From 382256b219fbc901a69481e5b60812556f53152e Mon Sep 17 00:00:00 2001 From: Andrej Picej Date: Mon, 6 Dec 2021 07:47:31 +0100 Subject: [PATCH] dt-bindings: watchdog: da9062: add watchdog timeout mode Document the watchdog timeout mode property. If this property is used the user can select what happens on watchdog timeout. Set this property to 1 to enable SHUTDOWN (the device resets), set it to 0 and the device will go to POWERDOWN on watchdog timeout. If this property is not set, don't touch the WATCHDOG_SD bit and leave the configuration to OTP. This way backward compatibility is not broken. Signed-off-by: Andrej Picej Reviewed-by: Adam Thomson Acked-by: Rob Herring Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20211206064732.280375-4-andrej.picej@norik.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- Documentation/devicetree/bindings/watchdog/da9062-wdt.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt index 950e4fba8dbc7..354314d854ef7 100644 --- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt @@ -10,6 +10,12 @@ Optional properties: - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. Only use this option if you can't use the watchdog automatic suspend function during a suspend (see register CONTROL_B). +- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the + watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers + POWERDOWN. Can be 0 or 1. Only use this option if you want to change the + default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT + set the WATCHDOG_SD bit and on timeout watchdog behavior will match the + chip's OTP settings. Example: DA9062 -- 2.30.2