trace: split out trace events for hw/sparc/ directory

Move all trace-events for files in the hw/sparc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-22-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/dma/ directory

Move all trace-events for files in the hw/dma/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-21-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/timer/ directory

Move all trace-events for files in the hw/timer/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-20-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/input/ directory

Move all trace-events for files in the hw/input/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-19-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/display/ directory

Move all trace-events for files in the hw/display/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-18-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/nvram/ directory

Move all trace-events for files in the hw/nvram/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-17-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/scsi/ directory

Move all trace-events for files in the hw/scsi/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-16-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/usb/ directory

Move all trace-events for files in the hw/usb/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-15-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/misc/ directory

Move all trace-events for files in the hw/misc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/audio/ directory

Move all trace-events for files in the hw/audio/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-13-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/virtio/ directory

Move all trace-events for files in the hw/virtio/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-12-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/net/ directory

Move all trace-events for files in the hw/net/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-11-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/intc/ directory

Move all trace-events for files in the hw/intc/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-10-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/char/ directory

Move all trace-events for files in the hw/char/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-9-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for hw/block/ directory

Move all trace-events for files in the hw/block/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-8-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for block/ directory

Move all trace-events for files in the block/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-7-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for migration/ directory

Move all trace-events for files in the migration/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-6-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for io/ directory

Move all trace-events for files in the io/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-5-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for crypto/ directory

Move all trace-events for files in the crypto/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-4-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: split out trace events for util/ directory

Move all trace-events for files in the util/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-3-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: add build framework for merging trace-events files

Switch make rules over to use trace-events-all as the
master trace events input file. Add rule that will
construct trace-events-all from $(trace-events-y).

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

trace: [all] Add "guest_mem_before" event

The event is described in "trace-events". Note that the "MO_AMASK" flag
is not traced, since it does not seem to affect the visible semantics of
instructions.

[s/inline inline/inline/ to fix clang build.
--Stefan]

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 146549350711.18437.726780393247474362.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

exec: [tcg] Track which vCPU is performing translation and execution

Information is tracked inside the TCGContext structure, and later used
by tracing events with the 'tcg' and 'vcpu' properties.

The 'cpu' field is used to check tracing of translation-time
events ("*_trans"). The 'tcg_env' field is used to pass it to
execution-time events ("*_exec").

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 146549350162.18437.3033661139638458143.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Merge remote-tracking branch 'remotes/otubo/tags/pull-seccomp-20160620' into staging

seccomp branch queue

# gpg: Signature made Mon 20 Jun 2016 10:06:59 BST
# gpg:                using RSA key 0xFD0CFF5B12F8BD2F
# gpg: Good signature from "Eduardo Otubo (Software Engineer @ ProfitBricks) <eduardo.otubo@profitbricks.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1C96 46B6 E1D1 C38A F2EC  3FDE FD0C FF5B 12F8 BD2F

* remotes/otubo/tags/pull-seccomp-20160620:
  seccomp: Add support for ppc/ppc64

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3: Fix compilation with simple trace backend

Fix missing includes of qemu/log.h, which broke compilation with the
simple trace backend (the default backend pulls in log.h implicitly
via trace.h).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Tested-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1466416634-9798-1-git-send-email-peter.maydell@linaro.org

seccomp: Add support for ppc/ppc64

Support for ppc/ppc64 is official in libseccomp 2.3.0, so modify the
configuration script to allow qemuu to enable seccomp for those platforms.

Signed-off-by: Michael Strosaker <strosake@linux.vnet.ibm.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160617' into staging

target-arm queue:
 * GICv3 emulation

# gpg: Signature made Fri 17 Jun 2016 15:24:28 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20160617: (22 commits)
  ACPI: ARM: Present GIC version in MADT table
  hw/timer: Add value matching support to aspeed_timer
  target-arm/monitor.c: Advertise emulated GICv3 in capabilities
  target-arm/machine.c: Allow user to request GICv3 emulation
  hw/intc/arm_gicv3: Add IRQ handling CPU interface registers
  hw/intc/arm_gicv3: Implement CPU i/f SGI generation registers
  hw/intc/arm_gicv3: Implement gicv3_cpuif_update()
  hw/intc/arm_gicv3: Implement GICv3 CPU interface registers
  hw/intc/arm_gicv3: Implement gicv3_set_irq()
  hw/intc/arm_gicv3: Wire up distributor and redistributor MMIO regions
  hw/intc/arm_gicv3: Implement GICv3 redistributor registers
  hw/intc/arm_gicv3: Implement GICv3 distributor registers
  hw/intc/arm_gicv3: Implement functions to identify next pending irq
  hw/intc/arm_gicv3: ARM GICv3 device framework
  hw/intc/arm_gicv3: Add vmstate descriptors
  hw/intc/arm_gicv3: Move irq lines into GICv3CPUState structure
  hw/intc/arm_gicv3: Add state information
  target-arm: Add mp-affinity property for ARM CPU class
  target-arm: Provide hook to tell GICv3 about changes of security state
  target-arm: Define new arm_is_el3_or_mon() function
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-pull-request' into staging

Machine queue, 2016-06-17

# gpg: Signature made Fri 17 Jun 2016 14:45:48 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-pull-request:
  vnc: Wrap vnc initialization code with CONFIG_VNC
  qdev: Use GList for global properties

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ACPI: ARM: Present GIC version in MADT table

In ACPI 5.1 Errata, it adds GIC version in GIC distributor structure.
This is useful for guest kernel to identify which version GIC hardware
is. Update GIC distributor structure and present GIC version in MADT
table.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465960955-17388-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/timer: Add value matching support to aspeed_timer

Value matching allows Linux to boot with CONFIG_NO_HZ_IDLE=y on the
palmetto-bmc machine. Two match registers are provided for each timer.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1465974248-20434-1-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm/monitor.c: Advertise emulated GICv3 in capabilities

Now we have an emulated GICv3 we should advertise it via the
capabilities in the monitor protocol.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-21-git-send-email-peter.maydell@linaro.org

target-arm/machine.c: Allow user to request GICv3 emulation

Now we have an emulated GICv3, remove the restriction in
gicv3_class_name() so that the user can request a GICv3 with
-machine gic-version=3 even when not using KVM.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-20-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: Add IRQ handling CPU interface registers

Add the CPU interface registers which deal with acknowledging
and dismissing interrupts.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-19-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: Implement CPU i/f SGI generation registers

Implement the registers in the GICv3 CPU interface which generate
new SGI interrupts.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-18-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: Implement gicv3_cpuif_update()

Implement the gicv3_cpuif_update() function which deals with correctly
asserting IRQ and FIQ based on the current running priority of the CPU,
the priority of the highest priority pending interrupt and the CPU's
current exception level and security state.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-17-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: Implement GICv3 CPU interface registers

Implement the CPU interface registers for the GICv3; these are
CPU system registers, not MMIO registers.

This commit implements all the registers which are simple
accessors for GIC state, but not those which act as interfaces
for acknowledging, dismissing or generating interrupts. (Those
will be added in a later commit.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-16-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: Implement gicv3_set_irq()

Implement the code which updates the GIC state when an interrupt
input into the GIC is asserted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-15-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: Wire up distributor and redistributor MMIO regions

Wire up the MMIO functions exposed by the distributor and the
redistributor into MMIO regions exposed by the GICv3 device.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-14-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: Implement GICv3 redistributor registers

Implement the redistributor registers of a GICv3.

Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-13-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled/rewritten:
 * use the new data structures
 * restructure register read/write to handle different width accesses
   natively, since almost all registers are 32-bit only, rather
   than implementing everything as byte accesses
 * implemented security extension support
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3: Implement GICv3 distributor registers

Implement the distributor registers of a GICv3.

Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-12-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled/rewritten:
 * use the new bitmap data structures
 * restructure register read/write to handle different width accesses
   natively, since almost all registers are 32-bit only, rather
   than implementing everything as byte accesses
 * implemented security extension support
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3: Implement functions to identify next pending irq

Implement the GICv3 logic to recalculate the highest priority pending
interrupt for each CPU after some part of the GIC state has changed.
We avoid unnecessary full recalculation where possible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-11-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: ARM GICv3 device framework

This patch includes the device class itself, some ID register
value functions which will be needed by both distributor
and redistributor, and some skeleton functions for handling
interrupts coming in and going out, which will be filled in
in a subsequent patch.

Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-10-git-send-email-peter.maydell@linaro.org
[PMM: pulled this patch earlier in the sequence, and left
 some code out of it for a later patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>

hw/intc/arm_gicv3: Add vmstate descriptors

Add state structure descriptors for the GICv3 state. We mark
the KVM GICv3 device as having a migration blocker until the
code to save and restore the state in the kernel is implemented.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-9-git-send-email-peter.maydell@linaro.org
[PMM: Adjust to renamed struct fields; switched to using uint32_t
 array backed bitmaps; add migration blocker setting]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3: Move irq lines into GICv3CPUState structure

Move the GICv3 parent_irq and parent_fiq pointers into the
GICv3CPUState structure rather than giving them their own array.
This will make it easy to assert the IRQ and FIQ lines for a
particular CPU interface without having to know or calculate
the CPU index for the GICv3CPUState we are working on.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-8-git-send-email-peter.maydell@linaro.org

hw/intc/arm_gicv3: Add state information

Add state information to GICv3 object structure and implement
arm_gicv3_common_reset().

This commit includes accessor functions for the fields which are
stored as bitmaps in uint32_t arrays.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-7-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled:
 * Add missing qom/cpu.h include
 * Remove legacy-only state fields (we can add them later if/when we add
   legacy emulation)
 * Use arrays of uint32_t to store the various distributor bitmaps,
   and provide accessor functions for the various set/test/etc operations
 * Add various missing register offset #defines
 * Accessor macros which combine distributor and redistributor behaviour
   removed
 * Fields in state structures renamed to match architectural register names
 * Corrected the reset value for GICR_IENABLER0 since we don't support
   legacy mode
 * Added ARM_LINUX_BOOT_IF interface for "we are directly booting a kernel in
   non-secure" so that we can fake up the firmware-mandated reconfiguration
   only when we need it
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>

target-arm: Add mp-affinity property for ARM CPU class

This allows to override default affinity IDs on a per-machine basis, and
possibility to retrieve IDs will be used by vGICv3 live migration code.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-6-git-send-email-peter.maydell@linaro.org

target-arm: Provide hook to tell GICv3 about changes of security state

The GICv3 CPU interface needs to know when the CPU it is attached
to makes an exception level or mode transition that changes the
security state, because whether it is asserting IRQ or FIQ can change
depending on these things. Provide a mechanism for letting the GICv3
device register a hook to be called on such changes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-5-git-send-email-peter.maydell@linaro.org

target-arm: Define new arm_is_el3_or_mon() function

The GICv3 system registers need to know if the CPU is AArch64
in EL3 or AArch32 in Monitor mode. This happens to be the first
part of the check for arm_is_secure(), so factor it out into a
new arm_is_el3_or_mon() function that the GIC can also use.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-4-git-send-email-peter.maydell@linaro.org

bitops.h: Implement half-shuffle and half-unshuffle ops

A half-shuffle operation takes a word with zeros in the high half:
 0000 0000 0000 0000 ABCD EFGH IJKL MNOP
and spreads the bits out so they are in every other bit of the word:
 0A0B 0C0D 0E0F 0G0H 0I0J 0K0L 0M0N 0O0P
A half-unshuffle performs the reverse operation.

Provide functions in bitops.h which implement these operations
for 32-bit and 64-bit inputs, and add tests for them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-3-git-send-email-peter.maydell@linaro.org

migration: Define VMSTATE_UINT64_2DARRAY

Define a VMSTATE_UINT64_2DARRAY macro, to go with the ones we
already have for other type sizes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-2-git-send-email-peter.maydell@linaro.org

nbd/client.c: Correct trace format string

The trace format string in nbd_send_request uses PRIu16 for
request->type, but request->type is a uint32_t. This provokes
compiler warnings on the OSX clang. Use PRIu32 instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1466167331-17063-1-git-send-email-peter.maydell@linaro.org

vnc: Wrap vnc initialization code with CONFIG_VNC

commit f8c75b2486 (vnc: Initialization stubs) removed CONFIG_VNC in vl.c
code. However qemu_find_opts("vnc") is NULL when vnc is configured out.
Crash will happen in qemu_opts_foreach() before stub vnc_init_func() is
called. This patch add it back.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

qdev: Use GList for global properties

If the same GlobalProperty struct is registered twice, the list
entry gets corrupted, making tqe_next points to itself, and
qdev_prop_set_globals() gets stuck in a loop. The bug can be
easily reproduced by running:

  $ qemu-system-x86_64 -rtc-td-hack -rtc-td-hack

Change global_props to use GList instead of queue.h, making the
code simpler and able to deal with properties being registered
twice.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.7-5' into staging

Migration:

 - many compression/decompression fixes
 - trace improvements
 - static checker fix for detecting size mismatch in unused fields
 - fix VM save after snapshot

# gpg: Signature made Fri 17 Jun 2016 13:59:44 BST
# gpg:                using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337  2735 1E9A 3B5F 8540 83B6
#      Subkey fingerprint: CC63 D332 AB8F 4617 4529  6534 EB0B 4DFC 657E F670

* remotes/amit-migration/tags/migration-for-2.7-5:
  vmstate-static-checker: fix size mismatch detection in unused fields
  migration: code clean up
  migration: refine the decompression code
  migration: refine the compression code
  migration: protect the quit flag by lock
  migration: refine ram_save_compressed_page
  qemu-file: Fix qemu_put_compression_data flaw
  migration: remove useless code
  migration: Fix a potential issue
  migration: Fix multi-thread compression bug
  migration: fix inability to save VM after snapshot
  migration: Trace improvements
  migration: Don't use *_to_cpup() and cpu_to_*w()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

vmstate-static-checker: fix size mismatch detection in unused fields

If a field changed from something to unused, the checker wasn't flagging
if the field size mismatched.  This was noticed in:

http://thread.gmane.org/gmane.comp.emulators.qemu/419802

where the 4->1 size change along with field name change to 'unused'
wasn't being flagged.  Fix this.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <d7ec03a9b2edfa0616764887a51ba8f64fdd3f68.1466165736.git.amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: code clean up

Use 'QemuMutex comp_done_lock' and 'QemuCond comp_done_cond' instead
of 'QemuMutex *comp_done_lock' and 'QemuCond comp_done_cond'. To keep
consistent with 'QemuMutex decomp_done_lock' and
'QemuCond comp_done_cond'.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-10-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: refine the decompression code

The current code for multi-thread decompression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-9-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: refine the compression code

The current code for multi-thread compression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-8-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: protect the quit flag by lock

quit_comp_thread and quit_decomp_thread are accessed by several
thread, it's better to protect them with locks. We use a per
thread flag to replace the global one, and the new flag is protected
by a lock.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-7-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: refine ram_save_compressed_page

Use qemu_put_compression_data to do the compression directly
instead of using do_compress_ram_page, avoid some data copy.
very small improvement, at the same time, add code to check
if the compression is successful.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-6-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

qemu-file: Fix qemu_put_compression_data flaw

Current qemu_put_compression_data can only work with no writable
QEMUFile, and can't work with the writable QEMUFile. But it does
not provide any measure to prevent users from using it with a
writable QEMUFile.

We should fix this flaw to make it works with writable QEMUFile.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-5-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: remove useless code

page_buffer is set twice repeatedly, remove the previous set.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-4-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: Fix a potential issue

At the end of live migration and before vm_start() on the destination
side, we should make sure all the decompression tasks are finished, if
this can not be guaranteed, the VM may get the incorrect memory data,
or the updated memory may be overwritten by the decompression thread.
Add the code to fix this potential issue.

Suggested-by: David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-3-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: Fix multi-thread compression bug

Recently, a bug related to multiple thread compression feature for
live migration is reported. The destination side will be blocked
during live migration if there are heavy workload in host and
memory intensive workload in guest, this is most likely to happen
when there is one decompression thread.

Some parts of the decompression code are incorrect:
1. The main thread receives data from source side will enter a busy
loop to wait for a free decompression thread.
2. A lock is needed to protect the decomp_param[idx]->start, because
it is checked in the main thread and is updated in the decompression
thread.

Fix these two issues by following the code pattern for compression.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: fix inability to save VM after snapshot

The following sequence of operations fails:
    virsh start vm
    virsh snapshot-create vm
    virshh save vm --file file
with the following error
    error: Failed to save domain vm to file
    error: internal error: unable to execute QEMU command 'migrate':
    There's a migration process in progress

The problem is that qemu_savevm_state() calls migrate_init() which sets
migration state to MIGRATION_STATUS_SETUP and never cleaned it up.
This patch do the job.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1466003203-26263-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: Trace improvements

A couple of improvements to tracing that have come out of helping
people with migration problems:
  * vmstate_n_elems trace the count/name - for when you have problems
    getting array counts right
  * vmstate_subsection_load_bad - add the idstr, for when you receive a
    subsection you weren't expecting.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465896986-16132-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

migration: Don't use *_to_cpup() and cpu_to_*w()

The *_to_cpup() and cpu_to_*w() functions just compose a pointer
dereference with a byteswap. Instead use ld*_p() and st*_p(),
which handle potential pointer misalignment and avoid the need
to cast the pointer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1465574962-2710-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160617' into staging

ppc patch queue for 2016-06-17

Here's the current accumulated set of spapr, ppc and related patches.
  * The big thing in here is CPU hotplug for spapr
    - This includes a number of acked generic changes adding new
      infrastructure for hotplugging cpu cores
  * A number of TCG bug fixes are also included
  * This adds a new testcase to make it harder to accidentally break
    Macintosh (and other openbios) platforms

# gpg: Signature made Fri 17 Jun 2016 07:35:29 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.7-20160617:
  spapr: implement query-hotpluggable-cpus callback
  hmp: Add 'info hotpluggable-cpus' HMP command
  QMP: Add query-hotpluggable-cpus
  spapr: CPU hot unplug support
  spapr: CPU hotplug support
  spapr: convert boot CPUs into CPU core devices
  spapr: Move spapr_cpu_init() to spapr_cpu_core.c
  spapr: Abstract CPU core device and type specific core devices
  qom: API to get instance_size of a type
  spapr_drc: Prevent detach racing against attach for CPU DR
  xics,xics_kvm: Handle CPU unplug correctly
  cpu: Abstract CPU core type
  qdev: hotplug: Introduce HotplugHandler.pre_plug() callback
  target-ppc: Fix rlwimi, rlwinm, rlwnm
  vfio: Fix broken EEH
  target-ppc: Bug in BookE wait instruction
  ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully
  hw/ppc/spapr: Silence deprecation message in qtest mode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, pci, virtio: new features, cleanups, fixes

Beginning of reconnect support for vhost-user.
Misc cleanups and fixes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 17 Jun 2016 01:28:39 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  MAINTAINERS: add Marcel to PCI
  msi_init: change return value to 0 on success
  fix some coding style problems
  pci core: assert ENOSPC when add capability
  test: start vhost-user reconnect test
  tests: append i386 tests
  vhost-net: save & restore vring enable state
  vhost-net: save & restore vhost-user acked features
  vhost-net: do not crash if backend is not present
  vhost-user: disconnect on start failure
  qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd
  tests/vhost-user-bridge: workaround stale vring base
  tests/vhost-user-bridge: add client mode
  vhost-user: add ability to know vhost-user backend disconnection
  pci: fix pci_requester_id()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
tests/Makefile.include

spapr: implement query-hotpluggable-cpus callback

It returns a list of present/possible to hotplug CPU
objects with a list of properties to use with
device_add.

in spapr case returned list would looks like:
-> { "execute": "query-hotpluggable-cpus" }
<- {"return": [
     { "props": { "core": 8 }, "type": "POWER8-spapr-cpu-core",
       "vcpus-count": 2 },
     { "props": { "core": 0 }, "type": "POWER8-spapr-cpu-core",
       "vcpus-count": 2,
       "qom-path": "/machine/unattached/device[0]"}
   ]}'

TODO:
  add 'node' property for core <-> numa node mapping

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

hmp: Add 'info hotpluggable-cpus' HMP command

This is the HMP equivalent for QMP query-hotpluggable-cpus.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Fixed problem with printf formats on 32-bit host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

QMP: Add query-hotpluggable-cpus

It will allow mgmt to query present and hotpluggable CPU objects,
it is required from a target platform that wishes to support command
to implement and set MachineClass.query_hotpluggable_cpus callback,
which will return a list of possible CPU objects with options that
would be needed for hotplugging possible CPU objects.

There are:
'type': 'str' - QOM CPU object type for usage with device_add
'vcpus-count': 'int' - number of logical VCPU threads per
                        CPU object (mgmt needs to know)

and a set of optional fields that are to used for hotplugging a CPU
objects and would allows mgmt tools to know what/where it could be
hotplugged;
[node],[socket],[core],[thread]

For present CPUs there is a 'qom-path' field which would allow mgmt to
inspect whatever object/abstraction the target platform considers
as CPU object.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr: CPU hot unplug support

Remove the CPU core device by removing the underlying CPU thread devices.
Hot removal of CPU for sPAPR guests is achieved by sending the hot unplug
notification to the guest. Release the vCPU object after CPU hot unplug so
that vCPU fd can be parked and reused.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr: CPU hotplug support

Set up device tree entries for the hotplugged CPU core and use the
exising RTAS event logging infrastructure to send CPU hotplug notification
to the guest.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr: convert boot CPUs into CPU core devices

Introduce sPAPRMachineClass.dr_cpu_enabled to indicate support for
CPU core hotplug. Initialize boot time CPUs as core deivces and prevent
topologies that result in partially filled cores. Both of these are done
only if CPU core hotplug is supported.

Note: An unrelated change in the call to xics_system_init() is done
in this patch as it makes sense to use the local variable smt introduced
in this patch instead of kvmppc_smt_threads() call here.

TODO: We derive sPAPR core type by looking at -cpu <model>. However
we don't take care of "compat=" feature yet for boot time as well
as hotplug CPUs.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr: Move spapr_cpu_init() to spapr_cpu_core.c

Start consolidating CPU init related routines in spapr_cpu_core.c. As
part of this, move spapr_cpu_init() and its dependencies from spapr.c
to spapr_cpu_core.c

No functionality change in this patch.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Rename TIMEBASE_FREQ to SPAPR_TIMEBASE_FREQ, since it's now in a
 public(ish) header]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr: Abstract CPU core device and type specific core devices

Add sPAPR specific abastract CPU core device that is based on generic
CPU core device. Use this as base type to create sPAPR CPU specific core
devices.

TODO:
- Add core types for other remaining CPU types
- Handle CPU model alias correctly

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

qom: API to get instance_size of a type

Add an API object_type_get_size(const char *typename) that returns the
instance_size of the give typename.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr_drc: Prevent detach racing against attach for CPU DR

If a CPU is hot removed while hotplug of the same is still in progress,
the guest crashes. Prevent this by ensuring that detach is done only
after attach has completed.

The existing code already prevents such race for PCI hotplug. However
given that CPU is a logical DR unlike PCI and starts with ISOLATED
state, we need a logic that works for CPU too.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
               [Don't set awaiting_attach for PCI devices]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

xics,xics_kvm: Handle CPU unplug correctly

XICS is setup for each CPU during initialization. Provide a routine
to undo the same when CPU is unplugged. While here, move ss->cs management
into xics from xics_kvm since there is nothing KVM specific in it.
Also ensure xics reset doesn't set irq for CPUs that are already unplugged.

This allows reboot of a VM that has undergone CPU hotplug and unplug
to work correctly.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

cpu: Abstract CPU core type

Add an abstract CPU core type that could be used by machines that want
to define and hotplug CPUs in core granularity.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
               [Integer core property]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[dwg: changed property names to 'core-id' and 'nr-threads']
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

qdev: hotplug: Introduce HotplugHandler.pre_plug() callback

pre_plug callback is to be called before device.realize() is executed.
This would allow to check/set device's properties from HotplugHandler.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: Fix rlwimi, rlwinm, rlwnm

In 63ae0915f8ec, I arranged to use a 32-bit rotate, without
considering the effect of a mask value that wraps around to
the high bits of the word.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

vfio: Fix broken EEH

vfio_eeh_container_op() is the backend that communicates with
host kernel to support EEH functionality in QEMU. However, the
functon should return the value from host kernel instead of 0
unconditionally.

dwg: Specifically the problem occurs for the handful of EEH
sub-operations which can return a non-zero, non-error result.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[dwg: clarification to commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target-ppc: Bug in BookE wait instruction

Fixed bug in code generation for the PowerPC "wait" instruction. It
doesn't make sense to store a non-initialized register.

Signed-off-by: Jakub Horak <thement@ibawizard.net>
[dwg: revised commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc / sparc: Add a tester for checking whether OpenBIOS runs successfully

Since the mac99 and g3beige PowerPC machines recently broke without
being noticed, it would be good to have a tester for "make check"
that detects such issues immediately. A simple way to test the firmware
of these machines is to use the "-prom-env" parameter of QEMU. This
parameter can be used to put some Forth code into the 'boot-command'
firmware variable which then can signal success to the tester by
writing a magic value to a known memory location. And since some of the
Sparc machines are also using OpenBIOS, they are now tested with this
prom-env-tester, too.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Removed sparc64, because it trips a TCG bug on 32-bit hosts]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

MAINTAINERS: add Marcel to PCI

Marcel is reviewing PCI patches anyway, things will
be easier if people remember to Cc him.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

msi_init: change return value to 0 on success

No caller use its return value as msi capability offset, also in order
to make its return behaviour consistent with msix_init().

cc: Michael S. Tsirkin <mst@redhat.com>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Hannes Reinecke <hare@suse.de>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>

Acked-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

fix some coding style problems

It has:
1. More newlines make the code block well separated.
2. Add more comments for msi_init.
3. Fix a indentation in vmxnet3.c.
4. ioh3420 & xio3130_downstream: put PCI Express capability init function
   together, make it more readable.

cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Jason Wang <jasowang@redhat.com>

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pci core: assert ENOSPC when add capability

ENOSPC is programming error, assert it for debugging.

cc: Michael S. Tsirkin <mst@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

test: start vhost-user reconnect test

This is a simple reconnect test, that simply checks if vhost-user
reconnection is possible and restore the state. A more complete test
would actually manipulate and check the ring contents (such extended
testing would benefit from the libvhost-user proposed in QEMU list to
avoid duplication of ring manipulations)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests: append i386 tests

Do not overwrite x86-64 tests, re-enable vhost-user-test.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost-net: save & restore vring enable state

A driver may change the vring enable state at run time but vhost-user
backend may not be present (a contrived example is when the backend is
disconnected and the device is reconfigured after driver rebinding)

Restore the vring state when the vhost-user backend is started, so it
can process the ring.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost-net: save & restore vhost-user acked features

The initial vhost-user connection sets the features to be negotiated
with the driver. Renegotiation isn't possible without device reset.

To handle reconnection of vhost-user backend, ensure the same set of
features are provided, and reuse already acked features.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost-net: do not crash if backend is not present

Do not crash when backend is not present while enabling the ring. A
following patch will save the enabled state so it can be restored once
the backend is started.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost-user: disconnect on start failure

If the backend failed to start (for example feature negociation failed),
do not exit, but disconnect the char device instead. Slightly more
robust for reconnect case.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd

The patch introduces qemu_chr_disconnect(). The function is used for
closing a fd accepted by listen fd. Though we already have qemu_chr_delete(),
but it closes not only accepted fd but also listen fd. This new function
is used when we still want to keep listen fd.

Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests/vhost-user-bridge: workaround stale vring base

This patch is a similar solution to what Yuanhan Liu/Huawei Xie have
suggested for DPDK. When vubr quits (killed or crashed), a restart of
vubr would get stale vring base from QEMU. That would break the kernel
virtio net completely, making it non-work any more, unless a driver
reset is done.

So, instead of getting the stale vring base from QEMU, Huawei suggested
we could get a proper one from used->idx. This works because the queues
packets are processed in order.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests/vhost-user-bridge: add client mode

If -c is specified, vubr will try to connect to the socket instead of
listening for connections.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost-user: add ability to know vhost-user backend disconnection

Current QEMU cannot detect vhost-user backend disconnection. The
patch adds ability to know it.
To know disconnection, add watcher to detect G_IO_HUP event. When
G_IO_HUP event is detected, the disconnected socket will be read
to cause a CHR_EVENT_CLOSED.

Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>