From 0a2b96e42a0284c4fc03022236f656a085ca714a Mon Sep 17 00:00:00 2001 From: Xiaolei Wang Date: Wed, 26 Jul 2023 15:57:47 +0800 Subject: [PATCH] ARM: dts: imx: Set default tuning step for imx6sx usdhc If the tuning step is not set, the tuning step is set to 1. For some sd cards, the following Tuning timeout will occur. Tuning failed, falling back to fixed sampling clock So set the default tuning step. This refers to the NXP vendor's commit below: https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/ arch/arm/boot/dts/imx6sx.dtsi#L1108-L1109 Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting") Signed-off-by: Xiaolei Wang Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/imx/imx6sx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index 41c9009297580..a05069d49cb88 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -1009,6 +1009,8 @@ <&clks IMX6SX_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1021,6 +1023,8 @@ <&clks IMX6SX_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1033,6 +1037,8 @@ <&clks IMX6SX_CLK_USDHC3>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; -- 2.30.2