From 2792aed16ca7e594916893698f526ff31eeed237 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 16 Oct 2022 02:36:32 +0200 Subject: [PATCH] drm/bridge: tc358767: Enable DSI burst mode, LPM, non-continuous clock The TC358767/TC358867/TC9595 are capable of DSI burst mode, which is more energy efficient than the non-burst modes. Make use of it. The TC358767/TC358867/TC9595 are capable of DSI non-continuous clock, since it sources the internal PLL clock from external clock source. The DSI non-continuous clock further reduces power utilization. The TC358767/TC358867/TC9595 may use DSI LPM for command transmissions, make sure this is configured correctly in the DSI mode flags. Signed-off-by: Marek Vasut Acked-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20221016003632.406468-1-marex@denx.de --- drivers/gpu/drm/bridge/tc358767.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 6d16ec45ea614..91f7cb56a654d 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -1896,10 +1896,10 @@ static int tc_mipi_dsi_host_attach(struct tc_data *tc) "failed to create dsi device\n"); tc->dsi = dsi; - dsi->lanes = dsi_lanes; dsi->format = MIPI_DSI_FMT_RGB888; - dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS; ret = mipi_dsi_attach(dsi); if (ret < 0) { -- 2.30.2