 0xaaad38bb063f in qemu_kvm_cpu_thread_fn /qemu/cpus.c:1246
    #18 0xaaad39821c93 in qemu_thread_start /qemu/util/qemu-thread-posix.c:519
    #19 0xfffd1c8378bb  (/lib64/libpthread.so.0+0x78bb)
    #20 0xfffd1c77616b  (/lib64/libc.so.6+0xd616b)

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-id: 20200110105855.81144-1-kuhn.chenqun@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usbredir: Prevent recursion in usbredir_write

I've got a case where usbredir_write manages to call back into itself
via spice; this patch causes the recursion to fail (0 bytes) the write;
this seems to avoid the deadlock I was previously seeing.

I can't say I fully understand the interaction of usbredir and spice;
but there are a few similar guards in spice and usbredir
to catch other cases especially onces also related to spice_server_char_device_wakeup

This case seems to be triggered by repeated migration+repeated
reconnection of the viewer; but my debugging suggests the migration
finished before this hits.

The backtrace of the hang looks like:
  reds_handle_ticket
  reds_handle_other_links
  reds_channel_do_link
  red_channel_connect
  spicevmc_connect
  usbredir_create_parser
  usbredirparser_do_write
  usbredir_write
  qemu_chr_fe_write
  qemu_chr_write
  qemu_chr_write_buffer
  spice_chr_write
  spice_server_char_device_wakeup
  red_char_device_wakeup
  red_char_device_write_to_device
  vmc_write
  usbredirparser_do_write
  usbredir_write
  qemu_chr_fe_write
  qemu_chr_write
  qemu_chr_write_buffer
  qemu_mutex_lock_impl

and we fail as we lang through qemu_chr_write_buffer's lock
twice.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1752320

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191218113012.13331-1-dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Fix some uninitialized variable warnings,
some memory leak warnings and update MAINTAINERS file.

# gpg: Signature made Wed 08 Jan 2020 16:02:11 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  vl: fix memory leak in configure_accelerators
  arm/translate-a64: fix uninitialized variable warning
  nbd: fix uninitialized variable warning
  util/module: fix a memory leak
  MAINTAINERS: Update Yuval Shaia's email address

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

usb-redir: remove 'remote wakeup' flag from configuration descriptor

If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-redir.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.

Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-3-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

usb-host: remove 'remote wakeup' flag from configuration descriptor

If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-host.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.

Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-id: 20200108091044.18055-2-yuri.benditovich@daynix.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

docs: build an index page for the HTML docs

There is no index.html start page for the QEMU HTML documentation.  An
index page is needed so that documentation can be browsed easily on the
web.

This patch adds an index.html.in template file where the QEMU version
number is expanded.  It is written in HTML instead of using the existing
sphinx (rST) and texi documentation generators because they are
heavyweight and would make this harder.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191219135620.1626608-1-stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/libqos: Move the libqos files under tests/qtest/

The qos stuff belongs to qtest, so move it into that directory, too.

Message-Id: <20191218103059.11729-8-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/Makefile: Move qtest-related settings to a separate Makefile.include

tests/Makefile.include is pretty much overcrowded. Now that we have a
dedicated folder for the qtests, let's move the related settings
to a Makefile.include file in that directory instead.

Message-Id: <20191218103059.11729-7-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

test: Move qtests to a separate directory

The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.

Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/Makefile: Separate unit test dependencies from qtest dependencies

Some of the unit test dependencies are declared right in the block of
the qtest dependencies. Let's move them to the other unit tests instead.

Message-Id: <20191218103059.11729-5-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables

It's much easier if we simply add the folder prefix and the exe suffix
later via a substitution instead.

Message-Id: <20191218103059.11729-4-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/ptimer: Remove unnecessary inclusion of libqtest.h

ptimer-test is a unit test, not a qtest, so libqtest.h is not
required here.

Message-Id: <20191218103059.11729-3-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/Makefile: test-char does not need libqtest

No need to link the libqtest objects here.

Message-Id: <20191218103059.11729-2-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)

# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (38 commits)
  chardev: Use QEMUChrEvent enum in IOEventHandler typedef
  chardev: use QEMUChrEvent instead of int
  chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
  monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
  monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
  virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
  vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
  vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
  vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
  ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
  hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
  hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
  hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
  hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
  hw/ipmi: Remove unnecessary declarations
  target/i386: Add missed features to Cooperlake CPU model
  target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
  target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
  hw/rtc/mc146818: Add missing dependency on ISA Bus
  hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200108' into staging

ppc patch queue 2020-01-08

Here's another pull request for qemu-5.0 of ppc related changes.
Highlights are:
 * First parts of support for POWER Secure VMs
 * Rework to clean up how we pass context information to the various
   components of the pnv machine (reduces usage of qdev_get_machine())
 * Assorted cleanups and bugfixes

# gpg: Signature made Wed 08 Jan 2020 05:22:08 GMT
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.0-20200108: (26 commits)
  ppc/pnv: fix check on return value of blk_getlength()
  ppc/pnv: check return value of blk_pwrite()
  pnv/psi: Consolidate some duplicated code in pnv_psi_realize()
  pnv/psi: Add device reset hook
  pnv/xive: Deduce the PnvXive pointer from XiveTCTX::xptr
  spapr/xive: Deduce the SpaprXive pointer from XiveTCTX::xptr
  xive: Add a "presenter" link property to the TCTX object
  ppc/pnv: Add a "pnor" const link property to the BMC internal simulator
  ppc/pnv: Add an "nr-threads" property to the base chip class
  xive: Use the XIVE fabric link under the XIVE router
  spapr, pnv, xive: Add a "xive-fabric" link to the XIVE router
  pnv/xive: Use device_class_set_parent_realize()
  ppc/pnv: Introduce a "xics" property under the POWER8 chip
  ppc/pnv: Introduce a "xics" property alias under the PSI model
  spapr/xive: remove redundant check in spapr_match_nvt()
  ppc/pnv: Drop "num-chips" machine property
  ppc440_bamboo.c: remove label from bamboo_load_device_tree()
  spapr.c: remove 'out' label in spapr_dt_cas_updates()
  ppc/spapr: Don't call KVM_SVM_OFF ioctl on TCG
  spapr/xive: Use device_class_set_parent_realize()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-semihosting-090120-2' into staging

Testing fixes and semiconsole support:

  - build fix (missing x86-iommu stubs)
  - python fixes for freebsd and OSX
  - nicer reporting of acceptance failures
  - fix build nesting of fp-test (breaks bsds)
  - semihosting clean-ups
  - support for blocking semihosting console

# gpg: Signature made Thu 09 Jan 2020 11:42:51 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-semihosting-090120-2:
  tests/tcg: add user version of dumb-as-bricks semiconsole test
  tests/tcg: extract __semi_call into a header and expand
  tests/tcg: add a dumb-as-bricks semihosting console test
  semihosting: add qemu_semihosting_console_inc for SYS_READC
  target/arm: only update pc after semihosting completes
  target/arm: remove unused EXCP_SEMIHOST leg
  testing: don't nest build for fp-test
  travis.yml: install homebrew python for OS X
  travis.yml: duplicate before_script for MacOSX
  travis.yml: Detach build and test steps
  travis.yml: avocado: Print logs of non-pass tests only
  freebsd: use python37
  tests/vm: update openbsd to release 6.6
  hw/i386/x86-iommu: Add missing stubs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

configure: check for gdbus-codegen presence

Some distros ship gdbus-codegen separately for gio headers/pc...

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200110112725.689401-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/tcg: add user version of dumb-as-bricks semiconsole test

There are linux-user users of semihosting so we'd better check things
work for them as well.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

tests/tcg: extract __semi_call into a header and expand

There are two types of ARM semicall - lets test them both. Putting the
logic in a header will make re-using the functions easier later.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

tests/tcg: add a dumb-as-bricks semihosting console test

We don't run this during check-tcg as we would need to check stuff is
echoed back. However we can still build the binary so people can test
it manually.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

semihosting: add qemu_semihosting_console_inc for SYS_READC

Provides a blocking call to read a character from the console using
semihosting.chardev, if specified. This takes some careful command
line options to use stdio successfully as the serial ports, monitor
and semihost all want to use stdio. Here's a sample set of command
line options which share stdio between semihost, monitor and serial
ports:

qemu \
-chardev stdio,mux=on,id=stdio0 \
-serial chardev:stdio0 \
-semihosting-config enable=on,chardev=stdio0 \
-mon chardev=stdio0,mode=readline

This creates a chardev hooked to stdio and then connects all of the
subsystems to it. A shorter mechanism would be good to hear about.

Signed-off-by: Keith Packard <keithp@keithp.com>
Message-Id: <20191104204230.12249-1-keithp@keithp.com>
[AJB: fixed up deadlock, minor commit title reword]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: only update pc after semihosting completes

Before we introduce blocking semihosting calls we need to ensure we
can restart the system on semi hosting exception. To be able to do
this the EXCP_SEMIHOST operation should be idempotent until it finally
completes. Practically this means ensureing we only update the pc
after the semihosting call has completed.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>

target/arm: remove unused EXCP_SEMIHOST leg

All semihosting exceptions are dealt with earlier in the common code
so we should never get here.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>

testing: don't nest build for fp-test

Re-calling the main make is counter-productive and really messes up
with parallel builds. Just ensure we have built the pre-requisites
before we build the fp-test bits. If the user builds manually just
complain if the parent build hasn't got the bits we need.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>

travis.yml: install homebrew python for OS X

Our python3 requirements now outstrip those of the build. While we are
at it we can move more of the special casing for Mac into the one
build we have.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

travis.yml: duplicate before_script for MacOSX

Rather than keep the hack in the global code lets "Think Different"
and have a special copy for MacOSX.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

travis.yml: Detach build and test steps

Currently build and test commands are a single step in a
Travis's `script` block. In order to see the output
of the tests one needs to scroll down the log to find where
the build messages ended and the limit is not clear. If
they were in different steps then Travis would print the
result build command, which can be easily grep'ed.

So this change is made to detach those commands
to ease the visualization of the output.

Note that all steps on the `script` block is executed regardless
if one previous has failed. To overcome it, let's save the
return code of the build then check whether succeed or failed on
the test step.

Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191230184327.2800-3-wainersm@redhat.com>

travis.yml: avocado: Print logs of non-pass tests only

The acceptance tests build on Travis is configured to print
the entire Avocado's job log in case any test fail. Usually one is
interested on failed tests only though. So this change the Travis
configuration in order to show the log of tests which status is
different from 'PASS' and 'SKIP' only. Note that 'CANCEL'-ed tests
will have the log printed too because it can help to debug some
condition on CI environment which is not being fulfilled.

Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191230184327.2800-2-wainersm@redhat.com>

freebsd: use python37

FreeBSD seems to use python37 by default now, which breaks the build
script.  Add python to the package list, to explicitly pick the version,
and also adapt the configure command line.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200106123746.18201-1-kraxel@redhat.com>

tests/vm: update openbsd to release 6.6

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191018102443.26469-1-kraxel@redhat.com>

hw/i386/x86-iommu: Add missing stubs

In commit 6c730e4af9 we introduced a stub to build the MicroVM
machine without Intel IOMMU. This stub is incomplete for the
other PC machines. Add the missing stubs.

Fixes: 6c730e4af9
Reported-by: Travis-CI
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191220154225.25879-1-philmd@redhat.com>

vl: fix memory leak in configure_accelerators

The accel_list forgot to free, the asan output:

Direct leak of 16 byte(s) in 1 object(s) allocated from:
    #0 0xffff919331cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
    #1 0xffff913f7163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
    #2 0xffff91413d9b in g_strsplit (/lib64/libglib-2.0.so.0+0x73d9b)
    #3 0xaaab42fb58e7 in configure_accelerators /qemu/vl.c:2777
    #4 0xaaab42fb58e7 in main /qemu/vl.c:4121
    #5 0xffff8f9b0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
    #6 0xaaab42fc1dab  (/qemu/build/aarch64-softmmu/qemu-system-aarch64+0x8b1dab)

Indirect leak of 4 byte(s) in 1 object(s) allocated from:
    #0 0xffff919331cb in __interceptor_malloc (/lib64/libasan.so.4+0xd31cb)
    #1 0xffff913f7163 in g_malloc (/lib64/libglib-2.0.so.0+0x57163)
    #2 0xffff9141243b in g_strdup (/lib64/libglib-2.0.so.0+0x7243b)
    #3 0xffff91413e6f in g_strsplit (/lib64/libglib-2.0.so.0+0x73e6f)
    #4 0xaaab42fb58e7 in configure_accelerators /qemu/vl.c:2777
    #5 0xaaab42fb58e7 in main /qemu/vl.c:4121
    #6 0xffff8f9b0b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
    #7 0xaaab42fc1dab  (/qemu/build/aarch64-softmmu/qemu-system-aarch64+0x8b1dab)

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200108114207.58084-1-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

arm/translate-a64: fix uninitialized variable warning

Fixes:
target/arm/translate-a64.c: In function 'disas_crypto_three_reg_sha512':
target/arm/translate-a64.c:13625:9: error: 'genfn' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    genfn(tcg_rd_ptr, tcg_rn_ptr, tcg_rm_ptr);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
qemu/target/arm/translate-a64.c:13609:8: error: 'feature' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    if (!feature) {

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200108023915.52288-1-pannengyuan@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

nbd: fix uninitialized variable warning

Fixes:
/mnt/sdb/qemu/nbd/server.c: In function 'nbd_handle_request':
/mnt/sdb/qemu/nbd/server.c:2313:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     int ret;

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200108025132.46956-1-pannengyuan@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

util/module: fix a memory leak

spotted by ASAN

Fixes: 81d8ccb1bea4fb9eaaf4c8e30bd4021180a9a39f
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1576805650-16380-1-git-send-email-pannengyuan@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

MAINTAINERS: Update Yuval Shaia's email address

Use gmail account for maintainer tasks.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20191126102637.2038-1-yuval.shaia@oracle.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>