git.maquefel.me Git - linux.git/log

RDMA/cxgb4: add null-ptr-check after ip_dev_find()

[ Upstream commit ef42520240aacfc0d46c8d780c051d135a8dc9b7 ]

ip_dev_find() may return NULL and assign it to pdev which is
dereferenced later.
Fix this by checking the return value of ip_dev_find() for NULL
similar to the way it is done with other instances of said function.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 1cab775c3e75 ("RDMA/cxgb4: Fix LE hash collision bug for passive open connection")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230201172103.17261-1-n.zhandarovich@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case

[ Upstream commit 9ad9df8447547febe9dd09b040f4528a09e495f0 ]

The RXWATER value must be greater than 0 according to the LPUART
reference manual. And when the number of datawords in the receive
FIFO is greater than RXWATER, an interrupt or a DMA request is
generated, so no need to set the different value for lpuart interrupt
case and dma case. Here delete the wrong RXWATER setting for dma case
directly.

Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230130064449.9564-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: early: xhci-dbc: Fix a potential out-of-bound memory access

[ Upstream commit a4a97ab3db5c081eb6e7dba91306adefb461e0bd ]

If xdbc_bulk_write() fails, the values in 'buf' can be anything. So the
string is not guaranteed to be NULL terminated when xdbc_trace() is called.

Reserve an extra byte, which will be zeroed automatically because 'buf' is
a static variable, in order to avoid troubles, should it happen.

Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d6a7562c5e839a195cee85db6dc81817f9372cb1.1675016180.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers

[ Upstream commit 13b6299cf66165a442089fa895a7f70250703584 ]

Interleaved DMA transfer support was added by 85e7518f42c8 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support"), but depending on the
selected channel, either source or destination address are left
uninitialized which was obviously wrong.

Initialize the destination address of the eDMA burst descriptors for
DEV_TO_MEM interleaved operations and the source address for MEM_TO_DEV
operations.

Link: https://lore.kernel.org/r/20230113171409.30470-5-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Add missing completion handler

[ Upstream commit e55f67391fa986f7357edba0ca59e668d99c3a5f ]

This is used when responding to GET_STATUS requests. Without this, it
crashes on completion.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230123073508.2350402-2-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle

[ Upstream commit 18e126e97c961f7a93823795c879d7c085fe5098 ]

KASAN reported a null-ptr-deref error:

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 1373 Comm: modprobe
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:dmi_sysfs_entry_release
...
Call Trace:
<TASK>
kobject_put
dmi_sysfs_register_handle (drivers/firmware/dmi-sysfs.c:540) dmi_sysfs
dmi_decode_table (drivers/firmware/dmi_scan.c:133)
dmi_walk (drivers/firmware/dmi_scan.c:1115)
dmi_sysfs_init (drivers/firmware/dmi-sysfs.c:149) dmi_sysfs
do_one_initcall (init/main.c:1296)
...
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x4000000 from 0xffffffff81000000
---[ end Kernel panic - not syncing: Fatal exception ]---

It is because previous patch added kobject_put() to release the memory
which will call dmi_sysfs_entry_release() and list_del().

However, list_add_tail(entry->list) is called after the error block,
so the list_head is uninitialized and cannot be deleted.

Move error handling to after list_add_tail to fix this.

Fixes: 660ba678f999 ("firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221111015326.251650-2-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: transport_class: fix resource leak when transport_add_device() fails

[ Upstream commit e5da06b27ff5a148e42265c8e306670a9d913969 ]

The normal call sequence of using transport class is:

Add path:
transport_setup_device()
  transport_setup_classdev()  // call sas_host_setup() here
transport_add_device()       // if fails, need call transport_destroy_device()
transport_configure_device()

Remove path:
transport_remove_device()
  transport_remove_classdev  // call sas_host_remove() here
transport_destroy_device()

If transport_add_device() fails, need call transport_destroy_device()
to free memory, but in this case, ->remove() is not called, and the
resources allocated in ->setup() are leaked. So fix these leaks by
calling ->remove() in transport_add_class_device() if it returns error.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221115031638.3816551-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: transport_class: fix possible memory leak

[ Upstream commit a86367803838b369fe5486ac18771d14723c258c ]

Current some drivers(like iscsi) call transport_register_device()
failed, they don't call transport_destroy_device() to release the
memory allocated in transport_setup_device(), because they don't
know what was done, it should be internal thing to release the
resource in register function. So fix this leak by calling destroy
function inside register function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110102307.3492557-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fix resource leak in device_add()

[ Upstream commit 6977b1a5d67097eaa4d02b0c126c04cc6e8917c0 ]

When calling kobject_add() failed in device_add(), it will call
cleanup_glue_dir() to free resource. But in kobject_add(),
dev->kobj.parent has been set to NULL. This will cause resource leak.

The process is as follows:
device_add()
get_device_parent()
class_dir_create_and_add()
kobject_add() //kobject_get()
...
dev->kobj.parent = kobj;
...
kobject_add() //failed, but set dev->kobj.parent = NULL
...
glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto
//"Error" label
...
cleanup_glue_dir() //becaues glue_dir is NULL, not call
//kobject_put()

The preceding problem may cause insmod mac80211_hwsim.ko to failed.
sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim'
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x224/0x280
kobject_add_internal+0x2aa/0x880
kobject_add+0x135/0x1a0
get_device_parent+0x3d7/0x590
device_add+0x2aa/0x1cb0
device_create_groups_vargs+0x1eb/0x260
device_create+0xdc/0x110
mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim]
init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim]
do_one_initcall+0x10f/0x630
do_init_module+0x19f/0x5e0
load_module+0x64b7/0x6eb0
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to
register things with the same name in the same directory.

Fixes: cebf8fd16900 ("driver core: fix race between creating/querying glue dir and its cleanup")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221123012042.335252-1-shaozhengchao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc/mei/hdcp: Use correct macros to initialize uuid_le

[ Upstream commit 512ba04d8211dd1a54dd36adc3ecc527a28069c5 ]

GUID_INIT() is for internal guid_t type and shouldn't be used
for the uuid_le. I.o.w. relying on the implementation details
is layering violation. Use correct macros to initialize uuid_le.

Fixes: 64e9bbdd9588 ("misc/mei/hdcp: Client driver for HDCP application")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221228160500.21220-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF

[ Upstream commit 1a726cb47fd204109c767409fa9ca15a96328f14 ]

The call to get_user_pages_fast() in vmci_host_setup_notify() can return
NULL context->notify_page causing a GPF. To avoid GPF check if
context->notify_page == NULL and return error if so.

general protection fault, probably for non-canonical address
0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x0005088000000300-
0x0005088000000307]
CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1
Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014
RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0
Call Trace:
<TASK>
vmci_host_unlocked_ioctl+0x362/0x1f40
__x64_sys_ioctl+0x1a1/0x230
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe()

[ Upstream commit 9175ee1a99d57ec07d66ff572e1d5a724477ab37 ]

In error path in stratix10_svc_drv_probe(), gen_pool_destroy() should be called
to destroy the memory pool that created by svc_create_memory_pool().

Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221129163602.462369-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

applicom: Fix PCI device refcount leak in applicom_init()

[ Upstream commit ce4273d89c52167d6fe20572136c58117eae0657 ]

As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.

If we break the loop in applicom_init() with 'dev' not NULL, we need to
call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221122114035.24194-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eeprom: idt_89hpesx: Fix error handling in idt_init()

[ Upstream commit d717a3ab282f51ec45142f911f7ef8a55c057de5 ]

A problem about idt_89hpesx create debugfs failed is triggered with the
following log given:

[ 4973.269647] debugfs: Directory 'idt_csr' with parent '/' already present!

The reason is that idt_init() returns i2c_add_driver() directly without
checking its return value, if i2c_add_driver() failed, it returns without
destroy the newly created debugfs, resulting the debugfs of idt_csr can
never be created later.

idt_init()
   debugfs_create_dir() # create debugfs directory
   i2c_add_driver()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without destroy debugfs directory

Fix by removing debugfs when i2c_add_driver() returns error.

Fixes: cfad6425382e ("eeprom: Add IDT 89HPESx EEPROM/CSR driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20221110020030.47711-1-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol"

[ Upstream commit 70fae37a09268455b8ab4f64647086b61da6f39c ]

This reverts commit be826ada52f1fcabed5b5217c94609ebf5967211.

The function monitor_card() is a timer handler that runs in an
atomic context, but it calls usleep_range() that can sleep.
As a result, the sleep-in-atomic-context bugs will happen.
The process is shown below:

    (atomic context)
monitor_card()
  set_protocol()
    usleep_range() //sleep

The origin commit c1986ee9bea3 ("[PATCH] New Omnikey Cardman
4000 driver") works fine.

Fixes: be826ada52f1 ("char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20230118141000.5580-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()

[ Upstream commit 38f28cfe9d08e3a47ef008798b275fef8118fc20 ]

Add the missing clk_disable_unprepare() before return from
tegra_uart_hw_init() in the error handling path.
When request_irq() fails in tegra_uart_startup(), 'tup->uart_clk'
has been enabled, fix it by adding clk_disable_unprepare().

Fixes: cc9ca4d95846 ("serial: tegra: Only print FIFO error message when an error occurs")
Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Link: https://lore.kernel.org/r/20221126020852.113378-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown()

[ Upstream commit 4029dfc034febb54f6dd8ea83568accc943bc088 ]

The LPUART Status Register needs to be cleared when closing the uart
port to get a clean environment when reopening the uart.

Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221125101953.18753-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()

[ Upstream commit 1d4bd0e4ae4ba95892bef919a8d4d3f08f122d7e ]

UARTBAUD_RDMAE and UARTBAUD_TDMAE are enabled in lpuart32_startup(), but
lpuart32_shutdown() not disable them, only free the dma ring buffer and
release the dma channels, so here disable the Rx/Tx DMA first in
lpuart32_shutdown().

Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221125101953.18753-3-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: switchtec: Return -EFAULT for copy_to_user() errors

[ Upstream commit ddc10938e08cd7aac63d8385f7305f7889df5179 ]

switchtec_dev_read() didn't handle copy_to_user() errors correctly: it
assigned "rc = -EFAULT", but actually returned either "size", -ENXIO, or
-EBADMSG instead.

Update the failure cases to unlock mrpc_mutex and return -EFAULT directly.

Link: https://lore.kernel.org/r/20221216162126.207863-3-helgaas@kernel.org
Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/IOV: Enlarge virtfn sysfs name buffer

[ Upstream commit ea0b5aa5f184cf8293c93163f0fb00505190d431 ]

The sysfs link name "virtfn%u" constructed by pci_iov_sysfs_link() requires
17 bytes to contain the longest possible string. Increase VIRTFN_ID_LEN to
accommodate that.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

[bhelgaas: commit log, comment at #define]
Fixes: dd7cc44d0bce ("PCI: add SR-IOV API for Physical Function driver")
Link: https://lore.kernel.org/r/20221218033347.23743-1-gremlin@altlinux.org
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count

[ Upstream commit c3194949ae8fcbe2b7e38670e7c6a5cfd2605edc ]

When acpi_dev_get_memory_resources() fails, the reference count is
left bumped. Drop it as it's done in the other error paths.

Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230102202933.15968-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: intel_pmc_mux: Use the helper acpi_dev_get_memory_resources()

[ Upstream commit 1538dc8c1561f0de4ba57a69e2a421a1a3951618 ]

It removes the need to check the resource data type
separately.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c3194949ae8f ("usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: resource: Add helper function acpi_dev_get_memory_resources()

[ Upstream commit 6bb057bfd9d509755349cd2a6ca5e5e6e6071304 ]

Wrapper function that finds all memory type resources by
using acpi_dev_get_resources(). It removes the need for the
drivers to check the resource data type separately.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c3194949ae8f ("usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count")
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: cti: Add PM runtime call in enable_store

[ Upstream commit eff674a9b86a6ffdd10c3af3863545acf7f1ce4f ]

In commit 6746eae4bbad ("coresight: cti: Fix hang in cti_disable_hw()")
PM runtime calls are removed from cti_enable_hw/cti_disable_hw. When
enabling CTI by writing enable sysfs node, clock for accessing CTI
register won't be enabled. Device will crash due to register access
issue. Add PM runtime call in enable_store to fix this issue.

Fixes: 6746eae4bbad ("coresight: cti: Fix hang in cti_disable_hw()")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
[Change to only call pm_runtime_put if a disable happened]
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-3-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: cti: Prevent negative values of enable count

[ Upstream commit 3244fb6dbbf1ffc114cdf382cc167bdd8c18088a ]

Writing 0 to the enable control repeatedly results in a negative value
for enable_req_count. After this, writing 1 to the enable control
appears to not work until the count returns to positive.

Change it so that it's impossible for enable_req_count to be < 0.
Return an error to indicate that the disable request was invalid.

Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR

[ Upstream commit 589d928248b72f8377d45904a14bcf686aa8bbeb ]

The TRCSEQRSTEVR and TRCSEQSTR registers are not implemented if the
TRCIDR5.NUMSEQSTATE == 0. Skip accessing the registers in such cases.

Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114091632.60095-1-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()

[ Upstream commit 9f582f0418ed1c18f92c9e4628075d6ec9a7d9fb ]

Check for inactive controls in uvc_ctrl_is_accessible().

Use the new value for the master_id controls if present, otherwise
use the existing value to determine if it is OK to set the control.
Doing this here avoids attempting to set an inactive control, which
will return an error from the USB device, which returns an invalid
errorcode.

This fixes:
  warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO
  warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO
test VIDIOC_G/S_CTRL: OK
  warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO
  warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO
  warn: v4l2-test-controls.cpp(816): s_ext_ctrls returned EIO
test VIDIOC_G/S/TRY_EXT_CTRLS: OK

Tested with:
v4l2-ctl -c auto_exposure=1
OK
v4l2-ctl -c exposure_time_absolute=251
OK
v4l2-ctl -c auto_exposure=3
OK
v4l2-ctl -c exposure_time_absolute=251
VIDIOC_S_EXT_CTRLS: failed: Input/output error
exposure_time_absolute: Input/output error
ERROR
v4l2-ctl -c auto_exposure=3,exposure_time_absolute=251,auto_exposure=1
v4l2-ctl -C auto_exposure,exposure_time_absolute
auto_exposure: 1
exposure_time_absolute: 251

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Check controls flags before accessing them

[ Upstream commit ee929d5a10ca433a1c21b9aaeb70a67c5507c101 ]

We can figure out if reading/writing a set of controls can fail without
accessing them by checking their flags.

This way we can honor the API closer:

If an error is found when validating the list of controls passed with
VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to
indicate to userspace that no actual hardware was touched.

Fixes v4l2-compliance:
Control ioctls (Input 0):
warn: v4l2-test-controls.cpp(765): g_ext_ctrls(0) invalid error_idx 0
fail: v4l2-test-controls.cpp(645): invalid error index write only control
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Use control names from framework

[ Upstream commit 70fa906d6fceb07a49198d2f31cadecc76787419 ]

The framework already contains a map of IDs to names, lets use it when
possible.

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Add support for V4L2_CTRL_TYPE_CTRL_CLASS

[ Upstream commit 9b31ea808a4468d5d606d1f82c58b7e7bfb99f66 ]

Create all the class controls for the device defined controls.

Fixes v4l2-compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(216): missing control class for class 00980000
fail: v4l2-test-controls.cpp(216): missing control tclass for class 009a0000
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: FAIL

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: refactor __uvc_ctrl_add_mapping

[ Upstream commit 866c6bdd5663d4df7cf384b381b6ef8ba9ffd0e4 ]

Pass the chain instead of the device. We want to keep the reference to
the chain that controls belong to.

We need to delay the initialization of the controls after the chains
have been initialized.

This is a cleanup needed for the next patches.

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Remove s_ctrl and g_ctrl

[ Upstream commit 0c6bcbdfefa83b8a1e9659b3c127758dce0fe7ac ]

If we do not implement these callbacks the framework will call the
ext_ctrl callbaks instead, which are a superset of this functions.

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Do not check for V4L2_CTRL_WHICH_DEF_VAL

[ Upstream commit a2f8a484fbc96b8209a760cb3f2c95ca49c2cdb1 ]

The framework already checks for us if V4L2_CTRL_WHICH_DEF_VAL is
written.

Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stable-dep-of: 9f582f0418ed ("media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha/boot/tools/objstrip: fix the check for ELF header

[ Upstream commit 1878787797cbb019eeefe6f905514dcd557302b6 ]

Just memcmp() with ELFMAG - that's the normal way to do it in userland
code, which that thing is. Besides, that has the benefit of actually
building - str_has_prefix() is *NOT* present in <string.h>.

Fixes: 5f14596e55de "alpha: Replace strncmp with str_has_prefix"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kobject: Fix slab-out-of-bounds in fill_kobj_path()

[ Upstream commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 ]

In kobject_get_path(), if kobj->name is changed between calls
get_kobj_path_length() and fill_kobj_path() and the length becomes
longer, then fill_kobj_path() will have an out-of-bounds bug.

The actual current problem occurs when the ixgbe probe.

In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name
length becomes longer, out-of-bounds will occur.

cpu0                                         cpu1
ixgbe_probe
register_netdev(netdev)
  netdev_register_kobject
   device_add
    kobject_uevent // Sending ADD events
                                             systemd-udevd // rename netdev
                                              dev_change_name
                                               device_rename
                                                kobject_rename
ixgbe_mii_bus_init                             |
  mdiobus_register                              |
   __mdiobus_register                           |
    device_register                             |
     device_add                                 |
      kobject_uevent                            |
       kobject_get_path                         |
        len = get_kobj_path_length // old name  |
        path = kzalloc(len, gfp_mask);          |
                                                kobj->name = name;
                                                /* name length becomes
                                                 * longer
                                                 */
        fill_kobj_path /* kobj path length is
                        * longer than path,
                        * resulting in out of
                        * bounds when filling path
                        */

This is the kasan report:

==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0
Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673

Workqueue: events work_for_cpu_fn
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_address_description.constprop.0+0x86/0x1e7
print_report+0x36/0x4f
kasan_report+0xad/0x130
kasan_check_range+0x35/0x1c0
memcpy+0x39/0x60
fill_kobj_path+0x50/0xc0
kobject_get_path+0x5a/0xc0
kobject_uevent_env+0x140/0x460
device_add+0x5c7/0x910
__mdiobus_register+0x14e/0x490
ixgbe_probe.cold+0x441/0x574 [ixgbe]
local_pci_probe+0x78/0xc0
work_for_cpu_fn+0x26/0x40
process_one_work+0x3b6/0x6a0
worker_thread+0x368/0x520
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30

This reproducer triggers that bug:

while:
do
    rmmod ixgbe
    sleep 0.5
    modprobe ixgbe
    sleep 0.5

When calling fill_kobj_path() to fill path, if the name length of
kobj becomes longer, return failure and retry. This fixes the problem.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kobject: modify kobject_get_path() to take a const *

[ Upstream commit 33a0a1e3b3d17445832177981dc7a1c6a5b009f8 ]

kobject_get_path() does not modify the kobject passed to it, so make the
pointer constant.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221001165315.2690141-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 3bb2a01caa81 ("kobject: Fix slab-out-of-bounds in fill_kobj_path()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fix potential null-ptr-deref in device_add()

[ Upstream commit f6837f34a34973ef6600c08195ed300e24e97317 ]

I got the following null-ptr-deref report while doing fault injection test:

BUG: kernel NULL pointer dereference, address: 0000000000000058
CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G    B   W        N 6.1.0-rc3+
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x196/0x210
bus_remove_device+0x1bd/0x240
device_add+0xd3d/0x1100
w1_add_master_device+0x476/0x490 [wire]
ds2482_probe+0x303/0x3e0 [ds2482]

This is how it happened:

w1_alloc_dev()
  // The dev->driver is set to w1_master_driver.
  memcpy(&dev->dev, device, sizeof(struct device));
  device_add()
    bus_add_device()
    dpm_sysfs_add() // It fails, calls bus_remove_device.

    // error path
    bus_remove_device()
      // The dev->driver is not null, but driver is not bound.
      __device_release_driver()
        klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref.

    // normal path
    bus_probe_device() // It's not called yet.
      device_bind_driver()

If dev->driver is set, in the error path after calling bus_add_device()
in device_add(), bus_remove_device() is called, then the device will be
detached from driver. But device_bind_driver() is not called yet, so it
causes null-ptr-deref while access the 'knode_driver'. To fix this, set
dev->driver to null in the error path before calling bus_remove_device().

Fixes: 57eee3d23e88 ("Driver core: Call device_pm_add() after bus_add_device() in device_add()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205034904.2077765-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: cadence: Don't overflow the command FIFOs

[ Upstream commit 7cbfee2e2e40d2be54196362a845a3ea0a3f877d ]

The command FIFOs in the Cadence IP can be configured during design
up to 32 entries, and the code in cadence_master.c was assuming the
full 32-entry FIFO. But all current Intel implementations use an 8-entry
FIFO.

Up to now the longest message used was 6 entries so this wasn't
causing any problem. But future Cirrus Logic codecs have downloadable
firmware or tuning blobs. It is more efficient for the codec driver to
issue long transfers that can take advantage of any queuing in the
Soundwire controller and avoid the overhead of repeatedly writing the
page registers.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 2f52a5177caa ("soundwire: cdns: Add cadence library")
Link: https://lore.kernel.org/r/20221202161812.4186897-2-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: designware: fix i2c_dw_clk_rate() return size to be u32

[ Upstream commit f2e1fa99550dd7a882229e2c2cd9ecab4ce773d0 ]

Make i2c_dw_clk_rate() to return u32 instead of unsigned long, as the
function return the value of get_clk_rate_khz() which returns u32.

Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe()

[ Upstream commit a8d3392e0e5cfeb03f0cea1f2bc3f5f183c1deb4 ]

When request_irq(ires1->start) failed in w5300_hw_probe(), irq
ires->start has not been freed, and on the clean_up3 error path,
we also need to free ires1->start irq, fix it.

In addition, We should add free_irq in fusb300_remove(), and give
the lables a proper name so that they can be understood easily,
so add free_irq in fusb300_remove(), and update clean_up3 to
err_alloc_request.

Fixes: 0fe6f1d1f612 ("usb: udc: add Faraday fusb300 driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123014121.1989721-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: light: tsl2563: Do not hardcode interrupt trigger type

[ Upstream commit 027641b52fe37b64af61025298ce160c8b9b7a73 ]

Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_RAISING,
let's respect the settings specified in the firmware description.
To be compatible with the older firmware descriptions, if trigger
type is not set up there, we'll set it to default (raising edge).

Fixes: 388be4883952 ("staging:iio: tsl2563 abi fixes and interrupt handling")
Fixes: bdab1001738f ("staging:iio:light:tsl2563 remove old style event registration.")
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221207190348.9347-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: HISI_DMA should depend on ARCH_HISI

[ Upstream commit dcca9d045c0852584ad092123c7f6e6526a633b1 ]

The HiSilicon DMA Engine is only present on HiSilicon SoCs. Hence add a
dependency on ARCH_HISI, to prevent asking the user about this driver
when configuring a kernel without HiSilicon SoC support.

Fixes: e9f08b65250d73ab ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/363a1816d36cd3cf604d88ec90f97c75f604de64.1669044190.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0

[ Upstream commit 9735bde36487da43d3c3fc910df49639f72decbf ]

On DSA/IAX 1.0, TC-A and TC-B in GRPCFG are set as 1 to have best
performance and cannot be changed through sysfs knobs unless override
option is given.

The same values should be set on DSA 2.0 as well.

Fixes: ea7c8f598c32 ("dmaengine: idxd: restore traffic class defaults after wq reset")
Fixes: ade8a86b512c ("dmaengine: idxd: Set defaults for GRPCFG traffic class")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221209172141.562648-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()

[ Upstream commit 8b450dcff23aa254844492831a8e2b508a9d522d ]

`req` is allocated in pcf50633_adc_async_read(), but
adc_enqueue_request() could fail to insert the `req` into queue.
We need to check the return value and free it in the case of failure.

Fixes: 08c3e06a5eb2 ("mfd: PCF50633 adc driver")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221208061555.8776-1-linqiheng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: cs5535: Don't build on UML

[ Upstream commit 5ec32a3e4053c1a726b45381d56aa9e39eaf3911 ]

The cs5535-mfd driver uses CPU-specific data that is not available
for ARCH=um builds, so don't allow it to be built for UML.

Prevents these build errors:

In file included from ../arch/x86/include/asm/olpc.h:7,
                 from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
   16 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
   16 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   17 |                 (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   18 |                 (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
   23 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
   23 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   24 |                 (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   25 |                 (boot_cpu_data.x86_model == 10));

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: add UACCESS exceptions for __tsan_volatile_read/write

[ Upstream commit d5d469247264e56960705dc5ae7e1d014861fe40 ]

A lot of the tsan helpers are already excempt from the UACCESS warnings,
but some more functions were added that need the same thing:

kernel/kcsan/core.o: warning: objtool: __tsan_volatile_read16+0x0: call to __tsan_unaligned_read16() with UACCESS enabled
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_write16+0x0: call to __tsan_unaligned_write16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_read16+0x4: call to __tsan_unaligned_read16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_write16+0x4: call to __tsan_unaligned_write16() with UACCESS enabled

As Marco points out, these functions don't even call each other
explicitly but instead gcc (but not clang) notices the functions
being identical and turns one symbol into a direct branch to the
other.

Link: https://lkml.kernel.org/r/20230215130058.3836177-4-arnd@kernel.org
Fixes: 75d75b7a4d54 ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printf: fix errname.c list

[ Upstream commit 0c2baf6509af1d11310ae4c1c839481a6e9a4bc4 ]

On most architectures, gcc -Wextra warns about the list of error
numbers containing both EDEADLK and EDEADLOCK:

lib/errname.c:15:67: warning: initialized field overwritten [-Woverride-init]
   15 | #define E(err) [err + BUILD_BUG_ON_ZERO(err <= 0 || err > 300)] = "-" #err
      |                                                                   ^~~
lib/errname.c:172:2: note: in expansion of macro 'E'
  172 |  E(EDEADLK), /* EDEADLOCK */
      |  ^

On parisc, a similar error happens with -ECANCELLED, which is an
alias for ECANCELED.

Make the EDEADLK printing conditional on the number being distinct
from EDEADLOCK, and remove the -ECANCELLED bit completely as it
can never be hit.

To ensure these are correct, add static_assert lines that verify
all the remaining aliases are in fact identical to the canonical
name.

Fixes: 57f5677e535b ("printf: add support for printing symbolic error names")
Cc: Petr Mladek <pmladek@suse.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/all/20210514213456.745039-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927123409.1109737-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230206194126.380350-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Fix bash specific "==" operator

[ Upstream commit 1e6b485c922fbedf41d5a9f4e6449c5aeb923a32 ]

Since commit a1d6cd88c897 ("selftests/ftrace: event_triggers: wait
longer for test_event_enable") introduced bash specific "=="
comparation operator, that test will fail when we run it on a
posix-shell. `checkbashisms` warned it as below.

possible bashism in ftrace/func_event_triggers.tc line 45 (should be 'b = a'):
if [ "$e" == $val ]; then

This replaces it with "=".

Fixes: a1d6cd88c897 ("selftests/ftrace: event_triggers: wait longer for test_event_enable")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc: allow PM configs for sparc32 COMPILE_TEST

[ Upstream commit 7be6a87c2473957090995b7eb541e31d57a2c801 ]

When doing randconfig builds for sparc32 with COMPILE_TEST, some
(non-Sparc) drivers cause kconfig warnings with the Kconfig symbols PM,
PM_GENERIC_DOMAINS, or PM_GENERIC_DOMAINS_OF.

This is due to arch/sparc/Kconfig not using the PM Kconfig for
Sparc32:

  if SPARC64
  source "kernel/power/Kconfig"
  endif

Arnd suggested adding "|| COMPILE_TEST" to the conditional,
instead of trying to track down every driver that selects
any of these PM symbols.

Fixes the following kconfig warnings:

WARNING: unmet direct dependencies detected for PM
  Depends on [n]: SPARC64 [=n]
  Selected by [y]:
  - SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])

WARNING: unmet direct dependencies detected for PM
  Depends on [n]: SPARC64 [=n]
  Selected by [y]:
  - SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])

WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
  Depends on [n]: SPARC64 [=n] && PM [=y]
  Selected by [y]:
  - QCOM_GDSC [=y] && COMMON_CLK [=y] && PM [=y]
  - SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])
  - MESON_GX_PM_DOMAINS [=y] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
  - BCM2835_POWER [=y] && (ARCH_BCM2835 || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
  - BCM_PMB [=y] && (ARCH_BCMBCA || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
  - ROCKCHIP_PM_DOMAINS [=y] && (ARCH_ROCKCHIP || COMPILE_TEST [=y]) && PM [=y]
  Selected by [m]:
  - ARM_SCPI_POWER_DOMAIN [=m] && (ARM_SCPI_PROTOCOL [=m] || COMPILE_TEST [=y] && OF [=y]) && PM [=y]
  - MESON_EE_PM_DOMAINS [=m] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
  - QCOM_AOSS_QMP [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && MAILBOX [=y] && COMMON_CLK [=y] && PM [=y]

WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS_OF
  Depends on [n]: SPARC64 [=n] && PM_GENERIC_DOMAINS [=y] && OF [=y]
  Selected by [y]:
  - MESON_GX_PM_DOMAINS [=y] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]
  Selected by [m]:
  - MESON_EE_PM_DOMAINS [=m] && (ARCH_MESON || COMPILE_TEST [=y]) && PM [=y] && OF [=y]

Link: https://lkml.kernel.org/r/20230205004357.29459-1-rdunlap@infradead.org
Fixes: bdde6b3c8ba4 ("sparc64: Hibernation support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix auto-complete on aarch64

[ Upstream commit ffd1240e8f0814262ceb957dbe961f6e0aef1e7a ]

On aarch64 CPU related events are not under event_source/devices/cpu/events,
they're under event_source/devices/armv8_pmuv3_0/events on my machine.
Using current auto-complete script will generate below error:

[root@localhost bin]# perf stat -e
ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory

Fix this by not testing /sys/bus/event_source/devices/cpu/events on
aarch64 machine.

Fixes: 74cd5815d9af6e6c ("perf tool: Improve bash command line auto-complete for multiple events with comma")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Cc: prime.zeng@hisilicon.com
Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Do not try to queue auxtrace data on pipe

[ Upstream commit aeb802f872a7c42e4381f36041e77d1745908255 ]

When it processes AUXTRACE_INFO, it calls to auxtrace_queue_data() to
collect AUXTRACE data first.  That won't work with pipe since it needs
lseek() to read the scattered aux data.

  $ perf record -o- -e intel_pt// true | perf report -i- --itrace=i100
  # To display the perf.data header info, please use --header/--header-only options.
  #
  0x4118 [0xa0]: failed to process type: 70
  Error:
  failed to process sample

For the pipe mode, it can handle the aux data as it gets.  But there's
no guarantee it can get the aux data in time.  So the following warning
will be shown at the beginning:

  WARNING: Intel PT with pipe mode is not recommended.
           The output cannot relied upon.  In particular,
           time stamps and the order of events may be incorrect.

Fixes: dbd134322e74f19d ("perf intel-pt: Add support for decoding AUX area samples")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Add support for emulated ptwrite

[ Upstream commit d7015e50a9ed180dcc3947635bb2b5711c37f48b ]

ptwrite is an Intel x86 instruction that writes arbitrary values into an
Intel PT trace. It is not supported on all hardware, so provide an
alternative that makes use of TNT packets to convey the payload data.
TNT packets encode Taken/Not-taken conditional branch information, so
taking branches based on the payload value will encode the value into
the TNT packet. Refer to the changes to the documentation file
perf-intel-pt.txt in this patch for an example.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220509152400.376613-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aeb802f872a7 ("perf intel-pt: Do not try to queue auxtrace data on pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Add link to the perf wiki's Intel PT page

[ Upstream commit 9e5e641045ff09ded4eb52828c4c7e110635422a ]

Add an EXAMPLE section and link to the perf wiki's Intel PT page.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20220426133213.248475-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aeb802f872a7 ("perf intel-pt: Do not try to queue auxtrace data on pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Add documentation for Event Trace and TNT disable

[ Upstream commit 24e3599c5a88e0e2995e3f5c9305f80195942dc9 ]

Add documentation for Event Trace and TNT disable to the perf Intel PT man
page.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-26-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aeb802f872a7 ("perf intel-pt: Do not try to queue auxtrace data on pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf inject: Use perf_data__read() for auxtrace

[ Upstream commit 1746212daeba95e9ae1639227dc0c3591d41deeb ]

In copy_bytes(), it reads the data from the (input) fd and writes it to
the output file.  But it does with the read(2) unconditionally which
caused a problem of mixing buffered vs unbuffered I/O together.

You can see the problem when using pipes.

  $ perf record -e intel_pt// -o- true | perf inject -b > /dev/null
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  0x45c0 [0x30]: failed to process type: 71

It should use perf_data__read() to honor the 'use_stdio' setting.

Fixes: 601366678c93618f ("perf data: Allow to use stdio functions for pipe mode")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: led-core: Fix refcount leak in of_led_get()

[ Upstream commit da1afe8e6099980fe1e2fd7436dca284af9d3f29 ]

class_find_device_by_of_node() calls class_find_device(), it will take
the reference, use the put_device() to drop the reference when not need
anymore.

Fixes: 699a8c7c4bd3 ("leds: Add of_led_get() and led_put()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221220121807.1543790-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf llvm: Fix inadvertent file creation

[ Upstream commit 9f19aab47ced012eddef1e2bc96007efc7713b61 ]

The LLVM template is first echo-ed into command_out and then
command_out executed. The echo surrounds the template with double
quotes, however, the template itself may contain quotes. This is
generally innocuous but in tools/perf/tests/bpf-script-test-prologue.c
we see:
...
SEC("func=null_lseek file->f_mode offset orig")
...
where the first double quote ends the double quote of the echo, then
the > redirects output into a file called f_mode.

To avoid this inadvertent behavior substitute redirects and similar
characters to be ASCII control codes, then substitute the output in
the echo back again.

Fixes: 5eab5a7ee032acaa ("perf llvm: Display eBPF compiling command in debug output")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: llvm@lists.linux.dev
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230105082609.344538-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: jdata writepage fix

[ Upstream commit cbb60951ce18c9b6e91d2eb97deb41d8ff616622 ]

The ->writepage() and ->writepages() operations are supposed to write
entire pages. However, on filesystems with a block size smaller than
PAGE_SIZE, __gfs2_jdata_writepage() only adds the first block to the
current transaction instead of adding the entire page. Fix that.

Fixes: 18ec7d5c3f43 ("[GFS2] Make journaled data files identical to normal files on disk")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix warning and UAF when destroy the MR list

[ Upstream commit 3e161c2791f8e661eed24a2c624087084d910215 ]

If the MR allocate failed, the MR recovery work not initialized
and list not cleared. Then will be warning and UAF when release
the MR:

  WARNING: CPU: 4 PID: 824 at kernel/workqueue.c:3066 __flush_work.isra.0+0xf7/0x110
  CPU: 4 PID: 824 Comm: mount.cifs Not tainted 6.1.0-rc5+ #82
  RIP: 0010:__flush_work.isra.0+0xf7/0x110
  Call Trace:
   <TASK>
   __cancel_work_timer+0x2ba/0x2e0
   smbd_destroy+0x4e1/0x990
   _smbd_get_connection+0x1cbd/0x2110
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

  BUG: KASAN: use-after-free in smbd_destroy+0x4fc/0x990
  Read of size 8 at addr ffff88810b156a08 by task mount.cifs/824
  CPU: 4 PID: 824 Comm: mount.cifs Tainted: G        W          6.1.0-rc5+ #82
  Call Trace:
   dump_stack_lvl+0x34/0x44
   print_report+0x171/0x472
   kasan_report+0xad/0x130
   smbd_destroy+0x4fc/0x990
   _smbd_get_connection+0x1cbd/0x2110
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

  Allocated by task 824:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   __kasan_kmalloc+0x7a/0x90
   _smbd_get_connection+0x1b6f/0x2110
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

  Freed by task 824:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   kasan_save_free_info+0x2a/0x40
   ____kasan_slab_free+0x143/0x1b0
   __kmem_cache_free+0xc8/0x330
   _smbd_get_connection+0x1c6a/0x2110
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

Let's initialize the MR recovery work before MR allocate to prevent
the warning, remove the MRs from the list to prevent the UAF.

Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix lost destroy smbd connection when MR allocate failed

[ Upstream commit e9d3401d95d62a9531082cd2453ed42f2740e3fd ]

If the MR allocate failed, the smb direct connection info is NULL,
then smbd_destroy() will directly return, then the connection info
will be leaked.

Let's set the smb direct connection info to the server before call
smbd_destroy().

Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: fix race to check ls_layouts

[ Upstream commit fb610c4dbc996415d57d7090957ecddd4fd64fb6 ]

Its possible for __break_lease to find the layout's lease before we've
added the layout to the owner's ls_layouts list. In that case, setting
ls_recalled = true without actually recalling the layout will cause the
server to never send a recall callback.

Move the check for ls_layouts before setting ls_recalled.

Fixes: c5c707f96fc9 ("nfsd: implement pNFS layout recalls")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()

[ Upstream commit ddddedaa0db99481c5e5abe628ad54f65e8765bc ]

Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.

Discovered while auditing locking to write the Rust abstractions.

Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net
(cherry picked from commit aa8c85affe3facd3842c8912186623415931cc72)
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hid: bigben_probe(): validate report count

[ Upstream commit b94335f899542a0da5fafc38af8edcaf90195843 ]

bigben_probe() does not validate that the output report has the
needed report values in the first field.
A malicious device registering a report with one field and a single
value causes an head OOB write in bigben_worker() when
accessing report_field->value[1] to report_field->value[7].
Use hid_validate_values() which takes care of all the needed checks.

Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230211-bigben-oob-v1-1-d2849688594c@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: bigben: use spinlock to safely schedule workers

[ Upstream commit 76ca8da989c7d97a7f76c75d475fe95a584439d7 ]

Use spinlocks to deal with workers introducing a wrapper
bigben_schedule_work(), and several spinlock checks.
Otherwise, bigben_set_led() may schedule bigben->worker after the
structure has been freed, causing a use-after-free.

Fixes: 4eb1b01de5b9 ("HID: hid-bigbenff: fix race condition for scheduled work during removal")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-3-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: bigben_worker() remove unneeded check on report_field

[ Upstream commit 27d2a2fd844ec7da70d19fabb482304fd1e0595b ]

bigben_worker() checks report_field to be non-NULL.
The check has been added in commit
918aa1ef104d ("HID: bigbenff: prevent null pointer dereference")
to prevent a NULL pointer crash.
However, the true root cause was a missing check for output
reports, patched in commit
c7bf714f8755 ("HID: check empty report_list in bigben_probe()"),
where the type-confused report list_entry was overlapping with
a NULL pointer, which was then causing the crash.

Fixes: 918aa1ef104d ("HID: bigbenff: prevent null pointer dereference")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-2-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: bigben: use spinlock to protect concurrent accesses

[ Upstream commit 9fefb6201c4f8dd9f58c581b2a66e5cde2895ea2 ]

bigben driver has a worker that may access data concurrently.
Proct the accesses using a spinlock.

Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-1-7860c5763c38@diag.uniroma1.it
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared

[ Upstream commit fdff966bfde7cf0c85562d2bfb1ff1ba83da5f7b ]

Add struct snd_pcm_substream forward declaration

Fixes: 078a85f2806f ("ASoC: dapm: Only power up active channels from a DAI")
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230215132851.1626881-1-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()

[ Upstream commit e6a0b671880207566e1ece983bf989dde60bc1d7 ]

wait_for_completion_timeout() never returns a <0 value. It returns either
on timeout or a positive value (at least 1, or number of jiffies left
till timeout)

So, fix the error handling path and return -ETIMEDOUT should a timeout
occur.

Fixes: b0823ee35cf9 ("spi: Add spi driver for Socionext SynQuacer platform")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/c2040bf3cfa201fd8890cfab14fa5a701ffeca14.1676466072.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: fix disabling of swap

[ Upstream commit 5bab56fff53ce161ed859d9559a10361d4f79578 ]

When swap is activated to a file on an NFSv4 mount we arrange that the
state manager thread is always present as starting a new thread requires
memory allocations that might block waiting for swap.

Unfortunately the code for allowing the state manager thread to exit when
swap is disabled was not tested properly and does not work.
This can be seen by examining /proc/fs/nfsfs/servers after disabling swap
and unmounting the filesystem.  The servers file will still list one
entry.  Also a "ps" listing will show the state manager thread is still
present.

There are two problems.
1/ rpc_clnt_swap_deactivate() doesn't walk up the ->cl_parent list to
    find the primary client on which the state manager runs.

2/ The thread is not woken up properly and it immediately goes back to
    sleep without checking whether it is really needed.  Using
    nfs4_schedule_state_manager() ensures a proper wake-up.

Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 4dc73c679114 ("NFSv4: keep state manager thread active if swap is enabled")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs4trace: fix state manager flag printing

[ Upstream commit b46d80bd2d6e7e063c625a20de54248afe8d4889 ]

__print_flags wants a mask, not the enum value. Add two more flags.

Fixes: 511ba52e4c01 ("NFS4: Trace state recovery operation")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: keep state manager thread active if swap is enabled

[ Upstream commit 4dc73c679114a2f408567e2e44770ed934190db2 ]

If we are swapping over NFSv4, we may not be able to allocate memory to
start the state-manager thread at the time when we need it.
So keep it always running when swap is enabled, and just signal it to
start.

This requires updating and testing the cl_swapper count on the root
rpc_clnt after following all ->cl_parent links.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: b46d80bd2d6e ("nfs4trace: fix state manager flag printing")
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm: remove flush_scheduled_work() during local_exit()

[ Upstream commit 0b22ff5360f5c4e11050b89206370fdf7dc0a226 ]

Commit acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred
device removal") switched from using system workqueue to a single
workqueue local to DM. But it didn't eliminate the call to
flush_scheduled_work() that was introduced purely for the benefit of
deferred device removal with commit 2c140a246dc ("dm: allow remove to
be deferred").

Since DM core uses its own workqueue (and queue_work) there is no need
to call flush_scheduled_work() from local_exit(). local_exit()'s
destroy_workqueue(deferred_remove_workqueue) handles flushing work
started with queue_work().

Fixes: acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred device removal")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tlv320adcx140: fix 'ti,gpio-config' DT property init

[ Upstream commit 771725efe5e2e5396dd9d1220437e5f9d6b9ca9d ]

When the 'ti,gpio-config' property is not defined, the
device_property_count_u32() will return an error, rather than zero.

The current check, only handles a return value of zero, which assumes that
the property is defined and has nothing defined.

This change extends the check to also check for an error case (most likely
to be hit by the case that the 'ti,gpio-config' is not defined).

In case that the 'ti,gpio-config' and the returned 'gpio_count' is not
correct, there is a 'if (gpio_count != ADCX140_NUM_GPIO_CFGS)' check, a few
lines lower that will return -EINVAL.
This means that someone tried to define 'ti,gpio-config', but with the
wrong number of GPIOs.

Fixes: d5214321498a ("ASoC: tlv320adcx140: Add support for configuring GPIO pin")
Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230213073805.14640-1-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (mlxreg-fan) Return zero speed for broken fan

[ Upstream commit a1ffd3c46267ee5c807acd780e15df9bb692223f ]

Currently for broken fan driver returns value calculated based on error
code (0xFF) in related fan speed register.
Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with
misleading value.

Add check for fan fault prior return speed value and return zero if
fault is detected.

Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm63xx-hsspi: Fix multi-bit mode setting

[ Upstream commit 811ff802aaf878ebbbaeac0307a0164fa21e7d40 ]

Currently the driver always sets the controller to dual data bit mode
for both tx and rx data in the profile mode control register even for
single data bit transfer. Luckily the opcode is set correctly according
to SPI transfer data bit width so it does not actually cause issues.

This change fixes the problem by setting tx and rx data bit mode field
correctly according to the actual SPI transfer tx and rx data bit width.

Fixes: 142168eba9dc ("spi: bcm63xx-hsspi: add bcm63xx HSSPI driver")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230209200246.141520-11-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: lpass: fix incorrect mclk rate

[ Upstream commit e7621434378c40b62ef858c14ae6415fb6469a8e ]

For some reason we ended up with incorrect mclk rate which should be
1920000 instead of 96000, So far we were getting lucky as the same clk
is set to 192000 by wsa and va macro. This issue is discovered when there
is no wsa macro active and only rx or tx path is tested.
Fix this by setting correct rate.

Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: tx-macro: move to individual clks from bulk

[ Upstream commit 512864c4ffa70522b9c44d5b40c15273330ae9c7 ]

Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: e7621434378c ("ASoC: codecs: lpass: fix incorrect mclk rate")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: rx-macro: move to individual clks from bulk

[ Upstream commit 43b647d9940454263421f9a1c756680bdf1d443c ]

Using bulk clocks and referencing them individually using array index is
not great for readers.
So move them to individual clocks handling and also remove some unnecessary
error handling in the code.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: e7621434378c ("ASoC: codecs: lpass: fix incorrect mclk rate")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: tx-macro: move clk provider to managed variants

[ Upstream commit db8665a3e904f579840417f9414415c4dd54ac84 ]

move clk provider registration to managed api variants, this should help
with some code tidyup.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: e7621434378c ("ASoC: codecs: lpass: fix incorrect mclk rate")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: rx-macro: move clk provider to managed variants

[ Upstream commit 70a5e96bad592145ba25365689a2d7d8dedb3bd9 ]

move clk provider registration to managed api variants, this should help
with some code tidyup.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220224111718.6264-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: e7621434378c ("ASoC: codecs: lpass: fix incorrect mclk rate")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: Change bulk clock voting to optional voting in digital codecs

[ Upstream commit 9f589cf0f91485c8591775acad056c80378a2d34 ]

Change bulk clock frequency voting to optional bulk voting in va, rx and tx macros
to accommodate both ADSP and ADSP bypass based lpass architectures.

Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1635234188-7746-6-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: e7621434378c ("ASoC: codecs: lpass: fix incorrect mclk rate")
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: retain initial quirks set up when creating HID devices

[ Upstream commit 03a86105556e23650e4470c09f91cf7c360d5e28 ]

In certain circumstances, such as when creating I2C-connected HID
devices, we want to pass and retain some quirks (axis inversion, etc).
The source of such quirks may be device tree, or DMI data, or something
else not readily available to the HID core itself and therefore cannot
be reconstructed easily. To allow this, introduce "initial_quirks" field
in hid_device structure and use it when determining the final set of
quirks.

This fixes the problem with i2c-hid setting up device-tree sourced
quirks too late and losing them on device rebind, and also allows to
sever the tie between hid-code and i2c-hid when applying DMI-based
quirks.

Fixes: b60d3c803d76 ("HID: i2c-hid-of: Expose the touchscreen-inverted properties")
Fixes: a2f416bf062a ("HID: multitouch: Add quirks for flipped axes")
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Add quirks for flipped axes

[ Upstream commit a2f416bf062a38bb76cccd526d2d286b8e4db4d9 ]

Certain touchscreen devices, such as the ELAN9034, are oriented
incorrectly and report touches on opposite points on the X and Y axes.
For example, a 100x200 screen touched at (10,20) would report (90, 180)
and vice versa.

This is fixed by adding device quirks to transform the touch points
into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y.

Signed-off-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 03a86105556e ("HID: retain initial quirks set up when creating HID devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: aic94xx: Add missing check for dma_map_single()

[ Upstream commit 32fe45274edb5926abc0fac7263d9f889d02d9cf ]

Add check for dma_map_single() and return error if it fails in order to
avoid invalid DMA address.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Link: https://lore.kernel.org/r/20230128110832.6792-1-jiasheng@iscas.ac.cn
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix a memory leak

[ Upstream commit 54dd96015e8d7a2a07359e2dfebf05b529d1780c ]

Add a forgotten kfree().

Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission")
Link: https://lore.kernel.org/r/20230207152159.18627-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix enum odm_combine_mode mismatch

[ Upstream commit 087bad7eb1f6945f8232f132953ecc2bda8bd38d ]

A conversion from 'bool' to 'enum odm_combine_mode' was incomplete,
and gcc warns about this with many instances of

display/dc/dml/dcn20/display_mode_vba_20.c:3899:44: warning: implicit conversion from 'enum <anonymous>' to 'enum
odm_combine_mode' [-Wenum-conversion]
3899 | locals->ODMCombineEnablePerState[i][k] = false;

Change the ones that we get a warning for, using the same numerical
values to leave the behavior unchanged.

Fixes: 5fc11598166d ("drm/amd/display: expand dml structs")
Link: https://lore.kernel.org/all/20201026210039.3884312-3-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927100659.1431744-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ltc2945) Handle error case in ltc2945_value_store

[ Upstream commit 178b01eccfb0b8149682f61388400bd3d903dddc ]

ltc2945_val_to_reg errors were not being handled
which would have resulted in register being set to
0 (clamped) instead of being left alone.

Fixes: 6700ce035f83 ("hwmon: Driver for Linear Technologies LTC2945")
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: meson: fix gx-card codec node regex

[ Upstream commit 480b26226873c88e482575ceb0d0a38d76e1be57 ]

'codec' is a valid node name when there is a single codec
in the link. Fix the node regular expression to apply this.

Fixes: fd00366b8e41 ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230202183653.486216-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params()

[ Upstream commit 218674a45930c700486d27b765bf2f1b43f8cbf7 ]

Clang warns:

  ../sound/soc/atmel/mchp-spdifrx.c:455:3: error: variable 'mr' is uninitialized when used here [-Werror,-Wuninitialized]
                  mr |= SPDIFRX_MR_ENDIAN_BIG;
                  ^~
  ../sound/soc/atmel/mchp-spdifrx.c:432:8: note: initialize the variable 'mr' to silence this warning
          u32 mr;
                ^
                 = 0
  1 error generated.

Zero initialize mr so that these bitwise OR and assignment operation
works unconditionally.

Fixes: fa09fa60385a ("ASoC: mchp-spdifrx: fix controls which rely on rsr register")
Link: https://github.com/ClangBuiltLinux/linux/issues/1797
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230202-mchp-spdifrx-fix-uninit-mr-v1-1-629a045d7a2f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rsnd: fixup #endif position

[ Upstream commit 49123b51cd896e00b256a27c2ce9e6bfe1bbc22f ]

commit 1f9c82b5ab83ff2 ("ASoC: rsnd: add debugfs support") added
CONFIG_DEBUG_FS related definitions on rsnd.h, but it should be
added inside of RSND_H. This patch fixup it.

Fixes: 1f9c82b5ab83 ("ASoC: rsnd: add debugfs support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cx26t7r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove()

[ Upstream commit aaecdc32b7e35b4f9b457fb3509414aa9a932589 ]

CSC interrupts which might be used in controls are on bits 8 and 9 of
SPDIFRX_IDR register. Thus disable all the interrupts that are exported
by driver.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-5-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: fix controls that works with completion mechanism

[ Upstream commit d3681df44e856aab523a6eb7ba15b5e41efcbb1c ]

Channel status get and channel subcode get controls relies on data
returned by controls when certain IRQs are raised. To achieve that
completions are used b/w controls and interrupt service routine. The
concurrent accesses to these controls are protected by
struct snd_card::controls_rwsem.

Issues identified:
- reinit_completion() may be called while waiting for completion
  which should be avoided
- in case of multiple threads waiting, the complete() call in interrupt
  will signal only one waiting thread per interrupt which may lead to
  timeout for the others
- in case of channel status get as the CSC interrupt is not refcounted
  ISR may disable interrupt for threads that were just enabled it.

To solve these the access to controls were protected by a mutex. Along
with this there is no need for spinlock to protect the software cache
reads/updates b/w controls and ISR as the update is happening only when
requested from control, and only one reader can reach the control.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: fix return value in case completion times out

[ Upstream commit a4c4161d6eae3ef5f486d1638ef452d9bc1376b0 ]

wait_for_completion_interruptible_timeout() returns 0 in case of
timeout. Check this into account when returning from function.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mchp-spdifrx: fix controls which rely on rsr register

[ Upstream commit fa09fa60385abbf99342494b280da8b4aebbc0e9 ]

The SPDIFRX block is clocked by 2 clocks: peripheral and generic clocks.
Peripheral clock feeds user interface (registers) and generic clock feeds
the receiver.

To enable the receiver the generic clock needs to be enabled and also the
ENABLE bit of MCHP_SPDIFRX_MR register need to be set.

The signal control exported by mchp-spdifrx driver reports wrong status
when the receiver is disabled. This can happen when requesting the signal
and the capture was not previously started. To solve this the receiver
needs to be enabled (by enabling generic clock and setting ENABLE bit of
MR register) before reading the signal status.

As with this fix there are 2 paths now that need to control the generic
clock and ENABLE bit of SPDIFRX_MR register (one path though controls, one
path though configuration) a mutex has been introduced. We can't rely on
subsystem locking as the controls are protected by
struct snd_card::controls_rwsem semaphore and configuration is protected
by a different lock (embedded in snd_pcm_stream_lock_irq()).

The introduction of mutex is also extended to other controls which rely on
SPDIFRX_RSR.ULOCK bit as it has been discovered experimentally that having
both clocks enabled but not the receiver (through ENABLE bit of SPDIFRX.MR)
leads to inconsistent values of SPDIFRX_RSR.ULOCK. Thus on some controls we
rely on software state (dev->trigger_enabled protected by mutex) to
retrieve proper values.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw_bt1: fix MUX_MMIO dependencies

[ Upstream commit d4bde04318c0d33705e9a77d4c7df72f262011e0 ]

Selecting a symbol with additional dependencies requires
adding the same dependency here:

WARNING: unmet direct dependencies detected for MUX_MMIO
  Depends on [n]: MULTIPLEXER [=y] && OF [=n]
  Selected by [y]:
  - SPI_DW_BT1 [=y] && SPI [=y] && SPI_MASTER [=y] && SPI_DESIGNWARE [=y] && (MIPS_BAIKAL_T1 || COMPILE_TEST [=y])

Drop the 'select' here to avoid the problem. Anyone using
the dw-bt1 SPI driver should make sure they include the
mux driver as well now.

Fixes: 7218838109fe ("spi: dw-bt1: Fix undefined devm_mux_control_get symbol")
Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Link: https://lore.kernel.org/all/20221218192523.c6vnfo26ua6xqf26@mobilestation/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230130140156.3620863-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: vf610: connect GPIO label to dev name

[ Upstream commit 6f8ecb7f85f441eb7d78ba2a4df45ee8a821934e ]

Current GPIO label is fixed, so can't distinguish different GPIO
controllers through labels. Use dev name instead.

Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress()

[ Upstream commit ffe4c0f0bfaa571a676a0e946d4a6a0607f94294 ]

commit d3268a40d4b19f ("ASoC: soc-compress.c: fix NULL dereference")
enables DPCM capture, but it should independent from playback.
This patch fixup it.

Fixes: d3268a40d4b1 ("ASoC: soc-compress.c: fix NULL dereference")
Link: https://lore.kernel.org/r/87tu0i6j7j.wl-kuninori.morimoto.gx@renesas.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qnkvo1s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Clean dangling pointer on bind error path

[ Upstream commit 36aa8c61af55675ed967900fbe5deb32d776f051 ]

mtk_drm_bind() can fail, in which case drm_dev_put() is called,
destroying the drm_device object. However a pointer to it was still
being held in the private object, and that pointer would be passed along
to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that
point, resulting in a panic. Clean the pointer when destroying the
object in the error path to prevent this from happening.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221122143949.3493104-1-nfraprado@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc

[ Upstream commit 5bf1e3bd7da625ccf9a22c8cb7d65271e6e47f4c ]

As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.

Fixes: 31c5558dae05 ("drm/mediatek: Refactor plane init")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221205095115.2905090-1-ruanjinjie@huawei.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>