From 1a1c3d794ef65ef2978c5e65e1aed3fe6f014e90 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Tue, 12 Sep 2023 17:32:07 +0100 Subject: [PATCH] ASoC: cs35l56: Use PCI SSID as the firmware UID If the driver properties do not define a cirrus,firmware-uid try to get the PCI SSID as the UID. On PCI-based systems the PCI SSID is used to uniquely identify the specific sound hardware. This is the standard mechanism for x86 systems and is the way to get a unique system identifier for systems that use the CS35L56 on SoundWire. For non-SoundWire systems there is no Windows equivalent of the ASoC driver in I2C/SPI mode. These would be: 1. HDA systems, which are handled by the HDA subsystem. 2. Linux-specific systems. 3. Composite devices where the cs35l56 is not present in ACPI and is configured using software nodes. Case 2 can use the firmware-uid property, though the PCI SSID is supported as an alternative, as it is the standard PCI mechanism. Case 3 is a SoundWire system where some other codec is the SoundWire bridge device and CS35L56 is not listed in ACPI. As these are SoundWire systems they will normally use the PCI SSID. Signed-off-by: Richard Fitzgerald Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20230912163207.3498161-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs35l56.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index 600b79c62ec48..a0006419ba581 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -772,9 +772,20 @@ static int cs35l56_component_probe(struct snd_soc_component *component) { struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(component); struct dentry *debugfs_root = component->debugfs_root; + unsigned short vendor, device; BUILD_BUG_ON(ARRAY_SIZE(cs35l56_tx_input_texts) != ARRAY_SIZE(cs35l56_tx_input_values)); + if (!cs35l56->dsp.system_name && + (snd_soc_card_get_pci_ssid(component->card, &vendor, &device) == 0)) { + cs35l56->dsp.system_name = devm_kasprintf(cs35l56->base.dev, + GFP_KERNEL, + "%04x%04x", + vendor, device); + if (!cs35l56->dsp.system_name) + return -ENOMEM; + } + if (!wait_for_completion_timeout(&cs35l56->init_completion, msecs_to_jiffies(5000))) { dev_err(cs35l56->base.dev, "%s: init_completion timed out\n", __func__); -- 2.30.2