From 2e4da7eab473585c1a041b3e2e106ea99a684747 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Nov 2020 12:57:13 +0200 Subject: [PATCH] ARM: dts: Use simple-pm-bus for genpd for am4 l4_per We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-l4.dtsi | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index ab962fc1dcbfe..dfbededcb2c4e 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -610,7 +610,10 @@ }; &l4_per { /* 0x48000000 */ - compatible = "ti,am4-l4-per", "simple-bus"; + compatible = "ti,am4-l4-per", "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -628,7 +631,7 @@ <0x46400000 0x46400000 0x400000>; /* l3 data port */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1203,7 +1206,7 @@ }; segment@100000 { /* 0x48100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 34 */ @@ -1634,7 +1637,7 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00200000 0x010000>; @@ -1658,7 +1661,7 @@ }; segment@300000 { /* 0x48300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00300000 0x001000>, /* ap 56 */ -- 2.30.2