selftests: net: Correct couple of spelling mistakes

Changes :
- "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh
- "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh

Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228120701.422264-1-pvkumar5749404@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-userspace-pm'

Matthieu Baerts says:

====================
mptcp: userspace pm: 'dump addrs' and 'get addr'

This series from Geliang adds two new Netlink commands to the userspace
PM:

- one to dump all addresses of a specific MPTCP connection:
  - feature added in patches 3 to 5
  - test added in patches 7, 8 and 10

- and one to get a specific address for an MPTCP connection:
  - feature added in patches 11 to 13
  - test added in patches 14 and 15

These new Netlink commands can be useful if an MPTCP daemon lost track
of the different connections, e.g. after having been restarted.

The other patches are some clean-ups and small improvements added
while working on the new features.

====================

Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>

selftests: mptcp: userspace pm get addr tests

This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mptcp: add token for get_addr

The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:

pm_nl_ctl get $id

This patch adds token argument for it to support userspace PM:

pm_nl_ctl get $id token $token

If 'token $token' is passed to get_addr(), copy it into the kernel netlink.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: get addr in userspace pm list

This patch renames mptcp_pm_nl_get_addr_doit() as a dedicated in-kernel
netlink PM get addr function mptcp_pm_nl_get_addr(). and invoke a new
wrapper mptcp_pm_get_addr() in mptcp_pm_nl_get_addr_doit.

If a token is gotten in the wrapper, that means a userspace PM is used.
So invoke mptcp_userspace_pm_get_addr() to get addr in userspace PM list.
Otherwise, invoke mptcp_pm_nl_get_addr().

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: implement mptcp_userspace_pm_get_addr

This patch implements mptcp_userspace_pm_get_addr() to get an address
from userspace pm address list according the given 'token' and 'id'.
Use nla_get_u32() to get the u32 value of 'token', then pass it to
mptcp_token_get_sock() to get the msk. Pass 'msk' and 'id' to the helper
mptcp_userspace_pm_lookup_addr_by_id() to get the address entry. Put
this entry to userspace using mptcp_pm_nl_put_entry_info().

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: add userspace_pm_lookup_addr_by_id helper

Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM,
this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to
lookup the address entry with the given id on the userspace pm local
address list.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mptcp: dump userspace addrs list

This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mptcp: add mptcp_lib_check_output helper

Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.

This helper will be used for userspace dump addresses tests.

Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mptcp: add token for dump_addr

The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:

        pm_nl_ctl dump

This patch adds token argument for it to support userspace PM:

        pm_nl_ctl dump token $token

If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mptcp: add userspace pm subflow flag

This patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in
pm_nl_ctl.c when subflow is created by a userspace PM.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: check userspace pm flags

Just like MPTCP_PM_ADDR_FLAG_SIGNAL flag is checked in userspace PM
announce mptcp_pm_nl_announce_doit(), PM flags should be checked in
mptcp_pm_nl_subflow_create_doit() too.

If MPTCP_PM_ADDR_FLAG_SUBFLOW flag is not set, there's no flags field
in the output of dump_addr. This looks a bit strange:

        id 10 flags  10.0.3.2

This patch uses mptcp_pm_parse_entry() instead of mptcp_pm_parse_addr()
to get the PM flags of the entry and check it. MPTCP_PM_ADDR_FLAG_SIGNAL
flag shouldn't be set here, and if MPTCP_PM_ADDR_FLAG_SUBFLOW flag is
missing from the netlink attribute, always set this flag.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: dump addrs in userspace pm list

This patch renames mptcp_pm_nl_get_addr_dumpit() as a dedicated in-kernel
netlink PM dump addrs function mptcp_pm_nl_dump_addr(), and invoke a newly
added wrapper mptcp_pm_dump_addr() in mptcp_pm_nl_get_addr_dumpit().

Invoke in-kernel PM dump addrs function mptcp_pm_nl_dump_addr() or
userspace PM dump addrs function mptcp_userspace_pm_dump_addr() based on
whether the token parameter is passed in or not in the wrapper.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: add token for get-addr in yaml

This patch adds token parameter together with addr in get-addr section in
mptcp_pm.yaml, then use the following commands to update mptcp_pm_gen.c
and mptcp_pm_gen.h:

./tools/net/ynl/ynl-gen-c.py --mode kernel \
        --spec Documentation/netlink/specs/mptcp_pm.yaml --source \
        -o net/mptcp/mptcp_pm_gen.c
./tools/net/ynl/ynl-gen-c.py --mode kernel \
        --spec Documentation/netlink/specs/mptcp_pm.yaml --header \
        -o net/mptcp/mptcp_pm_gen.h

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: implement mptcp_userspace_pm_dump_addr

This patch implements mptcp_userspace_pm_dump_addr() to dump addresses
from userspace pm address list. Use mptcp_token_get_sock() to get the
msk from the given token, if userspace PM is enabled in it, traverse
each address entry in address list, put every entry to userspace using
mptcp_pm_nl_put_entry_msg().

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: export mptcp_genl_family & mptcp_nl_fill_addr

This patch exports struct mptcp_genl_family and mptcp_nl_fill_addr() helper
to allow them can be used in pm_userspace.c.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: make pm_remove_addrs_and_subflows static

mptcp_pm_remove_addrs_and_subflows() is only used in pm_netlink.c, it's
no longer used in pm_userspace.c any more since the commit 8b1c94da1e48
("mptcp: only send RM_ADDR in nl_cmd_remove"). So this patch changes it
to a static function.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ipa-device-pointer-access'

Alex Elder says:

====================
net: ipa: simplify device pointer access

This version of this patch series fixes the bugs in the first patch
(which were fixed in the second), where ipa_interrupt_config() had
two remaining spots that returned a pointer rather than an integer.

Outside of initialization, all uses of the platform device pointer
stored in the IPA structure determine the address of device
structure embedded within the platform device structure.

By changing some of the initialization functions to take a platform
device as argument we can simplify getting at the device structure
address by storing it (instead of the platform device pointer) in
the IPA structure.

The first two patches split the interrupt initialization code into
two parts--one done earlier than before.  The next four patches
update some initialization functions to take a platform device
pointer as argument.  And the last patch replaces the platform
device pointer with a device pointer, and converts all remaining
references to the &ipa->pdev->dev to use ipa->dev.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: don't save the platform device

The IPA platform device is now only used as the structure containing
the IPA device structure.  Replace the platform device pointer with
a pointer to the device structure.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: pass a platform device to ipa_smp2p_init()

Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_smp2p_init().  Use
that pointer throughout that function.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: pass a platform device to ipa_smp2p_irq_init()

Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_smp2p_irq_init().
Use that pointer throughout that function (without assuming it's
the same as the IPA platform device pointer).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: pass a platform device to ipa_mem_init()

Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_mem_init().  Use
that pointer throughout that function.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: pass a platform device to ipa_reg_init()

Rather than using the platform device pointer field in the IPA
pointer, pass a platform device pointer to ipa_reg_init().  Use
that pointer throughout that function.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: introduce ipa_interrupt_init()

Create a new function ipa_interrupt_init() that is called at probe
time to allocate and initialize the IPA interrupt data structure.
Create ipa_interrupt_exit() as its inverse.

This follows the normal IPA driver pattern of *_init() functions
doing things that can be done before access to hardware is required.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: change ipa_interrupt_config() prototype

Change the return type of ipa_interrupt_config() to be an error
code rather than an IPA interrupt structure pointer, and assign the
the pointer within that function.

Change ipa_interrupt_deconfig() to take the IPA pointer as argument
and have it invalidate the ipa->interrupt pointer.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mptcp-lowat-sockopt'

Matthieu Baerts says:

====================
mptcp: add TCP_NOTSENT_LOWAT sockopt support

Patch 3 does the magic of adding TCP_NOTSENT_LOWAT support, all the
other ones are minor cleanup seen along when working on the new
feature.

Note that this feature relies on the existing accounting for snd_nxt.
Such accounting is not 110% accurate as it tracks the most recent
sequence number queued to any subflow, and not the actual sequence
number sent on the wire. Paolo experimented a lot, trying to implement
the latter, and in the end it proved to be both "too complex" and "not
necessary".

The complexity raises from the need for additional lock and a lot of
refactoring to introduce such protections without adding significant
overhead. Additionally, snd_nxt is currently used and exposed with the
current semantic by the internal packet scheduling. Introducing a
different tracking will still require us to keep the old one.

More interestingly, a more accurate tracking could be not strictly
necessary: as the MPTCP socket enqueues data to the subflows only up
to the available send window, any enqueue data is sent on the wire
instantly, without any blocking operation short or a drop in the tx
path at the nft or TC layer.
====================

Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>

mptcp: cleanup SOL_TCP handling

Most TCP-level socket options get an integer from user space, and
set the corresponding field under the msk-level socket lock.

Reduce the code duplication moving such operations in the common code.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: implement TCP_NOTSENT_LOWAT support

Add support for such socket option storing the user-space provided
value in a new msk field, and using such data to implement the
_mptcp_stream_memory_free() helper, similar to the TCP one.

To avoid adding more indirect calls in the fast path, open-code
a variant of sk_stream_memory_free() in mptcp_sendmsg() and add
direct calls to the mptcp stream memory free helper where possible.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/464
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: avoid some duplicate code in socket option handling

The mptcp_get_int_option() helper is needless open-coded in a
couple of places, replace the duplicate code with the helper
call.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: cleanup writer wake-up

After commit 5cf92bbadc58 ("mptcp: re-enable sndbuf autotune"), the
MPTCP_NOSPACE bit is redundant: it is always set and cleared together with
SOCK_NOSPACE.

Let's drop the first and always relay on the latter, dropping a bunch
of useless code.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: nlmon: Simplify nlmon_get_stats64

Do not set rtnl_link_stats64 fields to zero, since they are zeroed
before ops->ndo_get_stats64 is called in core dev_get_stats() function.

Also, simplify the data collection by removing the temporary variable.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: nlmon: Remove init and uninit functions

With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the nlmon driver and leverage the network
core allocation.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Octeontx2-af: Fix an issue in firmware shared data reserved space

The last patch which added support to extend the firmware shared
data to add channel data information has introduced a bug due to
the reserved space not adjusted accordingly.

This patch fixes the issue and also adds BUILD_BUG to avoid this
regression error.

Fixes: 997814491cee ("Octeontx2-af: Fetch MAC channel info from firmware")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

eth: igc: remove unused embedded struct net_device

struct net_device poll_dev in struct igc_q_vector was added
in one of the initial commits, but never used.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-gve-header-split-support'

Ziwei Xiao says:

====================
gve: Add header split support

Currently, the ethtool's ringparam has added a new field
tcp-data-split for enabling and disabling header split. These three
patches will utilize that ethtool flag to support header split in GVE
driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

gve: Add header split ethtool stats

To record the stats of header split packets, three stats are added in
the driver's ethtool stats.

- rx_hsplit_pkt is the split packets count with header split
- rx_hsplit_bytes is the received header bytes count with header split
- rx_hsplit_unsplit_pkt is the unsplit packet count due to header buffer
  overflow or zero header length when header split is enabled

Currently, it's entering the stats_update critical section more than
once per packet. We have plans to avoid that in the future change to let
all the stats_update happen in one place at the end of
`gve_rx_poll_dqo`.

Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gve: Add header split data path

Add header buffers and ethtool support to enable header split via the
tcp-data-split flag in ethtool's ringparam config. A coherent dma memory
is allocated for the header buffers. There is one header buffer per ring
entry by calculating the offset to the header-buffers starting address.
The header buffer is always copied directly into the skb and payload is
always added as frags. When there is a header buffer overflow or the
header length is 0, the driver places the whole unsplit packet in frags.

When toggling header split, the driver will call gve_adjust_config to
set its queues appropriately. If header split is enabled by the user and
the max packet buffer size is no less than 4KB, driver will set the
packet buffer size as 4KB to support TCP_ZEROCOPY_RECEIVE. Otherwise the
driver will use the default 2KB as the packet buffer size.

`ethtool -G <dev> tcp-data-split on/off` is the command to toggle header
split.
`ethtool -g <dev>` will show the status of header split with the field
of `tcp-data-split`.

Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gve: Add header split device option

To enable header split via ethtool, we first need to query the device to
get the max rx buffer size and header buffer size. Add a device option
to get these values and store them in the driver. If the header buffer
size received from the device is non-zero, it means header split is
supported in the device.

Currently the max rx buffer size will only be used when header split is
enabled which will set the data_buffer_size_dqo to be the max rx buffer
size. Also change the data_buffer_size_dqo from int to u16 since we are
modifying it and making it to be consistent with max_rx_buffer_size.

Co-developed-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ip6_tunnel: Leverage core stats allocator

With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the ip6_tunnel driver and leverage the network
core allocation instead.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ionic-cleanups-and-perf-tuning'

Shannon Nelson says:

====================
ionic: code cleanup and performance tuning

Brett has been performance testing and code tweaking and has
come up with several improvements for our fast path operations.

In a simple single thread / single queue iperf case on a 1500 MTU
connection we see an improvement from 74.2 to 86.7 Gbits/sec.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: change MODULE_AUTHOR to person name

The MODULE_AUTHOR macro is supposed to be a person
not a company.

Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Clean RCT ordering issues

Clean up complaints from an xmastree.py scan.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Use CQE profile for dim

Use the kernel's CQE dim table to align better with the
driver's use of completion queues, and use the tx moderation
when using Tx interrupts.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: change the hwstamp likely check

An earlier change moved the hwstamp queue check into a helper
function with an unlikely(). However, it makes more sense for
the caller to decide if it's likely() or unlikely(), so make
the change to support that.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: reduce the use of netdev

To help make sure we're only accessing things we really need
to access we can cut down on the q->lif->netdev references by
using q->dev which is already in cache.

Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Pass local netdev instead of referencing struct

Instead of using q->lif->netdev, just pass the netdev when it's
locally defined.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Check stop no restart

If there is a lot of transmit traffic the driver can get into a
situation that the device is starved due to the doorbell never
being rung. This can happen if xmit_more is set constantly
and __netdev_tx_sent_queue() keeps returning false. Fix this
by checking if the queue needs to be stopped right before
calling __netdev_tx_sent_queue(). Use MAX_SKB_FRAGS + 1 as the
stop condition because that's the maximum number of frags
supported for non-TSO transmit.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Clean up BQL logic

The driver currently calls netdev_tx_completed_queue() for every
Tx completion. However, this API is only meant to be called once
per NAPI if any Tx work is done.  Make the necessary changes to
support calling netdev_tx_completed_queue() only once per NAPI.

Also, use the __netdev_tx_sent_queue() API, which supports the
xmit_more functionality.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Make use napi_consume_skb

Make use of napi_consume_skb so that skb recycling
can happen by way of the napi_skb_cache.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Shorten a Tx hotpath

Perf was showing some hot spots in ionic_tx_descs_needed()
for TSO traffic.  Rework the function to return sooner where
possible.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Change default number of descriptors for Tx and Rx

Cut down the number of default Tx and Rx descriptors to save
initial memory requirements.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: Rework Tx start/stop flow

Currently the driver attempts to wake the Tx queue
for every descriptor processed. However, this is
overkill and can cause thrashing since Tx xmit can be
running concurrently on a different CPU than Tx clean.
Fix this by refactoring Tx cq servicing into its own
function so the Tx wake code can run after processing
all Tx descriptors.

The driver isn't using the expected memory barriers
to make sure the stop/start bits are coherent. Fix
this by  making sure to use the correct memory barriers.

Also, the driver is using the wake API during Tx
xmit even though it's already scheduled. Fix this by
using the start API during Tx xmit.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: leds: pwm-multicolour: re-allow active-low

active-low was lifted to the common schema for leds, but it went
unnoticed that the leds-multicolour binding had "additionalProperties:
false" where the other users had "unevaluatedProperties: false", thereby
disallowing active-low for multicolour leds. Explicitly permit it again.

Fixes: c94d1783136e ("dt-bindings: net: phy: Make LED active-low property common")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bareudp: Remove generic .ndo_get_stats64

Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.

Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bareudp: Do not allocate stats in the driver

With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the bareudp driver and leverage the network
core allocation.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'skb-helpers'

Eric Dumazet says:

====================
net: better use of skb helpers

First patch is a pure cleanup.

Second patch adds a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len(),
this could help to discover old bugs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: adopt skb_network_header_len() more broadly

(skb_transport_header(skb) - skb_network_header(skb))
can be replaced by skb_network_header_len(skb)

Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len()
to catch cases were the transport_header was not set.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: adopt skb_network_offset() and similar helpers

This is a cleanup patch, making code a bit more concise.

1) Use skb_network_offset(skb) in place of
       (skb_network_header(skb) - skb->data)

2) Use -skb_network_offset(skb) in place of
       (skb->data - skb_network_header(skb))

3) Use skb_transport_offset(skb) in place of
       (skb_transport_header(skb) - skb->data)

4) Use skb_inner_transport_offset(skb) in place of
       (skb_inner_transport_header(skb) - skb->data)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2024-02-29

We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).

The main changes are:

1) Extend the BPF verifier to enable static subprog calls in spin lock
   critical sections, from Kumar Kartikeya Dwivedi.

2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
   in BPF global subprogs, from Andrii Nakryiko.

3) Larger batch of riscv BPF JIT improvements and enabling inlining
   of the bpf_kptr_xchg() for RV64, from Pu Lehui.

4) Allow skeleton users to change the values of the fields in struct_ops
   maps at runtime, from Kui-Feng Lee.

5) Extend the verifier's capabilities of tracking scalars when they
   are spilled to stack, especially when the spill or fill is narrowing,
   from Maxim Mikityanskiy & Eduard Zingerman.

6) Various BPF selftest improvements to fix errors under gcc BPF backend,
   from Jose E. Marchesi.

7) Avoid module loading failure when the module trying to register
   a struct_ops has its BTF section stripped, from Geliang Tang.

8) Annotate all kfuncs in .BTF_ids section which eventually allows
   for automatic kfunc prototype generation from bpftool, from Daniel Xu.

9) Several updates to the instruction-set.rst IETF standardization
   document, from Dave Thaler.

10) Shrink the size of struct bpf_map resp. bpf_array,
    from Alexei Starovoitov.

11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
    from Benjamin Tissoires.

12) Fix bpftool to be more portable to musl libc by using POSIX's
    basename(), from Arnaldo Carvalho de Melo.

13) Add libbpf support to gcc in CORE macro definitions,
    from Cupertino Miranda.

14) Remove a duplicate type check in perf_event_bpf_event,
    from Florian Lehner.

15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
    with notrace correctly, from Yonghong Song.

16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
    array to fix build warnings, from Kees Cook.

17) Fix resolve_btfids cross-compilation to non host-native endianness,
    from Viktor Malik.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
  selftests/bpf: Test if shadow types work correctly.
  bpftool: Add an example for struct_ops map and shadow type.
  bpftool: Generated shadow variables for struct_ops maps.
  libbpf: Convert st_ops->data to shadow type.
  libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
  bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
  bpf, arm64: use bpf_prog_pack for memory management
  arm64: patching: implement text_poke API
  bpf, arm64: support exceptions
  arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
  bpf: add is_async_callback_calling_insn() helper
  bpf: introduce in_sleepable() helper
  bpf: allow more maps in sleepable bpf programs
  selftests/bpf: Test case for lacking CFI stub functions.
  bpf: Check cfi_stubs before registering a struct_ops type.
  bpf: Clarify batch lookup/lookup_and_delete semantics
  bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
  bpf, docs: Fix typos in instruction-set.rst
  selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
  bpf: Shrink size of struct bpf_map/bpf_array.
  ...
====================

Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'inet_dump_ifaddr-no-rtnl'

Eric Dumazet says:

====================
inet: no longer use RTNL to protect inet_dump_ifaddr()

This series convert inet so that a dump of addresses (ip -4 addr)
no longer requires RTNL.
====================

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: use xa_array iterator to implement inet_dump_ifaddr()

1) inet_dump_ifaddr() can can run under RCU protection
   instead of RTNL.

2) properly return 0 at the end of a dump, avoiding an
   an extra recvmsg() system call.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: prepare inet_base_seq() to run without RTNL

In the following patch, inet_base_seq() will no longer be called
with RTNL held.

Add READ_ONCE()/WRITE_ONCE() annotations in dev_base_seq_inc()
and inet_base_seq().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: annotate data-races around ifa->ifa_flags

ifa->ifa_flags can be read locklessly.

Add appropriate READ_ONCE()/WRITE_ONCE() annotations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: annotate data-races around ifa->ifa_preferred_lft

ifa->ifa_preferred_lft can be read locklessly.

Add appropriate READ_ONCE()/WRITE_ONCE() annotations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: annotate data-races around ifa->ifa_valid_lft

ifa->ifa_valid_lft can be read locklessly.

Add appropriate READ_ONCE()/WRITE_ONCE() annotations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: annotate data-races around ifa->ifa_tstamp and ifa->ifa_cstamp

ifa->ifa_tstamp can be read locklessly.

Add appropriate READ_ONCE()/WRITE_ONCE() annotations.

Do the same for ifa->ifa_cstamp to prepare upcoming changes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'netdevsim-link'

David Wei says:

====================
netdevsim: link and forward skbs between ports

This patchset adds the ability to link two netdevsim ports together and
forward skbs between them, similar to veth. The goal is to use netdevsim
for testing features e.g. zero copy Rx using io_uring.

This feature was tested locally on QEMU, and a selftest is included.

I ran netdev selftests CI style and all tests but the following passed:
- gro.sh
- l2tp.sh
- ip_local_port_range.sh

gro.sh fails because virtme-ng mounts as read-only and it tries to write
to log.txt. This issue was reported to virtme-ng upstream.

l2tp.sh and ip_local_port_range.sh both fail for me on net-next/main as
well.

---
v13->v14:
- implement ndo_get_iflink()
- fix returning 0 if peer is already linked during linking or not linked
  during unlinking
- bump dropped counter if nsim_ipsec_tx() fails and generally reorder
  nsim_start_xmit()
- fix overflowing lines and indentations

v12->v13:
- wait for socat listening port to be ready before sending data in
  selftest

v11->v12:
- fix leaked netns refs
- fix rtnetlink.sh kci_test_ipsec_offload() selftest

v10->v11:
- add udevadm settle after creating netdevsims in selftest

v9->v10:
- fix not freeing skb when not there is no peer
- prevent possible id clashes in selftest
- cleanup selftest on error paths

v8->v9:
- switch to getting netns using fd rather than id
- prevent linking a netdevsim to itself
- update tests

v7->v8:
- fix not dereferencing RCU ptr using rcu_dereference()
- remove unused variables in selftest

v6->v7:
- change link syntax to netnsid:ifidx
- replace dev_get_by_index() with __dev_get_by_index()
- check for NULL peer when linking
- add a sysfs attribute for unlinking
- only update Tx stats if not dropped
- update selftest

v5->v6:
- reworked to link two netdevsims using sysfs attribute on the bus
  device instead of debugfs due to deadlock possibility if a netdevsim
  is removed during linking
- removed unnecessary patch maintaining a list of probed nsim_devs
- updated selftest

v4->v5:
- reduce nsim_dev_list_lock critical section
- fixed missing mutex unlock during unwind ladder
- rework nsim_dev_peer_write synchronization to take devlink lock as
  well as rtnl_lock
- return err msgs to user during linking if port doesn't exist or
  linking to self
- update tx stats outside of RCU lock

v3->v4:
- maintain a mutex protected list of probed nsim_devs instead of using
  nsim_bus_dev
- fixed synchronization issues by taking rtnl_lock
- track tx_dropped skbs

v2->v3:
- take lock when traversing nsim_bus_dev_list
- take device ref when getting a nsim_bus_dev
- return 0 if nsim_dev_peer_read cannot find the port
- address code formatting
- do not hard code values in selftests
- add Makefile for selftests

v1->v2:
- renamed debugfs file from "link" to "peer"
- replaced strstep() with sscanf() for consistency
- increased char[] buf sz to 22 for copying id + port from user
- added err msg w/ expected fmt when linking as a hint to user
- prevent linking port to itself
- protect peer ptr using RCU

====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netdevsim: fix rtnetlink.sh selftest

I cleared IFF_NOARP flag from netdevsim dev->flags in order to support
skb forwarding. This breaks the rtnetlink.sh selftest
kci_test_ipsec_offload() test because ipsec does not connect to peers it
cannot transmit to.

Fix the issue by adding a neigh entry manually. ipsec_offload test now
successfully pass.

Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdevsim: add selftest for forwarding skb between connected ports

Connect two netdevsim ports in different namespaces together, then send
packets between them using socat.

Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdevsim: add ndo_get_iflink() implementation

Add an implementation for ndo_get_iflink() in netdevsim that shows the
ifindex of the linked peer, if any.

Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdevsim: forward skbs from one connected port to another

Forward skbs sent from one netdevsim port to its connected netdevsim
port using dev_forward_skb, in a spirit similar to veth.

Add a tx_dropped variable to struct netdevsim, tracking the number of
skbs that could not be forwarded using dev_forward_skb().

The xmit() function accessing the peer ptr is protected by an RCU read
critical section. The rcu_read_lock() is functionally redundant as since
v5.0 all softirqs are implicitly RCU read critical sections; but it is
useful for human readers.

If another CPU is concurrently in nsim_destroy(), then it will first set
the peer ptr to NULL. This does not affect any existing readers that
dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is
a synchronize_rcu() before the netdev is actually unregistered and
freed. This ensures that any readers i.e. xmit() that got a non-NULL
peer will complete before the netdev is freed.

Any readers after the RCU_INIT_POINTER() but before synchronize_rcu()
will dereference NULL, making it safe.

The codepath to nsim_destroy() and nsim_create() takes both the newly
added nsim_dev_list_lock and rtnl_lock. This makes it safe with
concurrent calls to linking two netdevsims together.

Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdevsim: allow two netdevsim ports to be connected

Add two netdevsim bus attribute to sysfs:
/sys/bus/netdevsim/link_device
/sys/bus/netdevsim/unlink_device

Writing "A M B N" to link_device will link netdevsim M in netnsid A with
netdevsim N in netnsid B.

Writing "A M" to unlink_device will unlink netdevsim M in netnsid A from
its peer, if any.

rtnl_lock is taken to ensure nothing changes during the linking.

Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'selftests-xfail'

Jakub Kicinski says:

====================
selftests: kselftest_harness: support using xfail

When running selftests for our subsystem in our CI we'd like all
tests to pass. Currently some tests use SKIP for cases they
expect to fail, because the kselftest_harness limits the return
codes to pass/fail/skip. XFAIL which would be a great match
here cannot be used.

Remove the no_print handling and use vfork() to run the test in
a different process than the setup. This way we don't need to
pass "failing step" via the exit code. Further clean up the exit
codes so that we can use all KSFT_* values. Rewrite the result
printing to make handling XFAIL/XPASS easier. Support tests
declaring combinations of fixture + variant they expect to fail.

Merge plan is to put it on top of -rc6 and merge into net-next.
That way others should be able to pull the patches without
any networking changes.

v4:
 - rebase on top of Mickael's vfork() changes
v3: https://lore.kernel.org/all/20240220192235.2953484-1-kuba@kernel.org/
 - combine multiple series
 - change to "list of expected failures" rather than SKIP()-like handling
v2: https://lore.kernel.org/all/20240216002619.1999225-1-kuba@kernel.org/
 - fix alignment
follow up RFC: https://lore.kernel.org/all/20240216004122.2004689-1-kuba@kernel.org/
v1: https://lore.kernel.org/all/20240213154416.422739-1-kuba@kernel.org/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: ip_local_port_range: use XFAIL instead of SKIP

SCTP does not support IP_LOCAL_PORT_RANGE and we know it,
so use XFAIL instead of SKIP.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest_harness: support using xfail

Currently some tests report skip for things they expect to fail
e.g. when given combination of parameters is known to be unsupported.
This is confusing because in an ideal test environment and fully
featured kernel no tests should be skipped.

Selftest summary line already includes xfail and xpass counters,
e.g.:

  Totals: pass:725 fail:0 xfail:0 xpass:0 skip:0 error:0

but there's no way to use it from within the harness.

Add a new per-fixture+variant combination list of test cases
we expect to fail.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest_harness: let PASS / FAIL provide diagnostic

Switch to printing KTAP line for PASS / FAIL with ksft_test_result_code(),
this gives us the ability to report diagnostic messages.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest_harness: separate diagnostic message with # in ksft_test_result_code()

According to the spec we should always print a # if we add
a diagnostic message. Having the caller pass in the new line
as part of diagnostic message makes handling this a bit
counter-intuitive, so append the new line in the helper.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest_harness: print test name for SKIP

Jakub points out that for parsers it's rather useful to always
have the test name on the result line. Currently if we SKIP
(or soon XFAIL or XPASS), we will print:

ok 17 # SKIP SCTP doesn't support IP_BIND_ADDRESS_NO_PORT

     ^
     no test name

Always print the test name.
KTAP format seems to allow or even call for it, per:
https://docs.kernel.org/dev-tools/ktap.html

Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/87jzn6lnou.fsf@cloudflare.com/
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest: add ksft_test_result_code(), handling all exit codes

For generic test harness code it's more useful to deal with exit
codes directly, rather than having to switch on them and call
the right ksft_test_result_*() helper. Add such function to kselftest.h.

Note that "directive" and "diagnostic" are what ktap docs call
those parts of the message.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest_harness: use exit code to store skip

We always use skip in combination with exit_code being 0
(KSFT_PASS). This are basic KSFT / KTAP semantics.
Store the right KSFT_* code in exit_code directly.

This makes it easier to support tests reporting other
extended KSFT_* codes like XFAIL / XPASS.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest_harness: save full exit code in metadata

Instead of tracking passed = 0/1 rename the field to exit_code
and invert the values so that they match the KSFT_* exit codes.
This will allow us to fold SKIP / XFAIL into the same value.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest_harness: generate test name once

Since we added variant support generating full test case
name takes 4 string arguments. We're about to need it
in another two places. Stop the duplication and print
once into a temporary buffer.

Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: kselftest_harness: use KSFT_* exit codes

Now that we no longer need low exit codes to communicate
assertion steps - use normal KSFT exit codes.

Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/harness: Merge TEST_F_FORK() into TEST_F()

Replace Landlock-specific TEST_F_FORK() with an improved TEST_F() which
brings four related changes:

Run TEST_F()'s tests in a grandchild process to make it possible to
drop privileges and delegate teardown to the parent.

Compared to TEST_F_FORK(), simplify handling of the test grandchild
process thanks to vfork(2), and makes it generic (e.g. no explicit
conversion between exit code and _metadata).

Compared to TEST_F_FORK(), run teardown even when tests failed with an
assert thanks to commit 63e6b2a42342 ("selftests/harness: Run TEARDOWN
for ASSERT failures").

Simplify the test harness code by removing the no_print and step fields
which are not used.  I added this feature just after I made
kselftest_harness.h more broadly available but this step counter
remained even though it wasn't needed after all. See commit 369130b63178
("selftests: Enhance kselftest_harness.h to print which assert failed").

Replace spaces with tabs in one line of __TEST_F_IMPL().

Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/landlock: Redefine TEST_F() as TEST_F_FORK()

This has the effect of creating a new test process for either TEST_F()
or TEST_F_FORK(), which doesn't change tests but will ease potential
backports.  See next commit for the TEST_F_FORK() merge into TEST_F().

Cc: Günther Noack <gnoack@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-asp22-optimizations'

Justin Chen says:

====================
Support for ASP 2.2 and optimizations

ASP 2.2 adds some power savings during low power modes.

Also make various improvements when entering low power modes and
reduce MDIO traffic by hooking up interrupts.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmasp: Add support for PHY interrupts

Hook up the phy interrupts for internal phys to reduce mdio traffic
and improve responsiveness of link changes.

Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmasp: Keep buffers through power management

There is no advantage of freeing and re-allocating buffers through
suspend and resume. This waste cycles and makes suspend/resume time
longer. We also open ourselves to failed allocations in systems with
heavy memory fragmentation.

Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: mdio-bcm-unimac: Add asp v2.2 support

Add mdio compat string for ASP 2.0 ethernet driver.

Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmasp: Add support for ASP 2.2

ASP 2.2 improves power savings during low power modes.

A new register was added to toggle to a slower clock during low
power modes.

EEE was broken for ASP 2.0/2.1. A HW workaround was added for
ASP 2.2 that requires toggling a chicken bit.

Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: brcm,asp-v2.0: Add asp-v2.2

Add support for ASP 2.2.

Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: brcm,unimac-mdio: Add asp-v2.2

The ASP 2.2 Ethernet controller uses a brcm unimac.

Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'qcom-phy-possible'

Robert Marko says:

====================
net: phy: qcom: qca808x: fill in possible_interfaces

QCA808x does not currently fill in the possible_interfaces.

This leads to Phylink not being aware that it supports 2500Base-X as well
so in cases where it is connected to a DSA switch like MV88E6393 it will
limit that port to phy-mode set in the DTS.

That means that if SGMII is used you are limited to 1G only while if
2500Base-X was set you are limited to 2.5G only.

Populating the possible_interfaces fixes this.

Changes in v2:
* Get rid of the if/else by Russels suggestion in the helper
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: qcom: qca808x: fill in possible_interfaces

Currently QCA808x driver does not fill the possible_interfaces.
2.5G QCA808x support SGMII and 2500Base-X while 1G model only supports
SGMII, so fill the possible_interfaces accordingly.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: qcom: qca808x: add helper for checking for 1G only model

There are 2 versions of QCA808x, one 2.5G capable and one 1G capable.
Currently, this matter only in the .get_features call however, it will
be required for filling supported interface modes so lets add a helper
that can be reused.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify net_dbg_ratelimited() dummy

There is no need to wrap calls to the no_printk() helper inside an
always-false check, as no_printk() already does that internally.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ipv6-devconf-lockless'

Eric Dumazet says:

====================
ipv6: lockless accesses to devconf

- First patch puts in a cacheline_group the fields used in fast paths.

- Annotate all data races around idev->cnf fields.

- Last patch in this series removes RTNL use for RTM_GETNETCONF dumps.

v3: addressed Jakub Kicinski feedback in addrconf_disable_ipv6()
    Added tags from Jiri and Florian.

v2: addressed Jiri Pirko feedback
 - Added "ipv6: addrconf_disable_ipv6() optimizations"
   and "ipv6: addrconf_disable_policy() optimization"
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: use xa_array iterator to implement inet6_netconf_dump_devconf()

1) inet6_netconf_dump_devconf() can run under RCU protection
   instead of RTNL.

2) properly return 0 at the end of a dump, avoiding an
   an extra recvmsg() system call.

3) Do not use inet6_base_seq() anymore, for_each_netdev_dump()
   has nice properties. Restarting a GETDEVCONF dump if a device has
   been added/removed or if net->ipv6.dev_addr_genid has changed is moot.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6/addrconf: annotate data-races around devconf fields (II)

Final (?) round of this series.

Annotate lockless reads on following devconf fields,
because they be changed concurrently from /proc/net/ipv6/conf.

- accept_dad
- optimistic_dad
- use_optimistic
- use_oif_addrs_only
- ra_honor_pio_life
- keep_addr_on_down
- ndisc_notify
- ndisc_evict_nocarrier
- suppress_frag_ndisc
- addr_gen_mode
- seg6_enabled
- ioam6_enabled
- ioam6_id
- ioam6_id_wide
- drop_unicast_in_l2_multicast
- mldv[12]_unsolicited_report_interval
- force_mld_version
- force_tllao
- accept_untracked_na
- drop_unsolicited_na
- accept_source_route

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6/addrconf: annotate data-races around devconf fields (I)

Annotate lockless reads and writes on following devconf fields:

- regen_min_advance
- regen_max_retry
- dad_transmits
- use_tempaddr
- max_addresses
- max_desync_factor
- temp_valid_lft
- rtr_solicits
- rtr_solicit_max_interval
- rtr_solicit_interval
- rtr_solicit_delay
- enhanced_dad
- accept_redirects

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>