Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes a bug in that with SCTLR.A set, we should raise any
alignment fault before raising any MTE check fault.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the individual memop to gen_mte_checkN.
For the moment, do nothing with it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the completed memop to gen_mte_check1_mmuidx.
For the moment, do nothing more than extract the size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Hoist finalize_memop out of do_fp_{ld, st}
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Hoist finalize_memop out of do_gpr_{ld, st}
We are going to need the complete memop beforehand,
so let's not compute it twice.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Load/store integer pair with one tcg operation
This is required for LSE2, where the pair must be treated atomically if
it does not cross a 16-byte boundary. But it simplifies the code to do
this always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Sink gen_mte_check1 into load/store_exclusive
No need to duplicate this check across multiple call sites.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r
Round len_align to 16 instead of 8, handling an odd 8-byte as part
of the tail. Use MO_ATOM_NONE to indicate that all of these memory
ops have only byte atomicity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use tcg_gen_qemu_st_i128 for STZG, STZ2G
This fixes a bug in that these two insns should have been using atomic
16-byte stores, since MTE is ARMv8.5 and LSE2 is mandatory from ARMv8.4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Use tcg_gen_qemu_{st, ld}_i128 for do_fp_{st, ld}
While we don't require 16-byte atomicity here, using a single larger
operation simplifies the code. Introduce finalize_memop_asimd for this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While we don't require 16-byte atomicity here, using a single larger
load simplifies the code, and makes it a closer match to STXP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let finalize_memop_atom be the new basic function, with
finalize_memop and finalize_memop_pair testing FEAT_LSE2
to apply the appropriate atomicity.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Add commentary for CPUARMState.exclusive_high
Document the meaning of exclusive_high in a big-endian context,
and why we can't change it now.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qianfan Zhao [Tue, 6 Jun 2023 09:19:34 +0000 (10:19 +0100)]
docs: system: arm: Introduce bananapi_m2u
Add documents for Banana Pi M2U
Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
[PMM: Minor format fixes to correct sphinx errors] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qianfan Zhao [Tue, 6 Jun 2023 09:19:33 +0000 (10:19 +0100)]
hw: sd: allwinner-sdhost: Add sun50i-a64 SoC support
A64's sd register was similar to H3, and it introduced a new register
named SAMP_DL_REG location at 0x144. The dma descriptor buffer size of
mmc2 is only 8K and the other mmc controllers has 64K.
Also fix allwinner-r40's mmc controller type.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qianfan Zhao [Tue, 6 Jun 2023 09:19:32 +0000 (10:19 +0100)]
hw/arm/allwinner-r40: add SDRAM controller device
Types of memory that the SDRAM controller supports are DDR2/DDR3
and capacities of up to 2GiB. This commit adds emulation support
of the Allwinner R40 SDRAM controller.
This driver only support 256M, 512M and 1024M memory now.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qianfan Zhao [Tue, 6 Jun 2023 09:19:32 +0000 (10:19 +0100)]
hw: arm: allwinner-r40: Add i2c0 device
TWI(i2c) is designed to be used as an interface between CPU host and the
serial 2-Wire bus. It can support all standard 2-Wire transfer, can be
operated in standard mode(100kbit/s) or fast-mode, supporting data rate
up to 400kbit/s.
qianfan Zhao [Tue, 6 Jun 2023 09:19:31 +0000 (10:19 +0100)]
hw: arm: Add bananapi M2-Ultra and allwinner-r40 support
Allwinner R40 (sun8i) SoC features a Quad-Core Cortex-A7 ARM CPU,
and a Mali400 MP2 GPU from ARM. It's also known as the Allwinner T3
for In-Car Entertainment usage, A40i and A40pro are variants that
differ in applicable temperatures range (industrial and military).
Vikram Garhwal [Tue, 6 Jun 2023 09:19:31 +0000 (10:19 +0100)]
tests/qtest: Introduce tests for Xilinx VERSAL CANFD controller
The QTests perform three tests on the Xilinx VERSAL CANFD controller:
Tests the CANFD controllers in loopback.
Tests the CANFD controllers in normal mode with CAN frame.
Tests the CANFD controllers in normal mode with CANFD frame.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx Versal CANFD controller is developed based on SocketCAN, QEMU CAN bus
implementation. Bus connection and socketCAN connection for each CAN module
can be set through command lines.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hvf: add guest debugging handlers for Apple Silicon hosts
Guests can now be debugged through the gdbstub. Support is added for
single-stepping, software breakpoints, hardware breakpoints and
watchpoints. The code has been structured like the KVM counterpart.
While guest debugging is enabled, the guest can still read and write the
DBG*_EL1 registers but they don't have any effect.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-5-fcagnin@quarkslab.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Required for guest debugging. The code has been structured like the KVM
counterpart.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-4-fcagnin@quarkslab.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com>
Message-id: 20230601153107.81955-3-fcagnin@quarkslab.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These helpers will be also used for HVF. Aside from reformatting a
couple of comments for 'checkpatch.pl' and updating meson to compile
'hyp_gdbstub.c', this is just code motion.
Signed-off-by: Francesco Cagnin <fcagnin@quarkslab.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230601153107.81955-2-fcagnin@quarkslab.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bumping avocado to version 101 has two issues. First, there are problems
where Avocado is not logging of command lines or terminal output, and not
collecting Python logs outside the avocado namespace.
Second, the recent changes to Python handling mean that there is a single
virtual environment for all the build, instead of a separate one for testing.
Requiring a too-new version of avocado causes conflicts with any avocado
plugins installed on the host:
$ make check-venv
make[1]: Entering directory '/home/berrange/src/virt/qemu/build'
GIT ui/keycodemapdb tests/fp/berkeley-testfloat-3 tests/fp/berkeley-softfloat-3 dtc
VENVPIP install -e /home/berrange/src/virt/qemu/python/
VENVPIP install -r /home/berrange/src/virt/qemu/tests/requirements.txt
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 101.0 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 101.0 which is incompatible.
make[1]: Leaving directory '/home/berrange/src/virt/qemu/build'
To avoid this issue, tests/requirements.txt should use a ">=" constraint
and the version of Avocado should be limited to what distros provide
in the system packages. Only Fedora has Avocado, and more specifically
version 92.0 (though 98.0 is also available as a module). As a first
step, this patch reverts the introduction of a too-new Avocado.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi/qemu-pr-helper: Drop support for 'old' libmultipath API
Commit 1b0578f5c4 ("qemu-pr-helper: Fix build on CentOS 7") added
code to probe for 'old' libmultipath API on CentOS 7. However since
merge commit 8c345b3e6a (June 2021) we don't build/test CentOS 7 as
it felt out of our list of supported distrib versions. Therefore we
can safely remove the 'old' API check (mostly reverting commit 1b0578f5c4, except the code got converted to meson in commit 6ec0e15d95 "meson: move libmpathpersist test").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230605174146.87440-2-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Mon, 5 Jun 2023 11:45:23 +0000 (13:45 +0200)]
meson.build: Use -Wno-undef only for SDL2 versions that need it
There is no need to disable this useful compiler warning for
all versions of the SDL. Unfortunately, various versions are
buggy (beside SDL 2.0.8, the version 2.26.0 and 2.26.1 are
broken, too, see https://github.com/libsdl-org/SDL/issues/6619 ),
but we can use a simple compiler check to see whether we need
the -Wno-undef or not.
This also enables the printing of the version number with
good versions of the SDL in the summary of the meson output
again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230605114523.282987-1-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Fri, 2 Jun 2023 17:18:32 +0000 (19:18 +0200)]
meson.build: Group the audio backend entries in a separate summary section
Let's make it easier for the users to spot audio-related entries
in the summary of the meson output.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230602171832.533739-4-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Fri, 2 Jun 2023 17:18:31 +0000 (19:18 +0200)]
meson.build: Group the network backend entries in a separate summary section
Let's make it easier for the users to spot network-related entries
in the summary of the meson output.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230602171832.533739-3-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Fri, 2 Jun 2023 17:18:30 +0000 (19:18 +0200)]
meson.build: Group the UI entries in a separate summary section
Let's make it easier for the users to spot UI-related entries in
the summary of the meson output.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230602171832.533739-2-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 3 Jun 2023 21:09:32 +0000 (23:09 +0200)]
scripts: remove dead file
scripts/test-driver.py was used when "make check" was already using meson
introspection data, but it did not execute "meson test". It is dead since
commit 3d2f73ef75e ("build: use "meson test" as the test harness", 2021-12-23).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 3 Mar 2023 13:37:51 +0000 (14:37 +0100)]
atomics: eliminate mb_read/mb_set
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michal Privoznik [Tue, 30 May 2023 10:31:23 +0000 (12:31 +0200)]
meson: Avoid implicit declaration of absent functions
While detecting a presence of a function via 'cc.links()'
gives desired result (i.e. detects whether function is present),
it also produces a warning on systems where the function is not
present (into meson-log.txt), e.g.:
qemu.git/build/meson-private/tmph74x3p38/testfile.c:2:34: \
warning: implicit declaration of function 'malloc_trim' [-Wimplicit-function-declaration]
And some distributions (e.g. Gentoo) parse the meson log and
consider these erroneous because it can lead to feature
misdetection (see [1]).
We can check whether given function exists via
'cc.has_function()' or whether STATX_* macros exist via
'cc.has_header_symbol()'.
1: https://wiki.gentoo.org/wiki/Modern_C_porting
Resolves: https://bugs.gentoo.org/898810 Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <8e02776d18595a1c575c90a189ff65f1785f76ca.1685442612.git.mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* tag 'pull-tcg-20230605' of https://gitlab.com/rth7680/qemu: (52 commits)
tcg/tcg-op-vec: Remove left over _link_error() definitions
accel/tcg: Unmap perf_marker
tcg: Build once for system and once for user-only
exec/poison: Do not poison CONFIG_SOFTMMU
plugins: Drop unused headers from exec/plugin-gen.h
plugins: Move plugin_insn_append to translator.c
tcg: Remove target-specific headers from tcg.[ch]
tcg: Move env defines out of NEED_CPU_H in helper-head.h
tcg: Fix PAGE/PROT confusion
accel/tcg: Tidy includes for translator.[ch]
target/arm: Add missing include of exec/exec-all.h
target/*: Add missing includes of exec/translation-block.h
target/mips: Tidy helpers for translation
target/arm: Tidy helpers for translation
accel/tcg: Move translator_fake_ldb out of line
target/ppc: Inline gen_icount_io_start()
accel/tcg: Introduce translator_io_start
accel/tcg: Move most of gen-icount.h into translator.c
include/exec: Remove CODE_GEN_AVG_BLOCK_SIZE
tcg: Spit out exec/translation-block.h
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg/tcg-op-vec: Remove left over _link_error() definitions
In commit d56fea79f9 ("tcg: Move TCG_{LOW,HIGH} to tcg-internal.h")
we replaced the "_link_error" definitions with modern QEMU_ERROR()
attribute markup. We covered tcg-op.c but forgot to completely
clean tcg-op-vec.c. Do it now.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230605175647.88395-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce the header to only bswap.h and cpu_ldst.h.
Move exec/translate-all.h to translator.c.
Reduce tcg.h and tcg-op.h to tcg-op-common.h.
Remove otherwise unused headers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/log.h.
Drop otherwise unused includes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move most includes from *translate*.c to translate.h, ensuring
that we get the ordering correct. Ensure cpu.h is first.
Use disas/disas.h instead of exec/log.h.
Drop otherwise unused includes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is used by exactly one host in extraordinary circumstances.
This means that translator.h need not include plugin-gen.h;
translator.c already includes plugin-gen.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that gen_icount_io_start() is a simple wrapper to
translator_io_start(), inline it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230602095439.48102-1-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Move most of gen-icount.h into translator.c
The only usage of gen_tb_start and gen_tb_end are here.
Move the static icount_start_insn variable into a local
within translator_loop. Simplify the two subroutines
by passing in the existing local cflags variable.
Leave only the declaration of gen_io_start in gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: 2ac01d6dafab ("translate-all: use a binary search tree to track TBs in TBContext") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
exec-all: Widen TranslationBlock pc and cs_base to 64-bits
This makes TranslationBlock agnostic to the address size of the guest.
Use vaddr for pc, since that's always a virtual address.
Use uint64_t for cs_base, since usage varies between guests.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From this remove, it's no longer clear what this is attempting
to protect. The last time a use of this define was added to
the source tree, as opposed to merely moved around, was 2008.
There have been many cleanups since that time and this is
no longer required for the build to succeed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg: Move TLB_FLAGS_MASK check out of get_alignment_bits
The replacement isn't ideal, as the raw count of bits
is not easily synced with exec/cpu-all.h, but it does
remove from tcg.h the target dependency on TARGET_PAGE_BITS_MIN
which is built into TLB_FLAGS_MASK.
Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create helper-proto-common.h without the target specific portion.
Use that in tcg-op-common.h. Include helper-proto.h in target/arm
and target/hexagon before helper-info.c.inc; all other targets are
already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create helper-gen-common.h without the target specific portion.
Use that in tcg-op-common.h. Reorg headers in target/arm to
ensure that helper-gen.h is included before helper-info.c.inc.
All other targets are already correct in this regard.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This had been included via tcg-op-common.h via tcg-op.h,
but that is going away. In idef-parser.y, shuffle some
tcg related includes into a more logical order.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create tcg/tcg-op-common.h, moving everything that does not concern
TARGET_LONG_BITS or TCGv. Adjust tcg/*.c to use the new header
instead of tcg-op.h, in preparation for compiling tcg/ only once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The symbol is always defined, even if to 0. We wanted to test for
TCG_OVERSIZED_GUEST == 0.
This fixed, the #error is reached while building arm-softmmu, because
TCG_OVERSIZED_GUEST is not true (nor supposed to be true) for arm32
guest on a 32-bit host. But that's ok, because this feature doesn't
apply to arm32. Add an #ifdef for TARGET_AARCH64.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Removes the only use of TARGET_LONG_BITS from tcg.h, which is to be
target independent. Move the symbol to a define in tcg-op.h, which
will continue to be target dependent. Rather than complicate matters
for the use in tb_gen_code(), expand the definition there.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some s390x userspace programs are confused when seeing a foreign
/proc/cpuinfo [1]. Add the emulation for s390x; follow the respective
kernel code structure where possible.
Fixes: 076d4d39b65f ("s390x/cpumodel: wire up cpu type + id for TCG") Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230605113950.1169228-2-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
projects / qemu.git / log