From 35529cc009967c7fe3cb96da8f2b31bd966f6e14 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 24 Apr 2020 18:12:41 +0300 Subject: [PATCH] ARM: dts: beagle-x15-common: Add CMA pools and enable IPU & DSP rprocs The CMA reserved memory nodes have been added for all the IPU and DSP remoteproc devices on all the AM57xx BeagleBoard-X15 boards. These nodes are assigned to the respective rproc device nodes, and all the IPU and DSP remote processors are enabled for all these boards. The current CMA pools and sizes are defined statically for each device. The addresses chosen are the same as the respective processors on the DRA7 EVM board to maintain firmware compatibility between the two boards. The CMA pools and sizes are defined using 64-bit values to support LPAE. The starting addresses are fixed to meet current dependencies on the remote processor firmwares, and this will go away when the remote-side code has been improved to gather this information runtime during its initialization. An associated pair of the rproc node and its CMA node can be disabled later on if there is no use-case defined to use that remote processor. Signed-off-by: Suman Anna Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- .../boot/dts/am57xx-beagle-x15-common.dtsi | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 33bb89eee6583..9cfdc29c283df 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -51,6 +51,40 @@ regulator-boot-on; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + + dsp2_memory_region: dsp2-memory@9f000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9f000000 0x0 0x800000>; + reusable; + status = "okay"; + }; + }; + vdd_3v3: fixedregulator-vdd_3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; @@ -584,3 +618,23 @@ tx-num-evt = <32>; rx-num-evt = <32>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_memory_region>; +}; -- 2.30.2