drm/i915: Clean up g4x+ sprite plane registers

Use REG_BIT() & co. to polish the g4x+ sprite plane registers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Clean up ivb+ sprite plane registers

Use REG_BIT() & co. to polish the ivb+ sprite plane registers.

v2: deal with gvt

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-9-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Use REG_BIT() & co. for universal plane bits

Polish the skl+ universal plane register defines by
using REG_BIT() & co.

The defines are also currently spread around in some
semi-random fashion. Collect them up into one place.

v2: deal with gvt

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Sipmplify PLANE_STRIDE masking

There's no need to have separate masks for the stride bitfield
in PLANE_STRIDE for different platforms. All the extra bits
are hardcoded to zero anyway.

Also the masks we're using now don't even match the actual hardware
since the bitfield was only 10 bits on skl/derivatives, only getting
bumped to 11 bits on glk.

So let's just use a 12 bit mask for everything.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/psr: remove unused lines_to_wait vbt info

The lines_to_wait info from VBT is never used. Remove.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112112715.1234366-1-jani.nikula@intel.com

drm/i915/pxp: Hold RPM wakelock during PXP unbind

Similar to commit b8d8436840ca ("drm/i915/gt: Hold RPM wakelock during
PXP suspend") but to fix the same warning for unbind during shutdown:

------------[ cut here ]------------
RPM wakelock ref not held during HW access
WARNING: CPU: 0 PID: 4139 at drivers/gpu/drm/i915/intel_runtime_pm.h:115
gen12_fwtable_write32+0x1b7/0
Modules linked in: 8021q ccm rfcomm cmac algif_hash algif_skcipher
af_alg uinput snd_hda_codec_hdmi vf industrialio iwl7000_mac80211
cros_ec_sensorhub lzo_rle lzo_compress zram iwlwifi cfg80211 joydev
CPU: 0 PID: 4139 Comm: halt Tainted: G     U  W
5.10.84 #13 344e11e079c4a03940d949e537eab645f6
RIP: 0010:gen12_fwtable_write32+0x1b7/0x200
Code: 48 c7 c7 fc b3 b5 89 31 c0 e8 2c f3 ad ff 0f 0b e9 04 ff ff ff c6
05 71 e9 1d 01 01 48 c7 c7 d67
RSP: 0018:ffffa09ec0bb3bb0 EFLAGS: 00010246
RAX: 12dde97bbd260300 RBX: 00000000000320f0 RCX: ffffffff89e60ea0
RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffffffff89e60e70
RBP: ffffa09ec0bb3bd8 R08: 0000000000000000 R09: ffffa09ec0bb3950
R10: 00000000ffffdfff R11: ffffffff89e91160 R12: 0000000000000000
R13: 0000000028121969 R14: ffff9515c32f0990 R15: 0000000040000000
FS:  0000790dcf225740(0000) GS:ffff951737800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000058b25efae147 CR3: 0000000133ea6001 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 intel_pxp_fini_hw+0x2f/0x39
 i915_pxp_tee_component_unbind+0x1c/0x42
 component_unbind+0x32/0x48
 component_unbind_all+0x80/0x9d
 take_down_master+0x24/0x36
 component_master_del+0x56/0x70
 mei_pxp_remove+0x2c/0x68
 mei_cl_device_remove+0x35/0x68
 device_release_driver_internal+0x100/0x1a1
 mei_cl_bus_remove_device+0x21/0x79
 mei_cl_bus_remove_devices+0x3b/0x51
 mei_stop+0x3b/0xae
 mei_me_shutdown+0x23/0x58
 device_shutdown+0x144/0x1d3
 kernel_power_off+0x13/0x4c
 __se_sys_reboot+0x1d4/0x1e9
 do_syscall_64+0x43/0x55
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x790dcf316273
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00
00 89 fa be 69 19 12 28 bf ad8
RSP: 002b:00007ffca0df9198 EFLAGS: 00000202 ORIG_RAX: 00000000000000a9
RAX: ffffffffffffffda RBX: 000000004321fedc RCX: 0000790dcf316273
RDX: 000000004321fedc RSI: 0000000028121969 RDI: 00000000fee1dead
RBP: 00007ffca0df9200 R08: 0000000000000007 R09: 0000563ce8cd8970
R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffca0df9308
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003
---[ end trace 2f501b01b348f114 ]---
ACPI: Preparing to enter system sleep state S5
reboot: Power down

Changes since v1:
 - Rebase to latest drm-tip

Fixes: 0cfab4cb3c4e ("drm/i915/pxp: Enable PXP power management")
Suggested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106200236.489656-2-juston.li@intel.com

drm/i915/display/adlp: Implement new step in the TC voltage swing prog sequence

TC voltage swing programming sequence was updated with a new step.

BSpec: 54956
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113174826.50272-1-jose.souza@intel.com

drm/i915/display/ehl: Update voltage swing table

EHL table was recently updated with some minor fixes.

BSpec: 21257
Cc: stable@vger.kernel.org
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113160437.49059-1-jose.souza@intel.com

drm/i915/pcode: rename sandybridge_pcode_* to snb_pcode_*

Prefer acronym-based naming to be in line with the rest of the driver.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112111740.1208374-1-jani.nikula@intel.com

drm/i915/dp: make intel_dp_pack_aux() static again

The last user of intel_dp_pack_aux() outside intel_dp_aux.c got removed
in commit ad26451a7902 ("drm/i915/display: Drop PSR support from HSW and
BDW"). Make the function static again.

Rename the pack/unpack functions to follow the usual naming conventions
while at it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112105703.1151391-1-jani.nikula@intel.com

Merge tag 'gvt-next-2022-01-12' of https://github.com/intel/gvt-linux into drm-intel-next

gvt-next-2022-01-12

- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f3076d7e-ff71-4882-8d72-fcc577a882cb@intel.com

drm/i915/gvt: Constify vgpu_types

It is never modified, so make it const to allow the compiler to put it
in read-only memory. While at it, make name a const char*.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-10-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify gtt_type_table_entry

It is never modified, so make it const to allow the compiler to put it
in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-9-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify formats

These are never modified, so make them const to allow the compiler to
put them in read-only memory. WHile at it, make the description const
char* since it is never modified.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-8-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify cmd_interrupt_events

It is never modified, so make it const to allow the compiler to put it
in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-7-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify gvt_mmio_block

These are never modified, so make them const to allow the compiler to
put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-6-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify intel_gvt_sched_policy_ops

These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-5-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify intel_gvt_irq_ops

These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-4-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify intel_gvt_gtt_pte_ops

These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-3-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Constify intel_gvt_gtt_gma_ops

These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211204105527.15741-2-rikard.falkeborn@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Fix cmd parser error for Passmark9

This is to add one new register required for windows guest driver
update when running Passmark9, otherwise cmd parser would complain
and fail guest workload.

Cc: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211011043329.3519093-1-zhenyuw@linux.intel.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Use list_entry to access list members

Use list_entry() instead of container_of() to access list members.
Also drop unnecessary and misleading NULL checks on the result of
list_entry().

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210523172304.3033229-1-linux@roeck-us.net
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915: Drop unused _PORT3 and _PORT4 TC phy register offsets

All MG/DKL PHY register regions are evenly spaced offset-wise (0x168000,
0x169000, 0x16A000, 0x16B000) so the _MMIO_PORT() macro we use to access
their registers only needs the first two offsets.  We can drop the
_PORT3 and _PORT4 offsets which are never directly referenced.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-12-matthew.d.roper@intel.com

drm/i915: Move TC PHY registers to their own header

Registers representing the MG/DKL TC PHYs (including the TC DPLLs which
exist inside the PHY) are only needed in a couple files and on specific
platforms; let's keep them separate from the general register pool.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-11-matthew.d.roper@intel.com

drm/i915: Move combo PHY registers to their own header

These registers are only needed in a couple files and on specific
platforms; let's keep them separate from the general register pool.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-10-matthew.d.roper@intel.com

drm/i915: Move SNPS PHY registers to their own header

These registers are only needed in a couple files and on specific
platforms; let's keep them separate from the general register pool.

v2:
 - Don't forget to include i915_reg_defs.h (Jani)
 - Ensure include guard matches header name (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-9-matthew.d.roper@intel.com

drm/i915/gt: Move engine registers to their own header

Let's continue breaking up and cleaning up the massive i915_reg.h file
by moving all registers that are defined in relation to an engine base
to their own header.

There are probably a bunch of other "engine registers" that we haven't
moved yet (especially those that belong to the render engine in the
0x2??? range), but this is a relatively straightforward first step.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-8-matthew.d.roper@intel.com

drm/i915: Introduce i915_reg_defs.h

We'd like to start splitting i915_reg.h into various domain-specific
register files and cleaning them up.  Let's move the basic macros and
type definitions to their own header file that can be including in each
of the new split headers.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-7-matthew.d.roper@intel.com

drm/i915: Replace GFX_MODE_GEN7 with RING_MODE_GEN7

It's preferable to use parameterized register macros where possible.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-6-matthew.d.roper@intel.com

drm/i915: Use RING_PSMI_CTL rather than per-engine macros

We have a parameterized macro for RING_PSMI_CTL; let's use that instead
of the per-engine definitions where possible.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-5-matthew.d.roper@intel.com

drm/i915: Parameterize ECOSKPD

Combine the separate render and blitter register definitions into a
single definition.  We already know we have some workarounds on an
upcoming platform that will need to update the ECOSKPD register for
other engines too, so this helps pave the way for that.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-4-matthew.d.roper@intel.com

drm/i915: Parameterize PWRCTX_MAXCNT

Rather than having separate definitions for each engine, create a single
parameterized macro that takes the engine base offset.  This will also
ensure we get to the proper offset if we ever need to use these
registers on newer platforms (where the media engine offsets have
changed).

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-3-matthew.d.roper@intel.com

drm/i915: Use parameterized GPR register definitions everywhere

Since we have an engine-parameterized macro GEN8_RING_CS_GPR, let's use
that in place of the HSW_CS_GPR and BCS_GPR register definitions.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-2-matthew.d.roper@intel.com

drm/i915/snps: vswing value refined for SNPS phys

Updated new values from BSPEC.

Bspec: 53920
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110234520.6836-1-clinton.a.taylor@intel.com

drm/i915: split out vlv sideband registers from i915_reg.h

Add a dedicated file vlv_sideband_reg.h for the VLV/CHV sideband
registers. The sideband registers macros are needed by the same files
that need vlv_sideband.h, so include the definitions from there.

v2: Fix copyright year (Matt)

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095740.166078-2-jani.nikula@intel.com

drm/i915: split out PCI config space registers from i915_reg.h

The PCI config space registers don't really belong next to the MMIO
register definitions.

v2: Fix copyright year (Matt)

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095740.166078-1-jani.nikula@intel.com

drm/i915: split out gem/i915_gem_tiling.h from i915_drv.h

We already have the gem/i915_gem_tiling.c file.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8073a429ed1f8ade9c0cc8a6ed1a0f82183100c5.1641561552.git.jani.nikula@intel.com

drm/i915: split out gem/i915_gem_userptr.h from i915_drv.h

We already have the gem/i915_gem_userptr.c file.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c29f66604ebd973b8eff1cce7d7c53615a26480f.1641561552.git.jani.nikula@intel.com

drm/i915: split out i915_gem_evict.h from i915_drv.h

We already have the i915_gem_evict.c file.

v2: Fixed commit message (Tvrtko)

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec666853171d04daeb21a93083940df36907c343.1641561552.git.jani.nikula@intel.com

drm/i915: split out i915_cmd_parser.h from i915_drv.h

We already have the i915_cmd_parser.c file.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a02b8788266f4f2fd4de12808b55c4a66179e98.1641561552.git.jani.nikula@intel.com

drm/i915: split out i915_getparam.h from i915_drv.h

We already have the i915_getparam.c file.

Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/27f3af2298c3cdd3cb2839c2a9a52237248e087a.1641561552.git.jani.nikula@intel.com

drm/i915: Fix possible NULL pointer dereferences in i9xx_update_wm()

Check return pointer from intel_crtc_for_plane() before dereferencing
it, as it can be NULL.

v2: Moved the NULL check into intel_crtc_active().

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217160255.1300348-1-harish.chegondi@intel.com

drm/i915: stop including i915_irq.h from i915_drv.h

Only include i915_irq.h where actually needed.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220105102131.988791-1-jani.nikula@intel.com

drm: Add orientation quirk for GPD Win Max

Panel is 800x1280, but mounted on a laptop form factor, sideways.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-3-anisse@astier.eu

drm/i915/opregion: add support for mailbox #5 EDID

The ACPI OpRegion Mailbox #5 ASLE extension may contain an EDID to be
used for the embedded display. Add support for using it via by adding
the EDID to the list of available modes on the connector, and use it for
eDP when available.

If a panel's EDID is broken, there may be an override EDID set in the
ACPI OpRegion mailbox #5. Use it if available.

Fixes the GPD Win Max display.

Based on original patch series by: Jani Nikula <jani.nikula@intel.com>
https://patchwork.kernel.org/project/intel-gfx/patch/20200828061941.17051-1-jani.nikula@intel.com/

Changes:
 - EDID is copied and validated with drm_edid_is_valid
 - EDID is now only used as a fallback.
 - squashed the two patches

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-2-anisse@astier.eu

drm/i915/dsi: Drop double check ACPI companion device for NULL

acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222154033.6770-1-andriy.shevchenko@linux.intel.com

drm/i915/fbc: Remember to update FBC state even when not reallocating CFB

We mustn't forget to update our FBC state even if we don't have
to reallocate the CFB. Otherwise we won't refresh our notion
of what eg. the new fence or the new override CFB stride
should be. Using the wrong CFB stride in particular can cause
underruns and could even corrupt other stuff in stolen.

Fixes: f4cfdbb02ca8 ("drm/i915/fbc: Nuke state_cache")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4774
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216110822.8461-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/bios: fix slab-out-of-bounds access

If VBT size is not a multiple of 4, the last 4-byte store will be out of
bounds of the allocated buffer. Spotted with KASAN. Round up the
allocation size.

v2: Use round_up() intead of roundup() as it's a power of 2 (Thomas)

Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: a36e7dc0af1c ("drm/i915/dg1: Read OPROM via SPI controller")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222081654.1843211-1-jani.nikula@intel.com

drm: Always include the debugfs dentry in drm_crtc

Remove the counterproductive CONFIG_DEBUG_FS ifdef and just include
the debugfs dentry in drm_crtc always. This way we don't need
annoying ifdefs in the actual code with DEBUGFS=n. Also we don't
have these ifdefs around any of the other debugfs dentries either
so can't see why drm_crtc should be special.

This fixes the i915 DEBUGFS=n build because I assumed the dentry
would always be there.

Cc: Jani Nikula <jani.nikula@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Fixes: e74c6aa955ca ("drm/i915/fbc: Register per-crtc debugfs files")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211221193754.12287-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

drm/i915/adl-n: Enable ADL-N platform

Adding PCI device ids and enabling ADL-N platform.
ADL-N from i915 point of view is subplatform of ADL-P.

BSpec: 68397

Changes since V2:
- Added version log history
Changes since V1:
- replace IS_ALDERLAKE_N with IS_ADLP_N - Jani Nikula

Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210051802.4063958-1-tejaskumarx.surendrakumar.upadhyay@intel.com

drm/i915/dg1: Read OPROM via SPI controller

Read OPROM SPI through MMIO and find VBT entry since we can't use
OpRegion and PCI mapping may not work on some systems due to most BIOSes
not leaving the Option ROM mapped.

v2: Remove message with allocation failure

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216062645.3477854-1-lucas.demarchi@intel.com

drm/i915: Remove unused intel_gmbus_set_speed() function

The intel_gmbus_set_speed() function is not used anywhere, remove it.

Note drivers/gpu/drm/gma500 has its own copy called
gma_intel_gmbus_set_speed() which is used, the intel_gmbus_set_speed()
version in the i915 code is not used at all

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211121191001.252076-1-hdegoede@redhat.com

drm/i915/backlight: Make ext_pwm_disable_backlight() call intel_backlight_set_pwm_level()

At least the Bay Trail LPSS PWM controller used with DSI panels on many
Bay Trail tablets seems to leave the PWM pin in whatever state it was
(high or low) ATM that the PWM gets disabled. Combined with some panels
not having a separate backlight-enable pin this leads to the backlight
sometimes staying on while it should not (when the pin was high during
PWM-disabling).

First calling intel_backlight_set_pwm_level() will ensure that the pin
is always low (or high for inverted brightness panels) since the passed
in duty-cycle is 0% (or 100%) when the PWM gets disabled fixing the
backlight sometimes staying on.

With the exception of ext_pwm_disable_backlight() all other
foo_disable_backlight() functions call intel_backlight_set_pwm_level()
already before disabling the backlight, so this change also aligns
ext_pwm_disable_backlight() with all the other disable() functions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211121110032.4720-2-hdegoede@redhat.com

drm/i915/fbc: Register per-crtc debugfs files

Expose FBC debugfs files for each crtc. These may or may not point
to the same FBC instance depending on the platform.

We leave the old global debugfs files in place until
igt catches up to the new per-crtc approach.

v2: Take a trip via intel_crtc_debugfs_add() (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213151435.9700-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/fbc: Introduce device info fbc_mask

Declare which FBC instances are present via a fbc_mask
in device info. For the moment there is just the one.

TODO: Need to figure out how to expose multiple FBC
instances in debugs. Just different file names, or move
the files under some subdirectory (per-crtc maybe), or
something else? This will need igt changes as well.

v2: Put the mask into device_info.display (Jani)
    Put the magic pipe->fbc thing into skl_fbc_id_for_pipe() (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-4-ville.syrjala@linux.intel.com

drm/i915/fbc: Loop through FBC instances in various places

Convert i915->fbc into an array in preparation for
multiple FBC instances, and loop through all instances
in all places where the caller does not know which
instance(s) (if any) are relevant. This is the case
for eg. frontbuffer tracking and FIFO underrun hadling.

v2: More intel_ namespace (Jani)
    Leave out debugfs for later

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-3-ville.syrjala@linux.intel.com

drm/i915/fbc: Parametrize FBC register offsets

Parametrize ilk+ FBC register offsets based on the FBC instance.

v2: More intel_ namespace (Jani)
v3: Don't break gvt (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214184616.1410-1-ville.syrjala@linux.intel.com

drm/i915/cdclk: move struct intel_cdclk_funcs to intel_cdclk.c

The funcs struct can be opaque, make it internal to intel_cdclk.c.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-2-jani.nikula@intel.com

drm/i915/cdclk: turn around i915_drv.h and intel_cdclk.h dependency

intel_cdclk.h only needs i915_drv.h for struct intel_cdclk_config. Move
the definition to intel_cdclk.h and turn the includes around to avoid
including i915_drv.h from other headers.

The intel cdclk state macros in intel_cdclk.h still reference struct
drm_i915_private, but as macros they don't strictly require the
definition until they are used.

v2: Expand on the commit message wrt cdclk state macros

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-1-jani.nikula@intel.com

drm/i915: Fix implicit use of struct pci_dev

intel_device_info.h references struct pci_dev but does not ensure that
the struct has been declared, causing build failures if something in
other headers changes so that the implicit dependency it is relying on
is no longer satisfied:

In file included from drivers/gpu/drm/i915/intel_device_info.h:32,
                 from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h:11,
                 from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:11:
drivers/gpu/drm/i915/display/intel_display.h:643:39: error: 'struct pci_dev' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
  643 | bool intel_modeset_probe_defer(struct pci_dev *pdev);
      |                                       ^~~~~~~
cc1: all warnings being treated as errors

Add a declaration of the struct to fix this.

Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94b541f53db1 ("drm/i915: Add intel_modeset_probe_defer() helper")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213170753.3680209-1-broonie@kernel.org

drm/i915: Move pipe/transcoder/abox masks under intel_device_info.display

Collect the dipslay related mask under the display sub-structure
in intel_device_info.

Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.

There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/cdclk: hide struct intel_cdclk_vals

The definition is not needed outside of intel_cdclk.c.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7e7e7fb91eae2b49a0ab5d982a235cec34e3320.1639068649.git.jani.nikula@intel.com

drm/i915/cdclk: move intel_atomic_check_cdclk() to intel_cdclk.c

Rename to intel_cdclk_atomic_check() and make
intel_cdclk_bw_calc_min_cdclk() static.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/43ad4d437121f43d76c790ac5d4d131743d58988.1639068649.git.jani.nikula@intel.com

drm/i915/pxp: remove useless includes

Not needed.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/01c4ea0cea17eead027c83dc9eaca3c181ce3a24.1639142167.git.jani.nikula@intel.com

drm/i915/pxp: un-inline intel_pxp_is_enabled()

In the interest of reducing include dependencies, un-inline
intel_pxp_is_enabled().

v2: Fix build for CONFIG_DRM_I915_PXP=n

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36bbb3708f3b1f84f0718afff94212dde93cb479.1639142167.git.jani.nikula@intel.com

drm/i915/fb: reduce include dependencies

We actually need i915_active_types.h, not i915_active.h.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aed5f1afda4448ec46c7ff1f95291edebf355790.1639142167.git.jani.nikula@intel.com

drm/i915/fbc: avoid intel_frontbuffer.h include with declaration

Reduce include dependencies using forward declarations.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb54050e03f830a1b29eb14cb37466f39c499cc2.1639142167.git.jani.nikula@intel.com

drm/i915/psr: avoid intel_frontbuffer.h include with declaration

Reduce include dependencies using forward declarations.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee35f2f01f731c21f24a238f2d1690b09ac2da1f.1639142167.git.jani.nikula@intel.com

drm/i915/active: remove useless i915_utils.h include

Not needed.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/52b1cf56c16bf669a1357ce81d9232c5480914a4.1639142167.git.jani.nikula@intel.com

drm/i915/reset: include intel_display.h instead of intel_display_types.h

Use the more specific include that's needed.

v2: Include intel_display.h (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1e195b8ca1252d1e149c8185d107a5517496973.1639142167.git.jani.nikula@intel.com

drm/i915/display: Fix an unsigned subtraction which can never be negative.

smatch warning:
drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn:
unsigned 'fw->size - offset' is never less than zero

Firmware size is size_t and offset is u32. So the subtraction is
unsigned which can never be less than zero.

Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210044129.12422-1-harshit.m.mogalapalli@oracle.com

drm/i915: Add privacy-screen support (v3)

Add support for eDP panels with a built-in privacy screen using the
new drm_privacy_screen class.

Changes in v3:
- Move drm_privacy_screen_get() call to intel_ddi_init_dp_connector()

Changes in v2:
- Call drm_connector_update_privacy_screen() from
  intel_enable_ddi_dp() / intel_ddi_update_pipe_dp() instead of adding a
  for_each_new_connector_in_state() loop to intel_atomic_commit_tail()
- Move the probe-deferral check to the intel_modeset_probe_defer() helper

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-11-hdegoede@redhat.com

drm/i915: Add intel_modeset_probe_defer() helper

The upcoming privacy-screen support adds another check for
deferring probe till some other drivers have bound first.

Factor out the current vga_switcheroo_client_probe_defer() check
into an intel_modeset_probe_defer() helper, so that further
probe-deferral checks can be added there.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-10-hdegoede@redhat.com

drm/i915: s/intel_get_first_crtc/intel_first_crtc/

Since we got rid of the "_get_" from intel_get_crtc_for_pipe()
let's do the same for intel_get_first_crtc() for consistency.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203112029.1057-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Relocate intel_crtc_for_plane()

Move intel_crtc_for_plane() next to its only user. No one
else should ever use this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203112029.1057-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Nuke {pipe,plane}_to_crtc_mapping[]

These plane/pipe->crtc mapping arrays are rather pointless.
Get rid of them and just iterate the lists instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203112029.1057-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-next

Get the dependencies for merging drm-privacy-screen support.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/trace: split out display trace to a separate file

Add display/intel_display_trace.[ch] for defining display
tracepoints. The main goal is to reduce cross-includes between gem and
display. It would be possible split up tracing even further, but that
would lead to more boilerplate.

We end up having to include intel_crtc.h in a few places because it was
pulled in implicitly via intel_de.h -> i915_trace.h -> intel_crtc.h, and
that's no longer the case.

There should be no changes to tracepoints.

v3:
- Rebase

v2:
- Define TRACE_INCLUDE_PATH relative to define_trace.h (Chris)
- Remove useless comments (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7862ad764fbd0748d903c76bc632d3d277874e5b.1638961423.git.jani.nikula@intel.com

drm/i915/trace: clean up boilerplate organization

Follow the style that seems to be prevalent in kernel for undef and
define of TRACE_SYSTEM, TRACE_INCLUDE_PATH, and TRACE_INCLUDE_FILE.

There should be no changes to tracepoints.

v2: Keep TRACE_INCLUDE_PATH relative to define_trace.h (Chris)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0d37790ee70fb60be6f6a73d8bde2013510a7ad8.1638961423.git.jani.nikula@intel.com

Merge tag 'drm-misc-next-2021-11-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.17:

UAPI Changes:

Cross-subsystem Changes:

 * Move 'nomodeset' kernel boot option into DRM subsystem

Core Changes:

 * Replace several DRM_*() logging macros with drm_*() equivalents
 * panel: Add quirk for Lenovo Yoga Book X91F/L
 * ttm: Documentation fixes

Driver Changes:

 * Cleanup nomodeset handling in drivers
 * Fixes
 * bridge/anx7625: Fix reading EDID; Fix error code
 * bridge/megachips: Probe both bridges before registering
 * vboxvideo: Fix ERR_PTR usage

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YaSVz15Q7dAlEevU@linux-uq9g.fritz.box

drm/i915/dmc: Update DMC to v2.14 on ADL-P

Changes since v2.12:
  - Release notes for v2.13:
      1. Fix for simple flip queue with DC6v
  - Release notes for v2.14:
      1. Fix for flip queue roll over cases with DC6v
      2. Enhancement for residency
      3. Workaround for 3Dlut restore issue

v2: Commit message update (Imre)

Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208213115.1919503-1-lucas.demarchi@intel.com

drm/i915: Skip remap_io_mapping() for non-x86 platforms

Only hw that supports mappable aperture would hit this path
vm_fault_gtt/vm_fault_tmm, So we never hit this function
remap_io_mapping() in discrete, So skip this code for non-x86
architectures.

v2: use IS_ENABLED () instead of #if defined

v3: move function prototypes from i915_drv.h to i915_mm.h

v4: added kernel error message in stub function

v5: fixed compilation warnings

v6: checkpatch style

Signed-off-by: Siva Mullati <siva.mullati@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208041215.763098-1-siva.mullati@intel.com

drm/i915/rpl-s: Enable guc submission by default

Though, RPL-S is defined as subplatform of ADL-S, unlike
ADL-S, it has GuC submission by default.

v2: Remove extra parenthesis (Jani)
v3: s/IS_RAPTORLAKE/IS_ADLS_RPLS (Jani)

Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203063545.2254380-4-anusha.srivatsa@intel.com

drm/i915/rpl-s: Add PCH Support for Raptor Lake S

Add the PCH ID for RPL-S.

v2: Self contained commit message (Jani)

Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203063545.2254380-3-anusha.srivatsa@intel.com

drm/i915/rpl-s: Add PCI IDS for Raptor Lake S

Raptor Lake S(RPL-S) is a version 12
Display, Media and Render. For all i915
purposes it is the same as Alder Lake S (ADL-S).

Introduce RPL-S as a subplatform
of ADL-S. This patch adds PCI ids for RPL-S.

BSpec: 53655
Cc: x86@kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # arch/x86
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203063545.2254380-2-anusha.srivatsa@intel.com

drm/i915: Allow cdclk squasher to be reconfigured live

Supposedly we should be able to change the cdclk squasher waveform
even when many pipes are active. Make it so.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-6-mika.kahola@intel.com

drm/i915/display/dg2: Read CD clock from squasher table

To calculate CD clock with squasher unit, we set CD clock ratio to fixed value of 34.
The CD clock value is read from CD clock squasher table.

BSpec: 54034

v2: Read ratio from register (Ville)
    Drop unnecessary local variable (Ville)
    Get CD clock from the given table
v3: Calculate CD clock frequency based on waveform bit pattern (Ville)
[v4: vsyrjala: Actually do a proper blind readout from the hardware]
[v5: vsyrjala: Use has_cdclk_squasher()]

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-5-mika.kahola@intel.com

drm/i915/display/dg2: Set CD clock squashing registers

Set CD clock squashing registers based on selected CD clock.

v2: use slk_cdclk_decimal() to compute decimal values instead of a
    specific table (Ville)
    Set waveform based on CD clock table (Ville)
    Drop unnecessary local variable (Ville)
v3: Correct function naming (Ville)
    Correct if-else structure (Ville)
[v4: vsyrjala: Fix spaces vs. tabs]
[v5: vsyrjala: Fix cd2x divider calculation (Uma),
               Add warn to waveform lookup (Uma),
               Handle bypass freq in waveform lookup,
               Generalize waveform handling in bxt_set_cdclk()]

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-4-mika.kahola@intel.com

drm/i915/display/dg2: Sanitize CD clock

In case of CD clock squashing the divider is always 1. We don't
need to calculate the divider in use so let's skip that for DG2.

v2: Drop unnecessary local variable (Ville)
v3: Avoid if-else structure (Ville)
[v4: vsyrjala: Fix cd2x divider calculation (Uma),
               Introduce has_cdclk_squasher()]

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-3-mika.kahola@intel.com

drm/i915/display/dg2: Introduce CD clock squashing table

For CD clock squashing method, we need to define corresponding CD clock table for
reference clocks, dividers and ratios for all CD clock options.

BSpec: 54034

v2: Add CD squashing waveforms as part of CD clock table (Ville)
v3: Waveform is 16 bits wide (Ville)
[v4: vsyrjala: Nuke the non-squasher based table,
               Set .divider=2 for consistency,
       Pack intel_cdclk_vals a bit nicer]
v5: Fix error in waveform value (Swati)
v6 (Lucas): Rebase on upstream
v7 (MattR): Drop 40.8, 81.6, and 122.4 MHz frequencies to reflect new
    bspec update.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-2-mika.kahola@intel.com

drm/i915/ddi: add use_edp_hobl() and use_edp_low_vswing() helpers

Localize HOBL and low vswing VBT lookups to a couple of small helpers,
and get rid of a bunch of local variables.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203131318.2885969-1-jani.nikula@intel.com

drm/i915/snps: use div32 version of MPLLB word clock for UHBR

The mode set sequence for 128b/132b requires setting the div32 version
of MPLLB clock.

Bspec: 53880, 54128
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202144456.2541305-1-jani.nikula@intel.com

drm/i915/xelpd: Add Pipe Color Lut caps to platform config

XE_LPD has 128 Lut entries for Degamma, with additional 3 entries for
extended range. It has 511 entries for gamma with additional 2 entries
for extended range.

v2: Updated lut size for 10bit gamma, added lut_tests (Ville)

v3: Dropped the gamma lut tests fields (Ville)

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-4-uma.shankar@intel.com

drm/i915/xelpd: Enable Pipe Degamma

Enable Pipe Degamma for XE_LPD. Extend the legacy implementation
to incorparate the extended lut size for XE_LPD.

v2: Added a helper for degamma lut size (Ville)

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-3-uma.shankar@intel.com

drm/i915/xelpd: Enable Pipe color support for D13 platform

Enable pipe color support for Display 13 platforms. Currently
limit to just 10bit gamma and later extend it for logarithmic
gamma, once the new UAPI is agreed by community and implemented
by a userspace consumer.

v2: Updated dev_priv to i915 (Ville)

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-2-uma.shankar@intel.com

drm/i915/dmc: Change max DMC FW size on ADL-P

Increase the max size of DMC on ADL-P to account for support of new
features in the current/upcoming DMC versions.

Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207023718.322349-1-madhumitha.tolakanahalli.pradeep@intel.com

drm/i915/adlp: Remove require_force_probe protection

Remove force probe protection from ADL_P platform. Did not obsevre
warnings, errors, flickering or any visual defects while doing ordinary
tasks like browsing and editing documents in a two monitor setup.

For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/drmtip.html?

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211204010140.22839-1-clinton.a.taylor@intel.com

drm/i915/adl_p: Add ddc pin mapping

From VBT, ddc pin info suggests the following mapping:
    VBT                                    DRIVER
    DDI TC1->ddc_pin=3 should translate to PORT_TC1->0x9
    DDI TC2->ddc_pin=4 should translate to PORT_TC2->0xa
    DDI TC3->ddc_pin=5 should translate to PORT_TC3->0xb
    DDI TC4->ddc_pin=6 should translate to PORT_TC4->0xc

Adding pin map to facilitate this translation as we cannot use existing
icl ddc pin map due to conflict with DDI C and DDI TC1 info.

Bspec:20124

v2:
  - Changed Author to Tejas Upadhyay

Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203073720.3823371-1-ravitejax.goud.talla@intel.com

drm/i915: Get rid of the "sizes are 0 based" stuff

Replace the "sizes are 0 based" stuff with just straight
up -1 where needed. Less confusing all around.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/fbc: Pimp the FBC debugfs output

Now that each plane tracks its own no_fbc_reason we can print that
out in debugfs, and we can also show which plane is currently
selected for FBC duty.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-21-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>