Merge tag 'drm-intel-next-2024-04-17-1' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next

Core Changes (DRM):

- Fix documentation of DP tunnel functions (Imre)
- DP MST read sideband messaging cap (Jani)
- Preparation patches for Adaptive Sync SDP Support for DP (Mitul)

Driver Changes:

i915 core (non-display):
- Documentation improvements (Nirmoy)
- Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas)
- Do not print 'pxp init failed with 0' when it succeed (Jose)
- Clean-up, including removal of dead code for unsupported platforms (Lucas)
- Adding new DG2 PCI ID (Ravi)

{i915,xe} display:
- Spelling fix (Colin Ian)
- Document CDCLK components (Gustavo)
- Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala)
- BIOS/VBT/opregion related refactor (Jani, Ville, RK)
- Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe)
- Digital port related refactor/clean-up (Ville)
- Fix 2s boot time regression on DP panel replay init (Animesh)
- Remove redundant drm_rect_visible() overlay use (Arthur)
- DSC HW state readout fixes (Imre)
- Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville)
- Disable AuxCCS framebuffers if built for Xe (Juha-Pekka)
- Fix DSI init order (Ville)
- DRRS related refactor and fixes (Bhanuprakash)
- Fix DSB vblank waits with VRR (Ville)
- General improvements on register name and use of REG_BIT (Ville)
- Some display power well related improvements (Ville)
- FBC changes for better w/a handling (Ville)
- Make crtc disable more atomic (Ville)
- Fix hwmon locking inversion in sysfs getter (Janusz)
- Increase DP idle pattern wait timeout to 2ms (Shekhar)
- PSR related fixes and improvents (Jouni)
- Start using container_of_const() for some extra const safety (Ville)
- Use drm_printer more on display code (Ville)
- Fix Jasper Lake boot freeze (Jonathon)
- Update Pipe src size check in skl_update_scaler (Ankit)
- Enable MST mode for 128b/132b single-stream sideband (Jani)
- Pass encoder around more for port/phy checks (Jani)
- Some initial work to make display code more independent from i915 (Jani)
- Pre-populate the cursor physical dma address (Ville)
- Do not bump min backlight brightness to max on enable (Gareth)
- Fix MTL supported DP rates - removal of UHBR13.5 (Arun)
- Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit)
- Bigjoiner modeset sequence redesign and MST support (Ville)
- Enable Adaptive Sync SDP Support for DP (Mitul)
- Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav)
- HDCP related fixes (Suraj)
- Fix i915_display_info debugfs when connectors are not active (Ville)
- Clean up on Xe compat layer (Jani)
- Add jitter WAs for MST/FEC/DSC links (Imre)
- DMC wakelock implementation (Luca)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r
# E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu
# bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF
# 02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv
# 8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ
# ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx
# 7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ==
# =JvZN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Apr 2024 23:22:09 AEST
# gpg:                using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zh_Q72gYKMMbge9A@intel.com

drm/i915/display: tie DMC wakelock to DC5/6 state transitions

We only need DMC wakelocks when we allow DC5 and DC6 states.  Add the
calls to enable and disable DMC wakelock accordingly.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-5-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: add module parameter to enable DMC wakelock

This feature should be disabled by default until properly tested and
mature.  Add a module parameter to enable the feature for testing,
while keeping it disabled by default for now.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-4-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: don't allow DMC wakelock on older hardware

Only allow running DMC wakelock code if the display version is 20 or
greater.  Also check if DMC is loaded before enabling.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-3-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: add support for DMC wakelocks

In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.

Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.

The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.

BSpec: 71583
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-2-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'amd-drm-next-6.10-2024-04-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.10-2024-04-13:

amdgpu:
- HDCP fixes
- ODM fixes
- RAS fixes
- Devcoredump improvements
- Misc code cleanups
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- SR-IOV fixes
- Suspend and Resume fixes
- DCN 3.5.x Updates
- Z8 fixes
- UMSCH fixes
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- VCN partitioning fix
- DC DWB fixes
- VSC SDP fixes
- DCN 3.1.6 fix
- GC 11.5 fixes
- Remove invalid TTM resource start check
- DCN 1.0 fixes

amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace

radeon:
- Misc code cleanups

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240413213708.3427038-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/amd/display: Add a function for checking tmds mode

[Why]
DVI is TMDS signal like HDMI but without audio.  Current signal check
does not correctly reflect DVI clock programming.

[How]
Define a new signal check for TMDS that includes DVI to HDMI TMDS
programming.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Modify power sequence

Need to update the power sequence to help prevent potential issues
like multi-display or multi-plane.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.280

This version brings along the following:
- DCN10 fixes
- DCN316 fixes
- DML2 fixes
- DWB fixes
- Expanded FAMS support
- Misc code style fixes
- ODM fixes
- VSC SDP fixes

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reorganize dwb header

This commit makes some small adjustments in the dwb header.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix memory leak in create_process failure

Fix memory leak due to a leaked mmget reference on an error handling
code path that is triggered when attempting to create KFD processes
while a GPU reset is in progress.

Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable")
CC: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change DPCD address range

Change DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT with
DP_PHY_REPEATER_128B132B_RATES.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add fallback configuration for set DRR in DCN10

Set OTG/OPTC parameters to 0 if something goes wrong on DCN10.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add fallback configuration when set DRR

Set OTG/OPTC parameter to 0 if failed to set DRR.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DCN10 resource

Update DCN10 to use legacy fast update and ensure that the MPCC count is
the same as the pipe_count.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable P010 Support of DCN 1.0

[WHY]
DCN 1.0 is not ready for the P010 support.

[HOW]
1. Set the P010 plan_cap of DCN 1.0 to be false.
2. Let the DM do the plan cap initialization of DCN 1.0.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Figo Wang <shen-hong.wang@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update resource capabilities and debug struct for DCN201

Some of the resource capabilities for DCN201 and the debug default
option are outdated. This commit just set some of the missing
configurations for DCN201.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop legacy code

This commit removes code that are not used by display anymore.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adjust some includes used by display

Some of the includes used in the DC can be removed and others need to be
update. This commit adjusts some of those headers in the display code.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add comments to improve the code readability

This commit just introduce some basic comments that helps to understand
the overall behavior of some structs.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove invalid resource->start check v2

The majority of those where removed in the commit aed01a68047b
("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")

But this one was missed because it's working on the resource and not the
BO. Since we also no longer use a fake start address for visible BOs
this will now trigger invalid mapping errors.

v2: also remove the unused variable

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
CC: stable@vger.kernel.org
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma6: set sdma hang watchdog

Set SDMAx_WATCHDOG_CNTL.QUEUE_HANG_COUNT registers
to improve SDMA reliability.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Update PF2VF Header

Adding a new field for GPU Capacity to align the header with the host.

Signed-off-by: Luqmaan Irshad <Luqmaan.Irshad@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915: Allow bigjoiner for MST

We need bigjoiner support with MST functionality
for MST monitor resolutions > 5K to work.
Adding support for the same.

v2: Addressed review comments from Jani.
Revert rejection of MST bigjoiner modes and add
functionality

v3: Fixed pipe_mismatch WARN for mst_master_transcoder
Credits-to: Manasi Navare <navaremanasi@chromium.org>
v4: Utilize intel_crtc_joined_pipe_mask() also for handling
    bigjoiner slave pipes for MST case(Stan)
[v5: vsyrjala: chunked the modeset squence stuff out,
               removed bogus mst master transcoder hack,
       keep mgr_lock near the full_pbn check]
[v6: vsyrjala: Calculate DSC slices correctly for bigjoiner (Imre)]

Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-7-ville.syrjala@linux.intel.com

drm/i915/mst: Add bigjoiner handling to MST modeset sequence

Loop over all joined pipes at relevant points in the MST
modeset sequence.

Carved out from Vidya's earlier big patch, with naming/etc.
changed to match the earlier hsw_crtc_enable() stuff.

Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Co-developed-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-6-ville.syrjala@linux.intel.com

drm/i915: Handle joined pipes inside hsw_crtc_enable()

Handle only bigjoiner masters in skl_commit_modeset_enables/disables,
slave crtcs should be handled by master hooks. Same for encoders.
That way we can also remove a bunch of checks like intel_crtc_is_bigjoiner_slave.

v2: - Moved skl_pfit_enable, intel_dsc_enable, intel_crtc_vblank_on to intel_enable_ddi,
      so that it is now finally symmetrical with the disable case, because currently
      for some weird reason we are calling those from skl_commit_modeset_enables, while
      for the disable case those are called from the ddi disable hooks.
v3: - Create intel_ddi_enable_hdmi_or_sst symmetrical to
      intel_ddi_post_disable_hdmi_or_sst and move it also under non-mst check.
v4: - Fix intel_enable_ddi sequence
    - Call intel_crtc_update_active_timings for slave pipes as well
[v5: vsyrjala: Use the name 'pipe_crtc' for the per-pipe crtc pointer
               Use consistent style and naming
       Protect macro arguments properly
               Drop superfluous changes to the modeset sequence,
       this now follows the old non-joiner sequence 100%
       apart from just looping in places]

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org> #v4?
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-5-ville.syrjala@linux.intel.com

drm/i915: Handle joined pipes inside hsw_crtc_disable()

Reorganize the crtc disable path to only deal with the
master pipes/transcoders in intel_old_crtc_state_disables()
and offload the handling of joined pipes to hsw_crtc_disable().
This makes the whole thing much more sensible since we can
actually control the order in which we do the per-pipe vs.
per-transcoder modeset steps.

v2: Use the name 'pipe_crtc' for the per-pipe crtc pointer

Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-4-ville.syrjala@linux.intel.com

drm/i915: Utilize intel_crtc_joined_pipe_mask() more

Unify the master vs. slave handling in
intel_ddi_post_disable_hdmi_or_sst() by looping over all the
pipes in one go.

This also lets us move the intel_crtc_vblank_off() calls to
happen in a consistent place vs. the transcoder disable.
Previously we did the master vs. slaves on different sides
of that.

v2: Use the name 'pipe_crtc' for the per-pipe crtc pointer

Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-3-ville.syrjala@linux.intel.com

drm/i915: Extract intel_ddi_post_disable_hdmi_or_sst()

Extract the "not-MST" stuff from intel_ddi_post_disable() so that
the whole thing isn't so cluttered.

The bigjoiner slave handling was outside of the !MST check,
but it really should have been inside it as its the counterpart
to the master handling inside the check. So we pull that
in as well. There is no functional change here as we don't
currently support bigjoiner+MST anyway.

v2: Rebase
v3: Actually extract the slave code as claimed in
    the commit message (presumably a rebase fail in v2)

Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163502.29633-2-ville.syrjala@linux.intel.com

drm/i915/psr: Use crtc_state->port_clock instead of intel_dp->link_rate

Intel_dp->link_rate is not yet set at this point. Instead use
crtc_state->port_clock.

Fixes: 0dd21f836983 ("drm/i915/psr: Silence period and lfps half cycle")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409085759.178235-1-jouni.hogander@intel.com

Merge tag 'drm-misc-next-2024-04-10' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.10:

Cross-subsystem Changes:
- Add Tomi as Xilinx maintainer.
- Add sound bindings to DT.

Core Changes:
- Make DP helper depend on KMS helper.

Driver Changes:
- Assorted small fixes to bridge/dw-hdmi, bridge/cdns-mhdp8456, xlnx,
  omap, tilcdc, bridge/imx8mp-hdmi-pvi.
- Add debugfs entries to qaic.
- Add conservative fallback to panel eDP.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dc690de5-17da-4af6-93a9-8078c99245fd@linux.intel.com

drm/i915/mtl: Add DP FEC BS jitter WA

Add a workaround to fix BS (blank start) to BS jitter fixes on non-UHBR
MST/FEC and UHBR links. Bspec doesn't provide an actual WA ID for this.

Bspec: 65448, 50054

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-7-imre.deak@intel.com

drm/i915/mtl+: Disable DP/DSC SF insertion at EOL WA

Disable the workaround inserting an SF symbol between the last DSC EOC
symbol and the subsequent BS symbol. The WA is enabled by default -
based on the register's reset value - and Bspec requires disabling it
explicitly. Bspec doesn't provide an actual WA ID for this.

Bspec: 50054, 65448, 68849

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-6-imre.deak@intel.com

drm/i915/adlp+: Add DSC early pixel count scaling WA (Wa_1409098942)

Add a workaround to fix timing issues on links with DSC enabled -
presumedly related to the audio functionality.

Bspec requires enabling this workaround if audio is enabled on ADLP,
however Windows enables it whenever DSC is enabled ADLP onwards; follow
Windows.

Bspec: 50490, 55424

v2: Fix WA code comment formatting. (Ankit)

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-5-imre.deak@intel.com

drm/i915/adlp: Add DP MST DPT/DPTP alignment WA (Wa_14014143976)

Add a workaround to fix BS-BS jitter issues on MST links, aligning
DPT/DPTP MTPs.

Bspec: 50050, 55424

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-4-imre.deak@intel.com

drm/i915/adlp: Add MST short HBlank WA (Wa_14014143976)

Add a workaround to fix BS jitter issues on MST links if the HBLANK
period is less than 1 MTP. The WA applies only to UHBR rates while on
non-UHBR the specification requires disabling it explicitly - presumedly
because the register's reset value has the WA enabled.

Bspec: 50050, 55424

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-3-imre.deak@intel.com

drm/i915/adlp: Add MST FEC BS jitter WA (Wa_14013163432)

Add a workaround to fix BS (blank start) to BS jitter issues on MST
links when FEC is enabled. Neither Bspec requires this nor Windows
clears the WA when disabling the output - presumedly because
CHICKEN_MISC_3 gets reset after disabling the pipe/transcoder - so
follow suit.

Bspec: 50050, 55424

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-2-imre.deak@intel.com

drm/bridge: imx8mp-hdmi-pvi: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304090555.716327-2-u.kleine-koenig@pengutronix.de

drm/i915/pps: move pps debugfs file to intel_pps.c

Continue with placing debugfs next to the implementation.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408094357.3085319-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm: tilcdc: don't use devm_pinctrl_get_select_default() in probe

Since commit ab78029ecc34 ("drivers/pinctrl: grab default handles from
device core"), we can rely on device core for setting the default pins.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922073714.6164-1-wsa+renesas@sang-engineering.com

drm/omap: dmm_tiler: drop driver owner assignment

Core in platform_driver_register() already sets the .owner, so driver
does not need to.  Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330202804.83936-1-krzysztof.kozlowski@linaro.org

drm: xlnx: db: fix a memory leak in probe

Free "dp" before returning.

Fixes: be318d01a903 ("drm: xlnx: dp: Reset DisplayPort IP")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86def134-9537-4939-912e-3a424e3a75b6@moroto.mountain

MAINTAINERS: Add myself as maintainer for Xilinx DRM drivers

Add myself as a co-maintainer for Xilinx DRM drivers to help Laurent.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327-xilinx-maintainer-v1-1-c5fdc115f448@ideasonboard.com

drm: remove unused header gma_drm.h

gma_drm.h has become an empty, unused header. Remove.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408104230.3191827-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/amdgpu: differentiate external rev id for gfx 11.5.0

This patch to differentiate external rev id for gfx 11.5.0.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: delete the redundant initialization in dcn3_51_soc

the dram_clock_change_latency_us in dcn3_51_soc is initialized twice, so
delete one of them.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: correct path of reference

The path to GPU documentation is Documentation/gpu
rather than Documentation/GPU

This appears to have been introduced by commit ba162ae749a5
("Documentation/gpu: Introduce a simple contribution list for display code")

Flagged by make htmldocs.

Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/radeon_display: Decrease the size of allocated memory

This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1] [2].

In this case, the memory allocated to store RADEONFB_CONN_LIMIT pointers
to "drm_connector" structures can be avoided. This is because this
memory area is never accessed.

Also, in the kzalloc function, it is preferred to use sizeof(*pointer)
instead of sizeof(type) due to the type of the variable can change and
one needs not change the former (unlike the latter).

At the same time take advantage to remove the "#if 0" block, the code
where the removed memory area was accessed, and the RADEONFB_CONN_LIMIT
constant due to now is never used.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://github.com/KSPP/linux/issues/160
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add V_TOTAL_REGS to dcn10

DCN10 OPTC is used by other DCNs, and in some cases it might be useful
to have V_TOTAL_REGS available. This commit add V_TOTAL_REGS as part of
the TG field.

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.212.0

 - Add boot option to change the ONO powerup flow, impacting
   the order of power domains to power up or down first

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Enabling urgent latency adjustment for DCN35"

This reverts commit b72a7e0fd0f8d235f885f84642e5c71f4e058c4b.

It causes a dead loop in dml_prefetch_check.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rebuild test pattern params for DP_TEST_PATTERN_VIDEO_MODE

[Why]
For video mode test pattern (i.e. test pattern disable), the call to
rebuild test pattern params for the pipe is skipped. This causes
dynamic disablement of test pattern to not work, as the
test_pattern_params of the pipe will not be updated and retain the
values of the previously enabled test pattern.

[How]
Rebuild test pattern params even when test pattern is video mode,
allowing the pipe to have updated test_pattern_params values.

Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adjust dprefclk by down spread percentage.

[Why]
OLED panels show no display for large vtotal timings.

[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.

Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST

The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.

Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4

In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.

Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dwb support to dml2

[why]
dwb was not POR previosly.
now need to enable dwb in dml2.

Limitation:
HW DML assumes only one DWB
one set of watermark for all 4 watermark sets
one stream has one DWB only.
WB scaling dml input has one set of scaling tap.
(no chroma so far)

needs to follow up

Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor vpg.h

why and how:
as part of cleanup, need to refactor vpg. It was improperly referenced
as a dcn specfic part of link. the dcn agnostic code needed was ripped out
and put into vpg.h, now in dc/inc/hw.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Parandhaman K <parandhaman.k@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: expand the non standard link rate for testing

[Why]
6.75 Gbps link rate training for DP_TEST_LINK_RATE_RATE_8

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix disable otg wa logic in DCN316

[Why]
Wrong logic cause screen corruption.

[How]
Port logic from DCN35/314.

Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not recursively call manual trigger programming

[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.

Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add driver support for future FAMS versions

[WHY&HOW]
Changes to support future versions of FAMS.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Allow setting soft max frequency in VF

Setting soft max frequency for MCLK is allowed in 1VF mode in SMUv13.0.6
SOCs.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix an incorrect ODM policy assigned for subvp

[why]
When Subvp pipe's index is smaller than main pipe's index, the main
pipe's ODM policy is not yet assigned. If we assign subvp pipe's ODM
policy based on main pipe, we will assign uninitialized ODM policy.

[how]
Instead of copying main pipe's policy we copy the main pipe ODM policy
logic. So it doesn't matter whether if main pipe's ODM policy is set,
phantom pipe will always have the same policy because it running the
same calcualtion to derive ODM policy.

Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: always reset ODM mode in context when adding first plane

[why]
In current implemenation ODM mode is only reset when the last plane is
removed from dc state. For any dc validate we will always remove all
current planes and add new planes. However when switching from no planes
to 1 plane, ODM mode is not reset because no planes get removed. This
has caused an issue where we kept ODM combine when it should have been
remove when a plane is added. The change is to reset ODM mode when
adding the first plane.

Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix incorrect number of active RBs for gfx11

The RB bitmap should be global active RB bitmap &
active RB bitmap based on active SA.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Return max resolution supported by DWB

mode_config's max width x height is 4096x2160 and is higher than DWB's
max resolution 3840x2160 which is returned instead.

Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add option to configure mapping policy for edp0 on dp1

[Why]
We want flexibility to choose how pwrseq instance is mapped to eDP panel

[How]
Add configuration option to choose the pwrseq mapping policy.
When enabled, allow fixed mapping between DIG inst to pwrseq inst.

Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/amdgpu: improve VF recover time

1. change AMDGPU_VF2PF_UPDATE_MAX_RETRY_LIMIT from 30 to 5.
2. set fatel error detected flag.

Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/amdkfd: sync all devices to wait all processes being evicted

If there are more than one device doing reset in parallel, the first
device will call kfd_suspend_all_processes() to evict all processes
on all devices, this call takes time to finish. other device will
start reset and recover without waiting. if the process has not been
evicted before doing recover, it will be restored, then caused page
fault.

Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Categorize RAS messages on SMUv13.0.6

Set RAS priority handling capability for SMUv13.0.6 SOCs and categorize
RAS priority messages allowed.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add special handling for RAS messages

When a RAS fatal error is detected, PMFW will only process priority
messages. Other messages won't be taken up for processing and therefore
won't get any response in such a state.

Add logic to filter out non-priority messages when RAS error is
detected. Also, don't poll response response status register before
sending priority messages. Use firmware capability flag to determine
whether to filter priority messages.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add PMFW message and capability flags

Add flags to categorize messages and PMFW capabilities.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set fatal errror detected flag earlier

In case of fatal errors, set FED status when interrupt is received. Set
the flag on other devices in the hive before RAS recovery work.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing parameter desc in dc_commit_streams

This commit removes the lines that describe the 'streams'
and 'stream_count' parameters and adds a line to describe the 'params'
parameter, which was missing from the original comment block.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Function parameter or member 'params' not described in 'dc_commit_streams'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Excess function parameter 'streams' description in 'dc_commit_streams'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Excess function parameter 'stream_count' description in 'dc_commit_streams'

Fixes: e779f4587f61 ("drm/amd/display: Add handling for DC power mode")
Cc: Joshua Aberback <joshua.aberback@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Update uclk/sclk limit report format

Use OD (pp_od_clk_voltage) interface to report current limits,
default or those set by user, for SCLK and UCLK on aldebaran.

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Report uclk/sclk current limits

Use OD (pp_od_clk_voltage) interface to report current limits,
default or those set by user, for SCLK and UCLK on smu_v_13_0_6

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clear set_q_mode_offs when VM changed

[Why]
set_q_mode_offs don't get cleared after GPU reset, nexting SET_Q_MODE
packet to init shadow memory will be skiped, hence there has a page fault.

[How]
VM flush is needed after GPU reset, clear set_q_mode_offs when
emitting VM flush.

Fixes: 8bc75586ea01 ("drm/amdgpu: workaround to avoid SET_Q_MODE packets v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: retire UMC v12 mca_addr_to_pa

RAS TA will handle it, the function is useless.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: support MES command SET_HW_RESOURCE1 in sriov

support MES command SET_HW_RESOURCE1 in sriov

Signed-off-by: chongli2 <chongli2@amd.com>
Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update check condition for XGMI ACA UE

Check more possible ext error codes.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update XGMI RAS UE criteria for sum v13.0.6

Add more possible ext error code.

v2: still use ext error code instead of UC bit.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix VCN allocation in CPX partition

VCN need not be shared in CPX mode always for all GFX 9.4.3 SOC SKUs. In
certain configs, VCN instance can be exclusively allocated to a
partition even under CPX mode.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: Check AMDGPU_RUNPM_BAMACO when setting baco state

Check AMDGPU_RUNPM_BAMACO intead of amdgpu_runtime_pm
when setting baco state.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add support for BAMACO mode checking

Optimize the code to add support for BAMACO mode checking

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: centralize all pp_dpm_xxx attribute nodes update cb

centralize all pp_dpm_xxx attr nodes into
pp_dpm_clk_default_attr_update() function.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Bypass asd if display hw is not available

ASD is not needed by headless GPU.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: Add support for MACO flag checking

Add support for MACO flag checking.
MACO mode only works if BACO is supported.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: Change the member function name in pp_hwmgr_func and pptable_funcs

Use a unified and more explicit name get_bamaco_support
to replace is_baco_support and get_asic_baco_capability

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add a new runtime mode definition

Add a new runtime pm mode AMDGPU_RUNPM_BAMACO
and related macro definition

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix the high voltage issue after unload

fix the high voltage issue after unload on smu 13.0.10

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable FGCG for DCN351

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add color logs for dcn20

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Includes adjustments

This commit clean up some of the includes used by DCN.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add code comments clock and encode code

This commit adds some comments to make easier to understand the clock
update for DCN 201, the encode function, and other minor comments.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add WBSCL ram coefficient for writeback

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix MPCC DTN logging

[Why]
DTN only logs 'pipe_count' instances of MPCC.
However in some cases there are different number of
MPCC than DPP (pipe_count).

[How]
Add mpcc_count parameter to resource_pool and set it
during pool construction and use it for DTN logging of
MPCC state.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Initialize debug variable data

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing SFB and OPP_SF

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove redundant RESERVE0 and RESERVE1

This commit drops the RESERVE0 and RESERVE1 since both of them can be
summarized as RESERVED.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing registers

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>