From 1288f819d6c7e3dc2e301728cb7fa9a99a718234 Mon Sep 17 00:00:00 2001 From: Stefan Eichenberger Date: Fri, 5 Apr 2024 18:07:20 +0200 Subject: [PATCH] arm64: dts: freescale: imx8mm-verdin-dahlia: support sleep-moci Previously, we had the sleep-moci pin set to always on. However, the Dahlia carrier board supports disabling the sleep-moci when the system is suspended to power down peripherals that support it. This reduces overall power consumption. This commit adds support for this feature by disabling the reg_force_sleep_moci regulator and adding two new regulators for the USB hub and PCIe that can be turned off when the system is suspended. Signed-off-by: Stefan Eichenberger Reviewed-by: Francesco Dolcini Signed-off-by: Shawn Guo --- .../dts/freescale/imx8mm-verdin-dahlia.dtsi | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi index b64dac4f29c23..393fc9e204232 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi @@ -32,6 +32,25 @@ sound-dai = <&sai2>; }; }; + + reg_usb_hub: regulator-usb-hub { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + regulator-name = "HUB_PWR_EN"; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + regulator-name = "PCIE_1_PWR_EN"; + startup-delay-us = <100000>; + }; }; /* Verdin SPI_1 */ @@ -98,6 +117,7 @@ /* Verdin PCIE_1 */ &pcie0 { + vpcie-supply = <®_pcie>; status = "okay"; }; @@ -120,6 +140,11 @@ status = "okay"; }; +/* We support turning off sleep moci on Dahlia */ +®_force_sleep_moci { + status = "disabled"; +}; + /* Verdin I2S_1 */ &sai2 { status = "okay"; @@ -148,8 +173,16 @@ /* Verdin USB_2 */ &usbotg2 { + #address-cells = <1>; + #size-cells = <0>; disable-over-current; status = "okay"; + + usb-hub@1 { + compatible = "usb424,2744"; + reg = <1>; + vdd-supply = <®_usb_hub>; + }; }; /* Verdin SD_1 */ -- 2.30.2