Eugenio Pérez [Thu, 15 Dec 2022 11:31:44 +0000 (12:31 +0100)]
vdpa: always start CVQ in SVQ mode if possible
Isolate control virtqueue in its own group, allowing to intercept control
commands but letting dataplane run totally passthrough to the guest.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-13-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:43 +0000 (12:31 +0100)]
vdpa: add shadow_data to vhost_vdpa
The memory listener that thells the device how to convert GPA to qemu's
va is registered against CVQ vhost_vdpa. memory listener translations
are always ASID 0, CVQ ones are ASID 1 if supported.
Let's tell the listener if it needs to register them on iova tree or
not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-12-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:42 +0000 (12:31 +0100)]
vdpa: store x-svq parameter in VhostVDPAState
CVQ can be shadowed two ways:
- Device has x-svq=on parameter (current way)
- The device can isolate CVQ in its own vq group
QEMU needs to check for the second condition dynamically, because CVQ
index is not known before the driver ack the features. Since this is
dynamic, the CVQ isolation could vary with different conditions, making
it possible to go from "not isolated group" to "isolated".
Saving the cmdline parameter in an extra field so we never disable CVQ
SVQ in case the device was started with x-svq cmdline.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-11-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:41 +0000 (12:31 +0100)]
vdpa: add asid parameter to vhost_vdpa_dma_map/unmap
So the caller can choose which ASID is destined.
No need to update the batch functions as they will always be called from
memory listener updates at the moment. Memory listener updates will
always update ASID 0, as it's the passthrough ASID.
All vhost devices's ASID are 0 at this moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-10-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:40 +0000 (12:31 +0100)]
vdpa: allocate SVQ array unconditionally
SVQ may run or not in a device depending on runtime conditions (for
example, if the device can move CVQ to its own group or not).
Allocate the SVQ array unconditionally at startup, since its hard to
move this allocation elsewhere.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-9-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:39 +0000 (12:31 +0100)]
vdpa: move SVQ vring features check to net/
The next patches will start control SVQ if possible. However, we don't
know if that will be possible at qemu boot anymore.
Since the moved checks will be already evaluated at net/ to know if it
is ok to shadow CVQ, move them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-8-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:38 +0000 (12:31 +0100)]
vdpa: request iova_range only once
Currently iova range is requested once per queue pair in the case of
net. Reduce the number of ioctls asking it once at initialization and
reusing that value for each vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-7-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasonwang@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:37 +0000 (12:31 +0100)]
vdpa: add vhost_vdpa_net_valid_svq_features
It will be reused at vdpa device start so let's extract in its own
function.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-6-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:36 +0000 (12:31 +0100)]
vhost: move iova_tree set to vhost_svq_start
Since we don't know if we will use SVQ at qemu initialization, let's
allocate iova_tree only if needed. To do so, accept it at SVQ start, not
at initialization.
This will avoid to create it if the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-5-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:35 +0000 (12:31 +0100)]
vhost: allocate SVQ device file descriptors at device start
The next patches will start control SVQ if possible. However, we don't
know if that will be possible at qemu boot anymore.
Delay device file descriptors until we know it at device start. This
will avoid to create them if the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-4-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:34 +0000 (12:31 +0100)]
vhost: set SVQ device call handler at SVQ start
By the end of this series CVQ is shadowed as long as the features
support it.
Since we don't know at the beginning of qemu running if this is
supported, move the event notifier handler setting to the start of the
SVQ, instead of the start of qemu run. This will avoid to create them if
the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-3-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eugenio Pérez [Thu, 15 Dec 2022 11:31:33 +0000 (12:31 +0100)]
vdpa: use v->shadow_vqs_enabled in vhost_vdpa_svqs_start & stop
This function used to trust in v->shadow_vqs != NULL to know if it must
start svq or not.
This is not going to be valid anymore, as qemu is going to allocate svq
array unconditionally (but it will only start them conditionally).
Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-2-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Longpeng [Thu, 15 Dec 2022 13:49:43 +0000 (21:49 +0800)]
vdpa-dev: mark the device as unmigratable
The generic vDPA device doesn't support migration currently, so
mark it as unmigratable temporarily.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221215134944.2809-5-longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221215134944.2809-4-longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221215134944.2809-3-longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Longpeng [Thu, 15 Dec 2022 13:49:40 +0000 (21:49 +0800)]
virtio: get class_id and pci device id by the virtio id
Add helpers to get the "Transitional PCI Device ID" and "class_id"
of the device specified by the "Virtio Device ID".
These helpers will be used to build the generic vDPA device later.
Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221215134944.2809-2-longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
An 'ICH9-LPC.enable_tco' property has been exposed for a
very long time, but attempts to set it have never been
honoured.
Originally, any user provided 'enable_tco' value was force
replaced by a value passed from the machine type setup
code that was determine by machine type compat properties.
ich9: Remove enable_tco arguments from init functions
The enable_tco arguments are always true, so they are not needed
anymore.
Leaving the ich9_pm_init to just force set 'enable_tco' to true.
This still overrides any user specified property. The initialization
of property defaults should be done when properties are first
registered, rather than during object construction.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221216125749.596075-6-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/isa: enable TCO watchdog reboot pin strap by default
The TCO watchdog implementation default behaviour from POV of the
guest OS relies on the initial values for two I/O ports:
* TCO1_CNT == 0x0
Since bit 11 (TCO Timer Halt) is clear, the watchdog state
is considered to be initially running
* GCS == 0x20
Since bit 5 (No Reboot) is set, the watchdog will not trigger
when the timer expires
This is a safe default, because the No Reboot bit will prevent the
watchdog from triggering if the guest OS is unaware of its existance,
or is slow in configuring it. When a Linux guest initializes the TCO
watchdog, it will attempt to clear the "No Reboot" flag, and read the
value back. If the clear was honoured, the driver will treat this as
an indicator that the watchdog is functional and create the guest
watchdog device.
QEMU implements a second "no reboot" flag, however, via pin straps
which overrides the behaviour of the guest controlled "no reboot"
flag:
This second 'noreboot' pin was defaulted to high, which also inhibits
triggering of the requested watchdog actions, unless QEMU is launched
with the magic flag "-global ICH9-LPC.noreboot=false".
This is a bad default as we are exposing a watchdog to every guest OS
using the q35 machine type, but preventing it from actually doing what
it is designed to do. What is worse is that the guest OS and its apps
have no way to know that the watchdog is never going to fire, due to
this second 'noreboot' pin.
If a guest OS had no watchdog device at all, then apps whose operation
and/or data integrity relies on a watchdog can refuse to launch, and
alert the administrator of the problematic deployment. With Q35 machines
unconditionally exposing a watchdog though, apps will think their
deployment is correct but in fact have no protection at all.
This patch flips the default of the second 'no reboot' flag, so that
configured watchdog actions will be honoured out of the box for the
7.2 Q35 machine type onwards, if the guest enables use of the watchdog.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221216125749.596075-5-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cornelia Huck [Mon, 12 Dec 2022 15:21:45 +0000 (16:21 +0100)]
pc: clean up compat machines
We can move setting default_cpu_version into the base machine options,
and we need to unset alias and is_default only once.
Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20221212152145.124317-3-cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Cornelia Huck [Mon, 12 Dec 2022 15:21:44 +0000 (16:21 +0100)]
hw: Add compat machines for 8.0
Add 8.0 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Reviewed-by: Cédric Le Goater <clg@kaod.org> [ppc] Reviewed-by: Thomas Huth <thuth@redhat.com> [s390x] Reviewed-by: Greg Kurz <groug@kaod.org> [ppc] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20221212152145.124317-2-cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
hw/watchdog: add trace events for watchdog action handling
The tracepoints aid in debugging the triggering of watchdog devices.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221216125749.596075-4-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/isa: add trace events for ICH9 LPC chip config access
These tracepoints aid in understanding and debugging the guest drivers
for the TCO watchdog.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221216125749.596075-3-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/acpi: add trace events for TCO watchdog register access
These tracepoints aid in understanding and debugging the guest drivers
for the TCO watchdog.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221216125749.596075-2-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
accel/tcg: Restrict page_collection structure to system TB maintainance
Only the system emulation part of TB maintainance uses the
page_collection structure. Restrict its declaration (and the
functions requiring it) to tb-maint.c.
Convert the 'len' argument of tb_invalidate_phys_page_fast__locked()
from signed to unsigned.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-6-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Factor tb_invalidate_phys_range_fast() out
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-5-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emphasize this function is called with pages locked.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-4-philmd@linaro.org>
[rth: Use "__locked" suffix, to match other instances.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit d9bb58e510 ("tcg: move tcg related files into accel/tcg/
subdirectory") introduced accel/tcg/trace-events, so we don't
need to use the root trace-events anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-3-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Restrict cpu_io_recompile() to system emulation
Missed in commit 6526919224 ("accel/tcg: Restrict cpu_io_recompile()
from other accelerators").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221209093649.43738-2-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Move remainder of page locking to tb-maint.c
The only thing that still touches PageDesc in translate-all.c
are some locking routines related to tb-maint.c which have not
yet been moved. Do so now.
Move some code up in tb-maint.c as well, to untangle the maze
of ifdefs, and allow a sensible final ordering.
Move some declarations from exec/translate-all.h to internal.h,
as they are only used within accel/tcg/.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Move PageDesc tree into tb-maint.c for system
Now that PageDesc is not used for user-only, and for system
it is only used for tb maintenance, move the implementation
into tb-main.c appropriately ifdefed.
We have not yet eliminated all references to PageDesc for
user-only, so retain a typedef to the structure without definition.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Move page_{get,set}_flags to user-exec.c
This page tracking implementation is specific to user-only,
since the system softmmu version is in cputlb.c. Move it
out of translate-all.c to user-exec.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make bsd-user match linux-user in not marking host pages
as reserved. This isn't especially effective anyway, as
it doesn't take into account any heap memory that qemu
may allocate after startup.
Reviewed-by: Warner Losh <imp@bsdimp.com> Tested-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Use interval tree for TBs in user-only mode
Begin weaning user-only away from PageDesc.
Since, for user-only, all TB (and page) manipulation is done with
a single mutex, and there is no virtual/physical discontinuity to
split a TB across discontinuous pages, place all of the TBs into
a single IntervalTree. This makes it trivial to find all of the
TBs intersecting a range.
Retain the existing PageDesc + linked list implementation for
system mode. Move the portion of the implementation that overlaps
the new user-only code behind the common ifdef.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to tb_remove_all, to remove the PageDesc "page" from the name,
and to avoid suggesting a "flush" in the icache sense.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 20 Dec 2022 21:35:09 +0000 (21:35 +0000)]
Merge tag 'qga-pull-2022-12-20' of github.com:kostyanf14/qemu into staging
qga-pull-2022-12-20
# gpg: Signature made Tue 20 Dec 2022 13:57:59 GMT
# gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-pull-2022-12-20' of github.com:kostyanf14/qemu:
qga-win: choose the right libpcre version to include in MSI package
qga: map GLib log levels to system levels
qga-win: add logging to Windows event log
qga: Add initial OpenBSD and NetBSD support
qga:/qga-win: skip getting pci info for USB disks
qga:/qga-win: adding a empty PCI address creation function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 20 Dec 2022 15:32:27 +0000 (15:32 +0000)]
Merge tag 'hppa-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa patches
# gpg: Signature made Mon 19 Dec 2022 22:27:31 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Fix fid instruction emulation
target/hppa: Generate illegal instruction exception for 64-bit instructions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrey Drobyshev [Tue, 13 Dec 2022 15:13:43 +0000 (17:13 +0200)]
qga-win: choose the right libpcre version to include in MSI package
According to GLib changelog [1], since version 2.73.2 GLib is using
libpcre2 instead of libpcre. As a result, qemu-ga MSI installation
fails due to missing DLL when linked with the newer GLib.
This commit makes wixl to put the right libpcre version into the MSI
bundle: either libpcre-1.dll or libpcre2-8-0.dll, depending on the
present version of GLib.
Andrey Drobyshev [Tue, 29 Nov 2022 17:38:09 +0000 (19:38 +0200)]
qga: map GLib log levels to system levels
This patch translates GLib-specific log levels to system ones, so that
they may be used by both *nix syslog() (as a "priority" argument) and
Windows ReportEvent() (as a "wType" argument).
Currently the only codepath to write to "syslog" domain is slog()
function. However, this patch allows the interface to be extended.
Note that since slog() is using G_LOG_LEVEL_INFO level, its behaviour
doesn't change.
Originally-by: Yuri Pudgorodskiy <yur@virtuozzo.com> Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com> Tested-by: Konstantin Kostiuk <kkostiuk@redhat.com> Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Andrey Drobyshev [Tue, 29 Nov 2022 17:38:08 +0000 (19:38 +0200)]
qga-win: add logging to Windows event log
This commit allows QGA to write to Windows event log using Win32 API's
ReportEvent() [1], much like syslog() under *nix guests.
In order to generate log message definitions we use a very basic message
text file [2], so that every QGA's message gets ID 1. The tools
"windmc" and "windres" respectively are used to generate ".rc" file and
COFF object file, and then the COFF file is linked into qemu-ga.exe.
Brad Smith [Sat, 12 Nov 2022 11:40:43 +0000 (06:40 -0500)]
qga: Add initial OpenBSD and NetBSD support
qga: Add initial OpenBSD and NetBSD support
Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Helge Deller [Thu, 27 Oct 2022 17:03:05 +0000 (19:03 +0200)]
target/hppa: Fix fid instruction emulation
The fid instruction (Floating-Point Identify) puts the FPU model and
revision into the Status Register. Since those values shouldn't be 0,
store values there which a PCX-L2 (for 32-bit) or a PCX-W2 (for 64-bit)
would return. Noticed while trying to install MPE/iX.
Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target/hppa: Generate illegal instruction exception for 64-bit instructions
Qemu currently emulates a 32-bit CPU only, and crashes with this error
when it faces a 64-bit load (e.g. "ldd 0(r26),r0") or a 64-bit store
(e.g. "std r26,0(r26)") instruction in the guest:
ERROR:../qemu/tcg/tcg-op.c:2822:tcg_canonicalize_memop: code should not be reached
Add checks for 64-bit sizes and generate an illegal instruction
exception if necessary.
Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Mon, 19 Dec 2022 16:12:59 +0000 (16:12 +0000)]
Merge tag 'pull-monitor-2022-12-19' of https://repo.or.cz/qemu/armbru into staging
Monitor patches for 2022-12-19
# gpg: Signature made Mon 19 Dec 2022 15:23:44 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-monitor-2022-12-19' of https://repo.or.cz/qemu/armbru:
pci: Reject pcie_aer_inject_error -c with symbolic error status
pci: Improve do_pcie_aer_inject_error()'s error messages
pci: Rename hmp_pcie_aer_inject_error()'s local variable @err
pci: Inline do_pcie_aer_inject_error() into its only caller
pci: Move HMP command from hw/pci/pcie_aer.c to pci-hmp-cmds.c
pci: Fix silent truncation of pcie_aer_inject_error argument
pci: Move pcibus_dev_print() to pci-hmp-cmds.c
pci: Deduplicate get_class_desc()
pci: Build hw/pci/pci-hmp-cmds.c only when CONFIG_PCI
pci: Make query-pci stub consistent with the real one
pci: Move HMP commands from monitor/ to new hw/pci/pci-hmp-cmds.c
pci: Move QMP commands to new hw/pci/pci-qmp-cmds.c
pci: Clean up a few things checkpatch.pl would flag later on
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-13-armbru@redhat.com>
pci: Rename hmp_pcie_aer_inject_error()'s local variable @err
I'd like to use @err for an Error *err. Rename PCIEAERErr err to
aer_err.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-12-armbru@redhat.com>
pci: Inline do_pcie_aer_inject_error() into its only caller
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-11-armbru@redhat.com>
pci: Move HMP command from hw/pci/pcie_aer.c to pci-hmp-cmds.c
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-10-armbru@redhat.com>
pci: Fix silent truncation of pcie_aer_inject_error argument
PCI AER error status is 32 bit. The HMP command supports both
symbolic and numeric error status: anything that isn't a known
symbolic value is parsed as number with strtol(). Issues:
* Empty argument yields value zero.
* Range errors from strtol() are ignored, value is UINT32_MAX.
* Values not representable in uint32_t are silently truncated.
Fix to reject such input by switching to strtoui().
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-9-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-8-armbru@redhat.com>
pcibus_dev_print() contains a copy of get_class_desc(). Call the
function instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-7-armbru@redhat.com>
pci: Build hw/pci/pci-hmp-cmds.c only when CONFIG_PCI
We compile pci-hmp-cmds.c always, but pci-qmp-cmds.c only when
CONFIG_PCI. hw/pci/pci-stub.c keeps the linker happy when
!CONFIG_PCI. Build pci-hmp-cmds.c that way, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-6-armbru@redhat.com>
pci: Make query-pci stub consistent with the real one
QMP query-pci and HMP info pci can behave differently when there are
no PCI devices. They can report nothing, like this:
qemu-system-aarch64 -S -M spitz -display none -monitor stdio
QEMU 7.1.91 monitor - type 'help' for more information
(qemu) info pci
Or they can fail, like this:
qemu-system-microblaze -M petalogix-s3adsp1800 -display none -monitor stdio
QEMU 7.1.91 monitor - type 'help' for more information
(qemu) info pci
PCI devices not supported
They fail when none of the target's machines supports PCI, i.e. when
we're using qmp_query_pci() from hw/pci/pci-stub.c.
The error is not useful, and reporting nothing makes sense, so do that
in pci-stub.c, too.
Now qmp_query_pci() can't fail anymore. Drop the dead error handling
from hmp_info_pci().
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-5-armbru@redhat.com>
pci: Move HMP commands from monitor/ to new hw/pci/pci-hmp-cmds.c
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "PCI".
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-4-armbru@redhat.com>
pci: Move QMP commands to new hw/pci/pci-qmp-cmds.c
This moves these commands from MAINTAINERS section "QMP" to "PCI".
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-3-armbru@redhat.com>
[Commit message improved]
pci: Clean up a few things checkpatch.pl would flag later on
Fix a few style violations so that checkpatch.pl won't complain when I
move this code.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-2-armbru@redhat.com>
# gpg: Signature made Sun 18 Dec 2022 17:48:54 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-misc-20221218' of https://gitlab.com/rth7680/qemu:
target/tricore: Fix gdbstub write to address registers
target/sh4: Mask restore of env->flags from tb->flags
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/tricore: Fix gdbstub write to address registers
Typo had double-writes to data registers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1363 Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Guenter Roeck [Mon, 12 Dec 2022 15:03:17 +0000 (09:03 -0600)]
target/sh4: Mask restore of env->flags from tb->flags
The values in env->flags are a subset of tb->flags.
Restore only the bits that belong.
Cc: qemu-stable@nongnu.org Fixes: ab419fd8a035 ("target/sh4: Fix TB_FLAG_UNALIGN") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20221212011345.GA2235238@roeck-us.net>
[rth: Reduce to only the the superh_cpu_synchronize_from_tb change] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Sun, 18 Dec 2022 17:02:11 +0000 (17:02 +0000)]
Merge tag 'pull-hex-20221216-1' of https://github.com/quic/qemu into staging
1)
Performance improvement
Add pkt and insn to DisasContext
Many functions need information from all 3 structures, so merge
them together.
2)
Bug fix
Fix predicated assignment to .tmp and .cur
3)
Performance improvement
Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
These functions will not be handled by idef-parser
4-11)
The final 8 patches improve change-of-flow handling.
Currently, we set the PC to a new address before exiting a TB. The
ultimate goal is to use direct block chaining. However, several steps
are needed along the way.
4)
When a packet has more than one change-of-flow (COF) instruction, only
the first one taken is considered. The runtime bookkeeping is only
needed when there is more than one COF instruction in a packet.
5, 6)
Remove PC and next_PC from the runtime state and always use a
translation-time constant. Note that next_PC is used by call instructions
to set LR and by conditional COF instructions to set the fall-through
address.
7, 8, 9)
Add helper overrides for COF instructions. In particular, we must
distinguish those that use a PC-relative address for the destination.
These are candidates for direct block chaining later.
10)
Use direct block chaining for packets that have a single PC-relative
COF instruction. Instead of generating the code while processing the
instruction, we record the effect in DisasContext and generate the code
during gen_end_tb.
11)
Use direct block chaining for tight loops. We look for TBs that end
with an endloop0 that will branch back to the TB start address.
12-21)
Instruction definition parser (idef-parser) from rev.ng
Parses the instruction semantics and generates TCG
# gpg: Signature made Fri 16 Dec 2022 20:41:53 GMT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20221216-1' of https://github.com/quic/qemu: (21 commits)
target/hexagon: import additional tests
target/hexagon: call idef-parser functions
target/hexagon: import parser for idef-parser
target/hexagon: import lexer for idef-parser
target/hexagon: prepare input for the idef-parser
target/hexagon: introduce new helper functions
target/hexagon: make helper functions non-static
target/hexagon: make slot number an unsigned
target/hexagon: import README for idef-parser
target/hexagon: update MAINTAINERS for idef-parser
Hexagon (target/hexagon) Use direct block chaining for tight loops
Hexagon (target/hexagon) Use direct block chaining for direct jump/branch
Hexagon (target/hexagon) Add overrides for various forms of jump
Hexagon (target/hexagon) Add overrides for compound compare and jump
Hexagon (target/hexagon) Add overrides for direct call instructions
Hexagon (target/hexagon) Remove next_PC from runtime state
Hexagon (target/hexagon) Remove PC from the runtime state
Hexagon (target/hexagon) Only use branch_taken when packet has multi cof
Hexagon (target/hexagon) Add overrides for S2_asr_r_r_sat/S2_asl_r_r_sat
Hexagon (target/hexagon) Fix predicated assignment to .tmp and .cur
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sun, 18 Dec 2022 13:53:29 +0000 (13:53 +0000)]
Merge tag 'pull-loongarch-20221215' of https://gitlab.com/gaosong/qemu into staging
Add cfi01 pflash device
# gpg: Signature made Thu 15 Dec 2022 07:49:03 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20221215' of https://gitlab.com/gaosong/qemu:
hw/loongarch/virt: Add cfi01 pflash device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sat, 17 Dec 2022 14:12:52 +0000 (14:12 +0000)]
Merge tag 'pull-target-arm-20221216' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
reset refactoring queue:
* remove uses of qdev_reset_all(), qbus_reset_all(), device_legacy_reset()
* convert various devices to 3-phase reset, so we can remove their
uses of device_class_set_parent_reset()
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Niccolò Izzo <nizzo@rev.ng> Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-12-anjo@rev.ng>
Extend gen_tcg_funcs.py in order to emit calls to the functions emitted
by the idef-parser, if available.
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-11-anjo@rev.ng>
Anton Johansson [Fri, 23 Sep 2022 17:38:29 +0000 (19:38 +0200)]
target/hexagon: import parser for idef-parser
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Paolo Montesel <babush@rev.ng> Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-10-anjo@rev.ng>
Paolo Montesel [Fri, 23 Sep 2022 17:38:28 +0000 (19:38 +0200)]
target/hexagon: import lexer for idef-parser
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Paolo Montesel <babush@rev.ng> Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-9-anjo@rev.ng>
Introduce infrastructure necessary to produce a file suitable for being
parsed by the idef-parser. A build option is also added to fully disable
the output of idef-parser, which is useful for debugging.
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-8-anjo@rev.ng>
These helpers will be employed by the idef-parser generated code, to
correctly implement instruction semantics. "Helper" functions, in the
context of this patch, refers to functions which provide a manual TCG
implementation of certain features.
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Niccolò Izzo <nizzo@rev.ng> Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-6-anjo@rev.ng>
Paolo Montesel [Fri, 23 Sep 2022 17:38:24 +0000 (19:38 +0200)]
target/hexagon: make helper functions non-static
Make certain helper functions non-static, making them available outside
genptr.c. These functions are required by code generated by the
idef-parser.
This commit also makes some functions in op_helper.c non-static in order
to avoid having them marked as unused when using the idef-parser
generated code.
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Paolo Montesel <babush@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-5-anjo@rev.ng>
Paolo Montesel [Fri, 23 Sep 2022 17:38:23 +0000 (19:38 +0200)]
target/hexagon: make slot number an unsigned
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Paolo Montesel <babush@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-4-anjo@rev.ng>
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-3-anjo@rev.ng>
target/hexagon: update MAINTAINERS for idef-parser
Signed-off-by: Alessandro Di Federico <ale@rev.ng> Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220923173831.227551-2-anjo@rev.ng>
Taylor Simpson [Thu, 10 Nov 2022 17:49:35 +0000 (09:49 -0800)]
Hexagon (target/hexagon) Use direct block chaining for tight loops
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Hexagon inner loops end with the endloop0 instruction
To go back to the beginning of the loop, this instructions writes to PC
from register SA0 (start address 0). To use direct block chaining, we
have to assign PC with a constant value. So, we specialize the code
generation when the start of the translation block is equal to SA0.
When this is the case, we defer the compare/branch from endloop0 to
gen_end_tb. When this is done, we can assign the start address of the TB
to PC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-12-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:05 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Use direct block chaining for direct jump/branch
Direct block chaining is documented here
https://qemu.readthedocs.io/en/latest/devel/tcg.html#direct-block-chaining
Recall that Hexagon allows packets with multiple jumps where only the
first one with a true predicate will actually jump. We can use
tcg_gen_goto_tb/tcg_gen_exit_tb when the packet contains a single
PC-relative branch or jump. If not, we use tcg_gen_lookup_and_goto_ptr.
We add the following to DisasContext in order to delay the branching
until the end of packet commit (in gen_end_tb)
branch_cond
The TCGCond condition under which the branch is taken
When branch_cond == TCG_COND_NEVER, there isn't a single
direct branch in this packet.
When branch_cond != TCG_COND_ALWAYS, the value is in
hex_branch_taken
branch_dest
The destination of the branch
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-11-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:04 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Add overrides for various forms of jump
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-10-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:03 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Add overrides for compound compare and jump
Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-9-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:02 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Add overrides for direct call instructions
Add overrides for
J2_call
J2_callt
J2_callf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-8-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:01 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Remove next_PC from runtime state
The imported files don't properly mark all CONDEXEC instructions, so
we add some logic to hex_common.py to add the attribute.
Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-7-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:29:00 +0000 (08:29 -0800)]
Hexagon (target/hexagon) Remove PC from the runtime state
Add pc field to Packet structure
For helpers that need PC, pass an extra argument
Remove slot arg from conditional jump helpers
On a trap0, copy pkt->pc into hex_gpr[HEX_REG_PC]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-6-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:28:59 +0000 (08:28 -0800)]
Hexagon (target/hexagon) Only use branch_taken when packet has multi cof
When a packet has more than one change-of-flow instruction, only the first
one to branch is considered. We use the branch_taken variable to keep
track of this.
However, when there is a single cof instruction, we don't need the same
amount of bookkeeping.
We add the pkt_has_multi_cof member to the Packet structure, and pass this
information to the needed functions.
When there is a generated helper function with cof, the generator will
pass this pkt_has_multi_cof as a runtime value.
Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-5-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:28:57 +0000 (08:28 -0800)]
Hexagon (target/hexagon) Fix predicated assignment to .tmp and .cur
Here are example instructions with a predicated .tmp/.cur assignment
if (p1) v12.tmp = vmem(r7 + #0)
if (p0) v12.cur = vmem(r9 + #0)
The .tmp/.cur indicates that references to v12 in the same packet
take the result of the load. However, when the predicate is false,
the value at the start of the packet should be used. After the packet
commits, the .tmp value is dropped, but the .cur value is maintained.
To fix this bug, we preload the original value from the HVX register
into the temporary used for the result.
Test cases added to tests/tcg/hexagon/hvx_misc.c
Acked-by: Richard Henderson <richard.henderson@linaro.org> Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com> Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-3-tsimpson@quicinc.com>
Taylor Simpson [Tue, 8 Nov 2022 16:28:56 +0000 (08:28 -0800)]
Hexagon (target/hexagon) Add pkt and insn to DisasContext
This enables us to reduce the number of parameters to many functions
In particular, the generated functions previously took all 3 as arguments
Not only does this simplify the code, it improves the translation time
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20221108162906.3166-2-tsimpson@quicinc.com>
Peter Maydell [Fri, 25 Nov 2022 11:52:40 +0000 (11:52 +0000)]
hw/pci-host/pnv_phb3_msi: Convert TYPE_PHB3_MSI to 3-phase reset
Convert the TYPE_PHB3_MSI class to 3-phase reset, so we can
avoid using the device_class_set_parent_reset() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-8-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:39 +0000 (11:52 +0000)]
hw/intc/xics: Convert TYPE_ICS to 3-phase reset
Convert the TYPE_ICS class to 3-phase reset; this will allow us
to convert the TYPE_PHB3_MSI class which inherits from it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-7-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:38 +0000 (11:52 +0000)]
hw/intc/xics: Reset TYPE_ICS objects with device_cold_reset()
The realize method for the TYPE_ICS class uses qemu_register_reset()
to register a reset handler, as a workaround for the fact that
currently objects which directly inherit from TYPE_DEVICE don't get
automatically reset. However, the reset function directly calls
ics_reset(), which is the function that implements the legacy reset
method. This means that only the parent class's data gets reset, and
a subclass which also needs to handle reset, like TYPE_PHB3_MSI, has
to register its own reset function.
Make the TYPE_ICS reset function call device_cold_reset() instead:
this will handle reset for both the parent class and the subclass,
and will work whether the classes are using legacy reset or 3-phase
reset. This allows us to remove the reset function that the subclass
currently has to set up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-6-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:37 +0000 (11:52 +0000)]
pci: Convert child classes of TYPE_PCIE_ROOT_PORT to 3-phase reset
Convert the TYPE_CXL_ROOT_PORT and TYPE_PNV_PHB_ROOT_PORT classes to
3-phase reset, so they don't need to use the deprecated
device_class_set_parent_reset() function any more.
We have to do both in the same commit, because they keep the
parent_reset field in their common parent class's class struct.
Note that pnv_phb_root_port_class_init() was pointlessly setting
dc->reset twice, once by calling device_class_set_parent_reset()
and once directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-5-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:36 +0000 (11:52 +0000)]
pci: Convert TYPE_PCIE_ROOT_PORT to 3-phase reset
Convert the TYPE_PCIE_ROOT_PORT device to 3-phase reset; this is a
necessary precursor to converting any of its child classes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-4-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:35 +0000 (11:52 +0000)]
hw/display/virtio-vga: Convert TYPE_VIRTIO_VGA_BASE to 3-phase reset
Convert the TYPE_VIRTIO_VGA_BASE class to 3-phase reset, so we
don't need to use device_class_set_parent_reset() any more.
Note that this is an abstract class itself; none of the subclasses
override its reset method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-3-peter.maydell@linaro.org
Peter Maydell [Fri, 25 Nov 2022 11:52:34 +0000 (11:52 +0000)]
hw/virtio: Convert TYPE_VIRTIO_PCI to 3-phase reset
Convert the TYPE_VIRTIO_PCI class to 3-phase reset. This is
necessary so that we can convert the subclass TYPE_VIRTIO_VGA_BASE
also to 3-phase reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-2-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:22 +0000 (11:50 +0000)]
target/xtensa: Convert to 3-phase reset
Convert the xtensa CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-20-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:21 +0000 (11:50 +0000)]
target/tricore: Convert to 3-phase reset
Convert the tricore CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-19-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:20 +0000 (11:50 +0000)]
target/sparc: Convert to 3-phase reset
Convert the sparc CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-18-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:19 +0000 (11:50 +0000)]
target/sh4: Convert to 3-phase reset
Convert the sh4 CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-17-peter.maydell@linaro.org
Peter Maydell [Thu, 24 Nov 2022 11:50:18 +0000 (11:50 +0000)]
target/rx: Convert to 3-phase reset
Convert the rx CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-id: 20221124115023.2437291-16-peter.maydell@linaro.org
projects / qemu.git / log