From 0b4de2523f281b0492de3427da82495bfca6f263 Mon Sep 17 00:00:00 2001
From: Hakan Jansson <hakan.jansson@infineon.com>
Date: Mon, 30 May 2022 17:02:17 +0200
Subject: [PATCH] dt-bindings: net: broadcom-bluetooth: Add property for
autobaud mode
Add property, "brcm,requires-autobaud-mode", to enable autobaud mode
selection.
Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate when first powered on.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
.../devicetree/bindings/net/broadcom-bluetooth.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
index 5aac094fd2172..0a58d0fbcbc4b 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
@@ -92,6 +92,13 @@ properties:
pcm-sync-mode: slave, master
pcm-clock-mode: slave, master
+ brcm,requires-autobaud-mode:
+ type: boolean
+ description:
+ Set this property if autobaud mode is required. Autobaud mode is required
+ if the device's initial baud rate in normal mode is not supported by the
+ host or if the device requires autobaud mode startup before loading FW.
+
interrupts:
items:
- description: Handle to the line HOST_WAKE used to wake
--
2.30.2